I need help with this

Two objects exert a gravitational force, Fg on each other. Match each change in the distance d between the objects or the mass m of one of the objects to its effect on the gravitational force. Each effect may be matched to more than one change or not be matched at all.

Tarbell accused Rockefeller of trying to create a monopoly in the oil industry.

Rockefeller established the Standard Oil Company, the first significant commercial trust in the United States and an influential figure in the oil sector.

In order to establish a monopoly in the market, Tarbell charged Rockefeller with engaging in unethical business practises such predatory pricing and conspiring with railroads to drive out rivals.

When Standard Oil had been found to have violated the antitrust laws and regulations in 1911, the U.S. Supreme Court has ordered to dissolve the company.

To learn more about Rockefeller, click:

https://brainly.com/question/9625006

#SPJ1

The resultant velocity of the airplane is 405 mph (southwest).

To find the resultant velocity, we need to use vector addition. We can break down the airplane's velocity into two components: one going south and one going east, and the crosswind's velocity into two components: one going west and one going north. Then we can add the corresponding components together to get the resultant velocity.

Let's assume that south is the positive direction for the airplane's velocity, and west is the negative direction for the crosswind's velocity. Then the components of the airplane's velocity are:

V₁ = 440 mph (south)

V₂ = 0 mph (east)

And the components of the crosswind's velocity are:

V₃ = -35 mph (west)

V₄ = 0 mph (north)

To get the resultant velocity, we add the corresponding components together:

Vx = V₁ + V₃ = 440 mph - 35 mph = 405 mph (southwest)

Vy = V₂ + V₄ = 0 mph + 0 mph = 0 mph

Click the below link, to learn more about Resultant velocity:

https://brainly.com/question/24264932

#SPJ11

The object's charge is 1.35 μC. The electric field strength is calculated to be 3.375 x 10^11 N/C using the formula for electric field strength.

To solve for the object's charge, we can use the formula for electric field strength:
Electric field strength = charge / distance^2
First, we need to convert the distance from centimeters to meters:
2.0 cm = 0.02 m
Plugging in the given values:
270,000 nC = 270,000 x 10^-9 C (converting from nanocoulombs to coulombs)
Electric field strength = 270,000 x 10^-9 C / (0.02 m)^2
Electric field strength = 3.375 x 10^11 N/C
Now we can rearrange the formula to solve for charge:
charge = electric field strength x distance^2
charge = (3.375 x 10^11 N/C) x (0.02 m)^2
charge = 1.35 x 10^-6 C
Therefore, the object's charge is 1.35 microcoulombs (μC).
Answer: The object's charge is 1.35 μC. The electric field strength is calculated to be 3.375 x 10^11 N/C using the formula for electric field strength. To solve for the object's charge, we rearranged the formula and substituted in the given values. The units for charge are coulombs (C), which we converted from the given value in nanocoulombs. The distance was converted from centimeters to meters to match the units of the formula.

To know more about electric field visit :

https://brainly.com/question/15800304

#SPJ11

If a wind farm has a power capacity of 150 mw, then it could generate power for a very large metropolitan city with about 5,000,000 homes (assume 3 kw/home). False.

To determine the total power requirement for the city, we multiply the number of homes by their average power consumption:

Total power requirement = Number of homes × Power consumption per home

Total power requirement = 5,000,000 homes × 3 kW/home

Total power requirement = 15,000,000 kW or 15 GW

As we can see, the total power requirement for the city is 15 GW (gigawatts), which is significantly higher than the 150 MW (megawatts) capacity of the wind farm.

Therefore, the wind farm with a power capacity of 150 MW would not be able to generate enough power to meet the energy needs of a very large metropolitan city with approximately 5,000,000 homes. Additional power sources or multiple wind farms would be required to supply the necessary electricity for the city.

To know more about metropolitan city, please click on:

https://brainly.com/question/16234552

#SPJ11

The answers are,

a. The coil will begin to rotate about axis A2.

b. The magnetic moment of the coil is 3.00 A·m².

c. The maximum torque on the coil is 9.00 N·m.

a. The coil will begin to rotate about axis A2.

This is because the magnetic field is perpendicular to the plane of the coil and the current in the coil creates a magnetic moment that is also perpendicular to the plane of the coil.

According to the right-hand rule, the torque will be in the direction of rotation about an axis perpendicular to both the magnetic field and the magnetic moment.

