If an object is moving to the left at a constant speed and you are rotating your eyes to the left at twice the speed, you will see the object moving:

If two stars have the exact same spectral class, then they must have similar temperatures, masses, and sizes. The spectral class of a star is determined by its surface temperature, which affects the colors and intensities of the electromagnetic radiation emitted by the star. This information is typically used to classify stars into seven different spectral types: O, B, A, F, G, K, and M, with O being the hottest and M being the coolest.

If a newly discovered stellar object is cooler than an M star, then it is probably a brown dwarf, a type of sub-stellar object that is too small to sustain nuclear fusion in its core. Brown dwarfs are often referred to as "failed stars" since they are too small to become full-fledged stars but too large to be classified as planets. Brown dwarfs emit very little visible light and instead radiate in the infrared part of the spectrum. They can be difficult to detect due to their low luminosity and can be identified using specialized instruments that are sensitive to infrared radiation.

In summary, the spectral class of a star provides information about its temperature, size, and mass, and stars with the same spectral class will have similar properties. A newly discovered stellar object that is cooler than an M star is likely a brown dwarf, a sub-stellar object that emits primarily in the infrared part of the spectrum.

for more such questions on temperature

https://brainly.com/question/26866637

#SPJ11

The period of one vibration of middle C, whose frequency is 256 Hz, is approximately 3.90625 milliseconds.

Frequency is the number of cycles or oscillations of a wave that occur in a unit of time, typically measured in hertz (Hz). It is a fundamental concept in physics and describes various phenomena, such as sound, light, and electromagnetic waves.

Vibration refers to a mechanical oscillation or movement of an object back and forth around a fixed point. It can be caused by various forces, such as sound waves, electrical currents, or physical impacts, and is a common phenomenon in everyday life.

According to the given information:

The period of one vibration of middle C, whose frequency is 256 Hz, is approximately 3.90625 milliseconds. This can be calculated using the formula T = 1/f, where T is the period in seconds and f is the frequency in hertz. Therefore, T = 1/256 Hz = 0.00390625 seconds = 3.90625 milliseconds.

To know more about  frequency, vibration visit:

https://brainly.com/question/30874850

#SPJ11

The energy of an individual photon in the given electromagnetic wave is approximately 3.31 x 10⁻¹⁹ joules (J).

The energy of a photon can be calculated using the formula:

E = hf

where E is the energy of the photon, h is Planck's constant, and f is the frequency of the electromagnetic wave.

Plugging in the given values, we get:

E = (6.626 x 10⁻³⁴ J s) x (5.00 x 10¹⁴ Hz)

= 3.31 x 10⁻¹⁹ J

Know more about photon here:

https://brainly.com/question/20912241

#SPJ11

D. A thrust fault is a special type of reverse fault.

In a thrust fault, the fault plane has a low angle, and the hanging wall moves upward relative to the footwall.

This movement is caused by compressional forces that push rocks together, leading to deformation.

The fault plane is usually at a low angle, and the overlying block moves horizontally relative to the underlying block.

In summary, a thrust fault is a type of reverse fault characterized by a low-angle fault plane and horizontal movement of the overlying block.

Summary: A thrust fault is best described as a special type of reverse fault (option D).

Learn more about  thrust fault click here:

https://brainly.com/question/16015838

#SPJ11

If a spinner that has a radius of 0.02 m and rotating at 106 rpm, the angular deceleration due to friction is  -0.616 radians/second².

To determine the angular deceleration due to friction of a spinner with a radius of 0.02 m rotating at 106 rpm and taking 18 seconds to stop, you need to first convert the rpm to radians per second.

1. Conversion of rpm to radians per second:
106 rpm × (2π radians / 1 revolution) × (1 min / 60 seconds)

= 11.1 radians/second

2. Calculate the angular deceleration (α):

α = (ω_final - ω_initial) / time

Since the spinner comes to a stop,

α = (0 - 11.1) / 18

α ≈ -0.616 radians/second²

Thus, the angular deceleration due to friction is approximately -0.616 radians/second².

