money market mutual funds consist of a mixture of bonds and money market securities.T/F

Answers

Answer 1

True. Money market mutual funds consist of a mixture of bonds and money market securities.

Money market mutual funds are investment vehicles that pool money from investors and invest primarily in short-term, low-risk securities. These funds typically consist of a combination of bonds and money market securities.

Bonds are debt instruments issued by corporations, governments, or municipalities to raise capital. They have a fixed maturity date and pay interest to bondholders. Money market securities, on the other hand, are short-term instruments with high liquidity and low risk. Examples of money market securities include Treasury bills, commercial paper, certificates of deposit (CDs), and repurchase agreements (repos).

Learn more about mutual funds here:

https://brainly.com/question/31240480

#SPJ11


Related Questions

TRUE/FALSE.The higher the node number, the longer the activity will take.

Answers

FALSE. The node number is simply an identification number for each activity in a network diagram and does not indicate the duration or length of the activity. The duration of an activity is determined by its estimated time and resources needed to complete the task.

In general, the statement that the higher the node number, the longer the activity will take is not universally true. The duration of an activity depends on various factors, including its complexity, dependencies on other activities, available resources, and efficiency of execution.Node numbers are typically associated with activities in project management or scheduling diagrams, such as the precedence diagram method (PDM) or the program evaluation and review technique (PERT). In these diagrams, nodes represent specific activities, and the relationships between nodes indicate the dependencies between activities.While it is possible that activities with higher node numbers may take longer in some cases, it is not a direct correlation. The duration of an activity is determined by its inherent characteristics and constraints. For example, an activity with a lower node number may have complex requirements or dependencies, causing it to take longer than an activity with a higher node number that has simpler requirements.

It's important to analyze the specific details of each activity, including its scope, resources, and dependencies, to determine its estimated duration accurately. Simply relying on the node number in a diagram would not provide an accurate measure of the activity's duration

Learn more about node number click here

brainly.in/question/13143698

#SPJ11

When the UH Bookstore orders a large shipment of football jerseys just before the big game, this type of inventory is typically called:
A. Cycle Stock
B. Smoothing Inventory
C. Hedge Inventory
D. Anticipation Inventory
E. Transportation Inventory

Answers

When the UH Bookstore orders a large shipment of football jerseys just before the big game, this type of inventory is typically called d) anticipation inventory.

Anticipation inventory is held in anticipation of future demand and is ordered in advance of peak demand to ensure that the inventory levels are sufficient to meet customer demand. This type of inventory is typically used to reduce the risk of stockouts and to ensure that there is sufficient inventory available during peak demand periods.

Anticipation inventory is commonly used in industries where demand is seasonal or where there are known peaks in demand, such as retail or sports merchandising. By holding anticipation inventory, companies can ensure that they are able to meet customer demand during these peak periods and avoid the costs associated with stockouts or lost sales.

Overall, anticipation inventory plays an important role in supply chain management, as it allows companies to ensure that they are able to meet customer demand during peak periods while minimizing the risk of stockouts and lost sales.

Therefore, the correct answer is D. Anticipation Inventory

Learn more about supply chain management here: https://brainly.com/question/31538507

#SPJ11

guerilla radio broadcasting has a project available with the following cash flows : year cash flow 0 −$ 15,900 1 6,500 2 7,800 3 4,300 4 3,900

Answers

The payback period for Guerilla Radio Broadcasting's project is 3 years. Since the cumulative cash inflows exceed the initial investment at year 3, the payback period is 3 years.

The payback period is a capital budgeting technique that measures the time it takes for the cash inflows of a project to recover its initial investment. To calculate the payback period, we need to determine the number of years it takes for the cumulative cash inflows to equal or exceed the initial investment.

In this case, the initial investment is -$15,900, which represents the cash outflow at year 0. We can calculate the cumulative cash inflows by adding the cash flows for each year, starting from year 1, until we reach or exceed the initial investment.

Year 1: $6,500

Year 2: $6,500 + $7,800 = $14,300

Year 3: $14,300 + $4,300 = $18,600

Since the cumulative cash inflows exceed the initial investment at year 3, the payback period is 3 years. This means that it will take 3 years for the project to recover its initial investment.

In summary, the payback period for Guerilla Radio Broadcasting's project is 3 years.

To know more about payback period refer here:

https://brainly.com/question/28304736#

#SPJ11

Complete Question:

Guerilla Radio Broadcasting has a project available with the following cash flows :

Year - Cash Flow

0 −$15,900

1 - 6,500

2 - 7,800

3 - 4,300

4 - 3,900

What is the payback period?

Maintaining ___________ is generally the most reasonable response to claims made by marketers and advertisers.

Answers

Maintaining skepticism is generally the most reasonable response to claims made by marketers and advertisers.

In today’s market, companies are constantly vying for our attention and trying to convince us to buy their products or services. Unfortunately, many of these claims are exaggerated, misleading, or outright false. As a result, it is important to take every promise made by a company with a grain of salt and to do our own research before making any decisions.

It is also important to be aware of any potential bias that the company may have in trying to sell its product. For example, a company may be willing to make exaggerated promises or ignore any potential risks associated with their product in order to make it more appealing. It is also wise to be aware of any potential conflicts of interest that a company may have when making a claim.

know more about advertisers here

https://brainly.com/question/16257206#

#SPJ11

true or false firms in the same industry will have the same inventory turns.

