Taking into account the reaction stoichiometry, 10.93 grams of CO₂ are formed when 8.50 g of methane react with 15.9 g of O₂.
Reaction stoichiometryIn first place, the balanced reaction is:
CH₄ + 2 O₂ → CO₂ + 2 H₂O
By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
CH₄: 1 mole O₂: 2 molesCO₂: 1 moleH₂O: 2 molesThe molar mass of the compounds is:
CH₄: 16 g/moleO₂: 32 g/moleCO₂: 44 g/moleH₂O: 18 g/moleThen, by reaction stoichiometry, the following mass quantities of each compound participate in the reaction:
CH₄: 1 mole ×16 g/mole= 16 gramsO₂: 2 moles ×32 g/mole= 64 gramsCO₂: 1 mole ×44 g/mole= 44 gramsH₂O: 2 moles ×18 g/mole=36 gramsLimiting reagentThe limiting reagent is one that is consumed first in its entirety, determining the amount of product in the reaction. When the limiting reagent is finished, the chemical reaction will stop.
Limiting reagent in this caseTo determine the limiting reagent, it is possible to use a simple rule of three as follows: if by stoichiometry 16 grams of CH₄ reacts with 64 grams of O₂, 8.50 grams of CH₄ reacts with how much mass of O₂?
[tex]mass of O_{2} =\frac{8.50 grams of CH_{4}x64 grams of O_{2} }{16grams of CH_{4}}[/tex]
mass of O₂= 34 grams
But 34 grams of O₂ are not available, 15.9 grams are available. Since you have less mass than you need to react with 8.50 grams of CH₄, O₂ will be the limiting reagent.
Mass of CO₂ formedThe following rule of three can be applied: if by reaction stoichiometry 64 grams of O₂ form 44 grams of CO₂, 15.9 grams of O₂ form how much mass of CO₂?
[tex]mass of CO_{2} =\frac{15.9 grams of O_{2}x44 grams of CO_{2} }{64grams of O_{2}}[/tex]
mass of CO₂= 10.93 grams
Then, 10.93 grams of CO₂ are formed when 8.50 g of methane react with 15.9 g of O₂.
Learn more about the reaction stoichiometry:
brainly.com/question/24741074
brainly.com/question/24653699
#SPJ1
How is our modern understanding of atomic structure different from thomson’s plum pudding model?
So the plum pudding model is different from the hard-sphere model of the atom because in the hard sphere model of the atom, the atom is the smallest division of matter.
What is atom?Atom, smallest unit into which matter can be divided without the release of electrically charged particles. It also is the smallest unit of matter that has the characteristic properties of a chemical element. As such, the atom is the basic building block of chemistry.Investigate varying electron configurations in electron shells around an atom's nucleus.Investigate varying electron configurations in electron shells around an atom's nucleus See all videos for this articleMost of the atom is empty space. The rest consists of a positively charged nucleus of protons and neutrons surrounded by a cloud of negatively charged electrons. The nucleus is small and dense compared with the electrons, which are the lightest charged particles in nature. Electrons are attracted to any positive charge by their electric force; in an atom, electric forces bind the electrons to the nucleus.To learn more about electron refer to:
https://brainly.com/question/860094
#SPJ4
Calculate the number of molecules present in 0.45 moles of H2O2.
Answer: 2.7099 × 10²² molecules
Explanation:
1 mole of H₂O₂ = 6.022 × 10²² molecules of H₂O₂
No . of molecules in 0.45 moles of H₂O₂ = 0.45 × 6.022 × 10²²
= 45/ 100 × 6.022 × 10²²
= 270.99 /100 × 10²²
= 2.7099 × 10²² molecules
∴ The no. of molecules present in 0.45 moles of H₂O₂ are 2.7099 × 10²² molecules .
What is the mass of 3.25 moles S8?
Answer:
3.25 Moles of Sulfur 8= 833.69 Grams
Explanation: I assumed you meant sulfur
PLEASE HELP IM ON A TIMER
a) The percentage abundance shows the amount of the isotope
b) The relative atomic mass is 122.5 amu
c) The Rutherford's model explained the planetary model of the atom.
What is the relative abundance?We have to know that the elements that we are considering must be composed of isotopes. The isotopes of the elements that we have have the same atomic number but does not have the same mass number of the element that we are looking at here.
