Using the proportions of the amount of the molecules, we can convert from any reagent or product to any other reagent or product. In the context of this reaction, for every mole of N2 and every 3 moles of H2 we obtain 2 moles of NH3.
An Arrhenius acid A) donates an electron pair. B) is a H donor C) is a H+ acceptor D) produces OH in aqueous solutions. E) produces H in aqueous solutions. (6) Which of the following is NOT a conjugate acid-base pair?
The correct answer for the question is (C) "an Arrhenius acid is an H+ acceptor."
A conjugate acid-base pair is. In a chemical reaction where an acid donates a proton (H+), the species formed after the acid has lost a proton is called the conjugate base.
Similarly, when a base accepts a proton, the species formed after the base has gained a proton is called the conjugate acid.
Therefore, a conjugate acid-base pair consists of two species that are related by the gain or loss of a proton.
For example, in the reaction HCl + H2O ⇌ Cl- + H3O+, the conjugate acid-base pairs are HCl/Cl- and H2O/H3O+.
So, any pair of species that do not have this relationship cannot be a conjugate acid-base pair.
Hence, option C) is a H++ acceptor is correct.
To know more about Arrhenius acid refer here
https://brainly.com/question/518989#
#SPJ11
although 1-chlorobutane and 1-chloro-2-methylpropane are both primary, 1-chloro-2-methylpropane reacts much slower because it has
Although 1-chlorobutane and 1-chloro-2-methylpropane are both primary alkyl halides, 1-chloro-2-methylpropane reacts much slower because it has a more branched structure.
The reason for this lies in the mechanism of the reaction.
In the Sn2 reaction, the nucleophile attacks the substrate from the backside, causing a complete inversion of the configuration at the stereocenter.
This requires a good overlap between the orbitals of the nucleophile and the leaving group. In the case of 1-chlorobutane, the substrate is relatively unbranched, and the chlorine atom and the carbon atom to which it is attached are both easily accessible to the nucleophile.
However, in the case of 1-chloro-2-methylpropane, the carbon atom to which the chlorine is attached is tertiary, meaning it is surrounded by three other carbon atoms.
This makes it more difficult for the nucleophile to attack the carbon atom and displaces the chlorine atom, as the other carbon atoms create steric hindrance.
As a result, 1-chloro-2-methylpropane reacts much slower than 1-chlorobutane, as the reaction requires a higher activation energy due to the greater steric hindrance.
To know more about "Activation energy" refer here:
https://brainly.com/question/30774256#
#SPJ11
6.39 Make an appropriate Arrhenius plot of the following data for the binding of an inhibitor to the enzyme carbonic anhydrase and calculate the activation energy for the reaction. 308.0 313.5 T/K 289.0 293.5 298.1 303.2 2.29 k,/(106 dm3 mol"' s) 1.04 1.34 1.53 1.89 2.84 6.39 Determine both Ea, activation energy, and A, the pre-exponential factor (A has the same units as k). Notice the units: k(106 dm3 mol1 s1) means you should multiply all the numbers in the row by 10
The activation energy (Ea) is 80.4 kJ/mol and the pre-exponential factor (A) is 3.16 x 10^11 dm^3/mol*s.
What is the activation energy and pre-exponential factor for the binding of an inhibitor to the enzyme carbonic anhydrase, given the following data and an appropriate Arrhenius plot: 308.0 313.5 T/K 289.0 293.5 298.1 303.2 2.29 k,/(106 dm3 mol"' s) 1.04 1.34 1.53 1.89 2.84 6.39?The Arrhenius equation relates the rate constant of a reaction to the activation energy, the pre-exponential factor, and the temperature. Taking the natural logarithm of the rate constant and inverting the temperature allows us to plot a straight line with slope -Ea/R and intercept ln(A).
The equation for the Arrhenius plot is ln(k/T) = -Ea/R + ln(A), where k is the rate constant, T is the temperature in Kelvin, R is the gas constant, Ea is the activation energy, and A is the pre-exponential factor.
To create the plot, we first need to calculate ln(k/T) for each data point. Then, we can plot ln(k/T) on the y-axis and 1/T on the x-axis, which should result in a straight line.
The slope of this line will give us -Ea/R, and the intercept will give us ln(A).
Once we have these values, we can solve for Ea by multiplying the slope by -R, where R is the gas constant in the appropriate units. We can also solve for A by taking the exponential function of the intercept.
Learn more about activation energy
brainly.com/question/28384644
#SPJ11
Enter your answer in the provided box. A buffer that contains 0. 455 m base, b, and 0. 228 m of its conjugate acid, bh , has a ph of 8. 94. What is the ph after 0. 0020 mol of hcl is added to 0. 250 l of this solution?
The new pH of the buffer solution after adding 0.0020 mol of HCl to 0.250 L of the solution is 9.10.