Answers

False, firms in the same industry may have different inventory turns due to various factors such as differences in production efficiency, sales volume, and supply chain management.

Inventory turns, also known as inventory turnover, is a financial ratio that measures the number of times a company sells and replaces its inventory within a certain period. A high inventory turnover ratio indicates that a company is selling its inventory quickly and efficiently.

In the same industry, two firms may have different inventory turnover ratios due to differences in their production processes. For example, a company that uses a just-in-time inventory system may have a higher inventory turnover ratio than a company that uses a traditional inventory management system.

Supply chain management can also affect inventory turns. For example, a company that has strong relationships with its suppliers and can quickly restock its inventory may have a higher inventory turnover ratio than a company that experiences frequent supply chain disruptions.

Therefore, firms in the same industry may have different inventory turns due to various factors that impact their production efficiency, sales volume, and supply chain management.

To know more aboutfirms refer here

https://brainly.com/question/29482295#

#SPJ11

cullumber company has beginning raw material inventory $10,000, ending raw materials inventory $12,600, and raw material purchases $142,800. what is the cost of direct materials used?

Answers

To determine the cost of direct materials used by Cullumber Company, you need to consider the beginning raw materials inventory, ending raw materials inventory, and raw material purchases.

The beginning raw materials inventory is the stock of materials at the start of the period, which is $10,000. The ending raw materials inventory is the stock of materials at the end of the period, which is $12,600. Raw material purchases made during the period amount to $142,800.

To calculate the cost of direct materials used, you can use the following formula:

Cost of Direct Materials Used = (Beginning Raw Materials Inventory + Raw Material Purchases) - Ending Raw Materials Inventory

Plugging in the given values, the calculation would be:

Cost of Direct Materials Used = ($10,000 + $142,800) - $12,600

Cost of Direct Materials Used = $152,800 - $12,600

Cost of Direct Materials Used = $140,200

Therefore, the cost of direct materials used by Cullumber Company during the period is $140,200.

For more such questions on, direct materials :

https://brainly.com/question/30573180

#SPJ11

To calculate the cost of direct materials used, we need to subtract the ending raw materials inventory from the sum of beginning raw material inventory and raw material purchases.

This is because the materials used in production are the difference between the raw materials available at the start of the period (beginning inventory) plus any additional raw materials purchased during the period and the raw materials left over at the end of the period (ending inventory).Cost of direct materials used = Beginning raw material inventory + Raw material purchases - Ending raw material inventory

Cost of direct materials used = $10,000 + $142,800 - $12,600

Cost of direct materials used = $140,200

Therefore, Cullumber Company's cost of direct materials used is $140,200.

Learn more about purchases here

https://brainly.com/question/29560034

#SPJ11

net neutrality is bad for small businesses. true false

Answers

it is not accurate to categorically state that net neutrality is either bad or good for small businesses.

Some argue that net neutrality is beneficial for small businesses because it promotes a level playing field, allowing them to compete with larger established companies on equal terms. It prevents ISPs from favoring certain websites or services by providing faster or more reliable access, which could give an unfair advantage to big businesses with more resources.

On the other hand, some argue that net neutrality regulations impose additional costs and regulations on ISPs, which could potentially limit their investment and infrastructure development. This, in turn, could impact the quality of internet services available to small businesses.

Ultimately, the impact of net neutrality on small businesses depends on various factors, including the specific industry, market conditions, and the regulatory environment. It is a complex and nuanced issue with different viewpoints. Therefore, it is not accurate to categorically state that net neutrality is either bad or good for small businesses.

To learn more about Net neutrality visit- https://brainly.com/question/13665050

#SPJ11

Ambiguous receipts written in the receipt book were typically made to (A) Tammy Fisher (B) Robin Shoals (C) Doug Laflin
(D) Pator Lori Coleman

Answers

Regarding the question about ambiguous receipts, unfortunately, I cannot provide a definite answer since I do not have any information about the context or the nature It is impossible to determine who the ambiguous receipts were made to without more details.

Ambiguous receipts are transactions that lack clarity or specificity, leaving room for interpretation or confusion. This can happen when a transaction is not recorded properly or when there are discrepancies between what was purchased and what was documented.
Receipt books are commonly used to record sales transactions and serve as proof of payment for both the buyer and seller. They are important for tracking sales, inventory, and revenue, and can be used for accounting and tax purposes.
Regarding the question about ambiguous receipts, unfortunately, I cannot provide a definite answer since I do not have any information about the context or the nature of the transactions. It is impossible to determine who the ambiguous receipts were made to without more details. However, whoever wrote them should have provided more clarity and specificity in the documentation to avoid any confusion or misinterpretation.

To know more about ambiguous receipts visit:

https://brainly.com/question/28274328

#SPJ11

In January 2017, the management of Kinzie Company concludes that it has sufficient cash to permit some short-term investments in debt and stock securities. During the year, the following transactions occurred.



Feb. 1 Purchased 500 shares of Muninger common stock for $25,000.


Mar. 1 Purchased 700 shares of Tatman common stock for $17,500.


Apr. 1 Purchased 40 $1,110, 7% Yoakem bonds for $44,400. Interest is payable semiannually on April 1 and October 1.


July 1 Received a cash dividend of $0. 70 per share on the Muninger common stock.


Aug. 1 Sold 167 shares of Muninger common stock at $60 per share.


