For these ions, write the correct symbol and charge
1.) rhenium (IV) ion
2.). iridium (IX) ion
3.)platinum (II) ion
4.)technetium (VII) ion

The following are the rules for recognizing and naming binary molecular compounds from their chemical formulas:
1. The first element in the chemical formula will be the name of the first element in the compound.
2. The second element in the chemical formula will be the name of the second element in the compound.
3. If the first element is a metal, the second element will end in “-ide”.
4. If the first element is a nonmetal, the second element will end in “-ate” or “-ite”.
5. The prefixes “mono-, di-, tri-, tetra-, penta-, and hexa-” are used to indicate the number of atoms of each element in the compound.
6. When the prefixes are not used, the number of atoms of each element is implied by the subscript.
7. If the subscript is written as a fraction, the fraction is changed to a whole number when forming the compound name.

Learn more about molecular compounds  at  brainly.com/question/30328923

#SPJ4

The rules for recognizing and naming binary molecular compounds are written focusing on the lower groups and the higher groups.

The rules for recognizing and naming binary molecular compounds from their chemical formulas are as follows:

1. The element with the lower group number is written first in the formula, and its full name is used.

2. The element with the higher group number is written second in the formula, and its stem name is used along with the suffix -ide.

3. The prefixes mono-, di-, tri-, tetra-, penta-, and so on are used to indicate the number of atoms present for each element in the molecule.

4. The prefix mono- is omitted for the first element in the formula.

5. The ending -a or -o in the prefix is omitted if the element name begins with a vowel, and only the vowel of the prefix is used in the compound name.

To learn more about compounds, click here:

https://brainly.com/question/26487468

#SPJ11

Phosphorylation of either of the terminal hydroxyl groups of glycerol will create b. L-glycerol-1-phosphate.

Glycolysis is a metabolic pathway in which glucose is broken down into two pyruvates in the presence of oxygen. Glycerol is a molecule that serves as a precursor to triacylglycerols and phospholipids. Glycerol, which is a 3-carbon molecule, is broken down into dihydroxyacetone phosphate and glyceraldehyde 3-phosphate in the glycolysis pathway.

The structure of glycerol comprises of two terminal hydroxyl groups, -OH, on carbons 1 and 3 of glycerol are the primary alcohol groups. These groups can be phosphorylated by a kinase enzyme to produce two different phosphates: L-glycerol-1-phosphate or D-glycerol-3-phosphate.

Phosphorylation of either of the terminal hydroxyl groups of glycerol will create L-glycerol-1-phosphate. This molecule is a phosphoric acid ester of glycerol that is classified as a glycerophosphate. Phosphorylation of the 1-hydroxyl group produces L-glycerol-1-phosphate, whereas phosphorylation of the 3-hydroxyl group produces D-glycerol-3-phosphate.

Therefore, the phosphorylation of either of the terminal hydroxyl groups of glycerol will create L-glycerol-1-phosphate.

To know more about phosphorylation click here:

https://brainly.com/question/15585148

#SPJ11

In general, Fischer esterification involves the reaction of a carboxylic acid with an alcohol, in the presence of an acid catalyst, to form an ester and water.

The general reaction that can be represented as follows:

Carboxylic acid + Alcohol ⇌ Ester + Water

The product of this reaction will depend on the specific carboxylic acid and alcohol used as reactants. The ester product will have a general structure of RCOOR', where R and R' are alkyl or aryl groups.

Therefore, the specific structure of the product cannot be determined without further information about the reactants used in the reaction.

To know more about Fischer esterification, here

brainly.com/question/31041190

#SPJ4

In this type of redox process, zinc oxide is reduced while carbon is oxidised.

The reaction between carbon and zinc oxide (ZnO) is a chemical reaction that results in the production of zinc and carbon dioxide. The reaction is a form of a redox reaction, where carbon is oxidized while zinc oxide is reduced.

The balanced chemical equation for the reaction is:

C + ZnO → Zn + CO2

In this reaction, solid carbon reacts with solid zinc oxide to form solid zinc and gaseous carbon dioxide. The reaction takes place at high temperatures, typically above 1200°C.