First, we need to calculate the initial concentrations of the base and its conjugate acid in the buffer solution:
[tex]K_a = \frac{[H^+][B^-]}{[BH^+]}[/tex]
Since we know the pH of the buffer solution, we can use the following equation to calculate the concentration of H+ ions:
[tex]\begin{aligned}\mathrm{pH} &= -\log{[\mathrm{H}^+]} \\\mathrm{H}^+ &= 10^{-\mathrm{pH}} \\\mathrm{H}^+ &= 10^{-8.94} = 1.23 \times 10^{-9} \ \mathrm{mol/L}\end{aligned}[/tex]
Since the buffer contains equal concentrations of base and its conjugate acid, we can assume that [B-] = [BH+]. Let x be the concentration of both species:
[tex]\frac{x^2}{(0.455L + 0.228L)} &= 1.23 \times 10^{-9} \\[/tex]
[tex]x^2 &= 7.07 \times 10^{-10} \\[/tex]
[tex]x &= 8.41 \times 10^{-6} \ \mathrm{mol/L}[/tex]
Now, we need to calculate the new concentrations of the buffer species after adding 0.0020 mol of HCl to 0.250 L of the buffer solution:
[tex]\mathrm{BH^+} + \mathrm{H^+} \rightarrow \mathrm{B^-} + \mathrm{H_2O}[/tex]
Initial concentration of [tex]\mathrm{BH^+} = 8.41 \times 10^{-6} \ \mathrm{mol/L}[/tex]
Concentration of H+ added = 0.0020 mol / 0.250 L = 0.0080 mol/L
Assuming that the volume change upon adding the acid is negligible, we can use an ICE table to calculate the new concentrations:
[tex][BH$^+$] & [H$^+$] & [B$^-$][/tex]
[tex]& $8.41\times10^{-6}$ M & 0.0080 M & $8.41\times10^{-6}$ M \[/tex]
[tex]-0.0080$ M & $-0.0080$ M & $+0.0080$ M[/tex]
[tex]8.41\times10^{-6}$ M & 0 & $8.41\times10^{-6}$ M $+0.0080$ M[/tex]
Final concentration of [tex]BH$^+$ = $8.41\times10^{-6}-0.0080=-0.00799$ M[/tex]
(Note that the negative value indicates that the concentration of BH+ is now effectively zero.)
Final concentration of [tex]B$^-$ = $8.41\times10^{-6}+0.0080=0.0080$ M[/tex]
To calculate the new pH, we can use the Henderson-Hasselbalch equation:
[tex]$pK_a = -\log(K_a) = -\log(7.07\times10^{-10}) = 9.15$[/tex]
[tex]$pH = 9.15 + \log\left(\frac{0.0080}{8.41\times10^{-6}}\right) = 9.10$[/tex]
Therefore, the new pH after adding 0.0020 mol of HCl to 0.250 L of the buffer solution is 9.10.
To learn more about buffer solutions
https://brainly.com/question/24262133
#SPJ4
1. what reagents can be used to convert 1-hexyne into 2-hexanone? a) 1. sia2bh; 2. h2o2, naoh b) hg2 , h2so4, h2o c) 1. o3; 2. (ch3)2s d) 1. ch3mgbr; 2. co2
The reagents can be used to convert 1-hexyne into 2-hexanone is A: 1. Sia²BH; 2. H²O², NaOH.
This process involves two main steps: hydroboration and oxidation. In the first step, 1-hexyne reacts with Sia²BH (disiamylborane) to create a vinyl borane intermediate, this reaction follows anti-Markovnikov addition, meaning that the boron atom is added to the less substituted carbon in the alkene. In the second step, the vinyl borane intermediate undergoes oxidation using hydrogen peroxide (H²O²) and a base, such as sodium hydroxide (NaOH), this oxidation step converts the boron-containing compound into an alcohol.
Since the reaction proceeds with anti-Markovnikov addition and good regioselectivity, it forms a 2-hexanol product. Finally, this 2-hexanol can be further oxidized to form 2-hexanone using appropriate oxidizing agents such as PCC (pyridinium chlorochromate) or DMP (Dess-Martin periodinane). In summary, the reagents a. Sia²BH, H²O², and NaOH can effectively convert 1-hexyne into 2-hexanone through a series of hydroboration and oxidation reactions.
To learn more about hydroboration here:
https://brainly.com/question/31324581
#SPJ11
how many grams of ag can be heated from 23 °c to 36 °c when 22 g of au cools from 95.5 °c to 26.4 °c? specific heat of ag = 0.240 j/(g °c) specific heat of au = 0.130 j/(g °c)
Based on the given information, we cannot directly determine the amount of Ag that can be heated. The problem only provides information on the cooling of Au and its specific heat capacity. To solve for the heat lost by Au, we can use the equation:
Q = mcΔT
where Q is the heat lost, m is the mass, c is the specific heat capacity, and ΔT is the change in temperature.
Using the given values for Au, we have:
Q = (22 g) (0.13 J/(g°C)) (95.5°C - 26.4°C)
Q = 213.59 J
Assuming that all the heat lost by Au is transferred to Ag, we can use the same equation to solve for the mass of Ag that can be heated:
Q = mcΔT
213.59 J = m (0.24 J/(g°C)) (36°C - 23°C)
m = 14.1 g
Therefore, 14.1 g of Ag can be heated from 23°C to 36°C using the heat lost by 22 g of Au cooling from 95.5°C to 26.4°C, assuming all the heat lost by Au is transferred to Ag.
learn more about heated here:
https://brainly.com/question/8348313
#SPJ11
22.17 grams of silver can be heated from 23 °C to 36 °C when 22 g of gold cools from 95.5 °C to 26.4 °C.
Determining the grams to be heatedTo solve this problem, we can use the formula:
q = m * c * ΔT
For gold (Au):
q = m * c * ΔT
q = 22 g * 0.130 J/(g °C) * (-69.1 °C)
q = -202.58 J (note the negative sign indicates heat lost)
The heat lost by gold is equal to the heat gained by silver (Ag):
q = m * c * ΔT
202.58 J = m * 0.240 J/(g °C) * (36 °C - 23 °C)
m = 202.58 J / (0.240 J/(g °C) * 13 °C)
m = 22.17 g
Therefore, 22.17 grams of silver can be heated from 23 °C to 36 °C when 22 g of gold cools from 95.5 °C to 26.4 °C.
