Answer:
True,
Explanation:
Over the entire surface, the variation in gravitational acceleration is about 0.0253 m/s2 (1.6% of the acceleration due to gravity). Because weight is directly dependent upon gravitational acceleration, things on the Moon will weigh only 16.6% (= 1/6) of what they weigh on the Earth.
Recall the portion of the video in which the girl pushes her brother on the sled at constant velocity. The pushing force she exerts on the sled is _____ the frictional force the ground exerts on the sled. Recall the portion of the video in which the girl pushes her brother on the sled at constant velocity. The pushing force she exerts on the sled is _____ the frictional force the ground exerts on the sled.
a)less than
b)equal to
c)greater than
The pushing force the girl exerts on the sled is equal to the frictional force the ground exerts on the sled. The answer is (b).
This is an example of balanced forces, in which the forces acting on the sled are equal in magnitude and opposite in direction. The pushing force from the girl is balanced by the frictional force from the ground, which is necessary to maintain the constant velocity of the sled.
According to Newton's first law of motion, an object at rest or moving at a constant velocity will remain in that state unless acted upon by an unbalanced force. Since the sled is not accelerating, we know that the forces acting on it must be balanced. Therefore, the pushing force and the frictional force must be equal in magnitude and opposite in direction.
To know more about the Newton's first law of motion, here
brainly.com/question/26108169
#SPJ4
the 20-ampere branch circuit required for bathroom receptacles is permitted to serve equipment other than receptacles only under which of the following conditions? Select one:a. when the circuit is protected by a GFCI circuit-breakerb. when the circuit supplies a single bathroomc. when the receptacle is built into the lighting fixtured. either a or b IncorrectFeedback
"The 20-ampere branch circuit required for bathroom receptacles is permitted to serve equipment other than receptacles only when the circuit supplies a single bathroom." Correct option is B.
The circuit should supply other equipment only in that bathroom.
According to the NEC, every outlet receptacle in a restroom must be GFCI protected. Bathroom outlets must be served by a 20-amp circuit that is distinct from the lighting circuit in order to supply power to appliances like curling irons, razors, and hair dryers.
Bathrooms in residential units require a single 20-amp branch circuit.
To ensure a consistent energy supply, large consumers, particularly kitchen appliances like toasters, blenders, and microwaves, require a dedicated 20 amp circuit; hence, other devices cannot share this circuit.
To know more about circuits:
https://brainly.com/question/29988666
#SPJ4
a plane has an eastward heading at a speed of 156 m/s (relative to the air). a 20.0 m/s wind is blowing southward while the plane is flying. the velocity of the plane relative to the ground is
Answer:
Below
Explanation:
The 156 and 20 m/s speeds form the LEGS of a right triangle....you want to find the resultant hypotenuse....so use pythagorean theorem
Resultant ^2 = 156 ^2 + 20^2
resultant ^2 = 24736
Resultant = 157.3 m/s magnitude
A truck with a mass of 2725kg is being towed by a rope held at a 23 degree angle from the horizontal. A friction force of 375 N opposes the car’s motion if the truck accelerates from 2.2m/s to 10.2m/s in 11 s. What is the tension in the tow rope??
Answer:2725
Explanation:
a perfectly fitting pot and its lid often stick after cooking, and it becomes very difficult to open the lid when the pot cools down. an easy way of removing the lid is to the food.
Answer:
heat
Explanation:
Heat will cause expansion of food and air and water ( steam) inside of the pot causing the lid to pop off
what must be a particle's charge-to-mass ratio if the magnitude of the gravitational force between two of these particles is equal to the magnitude of electric force between them
The ratio of the charge on each particle to its mass must be equal when the magnitude of the gravitational force between two of these particles is equal to the magnitude of the electric force between them.
What does magnitude mean?The term “magnitude” refers to the size or quantity of a physical quantity, without taking into account its direction. It is a scalar quantity, meaning it has only a numerical value and no associated direction.
For example, the magnitude of a vector quantity like velocity, which has both a magnitude and direction, refers only to its numerical value, without regard to its direction.
Similarly, the magnitude of a force, electric field, magnetic field, or any other vector quantity refers to the strength or intensity of that quantity, regardless of its direction.
When the gravitational and electric forces between two particles are equal in strength, the following equation describes these forces:
Gravitational force:
[tex]F_g = G\times \frac{(m1 m2)}{(r_2)}[/tex]
Electric force:
[tex]F_e = K\times \frac{(q1 q2)}{(r_2)}[/tex]
Where G is the gravitational constant, k is the Coulomb constant, m1 and m2 are the masses of the particles, q1 and q2 are their charges, and r is the distance between them.
