How much of the world's energy is hydroelectric?

Answer:

[tex]2.09 m/s^{2}[/tex]

Explanation:

The upward acceleration of an object can be calculated using the formula:

[tex]a = F / m[/tex]

where:

a is the acceleration of the object (in meters per second squared)

F is the force acting on the object (in newtons)

m is the mass of the object (in kilograms)

So in this case, we have:

[tex]a = 11000 N / 5250 kg = 2.09 m/s^2[/tex]

This is the upward acceleration of the helicopter when a force of 11000 N is acting on it.

In ∑ F = m v^2r , both m and r are unknown but remain constant

Any force, or set of forces, can accelerate an object radially or centripetally. A few examples include the tension in a tether ball's rope, the gravitational pull of the Earth on the Moon, the friction between roller skates and a rink's floor, the force of a banked road on a car, and the forces on a centrifuge's tube.

A centripetal force is any net force that produces uniform circular motion. The centripetal force and centripetal acceleration both point in the direction of the centre of curvature. Newton's second equation of motion states that net force equals mass times acceleration, or net F = m a.

The centripetal acceleration—a = a c—determines the rate of acceleration for uniform circular motion.

Consequently, the size of

To be learn more about produces refer to:

https://brainly.com/question/30141735?referrer=searchResults

#SPJ1

The amount of matter present is simply referred to as mass. As a result, temperature change has no direct effect on mass since the amount of matter present remains constant regardless of temperature. The mass of a material in a given volume is defined as its density.

Temperature is a physical measure that quantifies our feelings of hotness and coolness. A thermometer is used to measure temperature.

Thermometers are calibrated in a variety of temperature scales that have traditionally been defined by various reference points and thermometric substances.

The most prevalent scales are the Celsius scale (previously known as centigrade), the Fahrenheit scale (°F), and the Kelvin scale (K), with the latter being used mostly for scientific reasons. The kelvin is one of the International System of Units' seven basic units (SI).

Learn more about  temperature to visit this link

https://brainly.com/question/11464844

#SPJ4

The forearm serves as the lever arm, while the elbow serves as the pivot. In spite of the forearm's weight and whatever additional weight the hand may be bearing, the biceps muscle exerts the force and bends the forearm. Compared to the effort, the weight is further from the pivot.

A moving bar that pivots on a fulcrum fastened to a fixed point is the lever. The lever works by exerting forces at various angles in relation to the pivot or fulcrum. Ones farther from this pivot move more quickly than points closer to it when the lever revolves around the fulcrum.

A moving bar that pivots on a fulcrum fastened to a fixed point is the lever. The lever works by exerting forces at various angles in relation to the pivot or fulcrum. Ones farther from this pivot move more quickly than points closer to it when the lever revolves around the fulcrum.

For such more question on Pivoted.

https://brainly.com/question/21497963

#SPJ4

The correct option is A, After the switch is closed, the top plate of the capacitor eventually becomes positively charged.

A capacitor is a passive device that stores electrical energy in an electric field. It consists of two conducting plates separated by an insulating material such as air, paper, mica, ceramic, or plastic. When a voltage is applied across the two plates, the electric field created between them stores the energy in the form of an electrostatic potential.

When the voltage is removed, the charge stored in the capacitor is slowly discharged, releasing the energy. Capacitors are used in a wide range of applications, from power supplies and signal processing to motor control, filtering, and energy storage. They are also used to smooth out short-term fluctuations in voltage or current and are key components in many types of electronic circuits.

To learn more about Capacitor visit here:

brainly.com/question/12324415  

#SPJ4

Based on the age of the light- and dark-colored regions of the Moon and the number of craters observed in these regions, we know that impacts in the inner Solar System rapidly decreased approximately 3 billion years ago.

The light-colored areas of the Moon's surface are roughly 1 billion years older than the dark-colored regions.