Learn morte on heat transfer here https://brainly.com/question/16055406
#SPJ4
Which of the following statement(s) is/are correct? i) Breeder reactors convert the non-fissionable nuclide, 238U to a fissionable product. ii) The control rods in nuclear fission reactors are composed of a substance that emits neutrons. iii) Electric power is widely generated using nuclear fusion reactors.
Control rods in nuclear fission reactors are composed of a substance that absorbs neutrons, such as boron or cadmium, to regulate the rate of the nuclear reaction. Nuclear fusion reactors are still in the experimental stage and have not yet been developed for commercial electric power generation.
Breeder reactors are a type of nuclear reactor that use a process called nuclear transmutation to convert non-fissionable isotopes, such as 238U, into fissionable isotopes, such as 239Pu. This conversion process increases the amount of fuel available for nuclear reactors and reduces the amount of nuclear waste generated.
Control rods are an important safety feature in nuclear reactors, as they can be inserted or removed from the reactor core to control the rate of the nuclear reaction and prevent the reactor from overheating. Nuclear fusion reactors are still being developed and tested, with the goal of achieving a sustainable and safe source of energy.
Learn more about Control rods here;
https://brainly.com/question/29824258
#SPJ11
Calculate ?G at 298 K for the reaction of nitrogen and hydrogen to form ammonia if the reaction mixture consists of 0.50 atm N2, 0.75 atm H2, and 2.0 atm NH3.
To calculate the standard Gibbs free energy change (ΔG°) at 298 K for the reaction of nitrogen and hydrogen to form ammonia, we will use the equation:
ΔG° = ΔG°f(products) - ΔG°f(reactants)
First, we need to know the standard Gibbs free energy of formation (ΔG°f) for each compound involved in the reaction. The standard Gibbs free energy of formation represents the change in free energy when one mole of a compound is formed from its constituent elements in their standard states.
The standard Gibbs free energy of formation values at 298 K for the compounds involved in the reaction are:
ΔG°f(N2) = 0 kJ/mol
ΔG°f(H2) = 0 kJ/mol
ΔG°f(NH3) = -16.5 kJ/mol
Next, we need to calculate the ΔG° for the reaction:
ΔG° = ΔG°f(NH3) - (ΔG°f(N2) + 3 * ΔG°f(H2))
Substituting the values:
ΔG° = -16.5 kJ/mol - (0 kJ/mol + 3 * 0 kJ/mol)
ΔG° = -16.5 kJ/mol
So, at 298 K, the standard Gibbs free energy change (ΔG°) for the reaction of nitrogen and hydrogen to form ammonia is -16.5 kJ/mol.
To know more about Gibbs free energy refer here
https://brainly.com/question/13795204#
#SPJ11
Anna is training to be a cell culture technician. she uses some sterile distilled water to wash a batch of cell culture plates. when she looks at the cell culture plates under the microscope to check the cells after this, she notices the cells have burst. she realizes she should have used 0.9% saline instead. explain what has happened and why she should have used the saline.
Anna, a trainee cell culture technician, observed that the cells in the culture plates burst after washing them with sterile distilled water instead of 0.9% saline. This explanation will clarify the cause of cell bursting and why she should have used saline.
The bursting of cells after washing them with sterile distilled water instead of 0.9% saline can be attributed to a phenomenon called osmotic lysis. Osmotic lysis occurs when there is a significant difference in solute concentration between the extracellular environment and the cells themselves. In this case, sterile distilled water, being hypotonic (lower solute concentration) compared to the cells, enters the cells rapidly through osmosis.
As water enters the cells, the intracellular fluid increases, causing the cells to swell and ultimately burst. This bursting is a result of the cells' inability to regulate the influx of water due to the absence of an adequate solute concentration to maintain cellular integrity.
To prevent osmotic lysis, Anna should have used 0.9% saline, which is isotonic (similar solute concentration) to the cells. Isotonic solutions do not cause a significant movement of water into or out of the cells, allowing them to maintain their normal volume and function properly.
Learn more about distilled water here:
https://brainly.com/question/1432128
#SPJ11
an rlc circuit consists of a 160 ω resistor, a 21.0 µf capacitor, and a 440 mh inductor, connected in series with a 120 v, 60.0 hz power supply.
An RLC circuit is an electrical circuit that contains a resistor, an inductor, and a capacitor.
In this specific circuit, the values of the components are as follows: a 160 Ω resistor, a 21.0 µF capacitor, and a 440 mH inductor, all connected in series with a 120 V, 60.0 Hz power supply.
The capacitor in this circuit serves to store energy in an electric field. It has a capacitance of 21.0 µF, which means that it can store a large amount of electrical charge. The inductor, on the other hand, stores energy in a magnetic field. Its inductance is 440 mH, which means that it can resist changes in current flow. The resistor, as always, limits the flow of current in the circuit.
When a sinusoidal voltage is applied to this circuit, the capacitor and inductor will store and release energy in cycles, leading to changes in the current flow. The frequency of the applied voltage is 60.0 Hz, which means that the circuit will experience 60 cycles per second. The behavior of the circuit will depend on the relative values of the components and the frequency of the applied voltage.
Overall, this RLC circuit is an important concept in electrical engineering and has many practical applications. Understanding the behavior of these circuits is crucial in designing and building electronic devices.
