Answer:
plasma is the 4th state
Answer:
plasma in the 4th state
Explanation:
Calculate the TOTAL mechanical energy of pendulum is it swings from his highest point to its lowest point. Pendulum mass is 4 kg. Use your equations for gravitational potential energy and kinetic energy to determine these values based on the data given below. Total energy is the sum of gravitational potential energy and kinetic energy. In this problem, round gravity to: g = 10 m/s^2.
Answer:
its should be 2.0 and 4.5 on it
HELP RN PLEASSEEE!!! HELP!!
Choose all the answers that apply.
According to Newton's second law of motion:
1.objects at rest will remain at rest unless acted upon by an outside force
2.mass has an inverse relationship with acceleration
3.the greater the magnitude of force, the faster the acceleration
4.acceleration is caused by unbalanced forces
5.every action has an equal and opposite reaction
Choose the law that BEST explains the example:
Throwing a ball with more force to increase acceleration is an example of Newton’s
first law?
2nd law
third law
none of these
Will was riding his bike when a dog ran out in front of him. He slammed on his brakes. During this quick stop, some of the mechanical energy (his motion) was changed into
A) heat energy.
B) light energy.
C) kinetic energy.
D) gravitational energy.
Answer:
A
Explanation:
big brain
During this quick stop, some of the mechanical energy (his motion) was changed into heat energy.
What is energy?Energy is the ability to do work. There are different types of energy such as Heat energy, light energy, kinetic energy, and gravitational energy.
Heat is the energy that moves from one body to another when temperatures are different. Heat passes from the hotter to the colder body when two bodies with differing temperatures are brought together.
The joule is a unit of energy that serves as the SI unit for heat (J). The calorie (cal), which is defined as "the amount of heat necessary to raise the temperature of one gram of water from 14.5 degrees Celsius to 15.5 degrees Celsius," is another common unit of heat measurement.
Therefore, During this quick stop, some of the mechanical energy (his motion) was changed into heat energy.
To learn more about heat energy, refer to the link:
https://brainly.com/question/20038450
#SPJ6
2. A police car drives from a police station to a distance of 170 km in 4 hours. He then stops at a gas station for 1 hour to fill gas and rest. Then the driver goes for 100 Km in 1 hour 30 minutes to his final destination.
a. What is the speed of the police car between the police station and the gas station?
b. What is the speed of the police car between the gas station and the final destination?
c. What is the average speed of the police car?
Answer:
a.42.5 km/h or .71 km/m
b. 66.7 km/h or 1.1repeating km/m
c.41.5 km/h or .69 km/m
Explanation:
These are all average speed problems, meaning you divide the distance traveled by the time [tex]s=\frac{d}{t}[/tex]
A. 170km/4hrs or 170km/240 mins
B. 100km/1.5hrs or 100km/90mins
C. The only tricky thing here is the question seems like it wants the speed for all of the information given, so you do include the one hour that he stops
270km/6.5 hrs or 270km/390 mins
A wagon with a mass of 35 kg is pulled so that it accelerates from 0 m/s to 30 m/s in 15
seconds.
Remember to show all work!
a. What is the acceleration of the wagon?
b. What is the force required to get this acceleration?
Plz help me
Explanation:
a = v-u/t
a is the acceleration of the body
v is the final velocity
u is the initial velocity
t is the time
Given
v = 30m/s
u = 0m/s
t = 15secs
Substitute
a = 30-0/15
a = 30/15
a = 2m/s²
Hence the acceleration of the wagon is 2m/s²
b) Force = mass * acceleration
Given
Mas of the wagon = 35kg
acceleration a = 2m/s²
F = 35*2
F = 70N
Hence the force required to get this acceleration is 70N
When performing a standard push-up, our hands should be placed on the ground... as close together as possible to make it the most challenging as close together as possible to make it the most challenging really wide to focus on chest development really wide to focus on chest development just outside our shoulders
Answer:
Kindly check the explanation section.
Explanation:
The statement given in the question or problem above is true or let's say it is correct. And the statement describes different kinds or types of push up.
Push up is a kind of excercise that is being done mainly to strengthen the arm and the cheat. The way one goes about it determines which part of the body one is strengthening.
