Answer:
a) RADIATION, b) CONVECTION, c) CONDUCTION, d) CONVECTION
Explanation:
In the heating processes there can be three types: conduction, convention and radiation.
The conduction process occurs when the movement of atoms or thermal agitation of molecules creates the transfer of thermal energy.
The convention process occurs when there is a movement of matter creating the transfer of energy
The process of Radiation an electromagnetic wave indexes on a material and is absorbed, creating the process of energy transfer.
Now let's examine each situation>
a)Warming of the Earth's surface on a sunny day
in this case the sunlight heats the earth as it is absorbed, which is why it is a RADIATION process
b) On a sunny afternoon, you watch cumulus clouds forming
in this case the nines rise from the surface, since it is a moving mass, the process is CONVECTION
c) A very shallow layer of air in contact with the ground is warmed
in this case the thermal movement of the layer molecules heat the earth, for which the process of CONDUCTION
d) A south wind carries warm air into the central United States
As we have a movement of a mass of matter, the process is CONVECTION.
How many feet does a No. 2 pencil last?
Answer:45,000
Explanation:
:TIL the average pencil holds enough graphite to draw a line about 35 miles long or to write roughly 45,000 words
HELP ME PLSSSS!!!!!!!
Which statement describes why the viscosity of olive oil is higher than that of
rubbing alcohol?
A. The molecules that make up olive oil are longer than those that
make up alcohol, so they have more resistance to sliding past one
another.
B. The molecules that make up olive oil repel one another, while the
molecules that make up alcohol are attracted to one another.
C. The molecules that make up olive oil are shorter than those that
make up alcohol, so they have more resistance to sliding past one
another.
D. The molecules that make up olive oil are attracted to one another,
while the molecules that make up alcohol repel one another.
Answer:B
Explanation: The answer explains it
The molecules that make up olive oil are longer than those that make up alcohol, so they have more resistance to sliding past one another. The correct answer is option A.
This higher resistance to flow leads to a higher viscosity in olive oil compared to rubbing alcohol. Viscosity is a measure of a fluid's resistance to flow, and longer molecules in olive oil result in stronger intermolecular forces and entanglements. In contrast, rubbing alcohol has shorter and less complex molecules, which allow them to move more freely and exhibit lower viscosity. The molecular structure and intermolecular forces play a crucial role in determining the viscosity of liquids, making olive oil more viscous than rubbing alcohol. Option A is correct.
To know more about rubbing alcohol, here
brainly.com/question/10846317
#SPJ2
A car traveling at 14 m/s accelerates at 3.5 m/s² for 5 seconds. How much distance does it travel during that time?
Answer: 113.75
Explanation:
You know
acceleration = a = 3.5 m/s²
time = t = 5 seconds
initial velocity = u = 14 m/s
Unknown is distance = s = ?
Use equation: s = ut + [tex]\frac{1}{2}[/tex] at²
Substitute all the known values inside the equation:
s = (14*5) + 0.5 * 3.5 * 5²
s = 70 + 43.75 = 113.75 m
The car travels 113.75 metres.
A wheelbarrow can be used to help lift a load, such as a pile of dirt, and then push the load across a distance.
A man pushes a wheelbarrow.
Which simple machines make up a wheelbarrow?
a pulley and an inclined plane
a wheel and axle and a lever
a pulley and a wheel and axle
a lever and a wedge
Answer:
a wheel and axle and a lever
The wheelbarrow has a wheel and the then the barrow. The wheel is an wheel and axle machine while the other part is a lever.
What is a simple machine?A simple machine is a device that is used to make work easier. It ensures that less effort is applied to overcome a large load.
The wheelbarrow has a wheel and the then the barrow. The wheel is an wheel and axle machine while the other part is a lever.
Learn more about simple machines:https://brainly.com/question/10075890
#SPJ2
Consider the heaviest box of 150 lb that you can push at constant speed across a level floor, where the coefficient of kinetic friction is 0.45, and estimate the maximum horizontal force that you can apply to the box. A box sits on a ramp that is inclined at an angle of 60.0° above the horizontal. The coefficient of kinetic friction between the box and the ramp is 0.45.
