It is against the law for keystroke loggers to be deposited on your hard drive by the company you work for.

The horizontal center of mass will be located at the horizontal center of mass will be located on the center line. This is further explained below.

Generally, a location or place that is inhabited, open for occupation or distinguished by some distinctive feature: situation The setting of the property contributes significantly to its overall allure.

In conclusion, The center line will serve as the location for the horizontal center of mass, which will be found at the same location as the center line.

Read more about Location

https://brainly.com/question/11718756

#SPJ1

2023 Murano's available intelligent awd adjusts the Torque delivered to the wheels to help maintain cornering control.

The torque from the engine is known to be that tool that moves a car. A lot of torque can be transferred to the wheels in first gear and it is better than in fifth gear.

Hence, 2023 Murano's available intelligent awd adjusts the Torque delivered to the wheels to help maintain cornering control.

Learn more about cornering control from

https://brainly.com/question/17371984

#SPJ1

Netmask:

The netmask is calculated by putting the number of 1’s equal to the given mask value (here 22).

Netmask = 11111111.11111111.11111100.00000000

= 255.255.252.0

Therefore, the netmask is equal to 255.255.252.0

Network Address:

The network address is obtained by performing the AND operation of the bits in the given IP address with the bits of the netmask.

IP address (153.10.22.56) = 10011001.00001010.00010110.00111000

Netmask (255.255.252.0) = 11111111.11111111.11111100.00000000

Network address = 10011001.00001010.00010100.00000000

= 153.10.20.0

Therefore, the network address is equal to 153.10.20.0

Host Mask:

The remaining or the unused bits in the netmask are used as the host mask. In other words, the host mask is obtained by complementing each bit of the netmask.

Netmask = 11111111.11111111.11111100.00000000

Host mask = 00000000.00000000.00000011.11111111

= 0.0.3.255

Therefore, the host mask is equal to 0.0.3.255

Broadcast address:

The broadcast address is used to send the packages to all the hosts in the network. It is obtained by setting all the bits after the network address to 1.

Network address (153.10.20.0) = 10011001.00001010.00010100.00000000

Broad cast address = 10011001.00001010.00010111.11111111

= 153.10.23.255

Therefore, the broadcast address is equal to 153.10.23.255

The number of possible hosts:

The number of possible hosts is computed as follows:

Possible hosts = 2n, where n is the number of host bits.

Out of the above 2n hosts, 2 are reserved and hence the number of usable hosts is equal to 2n – 2.

Number of hosts = 210 – 2 = 1024 – 2 = 1022

Host number:

Host number is the decimal equivalent of the host bits in the IP address.

Ip address (153.10.22.56) = 10011001.00001010.00010110.00111000

Host bits = 10.00111000

Host number = 29 + 0 + 0 + 0 + 25 + 24 + 23 + 0 + 0 + 0

= 512 + 32 +16 + 8

= 568

Hence, the host number is equal to 568.

See more abou computing at: brainly.com/question/14971369

#SPJ1

I agree with the programmers who think object-oriented programming is a superior approach to procedural programming.

In terms of Security, Object-oriented programming is said to have more of a secure based than procedural programming, due to the level of abstraction or that is due to data hiding property.

Note that  It hinders the access of data to any member functions of the same class and one cannot see a thing like that such as data hiding in the procedural programming framework.

Learn more about object-oriented programming  from

https://brainly.com/question/12342989

#SPJ1

A piece of rigging hardware used to couple the end of a wire rope to eye fittings, hooks, or other connections is a(n) hitch.

This is referred to as the physical components of a computer or electronic system and can be seen or felt and examples include keyboard, mouse etc.

The hitch is a rigging hardware which consists of a shank and ball platform used for various types of function such as coupling the end of a wire rope to eye fittings , towing etc. This therefore ensures they are well attached and less likely to remove or fall off thereby makes it the most appropriate choice.

Read more about Hitch here https://brainly.com/question/4351358

#SPJ1

In using SFTP to share files, the encryption in addition to the authentication information is seen in the user's email address.

Authentication Information is known to be that which tells about the usernames, passwords, electronic certificates, etc., that a one can use to know or be assured of a User's true identity.

Note that In using SFTP to share files, the encryption in addition to the authentication information is seen in the user's email address.

Learn more about email address from

https://brainly.com/question/24688558

#SPJ1

Answer:

The small size of the transistor, its greater reliability, and its relatively low power consumption made it vastly superior to the tube.

The factor that is important in simplifying assumption that goes into our calculations is:

The Hubble time is  known to be a form of an estimate that is given to the age of the universe and it is one that is often based on the Hubble constant.

