Given two coordinate systems A(a1,a2,a3) and B(b1,b2,b3). Coordinate system B was obtained from A via 3-3-1 sequence with angles 30◦, 45◦, and 15◦. A vector X is defined in a mixed coordinate system as X= 1a1+ 6a3+ 4b2−7b1. What are the components of X in coordinate system A and B?

The three numbers are x = y = 9.625 and z = 0.75, and the maximum value of the quantity 2 is 20.375

We can use the AM-GM inequality to maximize the quantity 2.

From the given equation, we have:

1/yxz = 20

Multiplying both sides by yxz, we get:

1 = 20yxz

yxz = 1/20

Now, let's consider the sum of the three numbers:

x + y + z = 20

Using the AM-GM inequality, we have:

[tex](x + y + z)/3 > = (xyz)^{(1/3)}[/tex]

Substituting the value of xyz, we get:

[tex](x + y + z)/3 > = (1/20)^{(1/3)}[/tex]

(x + y + z)/3 >= 0.25

Multiplying both sides by 3, we get:

x + y + z >= 0.75

Since we want the sum of the numbers to be exactly 20, we can rewrite this as:

20 - x - y >= 0.75

x + y <= 19.25

So, the sum of x and y must be less than or equal to 19.25.

To maximize the quantity 2, we can take x = y = 9.625 and z = 0.75,

since this makes the sum of x and y as close to 19.25 as possible while still satisfying the equation and being positive.

Therefore, the three numbers are x = y = 9.625 and z = 0.75, and the maximum value of the quantity 2 is:

2(x + yz) = 2(9.625 + 0.75*0.75) = 20.375/

For similar question on inequality.

https://brainly.com/question/24372553

#SPJ11

To find positive number whose sum is 20 and the quantity 2 is maximized, we can use the AM-GM inequality. According to this inequality, the arithmetic mean of a set of positive numbers is always greater than or equal to their geometric mean. That is,

(a + b + c)/3 ≥ (abc)^(1/3)

Now, we need to rearrange the equation 1/yxz = 20 to get the values of a, b, and c. We can rewrite it as yxz = 1/20.

Next, we can assume that a + b + c = 20 and apply the AM-GM inequality to the product abc to maximize the value of 2. That is,

2 = 2(abc)^(1/3) ≤ (a + b + c)/3

Hence, the maximum value of 2 is 2(20/3)^(1/3), which occurs when a = b = c = 20/3.

Therefore, the positive numbers whose sum is 20 and the quantity 2 is maximized are 20/3, 20/3, and 20/3.
To maximize the quantity 2 with the given equation 1/(yxz) = 20 and positive numbers whose sum is 20 (x+y+z=20), we first rewrite the equation as yxz = 1/20. Now, using the Arithmetic Mean-Geometric Mean (AM-GM) inequality, we have:

(x+y+z)/3 ≥ ((xyz)^(1/3))

Since x, y, and z are positive, we can say that:

20/3 ≥ ((1/20)^(1/3))

From here, we find that x, y, and z should be as close to each other as possible to maximize the quantity 2. One such possible solution is x = y = 19/3 and z = 2/3. Therefore, the positive numbers x, y, and z are approximately 19/3, 19/3, and 2/3, which maximizes the quantity 2.

Learn more about Arithmetic Mean-Geometric Mean here: brainly.com/question/31962103

#SPJ11

To construct a value-weighted portfolio, we need to allocate funds based on the market capitalization of each stock. The total market cap of the four stocks is $159 million. Therefore, OGG represents 32.7%, HNL represents 47.8%, KOA represents 11.9%, and LIH represents 7.5% of the total market cap. If we have $501,000 to invest, we should invest $163,710 in OGG, $239,430 in HNL, $59,490 in KOA, and $37,370 in LIH.

A value-weighted portfolio is a strategy that allocates funds based on the market capitalization of each stock. It means investing more in companies with a higher market capitalization and less in companies with a lower market capitalization. In this case, we calculate the percentage of each stock's market capitalization to the total market capitalization of all four stocks and allocate funds accordingly.

