consider a die where the probability of rolling 1, 2, 3, 4, 5, and 6 are in the ratio 1:2:3:4:5:6. what is the probability that when this die is rolled twice, the sum

The number of ways of selecting the four students out of nine students for attending the conference is equals to the 126 from using the combination formula.

The number of combinations of n things taken r at a time is determined by the combination formula. It is the factorial of n, divided by the product of the factorial of r and the factorial of the difference of n and r respectively. Mathematically, it can be written as [tex]ⁿCᵣ= \frac{ n!}{r! ( n - r)!}[/tex]

Now, we have number of students majoring in Mathematics = 4

Number of students majoring in chemistry = 5

So, total number of students majoring = 9

Four students are selected to attend conference. Here, n = 9, r = 4 so,

Number of ways to any four can attend =

[tex] 9C_4 = \frac{ 9!}{4! ( 9 - 4)!}[/tex]

[tex]= \frac{ 9×8×7×6×5!}{4! 5!}[/tex]

[tex]=\frac{ 9×8×7×6}{4×3×2}[/tex]

= 18× 7 = 126

Hence, required value is 126.

For more information about combination formula, visit:

https://brainly.com/question/13877117

#SPJ4

The angle of elevation to the top of the tower at a location on level ground 60 feet from its base is roughly 52.1 degrees, the solution being.

We must utilize trigonometry to determine the elevation angle. The opposing over adjacent tangent function (tan = opposite/adjacent) can be used. The tower's height in this instance is on the other side (85 feet), and the tower's proximity to the level ground is on the adjacent side (60 feet). We thus have:

tanθ = 85/60

When we simplify this, we get:

tanθ = 1.4167

We take the inverse tangent (or arctan) of both sides to find :

(1.4167) = arctan

Calculating the answer, we obtain:

51.10 degrees

the angle of elevation to theAt a point on level ground 60 feet from the tower's base, the angle at the top is roughly 52.1 degrees.

To know more about angle of elevation visit:

brainly.com/question/21137209

a) If n is an odd positive integer, then n+2 is also an odd positive integer.

b) If n is a positive integer power of 3, then 3n is also a positive integer power of 3.

c) If p(x) and q(x) are polynomials with integer coefficients, then the polynomials p(x) + q(x) and p(x) × q(x) are also in the set.

a) The set of odd positive integers can be recursively defined as follows:

Base case: The number 1 is an odd positive integer.

Recursive step: If n is an odd positive integer, then n+2 is also an odd positive integer.

b) The set of positive integer powers of 3 can be recursively defined as follows:

Base case: The number 1 is a power of 3.

Recursive step: If n is a positive integer power of 3, then 3n is also a positive integer power of 3.

c) The set of polynomials with integer coefficients can be recursively defined as follows:

Base case: The constant polynomials with integer coefficients are in the set.

Recursive step: If p(x) and q(x) are polynomials with integer coefficients, then the polynomials p(x) + q(x) and p(x) × q(x) are also in the set.

for such more question on integer

https://brainly.com/question/22008756

#SPJ11

The expected rate of return on the common stock of CrisisGreat is 4.43%.

To calculate the expected rate of return on the stock of CrisisGreat, we need to use the formula:

Expected rate of return = (Probability of recession * Rate of return in recession) + (Probability of normal economy * Rate of return in normal economy) + (Probability of boom * Rate of return in boom)

Let's plug in the given values:

Therefore, the expected rate of return on the common stock of CrisisGreat is 4.43%.

Learn more about rate of return

brainly.com/question/24232401

#SPJ11

When the sample accurately represents the population, the results of the study are said to have a "high degree of generalizability."

Generalizability refers to the extent to which the findings of a study can be extended to other populations or situations beyond the sample studied.

Know more about the Generalizability

https://brainly.com/question/3617626

#SPJ11

The angle of depression from plane to the building for the given situation of taking photographs is equal to 30.027°.

Height for the best photograph = 403ft

Distance from the top of the building = 810 ft

As the given figure represents it is right angled triangle.

Horizontal vision from top of the building to the base are parallel.

Angle of depression and angle of elevation represents alternate angles

This implies,

Measure of angle of depression = Measure of angle of elevation

Let us consider angle of elevation be α .

