Light of wavelength 200 nm is incident on a material and the stopping potential for ejected electrons is 2.2 V. The work function of the material is closest to:

When two identical resistors are connected to an ideal battery, the ratio of the total power dissipated in the parallel case to the series is 4:1.

When two identical resistors are connected to an ideal battery, the ratio of the total power dissipated in the parallel case to the series case can be found using the formulas for equivalent resistance and power.

In the parallel case, the equivalent resistance (Rp) is given by:
Rp = (R * R) / (R + R), where R is the resistance of each resistor.

In the series case, the equivalent resistance (Rs) is given by:
Rs = R + R

Next, we can calculate the power dissipated using the formula P = V² / R, where V is the voltage of the ideal battery.

Let Pp be the power dissipated in the parallel case and Ps be the power dissipated in the series case. We have:

Pp = V² / Rp
Ps = V² / Rs

Now, we can find the ratio of Pp to Ps:

(Pp / Ps) = (V² / Rp) / (V² / Rs)

Since V² is common in both terms, it cancels out, leaving us with:

(Pp / Ps) = Rs / Rp

Using our expressions for Rp and Rs, we get:

(Pp / Ps) = (2R) / (R/2)

This simplifies to:

(Pp / Ps) = 4

So the ratio of the total power dissipated by the two resistors in the parallel case to the series case is 4:1.

More on resistors: https://brainly.com/question/31317972

#SPJ11

The ratio of the maximum torque on the square loop to the maximum torque on the rectangular loop is 1:5.

The maximum torque on a current loop is given by the equation τ = NIABsinθ, where N is the number of turns, I is the current, A is the area of the loop, B is the magnetic field strength, and θ is the angle between the magnetic field and the plane of the loop.

Since both loops have the same current, number of turns, and magnetic field strength, we only need to consider the difference in their areas and angles.

The square loop has sides of length s, so its area is A = s^2. The rectangular loop has sides of length 5s and s, so its area is A = 5s^2.

Next, let's consider the angles between the magnetic field and the plane of the loops. For the square loop, this angle is always 45 degrees (since it's a square). For the rectangular loop, the angle varies depending on the orientation of the loop relative to the magnetic field. The maximum torque occurs when the loop is oriented with its longer sides perpendicular to the field, so the angle is 90 degrees.

Now we can plug in the values to find the ratios:

τ_square/τ_rectangular = (NIAsinθ_square) / (NIAsinθ_rectangular)
= (s^2)(sin45) / (5s^2)(sin90)
= 1/5

Therefore, the ratio of the maximum torque on the square loop to the maximum torque on the rectangular loop is 1:5.

Learn more about "torque": https://brainly.com/question/17512177

#SPJ11

The round window is a dampens fluid vibrations membrane that separates the middle ear from the inner ear in mammals. Its primary function is to dampen fluid vibrations in the inner ear. Option I

The inner ear is filled with fluid that is set into motion by sound waves that enter the ear through the ear canal. This motion of the fluid stimulates tiny hair cells in the inner ear, which send signals to the brain that are interpreted as sound. The round window is an essential component of this system because it allows the fluid to move freely, which ensures that the sound waves can be effectively transmitted to the hair cells.

Learn more about dampen fluid

https://brainly.com/question/28304717

#SPJ4

Estimate is about 1.000692 times the actual speed of light. Its fairly accurate. To find out how accurate your estimate was, simply replace E with your calculated value from problem 1 and calculate the accuracy.

To determine the accuracy of your estimate from problem 1, you will need to first know the value of the speed of light in a vacuum and the speed estimated by dimensional analysis. The speed of light in a vacuum is approximately 299,792,458 meters per second (m/s).