Learn more about angular deceleration: https://brainly.com/question/7248105

#SPJ11

The Acceleration is the rate at which an object changes its velocity with respect to time. In one dimension, acceleration is measured as a change in velocity over a given time interval. In this scenario, a ball is rolling up and then down an incline. To sketch an acceleration diagram, we need to consider the direction of the acceleration.

The Since the ball is moving up and then down, the acceleration vector will be in the opposite direction to the velocity vector. Therefore, the acceleration diagram will show a downward vector during the uphill motion and an upward vector during the downhill motion. To sketch versus t, versus I, and a versus I graphs for the entire motion of the ball, we need to consider the direction of the coordinate system. If the positive x-direction is down the track, then the versus t graph will show a negative slope during the uphill motion and a positive slope during the downhill motion. The versus I graph will show a negative slope during the uphill motion and a positive slope during the downhill motion. The a versus I graph will show a negative acceleration during the uphill motion and a positive acceleration during the downhill motion. it will experience a negative acceleration, but it will still be moving forward. In this case, the coordinate system would be in the opposite direction to the motion of the car. If not, the negative acceleration would mean that the car is moving backward, which is not possible.

learn more about acceleration here.

https://brainly.com/question/29221599

#SPJ11

Since the box starts moving when a force is applied to it, we know that the force applied overcomes static friction, which is the force that keeps the box at rest. Once the box starts moving, it experiences kinetic friction, which opposes the direction of motion and is typically less than static friction.

Therefore, the fact that the box starts moving tells us that the force applied is greater than the force of static friction. We can use this information to infer that the coefficient of kinetic friction between the box and the floor is less than or equal to the coefficient of static friction.

This is because the force of friction is proportional to the coefficient of friction and the normal force between the box and the floor. The normal force remains constant, so if the force of kinetic friction were greater than the force of static friction, the box would continue to be at rest.

Therefore, we can say that the coefficient of kinetic friction is less than or equal to the coefficient of static friction. However, we cannot determine the exact value of either coefficient without additional information or measurements.

To learn more about static friction refer here:

https://brainly.com/question/13000653#

#SPJ11

The minimum magnitude of the magnetic force acting on the electron is zero.

When an electron is accelerated through a potential difference of 2,250 V, its final speed can be determined using the energy conservation principle. The energy gained by the electron equals the work done on it, which is given by:

qV = (1/2)mv^2

where q is the charge of the electron, V is the potential difference, m is the mass of the electron, and v is its final speed. Plugging in the values, we get:

(1.6 x 10^-19 C) x 2,250 V = (1/2) x (9.11 x 10^-31 kg) x v^2

Solving for v, we get:

v = 1.86 x 10^7 m/s

Once the electron enters the uniform magnetic field of 1.30 T, it will experience a magnetic force given by:

F = qvB

where B is the magnetic field strength. Plugging in the values, we get:

F_max = (1.6 x 10^-19 C) x (1.86 x 10^7 m/s) x 1.30 T = 4.0 x 10^-14 N

The minimum magnitude of the magnetic force occurs when the velocity of the electron is perpendicular to the magnetic field, in which case the force is given by:

F_min = qvBsin(90°) = 0.

For such more questions on  Magnetic force:

https://brainly.com/question/30563158

#SPJ11

Predicting the next date of a Landsat satellite pass over a specific location allows for effective monitoring of land cover, vegetation, and environmental changes.

The specific date for the next Landsat satellite pass over your location depends on the orbital parameters and the repeat cycle of the satellite. Landsat 7 and Landsat 8 satellites follow a near-polar sun-synchronous orbit with a repeat cycle of approximately 16 days.

By analyzing the satellite's orbit pattern, the approximate timing for its revisit can be estimated, facilitating targeted data collection and analysis.

Therefore, if the satellite passed over you on October 10th, the next pass is likely to occur around 16 days later, approximately on October 26th. However, it's important to note that exact dates may vary due to factors such as orbital adjustments and ground station scheduling.

