Answerquit
Explanation:snns
List the two pairs of atoms referred to in the
previous question in order of increasing ionic
character of the bonding between them.
The Sulphate of x is XSO4 valency of x is
Answer: m mm
/lk ac
Explanation:
this is already solved but i would appreciate if someone check for me. thank you !
Name the following aromatic hydrocarbon:
Explanation:
I think option 3..............
HCl + Fe?ra gì hihihihi
Answer:
fecl2+ h2
Explanation:
7. You have 1.5x1024 atoms of iron. How many moles do you have?
Answer:
2.49moles
Explanation:
To calculate the number of moles (n), of iron (Fe) in 1.5 × 10²⁴ atoms, we divide the number of atoms by Avogadro's number (6.02 × 10²³).
That is, n = N ÷ nA
Where;
n = number of moles (mol)
N = number of atoms
nA = Avogadro's constant
n = 1.5 × 10²⁴ ÷ 6.02 × 10²³
n = 1.5/6.02 × 10(²⁴ - ²³)
n = 0.249 × 10¹
n = 2.49moles
Which reaction occurs at the cathode of a galvanic cell that has an aluminum electrode in an electrolyte with aluminum ions and copper electrode in an electrolyte with copper ions ? The reduction potential for the reduction of Cu^ 2+ = 0.34 The reduction potential for the reduction of AP^ 3+ =-1.68V.
Answer:
[tex]{ \bf{Cu {}^{2 + } + 2e \: → \: Cu }}[/tex]
The reaction that occurs at the cathode of a given galvanic cell is:
Cu²⁺ + 2e⁻ → Cu
What is Galvanic Cell?A galvanic cell can be defined as an electrochemical cell that converts the chemical energy of spontaneous redox reactions into electrical energy. The galvanic cell makes use of chemical reactions to generate electrical energy.
A galvanic cell consists of two half-cells and a salt bridge. Each half-cell further contains an electrode dipped into an electrolyte. When both electrodes are dipped in the same electrolyte, then there is no need for a salt bridge.
At the anode, an oxidation reaction occurs at this electrode. At the cathode, reduction occurs at this electrode. The anode has a negative potential with respect to the solution while the cathode has a positive potential with respect to the solution.
As in the question, the reduction of Cu²⁺ has a positive reduction potential. Therefore, the reduction of the copper will occur at the cathode.
Learn more about Galvanic cell, here:
https://brainly.com/question/13031093
#SPJ5
rank the intermolecular forces from weakest to strongest. Dipole-induced dipole, London dispersion, hydrogen bond, dipole-dipole
Answer:
London dispersion,hydrogen bond, dipole-dipole,dipole-induced dipole.
Explanation:
London dispersion < hydrogen bond < dipole-dipole < dipole-induced dipole.
What are intermolecular forces?Intermolecular forces are the forces which mediate an interaction between molecules, including forces of attraction or repulsion which act between molecules and other types of neighbouring particles.
The London dispersion force is a temporary attractive force that occurs when the electrons in two adjacent atoms make atoms form temporary dipoles.
A hydrogen bond is an intermolecular force that occurs with a special type of dipole-dipole attraction.
Dipole-dipole forces are the forces between the positive side of one polar molecule and the negative side of another polar molecule.
A dipole-induced dipole attraction is a weak attraction that occurs when a polar molecule produces a dipole in an atom or in a nonpolar molecule by arranging of electrons in the nonpolar species.
Hence intermolecular forces from weakest to strongest are:
London dispersion < hydrogen bond < dipole-dipole < dipole-induced dipole.
Learn more about intermolecular forces here:
https://brainly.com/question/17111432
#SPJ5
CH3COOH
a. What is hydrated water?
1
b. How sodium hydrogen carbonate blow up
cake?
2
c. Explain the cause of saying that the reaction no. (ii) is a
hydrolysis reaction.
3
d.) Is the reaction no. (i) said a redox reaction and a
substitution reaction simultaneously? Analyze with
equations.
4
Answer:
the water which are very healthy is known as hydrated water
The osmotic pressure of a solution formed by dissolving 0.231 g of the protein in 150 mL of water at 298 K is found to be 2.054 torr.
Answer:
13924g/mol is the molar mass of the protein
Explanation:
What is the molar mass of the protein.