Let's assume that you have calculated an estimated speed of light (E) using dimensional analysis. To find the accuracy of your estimate, you can use the following formula:

Accuracy = (Estimated Speed by Dimensional Analysis) / (Physical Speed of Light in a Vacuum)

Plug in the values you have:

Accuracy = E / 299,792,458 m/s

For example, if your estimated speed of light (E) was 300,000,000 m/s, then the accuracy of your estimate would be:

Accuracy = 300,000,000 m/s / 299,792,458 m/s ≈ 1.000692

This means your estimate is about 1.000692 times the actual speed of light, which indicates a fairly accurate estimation.

To find out how accurate your estimate was, simply replace E with your calculated value from problem 1 and calculate the accuracy.

Learn more about speed of light here:

https://brainly.com/question/29264168

#SPJ11

The infrared portion of the electromagnetic spectrum helps planetary scientists measure surface temperatures.

The electromagnetic spectrum refers to the range of all types of electromagnetic radiation, from radio waves with low frequency and long wavelength to gamma rays with high frequency and short wavelength.

Surface temperature refers to the temperature of an object or material at its outermost layer, in contact with its surroundings.

The infrared portion of the electromagnetic spectrum helps planetary scientists measure surface temperatures. This is because infrared radiation is emitted by all objects with a temperature above absolute zero, and the amount and wavelength of the radiation emitted can be used to determine the temperature of the object or surface being observed. This is particularly useful for planetary scientists studying the surfaces of planets, moons, and asteroids, as it allows them to map temperature variations and identify features such as volcanic activity, impact craters, and more.

To know more about electromagnetic spectrum visit:

https://brainly.com/question/18704022

#SPJ11

We'll need to consider the Doppler Effect and how it affects the perception of an observer. The Doppler Effect refers to the change in frequency or wavelength of a wave in relation to an observer who is moving relative to the source of the wave.

Step 1: Identify the markings of both Empire and Federation ships.
Let's assume Empire ships have a specific wavelength marking "A" and Federation ships have a different wavelength marking "B."

Step 2: Calculate the relative speed required to cause the Doppler Effect.
We need to find the speed at which the Empire ship should travel so that its markings appear to have the wavelength of the Federation ship's markings.

To calculate this, we can use the following Doppler Effect equation for wavelengths:

Observed Wavelength (B) = Source Wavelength (A) * [tex][(1 + v/c)/(1 - v/c)]^{1/2}[/tex]

Here, "v" is the relative speed of the Empire ship, and "c" is the speed of light.

Step 3: Solve for "v."
Rearrange the equation and solve for "v" to find the required speed:

v = c * ([(B/A)² - 1]/[(B/A)²+ 1])

By substituting the values for "A" and "B" and solving for "v," you will obtain the speed an Empire ship has to travel relative to an observer for its markings to be confused with those of a Federation ship.

Learn more about Doppler effect here:

https://brainly.com/question/15318474

#SPJ11

Heat transfer rate through fins and fin effectiveness must be determined to justify their use in a system.

To determine the rate of heat transferred from a hot surface through each fin, it is necessary to consider the material properties of the fin, its geometry, and the flow characteristics of the medium in which it operates.

Additionally, the fin effectiveness must be evaluated to determine whether the use of fins is justified.

Fin effectiveness is a measure of how well a fin increases the heat transfer rate, and is influenced by factors such as the fin thickness, surface area, and spacing.

If the fin effectiveness is high enough, it justifies the use of fins as they increase the heat transfer rate and improve the system's efficiency.

For more such questions on Heat , click on:

https://brainly.com/question/934320

#SPJ11

The time elapsed on Earth will be approximately 874 years, which is roughly 8.7 centuries.

The time dilation formula given by the theory of relativity can be used to determine the time elapsed on Earth while a generational spaceship travels to the star cluster Pleiades and back.

According to the formula, the ratio of elapsed time on Earth to the spaceship's elapsed time is equal to the square root of 1 minus the ratio of the spaceship's speed to the speed of light, squared.