Note therefore, The factor that is important in simplifying assumption that goes into our calculations is:

See full question below

When we determine the age of the universe using the Hubble Time (1/H0), what important simplifying assumption goes into our calculations?

a. that the expansion of the universe has been happening at the same rate - neither speeding up or slowing down

b. that all the galaxies are moving away from us at exactly the same speed, no matter how far away they are

c. that the cosmological principle doesn't hold: the universe is not isotropic and homogeneous

d. that we have accounted correctly for the effects of dark energy e. that the universe is actually contracting instead of expanding

Learn more about assumption from

https://brainly.com/question/2875871

#SPJ1

Answer:

Step 1:

OSI stands for Open Systems Interconnection.

OSI model was developed by the International Organization for Standardization(ISO). It is a reference model for how applications communicate over a network. The OSI model characterizes computing functions into a universal set of rules and requirements in order to support interoperability between different products and software.

The OSI model can be considered as a universal language for computer networking. It is based on the concept of divide and conquers, it splits up the communication system into 7 abstract layers, and the layer is stacked upon the previous layer.

Layers of OSI Model:

OSI model has seven layers which are as follows:

Step 2

Routers – A router is a device like a switch that routes data packets based on their IP addresses. Router is mainly a Network Layer device. Routers normally connect LANs and WANs together and have a dynamically updating routing table based on which they make decisions on routing the data packets. Router divide broadcast domains of hosts connected through it.

Gateway – A gateway, as the name suggests, is a passage to connect two networks together that may work upon different networking models. They basically work as the messenger agents that take data from one system, interpret it, and transfer it to another system. Gateways are also called protocol converters and can operate at any network layer. Gateways are generally more complex than switch or router.

Switch – A switch is a multiport bridge with a buffer and a design that can boost its efficiency(a large number of ports imply less traffic) and performance. A switch is a data link layer device. The switch can perform error checking before forwarding data, that makes it very efficient as it does not forward packets that have errors and forward good packets selectively to correct port only. In other words, switch divides collision domain of hosts, but broadcast domain remains same.

Which device will be used if you face an issue of weak signals during transmission.

Router device will be useful mostly for issue of weak signals during transmissin.

Mention on which level of OSI model these devices will work efficiently.

All these three devices router, gateway and switch work efficiently at hardware layers such as physical layer, datalink layer and network layer.

Step 3

Transmission impairment:

In the data communication system, analog and digital signals go through the transmission medium. Transmission media are not ideal. There are some imperfections in transmission mediums. So, the signals sent through the transmission medium are also not perfect. This imperfection cause signal impairment.

It means that signals that are transmitted at the beginning of the medium are not the same as the signals that are received at the end of the medium that is what is sent is not what is received. These impairments tend to deteriorate the quality of analog and digital signals.

There are three main causes of impairment are,

Attenuation

Distortion

Noise

1.Attenuation:

Here attenuation Means loss of energy that is the weaker signal. Whenever a signal transmitted through a medium it loses its energy, so that it can overcome by the resistance of the medium.

That is why a wire carrying electrical signals gets warm, if not hot, after a while. Some of the electrical energy is converted to heat in the signal.

Amplifiers are used to amplify the signals to compensate for this loss.

2.Distortion:

If a signal changes its form or shape, it is referred to as distortion. Signals made up of different frequencies are composite signals. Distortion occurs in these composite signals.

Each component of frequency has its propagation speed traveling through a medium and therefore, different components have different delay in arriving at the final destination.

It means that signals have different phases at the receiver than they did at the source.

3. Noise:

Noise is another problem. There are some random or unwanted signals mix up with the original signal is called noise. Noises can corrupt the signals in many ways along with the distortion introduced by the transmission media.

Noise may be divided into four categories:

The data protection process  that provides prebuilt capabilities, mapped to specific regulations, to create the necessary resources to implement and demonstrate compliance with these regulations is known as The European Union General Data Protection Regulation (GDPR).

Employers are known to be people who must be held accountable for data processing works while also working and complying with data protection principles.

The General Data Protection Regulation (GDPR) is known to be one of the hardest privacy and security law in the globe as it is known to be a body that imposes obligations onto its firm anywhere.

Hence, The data protection process  that provides prebuilt capabilities, mapped to specific regulations, to create the necessary resources to implement and demonstrate compliance with these regulations is known as The European Union General Data Protection Regulation (GDPR).

Learn more about data protection  from

https://brainly.com/question/27113550

#SPJ1

The Windows Recovery Environment (Windows RE or WinRE) can be used to repair common causes of unbootable operating systems. It is based on the Windows Preinstallation Environment (Windows PE).

