Answer:
(a) V = 3.75 x 10^5 V
(b) q = 5.2 x 10^-6 C
Explanation:
Diameter, d = 25 cm
radius, r = 12.5 cm = 0.125 m
Electric field, E = 3 x 10^6 V/m
(a) The maximum potential is given by
[tex]V = E \times r \\\\V = 3\times 10^6\times 0.125\\\\V = 3.75\times10^5 V[/tex]
(b) The charge is given by
[tex]V = \frac{k q}{r}\\\\3.75\times10^5=\frac{9\times10^9\times q}{0.125}\\\\q = 5.2\times 10^{-6} C[/tex]
Verify that your equation has the masses and the velocities before and after the collision. Solve equation for the initial velocity of the projectile, Vo. As the bob swings upward from h1 to a max of h2, what is happening to the kinetic energy of the system?
Answer:
Decrease occur in kinetic energy.
Explanation:
The kinetic energy decreases when the the Bob swings reaches to the maximum height because the motion of the bob slower down. At maximum height, the kinetic energy decreases whereas the value of potential energy is the highest. The main reason of higher potential energy is that it depends on height of an object while on the other hand, kinetic energy depends on the motion of an object so that's why the value of kinetic energy decreases and potential energy increases at maximum height of the bob.
What is the y component of a vector that is 673 m at -38o?
Answer:
D_y = 414.38m
Explanation:
D_y = D*sin(x)
D_y = 673m*sin(38°)
D_y = 414.38m
If we use 1 millimeter to represent 1 light-year, how large in diameter is the Milky Way Galaxy?
Answer:
if 1 light year was one millimeter then 105,700 light years = 105,700 mm, (or 105.7 meters in case you needed to simplify or something)
A student solving a physics problem to find the unknown has applied physics principles and obtained the expression: μkmgcosθ=mgsinθ−ma, where g=9.80meter/second2, a=3.60meter/second2, θ=27.0∘, and m is not given. Which of the following represents a simplified expression for μk?A student solving a physics problem to find the unknown has applied physics principles and obtained the expression: , where , , , and is not given. Which of the following represents a simplified expression for ?tanθ− agTo avoid making mistakes, the expression should not be simplified until the numerical values are substituted.gsinθ−agcosθThe single equation has two unknowns and cannot be solved with the information given.
Solution :
Given expression :
[tex]$\mu_k$[/tex]mgcosθ = mgsinθ − ma
Here, g = 9.8 [tex]m/s^2[/tex] , a = 3.60 [tex]m/s^2[/tex] , θ = 27°
Therefore,
[tex]$\mu_k mg \cos \theta = mg \sin \theta - ma$[/tex]
[tex]$\mu_k mg \cos \theta = m(g \sin \theta - a)$[/tex]
[tex]$\mu_k g \cos \theta = (g \sin \theta - a)$[/tex]
[tex]$\mu_k =\frac{(g \sin \theta-a)}{g \cos \theta}$[/tex]
Mow calculating the coefficient of kinetic friction as follows :
[tex]$\mu_k=\frac{g \sin \theta-a}{g \cos \theta}$[/tex]
[tex]$\mu_k=\frac{9.8 \times \sin 27^\circ-3.60}{9.8 \times \cos 27^\circ}$[/tex]
[tex]$\mu_k=0.097$[/tex]
What is the direction of a vector with an x component of -12 m and a y component of -15 m?
Answer:
[tex]51.34^{\circ}[/tex]
Explanation:
Given that,
x component of a vector = -12 m
The y component of a vector = -15 m
We need to find the direction of a vector. The direction of a vector is given by :
[tex]\tan\theta=\dfrac{y}{x}[/tex]
Put all the values,
[tex]\tan\theta=\dfrac{-15}{-12}\\\\\theta=\tan^{-1}(\dfrac{-15}{-12})\\\\\theta=51.34^{\circ}[/tex]
So, the direction of vector is [tex]51.34^{\circ}[/tex] to x component.
A supernova is a large explosion that takes place at the end of a star's life cycle. Although supernovas only burn for a short amount of time, they can tell scientists a lot about the universe. Scientists use electromagnetic waves to detect supernovas. Why are electromagnetic waves used instead of sound waves?