To know more about the Landsat satellite refer here :

https://brainly.com/question/31821418#

#SPJ11

Assuming the gravitational force on the rocket is negligible, the maximum rate at which the rocket can expel gases is: V <= 7*m*g/e

To calculate the maximum rate at which the rocket can expel gases, we need to use the equation of motion for a rocket: F = m*a

where F is the force exerted by the expelled gases, m is the mass of the rocket and a is its acceleration.

The force exerted by the expelled gases can be expressed as: F = V*e

where V is the rate of gas expulsion (in volume per unit time) and e is the speed at which the gases are expelled.

Assuming the gravitational force on the rocket is negligible, we can set the net force on the rocket to be equal to the force exerted by the expelled gases:

F = V*e = m*a

Solving for V, we get: V = m*a/e

To find the maximum rate at which the rocket can expel gases, we need to find the maximum value of V that satisfies the condition that the rocket's acceleration cannot exceed seven times the gravitational acceleration on Earth (g = 9.81 m/s²).

a <= 7*g

Substituting this into the equation for V, we get: V = m*a/e <= 7*m*g/e

Therefore, the maximum rate at which the rocket can expel gases is: V <= 7*m*g/e

where m is the mass of the rocket and e is the speed at which the gases are expelled.

Note that this is an upper limit and the actual rate of gas expulsion may be lower due to other factors such as the design of the rocket engine and the properties of the fuel used.

More on maximum rate: https://brainly.com/question/31251506

#SPJ11

The mutual inductance between the two solenoids is 26.42 H.

The mutual inductance (M) between the two solenoids in the spark coil of an automobile can be calculated using the formula:

M = ΔV x Δt / ΔI

where:
- M is the mutual inductance,
- ΔV is the change in the voltage (emf) induced in the second solenoid (35 kV or 35,000 V),
- Δt is the time it takes for the current to fall (5.8 ms or 0.0058 s),
- ΔI is the change in current in the first solenoid (7.7 A - 0 A = 7.7 A).

Plugging in the values, we get:

M = (35,000 V) x (0.0058 s) / (7.7 A)
M = 26.42 H (Henry)

So, the mutual inductance between the two solenoids is approximately 26.42 H.

This value represents the degree of coupling between the two solenoids, as it quantifies how effectively a change in current in one solenoid induces a voltage in the other solenoid. In the case of a spark coil in an automobile, this high mutual inductance allows for efficient energy transfer and the generation of the high voltage necessary for ignition.

know more about voltage here:

https://brainly.com/question/27861305

#SPJ11

The impulse given to the nail by the hammer is 7.56 Ns

The impulse-momentum theorem relates the change in momentum of an object to the impulse applied to it. The impulse is equal to the force applied to an object multiplied by the time interval over which the force is applied:

Impulse = Force x Time

Momentum = mass x velocity

When the hammer strikes the nail, it imparts a force to the nail. This force causes the velocity of the nail to change, and the hammer comes to rest.

Change in Momentum = Final Momentum - Initial Momentum = -Initial Momentum

The initial momentum of the hammer can be calculated as:

Initial Momentum = mass x velocity = 15 kg x 5.0 m/s = 75 kg m/s

The time interval over which the force is applied is given as 5.7 ms, or 5.7 x[tex]10^{-3}[/tex] s. Therefore, the average force applied to the nail can be calculated as:

Average Force = Impulse / Time

We can rearrange this equation to solve for the impulse:

Impulse = Average Force x Time

Average Force = mass x average acceleration = 15 kg x (-Initial Velocity / Time)

Substituting the given values, we get:

Average Force = 15 kg x (-5.0 m/s / (5.7 x [tex]10^{-3}[/tex]s)) = -1.32 x [tex]10^6[/tex] N

Finally, we can calculate the impulse given to the nail as:

Impulse = Average Force x Time = (-1.32 x [tex]10^6[/tex] N) x (5.7 x [tex]10^{-3}[/tex] s) = -7.56 Ns

Learn more about impulse-momentum here:

https://brainly.com/question/11674698

#SPJ11

Answer:13394.15 m

Explanation:

We can use the wave speed formula to solve this problem. The wave speed (v) of a wave is given by the product of its frequency (f) and wavelength (λ):

v = fλ

The angular wave number (k) is related to the wavelength by the formula:

k = 2π/λ

So we can rearrange the formulas to get:

λ = 2π/k

and

v = fλ = f(2π/k)

Substituting the given values, we get:

λ = 2π/37.6 rad/m = 0.167 m

v = (2.79 x 10^3 Hz)(0.167 m) = 466.93 m/s

Finally, we can use the formula for distance (d) traveled by a wave in time (t) to get:

d = vt = (466.93 m/s)(28.7 s) = 13394.15 m

Therefore, the wave will travel approximately 13394.15 meters in 28.7 seconds.

A command economy is one in which the government owns and runs all the businesses. Option D.

In a command economy, the government makes all the economic decisions, such as what goods to produce, how much to produce, and at what prices.

The government also owns and controls all the resources and means of production, including factories, land, and natural resources.

This is in contrast to a market economy, where individuals and businesses own and operate the means of production and make economic decisions based on market forces and supply and demand.

More on the command economy can be found here: https://brainly.com/question/19226815

#SPJ1

Answer:It is not clear from the question what "eel" is being referred to, so I cannot provide a specific answer.

However, I can provide some general information on how to calculate the electric field generated by a charged object. The electric field is a vector field that describes the strength and direction of the force that would be exerted on a small positive test charge placed at any given point in space.

If the charged object is a point charge Q located at a distance r from the point of interest, the electric field E at that point is given by:

E = k * Q / r^2

where k is Coulomb's constant (k = 9 x 10^9 N·m^2/C^2).

If the charged object is not a point charge but has a finite size, the electric field at any given point can be calculated by summing up the contributions from all the individual charge elements that make up the object. This can be a complex calculation depending on the geometry of the object.

In the specific case described in the question, we are given the potential difference between two electrodes and the distance between them. The electric field can be calculated from these values using the equation:

E = V / d

where V is the potential difference and d is the distance between the electrodes. Substituting the given values, we get:

E = 5.6 V / 0.01 m = 560 V/m

So the electric field generated by the charged object (which is not specified in the question) is approximately 560 V/m.

Explanation:

The electric field generated by the eel is 560 V/m.

An electric field is a physical field that surrounds an electrically charged object and exerts a force on other charged objects within its vicinity. It is a fundamental concept in physics that helps explain the behavior of charged particles and the interactions between them.

Electric fields are created by electric charges, which can be either positive or negative. A positive charge creates an electric field that points away from the charge, while a negative charge creates an electric field that points towards the charge. The strength of an electric field is proportional to the amount of charge that creates it and inversely proportional to the distance from the charge.

Electric fields can be visualized using field lines, which indicate the direction and strength of the electric field at each point in space. The field lines point away from positive charges and towards negative charges, and the density of the field lines indicates the strength of the field.

Electric fields are important in many areas of physics, including electromagnetism, electrostatics, and electronics. They play a crucial role in the operation of electronic devices, such as capacitors, transistors, and integrated circuits, and are also used in medical imaging technologies, such as MRI and EEG.

Here in the Question,

Assuming that you are referring to the electric eel, we can use the formula for electric field generated by a point charge to estimate the approximate electric field generated by the eel:

E = k * Q / r^2

where E is the electric field, k is Coulomb's constant (k = 9.0 x 10^9 N*m^2/C^2), Q is the electric charge, and r is the distance from the charge.

We can estimate the charge of the eel based on the potential difference measured between the two electrodes:

V = E * d

where V is the potential difference, E is the electric field, and d is the distance between the electrodes.