Since the spaceship travels at a constant speed, we can assume that its speed is half the distance traveled (i.e. 205 light years per trip) divided by the time elapsed on the spaceship (850 years). This gives a speed of approximately 0.241c, where c is the speed of light.

Plugging this into the time dilation formula yields a ratio of approximately 0.968. Therefore, the time elapsed on Earth will be approximately 874 years, which is roughly 8.7 centuries.

learn more about spaceship here:

https://brainly.com/question/30031772

#SPJ11

To calculate the height to which the projectile will rise, we can use the following equation:

h = (v^2)/(2g)

Where:
h = height
v = initial velocity (in this case, 10.4 km/s)
g = acceleration due to gravity at the Earth's surface (9.8 m/s^2)

First, we need to convert the initial velocity from km/s to m/s:

10.4 km/s = 10,400 m/s

Now we can plug in the values and solve for h:

h = (10,400 m/s)^2 / (2 x 9.8 m/s^2)
h = 5,387,755.1 meters

Therefore, the projectile will rise to a height of approximately 5,387,755.1 meters (or 5,387.8 km) above the Earth's surface.

To know more about projectile visit:

https://brainly.com/question/11422992

#SPJ11

A filament is a conductor with a resistance high enough to cause the conductor to heat and produce light.

Filaments are commonly found in incandescent light bulbs, which work by passing an electric current through a thin wire filament, causing it to heat up and emit light.

The filament is typically made of a metal such as tungsten, which has a high melting point and can withstand the high temperatures generated by the electric current.

As the filament heats up, it emits visible light as well as infrared radiation, which is absorbed by the bulb's glass envelope and causes it to heat up as well. The heat generated by the filament is what gives incandescent bulbs their warm glow and makes them a popular choice for lighting applications.

To learn more about conductor, click here:

https://brainly.com/question/18084972

#SPJ11

The uncertainty in the ball's horizontal momentum in a direction perpendicular to that in which it is being thrown is at least 1.05 x [tex]10^{-33}[/tex]kg m/s.

The uncertainty in the ball's horizontal momentum in a direction perpendicular to that in which it is being thrown can be estimated using the Heisenberg uncertainty principle. The principle states that the product of the uncertainty in position and the uncertainty in momentum is greater than or equal to Planck's constant divided by 2π:

Δx Δp ≥ h/2π

We can rearrange this equation to solve for the uncertainty in momentum:

Δp ≥ h/2πΔx

Since we are given that the ball is located within a cube with volume 1000 [tex]cm^3[/tex]at the time it is thrown, we can estimate the uncertainty in position in the horizontal direction perpendicular to the direction of the throw as follows:

Δx ≈ (V)^(1/3) = (1000 [tex]cm^3[/tex])[tex]^(1/3)[/tex]= 10 cm

where V is the volume of the cube.

Using the value of Planck's constant, h = 6.626 x [tex]10^{-34}[/tex] J s, we can calculate the minimum uncertainty in the ball's horizontal momentum in a direction perpendicular to the throw:

Δp ≥ (6.626 x [tex]10^{-34}[/tex]J s) / (2π x 10 cm)

Δp ≥ 1.05 x [tex]10^{-33}[/tex] kg m/s

Learn more about Heisenberg uncertainty principle here:

https://brainly.com/question/30325893

#SPJ11

Flute and piano sound different due to distinct timbres resulting from unique harmonic overtones and resonance.

Although a flute and a piano may both play a note with a fundamental frequency of 1138 Hz, they produce different sounds due to their unique timbres.

Timbre is the quality of a sound that distinguishes one instrument from another.

It is influenced by the harmonic overtones generated and the resonance within each instrument.

A flute, being a woodwind instrument, produces a pure and airy sound with fewer overtones, while a piano, a stringed and percussive instrument, generates richer harmonic overtones by striking strings with hammers.

These characteristics lead to the distinct sounds of a flute and a piano.