In right angled triangle,

sin α = ( height of the building ) / (distance from the building)

Substitute the values we have,

⇒ sin α =  403/ 810

⇒ α =  sin⁻¹ ( 0.4975 )

⇒ α =  30.027°

Angle of depression = angle of elevation

⇒  Angle of depression = 30.027°      

Therefore, the angle of depression from the plane to the building is equal to 30.027°.

learn more about angle of depression here

brainly.com/question/13514202

#SPJ1                        

The minimum relative frequency of data greater than 80 but less than 140 is 0.9973 or approximately 99.73%.

To find the minimum relative frequency of data greater than 80 but less than 140, we need to use the z-score formula, which measures the number of standard deviations a data point is from the mean.

z = (x - μ) / σ

where x is the data point, μ is the mean, and σ is the standard deviation.

For x = 80:

z = (80 - 110) / 10 = -3

For x = 140;

z = (140 - 110) / 10 = 3

Using a standard normal distribution table or calculator, we can find that the area under the curve between z = -3 and z = 3 is approximately 0.9973.

Therefore, the minimum relative frequency of data greater than 80 but less than 140 is 0.9973 or approximately 99.73%.

for such more question on frequency

https://brainly.com/question/20737927

#SPJ11

A series is said to converge conditionally if it converges, but the associated series formed by taking the absolute values of its terms does not converge. This concept mainly applies to alternating series, which have terms that alternate in sign, i.e., positive and negative terms.

To determine if a series converges conditionally, you can apply the Alternating Series Test and the Comparison Test or the Limit Comparison Test.

1. Alternating Series Test: If a series is alternating and satisfies these two conditions, it converges:
  a) The terms are decreasing in magnitude, i.e., |a_n+1| ≤ |a_n|.
  b) The limit of the terms as n approaches infinity is zero, i.e., lim(n→∞) |a_n| = 0.

2. Comparison Test or Limit Comparison Test: Apply either of these tests to the series formed by taking the absolute values of the terms. If the series diverges, then the original series converges conditionally.

To identify conditional convergence, ensure that the alternating series converges and the series with absolute values diverges.

To learn more about Limit comparison test : brainly.com/question/31362838

#SPJ11

The train will arrive at its final destination at 2:57 P.M. in the afternoon.

The total distance of the trip is 221 miles and the train travels at an average speed of 34 miles per hour. Using the formula:

time = distance / speed

We can calculate the total time it will take for the train to complete the journey without stopping at stations:

time = 221 / 34 = 6.5 hours

However, the train stops at each of ten stations for four minutes each, so the total time spent stopping is 10 x 4 = 40 minutes, or 0.67 hours. Therefore, the total time the journey will take, including the stops, is:

total time = 6.5 + 0.67 = 7.17 hours

The train departs at 7:30 A.M., so we can add 7.17 hours to this time to find the arrival time:

7:30 A.M. + 7.17 hours = 2:57 P.M.

Therefore, the train will arrive at its final destination at 2:57 P.M. in the afternoon.

for such more question on word problems

https://brainly.com/question/13818690

#SPJ11

To find the work done, we need to integrate the force F(r) along the path that the particle moves. Since the path is a straight line, we can parametrize it as r(t) = (2, 0, 0) + t((2,3,5)-(2,0,0)) = (2+2t, 3t, 5t),

where 0 <= t <= 1.

Then, the force F(r(t)) is given by F(t) = K(2+2t, 3t, 5t)/[(2+2t)^2 + (3t)^2 + (5t)^2]^(3/2).

The work done by the force as the particle moves from (2,0,0) to (2,3,5) is given by the line integral:

W = ∫ F(r(t)) · dr(t) from t=0 to t=1

where dr(t) is the differential of r(t) with respect to t.

Now, we need to evaluate the dot product F(r(t)) · dr(t).

Note that dr(t) = (2,3,5) dt, since the path is a straight line.

Therefore: F(r(t)) · dr(t) = K(2+2t, 3t, 5t)/[(2+2t)^2 + (3t)^2 + (5t)^2]^(3/2) · (2,3,5) dt

= K(2+2t)(2) + 3t(3) + 5t(5) / [(2+2t)^2 + (3t)^2 + (5t)^2]^(3/2) dt

= K(4+4t + 9t + 25t) / [(2+2t)^2 + (3t)^2 + (5t)^2]^(3/2) dt

= 38Kt / [(2+2t)^2 + (3t)^2 + (5t)^2]^(3/2) dt

Thus, the work done is:

W = ∫ F(r(t)) · dr(t) from t=0 to t=1

= ∫0^1 38Kt / [(2+2t)^2 + (3t)^2 + (5t)^2]^(3/2) dt

This integral is difficult to solve exactly, so we can use numerical methods or software to obtain an approximation.

