Is the work for circular motion proportional to a) The radius b) The circumference c) There is no work d) Something else

When a piece of copper wire from a hardware store is heated and then returned to room temperature, it becomes softer due to a process known as annealing. Annealing is a heat treatment that alters the physical and sometimes chemical properties of a material, making it more ductile and less hard.

During the heating process, the copper atoms gain energy, which allows them to move more freely within the material. This increased mobility leads to a redistribution of dislocations and a reorganization of the crystal lattice structure. When the wire is cooled down to room temperature, the atoms slowly return to their original positions, but with a more uniform and less stressed arrangement. This new arrangement results in a material with improved ductility and reduced hardness, making the copper wire softer.

In summary, heating a copper wire and allowing it to cool down to room temperature results in a process called annealing. This process redistributes dislocations and reorganizes the crystal lattice structure, ultimately making the material more ductile and less hard.

Consequently, the copper wire becomes softer, which can be useful for applications that require increased flexibility and reduced brittleness.

To know more about annealing, refer to the link below:

https://brainly.com/question/31314006#

#SPJ11

Observers back on Earth would say it took them 1,300 years to get there, but the travelers would say it took them much less time due to time dilation caused by their high speed.

Time dilation is a difference in the elapsed time measured by two observers, caused by a relative velocity between them or a difference in gravitational potential. It is a prediction of the theory of relativity.

Speed is the measure of how fast an object is moving, calculated as the distance traveled per unit of time, without regard to direction or displacement. It is measured in meters per second (m/s).

According to the given information:

Observers back on Earth would say it took them 1,300 years to get there, but the travelers would say it took them much less time due to time dilation caused by their high speed. Time dilation means that time passes slower for objects in motion than for stationary objects. As a result, the travelers would experience time differently and their journey would seem much shorter to them than it would to observers on Earth. However, the exact amount of time the travelers experience would depend on the speed they were traveling at.

To know more about time dilation visit:

https://brainly.com/question/30493090

#SPJ11

To find the enthalpy change of the given reaction, we need to use Hess's Law. Hess's Law states that the enthalpy change of a reaction is independent of the pathway between the reactants and products and depends only on the initial and final states of the system.

We can write the given reaction as a combination of the following reactions:

CH4(g) → C(s) + 2H2(g)

C(s) + 2Cl2(g) → CCl4(g)

2H2(g) + Cl2(g) → 2HCl(g)

We need to flip the first equation and multiply the second and third equations by 2 to balance the number of moles of reactants and products:

C(s) + 2H2(g) → CH4(g) ΔH = +74.6 kJ

2C(s) + 4Cl2(g) → 2CCl4(g) ΔH = -191.4 kJ

4H2(g) + 2Cl2(g) → 8HCl(g) ΔH = -184.6 kJ

Adding these three equations gives the overall equation:

CH4(g) + 4Cl2(g) → CCl4(g) + 4HCl(g) ΔH = -301.4 kJ

Therefore, the enthalpy change of the given reaction is -301.4 kJ.

Learn more about Hess's Law here:

https://brainly.com/question/14561923

#SPJ11

Answer:When we say current is moving through a circuit, we mean that electric charge is moving through the circuit. Electric current is the flow of electric charge in a circuit, typically carried by electrons in a conductive material such as a wire. The direction of the current is defined as the direction of flow of positive charge, which is opposite to the direction of flow of electrons.

Explanation:

A cosmic calendar is a visualization tool used to represent the history of the universe on a calendar year, where January 1 represents the Big Bang and December 31 represents the present day.

The universe is the vast expanse of space and all matter and energy within it. It includes everything from the smallest subatomic particles to the largest galaxies and beyond. The universe is estimated to be approximately 13.8 billion years old, having originated in the Big Bang, a colossal explosion that occurred nearly 14 billion years ago. The universe is constantly expanding, with galaxies moving away from each other at ever-increasing speeds.

The universe is composed of different types of matter, including dark matter and ordinary matter. The latter includes atoms, which are the building blocks of all physical matter. The universe is also filled with energy in various forms, including light and electromagnetic radiation.

