Diazomethane has the molecular formula CH2N2. Draw the preferred Lewis structure for diazomethane and assign formal charges to all atoms, if any.

Answer: The given pairs of electrons most likely reside in [tex]sp^{2}[/tex] type of orbital.

Explanation:

As it is given that two lone pair of electrons are present on the oxygen atom of ketone (such as cyclohexanone).

Also, there will be one bond pair between carbon and oxygen atom.

Hence, total electrons present in the domain are as follows.

2 lone pairs + 1 bon pair of electron = 3 electron domains

This means that there will be [tex]sp^{2}[/tex] type of orbital present.

Thus, we can conclude that given pairs of electrons most likely reside in [tex]sp^{2}[/tex] type of orbital.

Answer:

Charles's law states that the volume of a gas is directly proportional to the temperature of the gas, while pressure and number Of moles are kept constant (V/T = constant). All temperatures must be in kelvins when used in gas law calculations.

Boyle's law states that the volume of the gas varies inversely to the pressure on the gas, while temperature and number of moles are kept constant (PV = constant).

Avogadro's law states that the volume of a gas is directly proportional to the number of moles of the gas, while pressure and temperature are kept constant (V/n constant).

Explanation:

Charles's law says that at constant pressure, as the temperature increases, the volume of the gas increases and as the temperature decreases, the volume of the gas decreases. This is because "temperature" means movement of the particles. So, the greater the movement of the particles (temperature), the greater the volume of the gas. Then, Charles's law indicates that the volume is directly proportional to the temperature of the gas.

So, Charles's law states that the volume of a gas is directly proportional to the temperature of the gas, while pressure and number Of moles are kept constant (V/T = constant). All temperatures must be in kelvins when used in gas law calculations.

As the volume increases, the gas particles (atoms or molecules) take longer to reach the walls of the container and therefore collide with them fewer times per unit of time. This means that the pressure will be lower because it represents the frequency of collisions of the gas against the walls. In this way pressure and volume are related, determining Boyle's law which says:

"The volume occupied by a given gaseous mass at constant temperature is inversely proportional to pressure"

So, Boyle's law states that the volume of the gas varies inversely to the pressure on the gas, while temperature and number of moles are kept constant (PV = constant).

Avogadro's Law is a gas law that relates the volume and quantity of gas at constant pressure and temperatures. This law states that the volume of a gas held at constant temperature and pressure is directly proportional to the number of moles of the gas: if the amount of gas increases, the volume will increase, and if the amount of gas decreases, the volume decreases.

Then, Avogadro's law states that the volume of a gas is directly proportional to the number of moles of the gas, while pressure and temperature are kept constant (V/n constant).

Answer:

Boyle's Law: This gas relates pressure and volume at a fixed Temperature.

Charles' Law: This gas law relates the volume of a given mass and its temperature at a fixed pressure.

Avogadro's Law: This gas law relates the volume occupied by an ideal gas and the number of moles present at a fixed temperature and pressure.Avogadro's Law

Ideal Gas Law: This law states that the volume of any gas is directly proportional to the number of moles of the gas and the temperature of the gas and is inversely proportional to the pressure of the gas.

Answer:

A colloidal system in which liquid is a dispersed phase and solid is dispersion medium is known as Gel.

Explanation:

M₁ = 2.0 mol/L

V₁ = 1 L

M₂ = 0.1 mol/L

V₂

M₁V₁ = M₂V₂

V₂ = M₁V₁ / M₂

V₂ = (2.0 mol/L)(1 L) / (0.1 L)

V₂ = 20 L

Therefore, the volume of the new solution will be 20 L.

#ILoveChemistry

#ILoveYouShaina

M₁V₁ = M₂V₂

V₂ = M₁V₁ / M₂

V₂ = (2.0 mol/L)(1 L) / (0.1 L)

V₂ = 20 L

THE BEST ANSWER IS

O 20L

Answer: 9.18 Litres

Standard Temperature and Pressure (STP). Think of this as the perfect environment where the Temp. is 0°C or 273 Kelvin and Pressure is always 1 atm. This is only true in STP.

This question uses the Ideal Gas Equation:

PV=nRT

P= 1 atm

V = ??