For more such questions on resonance, click on:

https://brainly.com/question/29298725

#SPJ11

It would take you approximately 1.54 years to make the trip to the star 65 light-years away at the speed that contracts the distance to 10 light-years.

A light-year is a unit of distance used in astronomy that measures the distance light travels in one year, which is about 5.88 trillion miles.

Distance is a measure of the amount of space between two objects, points, or locations, usually measured in units such as miles or kilometers.

To travel to a star 65 light-years away at a speed that makes the distance seem only 10 light-years, you are experiencing a length contraction due to traveling at a significant fraction of the speed of light. To calculate the time it would take to make the trip, you can use the formula:
Time = (Contracted Distance) / (Speed)
First, find the speed at which you are traveling by dividing the actual distance by the contracted distance:
Speed = 65 light-years / 10 light-years = 6.5c (where c is the speed of light)
Now, use the formula to find the time it would take:
Time = 10 light-years / 6.5c ≈ 1.54 years
It would take you approximately 1.54 years to make the trip to the star 65 light-years away at the speed that contracts the distance to 10 light-years

To know more about light years and distance visit:

https://brainly.com/question/31216106

#SPJ11

The induced emf in one of the windings is approximately 10.1 millivolts. Using Faraday's Law, which states that the induced emf is equal to the rate of change of magnetic flux.

In this case, the solenoid is the source of the changing magnetic field.
Assuming that the solenoid has N windings, and the magnetic flux through one winding is given by Φ, then the induced emf in one winding is:

[tex]emf=-Ndi/dt[/tex]
where the negative sign indicates that the induced emf opposes the change in magnetic flux.
Given that the current in the solenoid is decreasing at a rate of 40.0 A/s, we can use Ampere's Law to find the magnetic flux through one winding. Ampere's Law states that the magnetic field inside a solenoid is proportional to the current flowing through it:
[tex]B=UNI/L[/tex]
where μ is the permeability of free space, N is the number of windings, I is the current, and L is the length of the solenoid.
Assuming that the solenoid is long enough that the magnetic field is approximately uniform inside it, the magnetic flux through one winding is:
Φ = B * A
where A is the cross-sectional area of the solenoid.
Substituting the above equations into the expression for the induced emf, we get:
emf = -μ × A × I × N² / L × dI/dt
Plugging in the given values, we get:
emf = -(4π × 10⁻⁷ T·m/A) × π × (0.01 m)² ×(N=1)× (I=40 A)² / (0.1 m) ×(-40.0 A/s)
emf ≈ 10.1 mV

Learn more about solenoid here

https://brainly.com/question/9538203

#SPJ11

The mass of the particle having kinetic energy  48 MeV is found to be 53.16 MeV/c².

The relativistic kinetic energy (K) of a particle with momentum (p) and rest mass (m) is given by,

K = (γ - 1)mc², Lorentz factor is γ, γ = 1/√(1 - v²/c²) = E/(mc²), total energy of the particle is E, including rest mass energy.

We can solve for the rest mass (m) of the particle by rearranging the equation for γ,

γ = K/(mc²) + 1

γ² = 1/(1 - v²/c²)

= (K/(mc²) + 1)²

Simplifying and solving for v²/c²,

v²/c² = 1 - (mc²/K + 1)⁻²

Using the relationship between momentum and velocity,

p = mvγ

we can eliminate v to get,

p² = m²c²(K/(mc²) + 1)²

Simplifying and solving for m,

m = √(p²/c² - K²/c⁴)

Substituting the given values,

m = √((125 MeV/c)²/c² - (48 MeV)²/c⁴)

m ≈ 53.16 MeV/c²

Therefore, the mass of the particle is approximately 53.16 MeV/c².

To know more about kinetic energy, visit,

https://brainly.com/question/30465908

#SPJ4

The particle's mass is approximately 26.04 MeV/c².