If you apply the same magnitude force, now parallel to the ramp, that you applied to the box on the floor, what is the heaviest box (in pounds) that you can push up the ramp at constant speed? (In both cases assume you can give enough extra push to get the box started moving.)
Maximum horizontal force that can be applied on the box is 300.32 N.
Mass of the heaviest box that can be pushed on the ramp at constant speed is 105.16 pound.
What is meant by kinetic friction ?Kinetic friction is defined as the opposing force exerted by the surface on an object in contact with it, when there is relative motion between the two surfaces.
Here,
Mass of the box, m = 150 lb = 68.1 kg
Coefficient of kinetic friction, μ = 0.45
Maximum horizontal force that can be applied on the box is the kinetic frictional force. Frictional force,
F(k) = μmg
F(k) = 0.45 x 68.1 x 9.8
F(k) = 300.32 N
Now, the box sits on a ramp inclined at 60°
Coefficient of kinetic friction, μ = 0.45
The net force here acting on the box placed in the ramp is due to the kinetic frictional force and the weight of the box.
So,
Frictional force, F(k)' = μmgcosθ
F(k)' = 0.45 x M x 9.8 x cos 60
F(k)' = 2.2M
Weight of the box acting horizontally,
W = Mgsinθ
W = M x 9.8 x sin60
W = 8.5M
Therefore, net force,
Fn = W - F(k)'
Fn = 8.5M - 2.2M
Fn = 6.3M
The total force acting on the box is
F = F(k) - Fn
ma = 300.32 - 6.3M
Since, the box is moving with constant speed, the acceleration, a = 0
Therefore,
300.32 - 6.3M = 0
6.3M = 300.32
M = 300.32/6.3
M = 47.7 kg = 105.16 pound
Hence,
Maximum horizontal force that can be applied on the box is 300.32 N.
Mass of the heaviest box that can be pushed on the ramp at constant speed is 105.16 pound.
To learn more about kinetic friction, click:
https://brainly.com/question/29100737
#SPJ2
A swift blow with the hand can break a pine board. As the hand hits the board, the kinetic energy of the hand is transformed into elastic potential energy of the bending board; if the board bends far enough, it breaks. Applying a force to the center of a particular pine board deflects the center of the board by a distance that increases in proportion to the force. Ultimately the board breaks at an applied force of 870 N and a deflection of 1.4 cm.
a. To break the board with a blow from the hand, how fast must the hand be moving? Use 0.50 kg for the mass of the hand.
b. If the hand is moving this fast and comes to rest in a distance of 1.2 cm, what is the average force on the hand?
Answer:
A. The hand must move with a velocity of 6.98 m/s to break the board.
B. Average force on the hand = 1025 N
Explanation:
A.To determine the speed the hand must move with to break the board, the force workdone in breaking the board is found first.
Workdone = force × distance
Minimum force required = 870 N;
Distance moved by board/Deflection in order to break = 1.4 cm = 0.014 M
Workd done = 870 N × 0.014 m = 12.18 Nm or 12.18 J
This work done = Kinetic energy of the hand
Kinetic energy = mv²/2 ; where m is mass and v is velocity
Mass of hand = 0.50 Kg, velocity = ?, K.E. = 12.18 J
v² = 2 KE/m
v = √2KE/m
v = √(2 × 12.18/0.50)
v = 6.98 m/s
Therefore, the hand must move with a velocity of 6.98 m/s to break the board.
B. Average force on the hand
This can be determined using the equation of motion, v² = u² + 2as to find acceleration, since force = mass × acceleration
From the equation of motion, a = v² - u²/2s
At rest, v = 0, u = 6.98, s = 1.2 cm = 0.012 m
a = 0² - 6.98²/ 2 × 0.012
a = -2030 m/s²
Force = 2030 m/s² × 0. 50 kg = 1015 N
Therefore, Average force on the hand = 1025 N
A car of mass 500 kg is moving at a speed of 1.2 m/s. A man pushes the car,
increasing the speed to 2 m/s. How much work did the man do?