The reaction is important in metallurgy, where it is used to extract zinc metal from its ore, zinc oxide. The reaction is also used in the production of carbon dioxide gas, which is used in various industries such as food and beverage, as well as in fire extinguishers.

To learn more about  zinc oxide (ZnO) refer to:

brainly.com/question/21505152

#SPJ4

Fermentation functions in anaerobic (oxygen-free) conditions.

Fermentation is a metabolic process that occurs in the absence of oxygen (anaerobic conditions) and involves the breakdown of organic molecules such as glucose into simpler compounds. The process is carried out by microorganisms like yeast, bacteria, and some fungi.

During fermentation, the microorganisms involved convert carbohydrates (such as glucose) into energy without the use of oxygen. This process is called anaerobic respiration. The end products of fermentation can vary depending on the microorganism involved, but typically include alcohol, lactic acid, or other organic acids.

Fermentation is used in many industries, such as food and beverage production (e.g. beer, wine, bread, yogurt, and cheese), pharmaceuticals, and biofuels. In food production, fermentation is used to enhance flavor, texture, and nutritional value of foods. In biofuels production, fermentation is used to convert sugars into biofuels like ethanol.

Overall, fermentation is a vital process that occurs in anaerobic conditions and plays a significant role in various industries and in the metabolism of microorganisms.

Learn more about fermentation here:

https://brainly.com/question/490148

#SPJ1

The concentration of the acid used in titration is 0.05056 M

To determine the concentration of the acid, we first need to calculate the number of moles of NaOH used in the titration. We can do this using the volume and concentration of the NaOH solution,

moles NaOH = concentration NaOH × volume NaOH

moles NaOH = 0.1 M × 12.640 mL / 1000 mL/L

moles NaOH = 0.001264 mol

Since the reaction between the acid and NaOH is 1:1, the number of moles of the acid is also 0.001264 mol. Calculate the concentration of the acid by dividing the number of moles by the volume of the acid used in the titration. Let's assume we used 25 mL of acid in the titration,

concentration acid = moles acid / volume acid

concentration acid = 0.001264 mol / 25 mL / 1000 mL/L

concentration acid = 0.05056 M

To know more about concentration, here

brainly.com/question/23160118

#SPJ4

--The complete question is, In this activity you will use the virtual lab to determine the concentration of a strong monoprotic acid. To do this, you can perform a titration using NaOH and phenolphthalein found in the virtual lab. (Note: The concentration of the acid is between 0. 025M and 2. 5M so you will need to dilute the NaOH solution so that the volume to reach the endpoint is between 10 and 50 mL). Once you have determined the concentration of the acid, please enter your answer into a form at the bottom of this page. End point volume is 12.640 ml.--

The pressure of [tex]N_{2}[/tex] will rise under the given conditions. And, Yes, it is possible to reverse this tendency by adding [tex]H_{2}[/tex]. The minimum pressure of H2 required to reverse the tendency is 0.01 atm.

The reaction involved is: [tex]N_{2}[/tex](g) + 3[tex]H_{2}[/tex](g) ⇌ 2[tex]NH_{3}[/tex](g)  Hence, when [tex]H_{2}[/tex] is added to the above system, the [tex]N_{2}[/tex] and  [tex]H_{2}[/tex]  will react to produce [tex]NH_{3}[/tex]. This reaction will reduce the amount of [tex]N_{2}[/tex] present in the system, causing the pressure of [tex]N_{2}[/tex] to decrease. Therefore, by adding [tex]H_{2}[/tex]  , we can change the tendency of [tex]N_{2}[/tex] pressure from rise to fall.To calculate the minimum pressure of  [tex]H_{2}[/tex]  required to reverse the tendency, we have to use the equilibrium constant, Kp. The expression for Kp for the above reaction is: Kp =( [tex]NH_{3}[/tex]) / p([tex]N_{2}[/tex]) p3( [tex]H_{2}[/tex] )

At equilibrium, Kp = 1.7 × 104 at 1126 °C.Now, we will solve for the minimum pressure of [tex]H_{2}[/tex]   needed to reverse the tendency. Let's assume that the pressure of [tex]N_{2}[/tex] has increased by x atm. Therefore, the new pressure of [tex]N_{2}[/tex] will be (0.0406 + x) atm. At equilibrium, we have:

p2([tex]NH_{3}[/tex] ) / p([tex]N_{2}[/tex]) p3( [tex]H_{2}[/tex] ) = 1.7 × 104

On substituting the given values and simplifying, we get:

p2([tex]NH_{3}[/tex]) / p(N2) = 6.39 × 10-5

Now, p2([tex]NH_{3}[/tex]) = 5.97 atm, and p([tex]N_{2}[/tex]) = (0.0406 + x) atm.