For us to get the relative atomic mass of the element X;
Relative atomic mass = Weighted average of all the isotopes
As such we have;
(121 * 0.432) + (123 * 0.531) + (129 * 0.0370)
52.27 + 65.31 + 4.773
=122.35 amu
The Rutherford model of the atom was one of the earliest among the models of the atom and it helped in the understanding of the atom.
Learn more about atoms:https://brainly.com/question/13654549
#SPJ1
Use the following Ionic Compounds to write Disassociation Equations:
1.) Ca^+2 and NO3^-1
2.) Fe^+2 and SO4^-2
3.) Al^+3 and PO4^-3
4.) Pb^+2 and CrO4^-2
4.) Pb^+2 and CrO4^-2
When Pb^+2 and CrO4^-2 ions are dissolved in water, they will dissociate into their individual ions. The equation for this is:
PbCrO4 --> Pb^+2 + CrO4^-2
It's worth noting that these equations are showing the dissociation of the ionic compounds in aqueous solution. The degree of dissociation depends on the nature of the compound and the conditions of the solution, and it may not be 100%.
I wasn't here to learn this can someone help me
A debate among scientists on how new species form is based on speciation.
Divergence explains how organisms on Earth are related because it shows how species are similar or different.
Genes play the role in diversity of carrying information that results in changes from one generation to the next.
Natural selection is part of evolution because it explains why attributes are either in existence or have gone extinct.
What do scientists debate about how species are formed ?One of the main debates among scientists on how new species form centers around the concept of speciation. There are two main hypotheses for speciation: allopatric speciation and sympatric speciation.
Divergence is the process by which different populations or species of organisms evolve from a common ancestor over time. This process is responsible for the diversity of life on Earth. By studying the similarities and differences between different organisms, scientists can infer evolutionary relationships.
Genes are the basic units of inheritance that carry information from one generation to the next. They play a crucial role in creating diversity among organisms. The genetic diversity of a population is the result of mutations, gene flow, and genetic drift.
The theory of natural selection is one of the most important and widely accepted explanations for the diversity of life on Earth. It is the process by which certain traits become more or less common in a population over time, depending on their impact on the survival and reproduction of the organisms that possess them.
Find out more on natural selection at https://brainly.com/question/23929271
#SPJ1
Why are plants so important to humans and other animals?
Answer:
Plants are a resource of food and are also responsible for turning CO2 into O2
Explanation:
The air pressure at the top of Mount
Everest is about 199 mm Hg.
What is the pressure on Everest in
atmospheres?
[?] atm
Answer:
[tex]\huge\boxed{\sf 0.26 \ atm}[/tex]
Explanation:
Given that,
Atmospheric pressure = 199 mm Hg
To convert mm Hg to atm, we divide by 760.So,
Pressure = 199/760 atm
Pressure = 0.26 atm[tex]\rule[225]{225}{2}[/tex]
Glucose can be found in foods like honey. What happens to glucose in the body?
Answer: Unused glucose is stored mainly in the liver as glycogen.
Explanation: The body breaks down most carbohydrates from the foods we eat and converts them to a type of sugar called glucose. Glucose is the main source of fuel for our cells. When the body doesn't need to use glucose for energy, it stores it in the liver and muscles. This stored form of glucose is made up of many connected glucose molecules and is called glycogen. When the body needs a quick boost of energy or when the body isn't getting glucose from food, glycogen is broken down to release glucose into the bloodstream to be used as fuel for the cells.
When the body doesn't need to use glucose for energy, it stores it in the liver and muscles.
a spray paint contain flammable gas
help 30 points i need it now
Answer: ignitable gases, such as propane and butane.
Explanation:
That propellant may have hazardous characteristics such as being flammable (spray paint and lubricating sprays) and/or toxic (e.g. chlorinated solvent sprays or cleaning products). Most propellants in spray cans are mixtures of ignitable gases, such as propane and butane.
What is happening to the light when you see a green object?
A: The green light is absorbed
B: The green light is reflected .
C: The green light goes through the object.
Answer:
A. The green light is absorbed
How do you think the atoms in metal elements are different from those in nonmetals or metalloids?