In this case, the torque will be perpendicular to both the magnetic field and the magnetic moment and will cause the coil to rotate about an axis perpendicular to both.

b. The magnetic moment of the coil can be found using the formula:

μ = NIAB

where N is the number of turns in the coil, I is the current in the coil, A is the area of the coil, and B is the magnetic field. In this case, N = 1, I = 2.00 A, A = 0.500 m x 1.00 m = 0.500 m^2, and B = 3.00 T. Substituting these values, we get:

μ = (1)(2.00 A)(0.500 m²)(3.00 T) = 3.00 A·m²

So the magnetic moment of the coil is 3.00 A·m².

c. The maximum torque on the coil can be found using the formula:

τmax = μBsinθ

where θ is the angle between the magnetic moment and the magnetic field. In this case, the magnetic moment is perpendicular to the magnetic field, so θ = 90° and sinθ = 1. Substituting the values of μ and B, we get:

τmax = (3.00 A·m²)(3.00 T)(1) = 9.00 N·m

So the maximum torque on the coil is 9.00 N·m.

Learn more about torque at: https://brainly.com/question/5352966

#SPJ11

The observer hears a frequency of 515.5 Hz if a plane approaches you at 760 mi/h and produces a sound at a frequency of 256 Hz.

First, let's convert the speed of the plane to meters per second:

760 mi/h = 1223104 m/h

1 h = 3600 s

1223104 m/h ÷ 3600 s/h = 339.75 m/s

The formula to calculate the frequency heard by a stationary observer when a source is moving towards them is:

f' = f( v_sound ± v_observer ) / ( v_sound ± v_source )

where f is the frequency emitted by the source, v_sound is the speed of sound, v_observer is the speed of the observer relative to the medium, and v_source is the speed of the source relative to the medium.

In this case, the plane is the source and it is moving towards the observer, so:

f = 256 Hz

v_sound = 343 m/s

v_observer = 0 (since the observer is stationary)

v_source = 339.75 m/s

f' = 256 (343 + 0) / (343 + 339.75)

f' = 515.5 Hz

Therefore, the observer hears a frequency of 515.5 Hz.

For more such answers on frequency

https://brainly.com/question/254161

#SPJ11

The sound frequency you hear is approximately 121.96 Hz.

To find the frequency you hear, we can use the Doppler effect formula for a moving source and a stationary observer:

f' = f * (v + vo) / (v + vs)

where:
- f' is the observed frequency (the frequency you hear)
- f is the source frequency (256 Hz)
- v is the speed of sound (343 m/s)
- vo is the observer's velocity (0 m/s, since you are stationary)
- vs is the source's velocity (the plane's velocity)

First, let's convert the plane's velocity from miles per hour (mi/h) to meters per second (m/s):

760 mi/h * (1609.34 m/mi) * (1 h/3600 s) ≈ 339.802 m/s

Now, we can plug these values into the Doppler effect formula:

f' = 256 Hz * (343 m/s + 0 m/s) / (343 m/s + 339.802 m/s) ≈ 256 Hz * 343 m/s / 682.802 m/s ≈ 121.96 Hz

Learn more about sound brainly.com/question/29707602

#SPJ11

True, Time series data can exhibit seasonal patterns of less than one month in duration is True

Seasonal patterns refer to a predictable and repeated pattern that occurs within a specific time frame. Time series data can exhibit these patterns, and they can have durations of less than one month. For instance, a sales data set may show a predictable increase in sales every week due to a specific event or promotion.

Time series data can exhibit seasonal patterns of less than one month in duration. Seasonality refers to the recurring patterns observed in the data over time. These patterns can be of any duration, not limited to monthly or yearly occurrences. For instance, weekly or daily patterns are also considered seasonal patterns.

Time series data can indeed exhibit seasonal patterns of less than one month in duration, as seasonal patterns are not limited to monthly or yearly occurrences.

To know more about duration, visit;

https://brainly.com/question/24662469

#SPJ11

The magnitude of the electric field inside the cylinder at r = 2a is 3.72 × 10^4 N/C.

To calculate the electric field inside and outside the charged cylinder, we need to use Gauss's Law and consider the symmetry of the system. Gauss's Law states that the electric flux through a closed surface is proportional to the charge enclosed by the surface.

Inside the cylinder (a ≤ r ≤ b):

Using Gauss's Law, we can determine that the electric field inside a hollow cylinder is zero. This is because the charge enclosed by any closed Gaussian surface inside the cylinder is zero, resulting in no electric field inside.

Outside the cylinder (r > b):

For regions outside the cylinder, we consider a Gaussian surface in the form of a cylindrical shell with radius r and length L. The charge enclosed by this surface is A × L × r, where A is the charge distribution constant and L is the length of the cylinder.