To learn more about Universe visit here:

brainly.com/question/9724831

#SPJ4

To find the distribution of dust in the Milky Way Galaxy, you should observe in the spectrum is the infrared portion of the spectrum.

Infrared radiation is particularly effective at penetrating through the dust and gas that make up the interstellar medium, allowing astronomers to observe objects and regions that would otherwise be obscured in other parts of the spectrum. Dust in the Milky Way absorbs and scatters visible light, making it challenging to accurately map its distribution using optical observations. However, the same dust grains emit infrared radiation, providing a direct way to measure their distribution.

By observing the infrared emission from the dust, scientists can determine the location, temperature, and density of the dust throughout the galaxy. Infrared observations have been instrumental in advancing our understanding of the Milky Way's structure, including revealing the presence of previously hidden star-forming regions and tracing the distribution of the galaxy's spiral arms. Observing the infrared portion of the spectrum is thus essential for studying the distribution of dust in the Milky Way Galaxy.

To learn more about Milky Way's here

https://brainly.com/question/30714548

#SPJ11

When a metal rod is pulled through a tapered hole smaller than its diameter, the strength of the metal increases due to work hardening which is also known as strain hardening.

As the metal rod is forced through the tapered hole, it undergoes plastic deformation. This means that the metal's shape changes permanently without breaking. During this plastic deformation, the metal's crystal structure becomes more disordered, causing an increase in dislocation density which is the number of dislocations per unit volume.

The increase in dislocation density hinders the movement of dislocations in the metal, making it more resistant to further deformation. This increased resistance to deformation leads to an increase in the strength of the metal in the rod, a phenomenon known as work hardening or strain hardening.

To know more about the crystal structure of metal visit:

https://brainly.com/question/31577431

#SPJ11

Experiments allow physicists today to reproduce (on very small scales) energy and temperature conditions thought to have prevailed in the early universe as far back in time as about one trillionth of a second after the Big Bang.

The study of the early universe is known as cosmology, and physicists use a variety of tools to probe the conditions that existed during its formation. One of the most important of these tools is the Large Hadron Collider (LHC) at CERN, which is capable of producing particle collisions at energies that were last seen in the universe just after the Big Bang. By studying the behavior of particles in these collisions, physicists hope to gain insights into the fundamental forces and particles that govern the universe at its most basic level. Through these experiments, physicists can test theories about the early universe and better understand the nature of the cosmos.

Know more about Big Bang here:

https://brainly.com/question/18297161

#SPJ11

Gravitational wave observatories, such as LIGO, have allowed scientists to detect a range of cosmic events that produce gravitational waves. These events include the collision of black holes, the merger of neutron stars, and even the vibrations produced by the formation of the universe shortly after the Big Bang.

Scientists have been able to detect several types of events with gravitational wave observatories, such as LIGO. By detecting these gravitational waves, scientists are able to gain a better understanding of the universe and the fundamental laws of physics that govern it. These events include:
1. Binary black hole mergers: When two black holes orbit each other and eventually merge, they produce gravitational waves. LIGO has detected multiple instances of these mergers.
2. Binary neutron star mergers: Similar to black hole mergers, when two neutron stars orbit each other and merge, they emit gravitational waves. LIGO and Virgo observatories detected a neutron star merger in 2017.
These detections have provided valuable insights into the astrophysics of black holes and neutron stars, as well as improved our understanding of the fundamental physics of gravitational waves.

learn more about neutron star here: brainly.com/question/31544697

#SPJ11

Answer:

Approximately [tex]8.70 \times 10^{-14}\; {\rm N}[/tex], assuming that both balls are of uniform density.

Explanation:

The gravitational attraction between two spheres of uniform density is:

[tex]\begin{aligned}F &= \frac{G\, M\, m}{r^{2}}\end{aligned}[/tex],

Where:

Apply unit conversion and ensure that mass and distance are both measured in standard units:

[tex]\displaystyle m = 1.50\; {\rm g} \times \frac{1\; {\rm kg}}{10^{3}\; {\rm g}} = 1.50 \times 10^{-3}\; {\rm kg}[/tex].

[tex]\displaystyle M = 870.0\; {\rm g} \times \frac{1\; {\rm kg}}{10^{3}\; {\rm g}} = 0.8700\; {\rm kg}[/tex].