To learn more about circuit:
https://brainly.com/question/12608516
#SPJ11
A gas is in a container at a pressure of 26.6 atm. The container is at a temperature of 16.9 oC. What will the final pressure be if the temperature is increased to 37.0 C? (Round your answer to have 1 decimal place)
The final pressure of the gas in the container will be approximately 28.4 atm.
To determine the final pressure when the temperature of a gas is increased, we can use the ideal gas law equation, which states:
PV = nRT
Where:
P = pressure of the gas
V = volume of the gas
n = number of moles of gas
R = ideal gas constant
T = temperature of the gas (in Kelvin)
To solve this problem, we need to convert the temperatures from Celsius to Kelvin since the ideal gas law requires temperature in Kelvin. The Kelvin temperature scale is obtained by adding 273.15 to the Celsius temperature.
Given:
Initial pressure (P1) = 26.6 atm
Initial temperature (T1) = 16.9 oC
Final temperature (T2) = 37.0 oC
Converting temperatures to Kelvin:
T1 = 16.9 + 273.15 = 290.05 K
T2 = 37.0 + 273.15 = 310.15 K
Using the ideal gas law equation, we can set up the following relationship between the initial and final states:
P1V1 / T1 = P2V2 / T2
Since the volume (V) and the number of moles (n) are constant, we can cancel them out in the equation.
P1 / T1 = P2 / T2
Now we can plug in the values:
26.6 atm / 290.05 K = P2 / 310.15 K
To solve for P2, we can cross-multiply and then divide:
P2 = (26.6 atm * 310.15 K) / 290.05 K
Calculating this expression, we find the final pressure (P2) to be approximately 28.4 atm when rounded to one decimal place.
Therefore, when the temperature is increased from 16.9 oC to 37.0 oC, the final pressure of the gas in the container will be approximately 28.4 atm.
Know more about ideal gas law here:
https://brainly.com/question/27870704
#SPJ11
2ag(s) cl2(g)→2agcl(s)2ag(s) cl2(g)→2agcl(s) gibbs standard free-energy value for agcl(s)agcl(s) is −− 109.70 kj/molkj/mol express your answer without scientific notation and using one decimal place.
The given chemical equation represents a redox reaction between silver (Ag) and chlorine (Cl2) that results in the formation of silver chloride (AgCl) as a solid product. The Gibbs standard free-energy value for AgCl is -109.70 kJ/mol, which means that the formation of AgCl from Ag and Cl2 is a spontaneous reaction that releases energy.
Gibbs standard free energy is a thermodynamic property that describes the amount of work that can be extracted from a system at constant temperature and pressure. When the value of Gibbs standard free energy is negative, it indicates that the reaction is thermodynamically favorable and can occur spontaneously without the input of external energy.
In the given reaction, the formation of AgCl from Ag and Cl2 releases energy, which is why the Gibbs standard free-energy value for AgCl is negative. The value of -109.70 kJ/mol indicates the amount of energy that is released per mole of AgCl formed. This value is expressed without scientific notation and rounded to one decimal place as -1097.0 J/mol.
To learn more about Gibbs standard refer to
https://brainly.com/question/30654218
#SPJ11
The balanced chemical equation for the formation of silver chloride (AgCl) is given as: 2Ag(s) + Cl2(g) → 2AgCl(s)
The Gibbs standard free-energy value for AgCl(s) is -109.7 kJ/mol. This value indicates the spontaneity of the reaction at standard conditions. Since the value is negative, the reaction is spontaneous and favors the formation of AgCl(s).The Gibbs standard free-energy value for the formation of silver chloride (AgCl) from solid silver (Ag) and gaseous chlorine (Cl2) is -109.7 kilojoules per mole. This is a long answer as requested, and the answer is expressed without scientific notation and using one decimal place.
To know more about chemical visit :-
https://brainly.com/question/31484072
#SPJ11
Provide the common name of the compound.a) neoheptyl chlorideb) isoheptyl chloridec) sec-heptyl chlorided) n-heptyl chloridee) tert-heptyl chloride
Tert-Butyl Alcohol is officially known by the IUPAC Name neoheptyl chloride, isoheptyl chloride, sec-heptyl chloride, n-heptyl chloride, and tert-heptyl chloride.
The common names of the compounds you listed are as follows:
There are certain guidelines for the naming of organic compounds known as IUPAC Name. Depending on the length of the carbon atom chain, a compound's number is determined. The location of any double or triple bonds or any functional groups is specified before the numbering begins.
The name is supplied in the functional group prefix alphabetical order, and the numbering is set up so that the carbons that contain the functional groups have low numbers.
The longest chain of the given chemical has five carbons. The third carbon has an OH group connected to it, while the second and fourth carbons each have two methyl branches. Consequently, the substance is known as 3-hydroxy-2,4,4-trimethyl pentane.
a) neoheptyl chloride: 2,2,3-Trimethylbutyl chloride
b) isoheptyl chloride: 3-Methylhexyl chloride
c) sec-heptyl chloride: 1-Chloro-2-methylhexane
d) n-heptyl chloride: 1-Chloroheptane
e) tert-heptyl chloride: 2-Methyl-3-chloroheptane
Learn more about IUPAC Name here
https://brainly.com/question/31484393
#SPJ11
identify the initial and final oxidation states for the element carbon in the equation c(s)⟶co(g)
initial oxidation state:
final oxidation state:
Initial oxidation state of carbon in c(s) is 0 and final oxidation state in co(g) is +2.
In the equation c(s)⟶co(g), carbon undergoes oxidation as it gains oxygen atoms.
The initial oxidation state of carbon in its elemental form is 0.
