Lesson Question: What is the effect of
pressure on the volume of a gas?
To answer this question, you used weight to
change the pressure of the gas and
measured the
resulting changes to the gas's volume.
COMPLETE
The amount of gas (in terms of moles, mass, and
molecules):

The fuel value of ethane, c2h6, in kilojoules per gram of ethane is calculated as  51.8789 KJ / gm.

The amount of energy generated by complete combustion of a particular mass of the fuel is known as fuel values.

As we know the fuel value of ethane = 1560 KJ / mole

Molar mass of ethane is 30.07 g mole-1

Fuel value kilojoules per gram of ethane is as;

Now, 30.07 gm of ethane have fuel value = 1560 KJ, then 1 gm have fuel value = 1560 KJ / mol  / 30.07 g / mole  = 51.8789 KJ/ g  

Thus, the fuel value of ethane in kilojoules per gram is   51.8789 KJ / gm

To know more about fuel value, refer

https://brainly.com/question/11477302

#SPJ4

Option b and d CH₄ and (ClF₄)⁻ species contain an inversion center.

If a molecule has an inversion center, it means that every atom will coincide exactly with the same atom on the opposite side and at an equal distance from the center when translated on a line through the molecule. An inversion centre is located in the building below.

A point that may or may not overlap with an atom serves as the indicator for inversion centres. In every system, there can only be one inversion centre, which is always found at the centre of the molecule. In the examples that follow, atoms are not positioned between the centres of inversion.

SeF₆ structure octahedral

(ClF₄)⁻ structure is square planar

InF₃ - triangular

CH₄ structure -tetrahedral

Inversion center occurs in linear, square planar and tetrahedral

So answer is CH₄ and (ClF₄)⁻

To know more about CH₄(methane) visit:

https://brainly.com/question/28136905

#SPJ4

According to the molecular geometry, XeF₂Br₂ is polar as the compound possesses dipole moment.

Molecular geometry can be defined as a three -dimensional arrangement of atoms which constitute the molecule.It includes parameters like bond length,bond angle and torsional angles.

It influences many properties of molecules like reactivity,polarity color,magnetism .The molecular geometry can be determined by various spectroscopic methods and diffraction methods , some of which are infrared,microwave and Raman spectroscopy.

They provide information about geometry by taking into considerations the vibrational and rotational absorbance of a substance.Neutron and electron diffraction techniques provide information about the distance between nuclei and electron density.

Learn more about molecular geometry,here:

https://brainly.com/question/28557524

#SPJ1

Answer:

In a solid, the atoms and molecules are closely bonded that they vibrate in place but don't move around. liquids: Definite volume but able to change shape by flowing. In a liquid, the atoms and molecules are loosely bonded. They move around but stay close together.

How about liquid Neon or Argon versus gas Neon or Argon? The gas takes up quite a bit more space than the liquid and has molecules bouncing all over the container. The liquid molecules stay towards the bottom but one or two do make it all the way to the top.

The arrangement of particles in a gas is why gases will expand to fill whatever space they occupy. Compared to solids and liquids, gases have the most kinetic energy and the weakest intermolecular interactions. If you continue adding heat, the particles will ionize.

Liquids have a bit more space in-between each molecule than solids. Liquid molecules also move a bit faster than solids, and they will simply flow past other molecules within the container.

hope that helps sorry about the mistake

Explanation:

Explanation: The rate law for a chemical reaction is an equation that relates the rate of the reaction to the concentrations of the reactants. To determine the rate law for a reaction, experiments are typically conducted with different initial concentrations of the reactants and the initial rate of the reaction is measured.

From the data provided, it appears that the reaction is of the form X + Y → C. And the concentration of X and Y are varied in three trials and the corresponding Initial rate is measured.

In the first trial, [X] = 0.01 M and [Y] = 0.015 M, and the initial rate of the reaction is 7.83x10-5 M/s.

In the second trial, [X] = 0.01 M and [Y] = 0.03 M, and the initial rate of the reaction is 3.13x104 M/s.

