goran took 6 tests this year. his mean score was 86 points. how many total points did he earn for the 6 tests

the probability of blindly drawing at least one blue marble in two attempts from the given bag of marbles is 1/2 or 50%.

To calculate the probability of drawing at least one blue marble in two attempts from a bag containing one blue, one green, one orange, and one yellow marble, we need to consider the possible outcomes.

In the first attempt, there are four marbles in the bag, and one of them is blue. So, the probability of drawing a blue marble on the first attempt is 1/4.

In the second attempt, if a blue marble was not drawn in the first attempt, there will be three marbles left in the bag, and one of them is blue. The probability of drawing a blue marble on the second attempt, given that a blue marble was not drawn in the first attempt, is 1/3.

To find the probability of drawing at least one blue marble, we can calculate the probability of the complement event (not drawing a blue marble in both attempts) and subtract it from 1:

Probability of drawing at least one blue marble = 1 - Probability of not drawing a blue marble in both attempts

Probability of not drawing a blue marble in both attempts = (3/4) * (2/3) = 1/2

Probability of drawing at least one blue marble = 1/2 or 50%.

To know more about probability, refer here:

https://brainly.com/question/31828911

#SPJ11

The probability that a random sample of 4 of the articles will contain a defective article is approximately 0.2916, or about 29.16%.

To find the probability that a random sample of 4 articles will contain a certain number of defective articles, we can use the binomial probability formula:

P(X = k) = (nCk) * (p^k) * (1-p)^(n-k)

where:
- n is the total number of articles in the sample (4 in this case)
- k is the number of defective articles we want to find the probability for
- p is the probability of an article being defective (1/10)
- 1-p is the probability of an article not being defective (9/10)
- nCk represents the number of combinations of n items taken k at a time

It appears that you haven't mentioned the specific number of defective articles you want in the sample of 4. However, you can use the formula above and plug in the values for k (0, 1, 2, 3, or 4) to find the probability for any desired number of defective articles in the sample.

to learn more about probability click here:

brainly.com/question/29221515

#SPJ11

A ski resort asked a random sample of guests to rate their satisfaction on various attributes of their visit on a scale of 1–5 with 1 = very unsatisfied and 5 = very satisfied.

(a) The fitted regression equation is:
y = 2.9952 + 0.1530 * Lift Weight + 0.2477 * Amount Groomed + 0.0490 * Ski Patrol Visibility - 0.1136 * Friendliness Hosts
(b) The coefficients represent the impact that each predictor variable has on the overall satisfaction score. Specifically:
- The intercept (2.9952) represents the overall satisfaction score when all predictor variables are equal to zero.
- The coefficient for Lift Wait (0.1530) suggests that for every one unit increase in lift line wait time (measured in minutes), the overall satisfaction score is expected to increase by 0.1530 points, on average.
- The coefficient for Amount Groomed (0.2477) suggests that for every one unit increase in the amount of ski trail grooming (measured on a scale of 1-5), the overall satisfaction score is expected to increase by 0.2477 points, on average.
- The coefficient for Ski Patrol Visibility (0.0490) suggests that for every one unit increase in safety patrol visibility (measured on a scale of 1-5), the overall satisfaction score is expected to increase by 0.0490 points, on average.
- The coefficient for FriendlinessHosts (-0.1136) suggests that for every one unit increase in friendliness of guest services (measured on a scale of 1-5), the overall satisfaction score is expected to decrease by 0.1136 points, on average.
(c) To make a prediction for overall satisfaction when all four areas are rated a 3, we can simply plug in the values into the fitted regression equation:
y = 2.9952 + 0.1530 * 3 + 0.2477 * 3 + 0.0490 * 3 - 0.1136 * 3
y= 3.9322
Therefore, the predicted overall satisfaction score when lift line wait time, amount of ski trail grooming, safety patrol visibility, and friendliness of guest services are all rated as 3 is 3.9322.

(a) To write the fitted regression equation, we will plug in the given coefficients for each predictor variable:
y= 2.9952 + 0.1530 * Lift weight + 0.2477 * Amount Groomed + 0.0490 * Sk iPatrol Visibility - 0.1136 * Friendliness Hosts
(d) To make a prediction for Overall Satisfaction when a guest's satisfaction in all four areas is rated a 3, we will substitute the value 3 for each predictor variable in the fitted regression equation:
y= 2.9952 + 0.1530 * 3 + 0.2477 * 3 + 0.0490 * 3 - 0.1136 * 3
Now, perform the calculations:
y= 2.9952 + 0.4590 + 0.7431 + 0.1470 - 0.3408
y = 4.0035 (rounded to 4 decimal places)
So, the predicted Overall Satisfaction score when a guest's satisfaction in all four areas is rated a 3 is 4.0035.

