four working ladies a,b c,d are sitting around a table
1) a sits opposite to cook
2.b sits on the right side of the beautician
3.teacher is on the left side of an accountant
4.d sits opposite to c
5.c is to the right of the accountant
​

Answer:

Explanation:

The situation being described completely fails in regard to the importance of metrology. This is because the main importance of metrology is making sure that all of the measurements in a process are as accurate as possible. This accuracy allows an entire process to function efficiently and without errors. In a food production plant, each individual department of the plant relies on the previous function to have completed their job with the correct and accurate instructions so that they can fulfill their functions correctly and end up with a perfect product. If the oven (like in this scenario) is a couple of degrees off it can cause the product to come out burned or undercooked, which will then get transferred to the next part of production which will also fail due to the failed input (burned or undercooked product). This will ultimately lead to an unusable product at the end of the process and money wasted. Which in a large production plant means thousands of products in a single batch are thrown away.

In terms of the necessity of metrology, the situation stated absolutely fails. This is because metrology's primary goal is to ensure that all measurements in a process are as precise as feasible. This precision allows a whole process to run smoothly and error-free. If the oven temperature is wrong by a few degrees, the product will come out charred or undercooked, and the product will be sent to the next step of the process, which will also fail owing to the failed input. This will result in a useless product and a waste of money at the end of the procedure. In a big manufacturing facility, this means thousands of goods are discarded in a single batch.

Answer:

fggffgethjbdxvgrsbjb you are my world I see the attached resume

Answer:

It's indeed safer to suggest a 150 VA transformer. Following table however is the clarification given.

Explanation:

For 2 motors with 0.1 A, the Power will be:

P = [tex]2\times 120\times 0.1[/tex]

  = [tex]24 \ W[/tex]

For 4 motors with 0.18 A, the Power will be:

P = [tex]4\times 120\times 0.18[/tex]

  = [tex]86.4 \ W[/tex]

As we know, for 6 pilot lamps, the power is "5 W".

So,

The total power will be:

⇒ P = [tex]24+86.4+5[/tex]

       = [tex]115.4 \ W[/tex]

Now,

Consider the power factor to be "0.95"

VA of transformer is:

= [tex]PF\times Power[/tex]

= [tex]115.4\times 0.9[/tex]

= [tex]109.63 \ VA[/tex]

Answer:

The answer is "7.73 kip-ft".

Explanation:

Using this equation, calculate the polar moment of shaft inertia:

[tex]J= \frac{\pi }{32} d^4\\\\[/tex]

  [tex]= \frac{\pi}{ 32} \times 6^4\\\\= 127.234 \ \ in^4[/tex]

Equate the number of moments in x:

[tex]\sum M_x =0[/tex]

[tex]\to T_A-T_B +T_C+T_D =0\\\\\to T_A-40 +20+T_D =0[/tex]

Calculate the torsional response at A using the superposition method:

[tex]\to \phi_A =(\phi_A)_{T} - (\phi_A)_{T_A}\\\\[/tex]

         [tex]= \frac{T_B L_{BC}}{JG}+ \frac{T_C L_{CD}}{JG} - \frac{T_A L_{AD}}{JG}\\\\[/tex]

[tex]0.05= \frac{40 \times 12 \times 2 \times 12}{127.234 \times 11 \times 10^3}+ \frac{20 \times 12 \times 1.5 \times 12 }{127.234 \times 11 \times 10^3} - \frac{T_A \times 12 \times 5 \times 12}{127.234 \times 11 \times 10^3}[/tex]

[tex]0.05= (8.22 \times 10^{-3})+ (3.086 \times 10^{-3})- (5.14 \times 10^{-4} \ T_A)\\\\[/tex]

[tex]\to T_A =12.27 kip \ ft \\\\[/tex]

The torsional answer in help A is  12.27 kip- ft.  It replace the necessary equation values:

[tex]\to T_A-40 +20+T_D =0 \\\\\to 12.27-40+20+T_D=0\\\\T_D=7.73 kip \ ft[/tex]

The torsional reactions at the given supports are;

T_a = 12.3 Kip.ft and T_d = 7.7 Kip.ft

From the image of the shaft attached, if we take a free body diagram and torsion about x, we will have;

∑Mₓ = 0;

T_a + T_d + 20 - 40 = 0     -----(1)

Using the method of superposition, we have;

Φ_a = (Φ_a)_T - (Φ_a)_T_a

Formula for rotation Φ is;

Φ = TL/(JG)

Thus;

0.005 = [tex][\frac{40 * 12 * 2 * 12}{(\pi/2) *3^{4} * 11 * 10^{3}} + \frac{20 * 12 * 1.5 * 12}{(\pi/2) *3^{4} * 11 * 10^{3}}] - \frac{T_{A} * 12 * 5 * 12}{(\pi/2) *3^{4} * 11 * 10^{3}}[/tex]

