In Part A of this Experiment, which direction did the equilibrium shift when water was added? Explain what caused this shift. Keep in mind that water is not included in the K expression. It may be helpful to examine the hydrolysis of the SbCl3 in your lab manual. K is the equilibrium constant Q Is the reaction quotient Equilibrium shifts remains the same; Q=K Equilibrium shifts in the reverse direction; Q K. The equilibrium shifts in the direction with more moles of aqueous products O Equilibrium shifts in the forward direction; Q< K. The equilibrium shifts in the direction with more moles of aqueous products o Equilibrium shifts in the reverse direction; Q > K. The equilibrium shifts in the direction with less moles of aqueous products

For the molecular formula of aspartame, the artificial sweetener marketed as NutraSweet, is [tex]C_{14}H_{18}N_2O_5[/tex],

a. the molar mass of aspartame is 294.30 g/mol.

b. there are 3.40 x [tex]10^{-6}[/tex] moles of aspartame in 1.00 mg of aspartame.

c. there are 2.05 x [tex]10^{18}[/tex] molecules of aspartame in 1.00 mg of aspartame.

d. the total number of hydrogen atoms in 1.00 mg of aspartame is 34 hydrogen atoms.

a. The molar mass of aspartame can be calculated by adding up the atomic masses of all its atoms:

Molar mass of aspartame = (14 x 12.01 g/mol) + (18 x 1.01 g/mol) + (2 x 14.01 g/mol) + (5 x 16.00 g/mol) = 294.30 g/mol

Therefore, the molar mass of aspartame is 294.30 g/mol.

b. The number of moles of aspartame present in 1.00 mg of aspartame can be calculated using the formula:

moles = mass/molar mass

moles = 1.00 mg / 294.30 g/mol = 3.40 x 10^-6 mol

Therefore, there are 3.40 x 10^-6 moles of aspartame in 1.00 mg of aspartame.

c. The number of molecules of aspartame present in 1.00 mg of aspartame can be calculated using Avogadro's number:

number of molecules = moles x Avogadro's number

number of molecules = 3.40 x [tex]10^{-6}[/tex] mol x 6.02 x [tex]10^{23}[/tex] molecules/mol = 2.05 x [tex]10^{18}[/tex] molecules

Therefore, there are 2.05 x 10^18 molecules of aspartame in 1.00 mg of aspartame.

d. The number of hydrogen atoms present in 1.00 mg of aspartame can be calculated as follows:

There are 14 carbon atoms in 1.00 mg of aspartame, and each carbon atom is bonded to two hydrogen atoms. Therefore, there are 28 hydrogen atoms bonded to carbon atoms.

There are 2 nitrogen atoms in 1.00 mg of aspartame, and each nitrogen atom is bonded to three hydrogen atoms. Therefore, there are 6 hydrogen atoms bonded to nitrogen atoms.

There are 5 oxygen atoms in 1.00 mg of aspartame, and each oxygen atom is not bonded to any hydrogen atoms.

Therefore, the total number of hydrogen atoms in 1.00 mg of aspartame is 28 + 6 + 0 = 34 hydrogen atoms.

Learn more about the molecular formula of aspartame at

https://brainly.com/question/26876807

#SPJ4

The pinacol rearrangement is a well-known organic reaction that involves the rearrangement of vicinal diols, which are compounds that have two hydroxyl groups (-OH) attached to adjacent carbon atoms.

The reaction typically occurs under acidic conditions and results in the formation of ketones or aldehydes.

The mechanism of the pinacol rearrangement begins with protonation of one of the hydroxyl groups, usually the more acidic one, by an acid catalyst.

This protonation leads to the formation of a carbocation intermediate, which is a carbon atom with a positive charge due to the loss of a proton.

The adjacent hydroxyl group then attacks the carbocation, forming a carbon-oxygen bond and leading to the formation of a cyclic intermediate.