Applying Gauss's Law, the electric flux through the cylindrical surface is given by Φ = E × 2πrL, where E is the magnitude of the electric field. The charge enclosed by the surface is A × L × r. Therefore, Φ = A × L × r / ε₀, where ε₀ is the permittivity of free space.

Equating the electric flux and the charge enclosed, we have[tex]E × 2πrL = A × L × r / ε₀[/tex]. Simplifying, we find E = A / (2πε₀), which is constant and independent of r.

Substituting the given values, A = 9.3 C/m³ and ε₀ = 8.854 × 10^−12 C²/(N·m²), we can calculate the electric field outside the cylinder at r = a + b.

For r = a + b:

[tex]E = A / (2πε₀) = (9.3 C/m³) / (2π × 8.854 × 10^−12 C²/(N·m²)) ≈ 1.05 × 10^11 N/C.[/tex]

Therefore, the magnitude of the electric field outside the cylinder at r = a + b is approximately 1.05 × 10^11 N/C.

Learn more about Gauss's Law

brainly.com/question/13434428

#SPJ11

threshold This threshold determines their ability to perceive the auditory stimulus and plays a crucial role in understanding the limits of their sensory perception.

The threshold refers to the minimum level of stimulus required for a research subject to detect or perceive a particular sensation. In this experiment, the research subject's threshold for hearing the sound of the bell is the level at which they can detect the sound in 50 percent of the trials. This threshold determines their ability to perceive the auditory stimulus and plays a crucial role in understanding the limits of their sensory perception. The auditory discrimination threshold refers to the level of sound intensity at which a research subject can hear the sound of a bell in 50 percent of the trials. It represents the point at which the subject can distinguish the presence of the bell sound from its absence with a 50% accuracy rate. This threshold is an important measure in understanding the subject's auditory sensitivity and their ability to detect subtle differences in sound stimuli.

learn more about threshold here:

https://brainly.com/question/13327021

#SPJ11

The angle of refraction is the angle between the refracted ray and the normal at the interface between two media of different refractive indices. The critical angle is the angle of incidence at which the refracted ray makes an angle of 90 degrees with the normal and no refraction occurs.

        n1 sin θ1 = n2 sin θ2

        sin C = n2/n1

       sin C = 1.461/1.333 = 1.096

        C = sin^-1(1.096) = 46.8 degrees

For such more questions on angle of refraction

https://brainly.com/question/15315610

#SPJ11

The activity of the drug containing 9943Tc at the time it is injected is approximately 1.21 μCi.

To determine the activity of the drug at the time of injection, we need to account for the decay of 9943Tc, which has a half-life of 6.05 hours. Since the drug is injected 2.00 hours after preparation, we can find the number of half-lives that have passed by dividing the elapsed time (2.00 hours) by the half-life (6.05 hours): 2.00 / 6.05 ≈ 0.33 half-lives.

Now, we can calculate the remaining activity using the initial activity (1.70 μCi) and the decay factor. The decay factor is given by (1/2)^n, where n is the number of half-lives that have passed. In this case, the decay factor is (1/2)^0.33 ≈ 0.71. Finally, multiply the initial activity by the decay factor to obtain the remaining activity at the time of injection: 1.70 μCi * 0.71 ≈ 1.21 μCi.

Learn more about drug here:

https://brainly.com/question/13294633

#SPJ11

UV light has limitations as a means of sterilization because it is not effective against all types of microorganisms and it cannot penetrate through surfaces or materials.

While UV light is effective against viruses and bacteria on surfaces that are directly exposed to the light, it may not be effective against spores or other resistant organisms. Additionally, if there are shadows or areas that are not directly exposed to the light, those areas may not be sterilized.

Furthermore, UV light cannot penetrate through materials such as fabrics, paper, or plastic, which means that it may not be effective in sterilizing certain items or surfaces. Additionally, UV light can be harmful to human skin and eyes, which means that proper precautions must be taken when using it in operating rooms or clean rooms.

In summary, while UV light can be effective in certain situations, it has limitations and should be used in conjunction with other sterilization methods for maximum effectiveness.

To know more about UV light refer to

https://brainly.com/question/25724408

#SPJ11

For the principle quantum number n = 5, the greatest number of values the spin quantum number can have is 2 (d.)

The spin quantum number can have only two values, +1/2 or -1/2, regardless of the value of the principle quantum number. Therefore, the correct answer is d. 2. This is because the spin quantum number describes the intrinsic angular momentum of the electron, and it is independent of the other quantum numbers.