Learn more about line integral, here:

brainly.com/question/30763905

#SPJ11

The area of the region enclosed by the curves x - 2 = 3y and x - 14 = (y - 4)² I 4.5 units ².

In mathematical analysis, it should be noted that the word region usually refers to a subset of or that is open (in the standard Euclidean topology), simply connected and non-empty.

In this case, a closed region is sometimes defined to be the closure of a region. Regions and closed regions are often used as domains of functions or differential equation.

The area based on the information will be:

= [(3y²/2 - 12y - (y - y/3)³]7 4

= 9/2

= 4.5

Learn more about region on

https://brainly.com/question/28747454

#SPJ1

The inference made is that, based on the sample of 2000 American adults surveyed, it is estimated that 52% of all American adults support the Iraq war.

The Iraq War was a conflict that began in 2003 and lasted for nearly a decade, involving the United States-led coalition and the government of Iraq. The war was launched in response to the belief that Iraq possessed weapons of mass destruction and that the country was a threat to international security. However, no such weapons were found, and the justifications for the war were widely debated and criticized.

The conflict resulted in the overthrow of Saddam Hussein's regime, and the subsequent establishment of a new government in Iraq. However, the war also led to a large number of casualties on both sides, with estimates of civilian deaths ranging from 100,000 to over 1 million. The war also caused significant political instability in the region, with sectarian violence and insurgent attacks becoming common.

To learn more about Iraq war visit here:

brainly.com/question/19488718

#SPJ4

The "significance level" of the test is the probability level necessary for statistical significance prior to using inferential statistics.

Inferential statistics is a branch of statistics that involves making inferences about a population based on a sample. One of the key concepts in inferential statistics is the significance level, which is the probability level below which the results of a statistical test are considered statistically significant.

The significance level, also known as alpha (α), is typically set at 0.05 or 0.01, although other values may be used depending on the specific research question and context. The significance level represents the probability of rejecting the null hypothesis when it is true, which is also known as a Type I error. In other words, it represents the likelihood of concluding that there is a significant effect or difference in the population when there really isn't one.

When conducting a statistical test, researchers calculate a p-value, which represents the probability of obtaining the observed results or more extreme results under the null hypothesis. If the p-value is less than or equal to the significance level, then the results are considered statistically significant, and the null hypothesis is rejected in favor of the alternative hypothesis.

To learn more about probability

https://brainly.com/question/30034780

#SPJ4

Answer:

.75 / 3 = x / 25

.75(25) = 3x

3x = 18.75, so x = 6.25 inches

= 6 1/4 inches

To calculate the number of possible passwords that use at least one uppercase letter and at least one lowercase letter, considering only letters and no other characters, we can use the formula: 26ⁿ - 2*26ⁿ, where n represents the length of the password.

Assuming we are only considering passwords that consist of letters (uppercase or lowercase) and no other characters or symbols, we can use the following approach to find the number of possible passwords that use at least one uppercase letter and at least one lowercase letter:

Number of passwords that use both uppercase and lowercase letters

= Total number of possible passwords - Number of passwords that only use lowercase letters - Number of passwords that only use uppercase letters

Number of passwords that use both uppercase and lowercase letters = 26ⁿ - 26ⁿ - 26ⁿ = 26ⁿ - 2*26ⁿ, where n is the length of the password.

Therefore, the number of possible passwords that use at least one uppercase letter and at least one lowercase letter is 26ⁿ - 2*26ⁿ, where n is the length of the password.

Learn more about uppercase letter

brainly.com/question/18512650

#SPJ11

The answers are:
A) The sequence converges to 1.
B) The sequence diverges.

For sequence A, we can simplify the expression by dividing both the numerator and denominator by n^2. This gives us:

a_n = √(1 + 4/n^2)/(1 + 1/n^2)

As n approaches infinity, the terms in the denominator become negligible compared to the terms in the numerator. Therefore, the sequence converges to:

lim a_n = √(1 + 0)/1 = 1

For sequence B, we know that the cosine function oscillates between -1 and 1, so the sequence will oscillate as well. As n approaches infinity, the terms in the denominator become larger, causing the oscillations to become more rapid. However, the sequence will never approach a single value, so it diverges.