This cyclic intermediate is unstable and rearranges through migration of the alkyl group or hydrogen atom from the carbocation to the adjacent carbon atom, forming a new carbocation intermediate.

This rearrangement is typically facilitated by the presence of neighboring electron-withdrawing or electron-donating groups that stabilize the intermediate carbocation through resonance or inductive effects.

The rearranged carbocation intermediate is then deprotonated, leading to the formation of a ketone or an aldehyde, depending on the conditions and the specific structure of the starting compound.

The final product of the pinacol rearrangement is typically a ketone or an aldehyde with a carbonyl group (C=O) in the position where the original hydroxyl group was attached.

To learn more about carbonyl group, refer below:

https://brainly.com/question/13564853

#SPJ11

The pressure when the gas is pumped into a 5.00 L vessel that was initially enclosed in a 10.0 L tank at 1200 mm Hg pressure, as found by Boyle's Law is 2400mm Hg.

The ideal gas law Boyle's Law can be used to solve the problem.

Boyle's Law states that the pressure and volume of a gas are inversely proportional to each other, with all other parameters remaining constant. It can be represented as:

P₁V1 =P₂V2

Where, P₁ = initial pressure, V1 = initial volume, P₂ = final pressure, V2 = final volume.

The amount of gas and temperature remains constant.

Initially, the gas is enclosed in a 10.0 L tank at 1200 mm Hg pressure.

Let's call it Tank1.

V1 = 10.0 L, P₁= 1200 mm Hg

For Tank2,

P₂ = ?, V2 = 5.00 L

Substitute the given values in the ideal gas law

P₁V1 = P₂V2

⇒ 1200 mm Hg × 10.0 L = P₂ × 5.00 L

⇒ 12000 = 5.00 x P₂

⇒ P₂ = 12000/5.00 mm Hg

⇒ P₂ = 2400 mm Hg

Therefore, the reasonable value for the pressure when the gas is pumped into a 5.00 L vessel is 2400 mm Hg.

To know more about Boyle's Law, refer here:

https://brainly.com/question/1437490#

#SPJ11

The best examples of foods within the protein group that can also increase intake of unsaturated fats are salmon, nuts, seeds, legumes. The correct option is (c).

Protein is a vital macro nutrient that is required to build and repair tissues, produce enzymes and hormones, and maintain healthy muscles and bones. Unhealthy fats can increase the risk of heart disease, stroke, and other chronic health problems. A diet that contains a good balance of carbohydrates, protein, and healthy fats is recommended for overall health and well-being. Unsaturated fats are a type of healthy fat that can improve heart health by reducing bad cholesterol levels and increasing good cholesterol levels.

Foods that are high in protein and unsaturated fats are ideal for promoting overall health and wellness. Salmon is a good source of protein and contains omega-3 fatty acids, which are a type of unsaturated fat that can reduce inflammation and improve brain function. Nuts and seeds are high in protein and also contain healthy fats that can help reduce the risk of heart disease and other chronic health problems. Legumes, such as lentils, beans, and chickpeas, are high in protein and fiber and also contain healthy fats that can help improve heart health.In conclusion, salmon, nuts, seeds, and legumes are the best examples of foods within the protein group that can also increase intake of unsaturated fats.

Therefore, Salmon, nuts, seeds, and legumes are the best examples of protein-rich meals that can also enhance unsaturated fat intake. The right option is (c).

Learn more about unsaturated fats on:

https://brainly.com/question/24186437

#SPJ11

The amount of 18M stock solution of sulfuric acid required to make 0.50 L of a 0.20 M dilution solution is about 0.4944L.

To make 0.50 L of a 0.20 M dilution, you need to figure out how many moles of sulfuric acid you'll require, then figure out how much of the 18 M stock solution contains that many moles of sulfuric acid. In the end, the volume of the solution can be calculated.