The use of the Windows Recovery Environment (WinRE) is known to be a kind of tools that is often used in the recovery environment that is said to often helps in the repair of the common issues of unbootable operating systems.

Hence, The Windows Recovery Environment (Windows RE or WinRE) can be used to repair common causes of unbootable operating systems. It is based on the Windows Preinstallation Environment (Windows PE).

Learn more about operating systems from

https://brainly.com/question/22811693

#SPJ1

Answer:

True

Explanation:

You can set variables and make method functions.

Answer:

search

Explanation:

A search engine is a type of software that is used to carry out web searches. It works by "crawling" through the World Wide Web one web page at a time and indexing the pages.

The hacker's goal is to infiltrate the system by making their victims see reasons or believe that they will help them to handle or resolve their specific problems.

“Spear phishing” is known to be a form of phishing goal that is said to often targets a particular person or group and it is one that do include information that is well known to be of interest to the target.

Note that the hacker's goal is to infiltrate the system by making their victims see reasons or believe that they will help them to handle or resolve their specific problems.

Learn more about Spear phishing from

https://brainly.com/question/13202003

#SPJ1

Answer:

Program:

Module Module1

Function Days(intYears As Integer, intMonths As Integer, intWeeks As Integer) As Integer

' 1 year = 365days

' 1 month=30.417 days

' 1 week = 7 days

Days = 365 * intYears + 30.417 * intMonths + 7 * intWeeks

End Function

Sub Main()

Dim years, months, weeks As Integer

Console.Write("Enter the number of years: ")

years = Convert.ToInt32(Console.ReadLine())

Console.Write("Enter the number of months: ")

months = Convert.ToInt32(Console.ReadLine())

Console.Write("Enter the number of weeks: ")

weeks = Convert.ToInt32(Console.ReadLine())

Console.WriteLine("Days: " & Days(years, months, weeks))

Console.ReadKey()

End Sub

End Module

If an algorithm created to help make hiring decisions is based on previous unfair decisions, then the algorithm may be flawed.

Algorithms are known to be tools that are made to help in calculation, data processing, and a kind of automated reasoning.

Hence, If an algorithm created to help make hiring decisions is based on previous unfair decisions, then the algorithm may be flawed.

Learn more about algorithm from

https://brainly.com/question/23282908

#SPJ1

Answer:

biased

Explanation:

If the nurse assesses the heart sounds of a 77-year-old client is one that has chronic heart failure, the heart sound that the nurse document is known as S3 extra heart sound.

The term Third Heart Sound S3 is known to be the outcome or the result obtained from increased atrial pressure that brought about an increased flow rates, and this is one that is often seen in congestive heart failure.

Note that it is one that is said to be the most common cause of a S3 and it is links dilated cardiomyopathy with that of dilated ventricles and it is one that also adds to the sound.

Hence, If the nurse assesses the heart sounds of a 77-year-old client is one that has chronic heart failure, the heart sound that the nurse document is known as S3 extra heart sound.

Learn more about chronic heart failure from

https://brainly.com/question/934133

#SPJ1

The cloud service type that the developer choose to use is known to be PaaS.

Platform as a service (PaaS) is known to be a full development and deployment environment that is seen in the cloud, and it is made up of resources that helps users to deliver a lot of things from simple cloud-based apps to strong, cloud-enabled firm's applications.

Hence, in the case above, The cloud service type that the developer choose to use is known to be PaaS.

Learn more about PaaS from

https://brainly.com/question/20600180

#SPJ1

Answer:

it's called the prompt, mean yeah

In the case above, the command-line tool should he use to stop the application based on its process id is e option

What is the use of ps command?

The ps command is known to be one that helps enables a person to be able to look at the status of any kind of active processes on a system, and also that of display technical information in regards to the processes.

Note that In the case above, the command-line tool should he use to stop the application based on its process id is e option

Learn more about command-line tool from

https://brainly.com/question/3737699

#SPJ1

Answer:

import java.util.*;

import java.util.Arrays;

public class LabProgram

{

// called function

public static int[] removeEvens(int [] nums)

{

// calculates the length of array

int len = nums.length;

int j=0;

// loop to keep count how many odd are there in array

for(int i=0;i<len;i++)

{

// condition for odd

if(nums[i]%2!=0)

{

// keeps count of odd

j++;

}

}

// declaration of array for odd nums

int newarray[] = new int[j];

j = 0;

// loop

for(int i=0;i<len;i++)

{

// condition for odd

if(nums[i]%2!=0)

{

// assigning odd number to new array

newarray[j] = nums[i];

// increment of j

j++;

}

}

// returning new array

return newarray;

}

// main program

public static void main(String[] args)

{

// array declaration

int [] input = {1,2,3,4,5,6,7,8,9};

// calling a function, passing the paramtere

int [] result = removeEvens(input);

//

System.out.println(Arrays.toString(result));

}

}

Explanation:

Abstractions in a BNF description that can have two or more distinct definitions, representing two or more possible syntactic forms in the language and this is known to be  Nonterminal symbols.