Sept. 1 Received a $1 per share cash dividend on the Tatman common stock.


Oct. 1 Received the semiannual interest on the Yoakem bonds.


Oct. 1 Sold the Yoakem bonds for $43,400.



At December 31, the fair value of the Muninger common stock was $56 per share. The fair value of the Tatman common stock was $24 per share. Journalize the transactions and post to the accounts Debt Investments and Stock Investments. (Use T-account. ) (Record journal entries in the order presented in the problem. If no entry is required, select "No entry" for the account titles and enter 0 for the amounts. Round answers to 0 decimal places, e. G. 5,275. )



Required:


a. Prepare the adjusting entry at December 31, 2017, to report the investment securities at fair value.


b. Show the balance sheet presentation of investment securities at December 31, 2017. (Round answer to 0 decimal places, e. G. 5,275. )


c. Give the statement classification of each income statement account.

Answers

a. The adjusting entry at December 31, 2017, to report the investment securities at fair value would be:
Fair Value Adjustment-Debt Investments = $0.
Fair Value Adjustment-Stock Investments = [$56 x 333 shares] + [$24 x 700 shares] – [$25,000 + $17,500] = $8,320.


The account titles and explanation are:
DateAccount Titles and ExplanationDebitCreditDec. 31Fair Value Adjustment-Stock Investments$8,320Stock Investments$8,320 (To record the unrealized gain on Kinzie Company's stock investments at year-end)Dec. 31Fair Value Adjustment-Debt Investments$0Debt Investments$0 (To record the unrealized gain on Kinzie Company's bond investments at year-end)
b. Balance sheet presentation of investment securities at December 31, 2017, is as follows:
Investment Securities:                                                $75,220
Stock investments, at fair value (333 Muninger shares x $56)      $18,648
                                                                           (700 Tatman shares x $24)
Debt investments, at cost (40 Yoakem bonds x $1,110)           $44,400
Less: Fair value adjustment - stock investments                  $8,320
Total investment securities                                           $67,900
c. The statement classification of each income statement account is given below:
Sales Revenue:
On account of the gain on the sale of Muninger common stock, sales revenue of $10,020 [$60 per share x 167 shares] was realized.
Other revenue and gains:
It includes the gain of $8,320 on the fair value adjustment of Kinzie's stock investments.
Cost of goods sold:
It is not applicable to the investment transactions of Kinzie Company.
Operating expenses:
There is no transaction related to operating expenses
Interest expense:
It is not applicable to the investment transactions of Kinzie Company.

To learn more about stock :

https://brainly.com/question/30532251

#SPJ11

Megan received $180 for her birthday and wants to spend this money on movie tickets and computer games. movie tickets cost $10 each. computer games cost $30 eachhange with the level of output quizlet

Answers

She can also choose to buy a combination of both movie tickets and computer games, as long as the total cost does not exceed $180.

Let's determine the number of movie tickets and computer games Megan can buy with her $180 birthday money, using the given costs for each item.

Step 1: Identify the costs of movie tickets and computer games.
- Movie tickets cost $10 each.
- Computer games cost $30 each.

Step 2: Calculate the maximum number of movie tickets and computer games Megan can buy.
- Divide the total amount of money ($180) by the cost of each item to find the maximum quantity.

For movie tickets:
- $180 ÷ $10 = 18 movie tickets.

For computer games:
- $180 ÷ $30 = 6 computer games.

Step 3: Present the answer.
Megan can buy a maximum of 18 movie tickets or 6 computer games with her $180 birthday money.

For more about total cost:

https://brainly.com/question/14927680


#SPJ11

The simple linear regression model is y; = Bo + B1x; + εj. For what does B, stand? Choose the correct answer below. A. It is the y-intercept of the population regression line. B. It is the residual of the ith observation in the population. C. It is the slope of the population regression line. D. It is the observed value of the response variable for the ith observation in the population. E. It is the value of the explanatory variable for the ith observation in the population.

Answers

B stands for the slope of the population regression line. Option C

The simple linear regression model is used to estimate the relationship between two variables - the response variable (y) and the explanatory variable (x). The goal is to determine how changes in the explanatory variable affect the response variable. The regression line is used to represent the relationship between the two variables.

The slope of the regression line (B1) represents the amount by which the response variable (y) changes for a unit increase in the explanatory variable (x).

In other words, it tells us the direction and the magnitude of the relationship between the two variables. If B1 is positive, it means that an increase in x leads to an increase in y, and if B1 is negative, it means that an increase in x leads to a decrease in y.

Therefore, B stands for the slope of the population regression line, and it is a crucial parameter in the simple linear regression model as it represents the relationship between the two variables.

It is essential to estimate the slope accurately to make valid predictions and draw meaningful conclusions about the relationship between the variables. So Option C is correct:

For more questions on population visit:

https://brainly.com/question/27779235

#SPJ11

B1 stands for the slope of the population regression line in the simple linear regression model.

The model can be represented as y = Bo + B1x + ε, where y is the response variable, x is the explanatory variable, Bo is the y-intercept of the regression line, B1 is the slope of the regression line, and ε is the random error term.The slope B1 represents the change in the response variable y for a one-unit increase in the explanatory variable x. It is an important parameter in the regression model and can be estimated using various statistical methods, such as the least squares method.Therefore, the correct answer is C. It is the slope of the population regression line.