The other quantum numbers that describe the electron's state are the principle quantum number, azimuthal quantum number, and magnetic quantum number. Together, these quantum numbers define the electron's energy, shape, orientation, and spin in an atom. Therefore, understanding the different quantum numbers is crucial in understanding the electronic structure of atoms and their properties.

Learn more about quantum number here:

https://brainly.com/question/16746749

#SPJ11

The wavelength in angstroms for the line of NGC 2903, more information is needed, such as the specific spectral line you are referring to or the element being observed..

Spectral lines are specific wavelengths of light that are emitted or absorbed by atoms and molecules. The wavelength of a spectral line is determined by the energy levels of the atoms or molecules involved in the transition. Therefore, we need to know which spectral line in NGC 2903 is being observed. Once we have that information, we can look up the corresponding wavelength in angstroms.

NGC 2903 is a barred spiral galaxy, and it can emit various spectral lines depending on the elements present in the galaxy. Spectral lines are unique to each element and can be used to identify the elements in the galaxy. However, without knowing the specific spectral line or element you are referring to, it's not possible to provide the exact wavelength in angstroms.

To know more about wavelength visit:

https://brainly.com/question/13533093

#SPJ11

The magnetic field in the pulse can be determined using the relation between the electric field, magnetic field, and velocity of an electromagnetic wave, the magnetic field in the pulse is <0, 8.3 × 10^6, 0> Tesla.

The magnetic field in the pulse can be determined using the relation between the electric field, magnetic field, and velocity of an electromagnetic wave. The equation is:
B→ = (1/c) * (E→ × v→)
where B→ is the magnetic field vector, E→ is the electric field vector, v→ is the velocity vector, and c is the speed of light.
Given the electric field E→ = <8.3 × 10^6, 0, 0> N/C and the velocity vector v→ = <0, 0, -c>, we can find the magnetic field:
B→ = (1/c) * (<8.3 × 10^6, 0, 0> × <0, 0, -c>)
To find the cross product, we have:
B→ = (1/c) * <(0) - (0), -(8.3 × 10^6)(-c) - (0), (0) - (0)>
B→ = (1/c) * <0, 8.3 × 10^6c, 0>
Since c cancels out, the magnetic field vector is:
B→ = <0, 8.3 × 10^6, 0> T
So, the magnetic field in the pulse is <0, 8.3 × 10^6, 0> Tesla.

To know more about electric field visit :

https://brainly.com/question/28347684

#SPJ11

The image distance is 44.8 cm, B. The magnification is 2.8x (upright and enlarged).

Using the thin lens equation, 1/f = 1/do + 1/di, where f is the focal length, do is the object distance, and di is the image distance, we can find the image distance as:

1/28 = 1/16 + 1/di

Simplifying this equation, we get:

di = 44.8 cm

Therefore, the image of the stamp is formed 44.8 cm behind the lens.

B. The magnification of the image is given by the ratio of the height of the image to the height of the object. Since the stamp is being viewed through a converging lens, the image is virtual and upright, and the magnification is positive.

Using the magnification equation, m = -di/do, where m is the magnification, we can find the magnification as:

m = -di/do = -44.8/16 = -2.8

Therefore, the magnification of the stamp is 2.8 times its actual size, and it appears upright and enlarged to the stamp collector.

Learn more about  magnification

brainly.com/question/21370207

#SPJ11

The energy stored in a 2.60-cm-diameter, 14.0-cm-long solenoid that has 150 turns of wire and carries a current of 0.780 a is 0.016 joules.

The energy stored in a solenoid is given by the equation:

U = (1/2) * L * I²

where U is the energy stored, L is the inductance of the solenoid, and I is the current flowing through it.

The inductance of a solenoid can be calculated using the equation:

L = (μ * N² * A) / l

where μ is the permeability of the medium (in vacuum μ = 4π × 10⁻⁷ H/m), N is the number of turns of wire, A is the cross-sectional area of the solenoid, and l is the length of the solenoid.

First, let's calculate the inductance of the solenoid:

μ = 4π × 10⁻⁷ H/m

N = 150

A = πr² = π(0.013 m)² = 0.000530 m²

l = 0.14 m

L = (4π × 10⁻⁷ H/m * 150² * 0.000530 m²) / 0.14 m = 0.051 H

Now, we can calculate the energy stored in the solenoid:

I = 0.780 A

U = (1/2) * L * I^2 = (1/2) * 0.051 H * (0.780 A)² = 0.016 J

Therefore, the energy stored in the solenoid is 0.016 joules.