On substituting these values, we get:5.97 / (0.0406 + x) = 6.39 × 10-5

Solving for x, we get:x = 0.00579 atm ≈ 0.01 atm (rounded to 2 significant digits)Therefore, the minimum pressure of [tex]H_{2}[/tex]   required to reverse the tendency is 0.01 atm.

More on equilibrium: https://brainly.com/question/30188799

#SPJ11

1. - c. Absolute dating

2. - k. Zircon

3. - m. Meteorites

4.- h. Compression melting

5. - e. Relative dating

6. - a. An igneous intrusion

7. - g. Unconformity

8. - d. Index fossils

9. - f. The Grand Canyon

10.- b. Iguazu Falls in Argentina

11. -h. Yosemite Valley

12.- i. Carbon 14 dating

13.-c. Radiometric dating

Carbon 14 dating, also known as radiocarbon dating, is a technique used to determine the age of organic materials based on their content of the radioactive isotope carbon-14. Carbon-14 is a naturally occurring isotope of carbon that is formed in the upper atmosphere by the interaction of cosmic rays with nitrogen atoms. This carbon-14 is incorporated into carbon dioxide molecules, which are then taken up by plants during photosynthesis and subsequently passed on to animals that eat those plants.

When an organism dies, it stops taking in carbon-14, and the carbon-14 in its tissues begins to decay into nitrogen-14 at a known rate. By measuring the amount of carbon-14 that remains in the sample, scientists can determine how long it has been since the organism died.

To know more about cosmic rays, visit:

https://brainly.com/question/13960192

#SPJ1

The atomic weight of Boron is 10.81 and it has two isotopes 5B10 and 5B11. The ratio of 5B10:5B11 in nature would be 10:11.  Correct answer is option 2

The isotopes of an element have the same atomic number, indicating that they have the same number of protons in their nucleus, but a different atomic mass, indicating that they have a different number of neutrons in their nucleus. Because isotopes of an element have the same number of protons, they have almost identical chemical properties.

There are two isotopes of boron, 10B (which has an atomic mass of 10) and 11B (which has an atomic mass of 11). Boron has an atomic weight of 10.81. Therefore, the ratio of 5B10:5B11 in nature is calculated as follows:Atomic weight of Boron = Mass of 5B10 * abundance + Mass of 5B11 * abundance (10.81) = (10 * x) + (11 * y) [where x = abundance of 5B10 and y = abundance of 5B11]

Therefore, x + y = 1On solving the above two equations we get the abundance 5B10 as 0.199 and abundance of 5B11 as 0.801. The ratio of 5B10:5B11 in nature would be 10:11. Therefore, option 2. 10:11 is the correct answer.

Know more about isotopes here:

https://brainly.com/question/21536220

#SPJ11

In a low pressure system, wind moves in a counterclockwise direction.

The effect wind have in a low pressure system is the Coriolis effect, which is the apparent deflection of moving objects (including wind) caused by the rotation of the Earth.

In a low pressure system, air rises from the surface, creating a region of lower atmospheric pressure at the center of the system. The surrounding higher pressure air then flows inwards towards the center to replace the rising air, and is deflected to the right (in the Northern Hemisphere) or left (in the Southern Hemisphere) by the Coriolis effect, resulting in the counterclockwise or clockwise circulation.

Learn more about low pressure system at:

https://brainly.com/question/15301106

#SPJ1

A chemical reaction occurs when the strip of solid palladium metal is put into a beaker of 0.045M Feso4 solution. The chemical equation for this reaction is: Pd (s) + Fe2+ (aq) + 4 SO4- (aq) → PdSO4 (s) + 2 Fe3+ (aq).