Learn more about population here

https://brainly.com/question/29885712

#SPJ11

briefly describe how the use of databases could help in detecting kickback fraud schemes

Answers

Databases can help in detecting kickback fraud schemes by allowing the analysis of large volumes of transactional data.

By identifying patterns of payments or transactions that are inconsistent with typical business practices, such as payments to vendors that are not on an approved list or repeated payments to the same vendor for the same service, auditors can flag potential fraud schemes for further investigation.

Additionally, databases can be used to compare vendor addresses or bank account information to employee information to detect collusion between vendors and employees. The use of data analytics and algorithms can further enhance the detection of irregularities and highlight potential fraudulent activity in kickback schemes.

Learn more about transactional data.

https://brainly.com/question/14588731

#SPJ4

the purpose of _____ is to generate many ideas as the first step of the new product development.

Answers

The purpose of ideation is to generate a large number of ideas as the first step in the new product development process.

Why is it important?

This is an important stage in which teams brainstorm and develop ideas that can potentially become successful products.

The ideation stage encourages creativity, critical thinking and problem-solving, and is typically done in a group setting to generate a wide range of ideas from different perspectives. By generating a diverse set of ideas, companies can evaluate which ones are worth pursuing further.

Through ideation, companies can increase their chances of creating innovative products that meet customer needs and stand out in the marketplace.

Hence, the answer is ideation.

To know more on ideation visit:

https://brainly.com/question/26490878

#SPJ11

Ratios that test liquidity include all of the following EXCEPT:
A) return on assets
B) acid-test ratio
C) inventory turnover
D) current ratio

Answers

Answer: Ratios that test liquidity are financial ratios that measure a company's ability to meet its short-term obligations. These ratios focus on a company's current assets and current liabilities to assess its liquidity position.

Explanation: Out of the options given, return on assets (A) is not a ratio that tests liquidity. Return on assets is a profitability ratio that measures how efficiently a company uses its assets to generate profits.

The acid-test ratio (B) is a ratio that tests liquidity. It is also known as the quick ratio and measures a company's ability to meet its short-term obligations with its most liquid assets, such as cash, marketable securities, and accounts receivable.

The inventory turnover ratio (C) is also not a ratio that tests liquidity. This ratio measures the number of times a company sells and replaces its inventory during a given period.

The current ratio (D) is a ratio that tests liquidity. It is calculated by dividing a company's current assets by its current liabilities. The current ratio measures a company's ability to pay its short-term obligations with its current assets. A current ratio of 1 or higher is considered good, as it indicates that the company has enough current assets to pay off its current liabilities.

The ratios that test liquidity include the acid-test ratio and current ratio, while return on assets and inventory turnover are not liquidity ratios.

https://brainly.com/31993847

explain eight steps that an auditor follows when understanding internal controls at the transaction level and developing an audit strategy

Answers

When an auditor is tasked with understanding internal controls at the transaction level and developing an audit strategy, there are eight key steps they typically follow. These are:

1. Determine the audit objectives: The auditor must understand the purpose of the audit and the specific goals they are trying to achieve.

2. Identify significant accounts and transactions: The auditor needs to identify which accounts and transactions are most important to the financial statements and therefore require the most scrutiny.

3. Understand the control environment: The auditor must analyze the company's internal control environment, including the tone at the top, policies and procedures, and management's oversight.

4. Identify and assess key controls: The auditor needs to identify which controls are most important in preventing or detecting material misstatements and assess their effectiveness.

5. Test controls: The auditor must test the key controls identified in step 4 to ensure they are working as intended.

6. Identify control deficiencies: If any control deficiencies are identified during testing, the auditor needs to determine their impact on the financial statements and report them to management.

7. Develop an audit plan: Based on the results of steps 1-6, the auditor must develop an audit plan that outlines the scope, timing, and nature of the audit procedures to be performed.

8. Communicate results: Finally, the auditor needs to communicate their findings to management, including any control deficiencies identified and recommendations for improvement.

By following these eight steps, the auditor can gain a thorough understanding of the company's internal controls at the transaction level and develop an effective audit strategy that meets the audit objectives and identifies any potential issues that could impact the accuracy of the financial statements.

For more such questions on internal controls

https://brainly.com/question/26398073

#SPJ11

The transaction level and developing an audit strategy.

Identify the relevant control objectives

Understand the control environment

Identify the control activities:

Evaluate the design of the controls

Test the operating effectiveness of the controls

Consider the impact of IT

Determine the extent of reliance on controls

Develop an audit strategy

Identify the relevant control objectives: The first step for an auditor is to understand the objectives of the internal control system relevant to the audit. These objectives can vary depending on the nature of the business and the risks involved. For example, the control objectives for a financial institution may differ from those of a manufacturing company.

Understand the control environment: The auditor needs to gain an understanding of the control environment in which the controls operate. This includes the organization's culture, management style, and internal policies and procedures.

Identify the control activities: The next step is to identify the specific control activities in place to achieve the relevant control objectives. This may include automated controls, manual procedures, or a combination of both.

Evaluate the design of the controls: The auditor needs to evaluate the design of the controls to determine if they are appropriately designed to achieve the control objectives. This involves considering the nature of the transactions and whether the controls are operating effectively.

Test the operating effectiveness of the controls: The auditor needs to test the operating effectiveness of the controls to determine if they are operating as intended. This may involve performing a walkthrough of the control process or testing a sample of transactions.