The dark patches are basalt-based juvenile plains known as maria. The basalt poured in and inundated the region left by a massive asteroid or comet collision. The bright regions are the highlands, which are raised mountains caused by impacts.

The light-colored material is found in portions of the Moon known as the highlands, which represent the Moon's oldest crust.

The lunar highlands are the earliest lunar features. This is mostly determined by the amount of impact craters found in various locations of the moon.

For more questions on Solar System

https://brainly.com/question/1286910

#SPJ4

Answer:

Mechanical energy.

Explanation:

Mechanical energy is the energy that is possessed by an object due to its motion or due to its position. Mechanical energy can be either kinetic energy or potential energy.

This sample tends to break into cubes and is not extremely hard, perhaps just slightly harder than or as hard as a fingernail.

To learn more about sample refer to:

https://brainly.com/question/24517831

#SPJ4

Galena is not very hard, maybe slightly harder than or as hard as a fingernail and seems to break into cubes.

The main source of lead is galena, which is frequently mined for its silver content. In ceramic glaze, it can serve as a source of lead.

Galena was designated as Missouri's official mineral in 1967. The Joplin-Granby region in southwest Missouri, which is a part of the Tri-State Mining District, saw a boom in galena mining. Crawford, Washington, Iron, and Reynolds Counties all have rich deposits.

Galena is lead sulfide with a specific gravity of 7.4 to 7.6 and a Moh's hardness of 2.5, making it actually rather soft. However, it is VERY heavy. It weighs roughly 700 pounds per cubic foot, for comparison.

To know more about minerals visit:

https://brainly.com/question/15844293

#SPJ4

A boy weighing 40 kg jumps off a 600 kg raft horizontally. If the youngster is leaving the raft at a velocity of 4.0 m/s, the raft will be moving at a speed of 0.26 m/s.

The conservation of linear momentum is a general law of physics that states that no single item, or system of objects, experiences a change in the quantity called momentum that describes motion. Momentum is the force needed to stop an item moving at a certain speed in a given amount of time. It is calculated by multiplying an object's mass by its velocity.

Given,

mass of the boy (m₁) = 40 kg

mass of the raft (m₂) = 600 kg

speed of the boy (u₁) = 4 m/s

We have to find out the speed of the raft (u₂)

By conservation of linear momentum, We get

m₁u₁ = m₂u₂

⇒ u₂ = (m₁ ₓ u₁)/m₂

⇒ u₂ = (40*4)/600

⇒ u₂ = 0.26 m/s

Learn more about Velocity:

brainly.com/question/18084516

#SPJ4

According to the given statement The tension force in each rope is T = 14g/2Sin N, according to the information provided.

Tension is the force that is transmitted through a cable, rope, or wires when it is stretched by loads exerted from opposing sides. The bodies are put through an identical degree of strain at each end of the wire by the tension force, which is exerted all along entire of the wire's length.

Let the tension in each rope be T₁ & T₂

Also, T₁ = T₂ = T

T₁ Sinθ + T₂ Sinθ = mg

2T Sinθ = mg

2T Sinθ = 14g

T = 14g/2Sinθ

To Learn more about Tension force from the given link.

brainly.com/question/2008782

#SPJ4

The acceleration due to gravity on this planet is 19.6 m/s².

Acceleration is the rate at which the speed and direction of a moving object vary over time. A point or object going straight ahead is accelerated when it accelerates or decelerates. Even if the speed is constant, motion on a circle accelerates because the direction is always shifting. Both effects contribute to the acceleration of all other motions.

In mechanics, gravity also known as gravitation is the constant force of attraction that pulls all things together. It has little impact on determining the intrinsic characteristics of common stuff because it is by far the weakest known force in nature.

