Answer:
A. In a polar molecule, the bond is polar covalent. That is, the electrons are shared but are slightly more attracted to the more electronegative atom. That part of the molecule has a negative partial charge density, and the other has a positive partial charge density (there is no symmetry in the distribution of the electricity density)
B. Charges are not affected, the molecule is neutral because electrons are shared. A molecule has the same number of electrons and protons which balance the charges in a molecule. Since all atoms are electrically neutral, then when they combine the form of a neutral molecule.
Explanation:
To determine polarity, the geometry of the molecule must be taken into account to determine the distribution of atoms and their electronegativity (tendency to attract electrons) to determine to which points of the molecule the electrons will be most attracted.
Atoms can share electrons to form chemical bonds and thus form different compounds. In the case of non-polar molecules, when formed in a covalent bond (two atoms bond by sharing valence electrons reaching "stable octet") between equal atoms, the molecule is neutral since it has zero electric charge. In this type of bond there is no change in the oxidation number of the atoms because their shared electrons are equidistant. Covalent bonds in which the electrons are shared equally are called non-polar covalent bonds. This is because the atoms are just the same, they have the same electronegativity, so they "attract" the electrons with the same force and the electrons surround the atoms equally. The charge density distribution is the same for both, there is asymmetry in the distribution of it.
Polar molecules are formed when bonds are formed by different atoms with large differences in electronegativity. The molecule is electrically neutral as a whole because it has an equal number of positive and negative particles, but there is no symmetry in the distribution of the electricity density. A polar bond is one in which a pair of electrons is more attracted to one of the atoms. This causes one end of the molecule to acquire a positive partial charge density and the other end of the molecule to acquire a positive partial charge density and the other end of the molecule to acquire a negative partial charge.
So, as a summary:
A. In a polar molecule, the bond is polar covalent. That is, the electrons are shared but are slightly more attracted to the more electronegative atom. That part of the molecule has a negative partial charge density, and the other has a positive partial charge density (there is no symmetry in the distribution of the electricity density)
B. Charges are not affected, the molecule is neutral because electrons are shared. A molecule has the same number of electrons and protons which balance the charges in a molecule. Since all atoms are electrically neutral, then when they combine the form of a neutral molecule. Only ions do not have a neutral electrical charge because of the process of gaining or losing electrons. An ion with a positive electrical charge is called a cation, and an ion with a negative electrical charge is called an anion.
how to synthesize tripropylamine from propylene
The reactions that result in the emission of light involve the ruthenium label and tripropylamine (TPA), two electrochemically active molecules.
Thus, The electrode surface inside the measurement cell is where the reactions take place.
The ruthenium label is oxidized at the electrode surface as an electrical potential is applied, and TPA is oxidized into a radical cation that spontaneously loses a proton.
When the resultant TPA radical interacts with oxidized ruthenium, the ruthenium label enters an excited state and emits a photon (620 nm) before decaying. The ruthenium label is renewed and ready to carry out numerous light-generating cycles as it goes back to its ground state.
Thus, The reactions that result in the emission of light involve the ruthenium label and tripropylamine (TPA), two electrochemically active molecules.
Learn more about tripropylamine, refer to the link:
https://brainly.com/question/32070784?
#SPJ1
if two magnets are placed on a table, which statement describes a situation with the most attraction between the two magnets
The north pole of one magnet is near the South pole of the other magnet.
The ends of a magnet are called its poles. One end is called the north pole, the other is called the south pole. If you line up two magnets so that the south pole of one faces the north pole of the other, the magnets will pull toward each other.
If you heat 400.0 grams of water in a pot on the stove from 20ºC to 99°C, how much heat did the water absorb?
The amount of heat absorbed by 400 grams of water from 20°C to 99°C is 132,214.4 J.
How to calculate heat?The amount of heat absorbed or released by a substance can be calculated using the following equation;
Q = mc∆T
Where;
Q = quantity of heat absorbed or releasedm = mass c = specific heat capacity∆T = change in temperatureAccording to this question, 400.0 grams of water is heated in a pot on the stove from 20ºC to 99°C. The amount of heat absorbed can be calculated as follows:
Q = 400 × 4.184 × {99 - 20}
Q = 132,214.4 J
Learn more about heat at: https://brainly.com/question/26322639
#SPJ1
Estimate the pH and Fraction (in terms of percentage) CH3COOH molecules deprotonated in 0.15 M CH3COOH
The pH of the 0.15 M [tex]CH_3COOH[/tex] solution is approximately 2.38. and around 2.9% of the [tex]CH_3COOH[/tex] molecules in the 0.15 M solution are deprotonated.
Acetic acid ([tex]CH_3COOH[/tex]) is a weak acid that only partially dissociates in water to form [tex]H^+[/tex] ions and [tex]CH_3COO^-[/tex] ions. To estimate the pH and fraction of [tex]CH_3COOH[/tex]molecules deprotonated in a 0.15 M [tex]CH_3COOH[/tex]solution, we can use the following equations and approximations:
The dissociation constant for acetic acid (Ka) is 1.8 x 10^-5.