In the third trial, [X] = 0.02 M and [Y] = 0.015 M, and the initial rate of the reaction is 1.57x10 M/s.

Given the data, the rate law for this reaction is OR = KX²M. This is because when the concentration of X is doubled, the rate of the reaction is quadrupled, which is consistent with a rate law of the form OR = k[X]^2.

The percent of the SCN- present initially that have been converted to FeSCN2+ = (z/y)*100.

The percent of the SCN- present initially that have been converted to FeSCN2+ at equilibrium can be determined using the equilibrium constant (Kc) for the reaction.

Fe3+ + SCN- <=> FeSCN2+

The equilibrium constant (Kc) for the reaction is defined as:

Kc = [FeSCN2+]/[Fe3+][SCN-]

The value of Kc can be determined from the initial concentrations of reactants and products and the equilibrium concentrations of reactants and products.

Let's say that the initial concentration of Fe3+ is x, the initial concentration of SCN- is y and the equilibrium concentration of FeSCN2+ is z.

For the reaction to be at equilibrium, the rate of the forward reaction must be equal to the rate of the reverse reaction. So the [Fe3+][SCN-] = [FeSCN2+].

At equilibrium, the percent of the SCN- present initially that have been converted to FeSCN2+ is equal to the ratio of the equilibrium concentration of FeSCN2+ to the initial concentration of SCN- multiplied by 100.

The percent of the SCN- present initially that have been converted to FeSCN2+ = (z/y)*100

To know more about SCN visit: https://brainly.com/question/13564486

#SPJ4

The link between the reactant concentration and the reaction rate is known as the rate law in chemistry. Rate = K X, where K is the constant variable known as RATE CONSTANT, is the expression for the rate law.

How do you define reaction?

Resistance or disagreement to a source, influence, of movement is referred to as reaction, pronounced re-ak-shn. especially: a reaction to a particular treatment, circumstance, or stimulus; leaning toward a past and typically antiquated political or social system or policy.

Chemical Response: Chemical reactions are the processes by which a substance of substances change chemically to create a new substance or things with entirely new attributes. Different in terms of both product nature and identity.

To know more about reaction visit:

https://brainly.com/question/17924702

#SPJ4

C. X and Y are the set of points lies within plane I

A plane is a two-dimensional, flat surface that extends indefinitely. A plane is a two-dimensional analogue that can incorporate three dimensions of space, a line, and a point.

In the planar equation, enter the coordinates of the provided points and record the values in P1 and P2. Verify the obtained values' signs: They are on the same side of the plane if P1 and P2 have the same parity. P1 and P2 are located on the opposing sides of the plane if their parities differ.

Learn more about plane here:

brainly.com/question/17458011

#SPJ1

Which set of points lies within plane I.

A) T and Y

B) X and V

C) X and Y

D) U and V

Lewis structure of OCS (Carbon Disulfide):
The Lewis structure of OCS follows the octet rule and is drawn as follows:

                                                                                                                     
Atom           Formal Charges
C                    0
O                    +1
S                   -1

In the Lewis structure of OCS, the central atom (carbon) is surrounded by two oxygen atoms and two sulfur atoms, forming a tetrahedral shape. A single double bond is formed between the central atom and the two oxygen atoms, and a single single bond is formed between the central atom and the two sulfur atoms. All the atoms now have a total of 8 electrons each, which is the octet rule. The formal charges of all the atoms in the Lewis structure of OCS are shown above.

The molecule of OCS is drawn by placing the atoms on a grid and connecting them with bonds. The lone pairs of electrons are also shown in the diagram. The formal charges of all the atoms in the correct structure are also given in the diagram.

To know more about Lewis structure click-
https://brainly.com/question/20300458
#SPJ4

In the question, we require a liquid that can be heated & cooled quickly. Therefore, for this purpose, we need a liquid whose value of specific heat capacity is low, it will absorb less amount of heat to get the required change. Hence, option (B)- Low specific heat, is correct.