[tex]\displaystyle r = 10.0\; {\rm cm} \times \frac{1\; {\rm m}}{100\; {\rm cm}}= 0.100\; {\rm m}[/tex].

Substitute these value into the equation and evaluate:

[tex]\begin{aligned}F &= \frac{G\, M\, m}{r^{2}} \\ &= \frac{(6.67 \times 10^{-11}\; {\rm m^{3}\cdot s^{-1}\cdot kg^{-2}})\, (0.8700\; {\rm kg})\, (1.50\times 10^{-3}\; {\rm kg})}{(0.100\; {\rm m})^{2}} \\ &= \frac{(6.67 \times 10^{-11})\, (0.8700)\, (1.50\times 10^{-3})}{(0.100)^{2}}\; {\rm kg\cdot m\cdot s^{-2}} \\ &= \frac{(6.67 \times 10^{-11})\, (0.8700)\, (1.50\times 10^{-3})}{(0.100)^{2}}\; {\rm N} \\ &\approx 8.70 \times 10^{-14}\; {\rm N}\end{aligned}[/tex].

If the air bags are not in proper operating condition, the warning light will stay on.

It is important to have the air bags checked and repaired by a qualified mechanic to ensure they are functioning properly in the event of an accident. Driving with malfunctioning air bags can be dangerous and increase the risk of injury in a collision.

Some of the common causes of the airbag warning light are:

Faulty sensors: The sensors are devices that monitor various parameters of your car and tell the computer when to inflate the airbags. If the sensors are damaged, malfunctioning, or tripped accidentally, they can trigger the warning light.

Wet airbag module: The airbag module is an electronic device that controls the airbag system. It is usually located under the seat or behind the dashboard. If the module gets wet due to flooding, spills, or moisture, it can cause corrosion or short circuits that can activate the warning light.

Worn out airbag clock springs: The airbag clock springs are spiral wires that connect the driver’s airbag on the steering wheel to the electrical system. They allow the steering wheel to rotate while maintaining contact with the airbag. Over time, these wires can wear out or break and cause a loss of communication between the airbag and the computer.

Deactivated airbag: The airbag can be deactivated due to a fault in the airbag itself or in any of its components, such as the inflator, wiring, or connector. This can happen due to age, wear and tear, impact, or tampering.

to learn more about Faulty sensors click here:

brainly.com/question/30499734

#SPJ11

The average emissivity of the surface and rate of radiation emission in W/m2 can be calculated using relevant formulas.

The emissivity of a surface is a measure of its ability to emit thermal radiation.

To determine the average emissivity of a surface, the ratio of the actual radiation emitted by the surface to that emitted by a blackbody at the same temperature must be calculated.

The rate of radiation emission from the surface can be determined by multiplying the Stefan-Boltzmann constant by the emissivity of the surface and the fourth power of its temperature.

This will give the rate of energy emitted per unit area of the surface. The resulting value is expressed in watts per square meter (W/m2).

For more such questions on emissivity, click on:

https://brainly.com/question/30580585

#SPJ11

The angular acceleration of the disk drive is 159.16 rad/s².

θ = ωit + (1/2)αt²

where θ is the angular displacement, t is the time, and α is the angular acceleration.

4π = (1/2)α(0.0795)²

α = 159.16 rad/s²

Angular displacement is a measure of the change in the orientation or position of an object around a fixed point or axis. In physics, it is usually measured in radians and is defined as the angle swept out by a rotating object with respect to a reference point. It is a vector quantity, meaning that it has both magnitude and direction. The magnitude of angular displacement is the absolute value of the angle of rotation, while the direction is given by the right-hand rule, which specifies whether the rotation is clockwise or counterclockwise.

Angular displacement is an important concept in physics, especially in the study of rotational motion. It is closely related to other rotational quantities such as angular velocity and angular acceleration. In addition to being used in physics, angular displacement also has practical applications in engineering and technology, such as in the design and control of motors, turbines, and other rotating machinery.

To learn more about Angular displacement visit here:

brainly.com/question/26483834

#SPJ4

According to the given information force constant is 41.84 N/m.