The initial concentration of [tex]CH_3COOH[/tex] is equal to its concentration at equilibrium, since it only partially dissociates.
The concentration of [tex]H^+[/tex] ions is equal to the concentration of [tex]CH_3COO^-[/tex] ions at equilibrium, since the dissociation reaction involves a 1:1 ratio of [tex]H^+[/tex] ions to [tex]CH_3COO^-[/tex] ions.
Using these approximations, we can set up an equilibrium expression for the dissociation of [tex]CH_3COOH[/tex] :
[tex]Ka = [H^+][CH_3COO^-]/[CH_3COOH][/tex]
We also know that the initial concentration of [tex]CH_3COOH[/tex] is 0.15 M. Let x be the concentration of [tex]H^+[/tex] ions and [tex]CH_3COO^-[/tex] ions at equilibrium. Then:
[[tex]H^+[/tex]] = x
[[tex]CH_3COO^-[/tex]] = x
[[tex]CH_3COOH[/tex]] = 0.15 - x
Substituting these values into the equilibrium expression and solving for x, we get:
Ka = x^2 / (0.15 - x)
1.8 x 10^-5 = x^2 / (0.15 - x)
x = 0.0042 M
The pH can be calculated using the formula:
pH = -log[[tex]H^+[/tex]]
pH = -log(0.0042)
pH = 2.38
Therefore, the pH of the 0.15 M [tex]CH_3COOH[/tex] solution is approximately 2.38.
To estimate the fraction of [tex]CH_3COOH[/tex] molecules that are deprotonated, we can use the equation:
Fraction deprotonated = [tex][CH_3COO^-] / [CH_3COOH][/tex] x 100%
At equilibrium, the concentration of [tex]CH_3COO^-[/tex] ions is equal to the concentration of [tex]H^+[/tex] ions, which we calculated to be 0.0042 M. The concentration of [tex]CH_3COOH[/tex] at equilibrium is 0.15 - 0.0042 = 0.1458 M. Substituting these values into the equation, we get:
Fraction deprotonated = 0.0042 / 0.1458 x 100%
Fraction deprotonated = 2.9%
For more question on pH click on
https://brainly.com/question/172153
#SPJ11
What is the change in temperature (AT) when a 25 g block of aluminum absorbs 10,000 J of heat?
The change in temperature (ΔT) when a 25 g block of aluminum absorbs 10,000 J of heat is approximately 44.32°C.
To calculate the change in temperature (T) that occurs when an aluminium block absorbs a certain quantity of heat, we must utilise the specific heat capacity of aluminium (c) and the equation:
Q = mcΔT
Where Q is the heat absorbed or released, m is the substance's mass, c is the substance's specific heat capacity, and T is the temperature change.
The specific heat capacity of aluminium is approximately 0.897 J/g°C.
Given that the aluminium block weighs 25 g and absorbs 10,000 J of heat, we can plug the following values into the equation:
(25 g) * (0.897 J/g°C) * T = 10,000 J
We can now solve for T:
T = 10,000 joules / [(25 g) * (0.897 J/g°C)]
ΔT ≈ 44.32°C
for more questions on temperature
https://brainly.com/question/4735135
#SPJ11
Gaseous butane (CH₂(CH₂)₂CH₂) will react with gaseous oxygen (O₂) to produce gaseous carbon dioxide (CO₂) and gaseous water (H₂O). Suppose 48. g of butane is mixed with 54.6 g of oxygen. Calculate the maximum mass of carbon dioxide that could be produced by the chemical reaction. Be sure your answer has the correct number of significant digits.
The maximum mass of carbon dioxide that could be produced by the chemical reaction is 46.2 g
How do i determine the mass of of carbon dioxide produced?First, we shall determine the limiting reactant. This obtained as follow
2CH₃(CH₂)₂CH₃ + 13O₂ -> 8CO₂ + 10H₂O
Molar mass of CH₃(CH₂)₂CH₃ = 58 g/molMass of CH₃(CH₂)₂CH₃ from the balanced equation = 2 × 58 = 116 g Molar mass of O₂ = 32 g/molMass of O₂ from the balanced equation = 13 × 32 = 416 gFrom the balanced equation above,
116 g of CH₃(CH₂)₂CH₃ reacted with 416 g of O₂
Therefore,
48 g of CH₃(CH₂)₂CH₃ will react with = (48 × 416) / 116 = 172.14 g of O₂
From the above calculation, we can see that a higher amount (i.e 172.14 g) of O₂ than what was given (i.e 54.6 g) is needed to react with 48 g of CH₃(CH₂)₂CH₃
Thus, the limiting reactant is O₂
Finally, we shall determine maximum mass of carbon dioxide, CO₂ produced. Details below:
2CH₃(CH₂)₂CH₃ + 13O₂ -> 8CO₂ + 10H₂O
Molar mass of O₂ = 32 g/molMass of O₂ from the balanced equation = 13 × 32 = 416 gMolar mass of CO₂ = 44 g/molMass of CO₂ from the balanced equation = 8 × 44 = 352 gFrom the balanced equation above,
416 g of O₂ reacted to produce 352 g of CO₂
Therefore,
54.6 g of O₂ will react to produce = (54.6 × 352) / 416 = 46.2 g of CO₂
Thus, the maximum mass of carbon dioxide, CO₂ produced is 46.2 g
Learn more about mass produced:
https://brainly.com/question/9526265
#SPJ1
What is the density of an unknown compound in g/ml if 1.28 pounds of the compound has a volume of 4.50L
If evaporation causes surface water to be salty, where would you expect ocean water to be very
dense?