Know more about converges here:

https://brainly.com/question/15415793

#SPJ11

It is more difficult to establish nonspuriousness in quasi-experiment designs, where do not use randomization to assign subjects to treatment and comparison groups. So, option(c) is right.

The prefix quasi means "resembling". Thus, quasi-experimental research is a type of research which resembles to experimental research but it is not a true experimental research. These designs are similar to true experiments but lack random assignment to experimental and control groups. A true experiment, a quasi-experimental design, aims to establish a cause-and-effect relationship between an independent and a dependent variable. Aim of these experiments is to evaluate interventions but without use of randomization. Subjects are assigned to groups based on non-random criteria. Since the independent variable is measured, not manipulated, they are best thought of as correlational research. Thus, the correct answer is to determine a relationship between two variables that is not caused by variation in a third variable, i.e, Nonspuriousness.

For more information about Quasi-experiments, visit :

https://brainly.com/question/29607006

#SPJ4

Complete question :

Because quasi-experimental designs do not use randomization to assign subjects to treatment and comparison groups, it is more difficult to establish:

a. Association

b. Time order

c. Nonspuriousness

d. Causal mechanism

e. Context

The probability values are calculated and listed below

They are both black

Here, we have

Black = 3

Yellow = 5

Sice the balls are not replaced, we have

P(Both black) = 3/8 * 2/7

P(Both black) = 3/28

They are both yellow

Sice the balls are not replaced, we have

P(Both Yellow) = 5/8 * 4/7

P(Both Yellow) = 5/14

The first is yellow and the second is black

Sice the balls are not replaced, we have

P(Yellow and black) = 5/8 * 2/7

P(Both Yellow) = 5/28

One is yellow the other is black

Sice the balls are not replaced, we have

P(One Yellow and One black) = 5/8 * 2/7 * 2

P(One Yellow and One black) = 5/14

They are of the same colour​

Here, we have

P(Same) = 3/28 + 5/14

P(Same) = 13/28

Read more about probability at

https://brainly.com/question/251701

#SPJ1

There are n different values that the remainder r can take on when [tex]n^2[/tex] is divided by n 4.

We can use the Remainder Theorem to solve this problem. The Remainder Theorem states that when a polynomial f(x) is divided by (x-a), the remainder is f(a).

Using this theorem, we can see that [tex]n^2[/tex] divided by n 4 leaves a remainder of [tex]n^2 - kn 4[/tex], where k is some integer. We want to find how many different values r can take on, which is the same as finding how many different values [tex]$n^2 - kn 4$[/tex] can take on.

Let's rewrite [tex]n^2 - kn 4 as n(n - k 4)[/tex]. This expression tells us that n and n - k 4 have the same remainder when divided by n 4. Therefore, n - k 4 can only take on n different values, namely [tex]0, n, 2n, \ldots, (n-1)n.[/tex]

For each of these n values, we can find a corresponding value of k that satisfies[tex]$n^2 - kn 4 \equiv r \pmod{n 4}$[/tex], namely [tex]k = (n^2 - r)/(n 4).[/tex] Therefore, there are exactly n different values that r can take on.

for such more question on remainder

https://brainly.com/question/11536181

#SPJ11

The individual failure rate needs to be approximately 3.33% for only 20% of 20 users to fail, assuming that the probability of failure is independent of another's failure.

If the chance of failure is independent of another's failure, it means that the probability of each individual failing is the same, and we can assume that the failures follow a binomial distribution.

Let p be the probability of an individual failing, and n be the number of trials (in this case, the number of users, n = 20).

The probability of exactly k failures out of n trials is given by the binomial probability formula:

[tex]P(k) = (n choose k) \times p^k \times (1-p)^{(n-k)[/tex]

where (n choose k) is the binomial coefficient, equal to n! / (k! × (n-k)!).

To find the individual failure rate needed for 20% of 20 users to fail, we need to solve for p such that P(4) = 0.2, where k = 4 is the number of failures we want to allow.

P(4) = (20 choose 4) [tex]\times p^4 \times (1-p)^{(20-4) }= 0.2[/tex]

Using a binomial calculator or software, we can solve for p and get:

p ≈ 0.0333 or 3.33%

for such more question on  probability

https://brainly.com/question/13604758

#SPJ11

Thus, there are 20 ways for the gambler to choose exactly 3 lucky numbers out of the 6 randomly chosen numbers in a keno game.

