Describe the periods in Mendeleev’s table.

a 0.50 liter solution of 0.10 M HF titrated to the equivalence point with a 0.10 M solution of NaOH. The final volume of the solution is 1.0 liter. The pH of the equivalence point is 5.87.

The titration of hydrofluoric acid (HF) with sodium hydroxide (NaOH) can be represented by the balanced chemical equation:

HF (aq) + NaOH (aq) → NaF (aq) + H₂O (l)

At the equivalence point of the titration, the moles of NaOH added will be equal to the moles of HF originally present in the solution. We can use the balanced chemical equation to determine the number of moles of HF in the original solution:

0.10 M HF = 0.10 mol HF / L

0.50 L HF solution contains 0.05 mol HF

Therefore, when 0.05 mol NaOH is added at the equivalence point, it will react with all the HF present in the solution to form NaF and water.

The balanced chemical equation shows that one mole of HF produces one mole of H+ ions in solution. At the equivalence point, all the HF has been neutralized, and the remaining solution contains only NaF and water. NaF is the salt of a weak acid (HF) and a strong base (NaOH), and it undergoes hydrolysis in water, which means it reacts with water to produce H+ ions and F- ions:

NaF (aq) + H₂O (l) → HF (aq) + Na+ (aq) + OH- (aq)

The Kc expression for the hydrolysis of NaF is:

Kc = [HF][Na⁺][OH⁻] / [NaF]

At the equivalence point, all the HF has been converted to NaF, so [HF] = 0 M. The initial concentration of NaF is:

0.10 M NaOH = 0.10 mol NaOH / L

0.05 L added to the HF solution

0.005 mol NaOH added

0.005 mol NaF formed

0.005 M NaF

The reaction between NaF and water produces equal amounts of H⁺ and OH⁻ ions, so [H⁺] = [OH⁻] = x M (assuming the solution is initially neutral). The concentration of Na⁺ ions is equal to the initial concentration of NaF, which is 0.005 M. Substituting these values into the Kc expression, we get:

Kc = x² * 0.005 / 0.005

Kc = x²

Taking the square root of both sides, we get:

x = sqrt(Kc)

x = sqrt(1.8 × 10⁻¹¹)

x = 1.34 × 10⁻⁶ M

At the equivalence point, the pH of the solution is given by:

pH = -log[H⁺]

pH = -log(1.34 × 10⁻⁶)

pH = 5.87

Therefore, the pH of the solution at the equivalence point is 5.87.

To know more about the equivalence point refer here :

https://brainly.com/question/31415949#

#SPJ11

Answer:

17 mL

Explanation:

n = concentration × volume

n = 850 × 0.220

n = 187 moles

n = cv

v = n/c

v = 187/11M

v = 17 mL

The pH of the solution before the addition of any LiOH is approximately 0.74.

To determine the pH of the solution before the addition of any LiOH, we need to use the dissociation constant (Ka) of HClO₄.

HClO₄ + H₂O ⇌ H₃O⁺ + ClO₄⁻

Ka = [H₃O⁺][ClO₄⁻]/[HClO₄]

Since HClO₄ is a strong acid, it dissociates completely in water, and we can assume that [H₃O⁺] = [HClO₄]. Therefore:

Ka = [H₃O⁺]²/[HClO₄]

From the given concentration of HClO₄ (0.18 M), we can calculate the initial concentration of H₃O⁺ and pH:

[H₃O⁺] = [HClO₄] = 0.18 M

pH = -log[H₃O⁺] = -log(0.18) = 0.74

Therefore, the pH of the solution before the addition of any LiOH is 0.74.

Learn more about pH here: https://brainly.com/question/26424076

#SPJ11

Compounds that are more polar or have a higher solubility in the eluent will be eluted more quickly and will therefore come out of the column first. Acetylferrocene is more polar and less soluble in the eluent than ferrocene.

The order of elution of compounds from a chromatography column is determined by their relative polarity and solubility in the mobile phase (eluent). In the case of ferrocene and acetylferrocene, ferrocene is less polar and more soluble in the eluent (such as hexanes) than acetylferrocene.

Therefore, when a hexanes/ethyl acetate mixture (which is more polar than pure hexanes) is used as the eluent, acetylferrocene will have a higher affinity for the stationary phase and will be retained on the column for longer. Ferrocene, being less polar, will have a lower affinity for the stationary phase and will be eluted more quickly.