The osmotic pressure of a solution, π, is defined as:
π = c*R*T
Where π is osmotic pressure = 2.054torr* (1atm/760torr) = 2.70x10⁻³atm
c is molar concentration of the protein,
R is gas constant = 0.082atmL/molK
And T is absolute temperature = 298K
Solving the molar concentration:
c = π / RT
c = 2.70x10⁻³atm / 0.082atmL/molK*298K
c = 1.106x10⁻⁴ moles protein / L
The moles of protein in 150mL = 0.150L:
0150L * (1.106x10⁻⁴ moles protein / L) = 1.659x10⁻⁵ moles protein
The molar mass is the ratio of mass and moles:
0.231g / 1.659x10⁻⁵ moles protein =
13924g/mol is the molar mass of the proteinA student is investigating the effect of concentration on the colour of a solution of copper sulfate.She wished to make up 250cm^3 of a solution if copper sulfate with a concentration of 0.5 mol/dm^3 that she can dilute. a solution with the concentration of 0.50 mol/dm^3 contains 0.50 mol of copper sulfate per decimetre cubed calculate the concentration of this solutionin g/dm^3
Answer:
79.8g/dm³
Explanation:
As you can see, the solution in the problem contains 0.5 moles of copper sulfate per dm³. To solve this question we must convert these moles to grams using its molar mass (Molar mass CuSO4 = 159.609g/mol) as follows:
0.5mol CuSO4/dm³ * (159.609g/mol) =
79.8g/dm³what mass of water will be formed when 3g of hydrogen react with 30g of oxygen?
Answer: Write down the chemical equation first;
2H2 + O2 —-> 2H2O
2. Since the mass is given, use it to calculate the mole for each reactant;
mole = mass / molar mass
mole of H2 : 8/2 = 4 mole
mole of O2 : 30/16(2) = 0.9375 mole
Now, if you're not sure which reactant to use to calculate the mass of H2O using ratio since both answer are different, find the limiting reactant.
From the equation;
2 mol of H2 -> 2 mol of H2O
4 mol of H2 -> (4*2)/2 = 4 mol of H20
______________________________________
1 mol of O2 -> 2 mol of H2O
0.9375 mol of O2 -> (0.9375*2)/1 = 1.875 mol of H2O
Let's take a look at both numbers. Since H2 produces more water than O2, O2 will be the limiting reactant as it has the least mole of H2O. So now we are going to use O2 as our limiting reactant. Use the formula to calculate mass of water using mole.
mass of H2O : 1.875*(16+2) = 33.75 g
Thats it. Correct me if im wrong
Explanation:
What is the pOH of a 1 x 10^-8 M solution of HNO3?
Explanation:
to find POH u need PH first
so ph=-log(h3o)
so
[tex]ph = - log(1 \times {10}^{ - 8} ) \\ \\ ph = 8 \\ ph + poh =14 \\ poh = 14 - 8 \\ poh = 6[/tex]
3 Cu + 8HNO3 → 3 Cu(NO3)2 + 2 NO + 4 H2O
In the above equation, how many grams of water can be made when 15.9 moles of HNO3 are consumed?
Answer:
45673
Explanation:
Use the periodic table to determine the electron configuration for aluminum (AI) and arsenic (As) in
noble-gas notation
AL
o [Ar]3s23p!
lo (He]2s22p63s23p!
0 [Ne]3s23p!
0 [Ne]3s23p2
DONE
Answer:
Aluminum; [Ne]3s²3p¹
Arsenic; [Ar]3d¹⁰4s²4p³
Explanation:
Aluminum
From the periodic table, we have that aluminum, Al, is located in period 3, and group 3A of the periodic table
Therefore, the noble gas that comes before aluminum in the periodic table is neon Ne
The electronic configuration of aluminum is 1s²2s²2p⁶3s²3p¹
The electronic configuration of neon is 1s²2s²2p⁶
Therefore, the electronic configuration of aluminum in noble gas notation (Ne) is therefore;
[Ne]3s²3p¹
Arsenic
Arsenic is located after argon, Ar on the periodic table
The electronic configuration of arsenic is 1s²2s²2p⁶3s²3p⁶4s²3d¹⁰4p³
The electronic configuration of argon is 1s²2s²2p⁶3s²3p⁶
The electronic configuration of arsenic in noble gas notation (Ar) is given as follows;
[Ar]3d¹⁰4s²4p³
Physical properties can be divided into two categories. _______ depend on the amount of matter present, while _______ don't.
how many different sublevels are in the second energy level?
2
1
4
3
Answer:
The answer is 2
Explanation:
There are two energy sublevels in the second principal energy level. These two energy sublevels are 2s and 2p. The energy distribution in an atom is divided into a number of principal energy levels, and the principal energy levels are again divided into four basic energy sublevels.
A se ion has a mass number of 77
and a charge of −2
. Determine the number of neutrons, protons, and electrons in this ion.
Answer: The number of protons are 34, number of neutrons are 43 and number of electrons are 36 in the given Se ion
Explanation:
The atom consists of 3 subatomic particles:
Protons: They are positively charged particles present in the nucleus of an atom.Electrons: They are negatively charged particles present in the orbits around the nucleus of an atom.Neutrons: They are neutral particles present in the nucleus of an atom.The mass number is the sum of the number of protons and number of neutrons in the nucleus of an atom. These are known as nucleons
The atomic number is defined as the number of electrons or number of protons present in an atom.
We are given:
A Se ion having mass number 77
Atomic number of Se = 34
Number of protons = 34
Number of neutrons = 77 - 34 = 43
Number of electrons = Atomic number - Charge
Charge = -2
Number of electrons = [34 - (-2)] = [34 + 2] = 36
Hence, the number of protons are 34, number of neutrons are 43 and number of electrons are 36 in the given Se ion
Which of the following is true of science?