One would expect to find the densest ocean water at the bottom of the ocean, where the water is coldest and under the greatest pressure.
Ocean water is densest at the bottom, where it is coldest and under the greatest pressure. The salt content of seawater does affect its density, but it is not the primary factor. The density of seawater is determined by its temperature and salinity.
As seawater evaporates, the concentration of salt increases, but the volume of water decreases, leading to an increase in density. However, this effect is relatively small compared to the influence of temperature. Colder water is denser than warmer water, which means that the deep ocean is much denser than the surface.
Therefore, The density of seawater at the bottom of the ocean can reach up to 1,040 kilograms per cubic meter, which is almost 5% denser than surface seawater.
For more such questions on ocean
https://brainly.com/question/31034213
#SPJ11
Suppose you were doing a titration where you start out with a basic solution of around 8.0 and you expect to keep adding an acid until the mixture has a pH of 3.0. Based on the indicator chart which pH indicator would be the best one to use. Describe the color change that would be observed
Based on the information regarding the titration, as the pH of the solution decreases, phenolphthalein will change color to pink.
How to explain the color changeThe best indicator to use for a titration where you start out with a basic solution of around 8.0 and you expect to keep adding an acid until the mixture has a pH of 3.0 is phenolphthalein.
Phenolphthalein is an indicator that changes color in the pH range of 8.3 to 10.0. In basic solutions, phenolphthalein is colorless. As the pH of the solution decreases, phenolphthalein will change color to pink. The color change will be observed at the equivalence point of the titration, which is the point at which the amount of acid added is equal to the amount of base present. At the equivalence point, the pH of the solution will be 7.0.
Learn more about titration on
https://brainly.com/question/186765
#SPJ1
B. Answer the question.
How is living in space different from living on Earth?
Answer:
The three major differences are: atmosphere (vacuum in space), radiation (high level of dangerous particles), and gravity (weightlessness in space). The first difference between the Earth and space is the atmosphere.Jan
The only significant differences from living on Earth are that they operate in the confined space of the Space Shuttle orbiter cabin and that they, and all objects inside the cabin, float.
Explanation:
mark branliest
25g of NH3 is mixed with 4 mole of O2 is the given reaction
a.which is the limiting reaction
b.what mass of no is formed
c.what mass of h2o is formed
An ideal gas (which is is a hypothetical gas that conforms to the laws governing gas behavior) confined to a container with a massless piston at the top. (Figure 2) A massless wire is attached to the piston. When an external pressure of 2.00 atm
is applied to the wire, the gas compresses from 4.40 to 2.20 L. When the external pressure is increased to 2.50 atm , the gas further compresses from 2.20 to 1.76 L .
In a separate experiment with the same initial conditions, a pressure of 2.50 atm
was applied to the ideal gas, decreasing its volume from 4.40 to 1.76 L
in one step.
If the final temperature was the same for both processes, what is the difference between q for the two-step process and q for the one-step process in joules?
The difference between q for the two-step process and q for the one-step process is 220.38 joules.
To solve this problem, we use the first law of thermodynamics, which states that change in internal energy (ΔU) of system will be equal to the heat (q) added or removed from the system, minus the work (w) done by or on the system;
[tex]Δ_{U}[/tex] = q - w
For an ideal gas, the internal energy depends only on the temperature, so [tex]Δ_{U}[/tex] is zero if the final temperature is the same for both processes. Therefore, we can set [tex]Δ_{U}[/tex] to zero and solve for the difference in heat (q) between the two processes;
q(two-step) - q(one-step) = w(two-step) - w(one-step)
The work done by or on the gas can be calculated using the equation;
w = -P[tex]Δ_{V}[/tex]
where P is the external pressure, and [tex]Δ_{U}[/tex] is the change in volume. The negative sign indicates that work is done on the gas when it is compressed ([tex]Δ_{U}[/tex] < 0), and work is done by the gas when it expands ([tex]Δ_{U}[/tex] > 0).