The kinetic energy of a particle is the energy that it possesses due to its motion. This energy can be calculated using the formula KE = [tex]1/2mv^2[/tex], where m is the mass of the particle and v is its velocity. In this case, we are given that the kinetic energy of the particle is 48 MeV.

The momentum of a particle is defined as the product of its mass and velocity, p = mv. In this case, we are given that the momentum of the particle is 125 MeV/c.

To find the mass of the particle, we can use the following equation:

KE = [tex](p^2)/(2m)[/tex]

Substituting the given values, we get:

48 MeV = (125 MeV/c)² / (2m)

Simplifying this equation, we get:

m = (125 MeV/c)² / (2 x 48 MeV)

m = 26.04 MeV/c²

Therefore, the mass of the particle is 26.04 MeV/c².

To know more about mass, refer to the link below:

https://brainly.com/question/397900#

#SPJ11

False, or F.  it is incorrect to generalise about the MPC for a whole nation without further context and study.

The increase in consumer spending brought on by a rise in disposable income is quantified by the MPC (Marginal Propensity to Consume). The MPC for a country may be between 0 and 1, but it is not a given that it will be less than 1. In reality, the MPC can differ significantly amongst people and households even within a same nation, and it can also be influenced by a number of social and economic factors. As a result, it is incorrect to generalise about the MPC for a whole nation without further context and study.

learn more about MPC here:

https://brainly.com/question/14486062

#SPJ11

The magnetic flux cannot be negative, we can conclude that the initial magnetic flux going through the 992 loop coil was zero.

The initial magnetic flux going through a 992 loop coil can be calculated using Faraday's law of electromagnetic induction, which states that the induced electromotive force (EMF) in a closed loop is proportional to the rate of change of magnetic flux through the loop.
The EMF can be calculated using the formula:
[tex]EMF=-N(di/dt)[/tex]

EMF = -N(dΦ/dt).
where N is the number of turns in the loop coil, Φ is the magnetic flux through the coil, and dt is the time interval over which the magnetic flux changes.
Given that the induced EMF is -6.44 volts and the time interval over which the magnetic flux fades away is 84.45 seconds, we can calculate the rate of change of magnetic flux as:
(dΦ/dt) = -EMF/N = -(-6.44)/992 = 0.00649 Wb/s
Therefore, the initial magnetic flux can be calculated as:
Φ = Φ0 + (dΦ/dt) x t
where Φ0 is the initial magnetic flux, and t is the time interval.
Substituting the values, we get:
Φ0 = Φ - (dΦ/dt) x t = 0 - 0.00649 x 84.45 = -0.547 Wb

Learn more about magnetic flux here

https://brainly.com/question/31324455

#SPJ11

To find the magnitude of the angle subtended by the red blood cell, we can use the formula magnification = -fo/ feth red blood cell when viewed through this microscope is 11.26 degrees.

Focal length of the objective lens, fe is the focal length of the eyepiece lens, and the negative sign indicates that the image formed by the objective lens is inverted.The total magnification of the microscope is given by the product of the magnification of the objective lens and the magnification of the eyepiece lens.

To know more about microscope visit :

https://brainly.com/question/18661784

#SPJ11

The speed of light in the glass is approximately 1.94 × 10^8 m/s, which corresponds to option B.