Learn more about solenoid at: https://brainly.com/question/3821492

#SPJ11

(a) The emission spectrum of hydrogen atoms with electrons initially in n=4 has 4 wavelengths, with the (b) longest being 486 nm in the (c) Balmer series (option a).

If a large number of hydrogen atoms have all their electrons initially in the n=4 state, the emission spectrum will have 4 different wavelengths.

This is because the electrons can transition to lower energy states, and each transition releases a specific amount of energy as a photon with a unique wavelength.

The longest wavelength that could be observed in this case is 486 nm, which belongs to the Balmer series. This series includes transitions from higher energy levels to the n=2 state.

The Lyman series corresponds to transitions to the n=1 state, and the Paschen series corresponds to transitions to the n=3 state.

For more such questions on electrons, click on:

https://brainly.com/question/860094

#SPJ11

Three different wavelengths would be observed in the emission spectrum of these atoms. The longest wavelength that could be observed is 857 nm.

(a) When electrons in hydrogen atoms fall from higher energy levels to lower energy levels, they release energy in the form of electromagnetic radiation. The wavelength of this radiation depends on the difference in energy between the two levels. In this case, all the electrons are initially in the n=4 state, so they can fall to the n=3, n=2, or n=1 states, resulting in three possible transitions.

Therefore, three different wavelengths would be observed in the emission spectrum of these atoms.

(b) The longest wavelength that could be observed corresponds to the smallest energy difference between two energy levels. The smallest energy difference between the n=4 and n=3 states is given by:

ΔE = E4 - E3 = -2.18 × [tex]10^{-18[/tex] J ([tex]1/4^2 - 1/3^2[/tex])

The corresponding wavelength is given by the equation:

λ = hc / ΔE

where h is Planck's constant and c is the speed of light.

Substituting the values, we get:

λ = (6.626 × [tex]10^{-34[/tex] J s)(3.00 × [tex]10^8[/tex] m/s) / (-2.18 × [tex]10^{-18[/tex] J)

λ = 8.57 ×[tex]10^{-7[/tex]m = 857 nm

Therefore, the longest wavelength that could be observed is 857 nm.

(c) The wavelength found in part (b) belongs to the Balmer series. The Balmer series corresponds to transitions between energy levels with n greater than or equal to 3 and n=2. The transition from n=4 to n=3 is part of the Balmer series.

Learn more about wavelengths here:

https://brainly.com/question/13533093

#SPJ11

A. The electron-pair geometry for C in CH₃- is tetrahedral. There is 1 lone pair around the central atom, so the molecular geometry (shape) of CH₃- is trigonal pyramidal.
B. The electron-pair geometry for C in CH₂O is trigonal planar. There are 0 lone pairs around the central atom, so the molecular geometry (shape) of CH₂O is trigonal planar.


A. In CH₃-, the central carbon atom forms three single bonds with three hydrogen atoms and has one lone pair of electrons, making four electron groups. This results in a tetrahedral electron-pair geometry. The presence of one lone pair distorts the shape to trigonal pyramidal.
B. In CH₂O, the central carbon atom forms two single bonds with two hydrogen atoms and one double bond with an oxygen atom, making three electron groups. This results in a trigonal planar electron-pair geometry and, since there are no lone pairs, the molecular shape is also trigonal planar.


A. CH₃- has a tetrahedral electron-pair geometry and a trigonal pyramidal molecular geometry due to the presence of one lone pair.
B. CH₂O has a trigonal planar electron-pair geometry and molecular geometry, as there are no lone pairs on the central carbon atom.

To know more about  electron-pair geometry ,visit:

https://brainly.com/question/24232047

#SPJ11

A spread spectrum code, ct = [1, -1, 1, -1], is a sequence of values used for spreading the signal in the frequency domain, which increases signal resistance to interference and noise.

The given spread spectrum code, ct = [1, -1, 1, -1], consists of four values. This code can be applied to a data signal using methods like Direct Sequence Spread Spectrum (DSSS) or Frequency Hopping Spread Spectrum (FHSS). In DSSS, the data bits are multiplied by the code sequence to spread the signal.

For example, if the data signal is [1, 0, 1], the spread signal would be [1(-1), -1(1), 1(-1), -1(1), 1(-1), -1(1), 1(-1), -1(1), 1(-1), -1(1), 1(-1), -1(1)]. In FHSS, the code is used to determine the frequency hopping pattern. The spread spectrum code provides better resistance to noise and interference, making it more robust and secure for communication systems.

