Answer:
product
Explanation:
Iansiqnsdijsijnweijnjwn
Answer:
What is your question?
Explanation:
??
???
Answer:
Stan TXT
Explanation:
because they are amazing
Nal+ Pb(SO4)2
→> products and reaction type
The reaction is based on law of conservation of mass.
The balanced chemical equation is
[tex]$4 \mathrm{NaI}+\mathrm{Pb}\left(\mathrm{SO}_{4}\right)_{2} \rightarrow \mathrm{PbI}_{4}+2 \mathrm{Na}_{2} \mathrm{SO}_{4}$[/tex]
What is law of conservation of mass?Every balanced chemical equation follows the direction of conservation of mass. This law states that mass can neither be completed nor can be destroyed but it can only be transformed from one condition to another form. This law likewise states that the total number of individual atoms on the reactant side must be comparable to the total number of individual atoms on the product side.
The Law of Conservation of Mass holds because naturally occurring elements are stable under the conditions located on the surface of the Earth. Most elements come from fusion reactions found only in stars or supernovae. Consequently, in the ordinary world of Earth, from the peak of the highest mountain to the depths of the deepest ocean, atoms are not transformed into other elements during chemical reactions. Because of this, individual atoms that make up living and nonliving subjects are very old and each atom have a history. An individual atom of a biologically essential element, such as carbon, may have expended 65 million years buried as coal before standing burned in a control plant, followed by two decades in Earth's environment before being disbanded in the ocean,To learn more about law of conservation of mass, refer:
https://brainly.com/question/15289631
#SPJ2
93.4 g of a metal is heated to 85.0 C in a hot water bath, then dropped into a calorimeter containing 342 ml of water
The specific heat capacity of the metal is determined as 0.76 J/g⁰C.
Mass of the watermass = density x volume
mass = 342 ml x 1 g/ml = 342 g
Specific heat capacity of the metalApply the law of conservation of energy;
Heat lost by the metal = Heat gained by the calorimeter + heat gained by water
(93.4)(85 - 29.3)c = (8.29)(29.3) + (342)(4.186)(29.3 - 26.7)
5,202.38c = 3,965.088
c = 3,965.088/5,202.38
c = 0.76 J/g⁰C
Thus, the specific heat capacity of the metal is determined as 0.76 J/g⁰C.
The complete question is below;
93.4 g of a metal is heated to 85.0 C in a hot water bath, then dropped into a calorimeter containing 342 ml of water (d 1.00 g/mL) at 26.7 . The equilibrium temperature was found to be 29.3 C. Calculate the specific heat of the metal with proper units. (C.cal 8.29 J/c)
Learn more about specific heat capacity here: https://brainly.com/question/16559442
#SPJ1
Briefly explain how a titration experiment can be used to determine the concentration of a strong acid or strong base solution?
Answer:During an acid-base titration, an acid with a known concentration is slowly added to a base with an unknown concentration (or vice versa). A few drops of indicator solution are added to the base. The indicator will signal, by color change, when the base has been neutralizedExplanation:
Cabbage juice indicator solutions can show pH values from acidic to basic.
Which color represents the most basic solution?
Which color represents the most acidic solution?
Which color represents a neutral solution?
More acid solution has red colour, more basic solution has purple colour whereas neutral solution has green colour.
Which color represents the most acidic solution?As the solution becomes more acidic, the color of the solution changes from green toward red.
Which color represents the most basic solution?As the solution becomes more basic, the color changes of the solution from green toward purple.
Which color represents a neutral solution?Green color of the solution represents a neutral solution having pH 7.
So we can conclude that More acid solution has red colour, more basic solution has purple colour whereas neutral solution has green colour.
Learn more about acid here: https://brainly.com/question/25148363
#SPJ1
Identify all resonance forms of the enolate formed, and indicate whether or not a substantial amount of starting ketone will be present together with the enolate at equilibrium. (select all that apply)
At equilibrium, a significant quantity of starting ketone will be present with the enolate in the first case.
What is ketone?Ketones are substances produced by the liver. It is formed when there is insufficient insulin in the body to turn sugar into energy.
What happens in scenario two where the formation of possible enolate ions from the cyclohexan-1, 4-di.ketone by abstraction of acidic proton by suing sodium ethoxide base occurs?In this case a substantial amount of ketone will exist along side the enolate at equilibrium.
Learn more about ketones at;
https://brainly.com/question/27425066
#SPJ1
A measure of peak separation in a chromatographic method that equals the difference in retention time for two components divided by the average of their peak widths is the definition of
A measure of peak separation in a chromatographic method that equals the difference in retention time for two components divided by the average of their peak widths is the definition of resolution.