A. 640 J
B. 360 J
C. 1360 J
D. 1000 J
Work done by man will be A. 640 J
What is work energy theorem?
The work-energy theorem states that the net work done by the forces on an object equals the change in its kinetic energy.
according to work energy theorem
Work done = final Kinetic energy - initial kinetic energy
= KE (final) - KE (initial )
= 1/2 m ([tex]v^{2}[/tex]) - 1/2 m ([tex]u^{2}[/tex])
= 1/2 m ([tex]v^{2}[/tex] - [tex]u^{2}[/tex])
= 1/2 * 500 * ( [tex]2^{2}[/tex] - [tex]1.2^{2}[/tex])
= 250 * 2.56 = 640 J
correct answer is A. 640 J
learn more about work energy theorem
https://brainly.com/question/10063455?referrer=searchResults
#SPJ2
The formula to convert oF to oC =5/9( F -32)
A student solving a physics problem to find the unknown has applied physics principles and obtained the expression: μkmgcosθ=mgsinθ−ma, where g=9.80meter/second2, a=3.60meter/second2, θ=27.0∘, and m is not given. Which of the following represents a simplified expression for μk?A student solving a physics problem to find the unknown has applied physics principles and obtained the expression: , where , , , and is not given. Which of the following represents a simplified expression for ?tanθ− agTo avoid making mistakes, the expression should not be simplified until the numerical values are substituted.gsinθ−agcosθThe single equation has two unknowns and cannot be solved with the information given.
Solution :
Given expression :
[tex]$\mu_k$[/tex]mgcosθ = mgsinθ − ma
Here, g = 9.8 [tex]m/s^2[/tex] , a = 3.60 [tex]m/s^2[/tex] , θ = 27°
Therefore,
[tex]$\mu_k mg \cos \theta = mg \sin \theta - ma$[/tex]
[tex]$\mu_k mg \cos \theta = m(g \sin \theta - a)$[/tex]
[tex]$\mu_k g \cos \theta = (g \sin \theta - a)$[/tex]
[tex]$\mu_k =\frac{(g \sin \theta-a)}{g \cos \theta}$[/tex]
Mow calculating the coefficient of kinetic friction as follows :
[tex]$\mu_k=\frac{g \sin \theta-a}{g \cos \theta}$[/tex]
[tex]$\mu_k=\frac{9.8 \times \sin 27^\circ-3.60}{9.8 \times \cos 27^\circ}$[/tex]
[tex]$\mu_k=0.097$[/tex]
Khối lượng ban đầu của mặt trời m⊙ = 2 × 1030 kg trong đó có 71 % là
hydrogen. Trong 5×10^9 năm đầu tiên, mặt trời phát ra năng lượng với công suất
3.86 × 10^26 W, nhờ phản ứng
4p → 4+2He + 2e
+ 2νe + 26 MeV
trong đó bốn proton tổng hợp thành hạt α và tỏa ra năng lượng 26 MeV. Hãy
xác định
a) số hạt proton của mặt trời tại thời điểm ban đầu.
b) số hạt proton của mặt trời tham gia phản ứng trong 1 năm.
c) số hạt proton còn lại trong mặt trời sau 5 × 10^9 năm.
d) thời gian để tiêu thụ hết 10 % số hạt proton còn lại của mặt trời
Answer:
jsgssbvwsvs
Explanation:
ifmd understand
A system consists of a disk of mass 2.0 kg and radius 50 cm upon which is mounted an annular cylinder of mass 1.0 kg with inner radius 20 cm and outer radius 30 cm (see below). The system rotates about an axis through the center of the disk and annular cylinder at 10 rev/s. (a) What is the moment of inertia of the system
Complete Question
A system consists of a disk of mass 2.0 kg and radius 50 cm upon which is mounted an annular cylinder of mass 1.0 kg with inner radius 20 cm and outer radius 30 cm (see below). The system rotates about an axis through the center of the disk and annular cylinder at 10 rev/s.