Learn more about  Acetylferrocene here:

https://brainly.com/question/17087710

#SPJ11

When an individual has severe diarrhea, they lose not only water but also important electrolytes, such as sodium, potassium, and chloride. If only water is given to the individual, it can lead to further electrolyte imbalances in the body, which can be dangerous or even fatal.

The rehydration solution contains the necessary electrolytes and glucose, which help to replenish the lost fluids and nutrients in the body, restore the electrolyte balance, and improve the absorption of water from the gut.

The sodium and glucose in the solution are also actively transported across the gut wall, which helps to increase water absorption from the gut and reduce diarrhea.

Therefore, it is important to use a solution like this rather than simply giving the individual water, as it helps to correct the underlying electrolyte imbalances, restore fluid balance, and promote recovery from diarrhea.

To know more about the rehydration solution refer here :

https://brainly.com/question/4119464#

#SPJ11

The number of daughter product (207Pb) will the crystal contain in 1.4 billion years is 30,000, option B.

Understanding radioactive decay and managing radioactive waste depend on the existence of decay products. The decay chain usually terminates with an isotope of lead or bismuth for elements with atomic numbers higher than lead.

Individual components of the decay chain are frequently just as radioactive as the parent but much smaller in volume or mass. Due to the fact that some naturally occurring pitchblende contains radium-226, which is soluble and not a ceramic like the parent, some bits of pitchblende are highly harmful even though uranium is not dangerously radioactive when pure. Similar to this, after only a few months of storage, the daughters of 232Th begin to accumulate and increase the radioactivity of thorium gas mantles, which are initially only very faintly radioactive.

Learn more about Daughter product:

https://brainly.com/question/19264254

#SPJ4

Complete question:

A crystal of zircon incorporates 40,000 atoms of 235U within its structure when it crystallizes from a magma. After two half-lives (~1.4 billion years) have elapsed how many atoms of the daughter product (207Pb) will the crystal contain?

0 40.000 30,000 Oc 20,000 d. 10.000

When sodium thiosulfate (Na₂S₂O₃) is introduced to a solution containing silver bromide (AgBr), the silver ions (Ag⁺) in the solution react with the thiosulfate ions (S₂O₃²⁻) from the sodium thiosulfate, resulting in the formation of complex ions. These complex ions consist of a metal ion, which in this case is Ag⁺, and one or more ligands, in this case, the thiosulfate ions.

This reaction occurs because the thiosulfate ions have a high affinity for the silver ions due to their ability to coordinate with the metal ion, forming a stable complex. Once the complex ion is formed, it remains in solution and does not precipitate out as a solid.

Therefore, all the silver ions in solution will form complex ions when sodium thiosulfate is added to a solution of silver bromide, leading to the formation of a clear colorless solution. This reaction is often used in photography to fix the image by removing the unexposed silver bromide from the photographic film.

To know more about the complex ion refer here :

https://brainly.com/question/31418041#

#SPJ11

Dissolve approximately 13.48 grams of silver in the form of silver nitrate to prepare 250 mL of a 0.500 M solution for your final chemistry exam.

To prepare 250 mL of a 0.500 M solution of silver nitrate for your final chemistry exam, you will need to dissolve the following amount of silver:

Step 1: Calculate the moles of silver nitrate needed
Moles = Molarity × Volume (in liters)
Moles = 0.500 mol/L × 0.250 L
Moles = 0.125 mol of silver nitrate

Step 2: Determine the molar mass of silver nitrate (AgNO3)
Ag = 107.87 g/mol
N = 14.01 g/mol
O = 16.00 g/mol
Molar mass of AgNO3 = 107.87 + 14.01 + (3 × 16.00) = 169.88 g/mol

Step 3: Calculate the mass of silver nitrate needed
Mass = Moles × Molar mass
Mass = 0.125 mol × 169.88 g/mol
Mass = 21.235 g of silver nitrate

Step 4: Determine the proportion of silver in silver nitrate
Proportion of silver = (Molar mass of Ag) / (Molar mass of AgNO3)
Proportion of silver = 107.87 g/mol / 169.88 g/mol
Proportion of silver ≈ 0.635

Step 5: Calculate the mass of silver needed
Mass of silver = Mass of silver nitrate × Proportion of silver
Mass of silver = 21.235 g × 0.635
Mass of silver ≈ 13.48 g

For more information on chemistry involving silver nitrate refer https://brainly.com/question/30326530

#SPJ11

The mass of the unknown hydrogen peroxide sample that have a density of 1.00 g/mL from its volume is 50 grams.