Explanation:
Metaloids and nonmetals are more likely to have the properties of liquids and gases.Though they can be elements and compounds like metals, it is less likely for you to see metaloids and nonmetals in a solid state like metals.
Hope this helps !
compound words are usually composed in the following order: combining form + word root + suffix.
Please help Chemistry
What is the percent yield of Fe2S3
if 284 g Fe2S3 are collected, rather
than the 863 g Fe2S3 expected
through calculation?
2FeBr3 +3Na₂S → Fe2S3 + 6NaBr
[ ? ]%
The percent yield of [tex]Fe_2S_3[/tex], according to the given parameters, would be 32.91%.
Percent yieldThe percent yield of a particular product from a reaction is the actual amount of that product formed relative to the stoichiometric or theoretical amount that is supposed to be formed.
The percent yield of a reaction can be mathematically expressed as:
Percent yield = actual yield/theoretical yield x 100%
In this case:
Actual yield = 284 g
Theoretical yield = 863 g
Percent yield = 284/863 x 100
= 32.91%
In other words, the percent yield of [tex]Fe_2S_3[/tex] according to the given parameters would be 32.91%.
More on percent yield can be found here: https://brainly.com/question/2506978
#SPJ1
Answer:
first answer is correct in accellus
Explanation:
Calculate the molar concentration of 8 g of odium ulfate, Na2SO4(), diolved in 210 mL of olution
The molar concentration of of 8 gram of sodium sulfate(Na₂SO₄) dissolved in 210 ml of solution is 0.267.
Molar concentration is defined as the number of moles of a substance in 1 liter of solution. If molar concentration is denoted by M, number of mole denoted by "n" and volume of solution is denoted by V, then
M = n/V
Atomic weight of sodium sulfate(Na₂SO₄) = (23×2+32+16×4) = 142
142 gram is the weight of 1 mole of sodium sulfate(Na₂SO₄).
1 gram is the weight of 1/142 moles of Na₂SO₄
8 grams is the weight of (1×8)/142 = 0.056 moles
Volume of solution = 210 ml = 0.210 liter
So, the molar concentration, M = 0.056/0.210
M = 0.267
To know more molar concentration, here
https://brainly.com/question/15532279
#SPJ4
Instant hot and cold packs are found in many common stores and work when two substances react. Depending on the substances that react, the reaction either absorbs heat or gives off heat. The enthalpy of a hot pack is because the reaction.
Instant hot and cold packs are found in many common stores and work when two substances react. Depending on the substances that react, the reaction either absorbs heat or gives off heat. The enthalpy of a hot pack is negative because the reaction gives off heat. If The enthalpy of a hot pack is positive because the reaction absorbs heat.
Define enthalpy?A thermodynamic system's internal energy and the product of its pressure and volume are added to form enthalpy, which is one of the system's properties. It is a state function that is frequently used to monitor chemical, biological, and physical systems at a constant pressure that is conveniently given by the sizable surrounding environment.In a thermodynamic system with constant pressure, the total amount of heat is measured in terms of enthalpy. It is shown to be. H is equal to E + P + V, where E denotes internal energy, P denotes pressure, and E denotes energy. In a thermodynamic system, entropy represents the degree of chaos.The measurement of energy in a thermodynamic system is called enthalpy.To learn more about enthalpy refer to:
https://brainly.com/question/1533869
#SPJ4
How to work out rate of reaction
Equipment not kept in your assigned lab drawer is called:
Shared equipment
Departmental equipment
Lab equipment
Community equipment
Equipment not kept in your assigned lab drawer is called: Shared equipment
Departmental equipment are the set of things that is to be used by all the people of department and not necessarily have to be a research equipment. This kind of equipment mostly include some simple machineries and all purpose equipment that can also be used out of the laboratory.
Lab equipment are strictly research related things but can be used for various projects and not strictly used for a particular project. This kind of equipment can be used by research scholars as well as undergraduate or postgraduate student group.
Community equipment are also research related thing but unlike Lab equipment it is used by a group of students or research scholars who are involved in same project or similar kind of project and can't be shared commonly among all the students.
A shared equipment is research related thing but unlike Community equipment it is not shared among the scholars of similar kind of different projects. Shared equipment is assigned for a single group for a particular project and can be shared among the group members only. No members of the group can acquire it all alone.