A heat engine is a system which converts heat into work by taking heat from the reservoir to carry out some work. There is a discharge of some heat to the sink. In this system, there will also be some waste in the form of heat. There are different types of heat engines and a Carnot engine has the maximum efficiency.

The specific heat capacity of any substance is defined as the amount of heat required by one gram of a substance to raise the temperature of that substance by 1 degree Celsius. In the question, we require a liquid that can be heated & cooled quickly, so for this purpose, we need a liquid whose value of specific heat capacity is low, As it will absorb less amount of heat to get the required change.

To know more about the Carnot engine, visit:

https://brainly.com/question/14680478

#SPJ1

Aggregate supply is the total quantity of output firms will produce and sell—in other words, the real GDP.

Given that wages and prices are less flexible in the short run, the Keynesian model demonstrates that the aggregate supply curve is upward sloping. This approach makes it more probable that the economy will not reach full employment, allowing businesses to expand their workforce and boost output without having to raise prices or pay.

The economy will be in balance when the aggregate expenditure line reaches the 45-degree line. It is the only location along the aggregate expenditure line where total spending on aggregate demand and total production are equal.

The quantity of finished goods and services delivered overall at various price points is represented by the aggregate supply (AS) curve. Because wages and other costs are sticky in the short term, it slopes upward.

To learn more about Keynesian refer to:

https://brainly.com/question/15016716

#SPJ4

The hypothesis is that these values are the fraction of atoms that are still radioactive after n half-life cycles. A= 0.5, B = 0.25 , C = 0.125, D = 0.015625 and E = 0.00390625.

The term half life of a substance is defined as the interval of time required for one-half of the atomic nuclei of a radioactive sample to decay.

"n" represents the number of half lives.

The amount of substance that remains after n half lives can be calculated using the given formula as follows:

So when we have n = 1,

Fraction of substance that remains = 0.5¹ = 0.5.

That means after first half life over, the amount of substance that remains is 0.5 times that of original.

Then, we have A = 0.5

When n = 2, we have 0.5² = 0.25

So, when 2 half lives are over, the amount of substance that remains is 0.25 times that of the original.

Then, B = 0.25

When n = 3, we have 0.5³ = 0.125

So when 3 half lives are over, the amount of substance that remains is 0.125 times that of the original.

Therefore, we have

C = 0.125

When n = 6 , we have

0.5⁶ = 0.015625

So D = 0.015625

When n = 8, we have 0.5⁸ = 0.00390625

Therefore, E = 0.00390625

Thus, the values for A, B, C, D and E are 0.5, 0.25, 0.125, 0.015625 and 0.00390625 respectively.

To learn more about the half life cycle, follow the link;

https://brainly.com/question/17017170

#SPJ1

Answer: A) Volume of a gas B) Number of molecules C) temperature &pressure

Explanation: The law also states that the Kelvin temperature and the volume will be in direct proportion when the pressure exerted on a sample of a dry gas is held constant.

Thus, our final H+ value is 5.35x10-7 M, and our pH value is 6.27. The reaction quotient value at chemical equilibrium is the equilibrium constant for a chemical process.

Q may be used to predict the direction of an equilibrium change in a reaction. If K > Q, a reaction will take place and convert reactants into products. In the event that K Q, the reaction will go the other way and turn reactants into products.

An equilibrium constant can only be altered by a change in temperature. If you alter the pressure, the equilibrium position could vary. Le Chatelier's Principle states that the equilibrium position shifts in a way that tends to

1).  0.25 M H3PO4 ==> H+ + H2PO4-

Ka = 7.5x10-3 = [H+][H2PO4-] / [H3PO4]

7.5x10-3 = (x)(x) / 0.25 - x

x2 + 7.5x10-3x - 1.875x10-3 = 0

x = [H+] = 0.0397 M

pH = -log 0.0397

pH = 1.40

2). 0.450 M HPO42- ==> H+  +  PO43-  (use Ka3 for this problem)

Ka3 = 4.2x10-13 = [H+][PO43-] / [HPO42-]

x2 = 1.89x10-13

x = [H+] = 4.35x10-7 M

pH = -log 4.35x10-7

pH = 6.36

To know more about equilibrium constants visit:

https://brainly.com/question/10038290

#SPJ4

The Grignard reaction is crucial to the creation of a carbon-carbon bond and is one of the reactions that results in this bond.