The kind of push up in which one has to close up the gap between his or hands is known as the close push ups. This kind of push up strengthens the arm more than the other part of the body and the more one puts his or her hands closer the more problematic the push up excercise becomes.
Other types or kinds of push ups are the Slow Eccentric Push Ups, Wide Push Ups, Staggered Push Ups, T push ups, Fingertip Push Ups and many more.
a pulling force carried by a rope is called what
Answer:
The pulling force that acts along a stretched flexible connector, such as a rope or cable, is called tension, T. When a rope supports the weight of an object that is at rest, the tension in the rope is equal to the weight of the object: T = mg.
Explanation:
If a train goes at constant speed of 40 miles per hour for one hour, then at constant
speed of 55 miles per hour for two hours, what is its average speed at the train?
Answer: because the train goes 72 mph for 2 hours
Explanation:
does the train go 72mph for 2 hours as well? if so the answer would be 324 because you have to add 90 twice scene it goes at that speed for 2 hours thats 180. assuming the train goes 72 mph for 2 hours it would be 144. then add 180 and 144 and you get 324 merry christmas and a happy newyear to you and your family
A rocket lifts vertically off the launching pad and reaches a final velocity of 450 m/s in 15 seconds. What is its acceleration
Answer:
The answer is 30 m/s²Explanation:
The acceleration of an object given it's velocity and time taken can be found by using the formula
[tex]a = \frac{v}{t} \\ [/tex]
where
v is the velocity
t is the time
From the question
v = 450 m/s
t = 15 s
We have
[tex]a = \frac{450}{15} \\ [/tex]
We have the final answer as
30 m/s²Hope this helps you
a car slows down from 50.0m/s to 20.0m/s in 60s what is the acceleration
Answer:
-2m/s^2
Explanation:
final velocity = 20m/s
initial velocity = 50 m/s
time taken = 60 s
20-50=30m/s
30/60 = -2
Forensic Science-Glass
Glass fragments may adhere to __ or __ used in
a break-in.
Answer:
a
Explanation:
i had this question on edge its the first one
idk actually
What is the weight of a body at a centre of Earth
An apple is dropped from a 260m high building. How long will it take to hit the ground in
seconds)?
Answer:
7.28 s
Explanation:
s=-260
u=0
assume a=-9.81
t=?
s=1/2at^2 + ut
-260=1/2 (-9.81) t^2 +0t
t=7.28 s
The time taken for the apple to hit the ground from the high building is 7.28s.
Given the data in the question;
Before the apple was dropped, it was initially at rest, so
Initial velocity; [tex]u = 0 m/s[/tex]Distance or height from which it was dropped from; [tex]s = 260m[/tex]
To find the time it will take for the apple to hit the ground
We use the Second Equation of Motion:
[tex]s = u^2 + \frac{1}{2}at^2[/tex]
Where s is the distance or height from which it was dropped, u is its initial velocity, t is time and a is the acceleration due to gravity.
We know that earth's gravitational field or acceleration due to gravity; [tex]g = 9.8m/s^2[/tex]
Since the apple is falling, it under gravity; [tex]a = g = 9.8m/s^2[/tex]
We substitute our values into the equation and find t
[tex]260m = (0m/s)^2 + (\frac{1}{2} \ *\ 9.8m/s^2\ *\ t^2 )\\\\260m = 4.9m/s^2 \ * \ t^2\\\\t^2 = \frac{260m}{4.9m/s^2}\\\\t^2 = 53.06^2\\\\t = \sqrt{53.06s^2} \\\\t = 7.28s[/tex]
Therefore, the time taken for the apple to hit the ground from the high building is 7.28s
Learn more; https://brainly.com/question/20534444
The amount of matter in a substance or object is called:
??? What the answer
Answer:
mass!!
Explanation:
At a race car driving event, a staff member notices that the skid marks left by the race car are 9.06 m long. The very experienced staff member knows that the deceleration of a car when skidding is -40.52 m/s2. What can the staff member estimate for the original speed of the race car if it came to a stop during the skid?
Answer:
27.1 m/s
Explanation:
Given that at a race car driving event, a staff member notices that the skid marks left by the race car are 9.06 m long. The very experienced staff member knows that the deceleration of a car when skidding is -40.52 m/s2.