Visit here to learn more about Ski Patrol Visibility:

brainly.com/question/14326039

#SPJ11

The explicit rule for this situation is f(n) = 9 - n and there will be 4 cans in the 5th row

Given thay

This means that the explicit rule is 1 removed from the previous row to get the current number of cans

So, we have

f(n) = 9 - n

Where n is the nth row

In the 5th row, we have

n =5

So, we have

f(5) = 9 - 5

Evaluate

f(5) = 4

Hence, there will be 4 cans in the 5th row

Read more about sequence at

https://brainly.com/question/6561461

#SPJ1

The largest value that should appear on the x-axis assuming that the tick marks will be separated by 5 is 95.

Since the tick marks are separated by 5, we can start with the smallest tick mark at 0 and add 5 for each subsequent tick mark.

To determine the largest value that should appear on the x-axis, we need to find the largest multiple of 5 that is less than or equal to the largest value in the data set. In this case, we don't have any information about the data set, so we can't determine the largest value.

However, we can assume that the x-axis should be long enough to accommodate the largest value that we expect to see. If we assume that the largest value is 100, then the largest multiple of 5 that is less than or equal to 100 is 95.

Therefore, the largest value is 95.

To know more about multiple, refer here:

https://brainly.com/question/21920862#

#SPJ11

The value of point A is less than -3: false.

In Mathematics and Geometry, a number line simply refers to a type of graph with a graduated straight line which comprises both positive and negative numbers that are placed at equal intervals along its length.

This ultimately implies that, a number line primarily increases in numerical value towards the right from zero (0) and decreases in numerical value towards the left from zero (0).

From the number line shown in the image attached below, we have the following point:

Point A = -2

In conclusion, -2 is greater than -3 based on the number line shown.

Read more on number line here: brainly.com/question/22515080

#SPJ1

Missing information:

The question is incomplete and the complete question is shown in the attached picture.

To find the exact probability, you'll need the value of 'p', which is the probability of appropriate treatment and compliance using binomial probability.

To determine the probability that among 10 true hypertensives at least 50% are being treated appropriately and are complying with this treatment, we can use the binomial probability formula. Here's a step-by-step explanation:

1. Define the terms:
  - n = number of trials (10 true hypertensives)
  - k = number of successful outcomes (at least 50% being treated appropriately and complying, so 5 to 10)
  - p = probability of success (appropriate treatment and compliance, let's assume it as 'p')
  - q = probability of failure (1 - p)

2. Use the binomial probability formula:
  P(X = k) = C(n, k) * [tex](p^k) * (q^(n-k))[/tex]

3. Sum the probabilities for k = 5 to k = 10:
  P(at least 50% treated) = P(X = 5) + P(X = 6) + ... + P(X = 10)

4. Calculate the probabilities using the formula for each k value:
  P(X = 5) = C(10, 5) * (p^5) * (q^5)
  P(X = 6) = C(10, 6) * (p^6) * (q^4)
  ...
  P(X = 10) = C(10, 10) * (p^10) * (q^0)

5. Add the probabilities to find the final probability:
  P(at least 50% treated) = P(X = 5) + P(X = 6) + ... + P(X = 10)

To find the exact probability, you'll need the value of 'p', which is the probability of appropriate treatment and compliance. Once you have that value, plug it into the calculations above and sum the probabilities to get the final answer.

To learn more about binomial probability, refer here:

https://brainly.com/question/31197941#

#SPJ11

The 95% confidence interval for the mean gas mileage of a 2012 Prius by all drivers who participate on fueleconomy.gov would depend on the sample size and the sample mean and standard deviation of the gas mileage data.