To calculate the number of moles required: n = MV = 0.50 × 0.20 = 0.10 mol

To determine the volume required:

V₁ = n₁/V₂

V₁ = (0.10 mol)/(18 M)

V₁ = 0.0056 L or 5.6 mL (using the unit conversion factor 1 L = 1000 mL)

Thus, 5.6 mL of 18 M stock sulfuric acid will be required to make a 0.50 L solution with a 0.20 M concentration. To prepare a 0.20 M solution, it is required to dilute the sulfuric acid aliquot with water. The volume of the water required is equal to the total volume minus the amount of stock solution that you'll use. As a result, the volume of water required is:

Vwater = Vtotal - Vstock

Vwater = 0.50 L - 0.0056 L

Vwater = 0.4944 L

Learn more about Volume here:

https://brainly.com/question/1578538

#SPJ11

The chemical equation for HF (aq) showing how it is an acid according to the Arrhenius definition is [tex]HF(aq) + H_2O(l)[/tex] ⇒ [tex]H_3O^+(aq) + F^-(aq)[/tex].

In this equation, HF is a weak acid that partially ionizes when dissolved in water, and the [tex]H_2O[/tex] acts as a base.

The reaction produces the hydronium ion [tex]H_3O^+[/tex]and the fluoride ion [tex]F^-[/tex]which are responsible for the acidic properties of the solution.

The phases in this equation are aqueous (aq) for HF,  [tex]H_3O^+[/tex] and [tex]F^-[/tex], and liquid (l) for water.

Hence , [tex]HF(aq) + H_2O(l)[/tex] ⇒ [tex]H_3O^+(aq) + F^-(aq)[/tex] is a chemical equation for HF.  The reaction shows that when HF is dissolved in water, it gives [tex]H3O^+[/tex]and [tex]F^-[/tex]ions. The[tex]H3O^+[/tex] ion is the hydrated hydrogen ion or the hydronium ion, and [tex]F^-[/tex]is the fluoride ion.

Thus, the given chemical equation represents the Arrhenius acid-base reaction of HF.

To know more about Acid refer here :

https://brainly.com/question/25148363

#SPJ11

To determine which area you should settle in after completing your degree, you should consider the average concentrations of Radon-222 in each of the areas you are considering. Radon-222 is a naturally occurring, radioactive gas that is released from the ground and can have a large impact on human health if present in high enough concentrations. Generally, the highest average concentrations of Radon-222 in the United States are found in the Appalachian region, especially in the states of Pennsylvania, West Virginia, Maryland, and parts of Virginia and New York. Therefore, settling in one of these areas would expose you to the highest concentrations of Radon-222.

As per the given statement, "You've been considering what part of the United States to settle in after you complete your degree. You just learned about radon-222.

Which of these areas you are considering would expose you to the highest concentration?

"If someone is thinking of settling in the United States after completing their studies and is concerned about exposure to radon-222, the area that would expose them to the highest concentration would be the area with the most uranium-rich soil.

What is radon-222?

Radon-222 is a radioactive gas that is colorless, tasteless, and odorless. Radon-222 is one of the primary decay products of radium-226, which is formed by the decay of uranium-238. Radon-222, in turn, decays to form polonium-218 and other radioactive particles that can damage lung tissue. Therefore, the area with the most uranium-rich soil would expose an individual to the highest concentration of radon-222.

For more details follow this link: https://brainly.com/question/20527349

#SPJ11

To prepare 15 ml of a 0.25 M CaCl₂ solution using deionized water and CaCl₂ salt, the following steps must be followed.

1. Calculate the amount of CaCl₂ salt needed:
Moles = Molarity * Volume (L)

Moles = 0.25M x 0.015L = 0.003750 moles

Mass of CaCl₂ salt = 0.003750 x 110.98 g/mol = 0.41637 g

2. Measure out 0.41637 g of CaCl₂ salt and add it to a clean beaker.

3. Measure out 15 ml of deionized water and add it to the beaker with the CaCl₂ salt.

4. Stir the mixture until the CaCl₂ salt has fully dissolved.

5. The solution is now ready to use.

It is important to remember to use caution when handling and measuring the chemicals and to always wear safety goggles and gloves when working with chemicals.