To calculate the mass of the unknown hydrogen peroxide sample, you need to know its volume and the density of dilute hydrogen peroxide solutions. As stated in the question, the density of such solutions is 1.00 g/mL.

Let's say the volume of the unknown hydrogen peroxide sample is 50 mL. To find the mass, you can use the following formula:

Mass = Density x Volume

In this case, the density is 1.00 g/mL, and the volume is 50 mL. Plugging these values into the formula:

Mass = 1.00 g/mL x 50 mL

Mass = 50 g

Therefore, the mass of the unknown hydrogen peroxide sample is 50 grams.

Learn more about mass of hydrogen peroxide: https://brainly.com/question/4577984

#SPJ11

.120 mol of electrons is transported from one side of an electrochemical cell to another in minutes, the size of electric current that must flow is 11,578.2 A.

We need to use Faraday's constant, which tells us that one mole of electrons carries a charge of 96,485 coulombs. Therefore, 0.120 mol of electrons carries a charge of 0.120 mol x 96,485 C/mol = 11,578.2 C

If we want to transport this charge in minutes, we need to divide it by the number of minutes:
11,578.2 C / (number of minutes) = electric current in amperes (A)

So, here no. of minutes = 1.

Therefore electric current = 11,578.2 A.

To know more about electric current visit:

https://brainly.com/question/29766827

#SPJ11

The pH of the buffer solution is 7.83. A solution with a pH of 7 is considered neutral, while solutions with pH values less than 7 are acidic and solutions with pH values greater than 7 are basic (alkaline).

What is Buffer Solution?

A buffer solution is a solution that can resist changes in pH upon addition of small amounts of acid or base. Buffer solutions are important in many chemical and biological processes where maintaining a stable pH is crucial.

The pKa values for these dissociation steps are 2.14, 7.20, and 12.35, respectively. Since we are given the concentrations of phosphoric acid and its conjugate base, we can calculate the concentrations of H+ and [tex]H_2PO_4-[/tex]  using the following equations:

[H+] = sqrt((Ka1Ka2[H3PO4])/([H2PO4-]+Ka1*[H3PO4]))

[H2PO4-] = [H3PO4]/([H+]/Ka1+1)

where Ka1 and Ka2 are the dissociation constants of phosphoric acid (Ka1 = 7.5 x [tex]10^{-3}[/tex], Ka2 = 6.2 x [tex]10^{-8}[/tex]).

Plugging in the given values, we have:

[H3PO4] = 0.155 mol

[H2PO4-] = 0.250 mol

V = 0.500 L

Using the above equations, we can find that:

[H+] = 7.24 x [tex]10^{-8}[/tex] M

[H2PO4-] = 0.218 M

Now, we can use the Henderson-Hasselbalch equation to calculate the pH:

pH = pKa + log([A-]/[HA])

pH = 7.20 + log(0.218/0.032)

pH = 7.20 + 0.627

pH = 7.83

Therefore, the pH of the buffer solution is 7.83.

To know more about Buffer Solution, visit;

https://brainly.com/question/8676275

#SPJ4

In an electrolytic cell in which an object is being plated with silver, the half-reaction that occurs at the negative electrode (cathode) is:

Ag⁺(aq) + e⁻ → Ag(s)

In this reaction, silver ions in solution (Ag⁺) gain electrons (e⁻) to form solid silver (Ag) on the surface of the object being plated. This process is called reduction, and it occurs at the cathode, which is the negative electrode in an electrolytic cell.

Meanwhile, at the positive electrode (anode), the half-reaction that occurs is the oxidation of a source of silver, such as a silver electrode or a silver compound:

Ag(s) → Ag⁺(aq) + e⁻

In this reaction, solid silver (Ag) loses an electron (e⁻) to form silver ions (Ag⁺) in solution. This process is called oxidation and it occurs at the anode, which is the positive electrode in an electrolytic cell.