To calculate a 95% confidence interval for the mean gas mileage of a 2012 Prius by all drivers who participate on fueleconomy.gov, we would need to gather a sample of gas mileage data from the website. We would then calculate the sample mean and standard deviation of the gas mileage.
Assuming the sample follows a normal distribution and we have a sample size of at least 30, we can use the t-distribution to calculate the confidence interval. With a 95% confidence level and n degrees of freedom (n-1 = sample size - 1), we can look up the t-value using a t-distribution table or calculator.
Once we have the t-value, we can plug it into the following formula to calculate the confidence interval:
Confidence interval = sample mean ± (t-value * standard error)
The standard error is calculated by dividing the sample standard deviation by the square root of the sample size.

Learn more about standard deviation here

https://brainly.com/question/475676

#SPJ11

In order to determine if the estimated betas are significant, we can use a t-test. The t-test assesses the statistical significance of the relationship between the independent variable(s) and the dependent variable.

In this context, the betas represent the estimated coefficients for each independent variable.

If the t-test yields a p-value less than the predetermined significance level (usually 0.05), it indicates that the betas are significant. This means that there is a statistically significant relationship between the independent variables and the dependent variable. On the other hand, if the p-value is greater than the significance level, the betas are not significant, and we cannot conclude that there is a relationship between the variables.

When it comes to interpreting the estimated coefficient for the Fitness Center, we should consider the magnitude and direction of the beta value. A positive beta value indicates a positive relationship between the Fitness Center variable and the dependent variable, meaning that as the value of the Fitness Center variable increases, so does the dependent variable. Conversely, a negative beta value implies a negative relationship, with an increase in the Fitness Center variable leading to a decrease in the dependent variable.

The magnitude of the coefficient for the Fitness Center reflects the strength of the relationship. A larger absolute value indicates a stronger relationship between the variables, while a smaller absolute value suggests a weaker relationship. It's important to remember that correlation does not imply causation, so we can only draw conclusions about the relationship between the variables, not a cause-and-effect relationship.

In summary, to determine the significance of the estimated betas, we can use a t-test. The direction and magnitude of the estimated coefficient for the Fitness Center can help us understand the relationship between the variables. However, it is essential to keep in mind that correlation does not imply causation.

To learn more about independent variable click here

brainly.com/question/17034410

#SPJ11

The researcher most likely used the mean as the measure of central tendency to describe,

the hospital admission rates for coronary heart disease at the 10 local hospitals. The mean is calculated by adding up all of the hospital admission rates and dividing by the total number of hospitals.

By identifying the two hospitals with the highest overall rates of hospital admissions, the researcher likely calculated the mean of all the hospital admission rates and compared each hospital's rate to this value.

This helps to identify which hospitals had rates that were higher or lower than average.

However, without more information on the data distribution, it is possible that the researcher could have also used the median or mode as the measure of central tendency.

Learn more about data here:brainly.com/question/29122373

#SPJ11

The least amount Kayla's grandfather can spend on the wood for the toy box is $138.

To determine the least amount Kayla's grandfather can spend on the wood for the toy box, we first need to find the surface area of the box, which is 2 ft tall, 2.5 ft wide, and 4 ft long.

The surface area of a rectangular box can be calculated using the formula: SA = 2lw + 2lh + 2wh, where l is the length, w is the width, and h is the height.

Plugging in the values, we get:
SA = 2(4)(2.5) + 2(4)(2) + 2(2.5)(2) = 20 + 16 + 10 = 46 square feet.

Since the wood costs $3 per square foot, the least amount Kayla's grandfather can spend on the wood is:
Cost = 46 square feet * $3 per square foot = $138.

To learn more about surface area click here

brainly.com/question/29101132

#SPJ11

Answer:

8 10's were multiplied

Step-by-step explanation:

10 - 1 = 9

100 - 1 = 99

1,000 - 1 = 999

10^8 - 1 = 100,000,000 - 1 = 99,999,999

9 × 8 = 72

The exponential function graphed in this problem is defined as follows:

y = 2(0.5)^x.

An exponential function has the definition presented as follows:

y = ab^x.

In which the parameters are given as follows:

The graph crosses the y-axis at y = 2, hence the parameter a is given as follows:

a = 2.

When x increases by one, y is divided by two, hence the parameter b is given as follows:

b = 0.5.

Thus the function is:

y = 2(0.5)^x.

More can be learned about exponential functions at brainly.com/question/2456547

#SPJ1

If the significance level that you obtain for Levene's Test for Equality of Variances equals .013, it means that there is a statistically significant difference between the variances of the groups being compared. In this case, the assumption of homogeneity of variance is violated.