To construct a value-weighted portfolio of the four stocks, we should allocate funds based on the market capitalization of each stock. In this case, we allocate funds in the proportion of 32.7%, 47.8%, 11.9%, and 7.5% for OGG, HNL, KOA, and LIH, respectively. This ensures that we invest more in companies with a higher market capitalization and less in companies with a lower market capitalization.

To know more about stock,market cap visit:

https://brainly.com/question/29984148

#SPJ11

To find out how many applications can be made with the 26-gram container, we need to divide the total amount of cream in the container by the average amount of cream used per application.

Total amount of cream (container) = 26 grams
Average amount of cream per application = 1 6/7 grams

First, let's convert the mixed fraction 1 6/7 to an improper fraction:
(1 * 7) + 6 = 13/7 grams

Now, divide the total amount of cream by the average amount of cream per application:

26 grams ÷ 13/7 grams

To divide by a fraction, you multiply by its reciprocal (the fraction flipped):

26 * 7/13

Now, cancel out the common factor (13):

(26/13) * (7/1)

2 * 7 = 14

So, you can make 14 applications with the 26-gram container.

To know more about applications, visit:

https://brainly.com/question/31164894

#SPJ11

The problem of determining the satisfiability of boolean formula in disjunctive normal form (DNF) is known as the DNF-SAT problem. This problem can be solved in polynomial time using an algorithm called the resolution algorithm. The resolution algorithm works by repeatedly applying the resolution rule to simplify the formula until it is either determined to be satisfiable or unsatisfiable.

DNF is a standard form of representing boolean formulas, where the formula is expressed as a disjunction of conjunctions of literals. The DNF-SAT problem involves determining whether there exists an assignment of truth values to the variables in the formula that makes the formula true.

The resolution algorithm is a complete and sound method for solving the DNF-SAT problem. It works by iteratively applying the resolution rule, which allows two clauses to be combined into a new clause that is a logical consequence of the original clauses. The algorithm continues until either a contradiction is reached (meaning the formula is unsatisfiable) or until the formula is simplified to a single clause (meaning the formula is satisfiable).

In conclusion, the DNF-SAT problem is polynomial-time solvable using the resolution algorithm. This is an important result in computational complexity theory because it shows that some boolean formula problems can be solved efficiently, which has implications for the development of algorithms in other fields, such as artificial intelligence and optimization.

To know more about disjunctive normal form visit:

https://brainly.com/question/31955755

#SPJ11

the simplified expression is (cos(x) - sin(x))/cos(x).

We can use the fact that cot(x) = 1/tan(x) and csc(x) = 1/sin(x) to simplify the expression:

tan(x)(cot(x) - csc(x)) = tan(x)(1/tan(x) - 1/sin(x))

= tan(x)/tan(x) - tan(x)/sin(x)

= 1 - sin(x)/cos(x)

= (cos(x) - sin(x))/cos(x)

what is expression?

In mathematics, an expression is a combination of symbols and/or values that represents a mathematical quantity or relationship between quantities. Expressions can involve variables, numbers, and mathematical operations such as addition, subtraction, multiplication, division, exponents, and roots.

For example, "2 + 3" is an expression that represents the sum of the numbers 2 and 3, and "x^2 - 3x + 2" is an expression that involves the variable x and represents a quadratic function. Expressions can be used to simplify or evaluate mathematical equations and formulas, and they are a fundamental part of algebra, calculus, and other branches of mathematics.

To learn more about mathematical visit:

brainly.com/question/15209879

#SPJ11

Answer:

x=17 degrees

Step-by-step explanation:

All 3 angles = 180 degrees

So 90 + 54 + (x+19) = 180

Combine like terms

163 + x = 180

Subtract 163 from both sides

x = 180-163

x = 17

The line integral ∫cyds is equal to 7 + (2/3).