Overall, in the electrolytic cell, silver ions are reduced at the cathode to form solid silver on the object being plated, while a source of silver is oxidized at the anode to maintain the concentration of silver ions in solution.

For more information about electrolysis, refer to the link:

brainly.com/question/12054569

#SPJ4

Full Question ;

Electrolysis is used to silver plate an iron spoon by placing it in a solution containing Ag+ ions and connecting the spoon and a silver electrode to a battery. Enter the half‑reaction that takes place when the spoon is plated with silver. Include phases.

The fastest reaction between the alkyl bromides and sodium iodide in acetone would be the one with the most reactive alkyl halide.

In general, primary alkyl halides react faster than secondary or tertiary ones. Therefore, 1-bromobutane would be expected to react faster than 2-bromobutane or 2-bromo-2-methylpropane. The reaction between an alkyl bromide and sodium iodide in acetone is known as the Finkelstein reaction, which is a substitution reaction that involves exchanging one halogen atom for another. In this reaction, the acetone acts as a solvent and helps to solubilize both the alkyl bromide and the sodium iodide.
It is important to note that the reactivity of alkyl halides can also be affected by the presence of other functional groups or steric hindrance. However, in the case of these three alkyl bromides, 1-bromobutane would be expected to react the fastest due to its primary nature.

To learn more about alkyl bromides click here https://brainly.com/question/31555985

#SPJ11

The amount of CO₂ (carbon dioxide) contained in a 1.00 L flask at a pressure of 1.67 atm and a temperature of 21.9°C is 46.47 g.

To calculate the amount of CO₂ in the flask, we can use the ideal gas law, which relates the pressure, volume, temperature, and amount of gas.

The ideal gas law equation is:

PV = nRT

Where:

P = pressure of the gas (in atm)

V = volume of the gas (in L)

n = amount of gas (in moles)

R = ideal gas constant (0.0821 L atm / (mol K))

T = temperature of the gas (in Kelvin)

First, we need to convert the temperature from Celsius to Kelvin by adding 273.15:

T = 21.9°C + 273.15 = 295.05 K

Given:

Pressure (P) = 1.67 atm

Volume (V) = 1.00 L

Temperature (T) = 295.05 K

We can rearrange the ideal gas law equation to solve for the amount of gas (n):

n = PV / (RT)

Plugging in the given values:

n = 1.67 atm x 1.00 L / (0.0821 L atm / (mol K) x 295.05 K)

n = 0.0568 mol (rounded to four decimal places)

Now, we can calculate the mass of CO₂ using its molar mass, which is 44.01 g/mol.

Mass of CO₂ = molar mass of CO₂ x amount of CO₂ (in moles)

Mass of CO₂ = 44.01 g/mol x 0.0568 mol

Mass of CO₂ = 46.47 g (rounded to two decimal places)

So, the amount of CO₂ contained in the 1.00 L flask at a pressure of 1.67 atm and a temperature of 21.9°C is 46.47 g.

To know more about ideal gas law refer here:

https://brainly.com/question/30458409#

#SPJ11

The concentration of the final solution after mixing 46.2 mL of a 0.468 M Ca(NO₃)₂ solution with 90.5 mL of a 1.896 M Ca(NO₃)₂ solution is 1.119 M.

To calculate the concentration of the final solution, we can use the concept of molarity, which is defined as the amount of solute (in moles) dissolved in a given volume of solution (in liters).

First, we need to find the total amount of moles of Ca(NO₃)₂ in both solutions. For the 46.2 mL of 0.468 M Ca(NO₃)₂ solution, the moles of Ca(NO₃)₂ can be calculated as follows:

moles of Ca(NO₃)₂ = concentration (M) × volume (L)

= 0.468 M × 0.0462 L

= 0.0216 moles

Similarly, for the 90.5 mL of 1.896 M Ca(NO₃)₂ solution, the moles of Ca(NO₃)₂ can be calculated as follows:

moles of Ca(NO₃)₂ = concentration (M) × volume (L)

= 1.896 M × 0.0905 L

= 0.1714 moles

Next, we add the moles of Ca(NO₃)₂ from both solutions to get the total moles of Ca(NO₃)₂ in the final solution:

total moles of Ca(NO₃)₂ = moles from first solution + moles from second solution

= 0.0216 moles + 0.1714 moles

= 0.193 moles

Finally, we divide the total moles of Ca(NO₃)₂ by the total volume of the final solution (which is the sum of the volumes of both solutions) to get the concentration of the final solution:

concentration of final solution = total moles of Ca(NO₃)₂ / total volume of final solution

= 0.193 moles / (0.0462 L + 0.0905 L)

= 1.119 M

Therefore, the concentration of the final solution after mixing the two solutions is 1.119 M.