Calculation:

The acceleration due to gravity on the earth's surface is given by

g = ​[tex]\frac{GM}{R^{2} }[/tex]

Now, Mp ​= [tex]\frac{M}{2}[/tex]​, Rp ​= [tex]\frac{R}{2}[/tex]​

The acceleration due to gravity on the new planet is:

[tex]g_{p}[/tex] = [tex]\frac{GM_{p} }{R_{p} ^{2} }[/tex]  ​​=  [tex]\frac{GM/2}{R^{2} /4^{} }[/tex] ​= 2g 

[tex]g_{p}[/tex] ​= 2 × 9.8 = 19.6 m/s².

To know more about acceleration, check out:

https://brainly.com/question/460763

#SPJ1

Answer:

since, Pressure=Force/Area

then,Area=Force/Pressure

or,Area=20000/1000

:.Area=20 m²

The right response is B: To catch a ball, a baseball player moves his or her hand backward in the direction of the ball's motion because  the time of impact is increased.

By doing this, the force of impact on the player's hand is mostly reduced. The force needed to stop the ball will decrease as the amount of time it takes to reach zero motion increases. Consider a ball approaching you with 100 units of momentum. To stop the ball, a 100-unit impulse would be necessary. No matter how the impulse is generated, there must be 100 units of it. A force is an effect that can alter an object's motion in physics.

Learn more about force here

https://brainly.com/question/13191643

#SPJ4

According to the given statement  If suddenly a load is dumped into the cart so that the cart's mass is doubled The acceleration slows.

which speaks of the rate of change in time of the speed and direction of motion. Something is said to be accelerating when it starts to move faster or slower. Even if the speed slows down, motion on a circle accelerates because the direction is constantly changing.

Any process in which the velocity changes is referred to as acceleration. There are only two ways to speed up because velocity consists of both a speed and a direction.

To know more about acceleration visit:

brainly.com/question/12550364

#SPJ4

The truck exerts more force on the mosquito than the mosquito exerts on the truck is true during the collision.

What is the exerts?
Exerts is a term used to describe a passage or an extract taken from a larger piece of writing. Exerts are often used to showcase a specific part of a work and can be used to highlight the most important or influential passages. Exerts can be used to support or illustrate an argument, and can be used to provide evidence for a point that is being made. Exerts are often found in essays, scholarly articles, and other forms of writing, and are a useful tool for authors to draw attention to certain points or ideas.

To learn more about exerts

https://brainly.com/question/17140804

#SPJ4

A circuit with a series connection between a resistor and a capacitor.

To learn more about capacitor refer to:

https://brainly.com/question/21851402

#SPJ4

The acceleration of the particle at t=0 is zero because the particle is in rest position and did not moving at any of the instance or travelling at an uniform speed through out the whole journey or yet did not start from the source point.

Acceleration is the rate of change of velocity. At any point on a trajectory, the magnitude of the acceleration is given by the rate of change of velocity in both magnitude and direction. Acceleration of the body that we can consider is the increasing value of the velocity of any object at a constant rate and that of wee can calculate. Hence by the primary information that we have we can formerly consider that the acceleration which is acting on the particle at t=0 is zero because the particle is in rest position and did not moving at any of the instance or travelling at an uniform speed through out the whole journey or yet did not start from the source point.

Learn more about Acceleration:

brainly.com/question/21509870

#SPJ4

The distance the piston needs to travel for the valve to open is equal to the applied force divided by the area, which is equal to 0.1 m.

What is applied force?

Applied force is a type of force that is applied to an object or system in order to cause it to move, accelerate, or change its shape. This type of force is often generated by machines and other devices, and can also be exerted by humans.

Applied force can also be used to counter other forces, such as gravity, friction, and inertia. Applied force is measured in newtons (N).

To learn abot more applied force.

https://brainly.com/question/25239010

#SPJ1

No, the object will not experience any force of friction because there is no air or other medium in the tube to create friction against the object.

This is because friction is only possible when two objects are in contact with each other, or when an object is in contact with a medium like air or water. Since there is no air or other medium in the tube, there is nothing for the object to interact with. As a result, the object will fall through the tube without any external forces acting on it, such as friction. The motion of the object will be completely determined by the force of gravity and the object's inertia, and no other external forces will be present.