O It can be disproven by philosophy and religion.
O It does not change after new evidence is discovered.
O It is based on the personal opinions of scientists.
O It is based on testable and replicable evidence.
Answer:
I know the other person already said this but it would be the last option : )
Which coefficients correctly balance the formula equation below?
AgNO3 + CuCl2 → AgCl + Cu(NO3)2
2, 1, 2,1
1, 1, 3,1
2, 2, 3,1
2, 1, 1,2
Answer:
2, 1, 2,1
Explanation:
The chemical equation of the reaction given in this question is as follows:
AgNO3 + CuCl2 → AgCl + Cu(NO3)2
The reaction is between silver nitrate (AgNO3) and copper (I) chloride (CuCl2) to form silver chloride (AgCl) and copper nitrate (Cu(NO3)2.
However, this above equation is not BALANCED because the number of atoms of each element on both sides of the equation does not equate i.e. are not the same. To balance the equation, we have to make use of COEFFICIENTS, which are numbers used in front of each element in order to balance the equation.
The balanced equation is as follows:
2AgNO3 + CuCl2 → 2AgCl + Cu(NO3)2
From the above balanced equation, we can observe that coefficients used to balance the equation is in the order: 2, 1, 2,1
How much heat must be transferred to 1600 g of iron to change the iron's
temperature from 202°C to 214°C? (The specific heat capacity of iron is
0.450 J/g.°c.)
O A. 8600 J
O B. 3.4 J
O C. 300
O D. 60 J
Answer:
A. 8600 J
General Formulas and Concepts:
Thermochemistry
Specific Heat Formula: q = mcΔT
q is heat (in J)m is mass (in g)c is specific heat (in J/g °C)ΔT is change in temperature (in °C)Explanation:
Step 1: Define
[Given] m = 1600 g
[Given] ΔT = 214 °C - 202 °C = 12 °C
[Given] c = 0.450 J/g °C
[Solve] q
Step 2: Find Heat
Substitute in variables [Specific Heat Formula]: q = (1600 g)(0.450 J/g °C)(12 °C)Multiply [Cancel out units]: q = (720 J/°C)(12 °C)Multiply [Cancel out units]: q = 8640 JStep 3: Check
Follow sig fig rules and round. We are given 2 sig figs as our lowest.
8640 J ≈ 8600 J
Topic: AP Chemistry
Unit: Thermodynamics
Help me with this question
Define a unit? write it's type
Answer:
Unit is the standard assigned to measure physical quantity. ... Length, mass, time, temperature, luminous intensity, and the electric current are known as the fundamental quantities. These are represented by L, M, T, 0, Cd, and A respectively
OAmalOHopeO
How would the equilibrium of the reaction below be affected if the temperature decreased?
Answer:
A. More O2, SO2, and SO3 would be produced.
Explanation:
set goals and objectives for a company
Explanation:
Objectives and goals serve as a foundation for successful organizations since they establish the business's objective and aid in the identification of required measures. Goals are broad assertions of what you want to achieve, whereas goals are the precise stages or steps you need to take to get there.
What is the biggest earthquake danger to the people inside a building ?
Answer:
Most of the hazards to people come from man-made structures themselves and the shaking they receive from the earthquake. The real dangers to people are being crushed in a collapsing building, drowning in a flood caused by a broken dam or levee, getting buried under a landslide, or being burned in a fire.
Hope this helps :> <3
Es para hoy, ayuda por favor
Answer: it)s not letting me download it edit it a d re send it
Explanation:
what type of chemical is manganese(IV) oxide
Answer:
catalyst
Explanation:
it alters the speed of reaction
What is pH?
O A. A measurement indicating how acidic a solution is
B. A concentration of total ions dissolved in solution
C. A level of dissolved gases that are in solution
O D. A component of solutions that makes them acidic
Answer:
Awnser is A
Explanation:
Answer:
Hello There!!
Explanation:
The answer is↬O A. A measurement indicating how acidic a solution is.
hope this helps,have a great day!!
~Pinky~
Gatorade has the conductivity of 3296 µS, Powerade has 4502 µS, and Vitamin Water is 657 µS. What does this data tell you about the dissolved ions in these solutions?
Answer:
Powerade has the most dissolved ions, followed by Gatorade and lastly vitamin water
Explanation:
How conductive a certain solution is, is based on the kind of ions that are present or dissolved in the solution. Hence, we have it that, the higher the concentration of the ions that are present in a solution, the better it will conduct.
There is thus, a direct relationship between what is dissolved or the kind of present ions and how conductive the solution is.
A solution with more dissolved ions is a better conductor of electricity and thus has a conductivity value that is higher
Thus, we can conclude that Powerade has more dissolved ions, Gatorade has less and Vitamin water has the least
A cart accelerating slower when mass was increased.
1st Law - 3rd Law
Answer:
Newton's second law
Explanation:
It is mentioning acceleration and mass
Newton's second law's equation = F = m*a
Hope u understood
Please mark brainliest
Thank You