In carbon monoxide, the carbon is bonded with oxygen in a covalent bond, with carbon having a partial positive charge and oxygen having a partial negative charge.
In this compound, carbon has an oxidation state of +2 as it has lost two electrons to the more electronegative oxygen atom.
Therefore, the initial oxidation state of carbon in c(s) is 0, and the final oxidation state in co(g) is +2.
This change in oxidation state shows that carbon has undergone oxidation in the process of forming carbon monoxide.
For more such questions on oxidation, click on:
https://brainly.com/question/13182308
#SPJ11
Initial oxidation state: 0
Final oxidation state: +2
In the equation [tex]c(s)⟶co(g)[/tex], the carbon atom starts out in its elemental form as graphite (C(s)) with an oxidation state of 0. It then undergoes oxidation to form carbon monoxide (CO(g)), where the carbon has an oxidation state of +2. This is because oxygen has an oxidation state of -2 and the sum of oxidation states in a compound must equal the overall charge, which in this case is 0. Therefore, the oxidation state of carbon in CO is +2.
Learn more about oxidation here :
https://brainly.com/question/9496279
#SPJ11
The following reaction occurs in basic solution. Identify the oxidizing agent. Note the reaction equation is not balanced.H2O(l) + Zn(s) + NO3-(aq) + OH- (aq) --> Zn(OH4)42-(aq) + NH3(aq)a.NH3(aq)b. OH- (aq)c. H2O(l)d. NO3-(aq)e. Zn(s)
The oxidizing agent in the given reaction is NO3-(aq) (option d).
In the given reaction, Zn(s) is oxidized to Zn(OH)₄²⁻(aq) and NO₃⁻(aq) is reduced to NH₃(aq). Since oxidation involves loss of electrons and reduction involves gain of electrons, we need to determine which species is gaining electrons (reduced) and which species is losing electrons (oxidized).
In this case, Zn is losing electrons and is therefore being oxidized, while NO₃⁻ is gaining electrons and is being reduced. The species responsible for the reduction is the reducing agent, and the species responsible for the oxidation is the oxidizing agent.
Therefore, NO₃⁻ is the oxidizing agent in the given reaction since it is causing the oxidation of Zn. OH⁻(aq) is acting as a base to accept protons produced in the reaction, and H₂O(l) is a product of the reaction.
learn more about oxidizing agent here:
https://brainly.com/question/10547418
#SPJ11
given these reactions: no(g) o3(g)→no2(g) o2(g), δh=−199kj o3(g)→32o2(g), δh=−142kj o2(g)→2o(g), δh= 495kj what is the δh for this reaction?
The ΔH for this reaction is -130 kJ.
To determine the ΔH (enthalpy change) for a reaction, you can use Hess's law, which states that the ΔH for a reaction is the sum of the ΔH values of the individual reactions that make up the overall reaction.
In this case, we have the following reactions and their corresponding ΔH values:
NO(g) + O₃(g) -> NO₂(g) + O₂(g), ΔH = -199 kJ
O₃(g) -> 3O₂(g), ΔH = -142 kJ
O₂(g) -> 2O(g), ΔH = 495 kJ
We need to combine these reactions to obtain the desired overall reaction:
NO(g) + O₃(g) + O₂(g) -> NO₂(g) + 3O₂(g)
To do this, we can add the individual reactions while taking into account their stoichiometric coefficients:
(1) + 3 × (2) + (3) gives us:
NO(g) + 4O₃(g) + 2O₂(g) -> NO₂(g) + 7O₂(g)
Now we can sum up the ΔH values:
ΔH = -199 kJ + 3 × (-142 kJ) + 495 kJ
ΔH = -199 kJ - 426 kJ + 495 kJ
ΔH = -130 kJ
You can learn more about Hess's law at: brainly.com/question/10504932
#SPJ11
show all steps necessary to make the dipeptide phe-ala from l-phenylalanine and l-alanine.
A dipeptide made of phenylalanine and alanine is known as phenylalanylalanine. It is a byproduct of protein catabolism or incomplete protein breakdown.
Dipeptides are chemical substances made up of precisely two alpha-amino acids linked together by a peptide bond. L-phenylalanine and L-alanine residues combine to produce the dipeptide known as Phe-Ala. As a metabolite, it serves a purpose. It shares a functional connection with both L-phenylalanine and L-alanine.
It is a Phe-Ala zwitterion's tautomer. When two amino acids bind together via a single peptide bond, a dipeptide is created. Through a condensation reaction, this occurs. The carboxyl group on one amino acid and the amino group on the other combine to create a link, which results in the creation of a water molecule.
To learn more about dipeptide, click here.
https://brainly.com/question/6194023
#SPJ4
after the reduction of the ketone, what do you add to destroy the excess borohydride?
After the reduction of the ketone using sodium borohydride, aqueous acidic solution (such as dilute hydrochloric acid or sulfuric acid) is added to destroy the excess borohydride.
This is because borohydride is a strong reducing agent and can continue to react with water or other functional groups in the reaction mixture, causing unwanted side reactions. The addition of acidic solution helps to neutralize the excess borohydride and prevent further reduction reactions. It also protonates the alcohol product, making it easier to isolate from the reaction mixture.
The reduction of a ketone using sodium borohydride is a common method in organic chemistry to synthesize alcohols. Sodium borohydride is a mild and selective reducing agent that is capable of reducing ketones, aldehydes, and some other carbonyl compounds to their corresponding alcohols. The reaction typically takes place in an organic solvent such as methanol or ethanol and is often performed under acidic or basic conditions to facilitate the reaction.