Retention time can be referred to as the amount of time a solute spends in the stationary and mobile phases of a column.
The analyte's interaction with the stationary phase determines the longer retention period.
The duration of retention will increase as the interaction becomes more strong.
Resolution is defined as the peak separation in a chromatographic procedure that is equal to the difference in retention time for two components divided by the average of their peak widths.
Learn more about resolution
https://brainly.com/question/14300434
#SPJ4
________ are weak bonds that are not strong enough to hold atoms together to form molecules but are strong enough to form bonds within and around large molecules.
Hydrogen bonds are weak bonds that are not strong enough to hold atoms together to form molecules but are strong enough to form bonds within and around large molecules.
The hydrogen bond is weak bond.The hydrogen bond is electrostatic force of attraction between hydrogen atom and more electronegative atoms or group ( like Florine , oxygen or nitrogen) which is contently bonded.The hydrogen bond is occur in polar , contently bond atoms in different molecules.Example is H-O-H or [tex]NH_{3}[/tex]The positively charged hydrogen side of one water molecule is bond with negatively charged oxygen side of another molecule.learn about Hydrogen bond
https://brainly.com/question/10904296
#SPJ4
Calculate the pH if the [H^+] = 9.71 ×
10^-8
Answer:
pH = 7.01
Explanation:
The pH can be calculated using the formula:
pH = -log[H⁺]
In this formula, [H⁺] represents the concentration of H⁺. Since you have been given this value, you can easily find the pH.
pH = -log[H⁺]
pH = -log[9.71 x 10⁻⁸]
pH = 7.01
What are the spectator ions when k2s and mgcl2 are combines
The spectator ions of when k2s and mgcl2 are combined are 1. Cl- (aq) and 2. K (aq)
the balance equation of MgCl2 and K2S is as follows:
MgCl2(aq) + K2S(aq) ------> MgS(s) + 2KCl(aq)
the net ionic equation is as follows:
Mg 2+ (aq) + 2 Cl- (aq) + 2K (aq) + S 2- (aq) = MgS(s) +2 Cl- (aq) + 2K (aq)
The overall reaction is as follows:
Mg 2+ (aq) + S 2- (aq) = MgS(s)
Thus the spectator ions are the following:
Cl- (aq)
K (aq)
If we compare the solutions before and after the reaction, sodium and nitrate ions are present in both the solutions. They do not undergo any chemical exchange at all. These ions are called spectator ions since they don't participate in the chemical reaction at all (they simply "watch").
Compare the reactant and product sides of the rewritten reaction and cross out the spectator ions. Any dissolved ions that appear in the same form on both sides are spectator ions.
Learn more about spectator ions here https://brainly.com/question/22277121
#SPJ4
The study of the structure of matter and the composition of substance, their properties, and their chemical reactions is called:
Answer: chemistry
Explanation: see definition on wikipedia.
What are the standard temperature and pressure conditions enthalpy is usually measured under?
A. 1 kPa and 273 K
B. 100 kPa and 298 K
OC. 298 kPa and 100 K
D. 1 kPa and 100 K
Reset Selection
The standard temperature and pressure conditions enthalpy is usually measured under are 1kPa and 273K (option A).
What is enthalpy?Enthalpy in thermodynamics is a measure of the heat content of a chemical or physical system.
Enthalpy is the sum of the internal energy and pressure times volume It can be calculated using the following formula:
H = E + P V
Where;
H = Enthalpy
E = internal energy
P = pressure
V = volume
However, the enthalpy of a substance is usually measured under standard temperature and pressure.
The standard temperature is 273 Kelvin or KThe standard pressure is 1kPaLearn more about enthalpy at: https://brainly.com/question/13996238
#SPJ1
PLLLEEEAAASEEEE ANSWER QUICK. WHOEVER IS FAST AND RIGHT GETS BRAINLY
What can be done to double the power output of an object?
Neither of these
Both of these
Take half the time to do the work
Double the work done by the object
A boy of mass 60 kg and a girl of mass 40 kg are together and at rest on a frozen pond and push each other apart. The girl moves in a negative direction with a speed of 3 m/s. What must be the total final momentum of the boy and girl combined?
A. 120 kgm/s
B. -100 kgm/s
C. 0 kgm/s
D. -120 kgm/s
The aggregate ultimate momentum of the boy and girl must be 0 kgm/s (option C).
Conservation of momentum:
According to the principle of momentum conservation, momentum is only modified by the forces acting as they are outlined by Newton's equations of motion; momentum is never generated nor destroyed inside a problem domain.
