In this project you will write a set of instructions (algorithm). The two grids below have colored boxes in different
locations. You will create instructions to move the colored boxes in grid one to their final location in grid two. Use the
example to help you. The algorithm that you will write should be in everyday language
(no pseudocode or programming language). Write your instructions at the bottom of the
page.
Example: 1. Move
the orange box 2
spaces to the right.
2. Move the green
box one space
down. 3. Move the
green box two
spaces to the left.
Write your instructions. Review the rubric to check your final work.
Rules: All 6 colors (red, green, yellow, pink, blue, purple) must be move to their new location on the grid. Block spaces are
barriers. You cannot move through them or on them – you must move around them

Answer:

5.0674

Explanation:

Given that :

Mean, μ = 5 pounds

Standard deviation, σ = 0.1

Given that weight are normally distributed ;

From the Z table, the Zscore or value for 75th percentile weight is :

P(Z < z) = 0.75

z = 0.674

Using the relation :

Zscore = (x - μ) / σ

x = weight

0.674 = (x - 5) / 0.1

0.674 * 0.1 = x - 5

0.0674 = x - 5

0.0674 + 5 = x - 5 + 5

5.0674 = x

The weight which corresponds to the 75th percentile is 5.0674

Answer:

A computing system can be referred to as a combination of hardware and software forms created to intentionally interact in specific ways such that the combination of both is able to achieve certain tasks.

Explanation:

Whilst a hardware refers to all the visible parts of the computing system such as the Visual Display Monitor or Screen, Keypads or Keyboards, Mouse and other input devices such as the camera, storage devices etc, the Software refers to intangible part - the logical instructions (machine language) which instructions the hardware on what or what not to do.

Cheers

Answer:

A lower bound on the optimal integer value.

Explanation:

The question is poorly typed.  The original question requires the optimal solution of the objective function of a minimization problem

I will answer this question base on the above illustration.

When an objective function is to be minimized, it means that the objective function will take the feasible solution with the least value.

The least value are often referred to as the lower bound.

Answer:FSfgvdfftb

Explanation:

c srfv fergvrgfcg

Explanation:

The file named as A10.java has been attached to this response. It contains the source code for the exercises. The source code contains comments explaining important parts of the code.

A few things to note;

i. To add an item to an arraylist, the add() method is used. For example to add an integer 7 to the arraylist named intList, simply write;

intList.add(7);

ii. To add an item to a hashmap, the put() method is used. The put method receives two parameters which are the key and value respectively. The key is a form of identifier used to store or retrieve a particular value in a hashmap. To store an integer 8 with a key of 5 in a hashmap named intMap, for example, simply write;

intMap.put(5,8);

Answer:

The Software Model represents the process abstractly. The different activities involved in developing software products are present in each phase of the software model. The order for each stage to be executed is also specified.

Explanation:

Waterfall model:-

Benefits

Implementing the waterfall model is very easy and convenient.

It is very useful for implementing small systems.

Limitations

If some of the changes are made at certain phases, it may create confusion.

First, the requirement analysis is performed, and sometimes not all requirements can be expressly indicated in the beginning.

Spiral model:-

Benefits

The working model of the system can be quickly designed through the construction of the prototype.

The project can be refined by the developer and the user during the development phase.

Limitations

If customer communication is not good or proper, the result is total project failure or project failure which could lead to project comission.

Answer:

The valid range is 0 to N - 1

Explanation:

Required

Valid range of an array of size N

The index of an array starts from 0, and it ends at 1 less than the size.

Take for instance:

An array of size 4 will have 0 to 3 as its indices

An array of size 10 will have 0 to 9 as its indices

Similarly,

An array of size N will have 0 to N - 1 as its indices

Answer: Press enter at the end of the line.

Explanation:

If you press enter at the end of the line or sentence, it will start a new space underneath your line or sentence.

Answer: hello your question is incomplete attached below is the complete question

answer :

A set() method (non-constructor mutator). ( B )

Explanation:

The type of class methods that is necessary to filter bad arguments to protect private data of your class using validators is :

A set() method (non-constructor mutator)

Answer:

C

Explanation:

Decision Support Systems (DSSs) model information using OLAP, helps in providing assistance to evaluate and choose among different course of action.

For option A, an insurance company using DSS to evaluate risk of providing insurance to drivers who doesn't have perfect records and option B and D medical doctor entering symptoms into a system to aid in diagnosing and treating patients and dentist entering symptoms into a system to help diagnose and treat patients respectively

Answer:

The program is as follows:

prod = 1

isum = 0

for i in range(4):

   num = float(input())

   prod*=num

   isum+=num

avg = isum/4

print('{:.0f}'.format(prod))

print('{:.3f}'.format(avg))  

Explanation:

This initializes the product to 1

prod = 1

..... and sum to 0

isum = 0

The following iteration is repeated 4 times

for i in range(4):

Get input for each number

   num = float(input())

Calculate the product

   prod*=num

Add up the numbers

   isum+=num

This calculates the average

avg = isum/4

Print the products

print('{:.0f}'.format(prod))

Print the average

print('{:.3f}'.format(avg))  

Answer: 0.48

Explanation:

The acid test ratio will be calculated as:

Cash = $100,000

Add: Short term investments = $17,000

Add: Net Current Receivables = $250,000

Total Assets = $367,000

/ Total Current Liabilities = $760,000

Acid Test Ratio will now be:

= Total Assets / Total Liabilities

= $367000/$760000.