The critical angle is the angle of incidence at which the angle of refraction is 90 degrees. We can use Snell's law to relate the angle of incidence and refraction to the speeds of light in air and the glass:
sin(39.0°) = (speed of light in air) / (speed of light in glass)
Rearranging this equation gives:
(speed of light in glass) = (speed of light in air) / sin(39.0°)
Plugging in the given value for the speed of light in air and solving for the speed of light in glass gives:
(speed of light in glass) = (3.00 × 10^8 m/s) / sin(39.0°)
Using a calculator, we find that the speed of light in glass is approximately 1.94 × 10^8 m/s. Therefore, the correct answer is B).
To find the speed of light in the glass, we need to determine its refractive index first. The critical angle can be used to calculate the refractive index using Snell's Law. For total internal reflection to occur, the light must pass from the glass to the air, so we can use the formula:
critical angle = arcsin(n2/n1)
where critical angle is 39.0°, n1 is the refractive index of the glass, and n2 is the refractive index of air (which is approximately 1).
39.0° = arcsin(1/n1)
Solving for n1, we get:
n1 = 1/sin(39.0°)
Now, we can find the speed of light in the glass using the formula:
v = c/n1
where v is the speed of light in the glass and c is the speed of light in a vacuum (3.00 × 10^8 m/s). Substituting the values, we get:
v = (3.00 × 10^8 m/s) / (1/sin(39.0°))
After calculating, we find that the speed of light in the glass is approximately 1.94 × 10^8 m/s, which corresponds to option B.

learn more about speed here

https://brainly.com/question/15062582

#SPJ11

Orbital speed and period are determined by the altitude and the mass of the celestial body being orbited.

However, in general, the orbital speed and period of a satellite increase with altitude. For example, a satellite in a circular orbit around Earth at an altitude of 200 kilometers has an orbital speed of approximately 7.9 kilometers per second and a period of approximately 90 minutes, while a satellite in a circular orbit around Earth at an altitude of 36,000 kilometers (geostationary orbit) has an orbital speed of approximately 3 kilometers per second and a period of approximately 24 hours.

Similarly, the orbital speed and period of a satellite around Jupiter or Earth's Moon would depend on the altitude of the satellite and the mass of the celestial body being orbited.

To learn more about Magellan satellite, here

https://brainly.com/question/935024

#SPJ1

A drum switch is a device that is used to reverse the direction of a motor, whereas a push-button operated manual motor starter is a device that starts and stops a motor.

The advantage of using a drum switch to reverse a motor is that it provides a more efficient and reliable way of reversing the motor's direction. This is because the drum switch is designed to handle the high current and voltage that are associated with reversing a motor.

Additionally, the drum switch allows for precise control over the direction of the motor, which is essential in many applications. On the other hand, a push-button operated manual motor starter may not be designed to handle the high current and voltage associated with reversing a motor,

may not provide the same level of control as a drum switch. Therefore, when it comes to reversing a motor, a drum switch is typically the preferred choice over a push-button operated manual motor starter.

To learn more about : motor starter

https://brainly.com/question/17144616

#SPJ11

The final speed of the file cabinet is approximately 8.21 m/s.

To find the final speed of the cabinet, we can use the principle of work-energy.

The work done on an object is equal to the change in its kinetic energy. In this case, the work done by the applied force is equal to the change in kinetic energy of the file cabinet.

The work done can be calculated using the formula:

Work = Force × Distance × cos(θ)

Where:

Force = 212 N (applied force)

Distance = 5.9 m (distance moved)

θ = 0 degrees (since the force and displacement are in the same direction, the angle between them is 0)

Therefore, Work = 212 N × 5.9 m × cos(0) = 1248.8 J (joules)

The work done is equal to the change in kinetic energy of the file cabinet.

Change in Kinetic Energy = Work

The initial kinetic energy of the file cabinet is zero since it starts from rest.

Change in Kinetic Energy = (1/2) × mass × final velocity^2 - 0

Therefore, (1/2) × mass × final velocity^2 = 1248.8 J

Substituting the given mass of the file cabinet as 37 kg:

(1/2) × 37 kg × final velocity^2 = 1248.8 J

Simplifying the equation:

18.5 × final velocity^2 = 1248.8 J

Dividing both sides by 18.5:

final velocity^2 = 67.45 m^2/s^2

Taking the square root of both sides:

final velocity = √(67.45 m^2/s^2)

final velocity ≈ 8.21 m/s

Therefore, the final speed of the file cabinet is about 8.21 m/s.