Consider the impact of IT: The auditor needs to consider the impact of IT on the control environment and the controls in place. This may involve testing automated controls and assessing the reliability of the IT system.

Determine the extent of reliance on controls: Based on the evaluation of the design and operating effectiveness of the controls, the auditor needs to determine the extent of reliance on the controls. This may include identifying areas where the controls are weak or ineffective and developing alternative audit procedures.

Develop an audit strategy: Finally, the auditor needs to develop an audit strategy based on the evaluation of the controls. This may involve modifying the audit approach or developing additional audit procedures to address identified risks or control weaknesses.

Overall, understanding internal controls at the transaction level and developing an audit strategy requires a detailed and systematic approach to ensure that the audit is comprehensive and effective.

Learn more about strategy here:

https://brainly.com/question/28214351

#SPJ11

On October 31, the stockholders' equity section of Crane Company's balance sheet consists of common stock $552,000 and retained 402,000. Crane is considering the following two courses of action:(1) Declaring a 5% stock dividend on the 92,000 $ 6 par value shares outstanding(2) Effecting a 2-for-1 stock split that will reduce par value to $3 per share.

Answers

Both options will have an impact on the equity structure of the company, but neither will increase or decrease the total equity balance.

The stockholders' equity section of a company's balance sheet represents the residual interest of the owners in the assets of the business. In the case of Crane Company, its equity section consists of common stock and retained earnings. The common stock reflects the amount of capital contributed by investors, while retained earnings represent the accumulated profits that the company has kept over time.
Now, the company is considering two courses of action that will impact its equity structure. The first option is to declare a 5% stock dividend on the outstanding shares of $6 par value. This means that shareholders will receive additional shares equivalent to 5% of their current holdings. This move will increase the number of outstanding shares and reduce the earnings per share. However, it will not affect the total equity balance, as it is merely a redistribution of equity among existing shareholders.
The second option is to effect a 2-for-1 stock split that will reduce the par value to $3 per share. This move will double the number of outstanding shares, thereby reducing the price per share. However, it will not affect the total equity balance, as the par value reduction will be offset by the increase in the number of shares.
The decision to declare a stock dividend or effect a stock split will depend on the company's goals and the preferences of its shareholders. Shareholders who prefer a higher dividend yield may opt for the stock dividend, while those who prefer a lower share price may prefer the stock split. However, the company should ensure that any move it makes is aligned with its long-term strategy and does not compromise its financial health.

To know more about equity visit:

https://brainly.com/question/31518525

#SPJ11

Monroe buys a new television for $795. She receives consumer surplus of $355 from the purchase. How much does Monroe value her television

Answers

Monroe values her television at **$1,150**.

Consumer surplus represents the difference between the price that a consumer is willing to pay for a product and the actual price they pay. In this case, Monroe's consumer surplus is $355, which means she values the television more than the price she paid.

To calculate the value Monroe places on the television, we add the consumer surplus to the purchase price. Therefore, the value she assigns to the television is $795 (purchase price) + $355 (consumer surplus) = $1,150.

This indicates that Monroe values her television at $1,150, which reflects the maximum amount she would be willing to pay for it based on her satisfaction and the surplus she gained from the purchase.

learn more about "television ":- https://brainly.com/question/25556823

#SPJ11

the activity index used in preparing a flexible budget should not influence the variable costs that are being budgeted. (True or False)

Answers

False, The activity index used in preparing a flexible budget should influence the variable costs that are being budgeted.

The activity index, which is the measure of the level of activity, affects the variable costs in a flexible budget as they vary with changes in activity. For example, if the activity level increases, the variable costs such as direct materials or direct labor will increase accordingly. Therefore, the activity index is crucial in estimating variable costs in a flexible budget.


As the activity level changes, variable costs are also expected to change proportionately. Therefore, the activity index does influence the variable costs being budgeted in a flexible budget.

To Know more about activity index

https://brainly.com/question/31423370

#SPJ11

What are monopolistic competition and oligopoly? Order the industries based on increasing market power and ability to set prices, starting with the highest.

Answers

However, there are differences between the two.In monopolistic competition, there are many firms selling similar but not identical products. Each firm has some degree of control over the price it charges, but there are low barriers to entry and exit in the market.

This means that new firms can enter the market easily, which keeps prices competitive. Examples of industries with monopolistic competition include restaurants, clothing stores, and hair salons.In contrast, oligopoly is a market structure in which a few firms dominate the market. These firms have significant control over the price of their products because there are high barriers to entry for new firms. Examples of industries with oligopoly include telecommunications, airlines, and automobile manufacturers.

Therefore, the order of industries based on increasing market power and ability to set prices, starting with the highest, would be as follows: 1. Monopolistic competition industries (restaurants, clothing stores, and hair salons)
2. Oligopoly industries (telecommunications, airlines, and automobile manufacturers)
Read more about telecommunications here:https://brainly.com/question/28153246
#SPJ11

if the payroll tax were increased, the empirical evidence suggests that:

Answers

If the payroll tax were increased, the empirical evidence suggests that: secondary earners would change their hours worked more than would primary earners. The correct option is C.

This is because secondary earners, who often have more flexible working schedules or are in part-time roles, are generally more responsive to changes in tax rates. They may choose to adjust their working hours to compensate for the increased tax burden or to maintain a certain level of after-tax income.