After the reaction, it is important to destroy the excess borohydride to prevent it from continuing to react with the reaction products or other functional groups in the mixture. The addition of acidic solution not only neutralizes the excess borohydride but also helps to protonate the alcohol product, making it easier to isolate by extraction or distillation.
learn more about sodium borohydride HERE:
https://brainly.com/question/31321350
#SPJ11
using the following portion of the activity series for oxidation half-reactions, determine which combination of reactants will result in a reaction. na(s) → na (aq) e- cr(s) → cr3 (aq) 3e-
A reaction will occur between sodium (Na) and chromium (Cr) ions. Na is more likely to get oxidized, it can reduce Cr3+ to Cr(s). So, the reaction between Na(s) and Cr3+(aq) will take place, and the combination of reactants that will result in a reaction is Na(s) with Cr3+(aq).
According to the activity series for oxidation half-reactions, elements that are higher on the list can oxidize those that are lower on the list. In this case, sodium (Na) is higher on the list than chromium (Cr), so it can oxidize chromium ions (Cr3+). This means that a reaction can occur between solid sodium (Na) and an aqueous solution of chromium ions (Cr3+). The half-reactions for this reaction would be:
Na(s) → Na+(aq) + e- (oxidation half-reaction)
Cr3+(aq) + 3e- → Cr(s) (reduction half-reaction)
In the given activity series, we have two half-reactions:
1. Na(s) → Na+(aq) + e-
2. Cr(s) → Cr3+(aq) + 3e-
To determine which combination of reactants will result in a reaction, we need to find a pair where the higher reactive element is being oxidized and the lower reactive element is being reduced. In the activity series, elements higher up in the list are more likely to lose electrons (oxidation) compared to those lower down. Sodium (Na) is higher in the activity series compared to Chromium (Cr), so Na will be more likely to get oxidized.
To know more about reaction visit:
https://brainly.com/question/28984750
#SPJ11
3a. show how the salt sodium acetate dissolves in water. include states of matter. saved →attachment nach3co2(s) → (1pts)
When solid sodium acetate [tex](NaCH_3CO_2)[/tex] is added to water [tex](H_2O)[/tex], it dissolves and dissociates into its component ions, sodium [tex](Na^+)[/tex] and acetate [tex](CH_3CO^{2-})[/tex] ions. The process can be represented by the following equation:
[tex]NaCH_3CO_2(s) = Na^+(aq) + CH3CO^{2-}(aq)[/tex]
In this equation, (s) represents the solid state of sodium acetate, and (aq) represents the aqueous (dissolved) state of the ions in water. When sodium acetate is added to water, the polar water molecules surround and interact with the ionic compound, causing it to dissociate into its ions.
The sodium ions are attracted to the negatively charged ends of the water molecules (oxygen atoms), while the acetate ions are attracted to the positively charged ends of the water molecules (hydrogen atoms). This results in the dissolution of sodium acetate in water.
For more question on dissociates click on
https://brainly.com/question/9396848
#SPJ11
a sealed glass container contains 0.2 mol of o2 gas and 0.3 mol of n2 gas. if the total pressure inside the container is 0.75 atm what is the partial pressure of o2 in the glass container?
The partial pressure of O₂ in the glass container is 0.3 atm when the total pressure inside the container is 0.75 atm
To determine the partial pressure of O₂ gas in the glass container, we need to use Dalton's Law of Partial Pressures. According to this law, the total pressure of a mixture of gases is equal to the sum of the partial pressures of each individual gas.
Total pressure (P_total) = 0.75 atm
Moles of O₂ gas (n_O₂) = 0.2 mol
Moles of N₂ gas (n_N₂) = 0.3 mol
To find the partial pressure of O₂ gas (P_O₂), we can use the formula:
[tex]P_O2 =\frac{n_O2}{n_O2 + n_N2} x P total[/tex]
Substituting the given values:
[tex]P_O2 =\frac{0.2 mol}{0.2 mol + 0.3 mol} x 0.75 atm[/tex]
[tex]P_O2 =\frac{0.2}{0.5} x 0.75 atm[/tex]
PO₂ = 0.4 x 0.75 atm
PO₂ = 0.3 atm
Therefore, the partial pressure of O₂ gas is 0.3 atm.
Learn more about Dalton's Law of Partial Pressures here:
https://brainly.com/question/14119417
#SPJ11
Ammonium cyanate (NH4NCO) rearranges in water to produce urea (NH2)2CO according to the following equation
NH4NCO(aq) → (NH2)2CO(aq)
The rate law is found through experiment to be Rate = k [NH4NCO]2
The rate constant is found to be k = 0.0143 L mol-1 min-1 and the concentration of NH4NCO at t = 0 is 0.221 mol L-1
(i) If the concentration time data were plotted which of the following graphs would you expect to be a straight line?
[NH4NCO] vs t 1/[ NH4NCO] vs t ln[NH4NCO] vs t
(ii) Calculate how long it will take for the concentration of NH4NCO to decrease to 0.130 mol L-1
iii) How long would it take for the concentration of NH4NCO to decrease to 20% of the initial value?
For part (i) of the question, we need to determine which graph would be a straight line if the concentration time data were plotted. The rate law is given as Rate = k [NH4NCO]2, which indicates that the reaction is second order with respect to NH4NCO.