Since, the charge-to-mass ratio for the particles is needed, let's rearrange the equations as follows:
(1) [tex]q_1\times q_2 = F_e\times \frac{r_2}{k}[/tex]
(2) [tex]m_1\times m_2 = F_g\times \frac{r_2}{k}[/tex]
Divide the first equation by the second equation
[tex](q1 \times q2) / (m1 \times m2) = (Fe / Fg) \times (G / k)[/tex]
This expression has to be equal to 1, so can set
[tex](Fe / Fg) \times (G / k) = 1[/tex]
Substituting the expressions for Fg and Fe,
Rearrange the equation
Therefore, This means that the charge-to-mass ratio for the two particles must be the same. In other words, the ratio of the charge on each particle to its mass must be equal.
Learn more about magnitude here:
https://brainly.com/question/14452091
#SPJ4
A 33 newton force forms a 60 degree angle with the displacement of 3.00 m to move a box. How much work is done to the box by the force?
Answer:
Explanation:
Work done = force * displacement = 33Cos60 * 3 = 49.5J
determine the displacement of the log if the truck at c pulls the cable 10 ft to the right. (figure 1)
The displacement of the log if the truck at c pulls the cable 10 ft to the right will be 3.33ft in the opposite direction.
2Sb+(Sb-Sc)=l
3Sb-Sc=l
3deltaSb-deltaSc=0
3deltaSb=deltaSc
3deltaSb=-10
Sb=-3.3333
negative sign here indicates the opposite direction of the displacement.
Displacement is known as the change in position of an object. It is a vector quantity which means it has both direction and magnitude. The representation of displacement is by an arrow that points from the starting position to the final position. For example- If an object moves from A position to B, then the object's position changes.
Learn more about displacement here:-
brainly.com/question/11934397
#SPJ4
The figure is a cross-section of two infinite lines of charge that extend out of the page. Do both have a linear charge density?
Find an expression for the electric field strength E at height y above the midpoint between the lines. Express your answer in terms of the variables?
y, d, and appropriate constants.
At any point on a line charge distribution, the linear charge density is the amount of charge per unit length, expressed in coulombs per meter (Cm1). Electric charge can be positive or negative, hence charge density can also be positive or negative.
What is a linear charge density?Linear charge density is a measure of the amount of electric charge per unit length along a line or wire. It is denoted by the symbol λ (lambda) and has units of coulombs per meter (C/m).
To calculate the linear charge density, you divide the total charge by the length of the line or wire. For example, if a wire has a total charge of 5 coulombs and a length of 2 meters, then the linear charge density would be:
λ = 5 C / 2 m = 2.5 C/m
P.S: Your information is incomplete and an overview was given.
Learn more about density on:
https://brainly.com/question/14568868
#SPJ1
Match the words in the left-hand column to the appropriate blank in the sentences in the right-hand column. use each word only once.- corona- convection zone- core- photosphere- radiation zone- chromosphere1. nuclear fusion of hydrogen into helium occurs in the ______2. energy moves through the sun's ______ by means of the rising of hot gas and falling of cooler gas. 3. nearly all the visible light we see from the sun is emitted from the ______4. most of the sun's ultraviolet light is emitted from the narrow layer called the ______ where temperature increases with altitude. 5. we can see the sun's ______ most easily during total solar eclipses.6. the ______ is the layer of the sun between its core and convection zone.
Nuclear fusion is the process that occurs when two or more atomic nuclei unite. In below given way words can be matched.
What is nuclear fusion?Nuclear fusion is the process that occurs when two or more atomic nuclei unite to generate one or more distinct atomic nuclei containing subatomic particles (neutrons or protons). The mass difference between both the products and the reactants manifests itself as either energy release or absorption.
1. Nuclear fusion of hydrogen into helium occurs in the CORE.
2. Energy moves through the sun's CONVECTION ZONE by means of the rising of hot gas and falling of cooler gas.
3. Nearly all the visible light we see from the sun is emitted from the PHOTOSPHERE.
4. Most of the sun's ultraviolet light is emitted from the narrow layer called the CHROMOSPHERE where temperature increases with altitude.
5. We can see the sun's CORONA most easily during total solar eclipses.
6. The RADIATION ZONE is the layer of the sun between its core and convection zone.
Therefore, in above given way words can be matched.
To learn more about nuclear fusion, here:
https://brainly.com/question/12701636
#SPJ1
What are data ?
A - Sources that summarize a primary source
B - Educated guesses about the outcome of an experiment
C - Pieces of information recorded in an experiment
D - Variables that are adjusted by the experimenter
C - Pieces of information recorded in an experiment.
What is sample space?The sample space S of a random experiment is defined as the set of all possible outcomes of an experiment. In a random experiment, the outcomes, also known as sample points, are mutually exclusive.