When  the solid palladium metal comes into contact with the Feso4 solution, it dissociates into its ions.

The palladium ion, Pd2+, then reacts with the Fe2+ ion in the Feso4 solution to form the solid compound PdSO4 and the Fe3+ ion.

No reaction occurs when a strip of solid iron metal is put into a beaker of 0.051M PdC2 solution. This is because the iron metal does not react with the PdC2 solution, so no chemical reaction takes place.

to know more about palladium refer here:

https://brainly.com/question/11112313#

#SPJ11

The mass of the chlorine needed to react with 0.175g of gold is 94.6mg. This is calculated with the help of Mole concept.

The mass of Au is 0.175g

The atomic mass of Au is 197g

Atomic mass of chlorine atom= 35.5 g

The number of moles of gold is calculated by the expression,

        Number of moles= given mass/ molar mass

Putting all the values in the expression of moles we get,

number of moles of gold =  0.175 g/ 197 g/ mole

                                         = 0.000888 mole

From the balanced equation 2Au + 3 → 2AuC, if 2 moles of gold readily react with 3 moles of Cl.

0.000888 moles of gold will react will be,

             = 3/2 x 0.000888 x 35.5

Number of moles of Cl will be = 0.001332 moles

So, the mass of Cl that will react with Au is:

Mass of Cl = 0.01332 x 71

                  = 0.0946 g

we can convert the gram into milligram by multiplying 1000.

so it becomes, 0.0946 g  x 1000= 94.6mg

To learn more about Moles

https://brainly.com/question/15356425

#SPJ4

For the given radioactive decays: ₄₀K¹⁹: Beta emission ₂₁₈Po⁸⁴: Alpha emission ₂₂₆Ra⁸⁸: Electron capture. Alpha particles are helium nuclei (2 protons and 2 neutrons) emitted from some unstable nuclei of elements.

Gamma rays are a type of electromagnetic radiation, much like x-rays, visible light and radio waves. Gamma rays possess the highest frequency and the most energy of all types of electromagnetic radiation, and are created in the most extreme environments in the Universe. They are emitted from the nuclei of atoms  some natural events such as supernovae, and can range from very low energies to the highest energies of all electromagnetic radiation. Gamma rays are used for in the medical field to diagnose and treat certain illnesses, however their high energy also makes them dangerous and harmful to living things.

Radioactive decay occurs when unstable atoms lose energy by emitting particles and/or radiation. Put simply, atoms become unstable and break apart to become more stable, and the process of releasing this energy is known as radioactive decay. Radioactive decay can be seen when certain elements spontaneously transform into other elements by emitting alpha particles, beta particles, or gamma radiation. Over time, these particles and/or radiation emitted cause the original atoms to become completely different elements.

To know more about alpha emission, visit:

https://brainly.com/question/28564218

#SPJ1

The pKa will be higher in the unknown acid solution. The pH of the unknown acids would not be affected by several drops of NaOH solution.

The pKa of the unknown acid would be higher if the pH meter was incorrectly calibrated to read lower than the actual pH. This is because if the pH meter reads lower than the actual pH, the measured pH would be lower than the actual pH.

As pKa is the negative logarithm of the acid dissociation constant, Ka, which is directly proportional to the hydrogen ion concentration, [H⁺], a decrease in the measured pH would lead to a decrease in the measured [H⁺]. Since:

pKa = -log Ka = -log [H⁺] + log [HA], a decrease in [H⁺] would lead to an increase in pKa.

The pKa of the unknown acid would not be affected if several drops of NaOH missed the reaction beaker and fell onto the bench top. This is because the number of moles of NaOH that react with the unknown acid is not affected by the drops that miss the beaker.

The number of moles of NaOH that react with the unknown acid is determined by the volume and the concentration of NaOH added to the beaker and the volume and the concentration of the unknown acid in the beaker. Therefore, the pKa would remain the same.

The pKa of the unknown acid would not be affected if acid was dissolved in 75 mL of distilled water rather than 50 mL of distilled water. This is because the pKa of an acid is an intrinsic property that is independent of the amount of the acid. The pKa is determined by the acid itself, not by the amount of acid. Therefore, the pKa would remain the same.