A. Electromagnetic waves are created by physical vibrations.
B. Electromagnetic waves travel slower than sound waves.
C. Electromagnetic waves can travel in vacuums.
D. Electromagnetic waves cannot be absorbed.
Electromagnetic waves can travel in vacuums.
To find the correct statement among all the options, we need to know more about the electromagnetic wave.
What is electromagnetic wave?Electromagnetic wave is a transeverse wave in which both the electric field and magnetic field travel simultaneously.The electric field and magnetic field are perpendicular to each other and perpendicular to the direction of prapagation of the EM wave.How is the electromagnetic wave created?Electromagnetic wave is created from the oscillation of any charge particles like electron, proton, ions etc. .
What is the speed of electromagnetic waves?The speed of electromagnetic wave in vacuums is maximum that is 3×10⁸ m/s. (Speed of EM wave is much more than that of sound (340m/s)).In any other medium, its speed changes and it depends on the refractive index of that medium.How is the electromagnetic wave affected by medium?In any medium, the electromagnetic wave is absorbed to some extent except ideal vacuum. Also in vacuum in space, it's absorbed; because the vacuum in space is not completely vacuum since it contains few molecules per cubic kilometers.However, the electromagnetic wave can travel in any medium even in vacuum while the sound wave can travel only in particle medium.Thus we conclude that scientists use electromagnetic waves to detect supernovas because electromagnetic waves can travel in vacuums.
Learn more about electromagnetic wave here;
https://brainly.com/question/13874687
#SPJ2
We say that evaporation is a cooling process. (a) What cools and what warms? We say that condensation is a warming process. (b) What warms and what cools?
Answer:
a liquid warms gas cools
b solid piece warms and liquid cools
Consider the heaviest box of 150 lb that you can push at constant speed across a level floor, where the coefficient of kinetic friction is 0.45, and estimate the maximum horizontal force that you can apply to the box. A box sits on a ramp that is inclined at an angle of 60.0° above the horizontal. The coefficient of kinetic friction between the box and the ramp is 0.45.
If you apply the same magnitude force, now parallel to the ramp, that you applied to the box on the floor, what is the heaviest box (in pounds) that you can push up the ramp at constant speed? (In both cases assume you can give enough extra push to get the box started moving.)
Maximum horizontal force that can be applied on the box is 300.32 N.
Mass of the heaviest box that can be pushed on the ramp at constant speed is 105.16 pound.
What is meant by kinetic friction ?Kinetic friction is defined as the opposing force exerted by the surface on an object in contact with it, when there is relative motion between the two surfaces.
Here,
Mass of the box, m = 150 lb = 68.1 kg
Coefficient of kinetic friction, μ = 0.45
Maximum horizontal force that can be applied on the box is the kinetic frictional force. Frictional force,
F(k) = μmg
F(k) = 0.45 x 68.1 x 9.8
F(k) = 300.32 N
Now, the box sits on a ramp inclined at 60°
Coefficient of kinetic friction, μ = 0.45
The net force here acting on the box placed in the ramp is due to the kinetic frictional force and the weight of the box.
So,
Frictional force, F(k)' = μmgcosθ
F(k)' = 0.45 x M x 9.8 x cos 60
F(k)' = 2.2M
Weight of the box acting horizontally,
W = Mgsinθ
W = M x 9.8 x sin60
W = 8.5M
Therefore, net force,
Fn = W - F(k)'
Fn = 8.5M - 2.2M
Fn = 6.3M
The total force acting on the box is
F = F(k) - Fn
ma = 300.32 - 6.3M
Since, the box is moving with constant speed, the acceleration, a = 0
Therefore,
300.32 - 6.3M = 0
6.3M = 300.32
M = 300.32/6.3
M = 47.7 kg = 105.16 pound
Hence,
Maximum horizontal force that can be applied on the box is 300.32 N.
Mass of the heaviest box that can be pushed on the ramp at constant speed is 105.16 pound.
To learn more about kinetic friction, click:
https://brainly.com/question/29100737
#SPJ2
the oscillation of pendulum is ...... motion
Answer:
A simple pendulum consists of a ball (point-mass) m hanging from a (massless) string of length L and fixed at a pivot point P. When displaced to an initial angle and released, the pendulum will swing back and forth with periodic motion.