For the two-step process, we can calculate the work done in two stages;
w(two-step) = -2.00 atm × (4.40 L - 2.20 L) - 2.50 atm × (2.20 L - 1.76 L)
= -3.32 atm L - 0.605 atm L
= -3.925 atm L
For the one-step process, we can calculate the work done in one step;
w(one-step) = -2.50 atm × (4.40 L - 1.76 L)
= -6.10 atm L
Substituting these values into the equation for the difference in heat, we get;
q(two-step) - q(one-step) = -3.925 atm L - (-6.10 atm L)
= 2.175 atm L
To convert this to joules, we need to multiply by the conversion factor for atm L to joules;
1 atm L = 101.3 J
Therefore; q(two-step) - q(one-step) = 2.175 atm L × 101.3 J/atm L
= 220.38 J
Therefore, the difference in heat between the two processes is 220.38 joules.
To know more about first law of thermodynamics here
https://brainly.com/question/3808473
#SPJ1
Why does it conduct more before and after this minimum point? Explain how and why the ion concentrations change.
After the minimum point, the conductance typically increases again as the concentration of ions in the solution increases.
Without additional context, it is difficult to determine what exactly is being referred to by "this minimum point." However, in general, the conductance of an electrolyte solution depends on the concentration of ions in the solution. Before the minimum point, the conductance typically increases as the concentration of ions in the solution increases. This is because more ions are available to carry the electric current through the solution, leading to a higher conductance. At the minimum point, the conductance reaches a minimum value due to a balance between the effect of ion concentration and the effect of ion mobility. At this point, the concentration of ions in the solution is not high enough to support a high conductance, while the mobility of the ions is not low enough to reduce the conductance significantly. The ion concentration rises to a level where it can support a larger conductance than at the minimum point, which causes this increase in conductance to occur. The addition or removal of a solute, the reaction between various species in the solution, or any number of other events can cause the concentration of ions in the solution to change throughout the process of changing ion concentrations. The amount of accessible ions in the solution is affected by the change in concentration, and this in turn influences the conductance of the solution. In conclusion, the concentration of ions in an electrolyte solution affects the conductance of the solution. The conductance rises with increasing ion concentration, falls to a minimal value at a specific point, and then rises once more with increasing ion concentration continues to increase. The ion concentration in the solution can change due to various factors, which can affect the conductance of the solution.
For more such questions on conductance
https://brainly.com/question/29419715
#SPJ11
The Ksp for LaF3 is 2 x 10^-19. What is the solubility of LaF3 in water in moles per liter?
The solubility of[tex]LaF_3[/tex] in water is 3.04 x 10^-6 mol/L.
The solubility of [tex]LaF_3[/tex] in water can be determined using the Ksp expression:
[tex]Ksp = [La^{3+}][F^-]^3[/tex]
Where [tex][La^{3+}][/tex]and [tex][F^-][/tex] are the molar concentrations of the [tex]La^{3+}[/tex] and [tex]F^-[/tex] ions in the solution.
Since each [tex]LaF_3[/tex] formula unit dissociates into one [tex]La^{3+}[/tex] ion and three [tex]F^-[/tex] ions, the molar solubility of [tex]LaF_3[/tex] can be represented as x. Thus, the molar concentrations of [tex]La^{3+}[/tex] and [tex]F^-[/tex] ions in the solution can be written as x and 3x, respectively.
Substituting these values into the Ksp expression gives:
Ksp = x*(3x)^3 = 27x^4
Now, we can solve for x:
x = (Ksp/27)^(1/4)
= (2 x 10^-19 / 27)^(1/4)
= 3.04 x 10^-6 mol/L
For more question on solubility click on
https://brainly.com/question/24057916
#SPJ11
The total pressure of gas collected over water is 770.0 mmHg and the temperature is 23.0 degrees Celsius what is the pressure of hydrogen gas formed in mmHg?
help plssss!!!! i need this done by tonight!!!!
1. Using your knowledge of the Brønsted-Lowry theory of acids and bases, complete the following acid-base reactions and indicate each conjugate acid-base pair.
i. OH + HPO₂ → H₂O + H₂PO₄²⁻
The conjugate acid-base pair is OH/H₂O, HPO₂²⁻/H₂PO₄²⁻
2) Identify the conjugate acid-base pairs in the following reactions. Write A, B, CA, and CB below the appropriate substance.