To evaluate the line integral ∫cyds, where the curve C is defined by the line segment from point (0, 1, 1) to point (2, 2, 3), and the vector field F(x, y) = (2x + 3)i + (3x + 2y)j, we need to parameterize the curve and calculate the dot product of the vector field and the tangent vector.

Let's start by finding the parameterization of the line segment C.

The equation of the line passing through the two points can be written as:

x = 2t

y = 1 + t

z = 1 + 2t

where t ranges from 0 to 1.

The tangent vector to the curve C can be found by differentiating the parameterization with respect to t:

r'(t) = (2, 1, 2)

Now, let's calculate the line integral using the parameterization of the curve and the vector field:

∫cyds = ∫(0 to 1) F(x, y) ⋅ r'(t) dt

Substituting the values for F(x, y) and r'(t), we have:

∫cyds = ∫(0 to 1) [(2(2t) + 3)(2) + (3(2t) + 2(1 + t))(1)] dt

Simplifying further, we get:

∫cyds = ∫(0 to 1) (4t + 3 + 6t + 2 + 2t + 2t^2) dt

∫cyds = ∫(0 to 1) (10t + 2 + 2t^2) dt

Integrating term by term, we have:

∫cyds = [5t^2 + 2t^3 + (2/3)t^3] evaluated from 0 to 1

Evaluating the integral, we get:

∫cyds = [5(1)^2 + 2(1)^3 + (2/3)(1)^3] - [5(0)^2 + 2(0)^3 + (2/3)(0)^3]

∫cyds = 5 + 2 + (2/3) - 0 - 0 - 0

∫cyds = 7 + (2/3)

Therefore, the line integral ∫cyds is equal to 7 + (2/3).

To learn more about integral

https://brainly.com/question/22008756

#SPJ11

The values of x that make the function undefined are x = 2 and x = -2. These values make the denominator equal to zero, causing the function to be undefined. Note that x = 3 does not make the denominator zero, so the function is defined for x = 3.

To determine the values that would make the function f(x) = (3-x) / (x^2 - 4) undefined, we need to find the values of x for which the denominator of the fraction becomes zero.

The denominator of the function is x^2 - 4. To find the values of x that make the denominator zero, we'll set x^2 - 4 equal to zero and solve for x:

x^2 - 4 = 0

We can factor this expression as a difference of squares:

(x + 2)(x - 2) = 0

Now, we'll solve for x by setting each factor equal to zero:

1) x + 2 = 0
  x = -2

2) x - 2 = 0
  x = 2

So, the values of x that make the function undefined are x = 2 and x = -2. These values make the denominator equal to zero, causing the function to be undefined. Note that x = 3 does not make the denominator zero, so the function is defined for x = 3.

To know more about fraction refer to

https://brainly.com/question/10354322

#SPJ11

(a) Let's analyze the relation R defined as XRy if y can be obtained from x by swapping any two bits.

To determine if R is an equivalence relation, we need to check three conditions: reflexivity, symmetry, and transitivity.

Reflexivity: For any x in D, we need to check if xRx holds true.

In this case, swapping any two bits of x with itself will result in the same value x. Therefore, xRx holds true for all x in D.

Symmetry: For any x and y in D, if xRy holds true, then yRx should also hold true.

Swapping any two bits of x to obtain y and then swapping the same two bits of y will result in x again. Thus, if xRy is true, yRx is also true.

Transitivity: For any x, y, and z in D, if xRy and yRz hold true, then xRz should also hold true.

If we can obtain y from x by swapping two bits and obtain z from y by swapping two bits, we can perform both swaps together to obtain z from x. Therefore, if xRy and yRz are true, xRz is also true.

Since the relation R satisfies all three conditions (reflexivity, symmetry, and transitivity), we can conclude that R is an equivalence relation.

(b) Let's analyze the relation R defined as XRy if y can be obtained from x by reordering the bits in any way.

To determine if R is an equivalence relation, we again need to check the three conditions: reflexivity, symmetry, and transitivity.

Reflexivity: For any x in D, we need to check if xRx holds true.

Reordering the bits of x in any way will still result in x itself. Therefore, xRx holds true for all x in D.

