Helppppp plz ASAP DON’T GUESS

So, the molar mass of tetraethyl lead is

[tex]207.2+8(12.011)+20(1.00794)=\boxed{323.4468 \text{ g/mol}}[/tex]

Answer: 287.46 billion km

Explanation: calculated it myself. nah but thats the answer

Answer:c6h14

Explanation:

Answer:

Generally SN1 reactions are carried out in polar protic solvents. The energy required for breaking the C-X bond is obtained through solvation of halide ion with the proton of the solvent. Tertiary alkyl halides undergo SN1 reaction very fast because of the high stability of tertiary carbocations.

Answer:

333g/L

Explanation:

The moles of CaCl2 in 6mEq are:

6mEq * (1mmol / 2mEq) = 3mmol CaCl2.

2Eq / mol because the charge of Ca is 2+

The mass is:

3mmol CaCl2 * (111mg/mmol) = 333mg = 0.333g

Molar mass: 2*35.5g/mol + 40g/mol = 111g/mol = 111mg/mmol

The liters are:

1mL * (1L / 1000mL) = 1x10⁻³L

The concentration in grams per liter is:

0.333g / 1x10⁻³L = 333g/L

Answer:

a decrease in concentration affects the equilibrium

Explanation:

disturbance: equilibrium was disturbed by a decrease in concentration

response:system acts so as to increase concentration

reaction favoured: forward reaction

concentration: concentration of ...... ND ....... increases ND that of ......(product)decreases

Answer:

Thompson's experiments with cathode ray tube showed that every atom contains a small amount of negatively charged subatomic particles. Thomson proposed the plum pudding model of the atom.

Explanation:

Answer:

bronze, copper

Explanation:

bronze is used to make medals and carve statues

copper is used to make wire and utensils

Answer:

Well, if you check the reactivity series, calcium is more reactive than magnesium. This means there's a a trend of increasing reactivity as we go down the group. As beryllium is above magnesium, it must be the least reactive. Then magnesium is in the middle and the most reactive has to be calcium.

Answer:

Aluminium because highl elecronegativety element and more metalic hign melting and boling point from the other

Answer:

A FUSE is a type of conductor which protects the circuit by shorting it down when there is excess flow of current passing through it.

Explanation:

A fuse wire is made up of conducting materials such as alloy of tin and lead that has high resistivity. It has a low melting point of 200°C. It works based on the principle of heating effect of electric current. The functions of fuses include the following:

--> Fuses are made up of thin wire CONDUCTORS which interrupts or breaks the current flow of a circuit when in excess, thereby protecting the circuit from damage.

--> it prevents overload of current. In the event where too many appliances are connected to a single circuit, this can lead to overload which triggers a fuse to terminate the circuit connection.

--> It prevents total black-out: SWITCH-LIKE devices known as CIRCUIT BREAKERS share this function with the fuses. The nearest circuit breaks if any dysfunction occurs in the components of the circuit thereby preventing blackout.

Answer:

Bones aren't made of calcium metal. Bones are a collegun structure filled in with mostly calcium carbonate and some calcium phosphate

Answer:

Bones aren't made of calcium metal. Bones are a collegun structure filled in with mostly calcium carbonate and some calcium phosphate

Explanation:

I hope this helps

Answer:

Barium Hydroxide

Explanation:

..........................

Answer:

44.8 L

Explanation:

Using the ideal gas law equation:

PV = nRT

Where;

P = pressure (atm)

V = volume (L)

n = number of moles (mol)

R = gas law constant (0.0821 Latm/molK)

T = temperature (K)

At Standard temperature and pressure (STP);

P = 1 atm

T = 273K

Hence, when n = 2moles, the volume of the gas is:

Using PV = nRT

1 × V = 2 × 0.0821 × 273

V = 44.83

V = 44.8 L

Answer:

44.8L

Explanation:

Answer:

B

Explanation:

A chemical reaction equation is balanced if the number of atoms of each element on the right hand side of the reaction equation is the same as the number of atoms of the same element on the left hand side of the reaction equation.

By inspection, the chemical reaction written in the question is a balanced chemical reaction equation.

However, the statement in option B that more molecules of N2 are needed to produce NH3 than molecules of H2 is a false statement since only one mole of N2 and three moles of H2 are required to produce NH3 according to the reaction equation as written in the question.

Answer:

As you turn the tube you can see patterns of colors at the other end of the tube. A kaleidoscope works by reflecting light. Light travels in a straight line. When light bumps into something it changes direction.

Kaleidoscopes are made with two or more mirrors. Light reflecting between these mirrors produces multiple virtual images of stunning beauty. ... Light rays are assumed to bounce off the mirrors like a ball bounces off a hard surface. Formally stated, the angle of incidence equals the angle of reflection.

Explanation:

Answer:

boron sulfide

b=boron

s=sulfer

Explanation:

Answer:

The Magician who lives in sand is called sand witch.

And sandwich is The name of one kind of food.

Answer:

Sandwich its food you eat it

Explanation:

Answer:

The correct answer is - Statement I is true, Statement-II is false.

Explanation:

The equation Fe + CuSO₄ → Cu + FeSO₄ illustrates the single displacement reaction. Hence Option (D) is the correct answer.

A single replacement reaction, sometimes called a single displacement reaction, is a reaction in which one element is substituted for another element in a compound.

The starting materials are always pure elements, such as a pure zinc metal, iron or hydrogen gas, plus an aqueous compound.

