C(i). A body weighs 600g in air and 400g in water. Calculate;
i. Up thrust of the body
ii. Volume of the body
iii. Relative density of the solid
iv. Density of the solid

The best answer is true. Yes, control rods are used to slow down the reaction in the reactor core when the core becomes too hot.

A nuclear reactor, often known as an atomic pile, is a device that initiates and controls nuclear chain reactions or nuclear fusion processes.

Nuclear reactors are used in nuclear power plants to generate energy as well as in nuclear marine propulsion.

Control rods are employed in nuclear reactors because the processes that occur in a nuclear reactor are very exothermic.

As a result, when these control rods are infused into a nuclear reactor, they absorb neutrons and aid in the management of the chain reaction. As a result, the rate of the chain reaction is brought under control.

As a result, we may infer that the statement control rods are employed to slow down the reaction in the reactor core when it gets too hot is correct.

Hence the best answer is true. Yes, control rods are used to slow down the reaction in the reactor core when the core becomes too hot.

To learn more about the nuclear reactor refer to the link;

https://brainly.com/question/896706

Distance = (speed) x (time)  <== This is important.  You should memorize it.

Distance = (30 km/hr) x (3 hr)

Distance = (30 x 3) (km/hr x hr)

Distance = 90 km

Question :-

Answer :-

Explanation :-

As per the provided information in the given question, we have been given that the Current of the Device is 3.0 Ampere . The Resistance is given as 6.0 Ohm's . And, we have been asked to calculate the Potential Difference .

As we know ,

Where ,

Therefore , by Substituting the given values in the above Formula :-

[tex] \sf {\dag \: \: \: Potential \: Difference \: = \: Current \: \times \: Resistance} [/tex]

[tex] \sf {\Longrightarrow \: \: \: \sf Potential \: Difference \: = \: 3.0 \: \times \: 6.0} [/tex]

[tex] \sf {\Longrightarrow \: \: \: \sf Potential \: Difference \: = \: 3 \: \times \: 6} [/tex]

[tex] \bf {\Longrightarrow \: \: \: \bf {Potential \: Difference \: = \: 18 \: }} [/tex]

Hence :-

[tex] \underline {\rule {210pt}{4pt}} [/tex]

Additional Information :-

[tex] \Longrightarrow \: \: \: \sf {Voltage \: = \: Current \: \times \: Resistance} [/tex]

[tex]\Longrightarrow \: \: \: \sf {Current \: = \: \dfrac {Voltage}{Resistance} } [/tex]

[tex]\Longrightarrow \: \: \: \sf {Resistance \: = \: \dfrac {Voltage}{Current} } [/tex]

[tex] \underline {\rule {210pt}{4pt}} [/tex]

Note :-

The distance between the image and the mirror is -8.6 cm

A concave mirror has a reflective surface that is curved inward and away from the light source. Concave mirrors reflect light inward to one focal point.

Unlike convex mirrors, the image formed by a concave mirror shows different image types depending on the distance between the object and the mirror.

Let's use the mirror equation to solve the problem:

[tex]\dfrac{1}{f}=\dfrac{1}{d_o}+\dfrac{1}{d_i}[/tex]

where f is the focal length of the mirror,  the distance of the object from the mirror, and  the distance of the image from the mirror.

For a concave mirror, for the sign convention f is considered to be positive. So we can solve the equation for  by using the numbers given in the text of the problem:

[tex]\dfrac{1}{12}=\dfrac{1}{5}+\dfrac{1}{d_i}[/tex]

[tex]\dfrac{1}{d_i}=-\dfrac{7}{60}[/tex]

[tex]d_i=-8.6\ cm[/tex]

Where the negative sign means that the image is virtual, so it is located behind the mirror, at 8.6 cm from the center of the mirror.

Hence the distance between the image and the mirror is -8.6 cm

To know more about concave mirror follow

https://brainly.com/question/1147247

A brown dwarf is a starlike body that do do not have enough mass to ignite hydrogen fusion in their centers.

Brown dwarf refer to a body of substellar that is not huge or big enough to undergo nuclear fusion of o hydrogen into helium in their cores. This formed when there is contraction of gases in the intercellar spaces. The have a mass between 13 to 80 times that of Jupiter.

Therefore, brown dwarf is a starlike body that do don't not have enough mass to ignite hydrogen fusion in their centers.

Learn more about brown dwarf below.

https://brainly.com/question/15722167

The tension does no (zero) work

F· S = W

Since the tension is perpendicular to the direction of motion, and there is no change in S the work done is zero.

Answer:

GPE=(3*11^2)/2

(3*121)/2

363/2

GPE=181.5J

Explanation:

Answer:

nuclear

Explanation:

A: a type of mechanical energy is kinetic, which comes from velocity/movement

C: people produce heat

D: converting food energy into usable energy within the body

A decrease in production of goods could cause the economy to move from point a to point b.