Symmetry: For any x and y in D, if xRy holds true, then yRx should also hold true.

Reordering the bits of x to obtain y and then reordering the bits of y will still result in x. Thus, if xRy is true, yRx is also true.

Transitivity: For any x, y, and z in D, if xRy and yRz hold true, then xRz should also hold true.

If we can obtain y from x by reordering the bits and obtain z from y by reordering the bits, we can combine the two reorderings to obtain z from x. Therefore, if xRy and yRz are true, xRz is also true.

Since the relation R satisfies all three conditions (reflexivity, symmetry, and transitivity), we can conclude that R is an equivalence relation.

In summary:

Relation R in part (a) is an equivalence relation.

Relation R in part (b) is also an equivalence relation.

Learn more about reflexivity here: brainly.com/question/32388306

#SPJ11

A force of -14j N is applied to a particle located at the position vector r⃗ = (8i^ + 5j^) m.

The given information states that a force vector F⃗ is exerted on a particle. The force vector is represented as F⃗ = -14j^ N, where -14 indicates the magnitude of the force and j^ represents the unit vector along the y-axis. Additionally, the particle is located at the position vector r⃗ = (8i^ + 5j^) m, where 8i^ represents the position along the x-axis and 5j^ represents the position along the y-axis.

The negative sign in the force vector indicates that the force is directed opposite to the y-axis, which means it is acting downward. The magnitude of the force is 14 N. The position vector indicates that the particle is located at the position (8, 5) in terms of Cartesian coordinates. The i^ and j^ components represent the x and y directions, respectively. Combining these pieces of information, we can conclude that a force of -14 N is applied in the downward direction to a particle located at the coordinates (8, 5) in the x-y plane.

Learn more about y-axis here: https://brainly.com/question/30901684

#SPJ11

The shear stress acting along the seam is 159.94 kPa.

We need to determine shear stress acting along the seam.

First, we are going to determine horizontal stress components at 0°. Then, using transformation formulas.

To find stress along the inclined seam.

We need to determine the cross-sectional area of the tube so we can calculate stress components.

A = π [tex](100/2)^{2}[/tex] -  [tex](100-4/2)^{2}[/tex]

= 615.8 [tex]mm^{2}[/tex]

= 6.16 * [tex]10^{-4} m^{2}[/tex]

Since the tube is only subjected to horizontal compressive force P at 0° there is only a normal stress component σ_x.

σ_x = P/A

​ σ_x = -200/6.16 * [tex]10^{-4}[/tex]

= -324806 Pa

Now we can apply the transformation formula for the shear stress component (9-2).

[tex]T_{x'}_{y'}[/tex] = - σ_x -  σ_y/2 sin 2θ + [tex]T_{xy}[/tex] cos 2θ

[tex]T_{x'}_{y'}[/tex] = -( -324806 -0/2) sin(2 * 40°) + 0 * cos(2 * 40°)

= 159936 Pa

≈ 159.94 kPa

Therefore [tex]T_{x'}_{y'}[/tex] = 159.94 kPa.

The Question was Incomplete, Find the full content below:

A paper tube is formed by rolling a cardboard strip in a spiral and then gluing the edges together as shown. Determine the shear stress acting along the seam, which is at 40° from the vertical when the tube is subjected to an axial compressive force of 200 N. The paper is 2mm thick and the tube has an outer diameter of 100 mm.

know more about shear stress here:

https://brainly.com/question/30407832

#SPJ11

A linearly independent system of vectors v1, v2, ..., vn in a vector space v is a basis if and only if the number of vectors, n, is equal to the dimension of v.

To prove that a linearly independent system of vectors v1, v2, ..., vn in a vector space v is a basis if and only if n = dim v, we need to show both directions of the statement.

If the system of vectors is a basis, then n = dim v:

Suppose the system of vectors v1, v2, ..., vn is a basis for the vector space v.

By definition, a basis spans the entire vector space, which means every vector in v can be written as a linear combination of v1, v2, ..., vn.