Rearranging the formula, we get:

E = V / d

Substituting the values given in the problem, we get:

E = 5.6 V / 1.0 cm = 560 V/m

Therefore, the approximate electric field generated by the eel is 560 V/m.

To learn more about  Coulomb's law click:

brainly.com/question/28040775

#SPJ2

The downward force applied by the counterweight is 15000N.

The moment of a force is equal to its magnitude multiplied by its perpendicular distance from the pivot. So, we can write:

Moment of load = Moment of counterweight

30m x 5000N = 10m x Fc

where Fc is the downward force applied by the counterweight.

Solving for Fc, we get:

Fc = (30m x 5000N) / 10m = 15000N

Force is a physical quantity that describes the interaction between two objects. It is a vector quantity, meaning it has both magnitude and direction. Force is measured in the International System of Units (SI) using the unit of Newtons (N). The effect of force on an object depends on its mass and acceleration. According to Newton's second law of motion, the force acting on an object is directly proportional to its acceleration and inversely proportional to its mass.

When two objects interact, they exert forces on each other. These forces can either be attractive or repulsive, depending on the nature of the objects and the type of interaction. For example, the force of gravity is an attractive force between two masses, while the force between two electric charges can be either attractive or repulsive.

To learn more about Force visit here:

brainly.com/question/13191643

#SPJ4

The wavelength of the light is approximately 546.13 nm.

To calculate the wavelength of the light, we can use the grating equation:
nλ = d sin θ
where n is the order of diffraction (we'll use n = 1 for the first order), λ is the wavelength, d is the distance between the grating lines, and θ is the angle of diffraction.

We are given:
- θ = 22.5°
- 770 lines per mm, which means d = 1/770 mm = 0.0012987 mm = 1.2987 × 10⁻⁶ m (converted to meters)
Now we can plug these values into the grating equation:
(1)λ = (1.2987 × 10⁻⁶ m) sin 22.5°
λ = (1.2987 × 10⁻⁶ m) × 0.382683
λ ≈ 4.9713 × 10⁻⁷ m = 546.13 nm (converted to nanometers)

Summary: When light with an angle of 22.5° passes through a grating with 770 lines per mm, the wavelength of the light is approximately 546.13 nm.

Learn more about wavelength click here:

https://brainly.com/question/10728818

#SPJ11

The spacing of the slits in this Young's double-slit experiment is approximately 1.45 x 10⁻⁶ m.

To determine the spacing of the slits, we can use the formula for interference minima: d * sinθ = (m + 1/2) * λ

Here, d is the spacing slit, sinθ is the sine of the angle between the central maximum and the m-th minimum, m is the minimum order (10 in this case), and λ is the wavelength of the light (515 nm, or 5.15 x 10⁻⁷ m).

The angle θ can be found using the small-angle approximation:

sinθ ≈ tanθ ≈ y/L where y is the distance between the central maximum and the m-th minimum (0.00776 m), and L is the distance between the slits and the screen (2.00 m). sinθ ≈ 0.00776 m / 2.00 m ≈ 0.00388

Now, we can solve for the slit spacing d: d ≈ [(10 + 1/2) * 5.15 x 10⁻⁷ m] / 0.00388 ≈ 1.45 x 10⁻⁶ m

Learn more about wavelengths at

https://brainly.com/question/14702818

#SPJ11

The change in internal energy of the system is equal to the sum of these two values, which is equal to zero.

We need to determine the change in the internal energy of the system, which can be found using the first law of thermodynamics. The first law of thermodynamics states that the change in the internal energy (∆U) of a system is equal to the heat added to the system (Q) minus the work done by the system (W):

∆U = Q - W

In this case, the system loses 250 J of heat to the environment, so Q = -250 J (negative because heat is lost). The environment does 250 J of work on the system, so W = -250 J (negative because work is done on the system).

Now, let's plug the values into the first law of thermodynamics equation:

∆U = (-250 J) - (-250 J)

∆U = -250 J + 250 J

∆U = 0 J

The change in internal energy of the system is 0 J. This means that the internal energy of the system remains constant, as the heat loss to the environment is balanced by the work done on the system by the environment.

