Find the surface area of a sphere that has radius 7 m.

The correct answer is D. 50% long-tailed cat with long whiskers, 50% short-tailed cat with short whiskers.

This is because the long-tailed cat with long whiskers is homozygous for the recessive allele for tail length (ww) and homozygous for the dominant allele for whisker length (TT), while the short-tailed cat with short whiskers is homozygous for the dominant allele for tail length (TT) and homozygous for the recessive allele for whisker length (ww). Therefore, all the offspring will inherit one copy of the dominant allele for tail length (T) from each parent, making them all long-tailed, but half will inherit the recessive allele for whisker length (w) from each parent, making them short-whiskered.

Know more about whisker length here:

https://brainly.com/question/2742784

#SPJ11

The diameter of the circle is 40/3 units.

We have,

Let's first recall the formulas for the area of a sector and the length of an arc of a circle:

Area of a sector with central angle θ and radius r: A = (θ/360)πr²

Length of an arc with central angle θ and radius r: L = (θ/360)2πr

We are given that the area of the sector is 5π and the arc measure is 50 degrees.

Let's denote the radius of the circle by r and the central angle of the sector by θ.

We can set up a system of equations using the formulas above:

(θ/360)πr² = 5π (since the area of the sector is 5π)

(θ/360)2πr = L (since the length of the arc is given as 50 degrees)

Simplifying these equations.

(θ/360)r² = 5 (canceling out π on both sides)

(θ/180)r = L/π

Solving for θ in the second equation.

θ = (180/π)(L/r)

Substituting this into the first equation and solving for r.

((180/π)(L/r))/360 r² = 5

(L/r) r = (5π/9)

r = (5π/9) / (L/r)

r = (5πr)/(9L)

Now we can substitute the given values for L and θ into the above expression for r:

L = (50/360)(2πr) = (5/36)πr

θ = 50 degrees = (50/180)π radians

Substituting these into the expression for r.

r = (5πr)/(9L) = (5πr)/(9*(5/36)πr) = (20/3)

Now,

The diameter of the circle is twice the radius.

2r = 2*(20/3) = 40/3

Thus,

The diameter of the circle is 40/3 units.

Learn more about Circle here:

https://brainly.com/question/11833983

#SPJ1

Answer:12cm

Step-by-step explanation: volume of a square based pyramid = base area ×height

120 = X × 10

120/10 =

12 = X

base area of square = 4× X

12= 4 × X

12/ 4 =

3= X

So , the length of its base is 3 cm

To find an increasing subsequence of maximal length, we can start by looking for the longest increasing subsequence that ends with each element in the sequence. We can keep track of the length of the longest subsequence we have found so far, and update it whenever we find a longer one.

Starting with the first element, 22, we have found an increasing subsequence of length 1. Moving on to the second element, 5, there are no increasing subsequences that end with 5 longer than the one that ends with 22. The same is true for 7 and 2. However, when we get to 23, we can add it to the increasing subsequence that ends with 22 to get a new increasing subsequence of length 2.

Continuing in this way, we can add 10 and 21 to get a subsequence of length 4. Finally, we can add 17 to get an increasing subsequence of length 5: 5, 7, 10, 21, 17.

To find a decreasing subsequence of maximal length, we can use a similar approach, but instead look for the longest decreasing subsequence that starts with each element in the sequence. Starting with 22, there are no decreasing subsequences that start with it, so we move on to 5.

The longest decreasing subsequence that starts with 5 is just 5 itself. For 7, we can add it to the decreasing subsequence that starts with 5 to get a new decreasing subsequence of length 2. Continuing in this way, we can add 3 and 2 to get a subsequence of length 4. Finally, we can add 17 to get a decreasing subsequence of length 5: 17, 21, 10, 5, 2.

In both cases, we have found subsequences of maximal length, which means that there are no longer subsequences that satisfy the condition of being increasing or decreasing. These two types of subsequences are useful in many different areas of mathematics and computer science, such as sorting algorithms and graph theory.

To learn more about subsequence, refer here:

https://brainly.com/question/18372055#

#SPJ11

Their method is not a random sample, as it did not accurately represent the nitrate levels in the entire population of mountain lakes.

The method used by the researchers to select the lakes was random, as they did not have a specific criteria for selecting the lakes. However, the method used to collect the water samples from each lake was not random, as they took only five water samples from each lake, which means that not all parts of the lake were tested. This violates the criterion of random sampling, which requires that every element in the population has an equal chance of being selected for the sample. The researchers' method of collecting nitrate levels in lake water does not result in a truly random sample. This is because they violated the criterion of equal probability of selection for each measurement. By selecting 12 mountain lakes and taking five samples from each, they created a stratified sample rather than a random one. The measurements within each lake are not independent, as they could be affected by the specific conditions of that lake. To obtain a truly random sample, the researchers should have selected 60 measurements from all mountain lakes with equal probability, ensuring that each measurement had the same chance of being included in the sample.

Learn more about population here

https://brainly.com/question/25630111

#SPJ11

Simplifying the expression, we can find the time it will take for the newer pump to drain the pool on its own.

If two pumps can drain a pool together in a certain number of hours and it takes the older pump a certain number of hours to drain the pool alone, we can determine how long it will take the newer pump to drain the pool on its own.

Let's assume that the older pump can drain the pool alone in x hours. The rate of the older pump is 1/x of the pool drained per hour. If two pumps can drain the pool together in y hours, their combined rate is 1/y of the pool drained per hour.

Now, to find the rate of the newer pump, we subtract the rate of the older pump from the combined rate of both pumps:

1/y - 1/x = 1/t

Here, t represents the time it would take for the newer pump to drain the pool on its own. By rearranging the equation, we can solve for t:

1/t = 1/y - 1/x

To find t, we can take the reciprocal of both sides of the equation:

t = 1 / (1/y - 1/x)

to learn more about equation click here:

brainly.com/question/29174899

#SPJ11

A sorority was purchasing 5 dozens of specially designed t-shirts to sell members through internet. The goods or T-shirts were business products.

Business products refer to goods or services that are purchased by businesses or organizations to be used in the production of other goods or services. These products are also known as B2B (business-to-business) products, as they are sold to other businesses rather than to consumers.

In the context of the sorority purchasing t-shirts, it is possible that they may be considered a business product if the sorority plans to resell the t-shirts to members for a profit.

Thus, the answer is business products.

For more details regarding business products, visit:

https://brainly.com/question/29673876

#SPJ1

To find the hourly wage of these automobile plant workers in 3 more years, we need to use the formula for exponential growth. The hourly wage of the automobile plant workers in 3 more years will be approximately $14.93.

A = P(1 + r)^t

Where A is the final amount, P is the initial amount, r is the growth rate, and t is the time period.

In this case, the initial amount is $7.60, the final amount is $12.84, and the time period is 9 years. To find the growth rate, we can use the formula:

r = (ln(A/P))/t

Where ln is the natural logarithm. Plugging in the values, we get:

r = (ln(12.84/7.60))/9
r = 0.0778

So the growth rate is approximately 0.0778 per year. Now we can use the formula again to find the hourly wage in 3 more years:

A = 7.60(1 + 0.0778)^12
A = $20.53

Therefore, the hourly wage of these automobile plant workers will be approximately $20.53 in 3 more years if their wages continue to grow exponentially at the same rate.

To calculate the hourly wage of the automobile plant workers in 3 more years, we need to follow these steps:

Step 1: Determine the initial wage (W0) and the final wage after 9 years (W9)
W0 = $7.60
W9 = $12.84

Step 2: Calculate the annual growth rate (r)

We know that the exponential growth formula is W = W0 * (1 + r)^t, where W is the final wage, t is the time in years, and r is the annual growth rate. We'll solve for r:
$12.84 = $7.60 * (1 + r)^9

Step 3: Solve for r
(1 + r)^9 = $12.84 / $7.60
(1 + r)^9 = 1.68947
Take the 9th root of both sides:
1 + r = (1.68947)^(1/9)
1 + r = 1.06569
Now, subtract 1 from both sides:
r = 0.06569, or 6.569% annual growth rate

Step 4: Calculate the wage in 3 more years (W12)
Now we can use the exponential growth formula to find the wage in 12 years (W12):
W12 = W0 * (1 + r)^t
W12 = $7.60 * (1 + 0.06569)^12
W12 ≈ $14.93

So, the hourly wage of the automobile plant workers in 3 more years will be approximately $14.93.

Learn more about logarithm at: brainly.com/question/30085872

#SPJ11

The best measure of center for the data is: The median is the best measure of center, and it equals 3.

In statistics, the median is a measure of central tendency that represents the value separating the higher half of a dataset from the lower half.

To find the median of a dataset, the values must first be arranged in order of magnitude. If the dataset has an odd number of values, the median is the middle value. If the dataset has an even number of values, the median is the average of the two middle values.

To determine the best measure of center for this data, we need to consider the distribution of the data. The line plot shows that the data is not symmetric, with more data points above 6 and 7 than below.

In this case, the median is the best measure of the center, because it is not affected by the extreme values in the dataset. The median is the middle value of the dataset when it is arranged in order, and in this case, the middle value is 3 which gives a median of 3.

Therefore, the best measure of the center for this data is the median, and its value is3.

Option (B) is correct.

Read more about measure of center of data at: https://brainly.com/question/15214370

#SPJ1

To construct an 86% confidence interval with 15 data points, you would use a t-score of approximately 1.761, assuming the data follows a normal distribution.

To construct an 86% confidence interval with 15 data points, we will first need to find the appropriate t-score.

The t-score is based on the t-distribution, which is used when the sample size is small (less than 30) and the population standard deviation is unknown.

The t-score depends on the desired level of confidence and the degrees of freedom, which is equal to the sample size minus 1 (15 - 1 = 14).

To find the t-score for an 86% confidence interval, we must look at a t-distribution table or use a statistical calculator. We need to find the value corresponding to 0.930 (1 - [(1 - 0.86)/2]) in the cumulative probability column and 14 degrees of freedom in the table. The appropriate t-score is approximately 1.761.

To learn more about confidence interval click here

brainly.com/question/24131141

#SPJ11

Crime rates in the UCR (Uniform Crime Report) are expressed as the number of reported crimes per 100,000 population.

This allows for a standardized comparison of crime levels across different areas and time periods, taking into account population size. The UCR presents raw figures, crime rates, and changes in both the number and rate of crime over time to provide a comprehensive view of crime trends.

This is calculated by dividing the number of reported crimes by the population of the area and multiplying the result by 100,000. This helps to standardize the data and allows for comparison across different jurisdictions and time periods. Additionally, the UCR also presents changes in crime rates over time, allowing for the identification of trends and patterns in crime.

More on UCR: https://brainly.com/question/14450134

#SPJ11

The infant's weight is 7 pounds and 10 ounces using weight conversion.

To convert the weight of the newborn from grams to pounds, we need to divide the weight by the number of grams in one pound, which is 453.59. So, 3,459 grams divided by 453.59 grams per pound is equal to 7.628 pounds.

To find the weight in ounces, we need to multiply the decimal part of the pounds by 16 (since there are 16 ounces in one pound). So, 0.628 x 16 = 10.048 ounces.

Therefore, the infant's weight is 7 pounds and 10 ounces.

It is important to note that weight conversion is often used in the medical field to monitor the health and growth of newborns. By tracking their weight in pounds and ounces, doctors can ensure that they are gaining weight at a healthy rate and are meeting their developmental milestones.

This information can also be used to make adjustments to their feeding or treatment plans if necessary. It is crucial for healthcare professionals to accurately convert weight measurements to ensure the best possible care for their patients.

To learn more about  weight conversion, refer here:

https://brainly.com/question/11429990#

#SPJ11

True, finding a random sample with a mean significantly higher than the population mean is indeed very unlikely. In a population with a mean of 20 fluid ounces and a standard deviation of 2 fluid ounces, most samples should have means close to the population mean.

A random sample is a subset of the population chosen without bias, ensuring that each member has an equal chance of being included. This process allows researchers to make inferences about the population based on the sample's characteristics.

The Central Limit Theorem (CLT) states that, for a sufficiently large sample size, the sampling distribution of the sample mean approaches a normal distribution with the same mean as the population and a standard deviation equal to the population's standard deviation divided by the square root of the sample size.

When a sample mean is far from the population mean, it is considered an outlier, which could be due to chance or systematic error in the sampling process. In most cases, a sample mean significantly different from the population mean indicates that the sample is not representative of the population, which may affect the validity of any conclusions drawn from the sample.

In summary, it is true that finding a random sample with a mean considerably higher than the population mean of 20 fluid ounces and a standard deviation of 2 fluid ounces is very unlikely. A genuinely random sample should produce a mean closer to the population mean.

Learn more about population here:

https://brainly.com/question/27991860

#SPJ11

Answer:

The best buy item is the Frito-Lay mi Variety Pack. Going for only 0.35 per item.

Step-by-step explanation:

Frito-Lay:

9.88/28 = 0.35

Unit rate is 35 cents

Pringles:

6.48/18 = 0.36

Unit rate is 36 cents

Pack of 18:

11.21/18 = 0.6

Unit rate is 60 cents

Pack of 24:

15.85/24 = 0.66

Unit rate is 66 cents

GC:

14.75/30 = 0.49

Unit rate is 49 cents

Sweet Treats:

10.75/25 = 0.43

Unit rate is 43 cents

Comparing all of this data, it can easily be seen that the Frito-Lay mi Variety Pack is the best deal you can find out of these 6 deals.

To calculate the weighted arithmetic mean price per ton, we need to multiply each price per ton by its corresponding tonnage, sum up these products, and divide by the total tonnage. Using the given information, we have:

(1,600 tons x $27.80 per ton) + (3,400 tons x $87.32 per ton) + (900 tons x $95.00 per ton) = $93,908 + $296,608 + $85,500 = $476,016

Total tonnage = 1,600 + 3,400 + 900 = 5,900

Weighted arithmetic mean price per ton = $476,016 / 5,900 = $80.51 per ton (rounded to two decimal places)

Therefore, the weighted arithmetic mean price per ton is $80.51.
Hi! To calculate the weighted arithmetic mean price per ton, you should follow these steps:

1. Multiply each price per ton by the corresponding tons of coal.
2. Add the results from step 1.
3. Divide the sum from step 2 by the total tons of coal.

Here's the calculation:

1. ($27.80 * 1,600) + ($87.32 * 3,400) + ($95.00 * 900)
2. 44,480 + 296,688 + 85,500
3. 426,668 / (1,600 + 3,400 + 900)

The weighted arithmetic mean price per ton is 426,668 / 5,900 = $72.32.

Ton know more about arithmetic visit:

https://brainly.com/question/6561461

#SPJ11

The volume of the book is 595/8 cubic inches or approximately 74.375 cubic inches.

To find the volume of the book, we need to multiply the length, width, and height of the rectangular prism. The height of the book is 8 1/2 inches, the width is 7 inches, and the thickness is 2 1/2 inches.

First, we need to convert the height to a fraction: 8 1/2 inches = 17/2 inches. Then, we can use the formula for the volume of a rectangular prism:

Volume = Length x Width x Height

Volume = 7 inches x 2 1/2 inches x 17/2 inches

To simplify this calculation, we can convert 2 1/2 inches to a fraction: 2 1/2 inches = 5/2 inches.

Volume = 7 inches x 5/2 inches x 17/2 inches

Multiplying these fractions gives:

Volume = (7 x 5 x 17) / (2 x 2 x 2)

Volume = 595 / 8 cubic inches

To learn more about volume

https://brainly.com/question/31606882

#SPJ4

The Tragedy of the Commons is used to describe when one fisherman exceeds the legal limit for a particular type of fish by one fish, the effect on the fish population might not be harmful, but if many fishermen exceed the limit by one fish, knowing that they are depleting that particular population of fish.

The commons is a situation in which individuals who have access to a resource (also known as the commons) act in their own interests and ultimately release the resource. This economic theory was first proposed by the English writer William Forster Lloyd in 1833. The speed of the resource depends on three important factors: the number of users who want to use the resource in question, the intensity of use, and the resources involved. Fishing is a classic example of the situation of different people who occur when the property is not in full possession and the resources are open. Migration of fish often makes it difficult to establish and protect the right to fish at sea, so fishing laws apply. So giving service is an example of the situation of people who share.

For more information about population , visit :

https://brainly.com/question/28103278

#SPJ4

The ordered pair solutions for the system of equations are: (-1, 0) and (5, -6).

In order to graph the solution to the given system of equations on a coordinate plane, we would use an online graphing calculator to plot the given system of equations and then take note of the point of intersection;

f(x) = x² - 5x - 6    ......equation 1.

f(x) = -x - 1 ......equation 2.

In this exercise, we would use an online graphing calculator to plot the given system of equations as shown in the graph attached below.

Based on the graph shown in the image attached below, we can logically deduce that the solution to this system of equations is the point of intersection of the lines on the graph representing each of them, which lies in Quadrant II and Quadrant IV, and it is given by the ordered pairs (-1, 0) and (5, -6).

Read more on solution and equation here: brainly.com/question/25858757

#SPJ1

The probability of choosing one green marble and then a yellow marble with replacement is 3/50.

To find the probability of choosing one green marble and then a yellow marble with replacement, we'll need to consider the following terms:
Total marbles in the bag:

There are 5 blue marbles, 2 green marbles, and 3 yellow marbles, which makes a total of 10 marbles.
Probability of choosing a green marble:

There are 2 green marbles out of the total 10 marbles, so the probability is 2/10 or 1/5.
Probability of choosing a yellow marble:

Since we are replacing the green marble, there are still 10 marbles in the bag.

There are 3 yellow marbles, so the probability is 3/10.
Now, to find the probability of both events happening in succession:
Probability (Green, then Yellow with replacement) = Probability (Green) * Probability (Yellow)
= (1/5) * (3/10)
= 3/50.

For similar question on probability.

https://brainly.com/question/29087030

#SPJ11

Answer:

a. area = 78.5

circumference = 31.4

b. area = 113.04

circumference = 37.68

Step-by-step explanation:

To find the area use:

Area = pi • r^2

They said to use 3.14 for pi.

Area = 3.14r^2

For part a, the diameter is given, 10. Radius is half of diameter. Radius is 5.

Area = 3.14•5^2

= 3.14•25

= 78.5

Same formula for area for part b. But the radius is given, 6.

area = 3.14•6^2

= 3.14 • 36

= 113.04

Circumference is

C = pi•d

part a the diameter is 10.

C = pi • 10

= 3.14 • 10

= 31.4

for part b, double the radius to find the diameter. Radius is 6, so diameter is 12.

C = pi • d

= 3.14 • 12

= 37.68

The x-intercepts of the parabola are given as follows:

x = -0.58 and x = 2.58.

The quadratic function in the context of this problem is defined as follows:

y = -2(x + p)² + q.

The axis of symmetry is the x-coordinate of the vertex, hence:

p = 1.

The range gives the y-coordinate of the vertex, hence:

q = 5.

Then the function is defined as follows:

y = -2(x + 1)² + 5.

y = -2(x² + 2x + 1) + 5

y = -2x² + 4x - 2 + 5

y = -2x² + 4x + 3.

The x-intercepts are the values of x when y = 0, hence, using a quadratic function calculator with a = -2, b = 4 and c = 3, they are given as follows:

x = -0.58 and x = 2.58.

More can be learned about quadratic functions at https://brainly.com/question/1214333

#SPJ1

To minimize problems in repeated-measures designs that can result from systematic differences between successive measurements, a researcher should use a method called counterbalancing.

Counterbalancing is a technique used in research experiments to control for the effects of order and practice on the results of the study. It involves systematically changing the order in which participants experience different conditions of the experiment to ensure that any observed effects are not simply due to the order of presentation.

For example, if a study involves testing the effects of two different drugs on a group of participants, counterbalancing would involve dividing the participants into two groups, with one group receiving drug A first followed by drug B, while the other group receives drug B first followed by drug A. This ensures that any observed effects are not simply due to the order in which the drugs were administered.

To learn more about Counterbalancing visit here:

brainly.com/question/30409242

#SPJ4

The term used in a confidence interval that accounts for the standard error of the estimator and the desired confidence level of the interval is called the "margin of error." Margin of error incorporates the variability of the sample estimator, usually measured by the standard error, and the desired confidence level, expressed as a percentage (e.g., 95% confidence level).

In a confidence interval, the margin of error is used to determine the range within which the true population parameter is likely to fall. It is calculated by multiplying the standard error by a critical value, which is determined based on the desired confidence level. For instance, in a 95% confidence interval, the critical value is typically 1.96, derived from the standard normal distribution.

By including the margin of error in the calculation, the confidence interval provides an estimate of the population parameter that accounts for the uncertainty inherent in using a sample to make inferences about a larger population. The larger the margin of error, the wider the confidence interval, indicating greater uncertainty in the estimate. Conversely, a smaller margin of error suggests a more precise estimate.

In summary, the margin of error is a crucial component of confidence intervals, as it combines the standard error of the estimator and the desired confidence level to quantify the uncertainty in the estimate and provide a range within which the true population parameter is likely to lie.

To know more about margin of error, refer to the link below:

https://brainly.com/question/17070397#

#SPJ11

To find the probability that the student will be from Kenilworth, we need to divide the number of students from Kenilworth by the total number of students in the class.

The number of students from Kenilworth is 4 girls + 5 boys = 9 students. The total number of students in the class is 11 boys from Wilmette + 4 girls from Kenilworth + 10 girls from Wilmette + 4 boys from Glencoe + 5 boys from Kenilworth + 8 girls from Glencoe = 42 students.

Therefore, the probability that the student called upon will be from Kenilworth is 9/42 or approximately 0.214 or 21.4%.
In this class, there are 4 girls from Kenilworth and 5 boys from Kenilworth, totaling 9 students from Kenilworth.

The total number of students in the class is 11 boys from Wilmette + 4 girls from Kenilworth + 10 girls from Wilmette + 4 boys from Glencoe + 5 boys from Kenilworth + 8 girls from Glencoe = 42 students.

The probability that the teacher calls upon a student from Kenilworth is the number of Kenilworth students divided by the total number of students, which is 9/42. Simplified, this probability is 3/14, or approximately 0.214.

To know more about probability click here

brainly.com/question/15124899

#SPJ11

Answer:

Option B is correct

The numerical values of the circumference and area are equal.

Step-by-step explanation:

Circumference(C) and Area (A)of the circle is given by:              ....[1]           ......[2]where, r is the radius of the circle.As per the statement:A circle has a diameter of 4 inches. We know:Diameter = 2 (radius(r))then;4 = 2rDivide both sides by 2 we have;r = 2 inchesSubstitute these in [1] and [2] we have;Use then;Therefore, the numerical values of the circumference and area are equal i.e 12.56

Answer:

Below

Step-by-step explanation:

Answer 10.1: 15

Explanation:

(-4)^2 is 16 and (-1)^3 is -1, so (-4)^2 + (-1)^3 = 16 - 1 = 15.

Answer 10.3: -23

Explanation:

(-2)^2 is 4 and -27 minus 4 is -23.

Answer 10.5: None

Explanation:

The expression is incomplete as there is no number or operation after the "^3".

Answer 10.7: 0.7

Explanation:

√0.04 is 0.2 and (0.5)^2 is 0.25, so 0.2 + 0.25 = 0.45. The square root of 0.45 is approximately 0.671.

Answer 10.9: 0.02788

Explanation:

(0.2)^3 is 0.008 and 0.027 plus 0.008 is 0.035. Raising 0.035 to the power of 1/3 gives approximately 0.315. Therefore, the final answer is approximately 0.02788.

Answer 10.2: -2018

Explanation:

Using the order of operations, we start with 62 divided by 3 which is approximately 20.67, then multiply that by -33 to get approximately -682.44.

Answer 10.4: -2

Explanation:

Empty brackets imply multiplication. Therefore, ()^2 is 0, and (-1)^3 is -1. Thus, 0 - 1 = -1.

Answer 10.6: 0.11

Explanation:

(0.1)^2 is 0.01 and (0.1)^3 is 0.001, so 0.01 + 0.001 = 0.011.

Answer 10.8: 0.38

Explanation:

0.0144 + 0.04 = 0.0544, and the square root of 0.0544 is approximately 0.2336. Subtracting (-0.2)^2 (which is 0.04) from 0.0544 gives 0.0144. Taking the square root of 0.0144 gives approximately 0.12. Finally, 0.2336 minus 0.12 is approximately 0.38.

False. If f''(x) > 0 for all real numbers except at x=a, this implies that the function is concave up everywhere except at x=a. A continuous function that is concave up has a positive second derivative, which means the graph is shaped like a "U." In other words, it is "curving" upwards.

Since the function is concave up everywhere except x=a, it indicates that the function is increasing on both sides of x=a. An absolute maximum would require the function to be increasing on one side and decreasing on the other side, forming a "peak." However, since the function is increasing on both sides of x=a, it cannot have an absolute maximum at x=a. Thus, the statement is false.

Learn more about function here :-

https://brainly.com/question/22340031

#SPJ11

To calculate the probability that the sample mean would differ from the true mean by less than 0.6 dollars, we need to use the Central Limit Theorem (CLT) since the sample size is large (n = 107).

According to the CLT, the sampling distribution of the sample mean will be approximately normally distributed, regardless of the shape of the original population distribution, when the sample size is sufficiently large.

Given that the variance of the cost of 55 gallons of ice cream is 3636 and the sample size is 107, we can calculate the standard deviation of the sampling distribution (also known as the standard error) using the formula:

Standard Error (SE) = sqrt(Variance / Sample Size)

SE = sqrt(3636 / 107)

SE ≈ 5.960

Next, we want to find the probability that the sample mean would differ from the true mean by less than 0.6 dollars. This can be interpreted as finding the probability within a certain range around the mean in a normal distribution.

To calculate this probability, we need to standardize the range by converting it into a z-score.

Z = (X - μ) / SE

where X is the value of interest (0.6 dollars in this case), μ is the true mean (3636 dollars), and SE is the standard error (5.960 dollars).

Z = (0.6 - 3636) / 5.960

Z ≈ -607.073

Since the z-score is extremely negative, the probability of the sample mean differing from the true mean by less than 0.6 dollars is almost 0.

To know more about refer here

https://brainly.com/question/31828911#

#SPJ11

A randomized controlled trial in which each subject is assigned to a combination of at least two independent variables is an example of a Factorial Design.

In statistics, a full factorial experiment is one in which all potential combinations of the levels across all of the factors are taken into account by the experimental units. A full factorial experiment has two or more factors with discrete possible values or "levels" in its design. A fully crossed design is another name for a full factorial design. Using such an experiment, the researcher can examine how each element affects the response variable as well as how different factors interact with one another.

More on Factorial Design: https://brainly.com/question/29490374

#SPJ11