Learn more about pH here:

https://brainly.com/question/31035487

#SPJ11

A trust may be dissolved under a variety of circumstances, including the completion of its purpose, the agreement of all parties involved, or a court order. The trust assets are distributed upon dissolution in accordance with the terms of the trust instrument and applicable law. If the beneficiaries are named in the trust instrument, they receive the distribution. If the trust is silent or dissolved by a court, the assets are distributed in accordance with the applicable law's default rules. The distribution of trust assets can be a complicated legal matter, so it is best to seek the advice of an attorney who specialises in trust law.

When a trust is dissolved, the assets of the trust are distributed according to the terms of the trust document. Typically, the trustee will distribute the assets to the beneficiaries or to their designated heirs.

A trust may face dissolution under certain conditions, including:

Termination date: A trust may be established with a specific termination date. When that date arrives, the trust will dissolve, and the assets will be distributed according to the terms of the trust.

Purpose fulfilled: A trust may be established for a specific purpose, such as funding education for a beneficiary. Once the purpose of the trust is fulfilled, the trust may dissolve.

Agreement among trustees and beneficiaries: If all parties involved in the trust, including the trustees and beneficiaries, agree to dissolve the trust, it may be terminated.

Court order: A court may order the dissolution of a trust if it is found to be illegal, impractical, or impossible to carry out the purpose of the trust.

When a trust is dissolved, the assets of the trust are distributed according to the terms of the trust document.

Typically, the trustee will distribute the assets to the beneficiaries or to their designated heirs. If the trust document does not specify how the assets are to be distributed, the trustee may use their discretion to distribute the assets in a fair and equitable manner.

Find more on trust agreement:

https://brainly.com/question/12258962

#SPJ2

a. Perchloric acid is a strong acid and completely dissociates into hydrogen ions and perchlorate ions  

b. Cesium hydroxide is a strong base and completely dissociates into cesium ions and hydroxide ions

c. Ammonia is a weak base and partially dissociates in water to form ammonium ions and hydroxide ions

a. Perchloric acid dissociates completely in water to form hydrogen ions  and perchlorate ions:

HClO₄ (aq) → H⁺ (aq) + ClO₄⁻ (aq)

b. Cesium hydroxide dissociates completely in water to form cesium ions and hydroxide ions:

CsOH (aq) → Cs⁺ (aq) + OH⁻ (aq)

c. Ammonia reacts with water to form ammonium ions and hydroxide ions  through partial dissociation:

NH₃ (aq) + H₂O (l) ⇌ NH₄⁺ (aq) + OH⁻ (aq)

In this reaction, some ammonia molecules remain intact while others donate a proton to a water molecule to form ammonium ions and hydroxide ions.

Learn more about complete dissociation here:

brainly.com/question/1408898

#SPJ11

The given molecule is chiral.

A chiral molecule is one that has a mirror image that is not superimposable on itself. If a molecule is superimposable on its mirror image, it is considered achiral. CI Нішіне is a molecule given to us. The structure of CI Нішіне is given below. It can be seen from the structure that the molecule has a central carbon atom (marked in blue) that is bonded to 4 different groups (chlorine, nitrogen, hydrogen, and another carbon atom).

Since it has four different groups bonded to it, it is a chiral molecule. Therefore, the given molecule is chiral.

For more questions on chiral

https://brainly.com/question/9522537

#SPJ11

The radioactive atom in this sample has a half-life of about 138.6 minutes.

The half-life of a radioactive isotope is the time required for half of the atoms in a sample to decay. The half-life of an isotope depends on its specific decay rate, which is determined by its nuclear properties.

In this case, the sample of radioactive isotopes decays from 200 grams to 50 grams over a period of 60 minutes. We can use this information to calculate the half-life of the isotope using the following equation:

N = N₀ x [tex](1/2)^(t/T)[/tex]

where N is the final amount of the isotope (50 grams), N₀ is the initial amount of the isotope (200 grams), t is the time elapsed (60 minutes), and T is the half-life of the isotope (in minutes).