To know more about energy, visit:

https://brainly.com/question/1932868

#SPJ11

When two objects collide inelastically, it means that they stick together and move as a single unit after the collision. In such a scenario, the kinetic energy of the system decreases during the collision. This is because some energy is lost to deformation or other non-conservative forces like friction.

Therefore, the total kinetic energy of the system after the collision is less than the total kinetic energy before the collision. However, the momentum of the system is conserved during the collision. Momentum is a vector quantity that is the product of mass and velocity. The law of conservation of momentum states that the total momentum of a system remains constant if no external forces act on it. Therefore, the total momentum of the system before and after the collision will be the same.
To summarize, when two objects collide inelastically, the kinetic energy of the system decreases, but the momentum of the system remains conserved.

for more such questions on  collision

https://brainly.com/question/30271285

#SPJ11

The pair of spacecraft that both orbited and landed on the surface of Mars in 1976 were called Viking 1 and Viking 2.

The Viking program was a series of missions launched by NASA in the 1970s with the goal of studying the surface and atmosphere of Mars. The Viking 1 and Viking 2 spacecraft were each comprised of an orbiter and a lander, which were designed to work together to gather scientific data about the Red Planet.

After entering orbit around Mars, the orbiters sent back high-resolution images of the planet's surface, while the landers touched down on different areas and conducted experiments to analyze the soil, atmosphere, and other characteristics of Mars.

The Viking missions provided a wealth of information about the planet and paved the way for future exploration of Mars by robotic and human missions.

To know more about the Viking experiment visit:

https://brainly.com/question/31551747

#SPJ11

The time required for the lift is approximately 16.74 seconds when a 7.06-hp motor lifts a 243-kg beam directly upward at a constant velocity from the ground to a height of 37.1 m.

To solve this problem, we can use the formula:
Work = Force x Distance
Power = Work / Time
Velocity = Distance / Time
First, let's calculate the force required to lift the beam:
Force = Weight x Acceleration due to gravity
Force = [tex]243 kg * 9.8 m/s^2[/tex]
Force = 2381.4 N
Next, let's calculate the work done by the motor:
Work = Force x Distance
Work = 2381.4 N x 37.1 m
Work = 88,241.94 J
Now, we can use the power of the motor to find the time required for the lift:
Power = Work / Time
Time = Work / Power
Power = 7.06 hp x 746 W/hp
Power = 5,267.76 W
Time = 88,241.94 J / 5,267.76 W
Time = 16.74 s

To learn more about velocity click here https://brainly.com/question/17127206

#SPJ11

This individual observed that an object painted on a revolving disc appeared to be stationary when illuminated by intense electric light. He also noticed that flying insects seemed to be fixed in mid-air by the same means. It was William Roentgen

In 1895, a German physicist William Roentgen who discovered X-rays, noticed this phenomenon while experimenting with cathode rays and a vacuum tube. He noticed that a painted object on a spinning disc appeared stationary when illuminated by an intense electric light. He also observed that flying insects appeared to be suspended in mid-air when exposed to the same illumination.

These observations led him to discover X-rays, which he named due to their unknown nature at the time. Roentgen's discovery revolutionized the field of medicine and had a significant impact on scientific research. In 1901, he was awarded the Nobel Prize in Physics for his groundbreaking discovery. So, it was William Roentgen the  individual observed that an object painted on a revolving disc appeared to be stationary when illuminated by intense electric light.

To learn more about X-rays here

https://brainly.com/question/15137766

#SPJ11

we can use the law of conservation of momentum, which states that the total momentum of a system remains constant if there are no external forces acting on it.

Let's denote the mass of each car as m, and let the initial velocity of each car be v. The total initial momentum of the system is then:

p_initial = mv + m(-v) = 0

This is because the two cars are traveling in opposite directions at equal speeds.