Solving for T_a in this gives;

T_a = 12.3 Kip.ft

Thus, from eq 1;

12.3 + T_d + 20 - 40 = 0

T_d = 20 - 12.3

T_d = 7.7 Kip.ft

Read more about Torsional reactions from torque at; https://brainly.com/question/20691242

Answer:

Hello your question is incomplete attached below is the missing part and answer

options :

Effect A

Effect B

Effect C

Effect D

Effect AB

Effect AC

Effect AD

Effect BC

Effect BD

Effect CD

Answer :

A  = significant

 B  = significant

C  = Non-significant

D  = Non-significant

AB  = Non-significant

AC  = significant

AD  = Non-significant

BC  = Non-significant

 BD  = Non-significant

 CD = Non-significant

Explanation:

The dependent variable here is Time

Effect of A  = significant

Effect of B  = significant

Effect of C  = Non-significant

Effect of D  = Non-significant

Effect of AB  = Non-significant

Effect of AC  = significant

Effect of AD  = Non-significant

Effect of BC  = Non-significant

Effect of BD  = Non-significant

Effect of CD = Non-significant

Answer:

Aerodynamic drag can be reduced by altering the density of the air and the vehicle speed, but these factors are not easily controlled. Instead, to reduce drag, car manufacturers can make the height and width of the front of the car smaller. ... This shape reduces drag and the forces that try to propel the car backwards.

Answer:

Car manufacturers can make the height and width of the front of the car smaller.

Explanation:

The shape reduces drag and the forces it to propel the car backwards.

Answer:

is it multiple choice or....

Answer:

35 feet

Explanation:

Answer:

1. They needed to develop multiple components in software programs.

2. The ability to overlap the development to be more evolutionary in nature.

3. The need to be more risk-averse or the unwillingness to take risks led to the use of a spiral model.

Explanation:

Software development life cycle (SDLC) can be defined as a strategic process or methodology that defines the key steps or stages for creating and implementing high quality software applications.

In SDLC, a waterfall model can be defined as a process which involves sequentially breaking the software development into linear phases. Thus, the development phase takes a downward flow like a waterfall and as such each phase must be completed before starting another without any overlap in the process.

An incremental model refers to the process in which the requirements or criteria of the software development is divided into many standalone modules until the program is completed.

Also, a spiral model can be defined as an evolutionary SDLC that is risk-driven in nature and typically comprises of both an iterative and a waterfall model. Spiral model of SDLC consist of these phases; planning, risk analysis, engineering and evaluation.

What motivated software engineers to move from the waterfall model to the incremental or spiral model is actually due to the following fact;

Answer:

changes of Mass affect the planet because... I'm sorry If this didn't help.

Answer:

hello your question lacks the required diagram attached below is the diagram

answer : 58.47 N

Explanation:

The magnitude of the force acting on the Pin D

Fd = [tex]\sqrt{Dx^2 + Dy^2}[/tex]

    = [tex]\sqrt{16.80^2 + 56^2}[/tex]

    = 58.465 N

Dx = 16.80 N

Dy = 56 N

hello attached below is the detailed solution

Answer:

Explanation:

From the given information;

The first objective is to derive an expression for the execution time in cycles

For an execution time T for the non-pipelined processor;

[tex]T = \dfrac{N \times S}{R}[/tex]

where

N = instruction count

S = average number of clock cycles to fetch & execute an instruction

R = clock rate

From the average number of clock

[tex]S = 1 + \delta _{branch\_penality }[/tex]

where;

[tex]\delta _{branch\_penality }= {Dynamic \ count \times Delay \ Slots}[/tex]

Similarly, we are given that the dynamic count is 20%

∴

The execution time required for all the delayed slots that is filled with NOP instructions can be estimated as:

[tex]\delta _{branch\_penality }=0.20 \times 1.00[/tex]

[tex]\delta _{branch\_penality }=0.20[/tex]

Therefore;

S = 1 + 0.20

S = 1.2

Recall that:

For an execution time T for the non-pipelined processor;

[tex]T = \dfrac{N \times S}{R}[/tex]

[tex]T = \dfrac{N \times 1.2}{R}[/tex]

[tex]T = \dfrac{ 1.2 \ N}{R}[/tex]

To derive another expression that reflects the execution time of 70% delay; we have:

[tex]\delta_{branch\_penality} = 0.20 \times ( 1-0.7)[/tex]

[tex]\delta_{branch\_penality} = 0.20 \times ( 0.3)[/tex]

[tex]\delta_{branch\_penality} = 0.06[/tex]

S = 1 + 0.06

S = 1.06

For an execution time T for the non-pipelined processor;

[tex]T = \dfrac{N \times S}{R}[/tex]