(a) What is the moment of inertia of the system
(b) What is its rotational kinetic energy? axis 50 cm 30 cm 20 cm
Answer:
a) [tex]M.I=0.32kg.m^2[/tex]
b) [tex]K.E=621.8J[/tex]
Explanation:
From the question we are told that:
Mass [tex]m=2.0kg[/tex]
Disk Radius [tex]r_d=50cm=0.5m[/tex]
Mass of annular cylinder [tex]M_c=1.0kg[/tex]
Inner Radius of cylinder [tex]R_i=20cm=0.2m[/tex]
Outer Radius of cylinder [tex]R_o=0.3m[/tex]
Angular Velocity [tex]\omega=10rev/s=2 \pi*10=62.83[/tex]
Generally the equation for moment of inertia is mathematically given by
[tex]M.I=0.5M r_d^2+0.5M_c(R_i^2+R_o^2)[/tex]
[tex]M.I=0.5(2*0.50)^2)+0.5*1*(0.2^2+0.30^)[/tex]
[tex]M.I=0.32kg.m^2[/tex]
Generally the equation for Rotational Kinetic Energy is mathematically given by
[tex]K.E=0.5M.I \omega^2[/tex]
[tex]K.E=0.5 *0.32*62.83[/tex]
[tex]K.E=621.8J[/tex]
The angle between the reflected ray and the normal line is called the________________
Answer:
Angle of reflection
Explanation:
The angle between the reflected ray and the normal line is called the angle of reflection
Answer:
Activity 2 Directions: Solve the following problems using Charles' Law,
1. A 3.8 mL of a gas in a container has a temperature of 2.0K. What would the volume be if the temperature becomes 8.0K?
2. If at 27°C the volume of a dry gas is 3.0 ml. What is the new temperature if the volume increased to 7.5 ml?
3. The temperature of the gas is 460,0 mL at 3.5°C. Calculate the new volume at 1.5°C
define force and types of force
Answer:
Force is the strength or weight of things that depends on movement. The types of forces are conteact force, spring force, applied force, air resistance force, normal force, frictional force, tension force, and non-contact force.
Verify that your equation has the masses and the velocities before and after the collision. Solve equation for the initial velocity of the projectile, Vo. As the bob swings upward from h1 to a max of h2, what is happening to the kinetic energy of the system?
Answer:
Decrease occur in kinetic energy.
Explanation:
The kinetic energy decreases when the the Bob swings reaches to the maximum height because the motion of the bob slower down. At maximum height, the kinetic energy decreases whereas the value of potential energy is the highest. The main reason of higher potential energy is that it depends on height of an object while on the other hand, kinetic energy depends on the motion of an object so that's why the value of kinetic energy decreases and potential energy increases at maximum height of the bob.
Mỗi giây có 2,1.1018 ion+
2 và 1,8.1018
electron chạy qua tiết diện đèn ống.
Đường kính tiết diện của đèn ống là 2,0
cm. Mật độ dòng điện trung bình qua
đèn là bao nhiêu
While riding his bike through a neighborhood, Joe notices a red sign out of
the corner of his eye. He quickly comes to a stop. Which active reading
strategy is he using?
A. Asking questions
B. Making mental images
C. Summarizing
D. Using visual cues
SUBMIT
Answer:
B
Explanation:
because it take to the thought of a situation
Answer:
d i think
Explanation:
and are u using IXL???
what are parasites? Give some example
Answer:
parasites are creatures the gain benefit off of other animals usually harming them eg:ticks on dogs
equations of kinematics new dimensions
Answer:
Δx Displacement
t Time interval
v0 Initial velocity
v Final velocity
a Constant acceleration
Explanation:
I dont know if this helps because these are kinda like, examples... hope it helps tho :)
(d) A glass prism made from a material of refractive index 1.86 has a refracting angle of 60. The prism is immersed in a water of refractive index 1.33. Determine the minimum deviation for a parallel beam of light transversing the prism
Answer:
The angle of minimum deviation is 28.72°
Explanation:
u welcome
Certain rifles can fire a bullet with a speed of 950 m/s just as it leaves the muzzle (this speed is called the muzzle velocity). The muzzle is 75.0 cm long and the bullet is accelerated uniformly from rest within it. What is the acceleration (in {g}'s) of the bullet in the muzzle? If, when this rifle is fired vertically, the bullet reaches a maximum height {H}, what would be the maximum height (in terms of H) for a new rifle that produced half the muzzle velocity of this one?