Since the system is a basis, it must also be linearly independent, which implies that no vector in the system can be expressed as a linear combination of the other vectors.

Thus, the number of vectors in the system, n, is equal to the dimension of the vector space v, denoted as dim v.

If n = dim v, then the system of vectors is a basis:

Suppose n = dim v, where n is the number of vectors in the system and dim v is the dimension of the vector space v.

Since dim v is defined as the maximum number of linearly independent vectors that can form a basis for v, we know that any system of n linearly independent vectors in v will be a basis for v.

Therefore, the system of vectors v1, v2, ..., vn is a basis for the vector space v.

Combining both directions of the proof establishes that a linearly independent system of vectors v1, v2, ..., vn in a vector space v is a basis if and only if n = dim v.

For more questions like Vector click the link below:

https://brainly.com/question/29740341

#SPJ11

The piecewise function to represent the amount A Sam owes after m months is A ( m ) = { 1500 - 50 m, if 0 ≤ m ≤ 12

{ 1500 - 50 (12) - 75 (m - 12), if m > 12

For the initial twelve months (0 ≤ m ≤ 12), Sam pays a monthly installment of $50. As a result, his remaining debt after m months will be equal to the starting loan amount ($ 1500) reduced by the cumulative total that he had paid back during said year ($50 x m).

Beyond the first year (m > 12), Sam is liable for a payment of $75 each month. Having already satisfied the former fee of $50 per month over the course of a full calendar year, his indebtedness afterwards becomes the remaining balance post-first year ( $1500 - 50 ( 12 )) decreased by his collective cost at $75 per month since then ( $75 x ( m - 12 )).

The piecewise function is therefore:

A ( m ) = { 1500 - 50 m, if 0 ≤ m ≤ 12

{ 1500 - 50 (12) - 75 (m - 12), if m > 12

Find out more on piecewise functions at https://brainly.com/question/28610599

#SPJ1

The predicted Durante humor score for an individual with an IQ score of 110 is 178.

Based on the information given, we know that there is a strong, positive, linear relationship between an individual's IQ score and their sense of humor. Additionally, the psychologist has found a correlation coefficient of 0.81 between the two variables.
To predict the Durante humor score of an individual with an IQ score of 110, we can use the formula for a simple linear regression:
y = b0 + b1x
where y is the predicted Durante humor score, x is the IQ score, b0 is the intercept, and b1 is the slope of the regression line.
To find the intercept and slope, we need to use the sample means and standard deviations provided:
b1 = r * (Sy / Sx)
where r is the correlation coefficient and Sy and Sx are the standard deviations of the Durante humor scores and IQ scores, respectively.
b0 = ybar - b1 * xbar
where ybar and xbar are the sample means of the Durante humor scores and IQ scores, respectively.
Plugging in the values, we get:
b1 = 0.81 * (24 / 12) = 1.62
b0 = 140 - 1.62 * 105 = -3.1
Now we can use these values to predict the Durante humor score of an individual with an IQ score of 110:
y = -3.1 + 1.62 * 110 = 177.9
Therefore, the predicted Durante humor score for an individual with an IQ score of 110 is 178.

learn more about Durante's humor score:https://brainly.com/question/4420048

#SPJ11

Given that a soccer team has 12 players. It is known that only 6 players are allowed on the field at a time. How many different groups of players can be on the field at a time?To determine the number of different groups of players that can be on the field at a time, we need to apply combination formula because the order does not matter when choosing the 6 players from the total of 12 players.

The formula for combination is given by:[tex]C(n, r) = \frac{n!}{r!(n - r)!}[/tex] where C is the number of combinations possible, n is the total number of items, and r is the number of items being chosen.Using the combination formula to calculate the number of different groups of players that can be on the field at a time[tex]C(12, 6) = \frac{12!}{6!(12 - 6)!}$$$$C(12, 6) = \frac{12!}{6!6!}$$$$C(12, 6) = \frac{12 × 11 × 10 × 9 × 8 × 7}{6 × 5 × 4 × 3 × 2 × 1 × 6 × 5 × 4 × 3 × 2 × 1}$$$$C(12, 6) = 924[/tex]

Therefore, there are 924 different groups of players that can be on the field at a time.