To know more about Laboratory equipment here:
https://brainly.com/question/18315601#
#SPJ4
A value of 25 °C is a measurement of
O distance.
O density.
O mass.
O volume.
O temperature
10. A chemist wants to make calcium phosphate using the following reaction:
2K3PO4 (aq) + 3CaCl₂ (aq) → Cas(PO4)2 (s) + 6KCl (aq)
culu
If he has extra calcium chloride and 750.0 mL of a 1.8 M solution of potassium
phosphate, how many grams of calcium phosphate can he produce?
Answer:
So the chemist can produce 418.7 grams of calcium phosphate.
Explanation:
We can start the problem by using the balanced chemical equation for the reaction and the stoichiometry to determine the amount of calcium phosphate that can be produced.
2K3PO4 (aq) + 3CaCl2 (aq) → Ca3(PO4)2 (s) + 6KCl (aq)
From the balanced equation, we can see that for every 2 moles of potassium phosphate (K3PO4) reacted, 1 mole of calcium phosphate (Ca3(PO4)2) is produced.
We are given that the chemist has 750.0 mL of a 1.8 M solution of potassium phosphate. We can convert this information into moles by using the formula:
moles = concentration x volume
moles = 1.8 M x (750.0 mL) / 1000 mL/L = 1.35 moles
To find the number of grams of calcium phosphate that can be produced we can use the molar mass of calcium phosphate which is 310.18 g/mol
grams = moles x molar mass
grams = 1.35 x 310.18 = 418.7 grams
So the chemist can produce 418.7 grams of calcium phosphate.
How would you measure 20 grams of salt?
20 grams of salt can be accurately weighed using an electronic balance. For measuring, we can use s filter paper or other thin sheets to take the salt.
What is an electronic balance ?An electronic balance is a used to weigh substances. Solid as well as liquids substances can be accurately weighed using an electronic balance. It is more accurate and easy to use in comparison with with the conventional balances.
Powder samples can be easily weighed out using electronic balances. First we have to tier the weight of the container or the paper on which the substance to be weighed is taken.
20 g of salt can be easily measured out using an electronic balance. Using this device we can take measurements with two or four decimal places as well.
Find more on electronic balance:
https://brainly.com/question/24525668
#SPJ1
How could you find the number of particles in 4 moles of a substance ?
Answer:
below
Explanation:
Calculating the number of particles
1. The number of particles in a substance can be calculated using:
2. Number of particles = Avogadro constant × the amount of substance in mol.
3. Calculate the number of water molecules in 0.5 mol of water.
4. Number of water molecules = Avogadro constant x amount of substance in mol.
Predict the products of the following reactants: Cu + AlCl3 -->
A. 3Cu + 2AlCl3 --> 3CuCl2 + 2Al
B. Cu + AlCl3 --> CO2 + H2O
C. Cu + AlCl3 --> AlCuCl3
D. No reaction will occur
The products of the reactants: 3 Cu +2 AlCl₃ → 3CuCl₂ + 2Al.
What is the chemical equation?A chemical equation involves reactants, formed products, and an arrow indicating the direction of the reaction.
The chemical equation in which the number of atoms of every involved element is equal on both sides of the equation is known as a balanced chemical equation.
The law of conservation of mass needed to be followed by a chemical equation. The total mass of the elements on the reactant side will be equal to the total mass of elements on the product side in any balanced chemical equation.
Learn more about the chemical equation, here:
brainly.com/question/28294176
#SPJ1
Draw a Lewis structure for the urea molecule, CO(NH2)2CO(NH2)2.
Draw the Lewis dot structure for urea. Include all lone pairs of electrons.
A Lewis Structure is a significantly condensed illustration of the valence shell electrons of a molecule. It serves to illustrate how the electrons surround the character atoms of a molecule.
Water: Is It a Molecule?Atoms come together to form molecules. The two atoms a water molecule are either two hydrolysis (H) atom but one oxid (O) atom. As a result, water is sometimes shortened as H2O. One teaspoon of liquid contains billions of water molecules.
What sets a compound apart from a molecule?A molecule is a group of three or maybe more atoms connected by chemical bonds. A composite is a mixture created by the chemical fusion of a number of distinct types of components.