To learn more about velocity, refer below:

https://brainly.com/question/17127206

#SPJ11

The polarizing angle for sapphire is 59.52 degrees. The polarizing angle for a transparent material is defined as the angle of incidence at which the reflected light is completely polarized perpendicular to the plane of incidence.

At this angle, the reflected light is entirely polarized and no longer contains any unpolarized or partially polarized components.

The polarizing angle can be found using the equation:

tan θp = n

where θp is the polarizing angle and n is the refractive index of the material.

Since the critical angle for total internal reflection for sapphire surrounded by air is given as 34.40, we can use the formula for the refractive index in terms of the critical angle:

n = 1 / sin θc

where θc is the critical angle.

Substituting the given value, we get:

n = 1 / sin 34.40 = 1.671

Now we can use the equation for the polarizing angle:

tan θp = n

tan θp = 1.671

Taking the inverse tangent of both sides, we get:

θp = tan⁻¹ (1.671)

θp = 59.52 degrees

Therefore, the polarizing angle for sapphire is 59.52 degrees.

Learn more about “polarizing angle  “ visit here;

https://brainly.com/question/21134004

#SPJ4

The typical time for an air mass to pass over an area is a few days.

The amount of time it takes for an air mass to pass over a given area varies depending on the size and speed of the air mass.

On average, it takes a few days for an air mass to pass over a region.

However, some air masses can move more quickly or slowly, causing them to take less or more time to move through an area.

Factors such as temperature, humidity, and pressure can also affect the movement of air masses.

Overall, understanding the movement and behavior of air masses is crucial for predicting weather patterns and developing effective climate models.

For more such questions on mass, click on:

https://brainly.com/question/86444

#SPJ11

Answer:We can use the thin lens equation to relate the object distance, image distance, and focal length of the camera lens:

1/f = 1/d_o + 1/d_i

where f is the focal length of the lens, d_o is the distance between the lens and the object being photographed, and d_i is the distance between the lens and the image formed on the detector surface.

In this problem, the object distance is the distance between the camera and the landscape, which is 5.0 km, and the focal length of the lens is 0.40 m. We can solve for the image distance using the thin lens equation:

1/0.40 m = 1/(5.0 km) + 1/d_i

Solving for d_i, we get:

d_i = 0.391 m

So the distance between the lens and the image formed on the detector surface is 0.391 m.

To find the width of the image on the detector surface, we can use similar triangles. The ratio of the object width to the object distance is equal to the ratio of the image width to the image distance:

object width / object distance = image width / image distance

The object width is 2.0 km and the object distance is 5.0 km. The image distance is the distance between the lens and the image formed on the detector surface, which is 0.391 m. Solving for the image width, we get:

image width = (object width / object distance) * image distance

image width = (2.0 km / 5.0 km) * 0.391 m

image width = 0.1564 m

So the width of the image on the detector surface is approximately 0.16 m (to two significant figures).

Explanation:

When using a fireplace, the majority of the heated air is lost through the chimney. The given statement is true.

This is because the hot air rises and escapes through the chimney, taking with it the heat that was generated by the fire. In addition, the draft created by the chimney can draw in cool air from outside, further reducing the efficiency of the fireplace.

It is important to consider the efficiency of a fireplace when using it as a heating source. To minimize heat loss through the chimney, consider installing a fireplace insert or a stove that is designed to burn more efficiently. Additionally, make sure to close the damper when the fireplace is not in use to prevent drafts from cooling the room.

For more information on chimney kindly visit to

https://brainly.com/question/28328659

#SPJ11

The mass of the stuffed suitcase when you pull upward with a force of 150 N and it accelerates upward at 0.740 m/s² is approximately 202.7 kg. By using Newton's second law of motion, which states that force (F) equals mass (m) multiplied by acceleration (a): F = m × a.