To know more about soccer team,visit

https://brainly.com/question/13630543

#SPJ11

Answer:Answer:The equation that could be used to determine the length of each of the four pieces of wood he cut is 3.5 = 0.6 + 4x and the solution is x = 0.725

Part A: Write an equation that could be used to determine the length of each of the four pieces of wood he cut.

Represent the length of the four pieces with x

So, the given parameters are:

Initial length = 3.5 feet

Remaining length = 0.6 feet

Number of pieces = 4

The equation that could be used to determine the length of each of the four pieces of wood he cut is represented as:

Initial length = Remaining length + Number of pieces * x

This gives

3.5 = 0.6 + 4x

Hence, the equation that could be used to determine the length of each of the four pieces of wood he cut is 3.5 = 0.6 + 4x

Part B: Explain how you know the equation from Part A is correct.

The equation in part (A) is correct because it can be used to determine the length of each of the four pieces of wood he cut

Part C: Solve the equation from Part A.

In part A, we have:

3.5 = 0.6 + 4x

Subtract 0.6 from both sides

2.9 = 4x

Divide both sides by 4

x = 0.725

Hence, the solution is x = 0.725

Step-by-step explanation:

Hope I helped ;)

To test for the significance of the coefficient on aggregate price index, we need to calculate the p-value.

The p-value is the probability of obtaining a result as extreme or more extreme than the one observed, assuming that the null hypothesis is true.

In this case, the null hypothesis would be that there is no relationship between the aggregate price index and the variable being studied. We can use statistical software or tables to determine the p-value.

Generally, if the p-value is less than 0.05, we can reject the null hypothesis and conclude that there is a significant relationship between the aggregate price index and the variable being studied. If the p-value is greater than 0.05, we cannot reject the null hypothesis.

Learn more about p-value at

https://brainly.com/question/30461126

#SPJ11

The variance of the distribution of the data set is 0.596.

To find the variance of a discrete probability distribution, we use the formula:

Var(X) = ∑[x - E(X)]² p(x),

where E(X) is the expected value of X, which is equal to the mean of the distribution, and p(x) is the probability of X taking the value x.

We can first find the expected value of X:

E(X) = ∑x . p(x)

= 0 (0.130) + 1 (0.346) + 2 (0.346) + 3 (0.154) + 4 (0.024)

= 1.596

Next, we can calculate the variance:

Var(X) = ∑[x - E(X)]² × p(x)

= (0 - 1.54)² × 0.130 + (1 - 1.54)² ×  0.346 + (2 - 1.54)² × 0.346 + (3 - 1.54)² ×  0.154 + (4 - 1.54)² × 0.024

= 0.95592

Therefore, the variance of the distribution is 0.96.

To learn more about the variance;

https://brainly.com/question/16686665

#SPJ1

(a)  The cumulative distribution function F(t) = 0 for t<0, F(t) = t/a for 0<=t<=a, and F(t) = 1 for t>a.

(b)  The reliability function R(t) = 1 for t<0, R(t) = 1-t/a for 0<=t<=a, and R(t) = 0 for t>a.

(c) The hazard rate h(t) = 1/t for 0<t<=a, and the failure rate is decreasing.

(d)  The mean time to failure MTTF = a/2 and tmedian = a/2.

(e) p(T > a) = 0 and the uniform distribution does not have the memoryless property.

(a) The cumulative distribution function (CDF) for a uniform distribution over (0,a] is given by:

F(t) = P(T ≤ t) =

{ 0 if t < 0,

{ t/a if 0 ≤ t ≤ a,

{ 1 if t > a.

(b) The reliability function is defined as R(t) = 1 - F(t).

Therefore, for the uniform distribution over (0,a], we have:

R(t) =

{ 1 if t < 0,

{ 1 - t/a if 0 ≤ t ≤ a,

{ 0 if t > a.