To find the number of ways the gambler can choose exactly 3 lucky numbers out of the 6 randomly chosen numbers in a keno game, we need to use combinations. A combination represents the number of ways to choose a certain number of items from a larger set without considering the order.

In this case, we will use the combination formula, which is C(n, k) = n! / (k! * (n-k)!), where n is the total number of items and k is the number of items to be chosen.

Here, n = 6 (the total numbers chosen by the gambler) and k = 3 (the number of lucky numbers to be chosen).

Applying the formula: C(6, 3) = 6! / (3! * (6-3)!)

C(6, 3) = 6! / (3! * 3!)

C(6, 3) = 720 / (6 * 6)

C(6, 3) = 720 / 36

C(6, 3) = 20

So, there are 20 ways for the gambler to choose exactly 3 lucky numbers out of the 6 randomly chosen numbers in a keno game.

Know more about the combinations.

https://brainly.com/question/28065038

#SPJ11

Answer:

≈ 19.1 feet

Step-by-step explanation:

A right triangle is formed by the building , the ground and the ladder , that is the hypotenuse.

let x be the distance foot of ladder is from the building.

using Pythagoras' identity in the right triangle

x² + 34² = 39²

x² + 1156 = 1521 ( subtract 1156 from both sides )

x² = 365 ( take square root of both sides )

x = [tex]\sqrt{365}[/tex] ≈ 19.1 feet ( to the nearest tenth )

Assuming that you can choose only one type of sandwich, one size, one type of bread, and any combination of fillings, you can personalize your sandwich in the following way : 5 (types of sandwich) x 3 (sizes) x 4 (types of bread) x 2^6 (choices of fillings) = 5 x 3 x 4 x 64 = 3840

So, you can personalize your sandwich in 3840 different ways by choosing one type of sandwich, one size, one type of bread, and any combination of six different fillings.
Hi! I'd be happy to help you determine the number of ways you can personalize your sandwich at this shop.

1. Sandwich type: There are 5 types of sandwiches to choose from.
2. Sandwich size: There are 3 different sizes available.
3. Bread type: You can select from 4 different kinds of bread.

Now, let's consider the fillings. Since there are 6 fillings, each one can either be included or not included. This results in 2 options (yes or no) for each filling.

To calculate the total number of personalized sandwiches, we can multiply the options for each aspect of the sandwich:

5 (types) * 3 (sizes) * 4 (breads) * 2^6 (fillings) = 5 * 3 * 4 * 64 = 3840

Therefore, you can personalize your sandwich in 3840 different ways.

Learn more about combination here : brainly.com/question/31596715

#SPJ11

The margin of error is stated to remind us that the observed results of a sample could be the result of random error.

The statement that is used to remind us that the observed results of a sample could be the result of random error is the "margin of error".

The margin of error is a measure of the amount of random sampling error in a survey's results. It is usually reported alongside survey results as a plus or minus percentage.

The larger the margin of error, the less confident we can be in the accuracy of the survey results.

The margin of error helps us to understand that there is always some degree of uncertainty when we are trying to estimate population characteristics based on a sample.

for such more question margin of error

https://brainly.com/question/10218601

#SPJ11

The total number of 4-digit campus telephone numbers in which the digit 6 appears at most twice is 7533.

There are two cases to consider:

Case 1: No 6's in the number

In this case, we can choose any digit from 0 to 9 for each of the 4 digits of the telephone number, except 6. Therefore, there are 9 options for each digit, and so the total number of 4-digit telephone numbers with no 6's is:

9 × 9 × 9 × 9 = 6561

Case 2: One or two 6's in the number

In this case, we can choose the positions for the 6's in ${4 \choose 1} + {4 \choose 2} = 6 + 6 = 12$ ways (either one 6 or two 6's), and then fill the remaining positions with any of the 9 digits (not including 6). Therefore, the total number of 4-digit telephone numbers with one or two 6's is:

12 × 9 × 9 = 972

Therefore, the total number of 4-digit campus telephone numbers in which the digit 6 appears at most twice is:

6561 + 972 = 7533

for such more question on word problem

https://brainly.com/question/1781657

#SPJ11

The solutions of the equation k² - 3k = 10 are k = 5 and k = -2.