(d) A glass prism made from a material of refractive index 1.86 has a refracting angle of 60. The prism is immersed in a water of refractive index 1.33. Determine the minimum deviation for a parallel beam of light transversing the prism
Answer:
The angle of minimum deviation is 28.72°
Explanation:
u welcome
advantages of 2 pulley system
Answer:
Using multiple pulleys decreases the amount of force necessary to move an object by increasing the amount of rope used to raise the object. The mechanical advantage (MA) of a pulley system is equal to the number of ropes supporting the movable load.Khối lượng ban đầu của mặt trời m⊙ = 2 × 1030 kg trong đó có 71 % là
hydrogen. Trong 5×10^9 năm đầu tiên, mặt trời phát ra năng lượng với công suất
3.86 × 10^26 W, nhờ phản ứng
4p → 4+2He + 2e
+ 2νe + 26 MeV
trong đó bốn proton tổng hợp thành hạt α và tỏa ra năng lượng 26 MeV. Hãy
xác định
a) số hạt proton của mặt trời tại thời điểm ban đầu.
b) số hạt proton của mặt trời tham gia phản ứng trong 1 năm.
c) số hạt proton còn lại trong mặt trời sau 5 × 10^9 năm.
d) thời gian để tiêu thụ hết 10 % số hạt proton còn lại của mặt trời
Answer:
jsgssbvwsvs
Explanation:
ifmd understand
HELP ME PLSSSS!!!!!!!
Which statement describes why the viscosity of olive oil is higher than that of
rubbing alcohol?
A. The molecules that make up olive oil are longer than those that
make up alcohol, so they have more resistance to sliding past one
another.
B. The molecules that make up olive oil repel one another, while the
molecules that make up alcohol are attracted to one another.
C. The molecules that make up olive oil are shorter than those that
make up alcohol, so they have more resistance to sliding past one
another.
D. The molecules that make up olive oil are attracted to one another,
while the molecules that make up alcohol repel one another.
Answer:B
Explanation: The answer explains it
The molecules that make up olive oil are longer than those that make up alcohol, so they have more resistance to sliding past one another. The correct answer is option A.
This higher resistance to flow leads to a higher viscosity in olive oil compared to rubbing alcohol. Viscosity is a measure of a fluid's resistance to flow, and longer molecules in olive oil result in stronger intermolecular forces and entanglements. In contrast, rubbing alcohol has shorter and less complex molecules, which allow them to move more freely and exhibit lower viscosity. The molecular structure and intermolecular forces play a crucial role in determining the viscosity of liquids, making olive oil more viscous than rubbing alcohol. Option A is correct.
To know more about rubbing alcohol, here
brainly.com/question/10846317
#SPJ2
A pitcher throws a curveball that reaches the catcher in 0.61 s. The ball curves because it is spinning at an average angular velocity of 350 rev/min (assumed constant) on its way to the catcher's mitt. What is the angular displacement of the baseball (in radians) as it travels from the pitcher to the catcher
Answer:
22.36 rad
Explanation:
Applying,
ω = θ/t.............. Equation 1
Where ω = angular velocity, θ = angular displacement of the baseball, t = time
make θ the subject of the equation
θ = ωt............... Equation 2
From the question,
Given: ω = 350 rev/min = 350(0.10472) = 36.652 rad/s, t = 0.61 s
Substitute these values into equation 1
θ = 0.61(36.652)
θ = 22.36 rad
Hence the angular displacement of the baseball is 22.36 rad
Speed of light in water
Answer:
225,000 kilometers per second
Explanation:
Have a nice day
Una persona en la tierra tiene una masa de 70[kg]. Calcule: a) Su fuerza peso en la tierra. b) Su fuerza peso en la luna (considere que la aceleración gravitatoria en la luna es de 1.62 [m/s²]) *
Answer:
a. El peso = 686 Newton
b. El peso = 113.4 Newton
Explanation:
Dados los siguientes datos;
Masa = 70 kg
Aceleración debida a la gravedad en la luna = 1,62 m/s² una.
a. Para encontrar la fuerza-peso en la Tierra;
Sabemos que la aceleración debida a la gravedad es igual a 9,8 m/s² en el planeta Tierra.