Grignard compounds, also known as Grignard reagents, are chemical compounds with the general equation RMgX, where X is a halogen and R is a natural group, usually an alkyl or aryl. Examples of typical compounds are methylmagnesium chloride (CH 3), phenylmagnesium bromide (C 6H 5)-MgBr, and others.

Grignard reagents react rapidly with acidic hydrogen atoms found in compounds such as alcohols and water. A Grignard reagent reacts with water to form an alkane when a proton replaces the halogen in the reaction. Thus, a two-step process for converting a haloalkane into an alkane is provided by the Grignard reagent.

In the procedure, Grignard reagents, also known as alkyl or aryl magnesium bromides, are employed.

2-Methyl-2-Butanol is created in reaction to the event.

To learn more about Grignard reaction refer to:

https://brainly.com/question/23971610

#SPJ4

Option B. best explains why chemical compound a is much more stable than compound b where a has aromatic resonance structure and b has antiaromatic.

A chemical compound is a substance made up of two or more different elements that are chemically bonded together in a fixed ratio. The elements in a chemical compound are combined through chemical reactions, and the properties of a chemical compound are different from the properties of the individual elements that make it up. Chemical compounds can be classified as inorganic or organic, with organic compounds containing carbon and hydrogen atoms, and inorganic compounds not containing these atoms. Chemical compounds can be further classified based on their chemical properties, such as acids and bases, and can be identified and studied using chemical analysis techniques such as spectroscopy, chromatography and X-ray crystallography.

Learn more about chemical compound here:

https://brainly.com/question/26487468

#SPJ4

When 2-methyl-2-butanol undergoes dehydration, then one product is : A.) 2-methyl-2-butene.

Dehydration of 2-methyl-2-butanol forms major (2-methyl-2-butene) and minor (2-methyl-1-butene) organic product. Acid-catalyzed dehydration of either 2 -methyl-1-butanol or 3 -methyl-1-butanol gives 2-methyl-2-butene as major product. 2-methyl -2-butanol is a branched pentanol and it has been used an anesthetic and more recently used as recreational drug. It is mostly a positive allosteric modulator for GABAA receptors.

In Dehydration reactions of alcohols to alkenes, 2-methyl-2-butanol may give rise to two possible alkenes that are 2-methyl-1-butene or 2-methyl-2-butene. Dehydration of 2-methyl-2-butanol follow Zaitsev's rule, which states that more substituted alkene will be formed. In this experiment 2-methyl-2-butanol is dehydrated to form both 2-methyl-2-butene and 2-methyl-1-butene.

To know more about 2-methyl-2-butanol, refer

https://brainly.com/question/8436753

#SPJ4

The oxidation level in the first set from row 1 to row 5 is 4 , 1 ,1,2,1 and in the second set is 3,1,1,1,2. the compounds which  have the same oxidation level as the compound in row 1 in first set is 3 and in second set is none.

Hence, oxidation level of row 1 of first set is 4 with two electronegative O and one electronegative Nalong with an unsaturation. Also row 3 of the first set has oxidation level 4(two unsaturation and two 0) Similarly, oxidation level of row 1 of second set is 3. No other compounds in second set has oxidation level 3, hence first set - 3 and second set - none. The oxidation level of a compound is determined by the number of electronegative elements and unsaturations in the compound. The more number of electronegative elements there are, more is the oxidation level as we know that oxidation is the process of removal of electron or addition of electronegative elements like O and N. Also, the reverse reduction is defined as H being added to the compound. For example, in acetic acid, there are two O atoms and a C=O unsaturation. Hence, the oxidation level is 3. Similarly, in ethene, there is only one unsaturation. Hence, oxidation number is 1.

learn more about compounds here:

https://brainly.com/question/3648919

#SPJ4

the complete question is :

Which of the following compounds have the same oxidation level as the compound in row 1? (Enter your answer in numerical order as the row number(s) separated by commas, i.e. 2, 3, 5. If none of the compounds have the same oxidation level, write 'none'.)