To find the force constant of the spring, we'll use the total mechanical energy formula for a spring-mass system, which is given by:
Total mechanical energy (E) = (1/2) * k * A^2
where k is the force constant, A is the amplitude (0.0490 m), and E is the total mechanical energy (0.0500 J).
Now, we can solve for k:

0.0500 J = (1/2) * k * (0.0490 m)^2

To find k, first multiply both sides of the equation by 2:

0.1000 J = k * (0.0490 m)^2

Now, divide both sides by (0.0490 m)^2:

k = 0.1000 J / (0.0490 m)^2

k ≈ 41.84 N/m

So, the force constant of the spring is approximately 41.84 N/m.

The force constant is an important property of springs and elastic materials as it determines the amount of force required to stretch or compress them. The higher the force constant, the stiffer the spring or material, and the more difficult it is to stretch or compress it. Conversely, a lower force constant indicates a softer and more flexible spring or material.The force constant is also used in various fields of physics, including optics, atomic physics, and quantum mechanics. In these fields, it is used to describe the behavior of various systems, such as the motion of atoms in a molecule or the oscillations of a light wave.

To know more about force constant visit:

https://brainly.com/question/15170479

#SPJ11

The flutes on a twist drill serve multiple functions, including (b) improving hole size accuracy by helping to maintain a consistent diameter throughout the drilling process, (d) providing passageways for extraction of chips to prevent clogging and overheating, and (c) to some extent, lubricating the cutting edges to reduce friction and heat buildup.

However, they do not add rigidity or strengthen the drill.

The flutes on a twist drill serve the function of (d) providing passageways for extraction of chips. This improves the drilling process by efficiently removing debris and allowing for smooth drilling operation.

To know more about multiple functions visit:-

https://brainly.com/question/31465487

#SPJ11

Rhodopsin is a photosensitive pigment found in the retina of the eye that plays a crucial role in the process of vision. It is known to be most sensitive to light with a vacuum wavelength of 500 nm.

Wavelength and frequency are interrelated physical quantities that are commonly used to describe electromagnetic radiation, which includes light. The frequency of a wave is defined as the number of cycles that pass a given point in space per unit of time, while the wavelength is the distance between two consecutive crests or troughs of a wave.

Therefore, the frequency of a wave is inversely proportional to its wavelength.The peak frequency of the cosmic microwave background radiation (CMB) is around 160.2 GHz, corresponding to a wavelength of approximately 1.9 mm. This means that the CMB has a much lower frequency and longer wavelength than the light that rhodopsin is most sensitive to.

In fact, the frequency of the CMB is about 300,000 times lower than the frequency of the 500 nm light that rhodopsin is most sensitive to. This is because the CMB is a form of radio wave radiation, which has much longer wavelengths and lower frequencies than visible light.

In conclusion, the light that rhodopsin is most sensitive to has a higher frequency than the peak frequency of the cosmic microwave background radiation. The frequency of the light is around 600 THz, while the frequency of the CMB is around 160.2 GHz. Therefore, it is evident that the frequency of radiation plays a crucial role in determining its properties and interactions with matter.

To know more about wavelength click here

brainly.com/question/28466888

#SPJ11

The average momentum of the avalanche is approximately 1,090,909,090 kg*m/s.  By using momentum formula Momentum = mass x velocity

To calculate the average momentum of an avalanche, we first need to find its mass, then its velocity, and finally, use the momentum formula. Here are the steps:

1. Calculate the volume of the snow layer:
Volume = thickness x length x width = 0.4 m (40 cm) x 100 m x 500 m = 20,000 m³

2. Find the mass of the snow layer, assuming the snow density is 300 kg/m³ (a typical value):
Mass = volume x density = 20,000 m³ x 300 kg/m³ = 6,000,000 kg

3. Calculate the average velocity of the avalanche:
Distance = 1 km = 1,000 m
Time = 5.5 s
Velocity = distance / time = 1,000 m / 5.5 s ≈ 181.82 m/s

4. Compute the average momentum:
Momentum = mass x velocity = 6,000,000 kg x 181.82 m/s ≈ 1,090,909,090 kg*m/s

To know more about Momentum Visit:

https://brainly.com/question/30677308

#SPJ11

Answer:

The two wires exert the same force on each other.