Example- A bullet leaves the pistol when it is fired and picks up speed. The gun recoils to maintain the system's motion. After the pistol is discharged, the total momentum of the pistol and the bullet will be zero in accordance with the law of conservation of momentum.What is Momentum?
A characteristic of a moving body that it possesses due to its mass and motion and is equal to the sum of its mass and speed.
Therefore, according to the momentum conservation law, it can be concluded that the aggregate end momentum of the boy and girl must be 0 kgm/s (option C).
Learn more about momentum here:
https://brainly.com/question/4956182
#SPJ1
The following is the reaction showing the complete neutralization of calcium hydroxide (a base) with phosphoric acid:
3Ca(OH)2(aq) + 2H3PO4(aq) → Ca3(PO4)2(s) + 6H2O(ℓ)
A stock solution of calcium hydroxide (base) is made by dissolving 3.51 grams of it into some water and the volume is brought to 750 mL. A 50.0 mL portion of that stock solution is then titrated with a solution of 0.229 M phosphoric acid. How many milliliters (mL) of the acid are needed to completely neutralize the base in this reaction? (tolerance is ±0.1 mL)
9.17 milliliters (mL) of the acid are needed to completely neutralize the base in this reaction.
What is a neutralization reactionA neutralization reaction is a reaction between an acid and a base to produce a salt and water only.
The process of reacting given volume of acids or bases to determine the concentration or volume of either the acid or base required for neutralization is known as titration in volumetric analysis.
The formula to determine the volume of the acid required is given below:
[tex]\frac{C_{a}V_{a}}{C_{b}V_{b}} = \frac {N_{a}}{N_{b}}[/tex]
where [tex]V_{a[/tex] is the volume of acid required
[tex]V_{a} = \frac {C_{b}V_{b}N_{a}}{C_{a}N_{b}}[/tex]
Concentration of base, Cb = (3.51/74)/0.75 = 0.063 M
Vb = 50. 0 mL
Ca = 0.229 M
Na = 2
Nb = 3
Va = (0.063 * 50 * 2)/(0.229 * 3)
Va = 9.17 mL
In conclusion, the volume of the acid is determined from the concentration, volume and mole ratio of the reaction.
Learn more about titration at: https://brainly.com/question/186765
#SPJ1
A bottle of Nitroglycerin has the labeled strength of l/200 grains. What would this strength be in milligrams
strength in milligrams is 0.3mg
What is Strength?Mass of the solute in grams/Volume of the solution in litres equals the strength of the solution. The overall formula must be multiplied by 1000 if the volume is measured in millilitres (mL). The concentration of the solution, measured in grammes per litre, can be used to determine the solution's strength.
Molarity - The moles of solute per litre of solution is measured as molarity. For instance, when table salt is dissolved in water, water serves as both the solution and the solute. Sodium chloride weights 58.44 grammes per mole. One molar solution, or 1M, is created by dissolving 58.44 grammes of sodium chloride in one litre of water.
Relation between Molarity and Strength?
The volume of solute in one litre of a solution determines its strength. As a result, a solution's strength is calculated by multiplying its molecular mass by its molarity.
1 grain = 64.8 milligrams.
1/200 grains = 64.8/200
= 0.3mg
to know more about Molarity and Strength go to - https://brainly.com/question/1395425
#SPJ4
Which compound is not required for the oxidative decarboxylation of pyruvate to form acetyl-coa?
The compound that is not required for the oxidative decarboxylation of pyruvate to form acetyl-CoA is ATP.
What is oxidative decarboxylation?The chemical process of oxidative decarboxylation is an oxidative process where carboxylate groups are eliminated to form CO2.
The process of oxidative decarboxylation is associated with cellular respiration, which generates ATP as a product (instead of reactant).
In conclusion, the compound that is not required for the oxidative decarboxylation of pyruvate to form acetyl-CoA is ATP.
Learn more about oxidative decarboxylation here:
https://brainly.com/question/24278166
#SPJ1
Which of these is the byproduct of fuel combustion that may result in death if such combustion equipment is not properly vented.
a. radon
b. lead
c. oxygen
d. carbon monoxide
Carbon monoxide is the byproduct of fuel combustion that may result in death if such combustion equipment is not properly vented and is denoted as option D.
What is Carbon monoxide?This is a compound which is derived from the combustion of carbon in insufficient supply of oxygen. Carbon monoxide when inhaled replaces the oxygen content in the body which is dangerous because oxygen is needed for the survival of the cells of the body.