To know more about Frequency Hopping Spread Spectrum click on below link:

https://brainly.com/question/31109715#

#SPJ11

You would have to round up to the nearest whole number as you cannot have a fraction of a tank. In order to travel 1600 km, you would require 5 tanks of fuel.

To convert the mileage from miles per gallon (mpg) to kilometers per liter (km/l), we can use the conversion factor of 1 mile = 1.60934 kilometers and 1 gallon = 3.78541 liters.

First, let's convert the mileage:

55.0 mpg * 1.60934 km/mile = 88.5137 km/gallon

Next, we convert from gallons to liters:

88.5137 km/gallon * 3.78541 liters/gallon = 334.647 km/liter

Now, we can calculate the number of tanks of gas needed to drive 1600 km:

[tex]\text{Number of tanks of gas} = \frac{\text{Distance}}{\text{Fuel efficiency}} = \frac{1600 \, \text{km}}{88.5137 \, \text{km/gallon}} = 18.07 \, \text{tanks of gas}[/tex]

Since you cannot have a fraction of a tank, you would need to round up to the nearest whole number. Therefore, you would need 5 tanks of gas to drive 1600 km.

To know more about the fraction of a tank refer here :

https://brainly.com/question/16620701#

#SPJ11

While the work done by the magnetic field is always zero, the force can lead to circular motion or other complex trajectories.

The work done on a particle by a magnetic field is always zero. This is because the magnetic force is always perpendicular to the velocity of the particle, and the work done by a force is given by the dot product of the force and displacement vectors. Since the dot product of two perpendicular vectors is always zero, the work done by the magnetic field is also zero.
In the case where a positively charged particle is moving in a uniform magnetic field with its initial velocity vector perpendicular to the magnetic field, the magnetic force on the particle is always directed towards the center of the circular path. This means that the particle undergoes circular motion in a plane perpendicular to the magnetic field.
The radius of the circular path is given by r = mv/qB, where m is the mass of the particle and B is the magnitude of the magnetic field. The period of the circular motion is given by T = 2πr/v. These equations show that the radius and period of the circular motion depend on the mass, charge, velocity, and magnetic field strength of the particle.
Overall, the magnetic force on a moving charged particle plays an important role in determining its motion in a magnetic field.

To know more about magnetic force visit:

https://brainly.com/question/31748676

#SPJ11

The elastic modulus of this tendon is approximately 8.89 N/mm².  The elastic modulus of the animal tendon is 5.37 MPa.  

Stress = Force/Area
Area = pi*(diameter/2)^2 = pi*(9.0 mm/2)^2 = 63.62 mm^2
Stress = 13 N / 63.62 mm^2 = 0.204 MPa
Strain = Change in length/Original length
Strain = 3.8 mm / 13 cm = 0.038
Now, we can use the formula for elastic modulus:
Elastic Modulus = Stress/Strain
Elastic Modulus = 0.204 MPa / 0.038
Elastic modulus = 5.37 MPa



Elastic Modulus (E) = (Force × Original Length) / (Area × Extension)
First, we need to calculate the cross-sectional area (A) of the tendon, which is given by the formula for the area of a circle:
A = π × (d/2)^2
Where d is the diameter (9.0 mm).
A = π × (9.0/2)^2 ≈ 63.62 mm²
Next, we have the original length (L) = 13 cm = 130 mm, the extension (∆L) = 3.8 mm, and the force (F) = 13 N. Now, we can plug these values into the formula:
E = (13 N × 130 mm) / (63.62 mm² × 3.8 mm)
E ≈ 8.89 n/mm²

To know more about  elastic modulus visit:-

https://brainly.com/question/30505066

#SPJ11

The frequency at which the average power delivered to the circuit is equal to 1/2 V_rms I_rms is approximately 1.33 kHz.

The average power delivered to an L-R-C series circuit is given by the equation P_avg = 1/2 V_rms I_rms cos(phi), where phi is the phase angle between the voltage and current. At resonance, the phase angle is zero and cos(phi) = 1, so the average power is simply equal to V_rms I_rms. The resonant frequency of an L-R-C series circuit can be calculated using the equation f_res = 1/(2pisqrt(LC)), where L is the inductance, C is the capacitance, and pi is the mathematical constant pi (approximately 3.14159). Substituting the given values, we get f_res = 1/(2pisqrt(2.50e-64.50e-3)) = 1.33 kHz (approximately). Therefore, at a frequency of 1.33 kHz, the average power delivered to the circuit is equal to 1/2 V_rms I_rms.