To know more about molarity refer here:

https://brainly.com/question/8732513#

#SPJ11

The volume percentage of ethanol in the solution is approximately 27.54%.

To determine the volume percentage of ethanol in the solution, we need to divide the volume of ethanol by the total volume of the solution and then multiply by 100.
First, we need to add the volumes of ethanol and toluene to find the total volume of the solution:
38 mL + 100 mL = 138 mL
Now we can calculate the volume percentage of ethanol:
Volume percentage of ethanol = (38 mL ÷ 138 mL) x 100% = 27.54%
Therefore, the volume percentage of ethanol in the solution is 27.54%.
To calculate the volume percentage of ethanol in the solution, we need to first determine the total volume of the solution, and then find the proportion of ethanol in it. Here's the step-by-step calculation:
1. Determine the total volume of the solution:
Total volume = Volume of ethanol + Volume of toluene
Total volume = 38 mL (ethanol) + 100 mL (toluene)
Total volume = 138 mL
2. Calculate the volume percentage of ethanol:
Volume percentage of ethanol = (Volume of ethanol / Total volume) × 100
Volume percentage of ethanol = (38 mL / 138 mL) × 100
Volume percentage of ethanol ≈ 27.54%
So, the volume percentage of ethanol in the solution is approximately 27.54%.

learn more about solution here

https://brainly.com/question/28945073

#SPJ11

A solution is diluted by adding more solvent, which means the concentration of the solution decreases but the amount (moles) of the solute stays the same.

It is because the total volume of the solution increases but the amount of solute remains constant, resulting in a decrease in concentration. In direct answer to your question, the addition of solvent is what causes a solution to become diluted, and this occurs without any change in the amount of solute present.

A solution is diluted by adding more solvent, which means the volume of the solution increases but the amount (moles) of the solute stays the same.

To know more about concentration, visit:

https://brainly.com/question/10725862

#SPJ11

When the spins of an electron and proton in a hydrogen atom change from parallel to antiparallel, the atom transitions from the triplet state to the singlet state, resulting in the emission of the Lyman-alpha line and a lowering of the atom's energy.

When an electron and proton in a hydrogen atom have parallel spins, they are in a state known as a triplet state. In this state, the total spin angular momentum of the atom is equal to 1, and the atom has higher energy than it would in a singlet state where the total spin angular momentum is equal to 0.

If the spins of the electron and proton change from parallel to antiparallel, the atom transitions from the triplet state to the singlet state. This transition results in the emission of a photon with a wavelength of 121.6 nanometers, which is known as the Lyman-alpha line.

The transition from the triplet state to the singlet state results in a lowering of the energy of the hydrogen atom. This change in energy can have important consequences in a variety of contexts. For example, the Lyman-alpha line is commonly used in astronomy to study the properties of intergalactic gas clouds, as it is one of the brightest emission lines in the spectra of these objects.

To learn more about electron

https://brainly.com/question/1255220

#SPJ4

The nickname that have given to the warming effect on the global climate based on an overabundance of gases and vapors in the air  is known as the "Greenhouse Effect."

The term is derived from the way a greenhouse works, where sunlight enters through the glass walls and heats up the interior, but the heat is then trapped inside and cannot escape, resulting in higher temperatures.

Similarly, the Earth's atmosphere acts like a greenhouse, allowing sunlight to pass through but trapping the heat that is radiated back from the Earth's surface, leading to a gradual increase in temperature over time.

This effect is caused primarily by human activities such as the burning of fossil fuels, deforestation, and industrial processes, which release large amounts of greenhouse gases such as carbon dioxide, methane, and nitrous oxide into the atmosphere.