(c) The hazard rate h(t) is defined as the instantaneous rate of failure at time t, given that the system has survived up to time t.

It is given by:

h(t) = f(t) / R(t),

where f(t) is the probability density function (PDF) of the distribution.

For the uniform distribution over (0,a], the PDF is constant over the interval (0,a], and zero elsewhere:

f(t) =

{ 1/a if 0 < t ≤ a,

{ 0 otherwise.

Therefore, we have:

h(t) =

{ 1/t if 0 < t ≤ a,

{ undefined if t ≤ 0 or t > a.

Since the hazard rate is decreasing with time, the failure rate is also decreasing.

This means that the system is more likely to fail early on than later on.

(d) The mean time to failure (MTTF) is given by:

MTTF = ∫₀ᵃ t f(t) dt = ∫₀ᵃ t/a dt = a/2.

The median time to failure (tmedian) is the time t such that F(t) = 0.5. Since F(t) is a linear function over the interval (0,a], we have:

tmedian = a/2.

(e) The probability that T > a is zero, since the uniform distribution is defined over the interval (0,a]. Therefore, p(T > a) = 0.

The uniform distribution does not have the memoryless property, which states that the probability of failure in the next time interval depends only on the length of the interval and not on how long the system has already been operating.

The uniform distribution is not memoryless because as time passes, the probability of failure increases, unlike in a memoryless distribution where the probability of failure remains constant over time.

For similar question on cumulative distribution function.

https://brainly.com/question/17074573

#SPJ11

Based on the given information that AD = DC = AC = a, we can conclude that the triangle is a 30-60-90 right triangle.

To prove that the triangle is a 30-60-90 right triangle, we can use the properties of this specific triangle.

In a 30-60-90 triangle, the sides are in a specific ratio. Let's denote the length of the shortest side as "a". Then the other sides can be determined as follows:

The length of the side opposite the 30-degree angle is "a".

The length of the side opposite the 60-degree angle is "a√3".

The length of the hypotenuse (the longest side) is "2a".

Given that AD = DC = AC = a, we can conclude that the triangle is indeed a 30-60-90 right triangle.

To know more about right triangle:

https://brainly.com/question/3770177

#SPJ4

--The given question is incomplete, the complete question is given below " Prove 30 - 60 - 90 Right Triangle

using the given data from the figure, the indicated length of the sides of the triangle

AD= DC= AC= a"--

The length of side a is determined as 13.92 by applying sine rule of triangle.

The length of side a is calculated by applying the following formulas shown below;

Apply sine rule as follows;

a / sin (83) = 13 / sin (68)

Simplify the expression as follows;

multiply both sides of the equation by " sin (83)".

a = ( sin (83) / sin (68) ) x 13

a = 13.92

Thus, the value of side length a is determined as 13.92 by applying sine rule as shown above.

Learn more about sine rule here: https://brainly.com/question/20839703

#SPJ1

7/13 as a decimal to the hundredths place is 0.54 and the remainder as a fraction is 7/13.

7/13 as a decimal to the hundredths place and the remainder as a fraction

In order to convert 7/13 to a decimal, we will divide 7 by 13.

Using long division, we get7 ÷ 13 = 0.53846153846...To the nearest hundredth, we round up to 0.54.

Hence, 7/13 as a decimal to the hundredths place is 0.54.

To find the remainder as a fraction, we subtract the product of the quotient and divisor from the dividend. Then, we simplify the fraction as much as possible.

Remainder = Dividend - Quotient x DivisorRemainder = 7 - 0 x 13

Remainder = 7/13

Therefore, 7/13 as a decimal to the hundredths place is 0.54 and the remainder as a fraction is 7/13.

To know more about fraction visit:

https://brainly.com/question/10354322

#SPJ11

Answer:

see explanation

Step-by-step explanation:

180° on the line is a straight angle

Two medical technologies that have helped to combat the spread of diseases in cities include:

Artificial intelligence

Telemedicine

There are different forms of medical technology that have helped in combatting diseases in cities. Some of these include artificial intelligence and telemedicine. Artificial intelligence has helped to combat diseases because the medical records of patients can be easily tracked and used in suggesting diagnoses to medical doctors.