We have,

To solve the equation k² - 3k = 10 using the zero product property, we first rearrange the terms so that one side of the equation is zero:

k² - 3k - 10 = 0

k² - (5 - 2)k - 10 = 0

k² - 5k + 2k - 10 = 0

k(k - 5) + 2(k - 5) = 0

(k - 5)(k + 2) = 0

According to the zero product property,

If the product of two factors is zero, then at least one of the factors must be zero.

So we set each factor equal to zero and solve for k:

k - 5 = 0 or k + 2 = 0

k = 5 or k = -2

Therefore,

The solutions of the equation k² - 3k = 10 are k = 5 and k = -2.

Learn more about solutions of equations here:

https://brainly.com/question/545403

#SPJ1

There are 1,000,000 different numeric combination codes that can be set on this lock.

Given that a combination lock has 6 settings, and any digit from 0 to 9 can be selected for each setting with the possibility of repetition, the number of different numeric combination codes that can be set on this lock can be calculated as follows:

Your answer: There are 10 possible digits for each of the 6 settings (0-9). Since each setting is independent and any digit can be repeated, you can simply multiply the number of possibilities for each setting together.

Step 1: Determine the number of possibilities for each setting (0-9) which is 10.
Step 2: Multiply the number of possibilities for all 6 settings: 10 x 10 x 10 x 10 x 10 x 10.

This results in 1,000,000 different numeric combination codes that can be set on this lock.

To know more about "combination" refer here:

https://brainly.com/question/28065038#

#SPJ11

To calculate the total cost of crown molding for Muriel's bedroom before tax, we'll follow these steps:

1. Find the perimeter of the room.
2. Determine the number of boards needed.
3. Calculate the total cost.

Step 1: Find the perimeter of the room.
The formula for the perimeter of a rectangle is P = 2(L + W), where L is the length and W is the width.
P = 2(15 + 12) = 2(27) = 54 feet

Step 2: Determine the number of boards needed.
Each board is 10 feet long, so we need to divide the perimeter by the length of each board.
54 feet / 10 feet = 5.4 boards
Since we can't purchase a fraction of a board, Muriel will need to buy 6 boards.

Step 3: Calculate the total cost.
Each board costs $45, so multiply the number of boards by the cost per board.
6 boards * $45 = $270

Muriel will pay $270 for the crown molding before tax.

Learn more about molding before tax here: brainly.com/question/13828963

#SPJ11

Without additional information about the test's validity, reliability, and normative data, it is difficult to draw definitive conclusions about its overall effectiveness as an assessment tool.

Based on the results provided, it appears that the new mechanical aptitude test has a wide range of scores and can produce different results when administered multiple times. The maximum possible score of 100 points suggests that the test measures a broad range of mechanical abilities. The fact that the test is administered twice within a 2-week period also indicates that it may be designed to assess changes or improvements in mechanical skills over time. Based on the given results, it appears that the new mechanical aptitude test, which has a maximum possible score of 100 points and is administered twice within a 2-week period, may have inconsistent results or low test-retest reliability. The significant score differences between Time 1 and Time 2 for Basheer, Ben, Flodina, and Miguel suggest that the test may not be a reliable measure of mechanical aptitude.

Learn more about reliability here

https://brainly.com/question/28343205

#SPJ11

The expected number of empty bins when tossing n balls into n bins, with each toss being independent and equally likely, can be determined using the concept of probability.

Let's define the probability that a specific bin remains empty after n tosses as P(empty). Since each ball has n choices, there are n^n possible ways to distribute the balls. To find the probability that a specific bin is empty, we can consider the situation where balls can be tossed into the remaining n-1 bins, resulting in (n-1)^n possible distributions. Therefore, P(empty) = ((n-1)^n) / (n^n).

Now, to calculate the expected number of empty bins, we can use the concept of linearity of expectation. The expected value of the sum of random variables is equal to the sum of the expected values of the individual random variables. In this case, the random variables represent the empty status of each bin (1 if empty, 0 if not).

The expected number of empty bins is the sum of the probabilities of each bin being empty, which is n * P(empty). So, the expected number of empty bins = n * (((n-1)^n) / (n^n)).

Using this formula, you can determine the expected number of empty bins when n balls are tossed into n bins independently and with equal likelihood.

Learn more about independent  here:

https://brainly.com/question/15375461

#SPJ11