To know more about greenhouse effect   click on below link :

https://brainly.com/question/13390232

#SPJ11

The final pressure of the gas, in atm, assuming no change in moles or temperature, is 0.28 atm

To solve this problem, we can use Boyle's Law, which states that the pressure and volume of a gas are inversely proportional at constant temperature and moles.

Mathematically, this can be expressed as P1V1 = P2V2, where P1 and V1 are the initial pressure and volume, and P2 and V2 are the final pressure and volume.

First, we need to convert the initial pressure of 380 mmHg to atm. 1 atm = 760 mmHg, so 380 mmHg = 0.5 atm.

Using Boyle's Law, we can set up the equation:

P1V1 = P2V2
0.5 atm x 5.0 L = P2 x 9.0 L

Simplifying the equation, we get:

P2 = (0.5 atm x 5.0 L) / 9.0 L
P2 = 0.28 atm

Therefore, the final pressure of the gas, in atm, assuming no change in moles or temperature, is 0.28 atm.
Hi! To solve this problem, we can use Boyle's Law, which states that the product of the initial pressure and volume (P1V1) is equal to the product of the final pressure and volume (P2V2) for a constant temperature and amount of gas.

Initial pressure (P1) = 380 mmHg
Initial volume (V1) = 5.0 L
Final volume (V2) = 9.0 L

First, let's convert the initial pressure from mmHg to atm:
1 atm = 760 mmHg
P1 = 380 mmHg * (1 atm / 760 mmHg) = 0.5 atm

Now apply Boyle's Law:
P1V1 = P2V2
(0.5 atm)(5.0 L) = P2(9.0 L)

To find the final pressure (P2), divide both sides of the equation by 9.0 L:
P2 = (0.5 atm)(5.0 L) / 9.0 L = 0.2778 atm

So, the final pressure of the gas is approximately 0.2778 atm.

To know more about pressure  click on below link :

https://brainly.com/question/19722560

#SPJ11

Answer:The final pressure of the gas is 0.278 atm.

Explanation:

To solve this problem, we can use Boyle's law, which states that the product of pressure and volume is constant for a given amount of gas at a constant temperature:

P1V1 = P2V2

where P1 and V1 are the initial pressure and volume, respectively, and P2 and V2 are the final pressure and volume, respectively.

Plugging in the given values, we get:

P1 = 380 mmHg

V1 = 5.0 L

V2 = 9.0 L

Solving for P2, we get:

P2 = (P1 * V1) / V2 = (380 mmHg * 5.0 L) / 9.0 L = 211.11 mmHg

To convert the pressure to atm, we divide by 760 mmHg/atm:

P2 = 211.11 mmHg / 760 mmHg/atm = 0.278 atm

TO KNOW MORE ON Boyle's law,REFER

https://brainly.com/question/30367067#

#SPJ11

The concentration of [tex]H_3O^+ ions[/tex] present in the solution of HCl is 7.022 x [tex]10^(-6) M[/tex].

The pH of a solution is defined as the negative logarithm (base 10) of the concentration of [tex]H_3O^+ ions[/tex] present in the solution. Therefore, we can rearrange the equation to solve for the concentration of [tex]H_3O^+ ions[/tex]

pH = -log[H3O+]

[[tex]H_3O^+ ions[/tex]] = 10^(-pH)

In this case, the pH of the solution is 5.110.

Therefore, the concentration of [tex]H_3O^+ ions[/tex] is:

[H3O+] = 10^(-5.110) = 7.022 x [tex]10^(-6) M[/tex]

So, the concentration of [tex]H_3O^+ ions[/tex] present in the solution of HCl is 7.022 x [tex]10^(-6) M.[/tex]

Learn more about negative logarithm

https://brainly.com/question/3072484

#SPJ4

The work done by the gas during this isothermal expansion process is 627.92 J.

During an isothermal expansion, the temperature of the gas remains constant. Therefore, using the formula for work done in an isothermal process:

W = nRT ln(V₂/V₁)

Where:
n = number of moles of gas
R = gas constant = 8.31 J/mol*K
T = temperature of the gas
V₂ = initial volume of the gas
V₁ = final volume of the gas

First, we need to calculate the number of moles of gas. Using the ideal gas law:
PV = nRT
n = PV/RT
n = (9 kPa * 2.33333 L) / (8.31 J/mol*K * 273.15 K)
n = 0.00115 mol

Now, calculating the work done:

W = (0.00115 mol * 8.31 J/mol*K * 273.15 K) * ln(7 L / 2.33333 L)

W = 627.92 J

As a result, the gas exerted 627.92 J of work throughout this isothermal expansion phase.