[tex]T = \dfrac{N \times 1.06}{R}[/tex]

[tex]T = \dfrac{ 1.06 \ N}{R}[/tex]

Finally, the compiler's contribution to the increase in speed up percentage for the above two cases is:

[tex]=\begin {pmatrix}\dfrac{T_{all \ delay \ slots }}{T_{70\% \ delay \ slots } } -1 \end {pmatrix} \times 100[/tex]

[tex]= \begin {pmatrix}\dfrac{1.2 }{1.06 } -1 \end {pmatrix} \times 100[/tex]

= (1.1320 - 1) × 100

= 0.1320 × 100

= 13.20%

Therefore, the compiler's contribution to increasing performance as expressed as speed up percentage is 13.20%

Answer:

B. Precisely define the problem that is to be solved.

Explanation:

Engineering can be defined as the scientific and technological principles that is used for the design, development, operation and control of tools, machines or equipments, structures and systems. These machines, tools, systems and structures are typically designed and developed for the purpose of solving peculiar problems relating to human life. Simply stated, engineering is focused on proffering solutions to real life problems through a design process.

Generally, the design process comprises of series of steps used for the development of various tools, machines, structures and systems. In a chronological order, the basic steps of a design process are;

1. Define the problem: to proffer a solution to any problem, you have to precisely define the problem that is to be solved. Therefore, this is the first step of the design process.

2. Conduct a research: the engineer should collect or gather data (informations) relating to the project.

3. Brainstorming and analysis of data: this is the stage where the engineer conceptualize his or her ideas.

4. Create a prototype or simulated model of the product.

5. Product analytics and test: this is where the product is being used and tested for any flaw, error or defects. Thus, troubleshooting is also required at this stage.

Hence, if an engineer is trying to build a new measurement tool; the first step the engineer should complete is to precisely define the problem that is to be solved so as to have a good clear-cut understanding of the problem.

Answer:

attached below is the detailed solution and answers

Explanation:

Attached below is the detailed solution

C(iii) : versus the parameter C

The parameter C is centered in a nonlinear equation, therefore the standard locus will not apply hence when you use a polynomial solver the roots gotten would be plotted against C

Answer: a(s) is of degree n and b(s) is of degree n-1.

a)Characteristic equation in form suitable for Evans's root-locus method is given by a(s) + b(s)K = 0, where a(s) and b(s) are polynomials of s with real coefficients. Now, given equation can be represented as: s + (1/τ) = 0 => s + (1/τ) = 0s + (1/τ)K = 0=> K = -τs/τ + 0Thus, L(s) = s, a(s) = 1, b(s) = 1 and K = -τ.

b)The characteristic equation is given by:s^2 + cs + c + 1 = 0For the root-locus method, we have to write the characteristic equation in the form a(s) + b(s)K = 0. Since the degree of a(s) is 2, we select K such that the degree of b(s) is also 2, and so b(s) will be monic.s^2 + cs + c + 1 = 0=> (s + c/2)^2 + 1/4 - c^2/4 + c = 0=> s^2 + (2c)s + (1 + c - c^2/4) = 0Now, taking a(s) = s^2 + (2c)s + (1 + c - c^2/4) and b(s) = 1 with K = -1/c^2, we have:a(s) + b(s)K = s^2 + (2c)s + (1 + c - c^2/4) - 1/c^2 = 0

c) The characteristic equation is given by:(s + c)3 + A(Ts + 1) = 0

i. versus parameter A:s = -c is a repeated root of multiplicity 3 when A = 0For s = -c, the characteristic equation becomes:-A(Tc + 1) = 0If A = 0, the characteristic equation will be (s + c)^3 = 0 and will have a repeated root at s = -c with a multiplicity of 3.

ii. versus parameter T:s = -c is a repeated root of multiplicity 3 when T = 0.For s = -c, the characteristic equation becomes:3c^2s + A = 0If A = 0, the characteristic equation will be (s + c)^3 = 0 and will have a repeated root at s = -c with a multiplicity of 3.

iii. versus the parameter c:We cannot draw the root locus of (s + c)3 + A(Ts + 1) = 0 with respect to the parameter c because there is no c term in the characteristic equation; it only contains c cubed.

d) The characteristic equation is given by:1 + (kp + k1/s + kDs/Ts + 1)G(s) = 0Assuming G(s) = Ac(s)/d(s), where c(s) and d(s) are monic polynomials with the degree of d(s) greater than that of c(s), the characteristic equation becomes:

d(s) + kp d(s) + k1 d(s)/s + kDs c(s)/T = 0.

Thus, a(s) = d(s) + k1 d(s)/s and b(s) = kDc(s)/T + kp d(s) with K = -1.

Therefore, a(s) is of degree n and b(s) is of degree n-1.