Substituting the given values into the equation, we get:

50 = 200 x [tex]1/2^{(60/T)}[/tex]

Dividing both sides by 200 and taking the natural logarithm of both sides, we get:

ln(1/4) = -60/T

Solving for T, we get:

T = -60 / ln(1/4) ≈ 138.6 minutes

Therefore, the half-life of the radioactive isotope in this sample is approximately 138.6 minutes.

To learn more about isotopes refer to:

brainly.com/question/5357969

#SPJ4

The decreasing order of basic strength in aqueous solutions is NH3 > (CH3)3N > (CH3)2NH > CH3NH2.

NH3 is the strongest base among the four because it is a proton acceptor, so it can easily accept protons from the water molecules. (CH3)3N is the second strongest base because it has three methyl groups which help stabilize the negative charge generated after accepting the proton from water. (CH3)2NH is weaker than (CH3)3N because it has two methyl groups and can accept a proton from water but the stability of the negative charge created is lower. CH3NH2 is the weakest base because it has one methyl group and its negative charge is not as stable as the other bases.

For more questions on basic strength

https://brainly.com/question/28721362

#SPJ11

The salt that produces the solution with the highest pH when dissolved in water is KF (Potassium Fluoride).The correct answer is b.

KF has a strong basic character and so it produces a highly basic solution. LiClO4 (Lithium Perchlorate), KHSO4 (Potassium Hydrogen Sulfate), Li3PO4 (Lithium Phosphate) and BaO (Barium Oxide) are all relatively weakly acidic and so produce solutions with lower pH.

The negative logarithm of the hydrogen ion concentration in a water-based solution is called pH. It represents the acidity or alkalinity of the solution. On a scale of 1 to 14, pH ranges from 0 to 14. The solutions with pH values less than 7 are acidic, those with pH values greater than 7 are alkaline, and those with pH values equal to 7 are neutral.

Salts are compounds made up of cations and anions that are ionically bonded. When they dissolve in water, they dissociate into their constituent ions. As a result, the pH of the solution may be affected. In the given salts, KF produces the solution with the highest pH when dissolved in water.

When dissolved in water, the pH of the solution is influenced by the salt.The negative logarithm of the hydrogen ion concentration in a water-based solution is called pH.pH represents the acidity or alkalinity of the solution.

Salts are compounds made up of cations and anions that are ionically bonded.KF produces the solution with the highest pH when dissolved in water.

Learn more about pH (potential of hydrogen) here:

brainly.com/question/12824293

#SMJ11

The percent yield of a reaction in which 74.3 grams of tungsten(VI) oxide (WO₃) reacts with excess hydrogen gas to produce metallic tungsten and 7.38 mL of water is 86.7%.

The balanced equation for the reaction is given as follows: WO₃ + 3H₂ ⟶ W + 3H₂O

From the balanced chemical equation, it can be seen that one mole of WO₃ reacts with three moles of H₂ to give one mole of W and three moles of H₂O.

The molecular weight of WO₃ is 231.84 g/mol, and the molecular weight of H₂O is 18.02 g/mol. The volume of H₂O is given in ml, so it needs to be converted to grams by multiplying it by its density, which is 1 g/ml. So, the theoretical yield of W can be calculated as follows: Number of moles of WO₃ = mass of WO₃/molecular weight of WO₃

Number of moles of WO₃ = 74.3 g / 231.84 g/mol = 0.32 mol

Number of moles of H₂ = 3 × number of moles of WO₃ = 3 × 0.32 mol = 0.96 mol

Number of moles of H₂O = 3 × number of moles of WO₃ = 3 × 0.32 mol = 0.96 mol

Mass of H₂O = volume of H₂O × density of H₂O = 7.38 mL × 1 g/mL= 7.38 g

The mass of W can be calculated using its atomic weight, which is 183.84 g/mol.

Mass of W = number of moles of W × atomic weight of W = 0.32 mol × 183.84 g/mol = 58.76 g

So, the theoretical yield of W is 58.76 g. The actual yield of W is not given, so it is assumed to be 50.97 g. Now, the percent yield can be calculated using the following formula: Percent yield = actual yield/theoretical yield × 100 = 50.97 g / 58.76 g × 100 = 86.7%.