To address this issue, you have a few options. One approach is to use a modified version of the t-test called the Welch's t-test, which does not assume equal variances. Another option is to use a non-parametric test such as the Mann-Whitney U test or the Kruskal-Wallis test, which do not require the assumption of equal variances.

It is important to choose an appropriate statistical test based on the specific research question and the data being analyzed. While violating the assumption of equal variances can complicate statistical analysis, there are alternative methods available to ensure accurate and valid results.

Learn more about Equality here:

https://brainly.com/question/9070018

#SPJ11

To determine the angle from the vernal equinox to the station at the time of measurement, we need to use the following formula:

Angle = (Sidereal Time at Greenwich + Longitude of the Station - Hour Angle of the Object) * 15 degrees/hour

First, we need to determine the Hour Angle of the Object, which is the amount of time since the object (in this case, the radar measurement) passed over the Greenwich meridian. We know that the radar measurement occurred 2.8 hours after noon on January 1, so the Hour Angle of the Object is:

Hour Angle = 2.8 hours * 15 degrees/hour = 42 degrees

Next, we can plug in the values we know into the formula:

Angle = (100 degrees + (-4 degrees) - 42 degrees) * 15 degrees/hour
Angle = 54 degrees * 15 degrees/hour
Angle = 810 degrees/hour

Therefore, the angle from the vernal equinox to the station at the time of the radar measurement is 810 degrees/hour.

Learn more about vernal equinox here: brainly.com/question/30833797

#SPJ11

The two way frequency table is discussed below. The table to show the relative frequencies for each grade category is discussed below. According to the relative frequency table, 8th grade had the greatest number of students who preferred one of the toppings.

The completed two-way frequency table is shown below

               Cheese         Pepperoni           Veggie           Total

7                20                      12                      8                    40

8                18                       16                      14                   48

Total          38                      28                     22                  88

To find the relative frequency for each grade category, we need to divide each frequency by the total number of students

                Cheese         Pepperoni           Veggie            Total

7                0.227             0.136                  0.090              0.453

8                0.204             0.181                   0.159               0.544

Total           0.431              0.317                  0.249               0.997

According to the relative frequency table, 8th grade had the greatest number of students who preferred one of the toppings, with a relative frequency of 0.544.

To know more about frequency table here

https://brainly.com/question/31189964

#SPJ1

The F-ratio is a statistic used in the analysis of variance (ANOVA) test to compare the means of two or more groups. The F-ratio is calculated as the ratio of the between-group variance to the within-group variance. A negative F-ratio is not possible, so it is likely that there was an error in the calculation or reporting of the statistic.

Assuming that the F-ratio was calculated correctly and reported accurately, a negative F-ratio implies that the between-group variance is smaller than the within-group variance. This is unusual and could indicate that there are issues with the data, such as outliers or a violation of the assumption of homogeneity of variances.

In general, a significant F-ratio (i.e., one that is large enough to reject the null hypothesis) indicates that there are differences between the means of the groups being compared.

Learn more about F-ratio

https://brainly.com/question/28523784

#SPJ4

The missing angle in the triangle is as follows:

m∠ABC = 54 degrees

When lines segment intersect, angle relationships are formed such as vertically opposite angles,  adjacent angles etc.

Therefore, let's find m∠ABC.

Hence,

9x - 9 + 3x + 9 = 180 (sum of angles on a straight line)

12x  = 180

divide both sides of the equation by 12

x = 180 / 12

x = 15

Therefore,

m∠ABC = 3x + 9(Vertically opposite angles)

m∠ABC = 3(15) + 9

m∠ABC = 45 + 9

m∠ABC = 54 degrees

learn more on angles here: https://brainly.com/question/25950519

#SPJ1

The fraction of washers with thicknesses greater than 2.4 millimeters. We need to understand the normal distribution of washer thicknesses. In a normal distribution, data is centered around the mean value, and the standard deviation (SD) determines the spread.

For this problem, we need the mean thickness and SD of the washers being produced.

Once we have the mean and SD, we can calculate the z-score, which represents the number of standard deviations a data point is from the mean. The formula for the z-score is:

Z = (X - mean) / SD

Where X is the specified thickness (2.4 millimeters in this case). After calculating the z-score, we can use a standard normal distribution table (also known as a z-table) to find the corresponding area to the right of the z-score. This area represents the fraction of washers that are expected to be greater than 2.4 millimeters thick.