i. HCO₃⁻ + NH₃ → NH₄⁺ + CO₃²⁻
The conjugate acid-base pair is HCO₃⁻/CO₃²⁻, NH₃/NH₄⁺
ii. HCI + H₂O → H₃O⁺ + Cl⁻
The conjugate acid-base pair is H₂O/OH⁻, HCI/Cl⁻, H₃O⁺/H₂O, Cl⁻/HCI
iii. CH₃COOH + H₂O → H₃O⁺ + CH₃COO⁻
The conjugate acid-base pair is CH₃COOH/CH₃COO⁻, H₂O/OH⁻, H₃O⁺/H₂O
iv. HOCI + NH₃ → NH₄⁺ + ClO⁻
The conjugate acid-base pair is HOCI/ClO⁻, NH₃/NH₄⁺
3. Write the formula for conjugate bases formed by the following acids.
i. HPO₄²⁻ → PO₄³⁻
ii. H₂O → OH⁻
iii. CN⁻ → HCN
iv. HOOC-COO⁻ → HOOCCOOH
4) Write the formula for conjugate acids formed by each of the following bases.
i. H₃O⁺ → H₂O
ii. HCN → H₂CN⁺
iii. NH₃ → NH₄⁺
5. Classify each of the following pH values as acidic, basic, or neutral.
10 - neutral1.5 - acidic7 - neutral7.5 - basic13 - basic1 - acidicLearn more about Conjugate base pairs here:
https://brainly.com/question/13336099
#SPJ1
The axis of symmetry of a parabola is x = -2. It crosses the x axis at (-5,0). What is the coordinate of the other x-intercept?
The coordinate of the other x-intercept of a parabola with axis of symmetry x = -2 and crossing the x-axis at (-5,0) is (-1,0).
We know the vertex of the parabola in the example above is at the location (-2, y), where y is an integer. This is because the vertical line that passes through the vertex of a parabola is its axis of symmetry.
Since the parabola intersects the x-axis at (-5,0), we can infer that this location is a parabola's root. Given that the parabola is symmetric, a second root that is located at the same distance from the axis of symmetry must also exist.
The other root must be 3 units to the right of the axis of symmetry because the distance between the axis of symmetry and (-5,0) is 3 units to the left. The opposite x-intercept is therefore at (1, 0) or (-2 + 3, 0).
To know more about parabola, visit,
https://brainly.com/question/64712
#SPJ1
Part C
Close the simulation window for carbon dioxide and return to the Cool Molecules Explore page.
Next, click C and H in the periodic table and repeat the process for methane (CH₂). In the table below, record the names of its vibrational modes
and describe the vibration of the molecule in each mode. Also record the number of unique possible states for each mode.
Vibration Mode
Al stretch
E bend
T2 stretch
T2 bend
Number of States in the:
Mode
Description:
The vibrational modes and unique possible states for each mode are detailed in the table below.
What is the vibrational mode of a molecule?A vibrational mode of a molecule refers to a specific way in which the atoms inside a molecule can move relative to each other. Molecules are made up of atoms that are connected to each other by chemical bonds, and these bonds act like springs that can vibrate.
When a molecule absorbs energy, it can cause the bonds to stretch, bend, or twist in specific ways, creating different vibrational modes. The vibrational modes of a molecule can provide important information about its structure and chemical properties.
Find out more on vibrational modes here: https://brainly.com/question/30936396
#SPJ1
I need help right know please
The total volume of HCl(aq) used in the titration was 9.50 mL, the total volume of NaOH(aq) used was 3.80 mL, and the molarity of the sodium hydroxide solution was 0.25 M.
To determine the total volume of HCl(aq) used in the titration, we subtract the initial buret reading from the final buret reading:
Total volume of HCl(aq) = final buret reading - initial buret reading
Total volume of HCl(aq) = 25.00 mL - 15.50 mL
Total volume of HCl(aq) = 9.50 mL
To determine the total volume of NaOH(aq) used in the titration, we use the same approach:
Total volume of NaOH(aq) = final buret reading - initial buret reading
Total volume of NaOH(aq) = 8.80 mL - 5.00 mL
Total volume of NaOH(aq) = 3.80 mL
To calculate the molarity of the sodium hydroxide solution, we use the following formula:
Molarity of NaOH(aq) = (Molarity of HCl(aq) * Volume of HCl(aq)) / Volume of NaOH(aq)
Substituting the given values, we get:
Molarity of NaOH(aq) = (0.10 M * 9.50 mL) / 3.80 mL
Molarity of NaOH(aq) = 0.25 M
Therefore, the molarity of the sodium hydroxide solution is 0.25 M.
Learn more about Titration here:
https://brainly.com/question/13307013
#SPJ1
2H+O2 → 2H₂O
Three grams of hydrogen and 24 grams of oxygen were completely reacted to form
water. Which of the following is the amount of water produced?
27 grams of water are produced from the given amounts of hydrogen and oxygen.
To determine the amount of water produced from the reaction between hydrogen and oxygen, we need to compare the amounts of reactants (hydrogen and oxygen) to the stoichiometry of the balanced chemical equation.
The balanced equation is:
2H₂ + O₂ → 2H₂O
The molar mass of hydrogen (H₂) is 2 g/mol, and the molar mass of oxygen (O₂) is 32 g/mol.