To know more about molecule visit:
https://brainly.com/question/29750383
#SPJ4
If a jug hold 5 gallon of water. If a gla hold 4 oz of water, how many glae can be drawn from the water jug
The water in the 5-gallon jug will fill 160 glasses.
According to the issue, a glass carries 4 ounces of water while a jug holds 5 gallons. We must convert the jug's volume from gallons to ounces and divide it by the volume of glass in order to determine how many glasses can be filled from it.
The water in the jug needs to be converted from gallons to ounces first. A gallon contains 128 ounces, hence 5 gallons of water equal 5×128 = 640 ounces.
The amount of water in the glass is then divided by the amount of water in the jug. If a glass holds four ounces, then 160 glasses can be filled from the jug, or 640 divided by four.
It's vital to note that we are converting between units in this problem using the rule that 1 gallon = 128 ounces. This conversion factor is based on the units of a gallon and an ounce, which are both common measurements.
We can simply convert gallons to ounces using this conversion factor, which enables us to perform the calculations required to get the solution.
In conclusion, by dividing the volume of the 5-gallon jug of water by the volume of glass, 160 glasses can be filled from it. To accomplish this, we must use a conversion factor to convert water measured in gallons to ounces.
Learn more about gallon at
https://brainly.com/question/19638640
#SPJ4
Arrange the oxoacids of bromine according to strength.
Strongest acid
Weakest acid
Answer :
a. HBrO2
b. HBrO
c. HBrO3
d. HBrO4
Oxoacids get more acidic as the number of oxidations on the halogen rises.
Perchloric acid is the most potent acid there is. As NH 4Br is an acidic salt, the solution will be acidic even though the Br ions come from a strong acid (HBr), but the NH 4 + ions come from a weak base (NH 3). Br2 is therefore regarded as a mild Lewis acid. Large acceptor atoms in soft acids have a low positive charge, are highly polarisable, and have poor electronegativity. One of the finest nucleophiles, the bromide ion is a poor base. It chooses to take on a nucleophilic role.
To find more on acidic refer here:
https://brainly.com/question/24255408
#SPJ4
The image above shows divergent plate boundaries.
A. True
B. False
What is the mass of 3.20 x 1023 formula finite iron(III) oxide
draw the electron configuration for a neutral atom of iron.
The electron configuration for a neutral atom of iron (Fe) is [Ar] 3d^6 4s^2
The electron configuration is a way of describing the arrangement of electrons in an atom. It is written by listing the various electron shells and the number of electrons in each shell. In the case of iron, it has 26 electrons, which are arranged in the following way:
1s^2 2s^2 2p^6 3s^2 3p^6 4s^2 3d^6
The first two electrons go in the 1s orbital. The next two electrons go in the 2s orbital, and then six electrons go in the 2p orbitals. The next two electrons go in the 3s orbital, six electrons go in the 3p orbitals, and the last two electrons go in the 4s orbital. The last 6 electrons go in the 3d orbitals. The electron configuration shows that the last six electrons in the 3d orbitals are the valence electrons which are responsible for chemical reactions.
The element Iron (Fe) belongs to the group 8 of the periodic table, the elements of this group are known as transition elements, which have an incomplete d-subshell.
To know more about Iron (Fe) click below:
https://brainly.com/question/18500540#
#SPJ4
Among the different types of scientific knowledge,
are likely to be modified or discarded most frequently. Long ago, in the 1600s, scientists discarded the phlogiston theory because
Many people in the early days of science thought that combustible stuff was made of a component called phlogiston that this substance was emitted during the burning of combustible things.
A combustible material is what?
Combustible materials are those that, when exposed to fire or heat, will ignite, burn, sustain combustion, or produce flammable gases in the form and circumstances anticipated for their application. Combustible materials include rubber, plastics, rubberized materials, and wood.
What gases are combustible?
A gas that really can ignite inside the air or with oxygen is said to be combustible. Gases like hydrogen, methane, propane, and iso-butane are examples of flammable gases. In the existence of an ignition source, a mixture containing a particular amount of flammable oxygen and gas will explode. The most common reason for gas explosion accidents is combustible gas.
To know more about combustible visit:
https://brainly.com/question/13153771
#SPJ1