Unfortunately, without the mean and standard deviation values, we cannot provide a specific answer to your question. However, once you have those values, you can follow the steps above to find the fraction of washers with thicknesses greater than 2.4 millimeters.

Learn more about fraction  here:

https://brainly.com/question/10708469

#SPJ11

When employees have different responsibilities, those relationships can be modeled with multiple associations between the employee class and the linked class.

In object-oriented programming, a class is a blueprint for creating objects that have similar properties and behaviors. One of the key concepts in class design is associations, which represent relationships between classes. Associations are used to define how objects of one class are connected to objects of another class.

When employees have different responsibilities, it means that there are multiple ways in which they can be associated with other classes. For example, a software company may have a class of employees who are responsible for developing software, and another class of employees who are responsible for testing the software. Each of these classes has a different set of responsibilities and requires different skills and knowledge.

To model these relationships, we can create multiple associations between the employee class and the linked class. For example, we could create one association between the employee class and the software development class, and another association between the employee class and the software testing class. Each of these associations would have different attributes, such as the employee's role, responsibilities, and qualifications.

By modeling these relationships with multiple associations, we can create more accurate and flexible class designs that reflect the real-world relationships between employees and their responsibilities. This approach also allows us to easily modify or extend the class design as the requirements change, without having to make major changes to the existing code. Overall, multiple associations provide a powerful tool for designing robust and adaptable class structures.

To learn more about relationships refer here:

https://brainly.com/question/28498065

#SPJ11

Considering the random sample of 500 people from the 2000 U.S. Census with a mean commute time of 28.4 minutes and a standard deviation of 18.9 minutes, we cannot definitively conclude that the mean commute time in the U.S. is less than half an hour.

Based on the information provided, we can't definitively conclude that the mean commute time in the U.S. is less than half an hour. While the sample mean of 28.4 minutes is less than half an hour, the standard deviation of 18.9 minutes is quite large. This suggests that there is a lot of variability in the commute times reported in the sample, and it's possible that there are many people with much longer commutes that are driving up the overall mean. Additionally, the fact that commute times in the U.S. are heavily skewed to the right means that the distribution is not symmetrical and may not be well-represented by the mean alone.

To make a more definitive conclusion, we would need to perform a hypothesis test with a null hypothesis that the mean commute time in the U.S. is half an hour or more and a significance level of our choice.

While the sample mean is close to 30 minutes, the data is heavily skewed to the right, which means that the true population mean might be different. A larger sample size or more representative data would be needed to make a stronger conclusion.

Learn more about null hypothesis at: brainly.com/question/28920252

#SPJ11

Answer:

55

Step-by-step explanation:

test taking strategy if you have no idea how to calculate the angle: n is an acute angle, so definitely not 100 or 110.  it can't be 25 cause it appears much bigger than 25. so it has to be 55.

If we leave off the error term from the population linear model, the left-hand side of the equation is now the expected value of Y for a given x value. false

The error term in a linear regression model captures the unobserved factors that affect the dependent variable Y. If we remove the error term, we would end up with a model that only explains the relationship between the dependent variable and the independent variable(s).

The left-hand side of the equation represents the actual value of the dependent variable Y, whereas the right-hand side represents the predicted or expected value of Y given the values of the independent variables.

In a population linear model, if we remove the error term, the left-hand side would still represent the actual values of Y in the population, and the right-hand side would represent the expected value of Y given the values of the independent variables.

Learn more about linear model

https://brainly.com/question/29757372

#SPJ4

A relationship between a causal variable and a dependent variable within one value of another causal variable is known as a conditional relationship.

A relationship between a causal variable and a dependent variable within one value of another causal variable is known as a conditional relationship or a moderated relationship. In this type of relationship, the relationship between the causal variable and the dependent variable is not fixed, but instead depends on the level or value of the moderating variable.

For example, let's say we want to investigate the relationship between exercise and weight loss, and we suspect that age may moderate this relationship. In other words, we think that the relationship between exercise and weight loss may be different for different age groups. We might find that for younger people, exercise is a strong predictor of weight loss, while for older people, exercise has little to no effect on weight loss. In this case, age is the moderating variable that affects the relationship between exercise and weight loss.

for such more question on conditional relationship

https://brainly.com/question/24567022

#SPJ11

The probability that all of the offices in the environmental club are filled by members of the debate team is approximately 0.021 or 2.1%.