Explanation:

Mira will observe that varying the current in wire 1 affects the force per unit length on wire 1.

When the wires are kept as far apart as possible and the current in wire 2 is set to a constant value of 5 A, varying the current in wire 1 will affect the force per unit length on wire 1.

According to Ampere's law, the magnetic field created by a current-carrying wire is directly proportional to the current passing through the wire. When the current in wire 1 is varied, it will create a magnetic field around wire 1.

If the current in wire 1 is increased, the magnetic field around wire 1 will also increase. As a result, the force per unit length on wire 1 will increase. Mira will observe a stronger force acting on wire 1 as the current in wire 1 is increased.

On the other hand, if the current in wire 1 is decreased, the magnetic field around wire 1 will weaken, leading to a decrease in the force per unit length on wire 1. Mira will observe a weaker force acting on wire 1 as the current in wire 1 is decreased.

Therefore, Mira will observe that varying the current in wire 1 affects the force per unit length on wire 1, with an increase in current leading to a stronger force and a decrease in current resulting in a weaker force.

To learn more about force, refer below:

https://brainly.com/question/13191643

#SPJ11

An elementary student of mass m=34 kg is swinging on a swing. the length from the top of the swing set to the seat is L=4.7 m.

a) The minimum speed the child must be moving at the top of the path in order to make a full circle is  9.14 m/s.

b) The apparent weight of the child at the top of the path is 1005.52 N.

c) The apparent weight of the child at the bottom of the path is 333.54 N.

We can solve this problem using the conservation of energy and the centripetal force equation.

(a) At the top of the swing, the child is momentarily at rest, so all of the kinetic energy has been converted to potential energy. All of the potential energy has been transformed into kinetic energy at the swing's bottom.

The minimum speed required at the top of the path to make a full circle is the speed at which the centripetal force required to keep the child moving in a circle is equal to the gravitational force pulling the child downward.

Setting the centripetal force and gravitational force equal, we have:

[tex]mv^2 / L[/tex]= mg

where m is the mass of the child, v is the speed of the child at the top of the path, L is the length of the swing, and g is the acceleration due to gravity.

Solving for v, we get:

v = [tex]\sqrt{(gL) }[/tex]= [tex]\sqrt{(9.81 m/s^2 * 4.7 m) }[/tex]≈ 9.14 m/s

Therefore, the minimum speed the child must be moving at the top of the path in order to make a full circle is approximately 9.14 m/s.

(b) At the top of the path, the child is momentarily upside-down, so the apparent weight is the sum of the gravitational force and the centripetal force required to keep the child moving in a circle.

The gravitational force on the child is:

[tex]mg = 34 kg * 9.81 m/s^2 = 333.54 N[/tex]

To keep the kid moving in a circle, you need to apply the following centripetal force:

[tex]mv^2 / L = 34 kg * (9.14 m/s)^2 / 4.7 m[/tex] ≈ [tex]671.98 N[/tex]

Therefore, the apparent weight of the child at the top of the path is approximately 1005.52 N (333.54 N + 671.98 N).

(c) At the bottom of the path, the child is moving at the same speed as at the top, so the centripetal force required to keep the child moving in a circle is the same. However, at the bottom of the path, the gravitational force is the only force acting on the child.

The gravitational force on the child is the same as in part (b):

mg = [tex]34 kg * 9.81 m/s^2 = 333.54 N[/tex]

The centripetal force required to keep the child moving in a circle is:

[tex]mv^2 / L = 34 kg * (9.14 m/s)^2 / 4.7 m[/tex] ≈ [tex]671.98 N[/tex]

Therefore, the apparent weight of the child at the bottom of the path is approximately 333.54 N (equal to the gravitational force).

To learn more about the centripetal force equation, refer:-

https://brainly.com/question/14021112

#SPJ11

The angular acceleration of the blade is 23.3 rad/s^2, and the angle turned by the blade is 420 radians.