El peso se puede definir como la fuerza que actúa sobre un cuerpo o un objeto como resultado de la gravedad.
Matemáticamente, el peso de un objeto viene dado por la fórmula;
[tex] Peso = mg [/tex]
Dónde;
m es la masa del objeto.
g es la aceleración debida a la gravedad.
Substituting into the formula, we have;
El peso = 70 * 9.8
El peso = 686 Newton
b. To find weight on moon;
Weight = mass * acceleration due to gravity on moon
Weight = 70 * 1.62
Weight = 113.4 Newton
Prepare a stock available at home following the procedure you learned in this lesson. Have a picture of the finished product and a narration on how you do it
Answer:
NO, 1. is stocks
2. is also stocks
bouquit GARNI IS NUMBER 3
NUMBER 4 IS ACID PRODUCTS
number 5 is brown stock
Explanation:
stocks are bones
Mỗi giây có 2,1.1018 ion+
2 và 1,8.1018
electron chạy qua tiết diện đèn ống.
Đường kính tiết diện của đèn ống là 2,0
cm. Mật độ dòng điện trung bình qua
đèn là bao nhiêu
A swift blow with the hand can break a pine board. As the hand hits the board, the kinetic energy of the hand is transformed into elastic potential energy of the bending board; if the board bends far enough, it breaks. Applying a force to the center of a particular pine board deflects the center of the board by a distance that increases in proportion to the force. Ultimately the board breaks at an applied force of 870 N and a deflection of 1.4 cm.
a. To break the board with a blow from the hand, how fast must the hand be moving? Use 0.50 kg for the mass of the hand.
b. If the hand is moving this fast and comes to rest in a distance of 1.2 cm, what is the average force on the hand?
Answer:
A. The hand must move with a velocity of 6.98 m/s to break the board.
B. Average force on the hand = 1025 N
Explanation:
A.To determine the speed the hand must move with to break the board, the force workdone in breaking the board is found first.
Workdone = force × distance
Minimum force required = 870 N;
Distance moved by board/Deflection in order to break = 1.4 cm = 0.014 M
Workd done = 870 N × 0.014 m = 12.18 Nm or 12.18 J
This work done = Kinetic energy of the hand
Kinetic energy = mv²/2 ; where m is mass and v is velocity
Mass of hand = 0.50 Kg, velocity = ?, K.E. = 12.18 J
v² = 2 KE/m
v = √2KE/m
v = √(2 × 12.18/0.50)
v = 6.98 m/s
Therefore, the hand must move with a velocity of 6.98 m/s to break the board.
B. Average force on the hand
This can be determined using the equation of motion, v² = u² + 2as to find acceleration, since force = mass × acceleration
From the equation of motion, a = v² - u²/2s
At rest, v = 0, u = 6.98, s = 1.2 cm = 0.012 m
a = 0² - 6.98²/ 2 × 0.012
a = -2030 m/s²
Force = 2030 m/s² × 0. 50 kg = 1015 N
Therefore, Average force on the hand = 1025 N
Two parallel conducting plates are separated by 10.0 cm, and one of them is taken to be at zero volts. (a) What is the electric field strength between them, if the potential 8.00 cm from the zero volt plate
Complete Question
Two parallel conducting plates are separated by 10.0 cm, and one of them is taken to be at zero volts. (a) What is the electric field strength between them, if the potential 8.00 cm from the zero volt plate(and 2.00 cm from the other) is 450 V?
Answer:
[tex]V'=562.5v[/tex]
Explanation:
From the question we are told that:
Separation distance [tex]d=10cm[/tex]
Voltage at 8cm [tex]V_8=450v[/tex]
Generally the equation for Voltage is mathematically given by
[tex]|V|=|E.d|[/tex]
Where
E=electric field
Therefore
At [tex]d=0.8[/tex]
[tex](450-0)V=E*(0.08m)[/tex]
[tex]E=\frac{450}{0.08}[/tex]
[tex]E=5625v/m[/tex]
Therefore
At [tex]d=10[/tex]
[tex]V'=Ed[/tex]
[tex]V'=5625*0.1m[/tex]
[tex]V'=562.5v[/tex]
QUESTION 24
2 point
A man travels 40 km eastwards, then 40 km to the south before finally travelling
10 km west. At the end of his journey the magnitude of his displacement is
While riding his bike through a neighborhood, Joe notices a red sign out of
the corner of his eye. He quickly comes to a stop. Which active reading
strategy is he using?
