Find x
I need help plz :(
A. 6
B. 24
C. 12
D. 12 sqr root of 3
E. 36

The curve is concave upward on this interval. In interval notation, the answer is:(0, pi/2)

To find dy/dx, we use the chain rule:

dy/dt = -sin(t)

dx/dt = -sin(2t)

Using the chain rule,

dy/dx = dy/dt / dx/dt = -sin(t) / sin(2t)

To find d2y/dx2, we can use the quotient rule:

d2y/dx2 = [(sin(2t) * cos(t)) - (-sin(t) * cos(2t))] / (sin(2t))^2

= [sin(t)cos(2t) - cos(t)sin(2t)] / (sin(2t))^2

= sin(t-2t) / (sin(2t))^2

= -sin(t) / (sin(2t))^2

To determine where the curve is concave upward, we need to find where d2y/dx2 > 0. Since sin(2t) is positive on the interval (0, pi), we can simplify the condition to:

d2y/dx2 = -sin(t) / (sin(2t))^2 > 0

Multiplying both sides by (sin(2t))^2 (which is positive), we get:

-sin(t) < 0

sin(t) > 0

This is true on the interval (0, pi/2). Therefore, the curve is concave upward on this interval.

In interval notation, the answer is: (0, pi/2)

To know more about  chain rule refer to

https://brainly.com/question/28972262

#SPJ11

The triangle formed by the sticks of lengths 10 in., 24 in., and 26 in. is not a right triangle because it does not satisfy the Pythagorean theorem.

No, the triangle is not a right triangle.

To determine if a triangle is a right triangle, we can apply the Pythagorean theorem, which states that in a right triangle, the square of the length of the hypotenuse is equal to the sum of the squares of the lengths of the other two sides.

In this case, the lengths of the three sticks are 10 in., 24 in., and 26 in.

We can test if the triangle is a right triangle by checking if the Pythagorean theorem holds true:

[tex]10^2 + 24^2 = 26^2[/tex]

100 + 576 ≠ 676

The sum of the squares of the two shorter sides, [tex]10^2 + 24^2[/tex], is not equal to the square of the longest side, [tex]26^2[/tex]. Therefore, the given triangle does not satisfy the Pythagorean theorem and is not a right triangle.

The correct reasoning is: No, it is not a right triangle.

To know more about triangle,

https://brainly.com/question/16423125

#SPJ11

Answer:

Of the 52 cards, 4 are fives.

So the probability that a 5-card hand has no fives is:

(48/52)(47/51)(46/50)(45/49)(44/48) =

.658842 = 65.8842%

The median volume of water in the eight containers is 3.7 liters.

To find the median, we need to arrange the volumes of water in ascending order: 2.8 liters, 3.1 liters, 3.2 liters, 3.7 liters, 3.9 liters, 4.2 liters, 4.5 liters, and 5.6 liters. The median is the middle value in a sorted set of numbers. In this case, we have eight containers, so the middle value will be the fourth one when arranged in ascending order. The fourth value is 3.7 liters, which is the median volume.

The median is a measure of central tendency that helps identify the middle value in a dataset. It is especially useful when dealing with a small set of numbers or when the data contains outliers. In this case, we have arranged the volumes of water in ascending order, and the fourth value, 3.7 liters, represents the median. This means that half of the volumes are below 3.7 liters, and half are above it. The median is often used as a robust measure of the "typical" value, as it is less affected by extreme values compared to the mean.

Learn more about volume here:

https://brainly.com/question/28058531

#SPJ11

The volume of the stack of pennies is 3600 cubic millimeters.

To find the height of the stack of pennies, we need to first find the height of one penny. Since the diameter of a penny is 19 millimeters, its radius is half of that, which is 9.5 millimeters. We can use the formula for the volume of a cylinder (V = πr^2h) to find the height of one penny:

360 cubic millimeters = π(9.5 mm)^2h

h ≈ 0.99 millimeters

So the height of one penny is approximately 0.99 millimeters. To find the height of the stack of 10 pennies, we simply multiply the height of one penny by 10:

height of stack = 10 x 0.99 mm

height of stack = 9.9 millimeters

Therefore, the height of the stack of pennies is approximately 9.9 millimeters.

B. The volume of the stack of pennies can be found by multiplying the volume of one penny by the number of pennies in the stack. The volume of one penny is given as 360 cubic millimeters. Since we have 10 pennies in the stack, we can find the volume of the stack as follows:

volume of stack = volume of one penny x number of pennies in stack

volume of stack = 360 mm^3 x 10

volume of stack = 3600 cubic millimeters

Therefore, the volume of the stack of pennies is 3600 cubic millimeters.

Learn more about volume

brainly.com/question/14963310

#SPJ11

To determine the coordinate matrix of a relative to the basis b, we need to express a as a linear combination of the basis vectors in b.

That is, we need to solve the system of linear equations:

a = x(1,2) + y(-1,-1)

Rewriting this equation in terms of the individual components, we have:

0 1 -1 2 = x - y

2x - y

This gives us the system of equations:

x - y = 0

2x - y = 1

-x - y = -1

2x + y = 2

Solving this system, we get x = 1/3 and y = 1/3. Therefore, the coordinate matrix of a relative to the basis b is:

[1/3, 1/3]

To determine the coordinate matrix of a relative to the basis b', we repeat the same process. We need to express a as a linear combination of the basis vectors in b':

a = x(-4,1) + y(0,2)

Rewriting this equation in terms of the individual components, we have:

0 1 -1 2 = -4x + 0y

x + 2y

This gives us the system of equations:

-4x = 0

x + 2y = 1

-x = -1

2x + y = 2

Solving this system, we get x = 0 and y = 1/2. Therefore, the coordinate matrix of a relative to the basis b' is:

[0, 1/2]

Learn more about basis here:

https://brainly.com/question/14947252

#SPJ11

The line integral around the unit circle is 2π.

We can use Green's Theorem to evaluate the line integral. Green's Theorem states that for a vector field F = (P, Q) with continuous partial derivatives defined on a simply connected region R in the plane, the line integral along the boundary of R is equal to the double integral of the curl of F over R:

∮C P dx + Q dy = ∬R (∂Q/∂x - ∂P/∂y) dA

In this case, P = -y and Q = x, so ∂Q/∂x = 1 and ∂P/∂y = -1, and the curl of F is:

∂Q/∂x - ∂P/∂y = 1 - (-1) = 2

Since the unit circle is a simply connected region, we can apply Green's Theorem to find:

∮C -y dx + x dy = ∬R 2 dA

The region R is the unit disk, so we can use polar coordinates to evaluate the double integral:

∬R 2 dA = 2 ∫0^1 ∫0^2π r dr dθ = 2π

Therefore, the line integral around the unit circle is 2π.

Learn more about circle here:

https://brainly.com/question/11833983

#SPJ11

Let A be a given matrix and b be a given vector. The QR factorization of the matrix A involves finding two matrices Q and R, where Q is orthogonal and R is upper-triangular.

To solve the least squares problem Ax = b using QR factorization, we first find the QR factorization of A:

A = QR

Next, we express the problem as:

QRx = b

Now, we can multiply both sides by the transpose of Q (since Q is orthogonal, its transpose is its inverse):

(Q^T)QRx = (Q^T)b

This simplifies to:

Rx = (Q^T)b

Since R is an upper-triangular matrix, we can use back-substitution to solve the system Rx = (Q^T)b and find the least squares solution.

1. Compute the matrix product (Q^T)b.
2. Use back-substitution to solve the upper-triangular system Rx = (Q^T)b, starting with the last equation and working upward.

The solution x obtained through this process is the least squares solution for Ax = b.

To know more about QR factorization refer here:

https://brainly.com/question/30481086?#

#SPJ11

The equation representing a line with a slope of 7 and a y-intercept of -1 is y = 7x - 1.

In the slope-intercept form of a linear equation, y = mx + b, where m represents the slope and b represents the y-intercept. Given that the slope is 7 and the y-intercept is -1, we can substitute these values into the equation to obtain the equation of the line.

Therefore, the equation representing the line with a slope of 7 and a y-intercept of -1 is y = 7x - 1. This equation indicates that for any given value of x, y will be equal to 7 times x minus 1. The slope of 7 indicates that for every unit increase in x, y will increase by 7 units, and the y-intercept of -1 signifies that the line intersects the y-axis at the point (0, -1).

Learn more about slope here:

https://brainly.com/question/3605446

#SPJ11

The solution allows us to determine the individual consumption of Molly and Torry, with Molly eating 5 ice cream sandwiches and Torry eating 7 ice cream sandwiches.

To explain further, let's assume Torry ate "n" ice cream sandwiches in one week. When we add Molly's consumption of 5 sandwiches to Torry's "n" sandwiches, the total number of sandwiches eaten by both of them is 5 + n. According to the given information, the combined total is 12 sandwiches.

We can express this relationship in an equation:

5 + n = 12

To find the value of "n," we subtract 5 from both sides of the equation:

n = 12 - 5

n = 7

Hence, Torry ate 7 ice cream sandwiches in one week. The solution allows us to determine the individual consumption of Molly and Torry, with Molly eating 5 ice cream sandwiches and Torry eating 7 ice cream sandwiches.

Learn more about equation here:

https://brainly.com/question/12850284

#SPJ11

The dependent variable is C, and the independent variable is s.

The dependent variable is the variable that relies on other variables for its values, whereas the independent variable is the variable that is free to take any value.

Hence, the dependent and independent variables in the given equation C = 3.25s are respectively C and s.

Here, C represents the total cost, which depends on the number of shirts that need to be dry cleaned, given by s.

Therefore, the dependent variable is C, and the independent variable is s.

The equation states that for every unit increase in the number of shirts that need to be dry cleaned, the total cost increases by $3.25.

If one shirt costs $3.25 to dry clean, then two shirts cost $6.50, and so on. In the given equation, it is important to note that the coefficient of the independent variable is the rate of change in the dependent variable concerning the independent variable.

For instance, in the given equation, the coefficient of the independent variable is 3.25, which implies that the total cost would increase by $3.25 if the number of shirts that needs to be dry-cleaned increases by one.

To learn more about variables here:

https://brainly.com/question/28248724

#SPJ11

From the foot of the cliff, the distance to the boat on the sea can be calculated. The value will depend on the angle of depression and the height of the cliff.

To calculate these distances, trigonometry can be used. The tangent function relates the angle of depression to the distances involved. In this case, the tangent of the angle of depression (26.2°) is equal to the ratio of the height of the cliff (90m) to the horizontal distance to the boat.

a. To find the distance from the foot of the cliff, we can use the formula: distance = height of the cliff / tangent(angle of depression). Plugging in the values, we get distance = 90m / tan(26.2°).

b. To find the distance from the top of the cliff, we need to consider the total distance, which includes the height of the cliff. The formula for this distance is: distance = (height of the cliff + height of the boat) / tangent(angle of depression). Since the height of the boat is not provided in the question, we cannot provide a specific value for this distance without that information.

Learn more about angle here:

https://brainly.com/question/31818999

#SPJ11

The value of expression cos (A - B)  is,

cos (A - B) = (4√2 - √5) / 9

We have to given that;

sin A = 1/3 where A terminates in Quadrant 1,

And , cos B = 2/3, where B terminates in Quadrant 4.

Since, We know that;

sin² A + cos² A = 1

(1/3)² + cos²A = 1

cos²A = 1 - 1/9

cos²A = 8/9

cos A = 2√2/3

And, We know that;

sin² B + cos² B = 1

(2/3)² + sin²B = 1

sin²B = 1 - 4/9

sin²B = 5/9

sin B = √5/3

Hence, We get;

cos (A - B) = cos A cos B + sin A sin B

Substitute all the values, we get;

cos (A - B) = 2√2/3 x 2/3  + 1/3 x √5/3

cos (A - B) = 4√2/9 - √5/9

cos (A - B) = (4√2 - √5) / 9

Learn more about trigonometry visit:

https://brainly.com/question/13729598

#SPJ1

The sequence 2 − 2 · 7 + 2 · 7² − · · · + 2(−7)ⁿ =  (1 − [tex](-7)^{n+ 1}[/tex])/4. hold whenever n is a nonnegative integer using mathematical induction .

Sequence is equal to,

2 − 2 · 7 + 2 · 7² − · · · + 2(−7)ⁿ

Prove this by mathematical induction.

Base case,

When n=0, we have ,

2 = (1 - (-7)¹)/4, which is true.

Inductive step,

Assume that the formula holds for some integer k,

2 − 2 · 7 + 2 · 7² − · · · + 2[tex](-7)^{k}[/tex]= (1 − [tex](-7)^{k+ 1}[/tex])/4

Show that it also holds for k+1, .

2 − 2 · 7 + 2 · 7² − · · · + 2 [tex](-7)^{k+ 1}[/tex]) = (1 −  [tex](-7)^{k+2}[/tex]))/4

Starting with the left-hand side of the equation for k+1,

2 − 2 · 7 + 2 · 7² − · · · + 2 [tex](-7)^{k+ 1}[/tex])

= 2 − 2 · 7 + 2 · 7² − · · · + 2[tex](-7)^{k}[/tex] + 2 [tex](-7)^{k+ 1}[/tex])

Using the induction hypothesis,

Substitute (1 −  [tex](-7)^{k+ 1}[/tex])/4 for the first term in brackets,

= (1 −  [tex](-7)^{k+ 1}[/tex]))/4 + 2 [tex](-7)^{k+ 1}[/tex])

= (1 − [tex](-7)^{k+ 1}[/tex])+ 8 [tex](-7)^{k+ 1}[/tex]))/4

= (1 −  [tex](-7)^{k+2}[/tex]))/4

Therefore, by mathematical induction holds for all nonnegative integers n implies 2 − 2 · 7 + 2 · 7² − · · · + 2(−7)ⁿ =  (1 − [tex](-7)^{n+ 1}[/tex])/4.

learn more about mathematical induction  here

/brainly.com/question/29503103

#SPJ4

a): In this case, n = 12, k = 4, and p = 0.6. We need to calculate the cumulative probability up to k = 4:

P(Type I error) = P(X ≤ 4) = P(X = 0) + P(X = 1) + P(X = 2) + P(X = 3) + P(X = 4)

b): For p = 0.3:

P(Type II error | p = 0.3) = P(X ≥ 5) = P(X = 5) + P(X = 6) + ... + P(X = 12)

For p = 0.5:

P(Type II error | p = 0.5) = P(X ≥ 5) = P(X = 5) + P(X = 6) + ... + P(X = 12)

The probability of committing a Type I error, denoted as α, is the probability of rejecting the null hypothesis when it is actually true. In this case, the null hypothesis is p = 0.6.

We are given that if four or fewer out of 12 orders arrive late, the hypothesis that p = 0.6 will be rejected in favor of the alternative p < 0.6. Therefore, the Type I error occurs when the observed number of late shipments is four or fewer.

To calculate the probability of committing a Type I error, we need to find the cumulative probability of observing four or fewer late shipments under the assumption that p = 0.6.

Using the binomial distribution formula, the probability of observing k successes (late shipments) out of n trials (orders) with a success probability of p is given by:

P(X = k) = C(n, k) × [tex]p^K[/tex] × [tex](1 - p)^(n - k)[/tex]

In this case, n = 12, k = 4, and p = 0.6. We need to calculate the cumulative probability up to k = 4:

P(Type I error) = P(X ≤ 4) = P(X = 0) + P(X = 1) + P(X = 2) + P(X = 3) + P(X = 4)

Calculating each term using the binomial distribution formula and summing them up, we can find the probability of committing a Type I error.

The probability of committing a Type II error, denoted as β, is the probability of accepting the null hypothesis when it is actually false. In this case, we are given two specific alternatives: p = 0.3 and p = 0.5.

For each alternative, we need to find the probability of accepting the null hypothesis (not rejecting it) when the true proportion is actually p.

Using the same logic as in part (a), we need to find the cumulative probability of observing five or more late shipments when the true proportion is p.

For p = 0.3:

P(Type II error | p = 0.3) = P(X ≥ 5) = P(X = 5) + P(X = 6) + ... + P(X = 12)

For p = 0.5:

P(Type II error | p = 0.5) = P(X ≥ 5) = P(X = 5) + P(X = 6) + ... + P(X = 12)

By calculating these probabilities using the binomial distribution formula, we can find the probability of committing a Type II error for each specific alternative.

The calculations can be done using statistical software or tables for the binomial distribution, or you can use a calculator that supports the binomial distribution function.

Learn more about Probability.

brainly.com/question/32117953

#SPJ11

The denominator has a single first-order term the closed-loop system has a single pole at:

s = -G(s) × (Kp + Kd × s) / Ki

The transfer function from the reference input θr to the Hapkit output θ for a closed-loop system with a unity gain negative feedback and a PID controller can be derived as follows:

Let's denote the transfer function of the plant (Hapkit) by G(s) the transfer function of the PID controller by C(s) and the transfer function of the feedback path by H(s).

The closed-loop transfer function T(s) is given by:

T(s) = θ(s) / θr(s)

= G(s) × C(s) / [1 + G(s) × C(s) × H(s)]

Since the feedback path has unity gain we have H(s) = 1.

Also, the transfer function of a PID controller with proportional gain Kp, integral gain Ki and derivative gain Kd is:

C(s) = Kp + Ki/s + Kd × s

Substituting these into the expression for T(s), we get:

T(s) = θ(s) / θr(s)

= G(s) × [Kp + Ki/s + Kds] / [1 + G(s) × [Kp + Ki/s + Kds]]

Multiplying both the numerator and denominator by s, and simplifying, we get:

T(s) = θ(s) / θr(s)

= G(s) × Kps / [s + G(s) × (Kp + Ki/s + Kds)]

This is the transfer function from the reference input θr to the Hapkit output θ for the closed-loop system.

The closed-loop system has as many poles as the order of the denominator of the transfer function T(s).

Since the denominator has a single first-order term the closed-loop system has a single pole at:

s = -G(s) × (Kp + Kd × s) / Ki

The pole may change as a function of the frequency s due to the frequency dependence of G(s).

For similar questions on closed-loop system

https://brainly.com/question/14289243

#SPJ11

These events are not mutually exclusive. It is possible for Spencer to have a part-time job at Starbucks while attending college full-time.

A: Spencer has a part-time job at Starbucks. B: Spencer attends college full-time. These events are not mutually exclusive.
Events A and B are not mutually exclusive because it is possible for Spencer to have a part-time job at Starbucks while attending college full-time. Mutually exclusive events cannot occur at the same time, but in this case, both events can happen simultaneously.

learn  more about mutually exclusive events: https://brainly.com/question/12961938

#SPJ11

a. Approximately, the farmer needs to order 25.13 gallons of paint to paint the exterior of the granary.

b. Approximately, the maximum amount of grain the structure can store is 2198.17π cubic meters.

a. To calculate the surface area of the exterior of the granary, we need to find the lateral surface area of the cylinder. The formula for the lateral surface area of a cylinder is given by:

Lateral Surface Area = 2πrh

where r is the radius of the base of the cylinder and h is the height of the cylinder.

Given that the diameter of the granary is 10 meters, we can find the radius by dividing the diameter by 2:

Radius (r) = Diameter / 2 = 10m / 2 = 5m

Plugging in the values into the formula, we get:

Lateral Surface Area = 2π(5m)(28m) = 280π [tex]m^2[/tex]

Now, we can calculate the number of gallons of paint needed by dividing the surface area by the coverage of one gallon of paint:

Number of gallons of paint = Lateral Surface Area / Coverage per gallon

Number of gallons of paint = 280π [tex]m^2[/tex] / 35 [tex]m^2[/tex] = 8π gallons

Approximately, the farmer needs to order 25.13 gallons of paint to paint the exterior of the granary.

b. To determine the maximum amount of grain the structure can store, we need to calculate the volume of the cylinder. The formula for the volume of a cylinder is given by:

Volume = π[tex]r^2[/tex]h

where r is the radius of the base of the cylinder and h is the height of the cylinder.

Given that the diameter of the granary is 10 meters, we can find the radius by dividing the diameter by 2:

Radius (r) = Diameter / 2 = 10m / 2 = 5m

Plugging in the values into the formula, we get:

Volume = π(5m[tex])^2[/tex](28m) = 700π [tex]m^3[/tex]

for such more question on

https://brainly.com/question/15683939

#SPJ11

Thus, the series Σ bn^n cos nπ/n n = 1 is conditionally convergent but not absolutely convergent.

To determine whether the series Σ bn^n cos nπ/n n = 1 is absolutely convergent, conditionally convergent, or divergent, we need to apply the alternating series test and the ratio test.

First, let's use the alternating series test to check if the series is conditionally convergent. The terms of the series alternate in sign, and the absolute value of bn^n converges to 1 as n approaches infinity.

The alternating series test states that if a series has alternating terms that decrease in absolute value and approach zero, then the series is convergent. Since the terms of this series satisfy these conditions, we can conclude that the series is conditionally convergent.

Next, let's use the ratio test to check if the series is absolutely convergent. The ratio test states that if the limit of the absolute value of the ratio of consecutive terms is less than 1, then the series is absolutely convergent. Let's apply this test to the series Σ |bn|^n cos nπ/n n = 1:

|b_{n+1}|^{n+1} |cos((n+1)π/(n+1))| / |b_n|^n |cos(nπ/n)|
= |b_{n+1}| |cos(π/(n+1))| / |b_n| |cos(π/n)|

Since bn converges to 1/3, we have:
|b_{n+1}| / |b_n| → 1

Also, since the cosine function is bounded between -1 and 1, we have:
|cos(π/(n+1))| / |cos(π/n)| ≤ 1

Therefore, the limit of the absolute value of the ratio of consecutive terms is 1, which means that the series is not absolutely convergent.

In summary, the series Σ bn^n cos nπ/n n = 1 is conditionally convergent but not absolutely convergent.

Know more about the alternating series test

https://brainly.com/question/30400869

#SPJ11

The two given curves y = 7 cos x and y = 7 − 7 cos x intersect at x = π/2 and x = 3π/2. To find the area of the region between the curves on the given interval from x = 0 to x = π, we need to find the definite integral of the difference between the two curves over the given interval. Thus, the area between the curves is given by the integral of [7 − 7 cos x] − [7 cos x] from x = 0 to x = π. Simplifying the expression, we get the integral of 7(1 − cos x) from x = 0 to x = π, which evaluates to 14 square units. Therefore, the area of the region between the curves is 14 square units.

The area of the region between the curves y = 7 cos x and y = 7 − 7 cos x on the interval x = 0 to x = π is 14 square units. This is obtained by finding the definite integral of the difference between the two curves over the given interval. The two curves intersect at x = π/2 and x = 3π/2, so the area of the region between the curves is bounded by these values of x. We use the difference [7 − 7 cos x] − [7 cos x] to represent the vertical distance between the two curves at each x value on the interval and integrate this difference to find the area.

To know more about area visit:

https://brainly.com/question/1631786

#SPJ11

A meta-analysis consists of a set of statistical procedures that employ quantitative techniques to compare a specific finding across multiple studies.

Meta-analysis is a research methodology used in various disciplines, including psychology, medicine, and social sciences, to combine and analyze data from multiple independent studies on a particular topic.

It involves systematically searching for relevant studies, extracting relevant data, and applying statistical techniques to summarize and integrate the findings.

The primary purpose of a meta-analysis is to provide a quantitative summary of the available evidence by calculating effect sizes, such as mean differences or correlation coefficients, across the selected studies.

This allows researchers to examine the overall pattern of results and determine the magnitude and significance of the effect under investigation.

Meta-analysis offers several advantages over individual studies, including increased statistical power, the ability to detect small effects, and generalizability of findings across different populations or settings.

It also allows researchers to explore sources of variation or heterogeneity across studies and conduct subgroup analyses to examine potential moderators or mediators of the observed effects.

Overall, meta-analysis serves as a valuable tool in evidence-based research by providing a systematic and rigorous approach to combine and analyze data from multiple studies.

It allows researchers to draw more reliable conclusions and inform decision-making by synthesizing the collective knowledge on a specific topic.

Learn more about Meta-analysis here:

https://brainly.com/question/30382392

#SPJ11

In triangle ABC of given angles and sides, the value of sin B is 0.5523.

To solve triangle ABC, given ∠a = 43.1°, side a = 188.2, and side b = 245.8, we can use the Law of Sines to find sin B.

The Law of Sines states that for any triangle with sides a, b, c and opposite angles A, B, C, the following ratio holds:

sin A / a = sin B / b = sin C / c

We are given ∠a = 43.1°, which means angle A is 43.1°. We are also given side a = 188.2 and side b = 245.8.

Using the Law of Sines, we can write:

sin A / a = sin B / b

Substituting the known values:

sin 43.1° / 188.2 = sin B / 245.8

To find sin B, we can rearrange the equation:

sin B = (sin 43.1° / 188.2) * 245.8

Using a calculator, we can evaluate the right-hand side of the equation:

sin B ≈ 0.5523

Therefore, sin B ≈ 0.5523.

Learn more about "triangle ":

https://brainly.com/question/1058720

#SPJ11

complete question:

Solve triangle abc if ∠ a = 43.1 ° ∠a=43.1° , a = 188.2 , and b=245.8 .

sinB=

(round answer to 5 decimal places)

The cumulative probability up to 1.37 is 0.9142. The correct answer is d) 0.9142

To find P(-3.29 < Z < 1.37), where Z is a standard normal variable, we need to calculate the cumulative probability up to 1.37 and subtract the cumulative probability up to -3.29.

Using a standard normal distribution table or a calculator, we can find:

P(Z < 1.37) ≈ 0.9147 (rounded to four decimal places)

P(Z < -3.29) ≈ 0.0006 (rounded to four decimal places)

To find the desired probability, we subtract the cumulative probability up to -3.29 from the cumulative probability up to 1.37:

P(-3.29 < Z < 1.37) ≈ P(Z < 1.37) - P(Z < -3.29)

≈ 0.9147 - 0.0006

≈ 0.9141

Therefore, the correct answer is d) 0.9142

To know more about probability .

https://brainly.com/question/24756209

#SPJ11

The given system with two coupled subsystems has an undamped natural frequency of 6.714 rad/s and a damping ratio of 0.3001.

The given system consists of two coupled subsystems: a rotational system and a field-controlled motor system. The rotational system is described by the equation of motion 30 dtdt​ + 10w = T(t), where T(t) is the torque applied by an electric motor. The motor system is modeled by the equation 0.001 dtdi​ + 5i = v(t), where i is the field current in amperes and v(t) is the voltage applied to the motor.

The damping ratio of the combined system can be determined by dividing the sum of the two time constants by the undamped natural frequency, i.e. ζ = (τ1 + τ2)ωn​. Given the time constants of the rotational and motor systems as 3 seconds and 0.001 seconds respectively, and the undamped natural frequency as ωn​ = 10 rad/s, we can calculate the damping ratio as ζ = (3 + 0.001) x 10 / 10 = 0.3001.

The combined system's undamped natural frequency is determined by solving the characteristic equation of the system, which is given by (30I + 10ωs)(0.001s + 5) = 0, where I is the identity matrix. This yields the roots s = -0.1667 ± 6.714i. The undamped natural frequency is therefore ωn​ = 6.714 rad/s.

In summary, the given system with two coupled subsystems has an undamped natural frequency of 6.714 rad/s and a damping ratio of 0.3001.

Learn more on rotational sub-systems here:

https://brainly.com/question/29610872

#SPJ11

If solids in the diagram are boxes being measured for movng, the best units would be solid A. Option A

The best units to use for measuring boxes for moving are inches, because they are smaller and easier to work with than centimeters or feet.

Inches are a commonly used unit of measure, especially in the United States.

It could be argues that the best units to use depend on the situation and the standard units of measure in the location.

For larger objects like moving boxes, units such as feet or meters are most commonly used.

But inches are commonly and suitable used as the unit measurement for moving boxes.

Find more exercises on box measurements;

https://brainly.com/question/22635261

#SPJ1

Therefore, The relationship of the fluxions using Newton's rules for the given equation y^2-a^2-x√(a^2-x^2 )=0 is that the first two fluxions involve both y and z, while the third fluxion only involves y.

In order to find the relationship of the fluxions using Newton's rules for the given equation, we first need to rewrite it in terms of z. So, substituting x√(a^2-x^2 ) with z, we get y^2-a^2-z=0.

Now, let's find the first three fluxions using Newton's rules:
f(y^2-a^2-z) = 2ydy - 0 - dz
f'(y^2-a^2-z) = 2ydy - dz
f''(y^2-a^2-z) = 2ydy
From the above equations, we can see that the first and second fluxions involve both y and z, while the third fluxion only involves y.

Therefore, The relationship of the fluxions using Newton's rules for the given equation y^2-a^2-x√(a^2-x^2 )=0 is that the first two fluxions involve both y and z, while the third fluxion only involves y.

To know more about equations visit:

https://brainly.com/question/22688504

#SPJ11

The value of the length of x is 13.

We have,

The given triangle is a right triangle.

So,

Applying the Pythagorean theorem,

x² = 5² + 12²

x² = 25 + 144

x² = 169

x = √169

x = 13

Thus,

The value of the length of x is 13.

Learn more about the Pythagorean theorem here:

https://brainly.com/question/14930619

#SPJ1

Thus, the set  A∩C, contains only one element, which is 4. We write  A∩C, = {4} in set notation.

To evaluate A∩C, we will need to find the intersection of the sets A and C.

The intersection of two sets consists of the elements that are present in both sets. In this case, A = {1, 2, 4, 8, 9} and C = {3, 4, 5, 6, 7}. By comparing the two sets, we can identify the common elements.

From the given sets, we see that the only common element between them is 4. Therefore, ac = {4}.

In set notation, we write ac = {x | x ∈ a and x ∈ c}.

This means that ac is the set of all elements x such that x belongs to a and x also belongs to c. In this case, the only element that satisfies this condition is 4, so we write ac = {4}.

By using set notation, we can avoid any confusion or misunderstandings that might arise from using vague or imprecise language.

In summary, the set  A∩C, contains only one element, which is 4. We write ac = {4} in set notation.

Know more about the set notation.

https://brainly.com/question/24462379

#SPJ11

The curl of the vector field f is 1j - k.

The curl of a vector field F is given by the formula:

curl(F) = (∂Q/∂y - ∂P/∂z)i + (∂R/∂z - ∂P/∂x)j + (∂P/∂y - ∂Q/∂x)k

where F = Pi + Qj + Rk.

In this case, we have:

P = 0

Q = -y

R = 4z

So,

∂P/∂x = 0

∂Q/∂x = 0

∂R/∂x = 0

∂P/∂y = 0

∂Q/∂y = -1

∂R/∂y = 0

∂P/∂z = 0

∂Q/∂z = 0

∂R/∂z = 4

Therefore,

curl(f) = (0 - 0)i + (0 - (-1))j + (-1 - 0)k

= 1j - k

So the curl of the vector field f is 1j - k.

To know more about vector refer here:

https://brainly.com/question/29740341

#SPJ11

Answer: its either 5 or 8 kilometers