To learn more about isothermal expansion visit:

https://brainly.com/question/17192821

#SPJ11

The pH of a 0.350 M sodium chlorite solution is 7.

The first step to calculate the pH of a sodium chlorite ([tex]NaClO_2[/tex]) solution is to write the balanced chemical equation for the dissociation of [tex]NaClO_2[/tex] in water:

[tex]NaClO_2 + H_2O = HClO_2 + Na^+ + OH^-[/tex]

The equilibrium expression for this reaction is:

[tex]Kb = ([HClO_2][OH^-])/[NaClO_2][/tex]

where Kb is the base dissociation constant for [tex]HClO_2[/tex]. We can use the relationship Kw = Ka x Kb (where Kw is the ion product constant for water) to find the value of Kb, since Ka for [tex]HClO_2[/tex] is known to be [tex]1.1 * 10^{-2}[/tex]:

Kw = Ka x Kb

[tex]1.0 *10^{-14} = 1.1 * 10^{-2} x Kb\\Kb = 9.1 * 10^{-13}[/tex]

Now we can use the Kb expression to find the concentration of hydroxide ions in the solution:

[tex]Kb = ([HClO_2][OH^-])/[NaClO_2]\\9.1 * 10^{-13} = ([HClO_2][OH^-])/0.350\\[OH^-] = (9.1 * 10^{-13} x 0.350)/[HClO_2][/tex]

Since sodium chlorite is a salt, it completely dissociates in water, so the initial concentration of [tex]HClO_2[/tex] is zero. Therefore, the concentration of hydroxide ions in the solution is:

[tex][OH^-] = (9.1 * 10^{-13} * 0.350)/0 = 0[/tex]

This means that the solution is neutral, and the pH is 7.

For more question on pH click on

https://brainly.com/question/172153

#SPJ11

Let's assume we have 1 mole of the solution.Number of moles of acetyl bromide (n1) =Therefore, the mole fraction of acetyl bromide in the solution is 0.25.

Solutions can be classified based on their physical state. If the solvent is a liquid, then the solution is called a liquid solution. If the solvent is a gas, then the solution is called a gas solution. Similarly, if the solvent is a solid, then the solution is called a solid solution.Solutions can also be classified based on the amount of solute present. If the solution contains a small amount of solute relative to the amount of solvent, then it is called a dilute solution. If the solution contains a large amount of solute relative to the amount of solvent, then it is called a concentrated solution.

To know more about solution visit :

https://brainly.com/question/30665317

#SPJ11

The volume of the balloon at a depth that produces a pressure of 3.25 atm is 0.1538 L.

The initial volume of the balloon is 0.500 L at sea level. Let's assume that the temperature is constant and the number of moles of air inside the balloon is constant as well.

Using Boyle's law, which states that the pressure of a gas is inversely proportional to its volume at constant temperature and number of moles, we can find the new volume of the balloon:

P1V1 = P2V2

here P1 and V1 are the initial pressure and volume of the balloon, and P2 and V2 are the final pressure and volume of the balloon.

Substituting the given values, we get:

(1 atm) (0.500 L) = (3.25 atm) V2

Solving for V2, we get:

V2 = (1 atm) (0.500 L) / (3.25 atm)

V2 = 0.1538 L

Learn more about volume visit: brainly.com/question/4802074

#SPJ4

The reaction between nitrogen and potassium is highly exothermic and requires a lot of energy to overcome the triple bond in the N2 molecule. Once the reaction occurs, the resulting nitride ions would have a charge of -3.

If a nitrogen molecule, N2, were to react with a reactive metal such as potassium, the resulting compound would be a nitride.

This is because nitrogen has a valence of -3, meaning it needs to gain three electrons to complete its octet and achieve a stable electron configuration.

When nitrogen reacts with potassium, it forms a compound with a 1:3 stoichiometric ratio, meaning that for every one potassium ion (K+), there are three nitride ions (N3-).