We can use the equations of rotational kinematics to solve this problem. The initial angular velocity is zero, and the final angular velocity is 140 rad/s. The time taken is 6.00 s, and the diameter of the circular saw blade is 0.200 m.

The equation for angular acceleration is:

α = (ωf - ωi) / t

where α is the angular acceleration, ωi is the initial angular velocity, ωf is the final angular velocity, and t is the time taken.

Plugging in the values given in the problem, we get:

α = (140 rad/s - 0 rad/s) / 6.00 sα = 23.3 rad/s^2

The equation for the angle turned by the blade is:

θ = ωi t + (1/2) α t^2

where θ is the angle turned by the blade, ωi is the initial angular velocity, α is the angular acceleration, and t is the time taken.Plugging in the values given in the problem, we get:

θ = 0 rad + (1/2) x 23.3 rad/s^2 x (6.00 s)^2θ = 420 rad.

For such more questions on Angular acceleration:

https://brainly.com/question/29342095

#SPJ11

The correct option is E,  Make the repeated measurements at equal distances and using STDEV/(Sqrt of range of samples) is the best way to estimate the uncertainty in the power of magnetic field measurement in this scenario.

A magnetic field is a physical phenomenon that results from the motion of electric charges. It is a force field that surrounds a magnet or an electrically charged particle and exerts a force on other magnets or charged particles in the vicinity.

The magnetic field is characterized by its direction and strength, which can be visualized using field lines that represent the path a hypothetical small magnetic north pole would take if it were placed in the field. The direction of the field lines indicates the direction of the force that a north pole would experience if it were placed in the field. Magnetic fields are generated by moving charges, such as the flow of current in a wire or the motion of electrons within an atom.

To learn more about Magnetic field visit here:

brainly.com/question/23096032

#SPJ4

Complete Question:

at the same time as reading the power of magnetic discipline at every role from the magnet (or coil) the usage of the magnetometer utility in your phone, you noticed the analyzing was fluctuating randomly. that's the best way to estimate the uncertainty in the energy of magnetic area measurement?

A). Make the repeated measurements at several distances and use STDEV/(Sqrt of variety of samples)

B). Use the decision of the electricity readings in the utility

C). Use the resolution of the meter scale

D). Use the quadrature rule

E). Make the repeated measurements at equal distance and use STDEV/(Sqrt of range of samples)

A metal block has a density of 2500 kg per cubic meter and a volume of 2 cubic meters. The block's mass is 5000 kg.

The mass of the metal block can be calculated using the formula:

mass = density x volume

where density is measured in kilograms per cubic meter (kg/m³) and volume is measured in cubic meters (m³).

In this case, the density of the metal block is 2500 kg/m³ and the volume is 2 m³. Substituting these values into the formula, we get:

mass = density x volume

mass = 2500 kg/m³ x 2 m³

mass = 5000 kg

Therefore, the mass of the metal block is 5000 kg.

To know more about the metal block refer here :

https://brainly.com/question/29807198#

#SPJ11

Planetary rings are composed of numerous particles orbiting in their planet's equatorial plane, known to exist around all jovian planets (option e- all of these).

Planetary rings are composed of a large number of individual particles, such as dust, ice, and rock fragments, that orbit their planet in accordance with Kepler's third law.

These rings are found orbiting in the equatorial plane of their respective planets and are commonly associated with the jovian planets – Jupiter, Saturn, Uranus, and Neptune.

While the distance between the rings and the planet may vary, they are generally closer to their planet than any of the planet's large moons.

Planetary rings are a fascinating feature of our solar system's gas giants, providing insight into the formation and evolution of planets.

Thus, the correct choice is (e) all choices are correct.

For more such questions on Planetary rings, click on:

https://brainly.com/question/21216302

#SPJ11

Herschel's assumption of uniform star distribution in the Milky Way was incorrect. Technological advancements allowed us to map the galaxy's structure and determine the Sun's position in an outer arm.

Herschel's conclusion that the Sun was close to the center of the Milky Way was based on the assumption that the stars in the Milky Way were uniformly distributed. However, this assumption turned out to be incorrect. Later studies, such as those by Harlow Shapley, demonstrated that the Milky Way is a barred spiral galaxy and that the Sun is actually located in one of its outer arms, known as the Orion Arm.