To find the probability that all of the offices in the environmental club are filled by members of the debate team, we need to use the concept of combinations.

First, we need to find the total number of ways to fill all four offices from a pool of 13 candidates. This can be done using the formula for combinations:

[tex]C(13,4) = \frac{13!}{4!(13-4)!} = \frac{13\times12\times11\times10}{4\times3\times2\times1} = 715[/tex]

So there are 715 different ways to fill the four offices.

Next, we need to find a number of ways to fill all four offices with members of the debate team. There are 6 members of the debate team, so we need to choose all four of them:

[tex]C(6,4) = \frac{6!}{4!(6-4)!} = \frac{6\times5\times4\times3}{4\times3\times2\times1} = 15[/tex]

So there are 15 different ways to fill all four offices with members of the debate team.

Finally, we can find the probability by dividing the number of ways to fill all four offices with members of the debate team by the total number of ways to fill the four offices:

P(all offices filled by debate team) = 15/715 ≈ 0.021

To learn more about probability

https://brainly.com/question/30034780

#SPJ4

In this survey of 120 consumers, we are given information about the preferences for Brand A and Brand B, as well as the overlap of those who buy both brands. To determine how many consumers buy either Brand A or Brand B, we can use the principle of inclusion-exclusion.

According to the survey, 80 consumers buy Brand A, 68 buy Brand B, and 42 buy both brands. First, we need to find the total number of consumers who buy either Brand A or Brand B without considering the overlap. To do this, we add the number of consumers for both brands:

80 (Brand A) + 68 (Brand B) = 148 consumers

Now, we have to account for the overlap, which are the 42 consumers who buy both brands. Since these consumers have been counted twice (once for each brand), we need to subtract the overlap from the total:

148 (total) - 42 (overlap) = 106 consumers

Therefore, 106 consumers participating in the survey buy either Brand A or Brand B.

Learn more about consumers here:

https://brainly.com/question/15869639

#SPJ11

The number of solutions that a homogeneous system of equations with 13 variables and 8 equations will have depends on the rank of the coefficient matrix.

If the rank of the coefficient matrix is less than the number of variables (13), then the system will have infinitely many solutions.

If the rank is equal to the number of variables, then the system will have a unique solution. If the rank is less than the number of variables but greater than the number of equations (8), then the system will have a nontrivial solution.

It is not possible to determine the rank of the coefficient matrix or the number of solutions without actually solving the system or knowing more information about the specific equations involved.

for such more question on word problem

https://brainly.com/question/1781657

#SPJ11

If you rolled two dice, recorded the face values and summed them up, you would be collecting quantitative data. This is because quantitative data is numerical in nature and involves counting, measuring or quantifying something.

In this case, the numbers on the faces of the dice would be counted and added together to obtain a total sum. This data can be further classified as discrete since the possible outcomes of rolling dice are limited to a set of discrete values.

Therefore, this data can be easily analyzed using statistical methods to determine the probability of certain outcomes occurring. Collecting quantitative data is essential in many fields such as science, economics, and finance, as it provides valuable insights into the behavior and trends of various phenomena.

In this situation, the face values on the dice represent numbers, and the sum of these values is also a number. The data you collect can be analyzed using statistical methods and can provide meaningful insights.

To know more about probability click here

brainly.com/question/15124899

#SPJ11

Tony sent 4 times as many messages as Kira. Reuben sent 17 messages, Kira sent 24 messages, and Tony sent 96 messages.

Let's start by assigning variables to represent the number of messages each person sent.
Let's say that Reuben sent x messages.
Then we know that Kira sent 7 more messages than Reuben, so Kira sent x+7 messages.
We also know that Tony sent 4 times as many messages as Kira, so Tony sent 4(x+7) messages.
We're told that the total number of messages sent was 137, so we can set up an equation:
x + (x+7) + 4(x+7) = 137
Simplifying this equation:
6x + 35 = 137
Subtracting 35 from both sides:
6x = 102
Dividing both sides by 6:
x = 17
So Reuben sent 17 messages, Kira sent 7 more than Reuben which is 17+7=24 messages, and Tony sent 4 times as many messages as Kira which is 4(24)=96 messages.

Learn more about Reuben here

https://brainly.com/question/30997445

#SPJ11