To know more about CaCl₂ solution, refer here:

https://brainly.com/question/28950352#

#SPJ11

The correct answer is that a 2-ketohexose has three chirality centers, one at each of the carbon atoms numbered 3, 4, and 5.

A 2-ketohexose is a six-carbon sugar with a ketone functional group at the second carbon atom. In general, a chirality center, also known as a stereocenter, is an atom in a molecule that is bonded to four different substituents, resulting in two or more non-superimposable mirror image structures. For a six-carbon sugar, there are typically four chirality centers, one at each of the carbon atoms numbered 2, 3, 4, and 5. However, in a 2-ketohexose, the ketone functional group at carbon 2 eliminates the chirality center at that carbon, resulting in only three chirality centers at carbon atoms 3, 4, and 5. Therefore, a 2-ketohexose has three chirality centers, one at each of the carbon atoms numbered 3, 4, and 5.

To learn more about chirality centers click the link below

brainly.com/question/29842209

#SPJ4

The density of carbon monoxide gas at 20°C and 98 kPa is 1.145 g/L.

The ideal gas law is PV = nRT

where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature in kelvin.

To find the density of carbon monoxide gas at 20°C and 98 kPa, we can use the ideal gas law to find the number of moles of gas in 1 L of gas at these conditions and then divide the mass of 1 mole of gas by the number of moles to get the density.

First, we need to convert the temperature to kelvin:

20°C + 273.15 = 293.15 K

Rearranging the ideal gas law, we get:

n = PV/RT

We can assume that the volume is 1 L, so:

n = (98 kPa)(1 L) / [(0.0821 L·atm/mol·K)(293.15 K)] = 0.0413 mol

The molar mass of carbon monoxide is 28.01 g/mol, so the mass of 0.0413 mol is:

0.0413 mol x 28.01 g/mol = 1.152 g

Therefore, the density of carbon monoxide gas at 20°C and 98 kPa is:

1.152 g / 1 L = 1.145 g/L

What is density?

Density is a physical property of matter that relates to the amount of mass per unit of volume of a substance. It is typically expressed in units such as grams per cubic centimeter (g/cm³) or kilograms per cubic meter (kg/m³).

To know more about density, visit:

https://brainly.com/question/29775886

#SPJ1

The correct equation that correctly represents the chemical equation associated with the enthalpy of the formation of nitrogen dioxide gas is "½ N2(g) + O2(g) → NO2(g)".

Nitrogen dioxide is a chemical compound with the chemical formula NO2. It is a gas with a sharp, biting odor and is a prominent air pollutant. It is one of the principal oxides of nitrogen.

The enthalpy of formation (ΔHf°) of nitrogen dioxide gas, NO2, is 33.8 kJ/mol. Enthalpy of formation is defined as the amount of energy liberated or absorbed when a compound is formed from its constituent elements under standard conditions.

Here, ½ N2(g) + O2(g) → NO2(g) is the equation that correctly represents the chemical equation associated with this enthalpy of formation. The energy absorbed or released in the formation of one mole of nitrogen dioxide from 1/2 mole of nitrogen gas and one mole of oxygen gas is 33.8 kJ/mol.

You can learn more about enthalpy of formation at: brainly.com/question/14563374

#SPJ11

The given substances are listed as follows strong acids as HCIO, HI; weak acids as [tex]CH_3COOH[/tex], [tex]CH_3NH_2[/tex], HCOOH, HF; strong bases as KOH, CSOH and weak bases as [tex]NH_3(CH_3)_2NH[/tex].

Substances are classified into four types strong acids, weak acids, strong bases, and weak bases.

Learn more about strong acids: https://brainly.com/question/30900251

#SPJ11

The protons, neutrons, and electrons are the three subatomic particles. Although electrons orbit the nucleus in various energy levels or shells, protons and neutrons are found inside the nucleus.