To know more about friction refer to the link  brainly.com/question/13000653

#SPJ4

Answer:

C. In the passage, it seems that both of the cells have the same job, so I would go with C.

The value of Young's modulus will be 6.78*10^8 N/m^2

Linear elastic solid materials have a mechanical characteristic called Young's modulus (Y), which is also referred to as the elastic modulus. It explains how strain (proportional deformation) and stress (force per unit area) interact with one another in a material.

The stiffness of a solid or its resistance to elastic deformation under stress is measured by the Young's modulus (E or Y). It connects strain (proportional deformation) along an axis or line to stress (force per unit area).

Given elongation delta L=1.10 m

Mass of A=65.0 kg,

L=45.0 m

D=7 mm

radius =  r=7/2=3.5 mm

Since we know the Young's Modulus (Y) Can be defines as [tex]Y=\frac{\text { stress }}{\text { strain }}=\frac{\mathrm{F} / \mathrm{A}}{\Delta l / L}[/tex]

Now, (4/{L)=(1.10 m/45.0 m)=0.0244

[tex]\begin{aligned}\ \frac{F}{A}=\frac{M g}{A} & =\frac{65 \mathrm{~kg} \times 9.8 \mathrm{~m} / \mathrm{sec}^2}{\pi r^2} \\& =\frac{65 \mathrm{~g} \times 9.8 \mathrm{~m} / \mathrm{sec}^2}{3.14 \times\left(3.5 \times 10^{-3}\right)^2} \\& =\frac{65 \times 9.8}{3.14 \times 12.25 \times 10^{-6}} \mathrm{~N} / \mathrm{m}^2 \\& =\frac{637}{38.465} \times 10^6 \mathrm{~N} / \mathrm{m}^2 \\\frac{F}{A} & =16.56 \times 10^6 \mathrm{~N} / \mathrm{m}^2\end{aligned}$$[/tex]

Therefore, the value of Young's modulus will be

[tex]$$\begin{aligned}& Y=\frac{F / A}{\Delta l / L}=\frac{16.56 \times 10^{-6} \mathrm{~N} / \mathrm{m}^2}{0.0244}=\left(678.688 \times 10^6\right) \mathrm{N} / \mathrm{m}^2 \\& Y=6.78 \times 10^8 \mathrm{~N} / \mathrm{m}^2\end{aligned}$$[/tex]

For more questions on Young's modulus

https://brainly.com/question/28757637

#SPJ4

The acceleration is still -9.81 m/s2, and the instantaneous velocity of the shuttlecock when it hits the ground is [tex]V_{int}[/tex] = [tex]\sqrt{U^{2} + 19.6H }[/tex]

Acceleration is determined as the rate of change of velocity of an object with respect to time. Acceleration is represented by the SI unit is meter per second squared (m/[tex]s^{2}[/tex]). Acceleration is denoted by "a".

Instantaneous velocity is the rate of change of position for a time interval which is almost zero (very small). The magnitude of the instantaneous velocity is instantaneous speed. It is measured by using SI unit m/s.

Mathematically, the equation for acceleration is:

a =  [tex]v\frac{dv}{dt}[/tex]

ah = [tex]v^{2}[/tex] - [tex]u^{2}[/tex]

Where the acceleration is still -9.81 m/s2

Hence, [tex]v^{2}[/tex] - [tex]u^{2}[/tex] = 2 (-9.81) * -H

Therefore, [tex]v_{int}[/tex] = [tex]\sqrt{U^{2} + 19.6H }[/tex]

To know more about acceleration here

https://brainly.com/question/12550364

#SPJ4  

Answer:

Explanation:

option 1 - A and B move with the same speed INCORRECT because the lines have different slopes

option 2 - B moves with non-uniform speed  INCORRECT because the line for B is straight

option 3 - A completes his journey early INCORRECT because A ends his journey at about 11:45 after going about 42 km. B finishes his journey at about 11:35.

option 4 - B overtakes A at 11:10 a.m.  CORRECT.  They meet at the 30 km mark at 11:10, which is where the lines intersect.