Nonterminal symbols are known to be a kind of symbols that one can be able to replaced.

Note that they are often called simply syntactic variables and as such,  Abstractions in a BNF description that can have two or more distinct definitions, representing two or more possible syntactic forms in the language and this is known to be  Nonterminal symbols.

Learn more about Abstractions from

https://brainly.com/question/7994244

#SPJ1

The <script> tag allows a web page to include interactive content, which the browser assumes to be javascript unless indicated otherwise.

The <script> tag is known to be a tool that is often employed or used in regards of or to embed a client-side script (JavaScript).

Hence, The <script> tag allows a web page to include interactive content, which the browser assumes to be javascript unless indicated otherwise.

Learn more about tags from

https://brainly.com/question/13153211

#SPJ1

Answer:

it's called an overflow

Answer:

void print2(int row) {

for (int i = 0; i < row; i++) {

 char ch = 'a';

 char print = ch;

 for (int j = 0; j <= i; j++) {

  cout << print++;

 }

 cout << endl;

}

}

int count_digits(int num) {

int count = 0;

int temp = num;

while (temp != 0) {

 temp = temp / 10;

 count++;

}

return (num % count);

}

Explanation:

The Excel formula to enter in cell H5 using the relative style of cell referencing is = F5/F12

Excel formulas are expressions or equations used alongside Excel functions to perform arithmetic and logical formulas for computation.

From the question, we understand that we are to make use of the relative style of referencing

This means that we make use of the cell name as it is, without adding the  "$" sign, as it is in absolute style of cell referencing and mixed style of cell referencing

So, we make use of cell F5 as F5 and we make use of cell F12 as F12

The value in cell F5 divided by cell F12 using relative cell references is represented as:

F5 divided by F12

Rewrite the above formula as follows:

F5/F12

Excel formulas begin with the "=' sign

So, the above formula becomes

= F5/F12

Hence, the Excel formula to enter in cell H5 using the relative style of cell referencing is = F5/F12

Read more about Excel formulas at:

brainly.com/question/1285762

#SPJ1

The object can only stick out of the water because of the Archimede's principle.

Archimedes' principle states that the buoyant force acts vertically and upwards on bodies totally or partially immersed in fluids, moreover, according to this principle, such force has the same value as the weight of the fluid, displaced by the insertion of the body.

With that being said, following the Archimede's principle:

Weight of water displaced by floating object = Weight of object; so

Volume of water displaced = Part below water line; changing values and using the pseawater = [tex]1024kg/m^{3}[/tex]:

[tex]\frac{m}{\rho} \\\\\frac{1255}{1024} = 1,2255859375m^{3}[/tex]

Volume of entire object = [tex]\frac{m}{\rho}[/tex]

[tex]\frac{1255}{871} = 1,4408725603m^{3}[/tex]

Volume that sticks out of the water: Volume of entire object - Volume of water displaced; so: 1,4408725603 - 1,2255859375 = 0,2152866228m3

See more about buoyancy at: brainly.com/question/19168433

#SPJ1

Answer: Your non-work related use of a laptop could increase vulnerability.

Explanation: Vulnerability is one of the most important and stressed out section in IT, so it's best to decrease that possibility whenever!

I hope this helps!

In canvas, apps are identified as:

An External Tool is one that helps Canvas users along with the use of LTI learning resources and activities gotten from other websites and academic technologies.

Note that Canvas is known to have a unique features that are said to be available so that one can link to courses such as external tools.

Hence,  In canvas, apps are identified as:

Learn more about Canvas from

https://brainly.com/question/5527678

#SPJ1

Using the computational knowledge in JAVA it is possible to write a code that Write a while loop that adds 5 to userNum while userNum

// declaring variable userNum

var userNum = 5;

// variable ans to store all answers and print them in single line

// (as expected in sample output)

var ans = "";

// while loop, while userNum is <= 20

// (to get output 25 on screen, we need to run loop till less-than-equal)

while(userNum <= 20) {

 userNum += 5;

 ans += userNum + " ";

}

// displaying final output on console

console.log(ans);

See more about JAVA at brainly.com/question/12975450

#SPJ1