Using third equation of motion,
V^2 = U^2 + 2aS
Since the car is decelerating, the final velocity V = 0
Substitute all the parameter into the equation above,
0 = U^2 - 2 * 40.52 * 9.06
U^2 = 734.22
U = [tex]\sqrt{734.22}[/tex]
U = 27.096
U = 27.1 m/s approximately
Therefore, the staff member can estimate for the original speed of the race car to be 27.1 m/s if it came to a stop during the skid
POSSIBLE POINTS: 5
A student throws a ball upward with a force of 50.0 Newtons. The ball reaches a maximum height of 15.0 meters in 2 seconds and then returns back to
his hands. What is the direction of the acceleration at the top?
There is no acceleration at the top
O The acceleration is directed upwards away from the Earth
O The acceleration is directed downwards towards the Earth
O None of the above
Answer:
A
Explanation:
Given that a student throws a ball upward with a force of 50.0 Newtons. The ball reaches a maximum height of 15.0 meters in 2 seconds and then returns back to
his hands.
At maximum height which is the top, the velocity is equal to zero.
According to definition of acceleration, which says; the rate of change of velocity.
Since velocity equal zero, acceleration also will be equal to zero.
Therefore, there is no acceleration at the top.
Help PLZ ;)
If the distance between two objects increases, what happens to the force of gravity between them?
(A) Increases
(B) Decreases
(C) Stays the same
Answer:
B) Decreases
Explanation:
Gravitational force is inversely proportional to distance. As distance between 2 objects increase, gravitational force between the 2 objects decreases.
Hope this helps!
Answer:
The answer would be B
Explanation:
paper craft wall hanging how is it ?
Answer:
Nice
Explanation:
Why should you never do an exercise such as the bench press without a spotter?
Answer:
you could hurt yourself
Explanation:
Answer
You should never do an exercise such as the bench press without a spotter because you could hurt yourself or push your self too much.
Explanation:
PLEASE HELP ME ASAP!!!!!
Answer the question below. Use the rubric in the materials for help if needed.
After the American Revolution, why did many citizens, including the Anti-Federalists, argue that it was necessary to add a bill of rights to the U.S. Constitution? Use details to
support your answer.
Answer:
Federalists argued that the Constitution did not need a bill of rights, because the people and the states kept any powers not given to the federal government. Anti-Federalists held that a bill of rights was necessary to safeguard individual liberty.
Explanation:
i need one more brainliest
How would changing the mass of a bat affect a player’s ability to swing the bat and adjust the path of the bat to hit a moving baseball or softball?
Answer:
Explanation:
The answer to that question is "both," though past players tend to have used heavier bats than do today's players. Baseball's "king of swat" Babe Ruth reportedly began his hitting career using a 54 ounce (1.5 kg) hickory bat, and is known to have used a 40oz bat in 1927 when he hit his 60 home runs.[1] Ty Cobb and Joe Di Maggio both played with 42oz bats and Rogers Hornsby used a 50oz piece of lumber. George Sisler, playing for the St. Louis Browns in the 1920's, made his bat heavier by hammering Victrola needles into the barrel of his bat.[2] In the 1950's Cincinnati Reds' Ted Kluszeski hammered tenpenny nails into his bat to make it heavier.
Other great hitters including Ted Williams, Rod Carew and Stan Musial used much lighter bats: 31-33oz.[1] Roger Maris used a 33oz bat to hit his 61 home runs in 1961. Many players have tried to make their bats lighter by drilling a hole in the barrel and filling it with cork. Detroit Tigers' Norm Cash admitted to using a corked bat in 1961 when he won the batting title with a .361 average (though he slumped to .243 the next year with the same corked bat).[2]
Kirkpatrick[3] reports that Roger Maris participated in a 1962 experiment in which he batted for distance with 5 different new bats whose weights varied from 33 to 47oz. He hit 5 long fly balls with each bat and the distances were measured and correlated to bat weight. The heavier bats, on average, resulted in further distance. However, Maris' preferred bat (which he used to break Babe Ruth's home run record) was the lightest of the set, even though it produced the shortest distance fly balls. Mark McGwire used a 35oz bat to hit his 70 home runs in 1998, and Barry Bonds used a 32oz bat to hit his 73 home runs in 2001. Most of today's major league players typically use 31-35oz bats.