= 0.48

Therefore, the acid test ratio is 0.48.

Answer and Explanation:

Using Javascript:

test7_11_13(num){

If(num%7===0||num%11===0||num%13===0){

Console.log("yes it is a multiple of 7,11 or 13");

}

else{

Console.log("It is not a multiple of any of the numbers");

}

function(num){

var makeString= num.toString();

var splitString= makeString.split("");

var makeNumber= splitString.map(Number());

var New_number= makeNumber.reduce(function(a, b) {

return a+b};,0)

}

If(New_number%2===0){

Console.log("it's an even number");

}

else{

Console.log("it's an odd number")

}

If(num%2===0||num%3===0||num%5===0||num%7===0||num%11===0){

console.log("it's not a prime number");

}

else{

console.log("it's a prime number");

}

}

From the above we have used javascript if..else statements to test the conditions for each question and output the answer to the console using console.log(). In the last part for prime number, you could also choose to use else if statements(if,else if, else if) to test the value of the num parameter and output if it's a prime number.

Answer:

Kindly check explanation

Explanation:

The SQL statement above could be interpreted as follows :

create table command is used to create a table named 'persons' with five columns which are labeled :

person I'd : whose data type is an integer

last name column with a variable character data type with maximum length of 255

first name column with a variable character data type with maximum length of 255

address column with a variable character data type with maximum length of 255

city column with a variable character data type with maximum length of 255

The VARCHAR data type is ideal since we expect the column values to be of variable length.

Answer:

public class Person {

   String name;

   int age;

   String phoneNumber;

   public Person(String name, int age, String phoneNumber){

          this.name = name;

          this.age = age;

          this.phoneNumber = phoneNumber;

   }

}

Explanation:

The code above is written in Java.

The following should be noted;

(i) To define a class, we begin with the keywords:

public class

This is then followed by the name of the class. In this case, the name is Person. Therefore, we have.

public class Person

(ii) The content of the class definition is contained within the block specified by the curly bracket.

(iii) The class contains instance variables name, age and phoneNumber which are properties specified by the Person class.

The name and phoneNumber are of type String. The age is of type int. We therefore have;

String name;

int age;

String phoneNumber;

(iv) A constructor which initializes the instance variables is also added. The constructor takes in three parameters which are used to respectively initialize the instance variables name, age and phoneNumber.

We therefore have;

public Person(String name, int age, String phoneNumber){

          this.name = name;

          this.age = age;

          this.phoneNumber = phoneNumber;

   }

(v) Notice also that a constructor has the same name as the name of the class. In this case, the constructor's name is Person.

Answer:

The class and constructor in C++ is as follows:

class Person {

 public:

   string name;     int age;     int phone;

   Person (string x, int y) {  

     name = x;       age = y;  

   }

};

Explanation:

This defines the class

class Person {

The specifies the access specifier

 public:

This declares the attributes; name, age and phone number

   string name;      int age;      int phone;

This defines the constructor for the name and age

   Person (string x, int y) {  

This gets the name and age into the constructor

     name = x;       age = y;  

   }

};

Answer:

Explanation:

The correct answer to this open question is the following.

Unfortunately, you forgot to include a question. Here, we just have a statement.

What is your question? What do you want to know?

If this is a true or false question, the answer is "true."

It is true that a good CRM should integrate marketing, sales, and customer support activities measuring and evaluating the process of knowledge acquisition and sharing.

The reason is that effective investment in Customer Relationship Management (CRM) should be able to operate efficientñy with these management aspects in order to increase the productivity and efficiency of the company.

A good CRM has to facilitate the operations of a company, improving time management and people's activities that can produce better results accomplishing the companies goals and fulfilling the key performing indicators (KPI)

Answer:B

Explanation: she she

Solution :

A friend of mine have an old version of computer PC having the following components :

Input devices

Model name of the keyboard -- PUNTA , model number -- P-KB515

Model name of the mouse -- PUNTA, model number -- P-KB515

Output devices

Speaker : COMPAQ

Monitor : ACER,  Model Number  --- EB192Q

Storage : 500 MB capacity hard disk

RAM : 2 GB

Processor : Intel Pentium dual E1260 at the rate 1.80 GHz

It is provided with audio jacks

Answer:

a) 20 users

b) 0.1  or 1/10

c) P ( X = n )   =   [tex]^{120}C_{n} ( 0.10 )^n (0.9)^{120-n}[/tex]

d) 0.008

Explanation:

Given data:

Link shared by users = 3 Mbps

each user requires ; 150 kbps

percentage transmitted by each user = 10%

a) Determine the number of users can be supported

number of users = 3 Mbps / 150 kbps = 3000 / 150 = 20 users

b) P( user is transmitting )

given that percentage transmitted by each user = 10%

since packet switching is used ; P ( user is transmitting ) = 10% = 0.1

c) P ( n users are transmitting simultaneously )

let the number of users ( i.e. N ) = 120

number transmitting = n

P ( user is transmitting ) = 0.10

using Binomial distribution

P ( X = n ) = [tex]^{N}[/tex]Cₙ ( P )ⁿ ( 1 - P )^[tex]^{N-n}[/tex]

                = [tex]^{120}C_{n} ( 0.10 )^n (0.9)^{120-n}[/tex]

d) P( X ≥ 21 transmitting simultaneously )

P ( X = n ) = [tex]^{120}C_{n} ( 0.10 )^n (0.9)^{120-n}[/tex]

Therefore ; P( X ≥ 21 ) = 1 - P( X ≤ 20 )

                                   = 1 - BINOMDIST(20,120,0.1,1)  ( excel function )

∴ P( X ≥ 21 ) = 1 - 0.992059 ≈ 0.008

Answer:

I think the third one (or the one with monkeys).

Explanation:

2+2 does not equal 5, so the if then statement is void because both parts are wrong.

1+1 does not equal 3 even if 2+3 =5, so it is not the second answer.

3+1 does not equal 3, but monkeys do fly and it is an or option, so when one of them is correct in an or, it is correct.

Answer: No, is this the question?

Explanation: Have a stupendous day! <3

Answer:

a. The user access agreement

Explanation:

The first document that should be created would be the user access agreement. This is a document that holds all of the policies and guidelines that the employees of a company need to follow when using the companies equipment, software, or network. This includes behavior on the internet such as browsing specific sites, illegal activity, or personal hobbies during work hours, as well as offline such as using company hardware for personal gain. This is a document that is absolutely required for every company in order to protect the company from the consequences of certain employee activity.

Answer:

The program in Python is as follows:

import math

def integer_to_reverse_binary(integer_value):

   remainder = ""

   while integer_value>=1:

       remainder+=str(integer_value % 2)

       integer_value=math.floor(integer_value/2)

   reverse_string(remainder)

def reverse_string(input_string):

   binaryOutput=""

   for i in range(len(input_string)-1,-1,-1):

       binaryOutput = binaryOutput + input_string[i]

   print(binaryOutput)

integer_value = int(input("Enter a Number : "))

integer_to_reverse_binary(integer_value)

Explanation:

This imports the math module

import math

This defines the integer_to_reverse_binary function

def integer_to_reverse_binary(integer_value):

This initializes the remainder to an empty string

   remainder = ""

This loop is repeated while the integer input is greater than or equal to 1

   while integer_value>=1:

This calculates the remainder after the integer value is divided by 2

       remainder+=str(integer_value % 2)

This gets the floor division of the integer input by 2

       integer_value=math.floor(integer_value/2)

This passes the remainder to the reverse_string function

   reverse_string(remainder)

The reverse_string function begins here

def reverse_string(input_string):

This initializes the binaryOutput to an empty string

   binaryOutput=""

This iterates through the input string i.e. the string of the remainders

   for i in range(len(input_string)-1,-1,-1):

This reverses the input string

       binaryOutput = binaryOutput + input_string[i]

This prints the binary output

   print(binaryOutput)

The main begins here

This gets input for integer_value

integer_value = int(input("Enter a Number : "))

This passes the integer value to the integer_to_reverse_binary function

integer_to_reverse_binary(integer_value)

The correct answer to this open question is the following.

The feature of organizations to manage needs to know about to build and use information system successful is the following.

Managers of successful organizations should know that companies have hierarchies and different structures in which these companies are organized.

Every company use systems and procedures that could be specialized to the degree the company requires. For that system to function, they have to be perfectly interconnected to all the areas of the company. The goal: to maximize efficiency and accomplish the goals.

Systems and procedures should take into consideration the culture and diversity of the workplace. There are interest groups in every organization that have special characteristics and requirements that have to be taken into consideration to create a much better system.

Good managers must be aware of these elements, and the different roles, goals, management styles, tasks, incentives, and departmental structure of the company so the system can better serve the purpose of the entire organization.

Answer:

I do not understand anything

Answer:

A

Explanation:

[tex]\boxed{ File }[/tex] is a collection of information stored under a single name.

[tex]\bold{ \green{ \star{ \orange{Mystique35}}}}⋆[/tex]

Answer:

Explanation:A collection of information that is stored on a computer under a single name, for example a text document, a picture, or a program. The association between a file and the program that created the file. Displays the contents of the current folder or library.