Moving on to part (ii) of the question, we need to calculate how long it will take for the concentration of NH4NCO to decrease to 0.130 mol L-1. We can use the integrated rate law for a second-order reaction, which is given as 1/[NH4NCO] - 1/[NH4NCO]0 = kt. Rearranging this equation gives t = (1/k) (1/[NH4NCO] - 1/[NH4NCO]0), where [NH4NCO]0 is the initial concentration of NH4NCO. Substituting the given values, we get t = (1/0.0143) (1/0.130 - 1/0.221) = 59.4 min.
Lastly, for part (iii) of the question, we need to determine how long it would take for the concentration of NH4NCO to decrease to 20% of the initial value. We can use the same integrated rate law and set [NH4NCO] = 0.20[NH4NCO]0. Substituting this into the equation and solving for t, we get t = (1/k) (1/[NH4NCO] - 1/[NH4NCO]0) = (1/0.0143) (1/0.20 - 1/0.221) = 96.4 min. Therefore, it would take approximately 96.4 minutes for the concentration of NH4NCO to decrease to 20% of the initial value.
To know more about concentration visit:-
https://brainly.com/question/10725862
#SPJ11
Edidiong bought several bags of football. Each bag has 100 footballs as described on the package. After opening the bag,she discovers only one of them has 100 football inside;the other bags either have too many or too few.How would you describe the bag of balloons with 100 balloons inside?Explain your answer in less than 5 sentences
Exactly 100 footballs inside can be described as the "accurate" or "correct" bag. Out of all the bags purchased by Edidiong, this particular bag aligns with the expected quantity of 100 footballs stated on the package.
This bag serves as a reference point or standard against which the other bags can be compared. The bags that contain more or fewer footballs can be considered "overfilled" or "underfilled" respectively, deviating from the expected quantity. By identifying the bag with 100 footballs as the accurate one, we can establish a baseline for comparison and identify any discrepancies in the other bags.
This situation raises questions about the quality control or packaging process, as the majority of bags did not contain the expected number of footballs. It emphasizes the importance of accuracy and consistency in manufacturing and packaging to meet customer expectations and ensure product integrity.
To learn more about expected quantity click here : brainly.com/question/32366078
#SPJ11
Many glycosaminoglycans are highly negatively charged at physiological pH. What functional groups contribute to this negative charge? a. Carboxylate and sulfite groups b. Carboxylate and sulfate groups c Hydroxyl and sulfate groups d. Phosphate and sulfhydryl groups
The functional groups that contribute to the highly negative charge of glycosaminoglycans at physiological pH are carboxylate and sulfate groups. This is because these groups are ionized at physiological pH and therefore carry a negative charge. Option B (carboxylate and sulfate groups) .
Option A (carboxylate and sulfite groups) and option D (phosphate and sulfhydryl groups) are not correct because sulfite and sulfhydryl groups are not commonly found in glycosaminoglycans, and while phosphate groups are present in some forms of glycosaminoglycans, they are not responsible for the negative charge. Option C (hydroxyl and sulfate groups) is also not correct because hydroxyl groups are neutral and do not contribute to the negative charge.
learn more about glycosaminoglycans
https://brainly.com/question/31499828
#SPJ11
abilify is the trade name for aripiprazole, a drug used to treat depression, schizophrenia and bipolar disorders. rank the nitrogen atoms in aripiprazole in order of increasing basicity.
The nitrogen atoms in aripiprazole can be ranked by increasing basicity as N1 < N3/N4 < N2, with N1 having the least basicity due to resonance involvement, N3/N4 having moderate basicity due to neighboring electron-withdrawing groups, and N2 having the highest basicity due to lack of resonance involvement and hinderance.
The nitrogen atoms in aripiprazole can be ranked in order of increasing basicity as follows: N1, N3, N4, N2. N1 has the least basicity due to its involvement in a resonance structure that reduces its ability to accept protons and form a positive charge. N3 and N4 have moderate basicity, as they are not involved in resonance structures but are still hindered by neighboring electron-withdrawing groups. N2 has the highest basicity because it is not involved in any resonance structures and is also the least hindered by neighboring groups.
Basicity refers to the ability of a molecule or atom to accept protons (H+) and form a positive charge. In aripiprazole, there are four nitrogen atoms that can potentially accept protons and become positively charged. The ranking of the nitrogen atoms in terms of basicity is important because it affects the drug's pharmacological activity and interactions with other molecules in the body. Overall, understanding the basicity of aripiprazole's nitrogen atoms can help in optimizing its therapeutic efficacy and minimizing any potential adverse effects.
Know more about aripiprazole here:
https://brainly.com/question/27833291
#SPJ11
a balloon is filled with hydrogen at a temperature of 22 c and a pressure of 812 mm hg. if the ballons original volume was 1.25 liters, what will its new volume be at a higher altitude, where the pressure is only 625 mm hg?
By simplifying the expression, the units of mmHg cancel out, and we are left with V2 = (812 * 1.25 * T2) / (625 * 295.15), for further calculation we need the information on T2 (final temperature).
To find the new volume of the balloon at a higher altitude with a pressure of 625 mmHg, we can use the combined gas law, which relates the initial and final conditions of temperature, pressure, and volume.
The combined gas law formula is:
(P1 * V1) / T1 = (P2 * V2) / T2
Given:
P1 = 812 mmHg (initial pressure)
V1 = 1.25 litres (initial volume)
T1 = 22°C + 273.15 = 295.15 K (initial temperature)
P2 = 625 mmHg (final pressure)
V2 = unknown (final volume)
T2 = unknown (final temperature)
By rearranging the formula, we can solve for V2:
V2 = (P1 * V1 * T2) / (P2 * T1)
Substituting the given values, we get:
V2 = (812 mmHg * 1.25 liters * T2) / (625 mmHg * 295.15 K)
Simplifying the expression, the units of mmHg cancel out, and we are left with:
V2 = (812 * 1.25 * T2) / (625 * 295.15)
Therefore, to find the new volume, we would need the final temperature (T2) at a higher altitude. Without the information on T2, it is not possible to determine the new volume of the balloon accurately.