Answer:
a) By [tex]v^2 = u^2 + 2as[/tex] => a= 70291.70.
(b)By [tex]v = u + at[/tex] => t= 1.58 ms.
(c)By [tex]v^2 = u^2 - 2gh[/tex] => H = 46045.92 m.
Explanation:
a) By [tex]v^2 = u^2 + 2as[/tex]
[tex](950)^2 = 0 + 2 \times a \times 0.75\\a = 601666.67 m/s^2\\a/g = 688858.70/9.8 = 70291.70[/tex]
(b)By [tex]v = u + at[/tex]
[tex]950 = 0 + 601666.67 \times t\\t = 1.58 x 10^-3 sec = 1.58 ms[/tex]
(c)By [tex]v^2 = u^2 - 2gh[/tex]
[tex]0 = (950)^2 - 2 \times9.8 \times H\\H = 46045.92 m[/tex]
a motor car reaches a velocity of 15m/s in 6s from rest on a perfect test track . what is the average acceleration
Answer:
[tex]{ \tt{initial \: velocity, \: u = 0}} \: (at \: rest) \\ { \tt{final \: velocity, \: v = 15 { {ms}^{ - 1} }}} \\ { \tt{time, \: t = 6s}} \\ { \bf{from \: first \: newtons \: equation \: of \: motion : }} \\ { \bf{v = u + at}} \\ { \tt{15 = 0 + (a \times 6)}} \\ { \tt{6a = 15}} \\ { \tt{acceleration, \: a = 2.5 \: {ms}^{ - 2} }}[/tex]
You have been hired to design a spring-launched roller coaster that will carry two passengers per car. The car goes up a 13-m-high hill, then descends 20 m to the track's lowest point. You've determined that the spring can be compressed a maximum of 2.4 m and that a loaded car will have a maximum mass of 430 kg. For safety reasons, the spring constant should be 13 % larger than the minimum needed for the car to just make it over the top. Part A What spring constant should you specify
Answer:
22.15 N/m
Explanation:
As we know potential energy = m*g*h
Potential energy of spring = (1/2)kx^2
m*g*h = (1/2)kx^2
Substituting the given values, we get -
(400)*(9.8)*(10) = (0.5)*(k)*(2.0^2)
k = 39200/2.645
k = 19600 N/m
For safety reasons, this spring constant is increased by 13 % So the new spring constant is
k = 19600 * 1.13 = 22148 N/m = 22.15 N/m
can someone please help me
F = 153 N
[tex]\theta = 11.3°[/tex]
Explanation:
Let us define first our directional convention. Anything pointing up or to the right is considered positive and anything pointing down or to the left is considered negative. Now let's look at the components [tex]F_{x}[/tex] and [tex]F_{y}[/tex]:
[tex]F_{x}[/tex] = 350 N - 200 N = 150 N
[tex]F_{y}[/tex] = 180 N - 150 N = 30 N
The magnitude of the resultant force F is given by
[tex]F = \sqrt{F_{x}^{2}+F_{y}^{2}}[/tex]
[tex]\:\:\:\:\:\:= \sqrt{(150\:N)^{2}+(30\:N)^{2}}[/tex]
[tex]\:\:\:\:\:\:=153\:N[/tex]
To find the direction [tex]\theta[/tex], we use
[tex]\tan \theta = \dfrac{F_{y}}{F_{x}}=\dfrac{30\:N}{150\:N}=0.2[/tex]
or
[tex]\theta = \tan^{-1}(0.2) = 11.3°[/tex]
A supernova is a large explosion that takes place at the end of a star's life cycle. Although supernovas only burn for a short amount of time, they can tell scientists a lot about the universe. Scientists use electromagnetic waves to detect supernovas. Why are electromagnetic waves used instead of sound waves?