Answer:

$4.80

Explanation:

Total energy used is found with this formula:
[tex]E = Pt[/tex]

where:
[tex]E[/tex] is energy (in kilowatt-hours)
[tex]P\\[/tex] is power ( in Kilowatts)
[tex]t[/tex] is time ( in Hours)

We can find the total power consumption by adding all the appliances, then dividing by 1000 to convert it from Watts to Kilowatts:

[tex]\frac{(40*2)+120}{1000} =0.2kW[/tex]

And then find [tex]E[/tex] with 5 hours a day for 30 days:

[tex]E= 0.2*(5*30)=30kWh[/tex]

Thus, cost needed would be:

$0.16 × 30 = $4.80

Answer:

23.4 kg m/s

Explanation:

p = mv = 0.013kg × 1800m/s = 23.4 Kg.m/s

Answer:

i think its time stirred, double check. i hope it helped ;)

Explanation:

On a day with complete cloud cover, the visible light headed toward Earth: The clouds reflect much of it back to space, though some still reaches the surface.

When the sun shines, the Earth's atmosphere scatters it in all directions. This is why certain sections of the Earth appear brighter than others during the day—the Sun's light has been reflected off of the ground and other objects. When the planet is completely clouded over, no light reaches Earth at all. The term "nowhere" refers to the fact that there is no such thing as a sunrise since there is no such thing as a dawn. On a cloudy day, visible light directed toward the earth is misdirected and darkened by the clouds. This is due to the fact that shorter wavelengths of visible light scatter more than longer wavelengths. Rayleigh scattering is the name given to this phenomena.

We can learn more about Rayleigh scattering here:

https://brainly.com/question/26851124#

#SPJ4

The velocity of the ball is constant the entire time the ball is moving in a circular path at the end of a rope, in a uniform circular motion.

Hence, Option D is correct.

To know more about Circular motion here

https://brainly.com/question/28503060

#SPJ4

Explanation:

convert 1= 30 amp

which Car has the dead

battery ?

CarA

Car B

Ams => The Current i flows into the of the Battery of Qax A.

Posithe terminal

So. By using Passinge sign Convention.

Power P₁ = Vi = 12X 30

PA = 360 Watt (the)

=>Power is Positive So Car Ahabsorbing So now we can say car A has dead battery.

Power,

Connection is maintained for t = 1 min. Energy toonsffered to the dead battery

=> we know w(t) = Work = Emergy t S. Pdt fo W (1 = imin) = 360 dt

t = 60 sec = 1 min.

36. (t), 60

360 X60

|w[t=1mm) = 21.60 *Jure.

The average speed of the car is 24 m/s. The average speed of the car is therefore below 25.0 m/s.

The description of rapidity. a change in the location of an object in either direction or speed. How fast something is going is determined by the distance travelled and the time required to cover that distance. Speed is a scalar quantity since it just has an arrow-like direction and no magnitude.

The entire movement of an item, independent of direction, is called distance. Distance may be characterized as the quantity of ground covered, regardless of the starting or finishing points of an item.

distance (d) = 9 miles = 14.4841 km

d = 14484.1 m

1 miles = 1609.34 m

t₁= 14484.1/ 20

 = 724.2 sec

t₂= 14484.1/ 30= 482.8 sec

total time ( t) = t+t

t= 724.2+ 482.8 = 1207 sec

Vavg = 2d/t= 2*14484.1/1207

Vavg = 24m/s

24< 25

lessthan 25m/s

car average speed (Vavg) = 24 m/s.

Therefore, the car average speed is 24 m/s.

Learn more about Speed from the given link.

https://brainly.com/question/13262646

#SPJ4