T = 273 K (always convert to Kelvin unless told otherwise)

n = 0.410 mol

R = 0.0821 L.atm/mol.K

What R constant to use depends on the units of the other values. (look at the attachments) The units cancel out and only Litres is left. You simply multiply the values.

Answer:

9.18 liters .............

heya

The density (g/mL) for a 20.0-mL sample of a salt solution has a mass of 24.0 g is 1.2 g/ml.

Density is the mass per unit volume. Density is a scalar quantity. It is denoted by d and the symbol for density is given as rho, a Greek symbol. Density is calculated as mass divided by volume.

Mass is the quantity of matter in a physical body. The product of the molar mass of the compound and the moles of the substance are defined as mass.

Volume is the space occupied by a three-dimensional object. Volume is calculated by dividing mass by density.

Given, the 20.0-mL sample of a salt solution, which is the volume.

The mass of the solution is 24.0 g

To calculate the density

mass/volume

24.0 / 20.0 = 1.2 g/ml

Thus, the density of the given salt solution is 1.2 g/ml.

To learn more about density, refer to the link:

https://brainly.com/question/17851361

#SPJ2

Answer:

Concentration of unknown solution is 0.0416 M

Explanation:

As we know  

Absorbance is equal to the product of molar absorptivity of KMnO4 m, path length and concentration

From the given set of graphical data, it is clear that the absorbance vs concentration is a straight line.  

From the graph, we can obtain-  

Y = 5.73 X – 0.0065

Absorbance = 0.232

0.232 = 5.73 X – 0.0065

X = 0.0416  

Concentration of unknown solution is 0.0416 M

Answer:

1.49 × 10⁹ years

Explanation:

Step 1: Calculate the rate constant (k) for the nuclear decay of U-235

The decay follows first-order kinetics with a half-life (t1/2) of 703 × 10⁶ years. We can calculate "k" using the following expression.

k = ln2/ t1/2 = ln2 / 703 × 10⁶ y = 9.86 × 10⁻¹⁰ y⁻¹

Step 2: Calculate the time elapsed (t) so that the final amount ([U]) is 23.0% of the initial amount ([U]₀)

For first order kinetics, we will use the following expression.

ln ([U]/[U]₀) = -k × t

ln (0.230[U]₀/[U]₀) = -9.86 × 10⁻¹⁰ y⁻¹ × t

ln 0.230 = -9.86 × 10⁻¹⁰ y⁻¹ × t

t = 1.49 × 10⁹ y

Answer: Hello I was able to find the missing options related to your question online but I couldn't attach them hence I just used them to provide the relevant solution

answer:

Explanation:

OPEN end of the tube down. Continue tapping until the sample. Is a couple of mm high Then, with the Closed end of the tube down, tap the sample down slowly or drop tube into a longer/larger tube to move the sample down faster. Finally, make sure that you can see  sample clearly in the magnifier when placed in the melting point apparatus before turning on the heat.

Answer: It is true that Your friend should release the [tex]Cl_{2}[/tex] first.

Explanation:

The velocity of particles of a gas is inversely proportional to the mass of gas. This means that more is the mass of gas less will be its velocity.

Or, more will be the mass of gas more slowly it will move from one place to another.

The molar mass of chlorine gas is more than the molar mass of hydrogen gas. Therefore, chlorine gas will move slowly.

So, your friend should release the [tex]Cl_{2}[/tex] gas first and then according to the length of room you should release the [tex]H_{2}[/tex] gas.

Thus, we can conclude that it is true that Your friend should release the [tex]Cl_{2}[/tex] first.

Answer:

b

Explanation:

The figures of a number that are noteworthy in high accuracy or precision are known as significant figures. They are as follows:

From the given information:

To (3) sig. fig: 5578 L = 558 L

Answer:

Identify the indicated protons in the following molecules as unrelated, homotopic, enantiotopic, or diastereotopic. a) Methyls a & b: _________ b) Ha & Hc: ________

Explanation:

Homotopic hydrogens:

Consider two hydrogens in the given molecule and replace one by one with a different atom say for example deuterium, then if the two molecules formed by replacing hydrogens are the same then the two hydrogens are called homotopic hydrogens.

After replacing the two hydrogens with a different atom then, enantiomers are formed then, the two hydrogens are called enantiotopic hydrogens.