The three essential subatomic particles that make up an atom are protons, neutrons, and electrons. The neutral neutrons, which have no charge, and protons, which have a positive charge, are both present in the nucleus. The atomic number and identity of an element are determined by the quantity of protons in an atom. Although being negatively charged, electrons circle the nucleus in various energy levels or shells. An atom's chemical characteristics and behaviour are determined by its electron configuration. While the protons and neutrons in the nucleus contribute to the atomic mass, the electrons in the outermost shell are engaged in chemical processes. Studying the characteristics of matter requires an understanding of how these subatomic particles are arranged.

learn more about subatomic here:

https://brainly.com/question/13303285

#SPJ4

Given data,

Experiment [I] [S2O8] Initial Rate (M/s) 3 0.21 0.27 0.38 2.05 2 0.40 0.38 3.06 0.40 0.22 1.76 1 3We are given with the initial rate of reaction and concentration of iodide ion (I) and peroxy disulfate ion (S2O8). We have to determine the rate law expression for the reaction.

Based on the data, we can write the rate law expression,

rate = k [I]^n [S2O8]^m

The order of the reaction for each reactant can be determined by comparing the change in initial rate when the concentration of each reactant is changed. For example, when the concentration of [I] is increased from 0.21 M to 0.40 M, the initial rate of reaction increases from 0.27 M/s to 2.05 M/s;

therefore, we can write:

[I] order = (log(2.05 M/s) - log(0.27 M/s)) / (log(0.40 M) - log(0.21 M))= 1Similarly, the order of reaction with respect to S2O8 is:[S2O8] order = (log(2.05 M/s) - log(0.27 M/s)) / (log(2.0 M) - log(0.21 M))= 1

The overall order of the reaction is the sum of the individual order of each reactant:n + m = 1 + 1 = 2

Thus, the rate law expression for the given reaction rate = k [I]^1 [S2O8]^1 = k [I] [S2O8]

rate = k[I] [S2O8]

Learn more about rate law at brainly.com/question/30379408

#SPJ11

The chemoautotroph thiobacillus can obtain energy from the oxidation of arsenic (As3 → As5) by oxidizing arsenic.

A chemoautotroph obtains energy from chemical compounds, including inorganic molecules like iron, sulfur, and nitrogen, rather than light energy like autotrophs or heterotrophs. They are capable of synthesizing their organic molecules from carbon dioxide.CO2 through the process of chemosynthesis, which uses energy from the oxidations of inorganic compounds. These organisms are found in various ecosystems, such as deep-sea vents, sulfur-rich hot springs, and underground oil reserves.

Thiobacillus is one such chemotroph that uses various sulfur-containing compounds as its energy source. They also oxidize arsenic and obtain energy by oxidizing it from As3 to As5. It is accomplished using a chain of enzymes that carry out the oxidation process.

Learn more about inorganic compounds at:

https://brainly.com/question/17271491

#SPJ11

As the molar mass calculated is 24.90 g/mol, hence the gas is most likely to be NO.

The ratio between mass and the amount of substance of any sample is called molar mass.

To determine whether the gas is NO, NO2, or N2O5, we need to calculate the molar mass of the gas and compare it to the molar masses of these three possible gases.

n = PV/RT

Given, P = 760.0 mmHg, V = 250.0 mL = 0.2500 L, T = 17.00°C + 273.15 = 290.15 K, and R = 0.08206 L atm/mol K.

So, n = (760.0 mmHg)(0.2500 L)/(0.08206 L atm/mol K)(290.15 K) = 0.01003 mol

M = m/n

Given m = 0.2500 g.

M = 0.2500 g/0.01003 mol = 24.90 g/mol

Comparing this molar mass to the molar masses of NO (30.01 g/mol), NO2 (46.01 g/mol), and N2O5 (108.01 g/mol), we see that the gas is most likely NO.

To know more about molar mass, refer

https://brainly.com/question/837939

#SPJ1

Note: The question given on the portal is incomplete. Here is the complete question.

Question: A 250.0-mL flask contains 0.2500 g of a volatile oxide of nitrogen. The pressure in the flask is 760.0 mmHg at 17.00°C. Is the gas NO, NO2, or N2O5?

The kinetic energy of one molecule of hydrogen (H2) at 300 K is equal to the product of its mass and the square of its velocity. The mass of one molecule of hydrogen is 2.02 x 10^-23 kg, and the velocity of a molecule of hydrogen at 300 K is 1.93 x 10^3 m/s. Therefore, the kinetic energy of one molecule of hydrogen at 300 K is equal to 2.02 x 10^-23 x (1.93 x 10^3)^2 = 7.4 x 10^-15 J.

To explain this in further detail, kinetic energy is the energy associated with an object in motion. It is calculated by the formula KE = 1/2 mv^2. For an object of mass m and velocity v, the kinetic energy is equal to one half of the product of its mass and the square of its velocity. Therefore, the kinetic energy of an object is directly proportional to the square of its velocity.

In the case of a molecule of hydrogen (H2) at 300 K, its mass is 2.02 x 10^-23 kg and its velocity is 1.93 x 10^3 m/s. Therefore, the kinetic energy of one molecule of hydrogen at 300 K is equal to 2.02 x 10^-23 x (1.93 x 10^3)^2 = 7.4 x 10^-15 J.

Know more about kinetic energy here:

https://brainly.com/question/26472013

#SPJ11

Explanation:

Identify the substance: Determine the identity of the substance that is being measured in moles.

Determine the molar mass: Look up the molar mass of the substance in a periodic table or a reference book. The molar mass is expressed in grams per mole.

Set up the conversion factor: Use the molar mass to set up a conversion factor. The conversion factor is a ratio that relates the number of moles to the number of grams.

Example: If the molar mass of the substance is 50 g/mol, the conversion factor would be:

1 mol / 50 g

This means that one mole of the substance is equal to 50 grams.

Apply the conversion factor: Multiply the given quantity, expressed in moles, by the conversion factor. The moles unit will cancel out, leaving the unknown quantity in grams.

Example: If the given quantity is 2 moles of the substance, the calculation would be:

2 mol x (1 mol / 50 g) = 0.04 g

Therefore, the unknown quantity is 0.04 grams.

Check the units: Always double-check that the units of the final answer are correct. In this case, the units should be in grams

If the strength of magnet 1 is weaker than the strength of magnet 2, then the overall kinetic energy in the system would increase. This is because the weaker magnet would exert less force on the magnetic object, causing it to accelerate more and gain more kinetic energy as it approaches the stronger magnet.

In the above scenario, the magnetic force between two magnets causes a magnetic object to accelerate, which in turn creates kinetic energy.

When the magnetic object is placed between the two magnets, the stronger magnet exerts a stronger magnetic force on the object, causing it to accelerate towards the stronger magnet.

At the same time, the weaker magnet also exerts a magnetic force on the object, albeit a weaker one. As a result, the object experiences a net force towards the stronger magnet, which causes it to accelerate and gain kinetic energy as it moves closer to the magnet with higher magnetic strength.

Learn more about Magnet on:

https://brainly.com/question/2841288

#SPJ1

The student's answer N₂ + 2H₂ is not correct because it doesn't balance the charges of the reactants and products. The reactants have no charge, but the product NH3 has a negative charge of 2-.

In a chemical reaction, reactants are the starting materials that undergo a chemical change or reaction to produce one or more new substances called products. The reactants are written on the left-hand side of the chemical equation, while the products are written on the right-hand side. For example, in the reaction between hydrogen gas (H2) and oxygen gas (O2) to form water (H2O), the reactants are H2 and O2, and the product is H2O. The balanced chemical equation for this reaction is:

2H2 + O2 → 2H2O

In this equation, two molecules of hydrogen react with one molecule of oxygen to produce two molecules of water.

To know more about reactants visit :

https://brainly.com/question/17096236

#SPJ1

The number of moles of nitrogen atoms present in the sample is: 12.86 mol of nitrogen atoms

At STP (Standard Temperature and Pressure), the temperature is 273 K and the pressure is 1 atm. The molar volume of any ideal gas at STP is 22.4 L/mol. Therefore, the number of moles of N204 gas present in the sample can be calculated as:

n = V/VM

where n is the number of moles, V is the volume of the gas, and VM is the molar volume of the gas at STP.

n = 144 L / 22.4 L/mol = 6.43 mol

Since dinitrogen tetroxide contains two nitrogen atoms per molecule, the number of moles of nitrogen atoms present in the sample is:

2 x 6.43 mol = 12.86 mol of nitrogen atoms.

To know more about atoms click here:

brainly.com/question/29695801

#SPJ4

Answer:

Option D

Explanation:

Ionization energy increases left to right in a period and decreases top to bottom in a groups.

Ar is in Group 13

S is in Group 15

P is in Group 16

Al is in Group 18

They are all in the same period so decide by the group numbers if left is the highest (group 18) and right (group 13) is the lowest.

The order: Ar, S, P, Al

Hope this is clear. Good luck with chemistry! :)

The amount of heat released by the 80 g sample of water is approximately 6694.4 J.

To calculate the amount of heat released by the 80 g sample of water, we can use the specific heat capacity of water and the formula:

Q = m * c * ΔT

where Q is the amount of heat released, m is the mass of the water, c is the specific heat capacity of water, and ΔT is the change in temperature.

The specific heat capacity of water is 4.184 J/g°C.

The change in temperature is:

ΔT = 95°C - 75°C = 20°C

Substituting the given values, we have:

Q = 80 g * 4.184 J/g°C * 20°C = 6694.4 J

Therefore, the amount of heat released by the 80 g sample of water is approximately 6694.4 J.

learn more about heat capacity here

https://brainly.com/question/21406849

#SPJ1

We must first determine how many moles of Mg(OH)2 are in the solution in order to determine its molarity:

Compute Mg(OH)2's molar mass:

mol Mg = 24.31 g

O = 15.99 g/mol

H = 1.01 g/mol

Mg(OH)2 has a molar mass of 24.31 plus 2(15.99) plus 2(1.01), or 58.33 g/mol.

Determine how many moles of Mg(OH)2 there are:

Mass / molar mass = number of moles

1.925 moles are obtained by multiplying 112.3 g by 58.33 g/mol.

Determine the solution's molarity:

Molarity is equal to the moles of solute per litre of solution.

Molarity = 1.925 moles/1.2 litres = 1.60 M

As a result, the molarity of the solution created by combining 1.2 L of water with 112.3 g of Mg(OH)2 is 1.60 M.

learn more about determine its molarity here:

https://brainly.com/question/26406499

#SPJ4

If yellow bromthymol blue is present, the solution is acidic. In an acidic solution, phenolphthalein, an acid-base indicator, is colourless; nevertheless, as the solution becomes alkaline, it turns pink or red.

An indicator, such as phenolphthalein, changes colour when it comes into contact with an acid or a basic. If it comes into contact with an acid like vinegar or a neutral substance like water, it remains colourless; if it comes into contact with something basic like ammonia, it turns purple.

The acid bromthymol blue is weak. Depending on the pH of the solution, it may take the form of an acid or a basic. This reagent turns blue in basic solutions and yellow in acidic solutions.

To know more about indicator visit:-

brainly.com/question/29016702

#SPJ1

To calculate the initial concentration of CO32- (aq), the student can use the measured value from part (f)

(i) to calculate the equilibrium concentration of HCO3- (aq) and OH- (aq)

according to the equilibrium expression: Kb = [HCO3-]eq [OH-]eq / [CO32-]eq.

The student can then use the equilibrium concentrations to calculate the initial concentration of CO32- (aq) by solving the equilibrium expression for [CO32-]eq.