Given:
Mass of hydrogen = 3 grams
Mass of oxygen = 24 grams
We can calculate the number of moles of each reactant by dividing their respective masses by their molar masses:
Number of moles of hydrogen = 3 grams / 2 g/mol = 1.5 moles
Number of moles of oxygen = 24 grams / 32 g/mol = 0.75 moles
According to the balanced equation, the ratio of hydrogen to water is 2:2, and the ratio of oxygen to water is 1:2. Therefore, the limiting reactant in this reaction is oxygen, as it is consumed in a smaller quantity compared to the stoichiometry of the reaction.
From the reaction, we can see that 1 mole of oxygen produces 2 moles of water. Thus, the number of moles of water produced is twice the number of moles of oxygen:
Number of moles of water = 2 * 0.75 moles = 1.5 moles
To determine the amount of water produced in grams, we multiply the number of moles by the molar mass of water (H₂O), which is approximately 18 g/mol:
Mass of water produced = 1.5 moles * 18 g/mol = 27 grams
for more such questions on water
https://brainly.com/question/19491767
#SPJ11
how to get N-methyl-4-(p-tolyldiazenyl)aniline from benzene and toluene
The synthesis of N-methyl-4-(p-tolyldiazenyl)aniline can be accomplished in a few steps, as outlined below:
Step 1: Nitration of toluene
Step 2: Reduction of p-nitrotoluene
Step 3: Diazotization of p-toluidine
Step 4: Coupling with N-methylaniline
Toluene is first nitrated to form p-nitrotoluene. This can be done by treating toluene with a mixture of nitric acid and sulfuric acid under controlled conditions. The reaction can be represented as follows:
Toluene + HNO3 → p-nitrotoluene + H2O
The p-nitrotoluene is then reduced to form p-toluidine, using a reducing agent such as iron and hydrochloric acid. The reaction can be represented as follows:
p-nitrotoluene + 6HCl + Fe → p-toluidine + 3H2O + FeCl3
The p-toluidine is then diazotized using nitrous acid to form the diazonium salt. The reaction can be represented as follows:
p-toluidine + HNO2 → p-tolyldiazonium chloride + H2O
The diazonium salt is then coupled with N-methylaniline to form N-methyl-4-(p-tolyldiazenyl)aniline. The reaction can be represented as follows:
p-tolyldiazonium chloride + N-methylaniline → N-methyl-4-(p-tolyldiazenyl)aniline + HCl
Overall reaction:
Toluene + HNO3 → p-nitrotoluene + H2O
p-nitrotoluene + 6HCl + Fe → p-toluidine + 3H2O + FeCl3
p-toluidine + HNO2 → p-tolyldiazonium chloride + H2O
p-tolyldiazonium chloride + N-methylaniline → N-methyl-4-(p-tolyldiazenyl)aniline + HCl
It is important to note that these reactions require careful handling and should only be attempted by individuals with proper training and experience in organic chemistry.
For more question on synthesis click on
https://brainly.com/question/30332351
#SPJ11
SOMEONE PLEASEHELP!!!!!!! Using the graph to the right, answer the following questions:
1. What is the half-life of the radioactive isotope?
2. If someone had 4,000g of the sample remaining, how many half-lives has the sample gone through?
3. How many days would it take to have only 1,000g of the sample remaining?
^^^^show work!!!!!
The half-life of the radioactive isotope is 8 days.
Mass at 8 days = 8000 g
Number of half-lives in 4000 g = 8000 / 4000 = 2 half life
Time needed for 1000g to remain is 32 days.
The half life of a chemical reaction is the time required by the substance to reach half of its concentration. It is a characteristic property of the unstable atomic nuclei and the way in which they decay.
For a given reaction the half life of a reactant is the time required for its concentration to reach a value that is the arithmetic mean of its initial and final value. For a reactant that is entirely consumed it is the time taken for the reactant concentration to fall to one half of its initial value.
Learn more about Half life, here:
https://brainly.com/question/31666695
#SPJ1
please help me!!!!!! Polonium-290 has a half-life of 57.6 years. If you start with a 10-gram sample of polonium-290, how much will be left after 172.8 years
^^^MUST SHOW WORK
It is significant to remember that the order of a reaction affects how a reaction's half-life is calculated. It is commonly expressed in seconds and is represented by the sign "t 1/2." The amount which is left after 172.8 years is 0.8 g.
The time it takes for the concentration of a particular reactant to reach 50% of its initial concentration, or the time it takes for the reactant concentration to reach half of its initial value, is known as the half-life of a chemical reaction.