Additionally, Herschel's counting of stars was limited by the technology of his time, which did not allow him to see through the dust and gas that make up the Milky Way's disk. Today, with modern telescopes, we can observe stars and other objects in different wavelengths, allowing us to peer deeper into the galaxy and map its structure.

Herschel's conclusion about the location of the Sun in the Milky Way was based on limited information and a flawed assumption. Subsequent observations and technological advancements have since allowed us to better understand the structure of our galaxy, revealing that the Sun is located much farther away from the center than previously thought.

To learn more about Milky Way

https://brainly.com/question/18365761

#SPJ4

The speed of the water in the narrowed portion of the stream is 10.2 m/s.

To solve it, we'll need to apply the principle of continuity in fluid dynamics, which states that the product of the cross-sectional area (A) and the speed (v) of the fluid remains constant throughout the stream.

Original area = A₁
Original speed = v₁ = 5.1 m/s

Narrowed area = A₂ = A₁ / 2 (since it's half of the original area)
New speed = v₂ (which we need to find)

According to the principle of continuity, A₁v₁ = A₂v₂.

Now, we can solve for v₂:

v₂ = A₁v₁ / A₂

Since A₂ = A₁ / 2, we can substitute this into the equation:

v₂ = A₁v₁ / (A₁ / 2)

The A₁ terms will cancel out, leaving:

v₂ = 2v₁

Now, we can plug in the value of v₁ (5.1 m/s):

v₂ = 2 × 5.1 m/s

v₂ = 10.2 m/s

So, the speed of the water in the narrowed portion of the stream is 10.2 m/s.

To know more about speed, click here

https://brainly.com/question/17661499

#SPJ11

The current in the hair dryer is approximately 13.18 A.

An electric current is a stream of charged particles, such as electrons or ions, moving through an electrical conductor or space. It is measured as the net rate of flow of electric charge through a surface or into a control volume.

To find the current in the hair dryer when it operates on a 110.0 V line and draws 1450 W of power, we can use the formula:

Power (P) = Voltage (V) × Current (I)

We are given the power (1450 W) and the voltage (110.0 V), so we can solve for the current (I) as follows:

1. Rearrange the formula to solve for I:

I = P / V
2. Substitute the given values:

I = 1450 W / 110.0 V
3. Calculate the result:

I ≈ 13.18 A

Learn more about current:

https://brainly.com/question/1100341

#SPJ11

The angle for the third-order minimum of 595-nm wavelength yellow light falling on double slits separated by 0.185 mm is approximately 0.552°.

To calculate the angle for the third-order minimum of 595-nm wavelength yellow light falling on double slits separated by 0.185 mm, we can use the formula for destructive interference in a double-slit experiment:

d * sin(θ) = m * λ

where:
- d is the distance between the slits (0.185 mm or 0.000185 m)
- θ is the angle we want to find
- m is the order of the minimum (m = 3 for the third-order minimum)
- λ is the wavelength of the light (595 nm or 5.95 * 10^-7 m)

Rearrange the formula to solve for the angle θ:

sin(θ) = (m * λ) / d

Substitute the values:

sin(θ) = (3 * 5.95 * 10^-7 m) / 0.000185 m

sin(θ) ≈ 0.00963

Now, find the angle using the inverse sine function:

θ ≈ arcsin(0.00963)

θ ≈ 0.552°

So, the angle for the third-order minimum of 595-nm wavelength yellow light falling on double slits separated by 0.185 mm is approximately 0.552°.

to learn more about wavelength click here:

brainly.com/question/12377285

#SPJ11

To answer what factor will control whether or not the universe keeps expanding or eventually starts to contract.

The factor that will control whether or not the universe keeps expanding or eventually starts to contract is the amount of matter and energy in the universe. If there is enough matter and energy, the gravitational pull will eventually cause the expansion to slow down and stop, and the universe will begin to contract. However, if there is not enough matter and energy, the expansion will continue indefinitely. Scientists are still studying the composition of the universe to determine whether or not there is enough matter and energy to cause a contraction.

Learn more about universe at: https://brainly.com/question/28365362

#SPJ11