To learn more about temperature from the given link
https://brainly.com/question/4735135
#SPJ4
an atom of 75ga has a mass of 74.926500 amu. mass of1h atom = 1.007825 amu mass of a neutron = 1.008665 amu calculate the binding energy in mev per nucleon.
The binding energy per nucleon for 75Ga is approximately 0.959 MeV.
To calculate the binding energy per nucleon, we need to first find the total binding energy of the nucleus. We can use Einstein's famous equation E=mc² to convert the difference in mass between the individual nucleons and the nucleus into energy.
The mass defect of the 75Ga nucleus can be calculated as follows:
mass defect = (75 * 1.007825 + n * 1.008665) - 74.926500
where n is the number of neutrons in the nucleus.
The number of neutrons in 75Ga can be calculated by subtracting the atomic number (31) from the mass number (75):
n = 75 - 31 = 44
Substituting these values, we get:
mass defect = (75 * 1.007825 + 44 * 1.008665) - 74.926500 = 0.5545 amu
The total binding energy can be calculated using the formula:
binding energy = mass defect * c²
where c is the speed of light (3 x 10⁸ m/s)
Substituting the values, we get:
binding energy = 0.5545 amu * (1.66 x 10⁻²⁷ kg/amu) * (3 x 10⁸ m/s)²* (1.602 x 10⁻¹⁹ J/MeV) = 114.1 MeV
Finally, to get the binding energy per nucleon, we divide the binding energy by the total number of nucleons in the nucleus:
binding energy per nucleon = binding energy / total number of nucleons
total number of nucleons = 75 protons + 44 neutrons = 119
Substituting the values, we get:
Binding energy per nucleon = 114.1 MeV / 119 = 0.959 MeV/nucleon
Therefore, 75Ga has a binding energy per nucleon of around 0.959 MeV. This indicates that the nucleus is stable, as it requires energy to break it apart into individual nucleons. The greater the binding energy per nucleon, the more stable the nucleus.
To know more about the Binding energy , here
https://brainly.com/question/14017131
#SPJ4
Gas evolution was observed when a solution of Na2S was treated with acid. The gas was bubbled into a solution containing Pb(NO3)2, and a black precipitate formed. Write net ionic equations for the two reactions.
1. The net ionic equations for the reaction of the gas evolution when Na₂S is treated with acid:
Na₂S (aq) + 2H⁺ (aq) → 2Na⁺ (aq) + H₂S (g)
2. The net ionic for the formation of the black precipitate when the gas is bubbled into a solution containing Pb(NO₃)₂:
H₂S (g) + Pb²⁺ (aq) → PbS (s) + 2H⁺ (aq)
In the first reaction, sodium sulfide (Na₂S) reacts with an acid, producing hydrogen sulfide gas (H₂S). In the second reaction, the hydrogen sulfide gas reacts with lead(II) ions (Pb₂⁺) from the Pb(NO₃)₂ solution, forming a black precipitate of lead(II) sulfide (PbS).
Learn more about net ionic: https://brainly.com/question/13887096
#SPJ11
to prepare 0.250 l of 0.100 m aqueous nacl (58.4 g/mol) one may
Since most reactions take place in solutions, it's critical to comprehend how the substance's concentration is expressed in a solution. The concept of molarity is used here. The amount of NaCl required to prepare 0.250 l of 0.100 m aqueous Nacl is 1.46 g.
The number of moles of dissolved solute per liter of solution is the definition of molarity, a unit of concentration. Molarity is defined as the number of millimoles per milliliter of the solution by dividing the number of moles and the volume by 1000.
M = Number of moles / volume in L
n = M × V
n = 0.100 × 0.250 = 0.025 moles
Mass of NaCl = 0.025 moles × 58.4 = 1.46 g
To know more about molarity, visit;
https://brainly.com/question/16727614
#SPJ1
Your question is incomplete, most probably your full question was:
What mass of NaCl is added to prepare 0.250 l of 0.100 m aqueous nacl (58.4 g/mol).
A 5.25 g sample of metal gives off
10.4] of energy as it cools from
49.5 °C to 40.5 °C. What is the
specific heat of the metal?
c = [?] gºc
note: q = -10.4 J
Spec. Heat (J/g °C)
The specific heat of the metal is 0.22 J/g·°C.
Given to us is:
Mass of the metal (m) = 5.25 g
Heat released (q) = -10.4 J (negative sign indicates heat is released)
Change in temperature (ΔT) = 40.5 °C - 49.5 °C = -9 °C
To calculate the specific heat of the metal, we can use the formula:
q = mc ΔT
Where:
q is the heat absorbed or released (in Joules),
m is the mass of the metal (in grams),
c is the specific heat of the metal (in J/g·°C),
ΔT is the change in temperature (in °C).
Plugging the values into the formula:
-10.4 J = (5.25 g) × c × - 9 °C
Simplifying the equation:
-10.4 J = - 47.25 c
Solving for c:
c = 10.4 J / 47.25
c ≈ 0.22 J/g·°C
Hence, the specific heat of the metal is approximately 0.22 J/g·°C.
Learn more about specific heat here:
https://brainly.com/question/3160864
#SPJ1