The nitride ion has a structure similar to that of ammonia (NH3), with a lone pair of electrons on each nitrogen atom.

This makes it a powerful Lewis base and allows it to form strong bonds with metals, such as potassium. The resulting nitride ions are highly stable and form compounds with a wide range of metals.

to know more about exothermic reactions refer here:

https://brainly.com/question/29206227#

#SPJ11

We need to add 150.0 lbs/day of lime that is 70% CaO by mass to complete the nitrification reaction in 1 MGD of wastewater with an initial alkalinity of 60 mg/L as CaCO3.

To calculate the amount of lime needed to complete the nitrification reaction, we first need to determine the amount of alkalinity that needs to be provided.

The nitrification reaction for ammonia (NH3) can be expressed as follows:

[tex]NH_{3} + 2O_{2} - > NO_{3}- + H_{2}O + 2H^+[/tex]

For every mole of ammonia oxidized, two moles of alkalinity are consumed. Therefore, to completely nitrify all the ammonia in 1 million gallons per day (MGD) of wastewater with an initial alkalinity of 60 mg/L as [tex]CaCO_{3}[/tex], we need to add an amount of lime that will provide 2 x 60 = 120 mg/L of alkalinity.

To convert mg/L of alkalinity as to mg/L of lime (CaO), we need to use the following conversion factor:

1 mg/L [tex]CaCO_{3}[/tex]= 1 mg/L CaO / 0.56

where 0.56 is the equivalent weight ratio of CaO to [tex]CaCO_{3}[/tex].

So, the required dose of lime can be calculated as follows:

Required dose of lime = (120 mg/L) x (1 mg/L CaO / 0.56) x (1 MGD) x (70/100) x (1 day/24 hours)

= 150.0 lbs/day

Learn more about nitrification here:

https://brainly.com/question/28195929

#SPJ11

The second electron affinity of S represents the energy required to add an electron to a singly negative ion of sulfur (S^-).

The correct reaction is:

D. S2(g) → S(g) + e

This reaction represents the second electron affinity of S because it shows the addition of an electron to S^- to form S^2-, which is then immediately split into two S atoms, each of which gains an additional electron to form S^-. This overall reaction can be written as:

S2(g) + e → S^2-(g)

S^2-(g) → 2S^-(g)

2S^-(g) → 2S(g) + 2e

The second electron affinity of S is an endothermic process because energy is required to add an electron to a negatively charged ion.

To know more about visit :-

https://brainly.com/question/626780

#SPJ11

When a silver nitrate solution is mixed with a sodium chloride solution, a chemical reaction takes place that results in the formation of a white precipitate of silver chloride.

This precipitate forms because silver ions from the silver nitrate solution combine with chloride ions from the sodium chloride solution to form insoluble silver chloride. This reaction is known as a double displacement reaction, and the balanced chemical equation for it is:
[tex]AgNO_3 + NaCl --> AgCl + NaNO_3[/tex]
The remaining products of the reaction, sodium nitrate and soluble silver nitrate, stay in solution and do not form a precipitate. The formation of silver chloride precipitate is a common reaction used in laboratory experiments to identify the presence of chloride ions in a sample. Overall, the reaction between silver nitrate and sodium chloride results in the formation of silver chloride precipitate, which is insoluble and readily visible.

To learn more about silver chloride click here https://brainly.com/question/12912140

#SPJ11

To make 250 mL of a 0.45 M solution by diluting a 1.85 M solution, you would need 58.11 mL of the 1.85 M solution and 191.89 mL of water.

To calculate the amount of the 1.85 M solution needed, we can use the formula:

M₁V₁ = M₂V₂

where M₁ is the initial concentration, V₁ is the initial volume, M₂ is the final concentration, and V₂ is the final volume.

Substituting the given values, we have:

(1.85 M)(V₁) = (0.45 M)(250 mL)

Solving for V₁, we get:

V₁ = (0.45 M)(250 mL) / (1.85 M) = 58.11 mL

Therefore, we need 58.11 mL of the 1.85 M solution.

To calculate the amount of water needed, we can subtract the volume of the 1.85 M solution from the final volume:

V₂ - V₁ = 250 mL - 58.11 mL = 191.89 mL

To know more about concentration, refer here:

https://brainly.com/question/30639206#

#SPJ11