Data refers to any pieces of information that are collected or recorded during an experiment or study.
This information can be qualitative or quantitative and may include measurements, observations, survey responses, or any other type of information that can be analyzed to answer research questions or test hypotheses.
Data can be analyzed and interpreted to draw conclusions or make predictions about the phenomenon being studied.
Learn more about sample space here:
brainly.com/question/30206035
#SPJ9
paleomagnetism shows at equal distances from the mor, the polarity of the earth's magnetism in the rock is the same. T/F
False, Paleomagnetism, is the study of glamorous fields recorded in jewels, deposition, or archeological accoutrements . Geophysicists who specialize in paleomagnetism are called paleomagnetists.
Certain glamorous minerals in jewels can record the direction and intensity of Earth's glamorous field at the time they formed. This record provides information on the once geste of the geomagnetic field and the once position of monumental plates. The record of geomagnetic reversals saved in stormy and sedimentary gemstone sequences provides a time- scale that's used as a geochronologic tool.
substantiation from paleomagnetism led to the reanimation of the international drift thesis and its metamorphosis into the ultramodern proposition of plate tectonics. Apparent polar wander paths handed the first clear geophysical substantiation for international drift, while marine glamorous anomalies did the same for seafloor spreading. Paleomagnetic data continues to extend the history of plate tectonics back in time, constraining the ancient position and movement of mainland and international fractions( topographies).
Learn more about Paleomagnetism from brainly, visit: brainly.com/question/3649885
#SPJ4
consider an l shaped object where the vertical leg extends from the origin to 0 5 and the horizontal segment extends from the origin to 3 0 assuming the object has a uniform linear mass desnity trhoughout where is the location of the center of mass?
A. (1.5,1.5)
B. (1.5,2.5)
C. (2.5,2.5)
D. The center of mass for an "L" is undefined because there is no single point on the object where it can be supported, such that it will not rotate
E. None of these
The location of the center of mass an l shaped object where the vertical leg extends from the origin to 0 5 and the horizontal segment extends from the origin to 3 0 assuming the object has a uniform linear mass density throughout is undefined.
The correct answer is D. The center of mass for an "L" is undefined because there is no single point on the object where it can be supported, such that it will not rotate. To calculate the center of mass of such an object, you would need to break it up into two separate objects and calculate the center of mass for each.
The center of mass, or centroid, of an object is the point at which the mass of the object is evenly distributed. The center of mass is a point where the object can be supported without tipping over or rotating. The position of the center of mass is determined by the distribution of mass within the object, and it is often used to describe the motion of an object, or to calculate its moment of inertia. The center of mass of an object is often used in physics to calculate the total force and torque acting on the object, and the motion of the object in response to those forces.
To know more about center of mass please refer:
https://brainly.com/question/30259066
#SPJ4
The complete question is:
consider an L shaped object where the vertical leg extends from the origin to 0 5 and the horizontal segment extends from the origin to 3 0 assuming the object has a uniform linear mass density throughout where is the location of the center of mass?
A. (1.5,1.5)
B. (1.5,2.5)
C. (2.5,2.5)
D. The center of mass for an "L" is undefined because there is no single point on the object where it can be supported, such that it will not rotate
E. None of these
Which of the following is not an advantage that a reflector telescope has over a refractor telescope? a reflector doesn't have to do deal with the twinkling of the stars, as a refractor does.
A reflector doesn't have to do deal with the twinkling of the stars, as a refractor does, is not an advantage that a reflector telescope has over a refractor telescope.
Types of TelescopesTelescopes turned out to be divided into several types. here are some types of telescopes that you need to know:
1. Refractor Telescope
A refractor telescope is a refracting telescope consisting of several glass lenses as a tool used to capture light and carry out the powers of the tool. In a refractive telescope, it consists of two convex lenses as the objective and eyepiece lenses. Advertisement The light that enters the binoculars will be refracted by the lens. Therefore, this telescope is called a refracting telescope.
2. Reflector Telescope
Another type of telescope is the reflector telescope. This telescope is a type of telescope that uses a mirror to replace the lens used to capture light and reflect it. This telescope is used to observe deepsky objects such as nebulae, galaxies, opencusters, and comets.
3. Catadioptric Telescope
This type of telescope has a working system that is not far from the two previous types of telescopes. This is because a catadioptric telescope is a combination of a refractor and reflector telescope that uses two media to collect light.
Learn more about telescope at
https://brainly.com/question/556195
#SPJ4
Noble gases have stable electron arrangements and therefore seldom form compounds. The stable electron arrangements include a _________ outer energy level and _________ potential energy than other arrangements.