To know more about frequency, click here:

https://brainly.com/question/29739263

#SPJ11

The electric field at the center of mass of the plate is zero.

The electric field strength will depend on the units used for charge and distance.

Due to the symmetry of the charge distribution in the thin copper plate, the electric field at the center of mass of the plate is zero.

A. Electric field strength 0.1 mm above the center of the top surface of the plate:

We have a copper plate with a diameter of 14 cm, which means the radius is 7 cm or 0.07 m. The total charge on the plate is 4.5 nC or 4.5 × 10^(-9) C.

First, calculate the surface charge density (σ) by dividing the total charge by the surface area of the plate:

σ = Q / A

σ = (4.5 × 10^(-9) C) / (π(0.07 m)²)

Next, calculate the electric field using the formula:

E = (σ / (2ε₀)) * (1 - (z / √(z² + R²)))

For this case, z = 0.0001 m (0.1 mm).

Plug in the values and calculate the electric field strength at that position.

B. Electric field strength at the plate's center of mass:

Due to the symmetry of the charge distribution in the thin copper plate, the electric field at the center of mass of the plate is zero.

C. Electric field strength 0.1 mm below the center of the top surface of the plate:

Use the same formula as in part A, but this time, z = -0.0001 m (-0.1 mm).

Plug in the values and calculate the electric field strength at that position.

Please note that the electric field strength will depend on the units used for charge and distance. Make sure to use consistent units in your calculations.

To learn more about field, refer below:

https://brainly.com/question/8705524

#SPJ11

To maintain the same interference pattern spacing as the first experiment with a slit separation of 4.5 mm, the new screen-to-slit distance should be 1.5 m in the second experiment.

In Young's double-slit experiment, the formula for the spacing between adjacent bright or dark fringes is given by:

y = (λ * L) / d

Where:

y is the fringe spacing (distance between adjacent bright or dark fringes)

λ is the wavelength of the light

L is the distance from the slits to the screen

d is the slit separation

In the first experiment, with a slit separation of 4.5 mm and a distance of 3.0 m to the screen, the fringe spacing can be calculated as follows:

y1 = (700 nm * 3.0 m) / 4.5 mm

Now, in the second experiment, we want to maintain the same interference pattern spacing (fringe spacing). Let's assume the new screen-to-slit distance is L2. The new slit separation is given as 9.0 mm. The fringe spacing in the second experiment can be calculated as:

y2 = (700 nm * L2) / 9.0 mm

Since we want the fringe spacing to remain the same, we can set y1 equal to y2:

(700 nm * 3.0 m) / 4.5 mm = (700 nm * L2) / 9.0 mm

We can solve this equation for L2:

L2 = (3.0 m * 4.5 mm) / 9.0 mm

Calculating this expression:

L2 = 1.5 m

Therefore, to maintain the same interference pattern spacing as the first experiment with a slit separation of 4.5 mm, the new screen-to-slit distance should be 1.5 m in the second experiment.

To know more about distance here

https://brainly.com/question/32063540

#SPJ4

The post-explosion velocity of the 1.5-kg cannon can be determined by applying the principle of conservation of momentum.

According to the principle of conservation of momentum, the total momentum before the explosion is equal to the total momentum after the explosion. Initially, the cannon and ball are moving forward with a speed of 1.27 m/s. The momentum of the cannon-ball system before the explosion can be calculated as the sum of the momentum of the cannon and the momentum of the ball.

The momentum of the cannon can be found by multiplying its mass (1.5 kg) with its initial velocity (1.27 m/s), which gives us 1.905 kg·m/s. The momentum of the ball is the product of its mass (0.0527 kg) and the initial velocity (1.27 m/s), resulting in 0.0671029 kg·m/s. Therefore, the total initial momentum is 1.9721029 kg·m/s.

After the explosion, the ball is launched forward with a velocity of 75 m/s. Since there are no external forces acting on the system, the momentum of the cannon-ball system after the explosion is equal to the momentum of the ball alone. Thus, the post-explosion velocity of the cannon can be found by dividing the total initial momentum by the mass of the cannon.

Dividing 1.9721029 kg·m/s by 1.5 kg, we find that the post-explosion velocity of the cannon is approximately 1.3147353 m/s.