Physicists have shown,[3,4] from a simple collision analysis, that the optimum bat weight is between 15 and 18oz. However, no professional batter uses a bat this light (in fact, you cannot make a wood bat this light). NCAA regulations[x] recently imposed a -3 rule (length in inches minus weigh in ounces cannot exceed 3) so that 34 inch bats must weigh 31oz. So far no such rule exists for Little League play, and -12 composite bats were introduced for the 2003 season. This brings us back to our original questions: which is better: heavier or lighter bats? So, what is the optimum bat weight, and what criteria influence this choice? Let's start by looking at the collision between ball and bat.
For his science project, Austin wants to determine if the pH of standing rainwater changes over time. He collects rainwater and distributes it evenly in 5 jars and places them all indoors in a spot that does not receive a lot of sunlight to limit evaporation. Using a pH testing kit, he measures the pH of the water in the first jar on the 4th day, second jar on the 8th day, third jar on the 12th day, fourth jar on the 16th day and fifth jar on the 20th day. What is the independent, or manipulated, variable in Austin's experiment?
Answer:
This question lacks options, the options are:
A. the number of days the rainwater was allowed to sit
B. the number of times the rainwater was observed
C. the change in the amount of rainwater due to evaporation
D. the change in pH of the rainwater over time
The answer is A
Explanation:
In an experiment, the independent variable is the variable that is changed or manipulated by the experimenter in order to effect a measurable response.
In this experiment, Austin is trying to determine how time changes the pH of standing rainwater. He collects rainwater and distributes it evenly in 5 jars, which he measured the pH at different days using a pH testing kit. Hence, the independent or manipulated variable is THE NUMBER OF DAYS THE RAINWATER WAS ALLOWED TO SIT before measuring their pH.
a resistance of 60ohms allows 0.4 amps of current to flow when it is connected across a battery. what is the voltage of the battery?
Answer:
V = 24 [V]
Explanation:
To solve this problem we must use ohm's law, which tells us that the voltage is equal to the product of resistance by the current.
V = I*R
where:
V = voltage [V]
I = current [amp]
R = resistance [ohm]
Therefore:
V = 0.4*60
V = 24 [V]
which one of the following is a derived SI unit?
A.newton B.meter C.mole d.Kilogram
Answer:
Meter
Explanation:
I'd say meters, cause it's the SI unit of length,
which is a Derived Quantity.
What is the mass of a car if 4500N of force is used to accelerate it at a rate of 3.0m/s?
Answer:
The answer is 15,000 kgExplanation:
The mass of the car can be found by using the formula
[tex]m = \frac{f}{a} \\ [/tex]
f is the force
a is the acceleration
From the question we have
[tex]m = \frac{45000}{3} \\ [/tex]
We have the final answer as
15,000 kgHope this helps you
difference between fundamental unit and derived unit
Answer:
Fundamental units are the units of the fundamental physical quantities in SI system. They are not formed from other units. There are a total of seven fundamental units such as meter, kilogram, ampere, and second. Derived units are those units that are used for derived quantities.
In a certain semiconducting material the charge carriers each have a charge of 1.6 x 10-19
C. How many are entering the semiconductor per second when the current is 2.0 nA?
Answer:
1124923453 electrons
Explanation:
The formula for charge in coulomb ,C =Current in amperes, A * Time in seconds, s
Given in question ;
Charge = 1.6 * 10⁻¹⁹ C
Current = 2.0 nA = 2*e⁻⁹ A
Calculate time in seconds as
1.6 * 10⁻¹⁹ = 2*e⁻⁹ * t
1.6 * 10⁻¹⁹ /2*e⁻⁹ = t
6.48e⁻¹⁶ s = t
So using t=6.48e⁻¹⁶ s and current =2*e⁻⁹ A , the charge will be;
C = 2*e⁻⁹ * 6.48e⁻¹⁶ =1.799e⁻¹⁰ C
But 1 coulomb = 6.25 x 10¹⁸ electrons
so 1.799e⁻¹⁰ C = ?,,,,{ 6.25 x 10¹⁸} *{1.799e⁻¹⁰} = 1124923453.06 electrons
To get employees to work longer hours, employers often offer __________ in the form of extra pay.
A.
costs
B.
benefits
C.
incentives
D.
consequences
Answer:
C
Explanation:
I took the test
The cleavage furrow is formed during the telophase.
Α. True
B. False