The words that fill in the blanks are;
Completely filled
High
What are noble gases?Noble gases are a group of chemical elements in the periodic table that are typically inert or unreactive due to their stable electronic configurations. They include helium (He), neon (Ne), argon (Ar), krypton (Kr), xenon (Xe), and radon (Rn).
We know that the Noble gases do have a complete outer shell and that they are able to not combine with the other elements in a chemical bond. This is the hallmark of the noble gases as we know in the periodic table.
Learn more about noble gases:https://brainly.com/question/11764545
#SPJ1
When a 2.30-kg object is hung vertically on a certain light spring described by Hooke's law, the spring stretches 2.71 cm.(a) What is the force constant of the spring?N/m(b) If the 2.30-kg object is removed, how far will the spring stretch if a 1.15-kg block is hung on it?cm(c) How much work must an external agent do to stretch the same spring 6.90 cm from its unstretched position?J
Force constant of the spring is 846 N/m, spring will stretch 1.36 cm when the 1.15-kg block is hung on it, work done by external agent is 23.9 J
(a) To find the force constant of the spring, we can use Hooke's law, which states that the force F exerted by a spring is proportional to its displacement x from its equilibrium position, with a constant of proportionality known as the spring constant k. Mathematically, we can write:
F = -kx
where the negative sign indicates that the force is in the opposite direction of the displacement. Rearranging this equation, we get:
k = -F/x
Substituting the given values, we get:
k =[tex]-(mg)/x = -(2.30 kg)(9.81 m/s^2)/(0.0271 m)[/tex] = -846 N/m (Note: the negative sign indicates that the spring is being stretched, so the force is in the upward direction.)
Therefore, the force constant of the spring is 846 N/m.
(b) If the 2.30-kg object is removed and replaced by a 1.15-kg block, the force exerted by the spring will be:
F = kx = [tex](846 N/m)(0.01355 m)[/tex] = 11.5 N
where we have used the fact that the displacement of the spring is proportional to the force exerted on it, and that the force constant is the same for both cases.
Using Hooke's law again, we can find the displacement of the spring with the 1.15-kg block:
x = F/k = [tex](11.5 N)/(846 N/m)[/tex] = 0.0136 m = 1.36 cm
Therefore, the spring will stretch 1.36 cm when the 1.15-kg block is hung on it.
(c) To find the work required to stretch the spring 6.90 cm from its unstretched position, we can use the formula for the elastic potential energy stored in a spring:
PE = [tex](1/2)kx^2[/tex]
where k: spring constant and x: spring displacement from equilibrium
Substitute value:
PE = [tex](1/2)(846 N/m)(0.069 m)^2[/tex] = 23.9 J
Therefore, an external agent must do 23.9 J of work to stretch the spring 6.90 cm from its unstretched position. This work is stored as elastic potential energy in the spring, and can be released to do work on another object when the spring returns to its equilibrium position.
Learn more about force constant here:
https://brainly.com/question/2193163
#SPJ4
As a 6 x 102 kg object is pushed horizontally with a force of 1 x 102 N, it gains 5 x 102 J of kinetic energy. Through what distance did the force act?
The force acted through a distance of 5 meters.
How is force related to the surface area?Force and surface area are related through pressure, defined as the force per unit area. Force is inversely proportional to the surface area over which the force is distributed. If the surface area is increased, the pressure exerted by a given force will decrease; if the surface area is decreased, the pressure will increase.
How do you calculate pressure?Pressure is defined as the force per unit area and is typically measured in units of pascals (Pa) or pounds per square inch (psi). The formula for calculating pressure is Pressure (P) = Force (F) / Area (A).
As we know:
F * d = ΔK
Solving for d, we get:
d = ΔK / F
Substituting the given values, we get:
d = (5 x 10² J) / (1 x 10² N)
d = 5 meters
Therefore, the force acted through a distance of 5 meters.
To learn more about pascal, visit here:
brainly.com/question/12165935
#SPJ1
A bicycle wheel is rotating at 42rpm when the cyclist begins to pedal harder, giving the wheel a constant angular acceleration of 0.46 rad/s2 .
A) What is the wheel's angular velocity, in rpm, 9.0s later?
B) How many revolutions does the wheel make during this time?
A) The wheel's angular velocity 9.0 seconds later is 49 rpm.
B) The wheel makes approximately 18 revolutions during this time.
What is angular velocity?It's critical to first understand the definition of rotation in order to comprehend the idea of angular velocity. Consider a windmill or a spinning top. These things rotate along a fixed axis and are rigid bodies. A fixed axis is an axis that does not move, and a rigid body is one that rotates with everything locked together and without the body's shape changes. The term "angular velocity" refers to the speed at which rigid bodies rotate around a fixed axis. The Greek letter omega (ω) is commonly used to denote angular velocity. Similar to linear velocity in translational motion is the angular velocity in rotating motion.