The carbon monoxide is usually formed when there is no properly vent thereby resulting in insufficient supply of air. This therefore results in its presence in the body results in the death of cells of the body system.
This is therefore the reason why carbon monoxide was chosen as the most appropriate choice.
Read more about Carbon monoxide here https://brainly.com/question/25350361
#SPJ1
Half-life expressions can be derived from?
Different half-life expressions can be chemically derived from integrated rate laws.
What are integrated rate laws?In chemistry, the expression 'integrated rate laws' makes reference to the integration of different rate laws.
The constant rate refers to the specific amount of a given substrate or reactant that is used in a chemical reaction to produce a specific amount of product during such reactions.
The constant rate is very useful to determine the time required to generate a given amount of a product in a given chemical reaction (expressed per unit of time).
In conclusion, different half-life expressions can be chemically derived from integrated rate laws.
Learn more about integrated rate laws here:
https://brainly.com/question/16021790
#SPJ1
A teacher divides her class into four groups. She assigns
each group the task of measuring the temperature of a
given object three times. The teacher already knows that
the temperature of the object is 31°C.
Based on each group's results, which group makes the most precise
measurements of the object's temperature?
A. Group A: 31.0°C, 32.0°C, 30.0°C
B. Group B: 29.5°C, 33.0°C, 31.8°C
C. Group C: 32.1°C, 31.9°C, 31.8°C
D. Group D: 29.0°C, 35.0°C, 32.0°C
The group that makes the most precise measurements of the object's temperature is Group C : 32.1°C, 31.9°C, 31.8°C. That is option C.
What is a precise measurement?Precise measurement are those values that are gotten during a measurement which when compared are closest to the given constant value.
Precision refers to a value in decimal numbers after the whole number, and it does not relate with accuracy.
From the measurement gotten from the different groups, the results that are precise are the results of group C.
This is so because,
32.1-31 = 1.131.9-31 = 0.931.8- 31 = 0.8All the values gotten are in decimals as stated above. Therefore, the group that makes the most precise measurements of the object's temperature is Group C.
Learn more about accuracy here:
https://brainly.com/question/5792909
#SPJ1
Treatment of DCS may involve: Select one: In-water recompression. Administration of pure oxygen. Recompression in a hyperbaric chamber. Both the second and third answers are correct.
Treatment of DCS may involve Recompression in a hyperbaric chamber.
Hence, Option (3) is correct answer.
What is DCS ?DCS is Decompression Sickness which is followed by recompression in a hyperbaric chamber. They prevent long term effects. It is also known as generalized barotrauma. It occur mostly in Scuba divers.
What are the Sign and Symptoms of DCS ?The sign and symptoms of DCS are
Skin itchShortness of breathA blotchy rashPain in joints or armDizzinessThus from the above conclusion we can say that Treatment of DCS may involve Recompression in a hyperbaric chamber.
Hence, Option (3) is correct answer.
Learn more about the DCS here: https://brainly.com/question/7747201
#SPJ4
How does the phase diagram of a substance illustrate the relationship between temperature and kinetic energy of molecules
A phase diagram combines plots of pressure versus temperature for the liquid-gas, solid-liquid, and solid-gas phase-transition equilibria of a substance.
What is a Phase diagram ?These diagrams indicate the physical states that exist under specific conditions of pressure and temperature, and also provide the pressure dependence of the phase-transition temperatures (melting points, sublimation points, boiling points).
At low temperatures, most substances are solid; as the temperature increases, they become liquid; at higher temperatures still, they become gaseous.The phase change between a liquid and a gas has some similarities to the phase change between a solid and a liquid.Learn more about Phase diagram here:
https://brainly.com/question/16935089
#SPJ4
Which color change represents a positive reaction for the presence of sugar using the Benedict's test
Answer:
my best answer is blue
Explanation:
PLEASE HELP THANKSS-
How does a heterogeneous mixture differ from a homogeneous mixture? How are they similar?
A homogenous mixture has uniformly dispersed components while a heterogeneous mixture does not.
Homogenous vs heterogeneous mixturesFirst of all, both homogenous and heterogenous mixtures consist of 2 or more non-reacting chemical components.
In homogenous mixtures, the chemical components are uniformly dispersed throughout the entire mixture.
In heterogeneous mixtures, the reverse is the case. The components are not uniformly dispersed. They are skewed to a particular side.
More on mixtures can be found here: https://brainly.com/question/24898889
#SPJ1
In which form are water molecules most closely bonded to each other?
Answer:
In solid
Explanation:
As a solid has very tightly packed molecules which move very difficulty and only vibrate
why is fruit cake a heterogeneous mixture ??