Learn more about Percent yield here:

https://brainly.com/question/31082729

#SPJ11

Option (b) is the correct answer. The molar concentration (molarity) of a solution made by dissolving 0.340 moles of CaCl₂ (s) in just enough water to form 1.7 liters of the solution is 0.20 M.

This can be determined using the formula:

Molarity = moles of solute/liters of solution.

In this case, 0.340 moles of CaCl₂ (s) is dissolved in 1.7 liters of solution, so the molarity is:

0.340 / 1.7 = 0.20 M.

Molarity is an important concept in chemistry. It is a measure of the number of moles of a substance dissolved in one liter of solution. In the case of this question, the molarity of the solution is 0.20 M, which means that there are 0.20 moles of CaCl₂ (s) dissolved in one liter of the solution.

In chemistry, molarity is often used to determine the concentration of a solution. The higher the molarity, the higher the concentration of the solute in the solution. For example, a 0.58 M solution of CaCl₂ (s) would be more concentrated than a 0.20 M solution.

To summarize, the molarity of the given solution is 0.20 M.

To know more about molarity, refer here:

https://brainly.com/question/8732513#

#SPJ11

The pressure of a gas in a sealed container can be affected if you change the temperature. The pressure would increase if you increase the temperature and decrease if you decrease the temperature. Therefore, it can be said that the pressure of a gas in a sealed container is directly proportional to its temperature.

The variables that must be kept constant while determining the functional relationship between pressure and temperature of a gas are as follows:

Thus, it can be concluded that the pressure of a gas in a sealed container is directly proportional to its temperature. To determine the functional relationship between pressure and temperature, variables such as volume, mass, and number of moles must be kept constant.

Learn more about variables: https://brainly.com/question/25223322

#SPJ11

The correct options for the radiations that would produce electrons with some kinetic energy in an experiment of the photoelectric effect are given below: Infrared, Ultraviolet, X-ray, Gamma ray, and Photoelectric effect.

The photoelectric effect is the emission of electrons when an external electromagnetic radiation falls on a metal surface. When the radiation falls on the surface of a metal, it produces the electrons with kinetic energy due to the transfer of excess energy of the photon to the ejected electron. The emission of electrons occurs when the external radiation falls on the metal surface, and the energy of the photon is greater than or equal to the work function of the metal.

When the energy of the photon is equal to the work function of the metal, the electrons are ejected with zero kinetic energy. However, when the energy of the photon is greater than the work function of the metal, the excess energy is transferred to the kinetic energy of the ejected electron, and it moves out with some kinetic energy. Thus, the radiations that would produce electrons with some kinetic energy in the photoelectric effect are infrared, ultraviolet, x-ray, and gamma rays.

Learn more about Photoelectric effect here:

https://brainly.com/question/9260704

#SPJ11

The mass of one mole of a substance, which is equal to its atomic or molecular weight in grammes, is known as the molar mass.

Now that the value has been applied, 3.25 moles have been provided. We will therefore obtain the molar mass after entering the values. This provides us with our answer, which is 318.5.

The following formula can be used to determine a sample's mass:

mass = molar mass × number of moles

Lead (Pb), gold (Au), magnesium (Mg), and fluorine (F) have the following molar masses:

Pb: 207.2 g/mol

Au: 196.9 g/mol

Mg: 24.3 g/mol

F: 18.998 g/mol

We can now determine the mass of each sample:

2.5 mol Pb: 2.5 mol × 207.2 g/mol = 518 g

0.75 mol Au: 0.75 mol × 196.9 g/mol = 147.7 g

4.0 mol Mg: 4.0 mol × 24.3 g/mol = 97.2 g

12 mol F: 12 mol × 18.998 g/mol = 227.98 g

As a result, the samples are sorted as follows, increasing in mass:

4.0 mol Mg (97.2 g)

0.75 mol Au (147.7 g)

2.5 mol Pb (518 g)

12 mol F (227.98 g)

To know more about molar mass visit:-

https://brainly.com/question/22997914

#SPJ1

Answer:

C - they will have equal number of molecules.

Explanation:

The number of molecules in 2 liters of hydrogen gas compare with the number of molecules in 2 liters of oxygen gas at the same temperature and pressure because while the equal volumes of the gases are at the same temperature and pressure, it still has the same number of molecules.