Therefore, the equation Fe + CuSO₄ → Cu + FeSO₄ illustrates the single displacement reaction. Hence Option (D) is the correct answer.

Learn more about reaction here ;

https://brainly.com/question/17434463

#SPJ2

Answer: The theoretical yield of alum is 12.09 g

Explanation:

Molarity is calculated by using the equation:

[tex]\text{Molarity}=\frac{\text{Moles}}{\text{Volume}}[/tex] ......(1)

We are given:  

Molarity of sulfuric acid = 9.9 M

Volume of solution = 8.3 mL = 0.0083 L (Conversion factor: 1 L = 1000 mL)

Putting values in equation 1, we get:

[tex]\text{Moles of sulfuric acid}=(9.9mol/L\times 0.0083L)=0.08217mol[/tex]

The given chemical equation follows:

[tex]2Al+2KOH+4H_2SO_4+22H_2O\rightarrow 3H_2+2KAl(SO_4)_2.12H_2O[/tex]

By the stoichiometry of the reaction:

4 moles of sulfuric acid produces 2 moles of alum

So, 0.08217 moles of sulfuric acid will produce = [tex]\frac{2}{4}\times 0.08217=0.0411mol[/tex] of alum

The number of moles is defined as the ratio of the mass of a substance to its molar mass. The equation used is:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(2)

Molar mass of alum = 294.24 g/mol

Plugging values in equation 2:

[tex]\text{Mass of alum}=(0.0411mol\times 294.24g/mol)=12.09g[/tex]

Hence, the theoretical yield of alum is 12.09 g

Answer:

parietal pleura

Explanation:

The pleurae, which are serous membranes, divide the thoracic cavity's wall from the lungs. The parietal pleura covers the interior of the thorax, mediastinum, and diaphragm, while the visceral pleura covers the surface of the lungs.

The perianal pleura, the outer layer, is attached to the chest wall. The lungs, mediastinum's neurovascular structures, and bronchi are all covered by the inner layer (visceral pleura).

The pleura's role in breathing is to enable the lungs to expand and collapse as efficiently as possible.

The parietal and visceral pleura can move over one another without rubbing against one another thanks to the pleural fluid's lubricating properties. The pleural layers themselves produce this fluid.

Therefore, parietal pleura, which surround the lungs in thoracic cavity.

Learn more about parietal pleura here:

https://brainly.com/question/15247615

#SPJ2

Answer: protein bar,it gives alot of energy and wont upset your stomach!!

Answer:

Hey there

Explanation:

The process where organisms better adapted to their environment tend to survive and produce more offspring is called natural selection. It is one of the points of Darwinism by Charles Darwin.

Hope it helps

Answer:

Explanation:

(a) Firstly, caesium abd potassium are both in Group 1 of the periodic table. Group 1 metals (also called alkali metals) are the most reactive metals of the periodic table. Caesium is more reactive than Potassium because it has a higher electropositivity than Potassium. Electropositivity is the tendency of a metal to donate electron(s) to form a cation. Electropositivity increases down the group; this is because it is easier for atoms to loose electrons on the outermost shell that are far away from the central nucleus as against atoms whose outermost electrons are closer to the central nucleus. Thus, the more "bulky" an atom is, the farther it's outermost electrons (valence electrons) get from the central nucleus and the easier it is to lose the outermost electron(s). And the easier it is for the valence electron(s) to be removed, the more reactive the atom would be and vice-versa.

Caesium is more reactive than potassium because it is more bulky than potassium, with an atomic number of 55, while potassium has an atomic number of 19.  

NOTE: The closer an electron is to the nucleus, the more difficult it is to be removed from it's shell.

(b) i. Formula for Caesium Nitrate:

Symbol for Caesium is Cs and Nitrate is NO₃⁻.

Cs⁺ + NO₃⁻  ↔  CsNO₃

Formula for Caesium Nitrate is  CsNO₃

ii. Formula for Caesium sulphate

Symbol for caesium is Cs and Sulphate is SO₄²⁻

Cs⁺ + SO₄²⁻  ↔   Cs₂SO₄  

Formula for Caesium sulphate is Cs₂SO₄

NOTE: When writing the formulae, the charges would be exchanged to form the subscript as seen on the product sides above.

Answer:

Oxygen is the nearest noble gas

Answer:

The correct answer is - may not be typical, and participant burden.

Explanation:

The 24-hour recall is nothing but a retrospective method of diet assessment. In this method, an individual is interviewed about his or her diet consumption during the last 24 hours.

The disadvantages or limitations of this method include the inability of a single day's intake to describe the typical diet, multiple recalls to intake, cost and administration time; participant burden, have to recall to reliably estimate usual intake.

Answer:

b

Explanation:

The chemical formula for a compound between Rb and the nitrate ion NO₃-1 is Rb(NO₃)₂. Hence, option B is correct.

Chemical formulas can be written for elements, compounds, and molecules. A compound is a substance made up of two or more different elements in a fixed ratio, and its formula shows the types of atoms and the number of each atom in the compound.

Rb(NO₃)₂ is the chemical formula for rubidium nitrate. It is an ionic compound composed of one rubidium cation (Rb+) and two nitrate anions (NO₃-) held together by ionic bonds.

The Rb+ ion has a charge of +1 and the NO₃- ion has a charge of -1, so two nitrate ions are needed to balance the charge of one rubidium ion. The overall charge of the compound is neutral.

Thus, option B is correct.

To learn more about the chemical formula, follow the link:

https://brainly.com/question/31713710

#SPJ2