The table shows columns that brenda uses for her notes on the properties of elements. her notes state that some elements can react to form basic compounds. a 3-column table with 2 rows. the first row has entries metals, metalloids, nonmetals. the second row has entries nothing, nothing, nothing. where should brenda place this property in her table? only in the column for metalloids only in the column for nonmetals in the columns for metalloids and for nonmetals in the columns for metals and for metalloids
The element should be placed in the column for metalloids. Option A
What is the property of metals?We know that the properties of metals can be used to identify an unknown substances as a metal. We know that metals are able to react with acids to liberate the metal salt and hydrogen gas. Metals do not react with bases because they can not accept electrons.
Metalloids are generally amphoteric in nature. They can react with both the acid and the basses to form compounds. The nonmetals do not react with acid or base.
Looking at the result, we are told that the entry in the second row have the entries nothing, nothing, nothing. If this is the outcome, then it follows that the element should be placed in the column for metalloids.
Learn more about metalloids:https://brainly.com/question/2548493
#SPJ1
Answer: A
Explanation:
Which law states that the volume of a gas is proportional to the moles of the gas when pressure and temperature are kept constant?
Boyle’s law
Dalton’s law
Charles’s law
Avogadro’s law
The law that states that the volume of a gas is proportional to the moles of the gas when pressure and temperature are kept constant is Avogadro’s law. That is option D.
What is Avogadro’s law?Avogadro’s law states that the volume of a gas is proportional to the moles of the gas when pressure and temperature are kept constant.
Mathematically the Avogadro’s law can be represented by the following:
V1/n1= V2/n1
Where,
V1 = first volume
n1 = first amount of gas
V2 = second volume
n2 = second amount of gas
Learn more about gas laws here:
https://brainly.com/question/25587265
#SPJ1
Answer:D
Explanation:Trust me bro
please help me with this questio
The mass of the precipitate is 8.74 g and the concentration of the calcium nitrate is 0.061 M.
What mass of precipitate is formed?The reaction is given by; 2AgNO3(aq) + CaCl2 (aq) ------>2AgCl(s) + Ca(NO3)2(aq)
Number of moles of AgNO3 = 195/1000 * 0.500 = 0.0975 moles
Number of moles of CaCl2 = 305/1000 * 0.100 = 0.0305 moles
If 2 moles of AgNO3 reacts with 1 mole of CaCl2
0.0975 moles reacts with 0.0975 moles * 1 mole / 2 moles = 0.04875 moles
Thus CaCl2 is the limiting reactant.
1 mole of CaCl2 produces 2moles of AgCl
0.0305 moles produces 0.0305 moles * 2 moles/ 1mole
= 0.061 moles
Mass of precipitate = 0.061 moles * 143.32 g/mol
= 8.74 g
Now 1 mole of CaCl2 produces 1 mole of Ca(NO3)2
Total volume of solution = 195 ml + 305 ml = 500 ml or 0.5 L
Concentration of Ca(NO3)2 = 0.0305 moles/ 0.5 L
= 0.061 M
Learn more about stoichiometry:https://brainly.com/question/9743981
#SPJ1
What amino acid is formed using the n-phthalimidomalonic ester synthesis when the following alkyl halides are used in the third step?.
Threre are two amino acid is formed using the n-phthalimidomalonic ester synthesis when the following alkyl halides are used in the third step -
a. leucine
b. methionine
What is Gabriel malonic ester synthesis?
A reaction that enables us to generate amino acids is the Gabriel synthesis, also referred to as the Gabriel malonic ester synthesis. We can convert primary alkyl halides into primary amines using this procedure. Remember that 19 of the 20 amino acids are actually primary amines.Who should not take methionine?
Supplemental methionine shouldn't be used by people with the genetic condition homocystinuria type I. Methionine can become more homocysteine if you take methionine supplements without getting enough folic acid, vitamin B-6, or vitamin B-12. Your risk of heart disease could rise as a result.What does leucine do in the body?
Leucine is an essential amino acid for protein synthesis. Additionally, similarly to other amino acids, the carbon skeleton of leucine can be used to generate ATP. However, leucine can also regulate several cellular processes such as protein synthesis, tissue regeneration, and metabolism.Learn more about Gabriel malonic ester synthesis
brainly.com/question/27182757
#SPJ4
The complete question is -
What amino acid is formed using the N-phthalimidomalonic ester synthesis when the following alkyl halides are used in the third step?
a. Ch3Ch(Ch3)Ch2-Br
b. Ch3SCh2Ch2-Br