On the other hand, primary earners, who usually have less flexibility in their work hours and are responsible for a larger portion of the household income, tend to be less responsive to changes in payroll tax rates. Overall, this scenario highlights the differing labor market behavior of primary and secondary earners in response to changes in tax policies. The correct option is C.

To know more about empirical evidence, refer here:

https://brainly.com/question/15880833#

#SPJ11

Complete question:

If the payroll tax were increased, the empirical evidence suggests that:

a secondary earners would work more.

b. primary earners would work more.

c. secondary earners would change their hours worked more than would primary earners.

d primary earners would change their hours worked more than would secondary earners.

true/false. items that may relate to property, plant, and equipment follow: purchase price of a machine delinquent property taxes at the time of purchase

Answers

The cost of property, plant, and equipment includes expenses related to acquisition or construction, such as purchase price and installation costs. However, expenses related to financing, maintenance, or operation, such as interest on debt and repairs, are not included.

1. The purchase price of a machine is included in the cost of property, plant, and equipment.

2. Delinquent property taxes are not included in the cost of property, plant, and equipment, as they are not directly related to the acquisition or construction of the asset.

3. Interest on debt used to purchase equipment is not included in the cost of property, plant, and equipment, as it is considered a financing cost rather than a cost directly related to the asset's acquisition or construction.

4. Sales taxes paid on the purchase of equipment are included in the cost of property, plant, and equipment, as they are directly related to the acquisition of the asset.

5. Costs to install a machine are included in the cost of property, plant, and equipment, as they are directly related to the asset's acquisition or construction.

6. Ordinary repairs to equipment are not included in the cost of property, plant, and equipment, as they are considered maintenance expenses rather than costs directly related to the asset's acquisition or construction.

7. The cost to remodel a building is included in the cost of property, plant, and equipment, as it is considered an improvement to the asset.

8. Architectural fees paid for the design of a building are not included in the cost of property, plant, and equipment, as they are considered a design expense rather than a cost directly related to the asset's acquisition or construction.

9. The cost of training employees to run equipment is not included in the cost of property, plant, and equipment, as it is considered an operating expense rather than a cost directly related to the asset's acquisition or construction.

10. Transportation costs to have furniture delivered are not included in the cost of property, plant, and equipment, as they are considered a delivery expense rather than a cost directly related to the asset's acquisition or construction.

In summary, items directly related to the acquisition or construction of the asset, such as purchase price, sales taxes, and installation costs, are included in the cost of property, plant, and equipment.

On the other hand, items related to financing, maintenance, or operating the asset, such as interest on debt, repairs, and training costs, are generally not included in the cost of property, plant, and equipment.

To know more about cost refer here:

https://brainly.com/question/28255107#

#SPJ11

Complete Question:

Listed below are items that may relate to property, plant, and equipment.

1. Purchase price of a machine

2. Delinquent property taxes

3. Interest on debt used to purchase equipment

4. Sales taxes paid on the purchase of equipment

5. Costs to install a machine

6. Ordinary repairs to equipment

7. Cost to remodel a building

8. Architectural fees paid for the design of a building

9. Cost of training employees to run equipment

10. Transportation costs to have furniture delivered

Determine whether each item is included as part of the cost of property, plant, and equipment. For any item excluded from the cost of property, plant, and equipment, explains why the item was excluded.

A start-up company has the following expenses: Rent =$875 Utilities = $115 Material and assembly = $4.75/unit Monthly labor = $480
If its product sells for $18.99/unit, how many units must it sell to break even?

Answers

A start-up company has the following expenses: Rent =$875 Utilities = $115 Material and assembly = $4.75/unit Monthly labor = $480, If its product sells for $18.99/unit. 104 units must it sell to break even

To calculate the break-even point for the start-up company, we need to consider both the fixed costs and variable costs. Fixed costs include rent, utilities, and monthly labor, while variable costs include material and assembly costs per unit.

Fixed costs:
Rent = $875
Utilities = $115
Monthly labor = $480
Total fixed costs = $875 + $115 + $480 = $1,470

Variable cost per unit:
Material and assembly = $4.75/unit

Revenue per unit:
Product price = $18.99/unit

Now, we'll use the break-even formula: Break-even point (in units) = Fixed costs / (Revenue per unit - Variable cost per unit)

Break-even point (in units) = $1,470 / ($18.99 - $4.75)
Break-even point (in units) = $1,470 / $14.24 ≈ 103.23

Since the company cannot sell a fraction of a unit, it needs to sell 104 units to break even.

For more questions on: Utilities

https://brainly.com/question/12752018

#SPJ11

(4 points) Saved A leader who gives an individual employee or groups of employees the responsibi for making the decisions within some sets of specified boundary conditions is usi which decision making style? A. Autocratic B. Consultative C. Facilitative D. Delegative

Answers

A leader who gives an individual employee or groups of employees the responsibility for making decisions within some sets of specified boundary conditions is using the Delegative decision-making style. Therefore, the correct option is D.

The reasoning behind this is that the leader delegates decision-making authority to the individual employee or group of employees, allowing them to make decisions within certain limits or boundaries. In delegative decision-making style, the leader provides guidance and support but ultimately allows the employees to make the decisions within specified boundaries.

In contrast, autocratic decision making is characterized by the leader making decisions without input from others, consultative decision making involves seeking input from others before making a decision, and facilitative decision making involves guiding a group to reach a decision together.