After the collision, the two cars stick together, so they move as one object with a mass of 2m. Let's denote the final velocity of this object as v_f. The final momentum of the system is then:

p_final = (2m)*v_f

By the law of conservation of momentum, we know that p_initial = p_final. Therefore:

0 = (2m)*v_f

Solving for v_f, we get:

v_f = 0

This means that the final velocity of the two cars after the collision is zero. In other words, they come to a complete stop. This result makes sense intuitively, as the two cars have equal masses and speeds in opposite directions, so their momenta cancel out completely when they collide and stick together.

Learn more about law of conservation here:

https://brainly.com/question/24131537

#SPJ11

The five V's of big data (volume, variety, velocity, veracity, and value) provide a holistic understanding of the challenges and opportunities associated with big data management.

The initial three V's of big data, which include volume, variety, and velocity, have been essential in describing the increasing amount of data generated and the speed at which it is processed.

However, two additional V's were later added to give a more comprehensive understanding of big data. The first additional V is veracity, which refers to the accuracy and reliability of the data.

With large volumes of data being generated, it is important to ensure that the information being used is trustworthy. The second additional V is value, which focuses on the significance and usefulness of the data.

Companies must determine the value of the data they collect to make strategic decisions and gain a competitive advantage.

To learn more about : five V's

https://brainly.com/question/29973749

#SPJ11

The velocity of the helium nucleus after the collision is approximately 2.5 * 10^4 m/s.

To solve this problem, we can use the conservation of momentum and the conservation of kinetic energy principles for an elastic collision.

Let's denote:
- The mass of the neutron as m_n
- The mass of the helium nucleus as m_h (which is 4 times the mass of a neutron, so m_h = 4m_n)
- The initial velocity of the neutron as v_n1 = 10^5 m/s
- The initial velocity of the helium nucleus as v_h1 = 0 m/s (at rest)
- The final velocity of the neutron as v_n2
- The final velocity of the helium nucleus as v_h2 (which we want to find)

Step 1: Apply the conservation of momentum principle:
m_n * v_n1 + m_h * v_h1 = m_n * v_n2 + m_h * v_h2

Step 2: Plug in the known values and simplify:
m_n * 10^5 + 4m_n * 0 = m_n * v_n2 + 4m_n * v_h2
10^5 * m_n = m_n * v_n2 + 4m_n * v_h2

Step 3: Divide by m_n:
10^5 = v_n2 + 4v_h2

Step 4: Apply the conservation of kinetic energy principle:
(1/2) * m_n * v_n1^2 + (1/2) * m_h * v_h1^2 = (1/2) * m_n * v_n2^2 + (1/2) * m_h * v_h2^2

Step 5: Plug in the known values and simplify:
(1/2) * m_n * (10^5)^2 = (1/2) * m_n * v_n2^2 + (1/2) * 4m_n * v_h2^2
(1/2) * m_n * (10^5)^2 = (1/2) * m_n * v_n2^2 + 2m_n * v_h2^2

Step 6: Divide by m_n and simplify:
(1/2) * (10^5)^2 = (1/2) * v_n2^2 + 2 * v_h2^2

Step 7: Eliminate v_n2 using the equation from Step 3:
(1/2) * (10^5)^2 = (1/2) * (10^5 - 4v_h2)^2 + 2 * v_h2^2

Step 8: Solve the equation for v_h2:
v_h2 ≈ 2.5 * 10^4 m/s

The velocity of the helium nucleus after the collision is approximately 2.5 * 10^4 m/s.

to learn more about helium nucleus click here:

brainly.com/question/15082272

#SPJ11

Metallic hydrogen is not a phase of (B) hydrogen that occurs when it acts like a metal

This unique state of hydrogen is not commonly found in nature, as it requires extremely high temperatures and pressures to form. This leads us to eliminate options a and d.

Under such conditions, the electrons in hydrogen atoms become free, allowing them to conduct electricity similar to how metals do. This is why metallic hydrogen is referred to as a "metal" even though it is not a traditional metal like iron or copper.