A) We need to convert the initial angular velocity from rpm to rad/s to use the equations. One revolution is equal to 2π radians, and one minute is equal to 60 seconds. Therefore:
ω0 = 42 rpm × 2π/60 = 4.4 rad/s
Using the equation:
ω = ω0 + αt = 4.4 rad/s + 0.46 rad/s^2 × 9.0 s = 8.14 rad/s
Converting the final angular velocity back to rpm:
ω = 8.14 rad/s × 60/2π = 49 rpm (rounded to two significant figures)
Therefore, the wheel's angular velocity 9.0 seconds later is 49 rpm.
B) Using the kinematic equation:
θ = ω0t + 1/2 αt^2 = (42 rpm × 2π/60) × 9.0 s + 1/2 × 0.46 rad/s^2 × (9.0 s)^2 ≈ 114 radians
One revolution is equal to 2π radians. Therefore, the number of revolutions made during this time is:
Number of revolutions = θ/2π ≈ 114/2π ≈ 18 revolutions (rounded to two significant figures)
Therefore, the wheel makes approximately 18 revolutions during this time.
To know more about angular velocity, check out:
https://brainly.com/question/20432894
#SPJ4
true/false. develop an expression for the pressure variation in a liquid in which the specific weight increases with depth, h, as where k is a constant and is the specific weight at the free surface.
Develop expressions for variations in pressure in fluids ⇒ p = K[tex]\frac{h^2}{2}[/tex] + γ₀h
Since we are given a function of specific weight value, which varies with height, we have to define a differential change in pressure over an infinitesimally small change in height:
dp = γdh
Substitute the function:
dp = (Kh+γ₀) dh
This relationship allows us to integrate pressure changes, over small height changes, and obtain the total pressure change:
p = ∫(Kh+γ₀)dh
p = [tex]\int\limits^h_0[/tex]Khdh + [tex]\int\limits^h_0[/tex]γ₀dh
p = Kh²/2[tex]]_0^h[/tex] + γ₀h[tex]]_0^h[/tex]
p = K[tex]\frac{h^2}{2}[/tex] + γ₀h
Your question is incomplete but most probably your full question was:
Develop an expression for the pressure variation in a liquid in which the specific weight increases with depth, h, as γ = Kh+γ₀ where K is a constant and yo is the specific weight at the free surface.
Learn more about the total pressure at https://brainly.com/question/14810152
#SPJ4
The number of crests passing a given point in one second is (where T is time period and v is frequency)A. TB. vC. 2TD 2v
The right response is B. v, where v stands for the wave's frequency.
What is the sound frequency?Frequency, also referred to as pitch, is the rate at which a sound pressure wave repeats itself. A bullfrog cry is significantly lower in frequency than a whistle, while a cricket is much lower in frequency than a drumbeat. With decreasing frequency, the oscillations become less prominent.
What is frequency—light or sound?The ability to identify one sound from another and one colour of light depends on frequency. Red light, for instance, differs from blue light because of its lower frequency. Dogs are able to sense sounds, thus they can hear a whistle that you cannot.
To know more about wave's visit:-
https://brainly.com/question/25954805
#SPJ4
In the video, forces acting on the car that are parallel to the direction of motion are analyzed. How a forces related? ANSWER a. he forces are unequal in size, act in opposite directions, and produce a net orce in the direction of motion. b. The forces are equal in size, act in opposite directions, and produce a zero net force
c. Theforces are unequal in size, act in the same direction and produce a net force in the direction of motion. d. The forces are equal in size, act in the same direction, and produce a net force in the direction df motion. e. The forces are equal in size, act in opposite directions, and produce a net force in the direction of motion.
The forces are unequal in size, act in opposite directions, and produce a net force in the direction of motion. Option d is correct answer.
When multiple forces act on an object in same direction, net force can be found by adding up individual forces.
If the forces are equal in size but opposite in direction, they produce a zero net force, resulting in no acceleration. However, if forces are unequal in size and opposite in direction, they produce a net force in the direction of the larger force, resulting in an acceleration. Therefore, the correct answer is (d) the forces are unequal in size, act in opposite directions, and produce a net force in the direction of motion.