The initial concentration of CO32- (aq) is equal to the sum of the equilibrium concentrations of HCO3- (aq) and OH- (aq).

to know more about equilibrium refer here:

https://brainly.com/question/30807709#

#SPJ11

The concentration of the original unknown protein solution that is  determined to be 0.3624 mg/ml in parts-per-million (ppm) = 362.4 ppm

To find the protein concentration in ppm (parts-per-million), first, we need to convert mg/mL to mg/L since 1 ppm is equal to 1 mg/L. Let's start solving this problem.

The concentration of the original unknown protein solution is given as 0.3624 mg/mL.

Conversion factor: 1 ppm = 1 mg/L.

To convert mg/mL to mg/L, we need to multiply the given concentration by 1000.mg/mL to mg/L conversion

= 0.3624 x 1000= 362.4 mg/L

Now, we need to use the ppm conversion factor to get the protein concentration in ppm.

Protein concentration in ppm = (protein concentration in mg/L/1) x 1 ppm

= (362.4 mg/L / 1) x 1 ppm

= 362.4 ppm

Therefore, the protein concentration is 362.4 ppm (parts-per-million)

Learn more about part per million here: https://brainly.com/question/16877061

#SPJ11

The net ionic equation for the reaction between [tex]Ba(OH)_2(aq) and H_2SO_^4 (aq)  is :2Ba^2^+(aq) + SO_4^2^-(aq) + 2H^+(aq) ⇒ 2Ba^2^+(aq) + 2H_2O[/tex]

When the following two solutions are mixed:

[tex]K_2CO_3(aq) + Fe(NO_3)_3(aq)[/tex], the mixture contains the following ions:

[tex]NO_3- (aq), Fe^3+, CO_3^ 2-, K^+[/tex]. The spectator ions are NO3- (aq) and K+, and the ions that react are Fe3+ and CO3 2-.

Hence , The correct net ionic equation, including all coefficients, charges, and phases, for the reactants [tex]Ba(OH)_2(aq) + H_2SO_4(aq) [/tex] is 2Ba^2^+(aq) + SO_4^2^-(aq) + 2H^+(aq) ⇒ 2Ba^2^+(aq) + 2H_2O[/tex] .
To know more about Ionic equation refer here :

https://brainly.com/question/11510759

#SPJ11

H2(g) + Cl2(g) --> HCl(g) Consider the unbalanced equation above. 3.70 L of H2 and 3.05 L of Cl2 are reacted under the same conditions of temperature and pressure. How many liters of HCl will be produced?

Solution: From the balanced chemical equation, we can see that 1 mol of H2 reacts with 1 mol of Cl2 to produce 2 moles of HCl. We are given the volume of both reactants, but the equation is not balanced. Therefore, let's balance the chemical equation:H2(g) + Cl2(g) → 2HCl(g)Balancing the above chemical equation shows that 1 mole of H2 reacts with 1 mole of Cl2 to produce 2 moles of HCl. At STP (Standard Temperature and Pressure), 1 mole of any gas occupies a volume of 22.4 L.3.70 L of H2 is: (3.70L / 22.4 L/mol) = 0.1652 mol H2.3.05 L of Cl2 is: (3.05L / 22.4 L/mol) = 0.1362 mol Cl2Since both the reactants are limiting, therefore the Cl2 is the limiting reactant because it has less amount than H2. So we use Cl2 to calculate the amount of product formed. According to the balanced chemical equation, 1 mol of Cl2 produces 2 moles of HCl.

Therefore,0.1362 mol Cl2 (2 mol HCl / 1 mol Cl2) = 0.2724 mol HCl The volume of HCl at STP is: (0.2724 mol HCl) (22.4 L/mol) = 6.1 L. Therefore, the volume of HCl produced when 3.70 L of H2 and 3.05 L of Cl2 are reacted under the same conditions of temperature and pressure is 6.1 liters.

Learn more about HCl production at: brainly.com/question/2946807

#SPJ11