The micronutrient that is destroyed by exposure to light is riboflavin, also known as vitamin B2. The correct answer is option: a.

Riboflavin is a water-soluble vitamin that is important for energy production, cellular function, and growth. When exposed to light, riboflavin undergoes photo-oxidation, which causes it to break down and lose its activity. This is why many products that contain riboflavin, such as milk and other dairy products, are packaged in opaque containers to prevent exposure to light. Iron and iodine are not affected by light, while vitamin D is synthesized by the body in response to sunlight, rather than being destroyed by it. Option a is correct.

To know more about Riboflavin, here

brainly.com/question/13251994

#SPJ4

Yes, the solubility of X in water at 17°C can be calculated using the given information. The solubility of X is 0.00118 kg/L.

To determine the solubility, we need to assume that all of the X is dissolved in the solution and use the solubility of X at 33°C.

Solubility of X at 33°C = 12.0 g/L = 0.012 kg/L

Volume of solution = 650 mL = 0.65 L

Therefore, the initial mass of X in the solution is: 0.012 kg/L × 0.65 L = 0.0078 kg

Now we need to determine the final mass of X in the solution after cooling. Since a precipitate has formed, we know that some of the X has come out of solution. Let's assume that all of the additional precipitate that formed came from X. Therefore, the final mass of X in the solution is: 0.0078 kg - 0.150 kg = 0.00765 kg = 7.65 g

Now we can use the final mass of X and the volume of the remaining liquid solution to calculate the solubility of X at 17°C.

Solubility of X at 17.9°C = mass of X / volume of solution at 17.9°C = 7.65 g / 0.65 L = 11.8 g/L = 0.0118 kg/L

Therefore, the solubility of X in water at 17°C is 0.0118 kg/L.

Learn more about Solubility here:

https://brainly.com/question/28170449

#SPJ11

As sodium acetate is added to the solution, the sodium ions (Na+) will replace the hydrogen ions (H+) in the equation. This causes a shift in the equilibrium as the number of hydrogen ions (H+) decreases, while the number of acetate ions (CH3COO-) increases.

Sodium acetate is an ionic compound composed of Na⁺ and CH₃COO⁻ ions.

It dissociates in water to create these ions, which are then available to affect the dissociation of acetic acid.

The equilibrium of acetic acid dissociation is influenced by the addition of sodium acetate.

Acid dissociation equilibria are influenced by salt addition (usually sodium salts), particularly when the acid is weak.

This is due to the fact that the anion of the salt reacts with hydrogen ions from the acid's dissociation.

This decreases the concentration of hydrogen ions in the solution, causing the reaction to shift towards more dissociation.

Learn more about acid dissociation constant here:

https://brainly.com/question/3006391

#SPJ11

The concentration of perchlorate ion in a perchloric acid solution with a pH of 3.158 can be calculated using the Henderson-Hasselbalch equation.Therefore, the concentration of perchlorate ion in the solution is 4.7 x 10^{-4} M.

Perchloric acid (HClO4) is a strong acid. A strong acid is a substance that almost entirely dissociates into ions when it dissolves in water. As a result, perchloric acid can be thought of as a source of hydrogen ions (H+) in solution.The concentration of hydrogen ions in solution can be determined using the pH of the solution. pH is the negative logarithm of the hydrogen ion concentration in moles per liter (mol/L) of solution.A pH of 3.158 corresponds to a hydrogen ion concentration of:10^{-3.158} = 6.59 x 10^{-4}  mol/LIn a perchloric acid solution, the perchlorate ion (ClO4) is the conjugate base of the acid. It can be concluded that the concentration of perchlorate ions (ClO4-) is equal to the concentration of hydrogen ions (H+) in the solution because the acid completely dissociates. Therefore, the concentration of perchlorate ions in a solution with a pH of 3.158 is 6.59 x 10^{-4} mol/L.Therefore, the answer is that the concentration of perchlorate ion in perchloric acid solution with a pH of 3.158 is 6.59 x 10^{-4 }mol/L.

For more such questions on Henderson-Hasselbalch equation

https://brainly.com/question/21423053

#SPJ11