Hence, the correct answer is option D:  Delegative.

Learn more about Delegative decision-making:

https://brainly.com/question/10133550

#SPJ11

A country has the production function Y = F(K, L) = K1/3L 2/3 where Y is its level of production, K its capital stock, and L its labor force. The country saves 24% of its output each year (s = 0.24) and has a population growth rate of 1% per year (n = 0.01). The capital depreciation rate is 5% per year (δ = 0.05). The labor force grows at the same rate as the population. There is no technological progress. The country is a closed economy. Use the Solow growth model to compute the steady state values of the following variables.
(a) capital per worker (k = K/L)
(b) output per worker (y = Y/L)
(c) consumption per worker (c)
(d) investments per worker (i)
(e) the growth rate of total production

Answers

The production function for the given country in the Solow growth model is Y = F(K, L) = K1/3L2/3,

What is the production function and parameters used in the Solow growth model for the given country?

The Solow growth model is an economic framework used to analyze the long-run behavior of an economy.

In this scenario, we use the Solow growth model to calculate the steady-state values of various variables such as capital per worker, output per worker, consumption per worker, investments per worker, and the growth rate of total production.

The production function Y = F(K, L) = K1/3L2/3 represents the country's level of production, where K is the capital stock and L is the labor force.

The country saves 24% of its output each year, has a population growth rate of 1% per year, and a capital depreciation rate of 5% per year.

Since the country is a closed economy and has no technological progress, we can use the Solow growth model to calculate the steady-state values of the given variables.

Learn more about production function

brainly.com/question/14041523

#SPJ11

Which one of the following actors benefits when interest rates go up? a. An investor who is about to buy bonds b.A company about to secure a fixed-rate loan an. c.A company with a fixed-rate loan d.An investor who already owns bonds

Answers

An investor who is already owning bonds benefits when interest rates go up because the value of their existing bonds increases. When interest rates rise, newly issued bonds will offer higher yields than existing bonds, which will cause the demand for existing bonds to increase, driving up their value.

An investor who is about to buy bonds does not benefit from rising interest rates, because bond prices typically fall when interest rates rise. This means the investor will be paying a higher price for the bonds. A company about to secure a fixed-rate loan does not benefit from rising interest rates, because they will have to pay a higher interest rate on their loan, resulting in higher borrowing costs.

A company with a fixed-rate loan benefits from rising interest rates, because their interest rate remains the same, and they are not affected by the increased cost of borrowing. This gives them a competitive advantage over companies that have to secure loans at higher rates. An investor who already owns bonds does not benefit from rising interest rates, because the value of their bonds typically decreases as interest rates rise, resulting in a lower resale value for their bonds.

To know more about bonds visit :

https://brainly.com/question/29667007

#SPJ11

Based on the table, what is the profit-maximizing output for John's Tricycle Company? Output Marginal Total Cost Revenue 5 1,200 7,500 6 1,300 9,000 7 1,400 10,500 8 1,500 12,000 1,600 13,500 A. 8 units B. 6 units OC. 9 units 0.7 units

Answers

To determine the profit-maximizing output for John's Tricycle Company, we need to calculate the marginal revenue and compare it to the marginal cost at each level of output.

Based on the information given in the table, the profit-maximizing output is 7 units. To find the marginal revenue, we can observe that the revenue increases by $1,500 as we move from 7 units to 8 units. Therefore, the marginal revenue of producing the 7th unit is $1,500.

To find the marginal cost, we can observe that the cost increases by $100 as we move from 6 units to 7 units. Therefore, the marginal cost of producing the 7th unit is $1,400.

Since the marginal revenue of producing the 7th unit ($1,500) is greater than the marginal cost of producing the 7th unit ($1,400), the company should continue to produce additional units until the marginal revenue equals the marginal cost. However, for any additional unit produced, the marginal cost would exceed the marginal revenue, leading to a decrease in profit. Therefore, the profit-maximizing output for John's Tricycle Company is 7 units.

To learn more about marginal revenue, click here:

https://brainly.com/question/31683012

#SPJ11

when a change in accounting principle is reported , what is likely sacrificed?

Answers

Answer:

Whenever a change in principles is made by a company, the company must retrospectively apply the change to all prior reporting periods, as if the new principle had always been in place, unless it is impractical to do so. This is known as "restating." Keep in mind that these requirements only impact direct effects, not indirect effects.

Explanation:

have a nice day.

Jill owns her own business and is looking for a financial institution to loan her money to expand her business to an additional location. Which financial institution is focused on helping businesses expand?.

Answers

A financial institution that is focused on helping businesses expand is typically a commercial bank.

Commercial banks offer various financial services and products tailored to the needs of businesses, including loans for expansion, working capital, equipment financing, and more.

They have specialized departments and teams dedicated to assisting businesses with their financial needs and providing guidance throughout the expansion process. Other financial institutions, such as credit unions or specialized business lenders, may also offer business expansion loans, but commercial banks are generally the primary institutions that businesses approach for financing their growth and expansion plans.

Visit here to learn more about financial institution brainly.com/question/29641948

#SPJ11

Please help



2) Write a ratio in three different forms.


3) Write it in simplest form.


4) Write two equivalent ratios.


5) Explain if in step 4 a proportion forms or not.