The number of moles of heptane that is required to prepare 1M solution in 250ml is 0.250 moles.

The number of moles of a solution can be calculated by multiplying the molarity of the solution by the volume as follows;

Molarity = no of moles ÷ volume

According to this question, a solution of heptane is to be prepared by 1M solution in 250ml. The number of moles involved is as follows:

no of moles = 0.250 × 1

no of moles = 0.250moles

Therefore, 0.250 moles is the number of moles required to produce the heptane solution.

Learn more about molarity at: https://brainly.com/question/29884686

#SPJ1

The mass of 3.40 x 10^35 formula units of KCL is 4.20 * 10^13.

The empirical formula of an ionic or covalent network solid compound that is used as a separate entity for stoichiometric calculations is known as a formula unit in chemistry. It is also the ionic compound with the lowest whole number ratio of ions.

As we know,1 mole = 6.02 x 1023 molecules.

1 = (1 mole)/(6.02x1023 molecules)

So, (3.40x10^35 molecules KCL)*(1 mole KCL)/(6.02x1023 molecules KCL)

5.647 *10^11 moles Na2SO4

Molar mass of KCL = 74.55 g/mol

Mass of KCL will be =  5.647 *10^11  * 74.55

Hence, mass of KCL = 4.20 * 10^13

To know more about formula unit, refer

brainly.com/question/24712181

#SPJ1

There many moles of water are in one gram, 0.055508435061792 is the solution. We'll presume you're converting between grams and moles of water. On each measuring unit, you may access more information.

Use the grams to moles formula to calculate the number of moles, n, of a material with a given mass, m, (in grams) accurately. n = m / M, where M is the substance's molar mass

Multiply the substance's molecular weight by the quantity of moles. The substance's molecular weight, which is the number of grams per mole, serves as a conversion factor for moles to grams.

To know more about Moles visit:

https://brainly.in/question/607414

#SPJ1

The graphic depicts the structure of 3-methyl-3-propyl-2-heptanone.

The three-dimensional arrangement of the atoms that make up a molecule is known as molecular geometry. It contains the molecule's overall form as well as bond lengths, bond angles, torsional angles, and any other geometrical characteristics that dictate each atom's location. The molecular structure, as the name implies, is the three-dimensional form or arrangement of a molecule. By studying the molecular structural definition of a molecule or collection of atoms, one may learn about a variety of properties. For example, the methane molecule, CH4, which is the main component of natural gas, contains four electron bonding pairs around the core carbon atom; the electron-pair geometry, like the molecular structure, is tetrahedral.

Here,

The diagram of the structure of 3-methyl-3-propyl-2-heptanone is in the image.

To know more about molecular structure,

https://brainly.com/question/503958

#SPJ4

Answer:

sure what is the question

When a molecule or ion is chiral, all of the substituents connected to the carbon should be distinct and the molecule or ion can be superimposed on its mirror counterpart. Here, there are six chiral carbons, each with a unique substituent attached.

The stereocenter prevents the structure from being overlaid on its mirror counterpart by holding a group of atoms (ligands) in space. For instance, the serine molecule's core carbon is chiral. Hydrogen and the amino group are able to revolve around carbon.

There are four distinct groups that are bound to six separate chiral centers. Note: Stereogenic centers are another name for chiral centers. when an achiral carbon's mirror image is turned.

learn more about chiral center(s)

https://brainly.com/question/9522537

#SPJ4

when the sum of financing sources for education expenses is different than the sum of expenses for education expenses.