After replacing the two hydrogens with a different atom then, diastereomers are formed then, the two hydrogens are called diastereotopic hydrogens.

In the methyl group, select two hydrogens and replace one hydrogen atom with a D-atom name the compound.

Again replace another hydrogen atom with D-atom.

Name it.

If both are the same then, the hydrogens are homotopic and they are shown below:

Hence, they are homotopic protons.

Answer: Pressure of the gas is 0.129375 atm when the volume of the vessel increased by a factor of 16.00.

Explanation:

The formula for ideal gas equation is as follows.

[tex]PV = Nk_{b}T[/tex]

where,

[tex]k_{b}[/tex] = Boltzmann constant

N = number of moles

That can also be written as:

[tex]\frac{PV}{T} = constant[/tex]

As pressure and volume are inversely proportional to each other. So, if one of the state variable is increased then the other one will decrease or vice-versa.

So, if volume of the vessel increased by a factor of 16.00 then it means pressure is decreased by a factor of 16.00

Therefore, final volume is as follows.

[tex]65.8 L \times 16.00\\= 1052.8 L[/tex]

Now, final pressure is as follows.

[tex]\frac{2.07}{16.00}\\= 0.129375 atm[/tex]

Initially the product of pressure and volume is as follows.

[tex]PV = 2.07 \times 65.8\\= 136.206[/tex]

Hence, if volume of the vessel increased by a factor of 16.00 and pressure is decreased by a factor of 16.00 then its product is as follows.

[tex]PV = 0.129375 \times 1052.8\\= 136.206[/tex]

Here, product of pressure and volume remains the same.

Thus, we can conclude that pressure of the gas is 0.129375 atm when the volume of the vessel increased by a factor of 16.00.

Answer:

hmmm?what?

Explanation:

ayusin mo flece:>

Answer:

sorry i cant give the answer but you can gi end check in answer sheet of this becoz i had same question in exam in chemistry so i revised then i checked the answer if you want to check answer go to www.coachscotchemistry.com there you xan find the answer

Answer:

The intensity of the color directly changes in response to the concentration

Explanation:

One of the major indicators of the concentration of a solution is the colour of the solution.

The colour of the solution changes as the concentration of the solution changes. If the solution becomes more concentrated, the colour of the solution becomes deeper. If the solution becomes more dilute, the colour of the solution becomes lighter.

It then follows that, the intensity of the color of a solution directly changes in response to the concentration of the solution.

Answer:

positron emission

Explanation:

Positron emission,involves the decrease in the nuclear positive charge thus the atomic number of the daughter nucleus decreases by one unit compared to that of the parent nucleus while the mass number of the daughter nucleus remains the same as that of the parent nucleus.

Thus, when phosphorus-28 is transformed into to silicon-28, a positron emission has taken place because the mass number of the daughter nucleus remained the same while the atomic number of the daughter nucleus was decreased by one unit.

Answer:

liquid is the right answer k

Answer:

liquid

Explanation:

Answer:

The three primary colors used when mixing dyes or paints are red, yellow, and blue. Other colors are often a mixture of these three colors. Try running a chromatography test again with non-primary-color markers, like purple, brown, and orange.

Explanation:

Answer:

Draw the predominant product(s) of the following reactions including stereochemistry when it is appropriate.

CH3CH2 C C CH3 H2O/H2SO4/HgSO4

Explanation:

The given compound is: pent-2-yne.

When it reacts with water, in presence of sulphuric acid and mercuric sulphate then a ketone is formed as shown below:

This reaction is an example of nucleophilic attack of water on carbon carbon triple bond.

The general mechanism of the reaction is hsown below:

Pent-2-yne reacts with water and form 3-pentanone.

The reaction is shown below:

Answer:

Nhiệt dung riêng của đồng là  

380

J

/

k

g

.

K

Explanation:

Answer:

178.5g of NaCl is the maximum amount that can be dissolved

Explanation:

Solubility is defined as the maximum amount of solute that can be dissolved in aAt 20°C, the solubility of NaCl is 35.7g per 100g of water at 20°C. That means the maximum amount that can be dissolved of NaCl is:

500g water * (35.7g NaCl / 100g water) =