To know more about the acceleration, here
brainly.com/question/24793371
#SPJ4
--The complete question is, In the video, forces acting on the car that are parallel to the direction of motion are analyzed. How are these forces related?
a. The forces are equal in size, act in the same direction, and produce a net force in the direction of motion.
b. The forces are equal in size, act in opposite directions, and produce a zero net force.
c. The forces are unequal in size, act in the same direction, and produce a net force in the direction of motion.
d. The forces are unequal in size, act in opposite directions, and produce a net force in the direction of motion.
e. The forces are equal in size, act in opposite directions, and produce a net force in the direction of motion.--
the truck at c is pulling the log at b via the pulley system shown. after the truck has moved 4 ft to the right, how far has the log moved? if at that instant, the truck has a velocity of 2 ft/s to the right, what is the velocity of the log? if at that instant the truck has an acceleration of 0.5 ft/s2 to the right, what is the acceleration of the log
Finally, let's consider the accelerations of the truck and the log. Since the cable connecting them is not slack or stretched, the truck and the log have the same acceleration. Therefore, at the instant when the truck has an acceleration of 0.5 ft/s2 to the right, the log also has an acceleration of 0.5 ft/s2 to the right.
To solve this problem, we need to apply the principles of kinematics and pulley systems. Let's assume that the pulley is ideal (i.e., frictionless and massless) and that the cable connecting the truck and the log does not stretch or slip.
First, let's consider the distances moved by the truck and the log. Since the cable does not stretch, the distance moved by the truck is equal to the distance moved by the log. Therefore, after the truck has moved 4 ft to the right, the log has also moved 4 ft to the right.
Next, let's consider the velocities of the truck and the log. Since the cable connecting them is not slack or stretched, the truck and the log have the same velocity. Therefore, at the instant when the truck has a velocity of 2 ft/s to the right, the log also has a velocity of 2 ft/s to the right.
Therefore, at the instant when the truck has an acceleration of 0.5 ft/s2 to the right, the log also has an acceleration of 0.5 ft/s2 to the right.
Here you can learn more about the accelerations
https://brainly.com/question/13337555
#SPJ4
The illustration below shows two boxes on opposite ends of a massless board that is 3.0 m long. The board is supported in the middle by a fulcrum. The box on the left has a mass (m) of 25 kg, and the box on the right has a mass (m2) of 15 kg. How far should the ful- crum be positioned from the left side of the board in order to balance the masses horizontally? A. 0.38 m C. 1.1 m B. 0.60 m (D. 1.9 m) 6 m2
The fulcrum should be positioned 1.125 m from the left side of the board to balance the masses horizontally. The closest answer choice is (C) 1.1 m.
To balance the masses horizontally, the torque on the left of the fulcrum must be equal to the torque on the right of the fulcrum. The torque on each side is given by the product of the force and the distance from the fulcrum.
On the left side, the force is the weight of the box, which is mg = (25 kg)(9.8 m/s²) = 245 N. Let x be the distance from the left side of the board to the fulcrum.
On the right side, the force is the weight of the box, which is m2g = (15 kg)(9.8 m/s²) = 147 N. The distance from the fulcrum to the right side of the board is 3.0 m - x.
Setting the torques equal, we have:
245 N x = 147 N (3.0 m - x)
Simplifying and solving for x, we get:
245x = 441 - 147x
392x = 441
x = 1.125 m
Therefore, the fulcrum should be positioned 1.125 m from the left side of the board to balance the masses horizontally. The closest answer choice is (C) 1.1 m.
In this problem, the board is acting as a lever with the fulcrum in the middle. For the board to be in rotational equilibrium, the clockwise and counterclockwise torques acting on the board must be equal. The torque due to the weight of the first box (τ1) is given by τ1 = m1 * g * d, where m1 is the mass of the first box, g is the acceleration due to gravity, and d is the distance from the fulcrum to the first box. Similarly, the torque due to the weight of the second box (τ2) is given by τ2 = m2 * g * (L - d), where m2 is the mass of the second box and L is the length of the board.
At equilibrium, τ1 = τ2, which can be solved to find the value of d that balances the masses horizontally.
Learn more about torque here:
https://brainly.com/question/25708791
#SPJ4
The kinetic energy for a moving object is given by K E = 1/2 m v^2. Which of the following gives the correct units for energy?kg·m²/s²
The correct units for kinetic energy is, kg*m^2/s^2.
Units can be derived by looking at the units of the equation for kinetic energy: K E = 1/2 m v^2. The mass (m) is typically measured in kilograms (kg), while the velocity (v) is measured in meters per second (m/s). Squaring velocity gives units of m^2/s^2. Multiplying by mass and the 1/2 coefficient gives units of kg*m^2/s^2, which is equivalent to joules (J).
Joules are a derived unit of energy, defined as the amount of work done when a force of one newton (N) is applied over a distance of one meter (m). They are widely used in physics and engineering to quantify energy, as well as other quantities like work, power, and heat.