Education is a deliberate process with certain goals in mind, such as the transmission of knowledge or the development of abilities and moral qualities. The growth of comprehension, reason, kindness, and honesty are a few examples of these objectives. In order to discern between education and indoctrination, various researchers emphasize the importance of critical thinking. Some theorists demand that education leads to the improvement of the learner, while others favor a definition of the term that is value-neutral. Education can also refer to the mental states and dispositions that educated people possess, rather than the process itself, in a somewhat different sense. Transmission of cultural heritage from one generation to the next was the original purpose of education. Today's educational objectives increasingly take new concepts, including the liberation of learners, into account.

Learn more about Education here:

https://brainly.com/question/25717625

#SPJ4

The arrangement of hydrogen bonds during freezing is what causes water to have a lower density when it solidifies: the water molecules are pushed together.

Why is density important?

The density of a place refers to the quantity of things—which may include people, animals, animals, or objects—there are in it. Multiply the number of items even by area's measurement to determine density. A country's population density is calculated by dividing its total population by its area, expressed in square kilometers or miles.

What is a density unit?

However, kg/m3 is used as the standard SI unit for density. As seen below (t/m3-metric ton per cubic meter), density can be expressed in units of liters or metric tons. It stands for grams per milliliter. kilograms per liter, or kg/L.

To know more about density visit:

https://brainly.com/question/29775886

#SPJ1

The lone pair on the indicated N atom resides in a type of sp2 hybridized orbital.

In sp2 hybridization, three orbitals of an atom (typically s, px, and py) are mixed together to form three hybridized orbitals that are oriented in a trigonal planar arrangement. The fourth unhybridized orbital (pz) remains unchanged and can hold a lone pair of electrons.In sp3 hybridization, four orbitals of an atom (typically s, px, py, and pz) are mixed together to form four hybridized orbitals that are oriented in a tetrahedral arrangement. In sp hybridization, two orbitals of an atom (typically s, and p) are mixed together to form two hybridized orbitals that are oriented in a linear arrangement.

Learn more about hybridization here:

https://brainly.com/question/17012569

#SPJ4

The complete question is:

In what type of orbital does the lone pair on the indicated N atom reside? O p

O sp O sp2

O sp3

The reasons why gases deviate from ideal behavior at extremes of pressure and temperature are shown below:

All of these options are correct and are the reasons why gases deviate from ideal behavior at extremes of pressure and temperature.

To know more about Intermolecular forces,

https://brainly.com/question/12243368

#SPJ4

To determine how many mL of 1.5 M HCl solution should be used to provide 19.1 grams of HCl, we can use the following formula:

Molarity = moles of solute / liters of solution

We know the molarity of the solution (1.5 M) and the number of moles of HCl needed (19.1 grams / molar mass of HCl). Therefore, we can solve for the number of liters of solution needed:

19.1 grams HCl / (1.5 M) x (1 mole HCl / 36.5 g) = 0.5205 liters of solution

To convert liters to milliliters, we multiply by 1000:

0.5205 liters x 1000 mL/liter = 520.5 mL

Therefore, you should use 520.5 mL of 1.5 M HCl solution to provide the 19.1 grams of HCl required for the reaction.

The molarity of a solution containing 8.00 grams of magnesium nitrate in 500.00mL of water is 0.108M.

Molarity is the concentration of a substance in solution, expressed as the number moles of solute per litre of solution.

The molarity of a solution is determined by dividing the number of moles in the solution by the volume as follows:

Molarity = no of moles ÷ volume

According to this question, 8 grams of magnesium nitrate solution is dissolved in 500mL of water. The number of moles of the magnesium nitrate is as follows;

no of moles = 8g ÷ 148.3 g/mol

moles = 0.054 mol

molarity = 0.054mol ÷ 0.5 = 0.108M

Therefore, 0.108M is the molarity of the solution.

Learn more about molarity at: https://brainly.com/question/30216315

#SPJ1