A. Electromagnetic waves are created by physical vibrations.
B. Electromagnetic waves travel slower than sound waves.
C. Electromagnetic waves can travel in vacuums.
D. Electromagnetic waves cannot be absorbed.
Electromagnetic waves can travel in vacuums.
To find the correct statement among all the options, we need to know more about the electromagnetic wave.
What is electromagnetic wave?Electromagnetic wave is a transeverse wave in which both the electric field and magnetic field travel simultaneously.The electric field and magnetic field are perpendicular to each other and perpendicular to the direction of prapagation of the EM wave.How is the electromagnetic wave created?Electromagnetic wave is created from the oscillation of any charge particles like electron, proton, ions etc. .
What is the speed of electromagnetic waves?The speed of electromagnetic wave in vacuums is maximum that is 3×10⁸ m/s. (Speed of EM wave is much more than that of sound (340m/s)).In any other medium, its speed changes and it depends on the refractive index of that medium.How is the electromagnetic wave affected by medium?In any medium, the electromagnetic wave is absorbed to some extent except ideal vacuum. Also in vacuum in space, it's absorbed; because the vacuum in space is not completely vacuum since it contains few molecules per cubic kilometers.However, the electromagnetic wave can travel in any medium even in vacuum while the sound wave can travel only in particle medium.Thus we conclude that scientists use electromagnetic waves to detect supernovas because electromagnetic waves can travel in vacuums.
Learn more about electromagnetic wave here;
https://brainly.com/question/13874687
#SPJ2
Speed of light in water
Answer:
225,000 kilometers per second
Explanation:
Have a nice day
Two parallel conducting plates are separated by 10.0 cm, and one of them is taken to be at zero volts. (a) What is the electric field strength between them, if the potential 8.00 cm from the zero volt plate
Complete Question
Two parallel conducting plates are separated by 10.0 cm, and one of them is taken to be at zero volts. (a) What is the electric field strength between them, if the potential 8.00 cm from the zero volt plate(and 2.00 cm from the other) is 450 V?
Answer:
[tex]V'=562.5v[/tex]
Explanation:
From the question we are told that:
Separation distance [tex]d=10cm[/tex]
Voltage at 8cm [tex]V_8=450v[/tex]
Generally the equation for Voltage is mathematically given by
[tex]|V|=|E.d|[/tex]
Where
E=electric field
Therefore
At [tex]d=0.8[/tex]
[tex](450-0)V=E*(0.08m)[/tex]
[tex]E=\frac{450}{0.08}[/tex]
[tex]E=5625v/m[/tex]
Therefore
At [tex]d=10[/tex]
[tex]V'=Ed[/tex]
[tex]V'=5625*0.1m[/tex]
[tex]V'=562.5v[/tex]
A 3.0 kg pendulum swings from point A of height ya = 0.04 m to point B of height yb = 0.12 m, as seen in the diagram below.
Answer:
3.0−0.12=2.88 or 2.88÷0.04=72
0.04×3.0=0.12 and 0.04+3.0=3.04
Answer: 2.4 J
Explanation: Khan Academy
If we use 1 millimeter to represent 1 light-year, how large in diameter is the Milky Way Galaxy?
Answer:
if 1 light year was one millimeter then 105,700 light years = 105,700 mm, (or 105.7 meters in case you needed to simplify or something)
Two stars that are in the same constellation:
Answer:
A binary star is a star system consisting of two stars orbiting around their common barycenter.
❣️(◍Jess bregoli◍)❣️#keep learning
advantages of 2 pulley system
Answer:
Using multiple pulleys decreases the amount of force necessary to move an object by increasing the amount of rope used to raise the object. The mechanical advantage (MA) of a pulley system is equal to the number of ropes supporting the movable load.