To calculate the remaining amount:
N₀ / N = 2ⁿ
n = time / t1/2
172.8 / 57.6 = 3
N = 2ⁿ / N₀
N = 2³ / 10 = 0.8 g
To know more about half-life, visit;
https://brainly.com/question/31821452
#SPJ1
Does anyone know the answer to this question
Answer:
A
Explanation:
If Hydrogen is H₂ There will be two silver
and is Carbon is C There will only be one gray
and if Oxygen is O₃ There will be three red
Attached below! I need help for part B
The heat capacity of a system is defined as the amount of heat required to raise the temperature through 1°C. It is denoted by c. It is an extensive property. The mass of steel bar is 47.93 g.
Here the amount of heat taken by the steel rod is equal to the amount of heat lost by water. The heat required to raise the temperature of the sample of mass 'm' having specific heat 'c' is:
Q = c (T - T₀) m
Cs (Ts - T0s) ms = -Cw (Tw - T0w) mw
ms = - Cw (Tw - T0w) mw / Cs (Ts - T0s)
Mass of water = 110 mL × 1.00 g / mL = 110.00 g
ms = -4.18 J / g°C × (21 .10 - 22.00) 110.00 g / 0.452 J / g°C (21.10 - 2.00) = 47.93 g
To know more about heat capacity, visit;
https://brainly.com/question/29766819
#SPJ1
Whoever wrote that basic answer to my chemistry question that is NOT the complex equation. One of the reactants is [Cu(OH2)6]^2+
so what's the rest of the equation?
Here is the balanced chemical equation for the reaction involving [tex][Cu(OH_2)_6]^{2+}:[/tex]
[tex][Cu(OH_2)_6]^{2+} + 4Cl^- = [CuCl_4]^{2-} + 6H_2O[/tex]
In this reaction, [tex][Cu(OH_2)_6]^{2+}[/tex] is a complex ion of copper(II) that reacts with chloride ions to form the complex ion [tex][CuCl_4]^{2-}[/tex] and water molecules.
The balanced equation indicates that for every one mole of [tex][Cu(OH_2)_6]^{2+[/tex] that reacts, four moles of chloride ions are required and two moles of [tex][CuCl_4]^{2-[/tex] and six moles of water are produced.
A balanced chemical equation is a written representation of a chemical reaction that shows the same number of atoms of each element on both the reactant and product sides of the equation.
In other words, the law of conservation of mass is obeyed in a balanced chemical equation, which states that the total mass of the reactants must equal the total mass of the products.
For more question on balanced chemical equation click on
https://brainly.com/question/11904811
#SPJ11
3: Given 12.3 grams of NH3, how many moles of N₂ were needed?
0.361 moles of N₂ were required to produce 12.3 g of NH₃, using the balanced chemical equation N₂ + 3H₂ → 2NH₃.
The balanced chemical equation for the reaction is N₂ + 3H₂ → 2NH₃. We can use the balanced equation and the molar mass of NH₃ to calculate the number of moles of N₂ required to produce 12.3 g of NH₃,
1 mol NH₃ = 2 mol N₂ (from the balanced equation)
molar mass of NH₃ = 17.03 g/mol
moles of NH₃ = 12.3 g / 17.03 g/mol
moles of NH₃ = 0.722 mol
moles of N₂ = (0.722 mol NH₃) / 2
moles of N₂ = 0.361 mol
Therefore, 0.361 moles of N₂ were needed to produce 12.3 grams of NH₃.
To know more about moles, visit,
https://brainly.com/question/29367909
#SPJ1
Complete question - For the reaction, N₂ + 3H₂ → 2NH₃. Given 12.3 grams of NH3, how many moles of N₂ were needed?
Two samples of carbon come into contact. A heat transfer will occur between sample A and sample B. What must be true
for heat to transfer from sample A to sample B?
The average kinetic energy of A is greater than that of B.
The average kinetic energy of B is greater than that of A.
The average kinetic energy of both samples is equal.
The average kinetic energy does not determine the direction of heat transfer.
Mark this and return
Save and Exit
56:26
Next
Submit
What is the energy associated with the formation of 2.55 g of 4He by the fusion of 3H and 1H?
Substance Mass (u)
4He 4.00260
3H 3.01605
1H 1.00783
The energy associated with the formation of 2.55 g of 4He by the fusion of 3H and 1H is approximately -[tex]2.57 * 10^{-12 }.[/tex] Joules
How do we calculate?The balanced nuclear equation for the fusion of 3H and 1H to form 4He is shown below:
3H + 1H → 4He
We find that the difference in mass between the reactants and products is: (3 × 3.01605 u) + (1 × 1.00783 u) - (1 × 4.00260 u) = -0.01854 u
Einstein's energy equation is E = mc².