Learn more about conservation of momentum here:

https://brainly.com/question/24989124

#SPJ11

Sure! To answer your question, we can use the equation:
velocity = frequency x wavelength

where velocity is the speed of the wave (given as 204 m/s), frequency is the number of waves that pass a point per second (in Hz), and wavelength is the distance between two consecutive points on the wave that are in phase with each other (in meters).
We can rearrange the equation to solve for wavelength:
wavelength = velocity / frequency
To find the frequency, we can use another equation:
frequency = velocity / wavelength
Substituting in the given values, we have:
(a) wavelength = velocity / frequency = 204 m/s / (1.2 rad/m) = 170 m
So the wavelength of the wave is 170 meters.
(b) frequency = velocity / wavelength = 204 m/s / 170 m = 1.2 Hz
So the frequency of the wave is 1.2 Hz.

For more such question on frequency

https://brainly.com/question/28821602

#SPJ11

Given the wave speed of 204 m/s and wave number of 1.2 rad/m, we can use the equation: Wave speed = wavelength x frequency

To find the wavelength, we rearrange the equation to solve for wavelength:
wavelength = wave speed / frequency
Substituting the given values, we get:
wavelength = 204 m/s / frequency
To find the frequency, we use the relationship between wave number and wavelength:
wave number = 2π / wavelength
Rearranging the equation, we get:
wavelength = 2π / wave number
Substituting the given wave number of 1.2 rad/m, we get:
wavelength = 2π / 1.2 rad/m = 5.24 m
Now that we have the wavelength, we can find the frequency using the equation we derived earlier:
frequency = wave speed / wavelength
Substituting the given wave speed of 204 m/s and calculated wavelength of 5.24 m, we get:
frequency = 204 m/s / 5.24 m = 38.93 Hz
Therefore, the wavelength is 5.24 m and the frequency is 38.93 Hz.

We are given that a wave travels with a speed of 204 m/s, and its wave number is 1.2 rad/m. We need to find (a) the wavelength in meters and (b) the frequency in Hz.
(a) To find the wavelength, we use the formula:
wavelength = 2π / wave number
Substituting the given values:
wavelength = 2π / 1.2 rad/m
wavelength ≈ 5.24 m
So, the wavelength of the wave is approximately 5.24 meters.
(b) To find the frequency, we use the wave speed formula:
wave speed = wavelength × frequency
Rearranging for frequency:
frequency = wave speed / wavelength
Substituting the values:
frequency = 204 m/s / 5.24 m
frequency ≈ 38.93 Hz
So, the frequency of the wave is approximately 38.93 Hz.

Visit here to learn more about wave speed:

brainly.com/question/31682106

#SPJ11

If the applied voltage is doubled, the time constant will decrease by a factor of 2 i.e. it halves.

An LR circuit consists of a resistor (R) and an inductor (L) connected in series. When a voltage is applied to the circuit, the inductor resists the change in current flow, creating a time delay known as the inductive time constant (τ = L/R).
If the applied voltage to an LR circuit is doubled, the current in the circuit will also double, resulting in a higher rate of change in current flow. This, in turn, will decrease the time constant of the circuit, as the inductor will be able to reach its maximum current more quickly. Therefore, if you double the applied voltage of a signal to an LR circuit and change nothing else, the inductive time constant will halve (1/2 as much as before).
It is important to note that changing other parameters of the circuit, such as the resistance or inductance, will also affect the time constant. However, if only the applied voltage is doubled, the time constant will be half.

To know more about LR Circuits visit:
https://brainly.com/question/31322792
#SPJ11

Hi! To calculate the heat flow through the glass window, you can use the formula for heat conduction, which is:

Q = (k * A * ΔT * t) / d

where:
Q = heat flow (Joules)
k = thermal conductivity of glass (W/m·K) - approximately 0.8 W/m·K for typical glass
A = area of the window (m²)
ΔT = temperature difference between inside and outside (°C)
t = time (seconds)
d = thickness of the window (m)

First, we need to convert the given measurements to meters and seconds:

Thickness: 0.35 cm = 0.0035 m
Width: 84 cm = 0.84 m
Height: 36 cm = 0.36 m
Time: 1 minute = 60 seconds

Now we can calculate the area of the window:
A = 0.84 m * 0.36 m = 0.3024 m²

Next, we can plug in the values into the formula:

Q = (0.8 * 0.3024 * 15 * 60) / 0.0035
Q ≈ 20571.43 Joules

So, approximately 20,571.43 Joules of heat flows through the glass window per minute when there is a 15°C temperature difference between the inside and outside.

learn more about this

https://brainly.in/question/1113703?referrer=searchResults

#SPJ11