Learn more about root-locus : https://brainly.com/question/18406313

#SPJ11

Answer:

The wind turbine has little impact on the environment compared to conventional power plants. Meanwhile the Wind turbine can affect the wildlife meaning birds are being harmed by the blades.

Explanation: Hope that helps:)

Answer:

Explanation:

One number is wrong; they all lack units.

The basic ratio is 1" = 20', so you can divide feet by 20 to find inches.

Perhaps you want decimal inches:

Answer:

science is hard but human cloning this is legendary but still its up to the government but me i would allow this because its something that science can upgrade to

Explanation:

Answer:

axial stress in bar B = 25Mpa.

Deformation of bar A = 0.4mm.

Explanation:

PS: Kindly check the attached picture for the diagram showing the two bars that is to say the bar A and the bar B.

So, we are given the following data or information or parameters which we are going to use in solving this particular question or problem. Here they are;

The cross-sectional areas of Bars A and B =  400 mm2, the  modulus of elasticity of  bar A and bar B = 200 GPa, applied force = 10kN.

STEP ONE: The first step is to determine or calculate the axial stress in bar B. Therefore,

Axial stress in bar B = 10 × 10³ ÷ 400 × 10⁻⁶ = 25 Mpa.

STEP TWO: The second step here is to determine or calculate the deformation of bar A. Therefore,

The deformation of bar A = 20 × 10³ ×1.5 ÷ 400 × 10⁻⁶ × 200 × 10³ = 0.375 mm.

Answer:

In 2019, the average term length was 69 months for new cars and 65 months for used vehicles. Most car loans are available in 12 month increments, lasting between two and eight years. The most common loan terms are 24, 36, 48, 60, 72, and 84 months, according to Autotrader

Explanation:

Answer:

C₁₀ = 6.3 KN

Explanation:

The catalog rating of a bearing can be found by using the following formula:

C₁₀ = F [Ln/L₀n₀]^1/3

where,

C₁₀ = Catalog Rating = ?

F = Design Load = 2.75 KN

L = Design Life = 1800 rev/min

n = No. of Hours Desired = 10000 h

L₀ = Rating Life = 500 rev/min

n₀ = No. of Hours Rated = 3000 h

Therefore,

C₁₀ = [2.75 KN][(1800 rev/min)(10000 h)/(500 rev/min)(3000 h)]^1/3

C₁₀ = (2.75 KN)(2.289)

C₁₀ = 6.3 KN

Answer:

Yes, this is completely independent.

Explanation:

Yes, this is completely independent. Even though there are no South American individuals that are majoring in biomedical engineering in this party it is still a completely independent factor. The origin of birth of an individual does not tie them to a specific degree or field of expertise, therefore a South American individual can study anything they want including mechanical engineering, electrical engineering, or biomedical engineering.

Answer: Technology is the application of scientific knowledge for practical purposes, especially in industry.

Mechanical.

Electronic.

Industrial and manufacturing.

Medical.

Communications.

Explanation:

Answer:

Technology is something like a phone or like a tablet or like an electrace car

Explanation:

In the feature i belive that there is going to be more and higher andanved  technology or like people say flying cars a robots.  But i feel more advanced stuff like phones and computers or labtops or like tablets.

Answer:

some part of your question is incomplete

attached below is the complete question

Answer :

F(0) = -5  < 0

F(1) = e - 1 > 0

since the functions : f(0) and f(1) have opposite signs then there is a 'c' whereby F(c) = 0 ( intermediate value theorem fulfilled )

Hence there is a root in the given equation : [tex]e^x = 6 - 5x[/tex]

Explanation:

using Intermediate value Theorem

If F(x) is continuous and f(a) and f(b) have opposite signs then there will be a'c'E (a,b)  whereby F(c) = 0

given equation : [tex]e^x = 6 - 5x[/tex]   on (0,1)

and F(x) = [tex]e^x - 6 + 5x = 0[/tex]

This shows that the F(x) is continuous on (0,1)

F(0) = [tex]e^0 - 6 + 5(0)[/tex]  = -5 which is < 0

F(1) = [tex]e^1 -6 + 5(1)[/tex] = e -1 > 0  and e = 2.7182

since the functions : f(0) and f(1) have opposite signs then there is a 'c' whereby F(c) = 0 ( intermediate value theorem fulfilled )

Hence there is a root in the given equation : [tex]e^x = 6 - 5x[/tex]

Answer:

Both Technicians A and B  are correct

Explanation:

If the fluid pressure will decrease quickly in a car when the ignition says that one or more has been switched off. One or two could be leaking or the source could be a faulty check mechanism in the catalytic converter.

Answer:

YES

Explanation:

NO

;-;

Answer:

it should be accuracy

Explanation:

Answer:

option C

Explanation: