Because a group is established so that each member's valence shell configuration is the same, the number of valence electrons stays constant as we proceed from top to bottom in a group.
Thus, while the valence shell changes, the valence electrons remain the same.
Valence electrons are those that are found in the outermost shell of an isolated atom of an element. Since all of the elements in a group have the same valency, there is no change in the number of valence electrons as an element moves along the group.
Over each interval, the number of valence electrons falls from left to right. Within each group, the number of valence electrons rises from top to bottom. Group 9 elements have nine valence electrons in total. Group 18 contains the elements with the greatest valence electrons.
To learn more about Valence electrons from given link
https://brainly.com/question/371590
#SPJ1
On the diagram of the nitrogen cycle, which number represents nitrite (NO2)?
A) 1
B) 2
C) 3
D) 4
On the diagram of the nitrogen cycle, option C number 3 represents nitrite (NO2)
The Nitrogen Cycle is the process by which nitrogen is converted between its various forms, such as nitrogen gas, ammonia, nitrite, and nitrate, in the environment. Nitrogen gas makes up 78% of the Earth's atmosphere, but it is not readily available to most living organisms in that form. The Nitrogen Cycle involves several key steps, including nitrogen fixation, nitrification, and denitrification. Nitrogen fixation is the process by which nitrogen gas is converted into ammonia by nitrogen-fixing bacteria. Nitrification is the process by which ammonia is converted into nitrite and nitrate by nitrifying bacteria.
Learn more about Nitrogen Cycle here:
https://brainly.com/question/24046879
#SPJ4
Draw the organic product(s) of the reaction of acetophenone with H2NNH2, KOH.
If no reaction occurs, tell OWL by drawing ethane (CH3CH3).
Do not separate two structures with a + sign.
Answer:
From Wolff Kishner Reduction we can say that the product thus formed will be ethylbenzene.
Explanation:We know that acetophenone has (COCH3) attach to it as a functional group. When it reacts with hydrazine that is (NH2NH2) in the presence of a strong base such as KOH and heat, an intermediate known as hydrazone is formed. Hydrazone are a cousin of imines. Here the oxygen gets replaced with hydrazine and water is released. Then after deprotonation of NH we have protonation at carbon of the functional group. Then we again have deprotonation of NH and finally N2 is released and we have a protonation of carbon which results in ethylbenzene.
To know more about Wolff Kishner Reduction:https://brainly.com/question/15408743
#SPJ4
a chemist wishes to analyze the caco3 content of an antacid tablet by reaction with hcl. the tablet is weighed, and the volume of hcl required to react with the tablet is measured. which of the following statements correctly describe the assumptions that must be made in order to draw a scientifically valid conclusion from the data? (select all that apply.)
It is anticipated that none of the other compounds in the antacid tablet would interact with the HCl. It is required to assume that it is feasible to fairly accurately estimate the volume of HCl. The chemist must evaluate more than one tablet to obtain a more accurate result. Hence all the statements are true.
In order to treat indigestion and heartburn, antacids work to balance out the acid in your stomach. Without a prescription, you can get them from pharmacies and stores as liquid or chewable tablets.
Calcium carbonate is used to treat illnesses brought on by excessive stomach acid, such as heartburn, indigestion, upset stomach, and others. Lowering the level of gastric acid. It is a member of the antacid class of drugs. Additionally, it might be applied to raise your body's calcium levels. Calcium is a mineral that is crucial for developing strong bones and keeping the heart healthy.
To know more about antacids
brainly.com/question/28187760
#SPJ4
A chemist wants to use a reaction with Hcl to determine the caco3 concentration of an antacid tablet. The volume of Hcl needed to react with the pill is calculated after weighing the tablet. Which of the following statements most accurately describes the presumptions that need to be made in order to interpret the data in a way that is scientifically sound? (Check every box that applies.)
1. It is expected that the HCl won't interact with any other ingredients in the antacid tablet.
2. It is necessary to presume that it is possible to quantify the volume of HCl fairly accurately.
3. To get a more precise result, the chemist needs to examine more than one tablet.
Calculate the volume in milliliters of a 0.595M iron(II) bromide solution that contains 100. g of iron(II) bromide . Round your answer to significant digits.
The volume, in milliliters of 0.595 M iron (II) bromide that will contain 100 g of the substance will be 779.3 mL.
Molarity problemThe molarity of a solution is the ratio of the mole of solutes to the volume of the solution. Mathematically:
Molarity = mole/volume
Also, mole = mass/molar mass
Thus, 100 g of iron (II) bromide (molar mass = 215.65 g/mol) would be:
100/215.65 = 0.4637 mol
Making the volume of the subject from the equation above:
Volume = mole/molarity
= 0.4637/0.595
= 0.7793 liters
In milliliters, 0.7793 liters = 0.7793 x 1000 = 779.3 mL
Thus, the volume of the solution would be 779.3 mL.
More on molarity-related problems can be found here: https://brainly.com/question/15421287
#SPJ1
Part A The decomposition of HI(g) is represented by the equation In which bulb would you expect the composition of gases to be closest to equilibrium? O bulb 1 2HI(g) =H2(g) +12(g) The following experiment was devised to determine the equilibrium constant of the reaction O bulb 2 O bulb 3 HI(g) is introduced into five identical 400-cm' glass bulbs, and the five bulbs are maintained at 623 K.The amount of Iz produced over time is measured by opening each bulb and titrating the contents with 0.0150 M Na2S2O3(aq). The reaction of I, with the titrant is O bulb 4 O bulb 5 12 +2Na2S2O3-Na2S406 + 2NaI Submit Previous Answers Correct You have enough information to calculate the value of Q at each time increme Part B What is the value of Kc for the decomposition of HI at 623 K? Express your answer numerically. View Available Hint(s) EVO AE ? Kc =
Methane and ethane, two saturated light paraffins that are gaseous in an atmosphere, make up the majority of the hydrocarbon mixture that makes up natural gas.
What is gases?The percentages of nitrogen, oxygen, argon and other gases in the atmosphere of the Earth are roughly 78%, 21%, 0.9 percent, and 0.1%, respectively. Other gases that make up the final 0.1 percent include trace amounts of carbon dioxide, methane, water vapor, and neon. Gases are substances that can exist as a gas in one atmosphere of pressure. The 11 gases are Nitrogen, Hydrogen, Chlorine, Fluorine, Argon, Neon, Krypton, Radon, Xenon, and Oxygen. Given that they are all elements, these are known as pure gases.
Here,
The majority of the hydrocarbon mixture that makes up natural gas is made up of methane and ethane, two saturated light paraffins that are gaseous in an atmosphere.
To know more about oxygen,
brainly.com/question/27548761
#SPJ4
Identify the indicated glycosidic linkages in the blood group B saccharide that is drawn below.
The disacharide has a beta 1,4 glycosidic bond as its type of connection. Disaccharides have two different kinds of glycosidic linkages: alpha 1,4 glycosidic bonds and beta 1,4 glycosidic bonds.
What is a glycosidic linkage, for instance?The term "glycosidic linkage" describes the connection made between two monosaccharide units via an oxygen atom following the removal of a water molecule. For instance, the sucrose molecule contains a glycosidic bond that connects the two monosaccharide units, -glucose and -fructose.
What kinds of links contain glycosidic molecules?There are two different kinds of glycosidic bonds: 1,4 alpha and 1,4 beta. When the carbon-1's OH is below the glucose ring, 1,4 alpha glycosidic bonds form, and 1,4 beta glycosidic bonds,
To know more about glycosidic linkages visit:
https://brainly.com/question/28459643
#SPJ4
draw the major product(s) of electrophilic chlorination of o-xylene.
The major product(s) of electrophilic chlorination of o-xylene is attached below.
What is electrophilic chlorination?Among the most frequently used chemical processes are those in which an electrophilic chlorine atom is transferred from a chlorinating agent to a nucleophilic substrate. Microscale organic synthesis is one example of an application, while multitonnage scale industrial applications are another.
While chlorine (Cl) gains a partial negative charge when attached to carbon, carbon gains a partial positive charge as a result. Here, the positively charged Carbon will act as the electrophile ( C ).
Electrons in the chlorine-chlorine bond are repelled as a chlorine molecule approaches the benzene ring by the ring's delocalized electrons. Chlorine functions as an electrophile thanks to its slightly positive end.
To know more about chlorination visit:
https://brainly.com/question/26831851
#SPJ4
TRUE/FALSE. the heat capacity is typically ignored when deriving boundary conditions for the thermal energy equation
This assertion is false. When determining the boundary conditions for the thermal energy equation, the heat capacity is typically taken into consideration.
The proportion of heat a material can absorb to a change in temperature is known as heat capacity. In terms of the actual amount of material being taken into account, which is most frequently a mole, it is typically stated as calories per degree (the molecular weight in grams).
Specific heat is the heat capacity expressed in calories per gram. The definition of a calorie is based on the fact that one calorie is equal to one degree Celsius of water's specific heat.
Learn more about heat capacity:
https://brainly.com/question/28302909
#SPJ4
Predict the organic products from reaction of 2-pentyne with 1 equiv HCl
The products from the reaction of 2-pentyne with 1 equiv HCl are attached below.
What is 2-pentyne and what are some uses for 2-Pentyne?Uses. Palladium nanoparticles supported on bacterial biomass, known as bio-Pd, were tested for their catalytic activity using 2-Pentyne.
There are a total of 4 carbon atoms present because linear sp-hybridized orbitals overlap with 1 and 4 carbon sp3 hybridised orbitals along their axes.
It is possible to create 2-pentyne by rearranging 1-pentyne in a solution of ethanolic potassium hydroxide or NaNH₂/NH₃.
We must understand that 1-pentyne is a terminal alkyne and would react with Tollens reagent, whereas 2-pentyne is an internal alkyne and would not react with Tollens reagent. Therefore, using the Silver mirror test, we can distinguish between 1-pentyne and 2-pentyne.
To know more about 2-pentyne visit:
https://brainly.com/question/10366676
#SPJ4
Part A How many of the following molecules contain at least one pi bond? C2H6. Cl 2 CO, C2 Cl 4, HCN O 4
O 1
O 2
O 0
O 3
2 – C2H6 and HCN O 4 contain at least one pi bond.
What is molecules?Molecules are the smallest unit of any chemical element or compound that has the properties of that substance. They are made up of atoms bonded together in various combinations, and have a definite chemical structure and composition. Molecules can be made up of single atoms, such as oxygen (O2), or of different types of atoms, such as water (H2O). Molecules are the building blocks of all matter, and are the basis of all living and non-living things.
C2Cl4 and Cl2CO do not contain any pi bonds. Pi bonds are formed by the overlap of atomic orbitals between two atoms. C2H6 and HCN O 4 contain double bonds between the atoms, which are made up of pi bonds. C2Cl4 and Cl2CO do not have any double bonds, so they do not contain any pi bonds.
To know more about molecules click-
https://brainly.com/question/26044300
#SPJ4
Complete the following roadmap for calculating the molality of a solution from mass of solute X - multiply by volume of solvent (L) - mulliply by mass ol solvent (kg)
- multiply by molar mass of X (glmol) - multiply by density of X (glmL) - divide by volume of solvent (L) - divide by density of X (glmL) - divide by mass of solvent (kg)
- multiply by molarity of X (Movl)
- divide by molar mass ol X (glmol)
- divide by molarity of X (moVL) mass(g) of X ...|...
amount(mol) of X
...|....
molality(m) of X solution
The molality of a solution is defined as the number of moles of a solute per kilogram of solvent. It depends on the mass of the solvent. It is denoted by m. It is also called Molal Concentration.
What is Molality?Molarity (M), which is determined by dividing the solute's mass in moles by the volume of the solution in litres, is the most widely used unit to express solution concentration: litres of solution/moles of solute equals M.
The following equation can be used to determine the molality: m = (Number of moles of the solute)/ (Mass of the solution in litres.) Molality is measured in kg/mol. The terms molality and molal concentration are interchangeable. The equation for calculating molality,
m = (Moles of the Solute, in Number)/ (Mass of the solution in litres.)
Molality is measured in kg/mol.Molality has an advantage over molarity in that it is unaffected by changes in temperature and pressure because it is determined based on mass rather than volume.
To learn more about Molality refer to:
https://brainly.com/question/24065939
#SPJ4
Determine the average rate of change of B from t=0 to t=362 s.
A yields 2B
time(s): 0, 181, 362
Concentration of A (M): 0.170, 0.425, 0.140
Answer must be in M/s
The average rate of change of B from t=0 to t=362 s is [tex]0.001883 M/s.[/tex]
How to find the average rate of change?The average rate of change of B can be determined using the formula:
rate = (change in concentration of B) / (change in time)
We can calculate the change in concentration of B by subtracting the initial concentration of B from the final concentration of B:
change in concentration of B = final concentration of B - initial concentration of B
We can calculate the change in time by subtracting the initial time from the final time:
change in time = final time - initial time
We can use the stoichiometry of the reaction to convert the concentration of A to the concentration of B:
2A -> B
change in concentration of B = (2 * change in concentration of A)
We can use this information to calculate the average rate of change of B from t=0 to t=362 s:
change in concentration of B = [tex](2 * (0.425 M - 0.170 M)) = 0.680 M[/tex]
change in time = [tex]362 s - 0 s = 362 s[/tex]
rate = [tex](0.680 M) / (362 s) = 0.001883 M/s[/tex]
Therefore, the average rate of change of B from t=0 to t=362 s is [tex]0.001883 M/s.[/tex]
To know more about average rate of change visit: https://brainly.com/question/28744270
#SPJ4
2-hexyne will produce a single product upon mercury(ii)-catalyzed hydration.
A. True
B. False
classification of matter: after a series of chemical analysis, it was determined that an unknown sample contains three types of atoms, a, b and c. atoms a and b are found to be bound together in the sample, where as atom c is by itself. th unknown sample is also partly gas, and partly solid, with the solid containing a and b.
The correct option is Option A - A Heterogeneous mixture
As it is given that the sample is partly gas (made up of C) and partly solid (made up of A & B), the unknown sample may be a heterogenous mixture (gas C + solid A-B), like smog (smoke + fog).
Chemically speaking, matter can be divided into pure substances and mixtures. Elements and compounds can be created from pure material. The two types of mixtures are heterogeneous and homogenous.
Based on their physical and chemical properties, materials can be grouped. Matter is anything that has mass and space. Any mix of gas, liquid, and solid material is possible. When a substance changes from one state of matter to another without changing its chemical composition, this is referred to as a physical transformation.
For such more question on solid:
brainly.com/question/5247691
#SPJ4
The following question may be like this:
Classification of matter: after a series of chemical analysis, it was determined that an unknown sample contains three types of atoms, a, b and c. atoms a and b are found to be bound together in the sample, where as atom c is by itself. the unknown sample is also partly gas, and partly solid, with the solid containing a and b.
Based on the above information, the unknown sample is
a heterogeneous mixture a homogeneous mixture a pure substance, and it is a compound a pure substance, and it is an elementThe unknown sample is a heterogeneous mixture, that is explained in the below section.
As it is given that the sample is partly gas (made up of C) and partly solid (made up of A & B), the unknown sample may be a heterogenous mixture (gas C + solid A-B), like smog (smoke + fog).
The matter can be classified into pure substances and mixtures. Elements and compounds can be created from pure material. The two types of mixtures are heterogeneous and homogenous.
Based on their physical and chemical properties, materials can be grouped. Matter is anything that has mass and space. Any mix of gas, liquid, and solid material is possible. When a substance changes from one state of matter to another without changing its chemical composition, this is referred to as a physical transformation.
To learn more about heterogeneous mixture check the link below-
https://brainly.com/question/1869437
#SPJ4
Complete question-
Classification of matter: after a series of chemical analysis, it was determined that an unknown sample contains three types of atoms, a, b and c. atoms a and b are found to be bound together in the sample, where as atom c is by itself. the unknown sample is also partly gas, and partly solid, with the solid containing a and b.
Based on the above information, the unknown sample is
a heterogeneous mixture
a homogeneous mixture
a pure substance, and it is a compound
a pure substance, and it is an element
What osmotic pressure (in atmospheres) would you expect for each of the following solutions
5.18g of NaCl in 342.5mL of aqueous solution at 58C
and
5.95g of sodium acetate, CH3CO2Na, in 52.5mL of aqueous solution at 20?C
The osmotic pressure of solution 5.18g of NaCl in 342.5mL of aqueous solution at 58°C is 14.077 atm and 5.95g of sodium acetate, CH₃CO₂Na, in 52.5mL of aqueous solution at 20°C is 66.441 atm
What is an easy way to define osmotic pressure?Osmotic pressure is the amount of force required to stop fluid flow on the solution side of a semipermeable membrane when a solution is being separated from pure water.
Moles NaCl = 5.18 g/ 58.44 g/mol= 0.0886
Molarity = 0.0886 mol / 0.3425 L=0.259M
i ( Vant'Hoff factor) = 2
Osmotic pressure = CRTi = 0.259 x 0.08206 x 331 K x 2 = 14.077 atm
Moles CH₃COONa = 5.95 g/ 82.036 g/mol= 0.0725
M = 0.0725 / 0.0525 L=1.381
i = 2
osmotic pressure = 1.381 x 0.08206 x 293 K x 2 = 66.441 atm.
To know more about osmotic pressure visit:
https://brainly.com/question/29823250
#SPJ4
Step 6: Measure Pressure and Volume with the Book
and 1 kg of Weight
Total the mass on the syringe. Record it in the
correct row of the data table.
kg
DONE
4
O-
01
Click and drag weights to change the pressure.
Click the syringe to zoom in and see the volume.
Total mass on the syringe is 1.498 Kg . To find the total mass of a solution, we need to add the mass of the solute to the mass of the solvent.
What in chemistry is a solute?A solute is something that a solvent can disintegrate in order to make a solution out of. A solute can take many different forms. It could be either a material, fluid, or vapour. The solute is separated and dispersed among its molecules adequately by the solvent, or substance, which induces the solute to dissolve.
pressure = 1.18
volume of the gas in the syringe. we are estimating it to the nearest 0.5 mL is 43.5 mL.
Product of Pressure and volume is 51.3
To know more about syringe visit :-
https://brainly.com/question/20320556
#SPJ1
A dime weighs 2.5 g. What is the dollar value of 1 kg of dimes?
A dime weighs 2.5 g. $40 is the dollar value of 1 kg of dimes.
What is Dime?In American use, a dime is a 10-cent coin that is officially referred to as "one dime" and is worth one-tenth of a dollar. By virtue of the Coinage Act of 1792, the denomination was initially approved.
The dime, with dimensions of 0.705 inches (17.91 millimeters) in diameter and 0.053 inches (1.35 mm) in thickness, has the lowest diameter and is the thinnest of all U.S. coins now in circulation.
The term "dime" is derived from the Old French disme (modern French dîme), which means "tenth part" or "tithe" and is derived from the Latin decima [pars]. The only American currency now in widespread use that doesn't have a dollar or cent value is the dime. The cost of manufacturing a dime in 2011 was 5.65 cents. It costs ten cents to buy a dime. The value of a penny, often known as a one-cent coin, is one cent. A dime coin is equivalent to 10 one-cent coins in value (pennies).
Given that,
weights of Dime = 2.5 gm
Now, 2.5 g x 10 dimes = 25 gm
So, 1 kg = 1000 gm
Thus, 1000 / 25 = 4000 cents
4000 cents = $40
To know more about dime refer to:
https://brainly.com/question/14477884
#SPJ4
10) The two organic compounds shown below will differ in which physical
properties?
OH
CH3
OH
OH
CH3
OH
A. Optical rotation only.
B. Nuclear magnetic resonance spectra only.
C. Nuclear magnetic resonance spectra and optical rotation.
D. They will have identical physical properties.
An organic compound's physical characteristics are determined by the alkyl portion (carbon chain), but its chemical characteristics are determined by the functional group.
What characteristics do organic substances have? What makes them different from one another?The melting and boiling points of organic molecules are comparatively low. The sort of attraction forces used in each situation to retain the particles close to one another is the cause of these variations.
What are the physical characteristics of organic substances and what do they mean?The boiling point and solubility of organic molecules are two highly typical physical characteristics. The capacity of a material to dissolve in a solution is known as solubility. Density is another physical characteristic.
To know more about Functional groups visit:
brainly.com/question/14618322
#SPJ1
What compound exhibits only two signals in its 1H NMR spectrum, a triplet and a quintet? A) BrCH2CH2CH2Br B) BrCH2CH2CH2C C) (CH3)2CHCH(CH3)2 D) CH3CH2CH2CH3 E) (CH3)2CHOCH(CH32
BrCH2CH2CH2Br exhibits only two signals in its 1H NMR spectrum, a triplet and a quintet.
What is NMR spectrum?Nuclear magnetic resonance spectroscopy, often known as NMR spectroscopy or magnetic resonance spectroscopy, is a spectroscopic method used to study the magnetic fields around atomic nuclei. Nuclear Magnetic Resonance Spectroscopy is an abbreviation for Nuclear Magnetic Resonance Spectroscopy. The study of molecules using nuclear magnetic resonance (NMR) spectroscopy involves recording the interaction of radiofrequency (Rf) electromagnetic radiations with the nuclei of molecules put in a high magnetic field. Nuclear magnetic resonance spectroscopy (NMR spectroscopy) or magnetic resonance spectroscopy (MRS) is a spectroscopic method used to study the magnetic fields around atomic nuclei.
Here,
BrCH2CH2CH2Br's 1H NMR spectrum contains just two signals, a triplet and a quint.
To know more about NMR spectrum,
https://brainly.com/question/29389817
#SPJ4
Label the various areas in the molecular orbital diagram by moving the labels onto the diagram. v 2nd attempt A empty molecular orbitals B occupied molecular orbitals C overlap D valence band
E conduction band
The conduction band in the molecular orbital diagram because it's an electron occupying the valence bound.
What is molecular orbital diagram?Because an electron occupies the valence bound, the conduction band in the molecular orbital diagram. A molecular orbital diagram, also known as a MO diagram, is a qualitative descriptive tool used to describe chemical bonding in molecules using molecular orbital theory in general and the linear combination of atomic orbitals approach in particular. A molecular orbital diagram is used to study the bonding of a diatomic molecule. MO diagrams may be used to identify the magnetic characteristics of a molecule and how they change with ionisation. They also show the bond order of the molecule, or how many bonds are shared between the two atoms.
Here,
Because an electron occupies the valence bound, the conduction band in the molecular orbital diagram.
To know more about molecular orbital diagram,
https://brainly.com/question/18369905
#SPJ4
if pressure of a gas sample is quadrupled and the absolute temperature is doubled what factor does the volume of the sample change
To determine the volume factor change, we must make V2 the focus of the equation. Therefore, the volume factor change is (c) 1/2.
If the temperature rises four times, how will the pressure change?As the Kelvin temperature increases, the pressure increases. Direct proportionality governs the connection between the two sums.
When the temperature in Kelvin increases, the pressure of the gas will increase fourfold.
What is the fourth power of the absolute temperature?According to the Stefan-Boltzmann law, an object's total radiant heat production .
and absolute temperature are inversely related.
Learn about the Boltzmann Law.
Visit
https://brainly.com/question/14677904
#SPJ1
Atoms X, Y, Z, and R have the following nuclear compositions: Which two are isotopes?
Atoms X, Y, Z, and R have the following nuclear compositions. In the following nuclear compositions The isotopes are 410186 X and 412186 Z.
In this case, 186 is an atomic number shared by both isotopes. Isotopes are elements that share the same atomic number but have different mass numbers. Isotopes are atoms of the same element with the same number of protons but a different number of neutrons in their nucleus. This means that while isotopes of the same element have the same atomic number, they have different atomic masses. Isotopes are chemically identical because an element's chemical properties are determined by the number of protons in its nucleus (atomic number). Isotopes, on the other hand, can have varying physical and nuclear properties, such as decay rate, melting point, and stability.
Learn more about atomic masses here:
https://brainly.com/question/17067547
#SPJ4
The complete question is :
Atoms X, Y, Z, and R have the following nuclear compositions: Which two are isotopes?
410 X 186, 410 Y 183, 412 Z 186, 412 R 185
Name the organic product of the following reaction
The organic product of the following reaction is called benzene which has chemical formula C₆ H₆
What is benzene?The organic compound benzene has the molecular formula C6H6 and is made up of six carbon atoms joined together in a planar ring by one hydrogen atom. Benzene is a hydrocarbon because it only contains carbon and hydrogen atoms.
At room temperature, benzene is a chemical that is either colorless or a light yellow liquid. It is highly flammable and has a pleasant scent. Benzene quickly dissipates into the air. Its vapor can sink into low-lying areas because it is heavier than air.
What is benzene commonly known by?The organic compound benzene, also known as phenylene, has the molecular formula C6H6. Each of the six carbon atoms in the benzene molecule is attached to a hydrogen atom in a planar ring. Benzene is a hydrocarbon because it only has carbon and hydrogen atoms.
Learn more about benzene:
brainly.com/question/6028840
#SPJ1
most of the body\'s excess nitrogen is excreted as urea. draw urea.
In addition to being a starting point for the production of polymers and pharmaceuticals, urea is also utilized as a fertiliser and feed additive.
What is urea used for?In addition to being a starting point for the production of polymers and pharmaceuticals, urea is also utilized as a fertiliser and feed additive. An organic substance having the chemical formula CO(NH2)2, urea is also referred to as carbamide. Two amino groups are linked by a carbonyl functional group to form this amide. As a result, it is carbamic acid's most basic amide. The main organic component of human urine is urea, also known as carbamide, a waste product of many living things. This is due to the fact that it comes at the end of a series of processes that degrade the proteins' building blocks, the amino acids. Urea, commonly known as carbamide, is a safe, practical substance with a lengthy history.To learn more about urea refer to:
https://brainly.com/question/14718113
#SPJ4
the structures of maltose and trehalose are shown below. compare and contrast these carbohydrates.
Comparing the maltose and trehalose, both are carbohydrates, having different property, structures, and properties, discussing the property below:-
Maltose:-
Maltose is a disaccharide composed of two glucose units linked by an α-1,4-glycosidic bond. It is formed by the hydrolysis of starch, and is the second product of the hydrolysis of glycogen. Carbohydrates Maltose is sweet, but less sweet than glucose. Maltose is commonly used in brewing, baking and confectionery.
Trehalose:-
Trehalose is a disaccharide composed of two glucose units linked by an α,α-1,1-glycosidic bond. It is found in many organisms, including bacteria, fungi, plants, and some insects. Trehalose is sweet and is used as a sugar substitute. It is also used as a food additive, as well as in the production of some drugs and cosmetics.
In summary, Maltose and Trehalose are both disaccharides composed of glucose units, but they have different glycosidic bond linkage and different properties. Maltose is formed by the hydrolysis of starch and is less sweet than glucose, it is used in brewing, baking and confectionery. Trehalose is found in many organisms, it is used as a sugar substitute and a food additive, as well as in the production of some drugs and cosmetics.
To know more about carbohydrates please refer: https://brainly.com/question/29775112
#SPJ4
Question - the structures of maltose and trehalose are shown below. compare and contrast these carbohydrates. The structure or figure is attached below.
You have 100 mL of a 6 M solution of NaCI and you need to dilute it to 400 mL. What is the molarity of the new solution?
Answer: 1.5 M
Explanation:
In order to find the molarity of the new solution, we need to use the formula M1V1 = M2V2, where M1 is the initial molarity, V1 is the initial volume, M2 is the final molarity, and V2 is the final volume.
Given that the initial volume is 100 mL and the initial molarity is 6 M, we can plug in the values and solve for M2:
6 M x 100 mL = M2 x 400 mL
M2 = (6 M x 100 mL) / 400 mL
M2 = 1.5 M
So the new solution will have a molarity of 1.5 M.
Draw the form of malonic acid that is expected to predominate at physiological pH.
At physiological pH, malonic acid is expected to exist predominantly as its conjugate base, malonate, which is a dianion with the molecular formula C3H2O4^2-.
What is molanic acid?Molanic acid is an organic acid with the chemical formula C2H4O2. It is an intermediate in the metabolism of carbohydrates, and is formed when glucose is oxidized by enzymes such as glucose dehydrogenase. Molanic acid is a colorless liquid with a slightly sweet smell, and is soluble in water, alcohol, and ether. It has a molecular weight of 60.05 g/mol and is a precursor to the other organic acids such as lactic acid, malic acid, and citric acid. Molanic acid is used in the food industry as a preservative, and is also used in the manufacture of pharmaceuticals, dyes, and perfumes.
This dianion is a symmetric molecule with a planar triangular structure, with a central carbon atom double-bonded to two oxygen atoms and single-bonded to two additional oxygen atoms. The two negative charges are localized on the two outer oxygen atoms.
To know more about molanic acid click-
https://brainly.com/question/15088490
#SPJ4
This energy diagram shows the allowed energy levels of an electron in a certain atom or molecule: Use this diagram to complete the table below.
The atom's ground state is A. There are two levels of excitement. The wavelength with the shortest transition is A to B. B - C is the transition with the longest wavelength.
A diagram of energy is what?It is possible to see the progression of a chemical process using an energy diagram. The energy disparity between the reactants and products of a process is better understood with this graphic. Additionally, it shows how energy rises as the active compound develops.
What use do energy graphs serve?An energy diagram, which illustrates how the potential energy of the starting state and the potential energy of the end state relate to one another, can be used to depict a physical or chemical process.
To know more about energy diagram visit:
https://brainly.com/question/12078312
#SPJ4
Indicate the molecu lar geometry around the central atom of each of the following species: CF4 Select NCI3 [Select) So2 [Select] the silicon atom in disilane (Si is bonded to Si) SisHe Select the carbon atom in urea (NH2)>CO (C is bonded to O, N and N) [Select]
Each of the following species has a tetraherdal, trigonal pyramidal, bent, tetraherdal, or trigonal planar molecular geometry centered on the central atom.
What is an example of an atom definition?An atom is the fundamental unit of chemistry. It is the tiniest portion of matter where electric charges particles might escape. It is really the small material with properties resembling chemical elements.
What makes it an atom, and why?But when it refers to the name atom, we must travel back to 400 B.C. ancient Greece. This Greek word atomos, meaning meaning "uncuttable," was proposed by Democritus, a renowned philosopher. As a result, as he stated, all substance might be reduced to discrete, tiny pieces, called atomos.
To know more about Atom visit:
https://brainly.com/question/26952570
#SPJ4
What is the most similar element to an element with the atomic number of 113 and the outer energy level of 3?
The most similar element to an element is Nihonium.
What is a chemical element?A chemical element is a chemical substance that cannot be broken down into other substances. Atoms are the fundamental building blocks of chemical elements, and the number of protons in each atom's nucleus determines which chemical element it belongs to.
Furthermore, a substance whose atoms all contain the same number of protons is said to constitute an element; alternatively, all the atoms of a certain element must contain the same number of protons. Chemical reactions cannot degrade elements since they are the simplest chemical forms.
Learn more about chemical elements here:
https://brainly.com/question/28376204
#SPJ1