A. Asking questions
B. Making mental images
C. Summarizing
D. Using visual cues
SUBMIT
Answer:
B
Explanation:
because it take to the thought of a situation
Answer:
d i think
Explanation:
and are u using IXL???
define force and types of force
Answer:
Force is the strength or weight of things that depends on movement. The types of forces are conteact force, spring force, applied force, air resistance force, normal force, frictional force, tension force, and non-contact force.
what are parasites? Give some example
Answer:
parasites are creatures the gain benefit off of other animals usually harming them eg:ticks on dogs
equations of kinematics new dimensions
Answer:
Δx Displacement
t Time interval
v0 Initial velocity
v Final velocity
a Constant acceleration
Explanation:
I dont know if this helps because these are kinda like, examples... hope it helps tho :)
The formula to convert oF to oC =5/9( F -32)
A car of mass 500 kg is moving at a speed of 1.2 m/s. A man pushes the car,
increasing the speed to 2 m/s. How much work did the man do?
A. 640 J
B. 360 J
C. 1360 J
D. 1000 J
Work done by man will be A. 640 J
What is work energy theorem?
The work-energy theorem states that the net work done by the forces on an object equals the change in its kinetic energy.
according to work energy theorem
Work done = final Kinetic energy - initial kinetic energy
= KE (final) - KE (initial )
= 1/2 m ([tex]v^{2}[/tex]) - 1/2 m ([tex]u^{2}[/tex])
= 1/2 m ([tex]v^{2}[/tex] - [tex]u^{2}[/tex])
= 1/2 * 500 * ( [tex]2^{2}[/tex] - [tex]1.2^{2}[/tex])
= 250 * 2.56 = 640 J
correct answer is A. 640 J
learn more about work energy theorem
https://brainly.com/question/10063455?referrer=searchResults
#SPJ2
On a day when the speed of sound is 345 m/s, a 440 Hz tuning fork causes a tube closed at one end to vibrate in the second harmonic. How long is the tube?
Answer:
Length = 3.136 meters
Explanation:
Given the following data;
Speed = 345 m/s
Frequency = 440 Hz
To find how long is the tube;
First of all, we would determine the wavelength;
Wavelength = speed/frequency
Wavelength = 345/440
Wavelength = 0.784 m
Next, we would determine how long is the tube using the formula;
[tex] Length = \frac {2n - 1}{4} * wavelength [/tex]
Substituting into the formula, we have;
[tex] Length = \frac {2*1 - 1}{4} * 0.784 [/tex]
[tex] Length = \frac {2 - 1}{4} * 0.784 [/tex]
[tex] Length = \frac {1}{4} * 0.784 [/tex]
Length = 3.136 meters
Two stars that are in the same constellation:
Answer:
A binary star is a star system consisting of two stars orbiting around their common barycenter.
❣️(◍Jess bregoli◍)❣️#keep learning
You have been hired to design a spring-launched roller coaster that will carry two passengers per car. The car goes up a 13-m-high hill, then descends 20 m to the track's lowest point. You've determined that the spring can be compressed a maximum of 2.4 m and that a loaded car will have a maximum mass of 430 kg. For safety reasons, the spring constant should be 13 % larger than the minimum needed for the car to just make it over the top. Part A What spring constant should you specify
Answer:
22.15 N/m
Explanation:
As we know potential energy = m*g*h
Potential energy of spring = (1/2)kx^2
m*g*h = (1/2)kx^2
Substituting the given values, we get -
(400)*(9.8)*(10) = (0.5)*(k)*(2.0^2)
k = 39200/2.645
k = 19600 N/m
For safety reasons, this spring constant is increased by 13 % So the new spring constant is
k = 19600 * 1.13 = 22148 N/m = 22.15 N/m