Telemedicine has also helped as technological devices are used to deliver healthcare services in a fast and efficient manner.

Learn more about medical technologies here:

https://brainly.com/question/27709980

#SPJ4

The coefficient of x^3 in the Taylor series for f(x) is 0, since there is no term involving x^3.

To find the Taylor series of the function f(x) = 1/(2x) about x = 0, we can use the formula:

[tex]f(x) = f(0) + f'(0)x + (1/2!)f''(0)x^2 + (1/3!)f'''(0)x^3 + ...[/tex]

where f'(x), f''(x), f'''(x), etc. denote the derivatives of f(x).

First, we need to find the derivatives of f(x):

f'(x) = -1/(2x^2)

f''(x) = 2/(x^3)

f'''(x) = -6/(x^4)

f''''(x) = 24/(x^5)

Next, we evaluate these derivatives at x = 0 to get:

f(0) = 1/(2(0)) = undefined

f'(0) = -1/(2(0)^2) = undefined

f''(0) = 2/(0)^3 = undefined

f'''(0) = -6/(0)^4 = undefined

f''''(0) = 24/(0)^5 = undefined

Since the derivatives are undefined at x = 0, we need to use a different method to find the Taylor series. We can use the identity:

1/(1 - t) = 1 + t + t^2 + t^3 + ...

where |t| < 1.

Substituting t = -x^2/a^2, we get:

1/(1 + x^2/a^2) = 1 - x^2/a^2 + x^4/a^4 - x^6/a^6 + ...

This is the Taylor series for 1/(1 + x^2/a^2) about x = 0. To get the Taylor series for f(x) = 1/(2x), we need to replace x with ax^2:

f(x) = 1/(2(ax^2)) = 1/(2a) * 1/(1 + x^2/a^2)

Substituting the Taylor series for 1/(1 + x^2/a^2), we get:

f(x) = 1/(2a) - x^2/(2a^3) + x^4/(2a^5) - x^6/(2a^7) + ...

Therefore, the coefficient of x^3 in the Taylor series for f(x) is 0, since there is no term involving x^3.

Learn more about Taylor series here:

https://brainly.com/question/29733106

#SPJ11

The question is given as: If a test of the model shows that it holds 8,000 ounces, will the bridge hold 1 ton? 8,000 ounces on the model is equal to _ ounces on the actual bridge. Convert ounces to pounds. The actual bridge can hold _ pounds. Therefore, the bridge will/will not hold 1 ton.

In order to answer the question, let's first convert the 8,000 ounces to pounds as follows: 1 pound = 16 ounces. Therefore, 1 ounce = 1/16 pounds.

Now, 8,000 ounces = 8,000/16 = 500 pounds8,000 ounces on the model is equal to 500 pounds on the actual bridge.

Now, let's find out how many pounds one ton is: 1 ton = 2,000 pounds.

Therefore, the actual bridge can hold 2,000 pounds.

Thus, since 2,000 pounds is greater than 500 pounds, the bridge will hold 1 ton.

To know more about ton visit:

https://brainly.com/question/29851296

#SPJ11

Answer:

62

Step-by-step explanation:

The equation of the linear function is f(x) = 20x - 150.

To find the equation of the linear function, we need to find the slope and the y-intercept.

Using the given points, we can find the slope:

slope = (f(9) - f(6)) / (9 - 6) = (30 - (-30)) / 3 = 20

Now, to find the y-intercept, we can use one of the points. Let's use (6, -30):

y - y1 = m(x - x1)

y - (-30) = 20(x - 6)

y + 30 = 20x - 120

y = 20x - 150

Therefore, the equation of the linear function is f(x) = 20x - 150.

Learn more about linear function here

https://brainly.com/question/2248255

#SPJ11

Answer:

152 miles away

Step-by-step explanation:

i dont have an explanation srry