E = (-0.01854 u) × (1.66054 × 10^-27 kg/u) × (2.998 × 10^8 m/s)^2
E = [tex]-4.03 * 10^{-12}[/tex] J
The number of reactions = 2.55 g / 4.00260 g/mol = 0.637 mol
The total energy is = [tex]-4.03 * {10^-12} J[/tex]× 0.637 mol
total energy = [tex]2.57 * 10^{-12} J[/tex]
Learn more about Einstein's energy equation at:
https://brainly.com/question/27158464
#SPJ1
AUDITORS' REPORT & PROFESSIONAL BODIES PART B B1. How would anyone know that the published financial statements of Shoprite and Spar LTD reflect the real results for the financial year? B2. As you have studied the audit reports of the two companies, in which company would you buy shares and why? Quote page numbers / paragraphs, etc. to prove your answer or as evidence of research conducted. [24 marks] " B3. Do the auditors give an absolute assurance that everything is accurate and can be relied upon? Respond by quoting a line/statement in the report to substantiate your answer B4. Conduct further research about the Professional bodies indicated in brackets (SAICA, SAIPA and IRBA) and answer the questions that follow: What does SAICA, SAIPA and IRBA stand for? 4.1 4.3 4.2 What are the Roles and Objectives of SAICA, SAIPA AND IRBA? Explain TWO for each one of them. (2) What would be their Specific and General Actions that they would take in case their members are found guilty of unprofessional conduct / misconduct. B5. Give THREE types of Audit evidence that the auditors of SPAR Group Ltd could have used to arrive at their opinion. (3) (2) (3) (6) (5) (3)
SAICA: South African Institute of Chartered Accountants
SAIPA: South African Institute of Professional Accountants
IRBA: Independent Regulatory Board for Auditors
B1. It is challenging for anybody to know whether the distributed budget summaries of Shoprite and Fight LTD mirror the genuine outcomes for the monetary year.
The reviewers' reports give some affirmation that the budget summaries are reasonably introduced, however they don't ensure the exactness or culmination of the data.
The inspectors' perspective depends on their assessment of the fiscal summaries and their evaluation of the bookkeeping approaches and gauges utilized by the organizations. Nonetheless, there is as yet a gamble of material misquote because of misrepresentation or mistake.
B2. In light of the review reports, it is hard to figure out which organization is a superior speculation. The two organizations got unfit suppositions, it are decently introduced to demonstrate that their fiscal reports.
In any case, the review reports truly do feature a few dangers and vulnerabilities that could influence the organizations' monetary exhibition. For instance, Fight's review report makes reference to a gamble connected with the effect of the Coronavirus pandemic on the organization's tasks and monetary outcomes.
Financial backers would have to lead extra examination and investigation to figure out which organization is a superior venture.
B3. No, the examiners don't give an outright affirmation that everything is precise and can be depended upon. In both review reports, the evaluators express that their viewpoint depends on their assessment of the budget summaries and their appraisal of the bookkeeping approaches and gauges utilized by the organizations.
In any case, they likewise note that there is a gamble of material misquote because of extortion or blunder, and that their assessment may not recognize every material error.
B4. SAICA represents the South African Organization of Contracted Bookkeepers, SAIPA represents the South African Foundation of Expert Bookkeepers, and IRBA represents the Autonomous Administrative Board for Examiners. The jobs and targets of these bodies are as per the following:
SAICA:
Jobs and targets:
Controlling the bookkeeping calling in South Africa
Setting moral and expert norms for bookkeepers
Giving instruction, preparing, and improvement for bookkeepers
Advancing the interests of the bookkeeping calling
Explicit and general activities in the event of amateurish direct:
Exploring grumblings of wrongdoing
Restraining individuals who have disregarded moral or expert principles
Suspending or disavowing the enrollment of individuals who are viewed as at legitimate fault for serious unfortunate behavior
SAIPA:
Jobs and targets:
Controlling and supporting the expert bookkeeping calling in South Africa
Setting moral and expert norms for bookkeepers
Giving schooling, preparing, and advancement for bookkeepers
Advancing the interests of the bookkeeping calling
Explicit and general activities in the event of amateurish direct:
Researching protests of unfortunate behavior
Restraining individuals who have disregarded moral or expert principles
Giving direction and backing to individuals who need help to agree with norms.
IRBA:
Jobs and goals:
Managing reviewers and the review calling in South Africa
Setting moral and expert norms for evaluators
Leading quality confirmation surveys of review firms
Advancing public trust in the review calling
Explicit and general activities in the event of amateurish direct:
Exploring grumblings of wrongdoing
Restraining evaluators who have abused moral or expert guidelines
Giving direction and backing to inspectors who need help to agree with principles
B5. Three kinds of review proof that the examiners of Fight Gathering Ltd might have used to show up at their perspective are:
Affirmation of balances: the inspectors might have mentioned affirmations from Fight's clients and providers to confirm the precision of the records receivable and creditor liabilities adjusts.
Perception: the reviewers might have noticed Fight's stock build up to confirm the presence and valuation of stock.
Scientific methodology: the examiners might have carried out logical systems, like pattern examination and proportion investigation, to distinguish any uncommon changes or connections in the monetary information.
To learn more about Audits, refer:
https://brainly.com/question/13769200
#SPJ1