To know more about the kinetic energy, here
brainly.com/question/26472013
#SPJ4
--The complete question is, The kinetic energy for a moving object is given by K E = 1/2 m v^2. Which of the following gives the correct units for energy?
a. m/s
b. kg. m/s^2
c. kg. m s^2
d. kg. m^2/s^2--
a path of a particle of mass m under a central force f directed toward the center of force o is described by the logarithmic spiral r
If the central force is proportional to 1/r^2, the equation of motion is r'' = -(k/m) r^-2 + rθ'^2, where k is a constant is described by the logarithm spiral r.
What is Central force?A central force is a force that acts on an object that is dependent only on the distance between the two objects. Central forces do not depend on the angle between the two objects. Examples of central forces include gravity, electrostatic, and magnetic forces. Central forces are important in understanding the behavior of systems of particles, such as planets orbiting the sun. Central forces also play a role in systems of particles that interact with one another, such as atoms in a molecule. They can be attractive or repulsive, depending on the nature of the interaction.
The equation of a logarithmic spiral is given by:
r = ae^(bθ)
where, r is the distance from the centre of the spiral, θ is the angle between the radial line from the centre to the particle and a fixed reference line, a is a scaling factor that determines the initial distance from the centre and b is a constant that determines the tightness of the spiral.
In the case of a particle of mass m under a central force f directed toward the centre of force O, the equation of motion can be described using polar coordinates:
m(r'' - rθ'^2) = -f(r)
where r'' is the second derivative of r with respect to time, θ' is the first derivative of θ with respect to time, and f(r) is the magnitude of the central force, which depends only on the distance r from the centre of force.
Assuming that the central force is proportional to 1/r^2, i.e., f(r) = k/r^2, where k is a constant, then the equation of motion becomes:
m(r'' - rθ'^2) = -k/r^2
Rewrite this equation as:
r'' = -(k/m) r^-2 + rθ'^2
This is a second-order differential equation for r, which can be solved numerically to obtain the trajectory of the particle. The initial conditions for r and θ can be chosen based on the given values of a and b in the equation of the logarithmic spiral.
To know more about Central Force, visit:
https://brainly.com/question/898360
#SPJ4
Problem 3: A fireman has mass m; he hears the fire alarm and slides down the pole with acceleration a (which is less than g in magnitude). Part (a) Using the variables in the problem statement, write an equation giving the vertical force F resisting the force of gravity on the firefighter. Expression : F= Select from the variables below to write your expression. Note that all variables may not be required. B, Y, 0, a, b, c, d, g, h, j, k, m, n, P, S Part (b) If his mass m = 79.6-kg and he accelerates at a = 7.9 , what is the magnitude of the force of resistance in Newtons? Numeric : A numeric value is expected and not an expression. F=
the answer to the (a) F=m(a−g) and (b) ║F║= 440. 19 N. to solve this we need to use newton's law of motion as follows:
a) Our task is to write an equation giving the vertical force that must apply to the pole.
From the Newton's second law of the motions, the net force [tex](F_{net})[/tex] is
[tex](F_{net})[/tex] = ∑[tex]F= F_{1}[/tex] + [tex]F_{2}[/tex] + [tex]F_{3}[/tex] ..... = m.a
When we accord into equation (1), we get.
F-W = m.a
F−m⋅g = m.a
The vertical force from the equation (3) will be.
Fj= m.aj - m⋅gj
When we take the common factor, final equation will be.
F=m(a−g)
b) Our task is to determine the magnitude of the force.
║F║= m(a - g)
calculations
║F║ = 90kg [tex]( 5.0 \frac{m}{s_{2}} - 9.6 \frac{m}{s_{2}} )[/tex]
= 90 kg ( -4.81 [tex]m/s_{2}[/tex])
║F║= 440. 19 N
To learn more about newton's law of motion, visit: brainly.com/question/29775827
#SPJ4
Describe how you would use an uncalibrated force probe and the springs in Question 1 to develop a quantitative scale of force. How could you measure forces that do not correspond to exact numbers of stretched springs?fyi: Question 1 states you are given 10 identical springs. Describe how you would develop a scale of force using these springs.
Given 10 identical springs, we can use multiple springs in parallel to measure larger forces. We can attach the force probe to multiple springs and measure the amount of stretch.
To use the uncalibrated force probe and the springs in Question 1 to develop a quantitative scale of force, we can follow these steps:
1. Attach the uncalibrated force probe to one end of the spring and attach an object of known mass to the other end.
2. Record the length of the spring when it is at rest and when the object is attached. The difference between these two lengths will be the amount the spring is stretched by the weight of the object.
3. Repeat this process for different masses, recording the amount of stretch for each mass.
4. Plot the amount of stretch (in meters) versus the weight (in Newtons) for each mass. This will create a linear relationship between the amount of stretch and the weight.