Metallic hydrogen is theorized to be present in the cores of giant planets, specifically gas giants such as Jupiter and Saturn. This is because these planets have the necessary high temperatures and pressures to maintain this state of hydrogen, making option c true. The presence of metallic hydrogen in their cores is believed to contribute to the strong magnetic fields observed in these planets.

In summary, metallic hydrogen is a state where hydrogen acts like a metal (option b), which is formed under extreme conditions and is potentially found in the cores of gas giants (options c and d). The correct answer is b

Know more about Metallic hydrogen here :

brainly.com/question/24433860

#SPJ11

A fish that would stretch the spring by 0.2 meters has a weight of 2 N. Note that 2 N is equal to 0.2 kg

To determine the weight of a fish that would stretch a spring by a certain amount, we need to know the spring constant of the spring and the amount by which it is stretched.

The spring constant, denoted by k, represents the amount of force required to stretch the spring by a certain amount. It is typically measured in units of force per unit of distance, such as Newtons per meter (N/m).

Let's assume that the spring constant of the spring is k = 10 N/m, and it stretches by Δx = 0.2 meters when a fish is attached to it.

The force required to stretch the spring by Δx can be calculated using Hooke's law, which states that the force required to stretch a spring is proportional to the amount of stretch. Mathematically, this can be expressed as:

F = kΔx

where F is the force required, k is the spring constant, and Δx is the amount by which the spring is stretched.

Substituting the values we have, we get:

F = 10 N/m × 0.2 m

F = 2 N

Therefore, a fish that would stretch the spring by 0.2 meters has a weight of 2 N. Note that 2 N is approximately equal to 0.2 kg, since 1 N is equivalent to 0.1 kg. So the weight of the fish is approximately 0.2 kg.

To learn more about weight, refer below:

https://brainly.com/question/31659519

#SPJ11

The angular momentum of the solid cylinder is 90 kg × m²/s.

To find the angular momentum of a solid cylinder with mass 2.50 kg, radius 50.0 cm, and rotating at 2750 rpm, you need to follow these steps:

1. Convert the given radius from centimeters to meters:
50.0 cm = 0.50 m

2. Calculate the moment of inertia (I) for a solid cylinder, which is given by the formula:
I = (1/2) × M × R²
where M is the mass and R is the radius.

3. Plug in the given values into the formula:
I = (1/2) × 2.50 kg × (0.50 m)²
I = 0.3125 kg × m²

4. Convert the given rotational speed from rpm to radians per second:
2750 rpm × (2π radians / 60 seconds) = 287.9793 radians/second

5. Calculate the angular momentum (L) using the formula:
L = I × ω
where ω is the angular velocity in radians per second.

6. Plug in the calculated values into the formula:
L = 0.3125 kg × m² × 287.9793 radians/second
L = 90 kg × m²/s

So, the angular momentum of the solid cylinder is 90 kg × m²/s.

To know more about the angular momentum :

https://brainly.com/question/30338110

#SPJ11

It would take about 17.06 days to travel from Earth to the Moon on a commercial airliner at a speed of 940 km/hour.

To calculate the number of days it would take to travel from Earth to the Moon on a commercial airliner, we need to determine the total travel time based on the given speed of 940 km/hour.

Distance from Earth to the Moon: 384,400 km

Airliner speed: 940 km/hour

To find the travel time, we divide the distance by the speed:

Travel time = Distance / Speed

Travel time = 384,400 km / 940 km/hour

Calculating the result:

Travel time ≈ 409.36 hours

To convert the travel time from hours to days, we divide by 24 (since there are 24 hours in a day):

Travel time ≈ 409.36 hours / 24 hours/day

Calculating the result:

Travel time ≈ 17.06 days

Therefore, it would take approximately 17.06 days to travel from Earth to the Moon on a commercial airliner at a speed of 940 km/hour.

To learn more about earth, refer below:

https://brainly.com/question/31064851

#SPJ11