6) Use the definition of each (ratio, proportion) to show the difference

Answers

Let's consider the ratio of apples to oranges.

a) 2:3

b) 2/3

c) 2 out of 3

To simplify the ratio, we need to find the greatest common divisor (GCD) of the numbers in the ratio and divide both parts by it.

The GCD of 2 and 3 is 1, so we divide both parts by 1:

2/1 : 3/1

Simplified ratio: 2:3

Two equivalent ratios can be obtained by multiplying or dividing both parts of the ratio by the same non-zero number.

For example:

2:3 is equivalent to:

4:6 (multiplying both parts by 2)

1:1.5 (dividing both parts by 2)

In step 4, a proportion does not form. A proportion is a statement that two ratios are equal. In this case, we are simply finding equivalent ratios by multiplying or dividing both parts of the original ratio.

A ratio is a comparison of two quantities, usually expressed as a fraction or using a colon. It represents the relationship or relative size between the two quantities.

A proportion, on the other hand, is an equation that states two ratios are equal. It shows the equivalence of two ratios and implies that the same relationship holds true for the corresponding values in each ratio. Proportions are used to solve problems involving ratios and are particularly useful in solving for unknown quantities.

Read more about greatest common divisor at; brainly.com/question/14526360

#SPJ11

According to the lectures, since the 1980s prices in the US economy have been... a-cyclical counter-cyclical O pro-cyclical pop-sicle

Answers

According to the lectures, since the 1980s prices in the US economy have been pro-cyclical.

This means that prices tend to move in the same direction as the overall level of economic activity, meaning that they increase during periods of economic expansion and decrease during periods of economic contraction. There are several factors that contribute to this pro-cyclical behavior of prices, including the behavior of firms in response to changes in demand, the stickiness of prices in the short run, and the response of monetary policy to changes in the economy.

During periods of economic expansion, firms may increase their prices in response to increased demand for their products and services. Additionally, in the short run, prices may be slow to adjust due to factors such as menu costs or long-term contracts. Finally, monetary policy may respond to economic expansion by increasing interest rates, which can lead to higher prices through its effect on the cost of borrowing and the availability of credit.

Overall, the pro-cyclical behavior of prices is an important characteristic of the US economy that has implications for policymakers, investors, and consumers alike.

Learn more about economy here:

https://brainly.com/question/1226192

#SPJ11

Other Questions
How do I solve for determining the associated risk measure in this equipment investment in terms of the standard deviation? Reference: Table First Cost, $ Probability $60,000 0.25 0 S80,000 35 $100,000 0.30 $120,000 0.10 19. Find the expected EUAW from the financial data provided in the table for new equipment Because of the uncertainty of technology being used in this equipment, it has not been possible to get the initial cost accurately. The annual benefit, however; is estimated to be S25,000 with possible equipment life of 5 years_ The salvage value is expected to be 10% of the initial cost MARR =8% A) $2977 B) $5157 C) 83957 D) $4628 Answer: B Refer to: Table 10 20. Determine the associated risk measure in this equipment investment in terms of standard deviation A) $4,923 B) S6,123 C) S4437.8 D) $8,523 a researcher is interested in gathering in depth data on the victims of crime. which type of survey would be most appropriate? f(x) = 8 1 x6 f(x) = [infinity] n = 0 determine the interval of convergence. (enter your answer using interval notation.) f i = 0.80 a of current flows through a light bulb connected to a v = 120 v outlet, the power consumed is The 2's-complement operation on a signed number changes a positive number to a negative number and vice versaa)Falseb)True Edgar decided to add a second gate. He removes 2 yards t foot of fencing from his section of 13 yards. How much fencing is left? how old was usagi tsukino when she transformed into sailor moon? A farmer had 4/5 as many chickens as ducks. After she sold 46 ducks, another 14 ducks swam away, leaving her with 5/8 as many ducks as chickens. How many ducks did she have left? Add3/5+7/8+3/10 Enter your answer in the box as a mixed number in simplest form. Assuming that ptr is a pointer to an int, what happens when you add 4 to it? Select one: O a. The address is advanced by 4 bytes in memory. b. The new address is the sum of the old address plus 4. c. 4 is added to the int pointed to by ptr. d. The address points to the next int in memory since an int occupies 4 bytes. e. The pointer will move 4 integers forward in memory. How have the political difficulties the tibetan people have experienced influenced the development of buddhism in tibet? a.if the video game industry has a rothschild index of 0.25, what does that mean In a given hypothesis test, the null hypothesis can be rejected at the 0.10 and the 0.05 level of significance, but cannot be rejected at the 0.01 level. The most accurate statement about the p- value for this test is: A. p-value = 0.01 B. 0.01 < p-value < 0.05 C. 0.05 value < 0.10 D. p-value = 0.10 Define the sequence {an} as follows: ai - 2 an = an-1 + 2n for n > 2 Use induction to prove that an explicit formula for this sequence is given by: an = n(n + 1) for n > 1. the physical procedure whereby an unauthorized person gains access to a location by following an authorized user is known as? Will give brainliest if correctExplain your answer please! if the area of a square is a^2 +10a +25 which of the following binomials represents the length of each of it sides a client with a diagnosis of prostate cancer is scheduled to have an interstitial implant for high-dose radiation (hdr). what safety measure should the nurse include in this client's plan of care? what is the worst-case space complexity of a bst? Briefly explain one development from the period of 1945 to 1990 that could be used to challenge the point of view you identified in part a.