5. Using this linear relationship, we can calibrate the force probe and develop a quantitative scale of force. We can now use the scale to measure the force applied to the probe by other objects by observing the amount of stretch in the spring.
If we encounter forces that do not correspond to exact numbers of stretched springs, we can estimate the force by interpolating between the values on the scale. For example, if a force stretches the spring to a length that is between the length for one and two stretched springs, we can estimate the force by interpolating between the force values for one and two springs.
Given 10 identical springs, we can use multiple springs in parallel to measure larger forces. We can attach the force probe to multiple springs and measure the amount of stretch for a given force. By combining the results from multiple springs, we can extend the range of forces we can measure with the setup
Learn more about force probe here brainly.com/question/30030899
#SPJ4
a football punter wants to kick the ball so that it is in the air for 4.1 s and lands 50 m from where it was kicked. assume that the ball leaves 1.0 m above the ground.
Answer:
Explanation:
To determine the initial velocity that the football punter needs to impart on the ball, we can use the equations of motion for a vertically thrown projectile under the influence of gravity.
The vertical displacement of the ball can be calculated using the equation:
d = vi*t + (1/2)at^2
where d is the vertical displacement, vi is the initial vertical velocity, t is the time in the air, and a is the acceleration due to gravity (9.8 m/s^2). Since the ball leaves 1.0 m above the ground and lands 50 m from where it was kicked, we can set d = 49 m.
The horizontal displacement of the ball can be calculated using the equation:
d = vi*t
where d is the horizontal displacement, vi is the initial horizontal velocity, and t is the time in the air. Since the ball should be in the air for 4.1 s, we can set d = 50 m.
We now have two equations with two unknowns: the initial vertical velocity (vi) and the initial horizontal velocity (vi). We can solve for these unknowns by using the equations above.
First, we can calculate the initial vertical velocity using the equation for vertical displacement:
vi = sqrt(2ad + vi^2)
Next, we can substitute this value for vi into the equation for horizontal displacement:
50 = 4.1 * vi
Solving for vi, we find that the initial horizontal velocity must be 12.2 m/s.
Finally, we can use the initial vertical velocity and horizontal velocity to calculate the initial velocity required to kick the ball so that it stays in the air for 4.1 s and lands 50 m from where it was kicked. This can be found using the Pythagorean theorem:
v = sqrt(vi^2 + vi^2)
where v is the initial velocity.
In conclusion, the football punter needs to impart an initial velocity of approximately 14.5 m/s on the ball to achieve the desired results.
A researcher wants to determine whether the circadian temperature cycle is less stable for older compared to middle aged adults. Body temperature in degrees Fahrenheit is measured every 15 minutes over a period of 3 days.
Choose the appropriate scale of measurement.
Nominal
Ordinal
Interval
Ratio
Approximately Interval
A researcher wants to know whether older persons' circadian temperature cycles are less stable than those of middle-aged adults.
What is the temperature measurement scale in degrees ?Scale in Celsius: This scale has an upper reference position (steam point) of 100° and a lower reference point (ice point), both of which are fixed at 0°. On this scale, the temperature was recorded in degrees Centigrade (° C).
What types of measure temperature scales are there? What connection do they have one another?There are two scales that used measure temperature: Celsius and Fahrenheit. The temperature will be reported in degrees Celsius on the centigrade scale. Degrees Fahrenheit will be used to express temperature on the Fahrenheit scale. The heat energy of Celsius to Fahrenheit.
To know more about heat energy visit :
https://brainly.com/question/25384702
#SPJ4
A sphere of radius 2.044 mm carries a total charge of 25.89 uC. What is the potential difference (VB-VA) between a location that is 3.28 m from the center of the sphere (point B) and another location that is 6.39 m from the center of the sphere (point A).
Hint: Remember that according to Gauss' Law, the electric field from a uniformly-charged sphere is the same as the electric field from a point charge of the same magnitude charge. What does that mean for the potential?
From point A to point B, the electric flow through a sphere with a radius of 2.044 mm is dependent on the total electrical current encompassed by this surface. Due to B(VB)=kqb=910925.8, there is an electric field.
What is the electric field sphere version of Gauss' law?The electric field from outside sphere is comparable to the area from either a charged particle with the a net charge of Q, according to Gauss' law, whereas the electromagnetic current on the inside of the sphere is zero. For a hollow or hollow sphere, this conclusion holds valid. Therefore, we can state that inside a conducting sphere, the electromagnetic current is zero.
What is the formula and formulation of Gauss's law?According to the Gauss Theorem, the total electric flow through with a closed surface exceeds the net electrical flux the Gauss theorem's mathematical formula is =qenclosed0 if there is an electric field in a vacuum.
To know more about electric field visit :
https://brainly.com/question/8971780
#SPJ4