Force (F) = 150 N
Acceleration (a) = 0.740 m/s²

Rearrange the formula to solve for mass (m):
m = F / a

Substitute the values into the formula:
m = 150 N / 0.740 m/s²

Calculate the mass:
m ≈ 202.7 kg

Newton's second law of motion states that the acceleration of an object is directly proportional to the net force applied to it and inversely proportional to its mass. In simpler terms, it means that the harder you push or pull an object, the faster it accelerates, and the heavier the object, the slower it accelerates.

To learn more about law of motion refer here:

https://brainly.com/question/29775827#

#SPJ11

By Ohm's law, The current in the wire is 75 mA.

To find the current in the wire, we can use Ohm's law which states that current is equal to voltage divided by resistance.

First, we need to calculate the resistance of the wire using the formula:

Resistance = (resistivity x length) / cross-sectional area

where resistivity is the inherent resistance of the material (in this case, gold), length is the length of the wire, and cross-sectional area is the area of the wire's cross-section.

The resistivity of gold is 2.44 x 10^-8 ohm-meters (source: Engineering Toolbox).

The length of the wire is given as 120 m.

The diameter of the wire is given as 0.200 mm, which means the radius is 0.100 mm or 0.0001 m.

The cross-sectional area of the wire can be calculated using the formula:

Cross-sectional area = pi x radius^2

Substituting the values we get:

Cross-sectional area = pi x (0.0001)^2 = 3.14 x 10^-8 m^2

Now we can calculate the resistance:

Resistance = (2.44 x 10^-8 ohm-meters x 120 m) / 3.14 x 10^-8 m^2 = 9.37 ohms

Using Ohm's law:

Current = 0.700 V / 9.37 ohms = 0.075 A or 75 mA (rounded to three significant figures)

Therefore, the current in the wire is 75 mA.

Learn more about Ohm's law

brainly.com/question/1247379

#SPJ11

The speed of the geosynchronous satellite is 7.9 x 10³ m/s.

Average radius of earth, R = 6.38 x 10⁶m

Acceleration of the satellite = g = 9.8 m/s²

A geosynchronous satellite is positioned in an orbit with an orbital period equal to that of the Earth's rotation. One rotation of the globe by these satellites takes 24 hours to complete.

The speed of the geosynchronous satellite orbiting at Earth radii above Earth's surface is given by,

v = √gR

v =√(9.8 x 6.38 x 10⁶)

v = 7.9 x 10³ m/s

To learn more about geosynchronous satellite, click:

https://brainly.com/question/13975214

#SPJ1

60 W on a system having 100 g, 20 cm, and 1 min as the fundamental units is equal to 75000 kg.m²/s³/min.

The watt is defined as the unit of power, which is the rate at which work is done or energy is transferred. In SI units, power is measured in watts (W), where 1 watt is equal to 1 joule per second (J/s).

We can express the watt in terms of the fundamental units of mass, length, and time as follows:

1 W = 1 J/s = 1 N.m/s = 1 kg.m²/s³

where N is the unit of force, and 1 N is defined as the force required to accelerate a mass of 1 kg at a rate of 1 m/s².

To express the watt in terms of the given fundamental units of 100 g, 20 cm, and 1 min, we need to convert these units to SI units and then substitute them into the equation above.

100 g = 0.1 kg (since 1 kg = 1000 g)

20 cm = 0.2 m (since 1 m = 100 cm)

1 min = 60 s

Substituting these values into the equation for the watt, we get:

1 W = 0.1 kg x (0.2 m)²/s³

Simplifying, we get:

1 W = 0.004 J/s³

Now we can find the value of 60 W in terms of the given fundamental units using dimensional analysis:

60 W = 60 J/s = (60 J/s) / (0.004 J/s³) x (0.1 kg) x (0.2 m)²

Simplifying, we get:

60 W = 75000 kg.m²/s³/min

To know more about fundamental units, here

brainly.com/question/18965108

#SPJ1

--The complete question is, Find the value of 60 W on a system of units having 100 g, 20 cm and 1 min as the fundamental units.--