Shifts in the production are due to  many factors that change the output of an economy such as advances in technology, changes in resources, more education or training and changes in the labor force.

So we can conclude that a decrease in production of goods could cause the economy to move from good to poor.

Learn more about economy here: https://brainly.com/question/17996535

The particular temperature at which vaporisation occurs is known as the boiling point of liquid. Volume of water increases when it boils at 100° C. 1 cm3 of water at 100 ° C becomes 1760 cm3 of steam at 100 ° C.

Hope it helps!!!!!!!!!!!!!!!!!!!!! ~~~~~~~~~~~~~~~~~~~

ಥ‿ಥ

Explanation:

[tex]kinetic \: energy = \frac{1}{2} m {v}^{2} [/tex]

[tex]81 = \frac{1}{2}m {(9)}^{2} [/tex]

[tex] \frac{81 \times 2}{81} = m[/tex]

[tex]m = 2kg[/tex]

Answer:

See below ↓

Explanation:

Assuming the motion of a simple pendulum, the time period is given by

The values we have

Solving

Answer:

= 201.53 meters

Explanation:

A car started from rest and accelerated at 9.54 m/s^2 for 6.5 seconds. How much distance was covered by the car?

Use the formula  d = [tex]\frac{at^{2} }{2} ,[/tex]

where d is the distance, t is the time and "a" is the acceleration.
[tex]d=\frac{9*54*6*5^{2} }{2} = 201.53 m[/tex]

I believe the answer to your question would be True

Answer:

The equation of equilibrium at the top of the vertical circle is:

\Sigma F = - N - m\cdot g = - m \cdot \frac{v^{2}}{R}

The speed experimented by the car is:

\frac{N}{m}+g=\frac{v^{2}}{R}

v = \sqrt{R\cdot (\frac{N}{m}+g) }

v = \sqrt{(5\,m)\cdot (\frac{6\,N}{0.8\,kg} +9.807\,\frac{kg}{m^{2}} )}

v\approx 9.302\,\frac{m}{s}

The equation of equilibrium at the bottom of the vertical circle is:

\Sigma F = N - m\cdot g = m \cdot \frac{v^{2}}{R}

The normal force on the car when it is at the bottom of the track is:

N=m\cdot (\frac{v^{2}}{R}+g )

N = (0.8\,kg)\cdot \left(\frac{(9.302\,\frac{m}{s} )^{2}}{5\,m}+ 9.807\,\frac{m}{s^{2}} \right)

N=21.690\,N

Answer:

Only main sequence stars have a well-defined relationship between spectral type and luminosity.

Explanation:

Low-mass stars have much longer lifetimes than high-mass stars.

Answer:

C) The magnitude and direction

Explanation:

Velocity is a vector quantity, meaning that it has both magnitude and direction.

For the momentum, we look at both the direction of the ball (negative, positive) and the magnitude of the velocity (5 m/s, 10 m/s) when figuring out what to use for "v" in p = mv.

The magnitude of the centripetal force on the car is 69.6 N.

This is a force acting on a body in circular path and it is directed to the center around which the body is moving.

To calculate the centripetal force on the car, we use the formula below.

Formula:

Where:

From the question,

Given:

Substitute these values into equation 1

Hence, the magnitude of the centripetal force on the car is 69.6 N.

Learn more about centripetal force here: https://brainly.com/question/20905151

The acceleration of the mass down the plane is determined as (4mg sinθ)/(3mr²).

The acceleration of the mass down the plane is determined by applying the principle of conservation of angular momentum.

Fr = Iα

where;

(mg sinθ)r = Iα

(mg sinθ)r = I(ar)

(mg sinθ) = I(a)

[tex]a = \frac{mg \times sin(\theta)}{I} \\\\a = \frac{mg \times sin(\theta)}{3mr^2/4} \\\\a = \frac{4mg \times sin(\theta)}{3mr^2}[/tex]

Thus, the acceleration of the mass down the plane is determined as (4mg sinθ)/(3mr²).

Learn more about acceleration here: https://brainly.com/question/14344386

The temperature for which the minimum escape energy is 15 times the average kinetic energy of an oxygen molecule is 10,684.4 K.

The temperature for which the minimum escape energy is 15 times the average kinetic energy of an oxygen molecule is determined by applying principle of conservation of energy as shown below;

E = K + U

E = K - GmM/R

0 = K - GmM/R

K = mgR

When the minimum escape energy is 15 times average kinetic energy;

15K = mgR

[tex]15 \times \frac{3}{2} kT = mgR[/tex]

where;

[tex]T = \frac{2mgR}{15 \times 3k} \\\\T = \frac{(2)(5.316 \times 10^{-26})(9.8)(6.371 \times 10^6)}{45(1.38066 \times 10^{-23})} \\\\T = 10,684.4 \ K[/tex]

Thus, the temperature for which the minimum escape energy is 15 times the average kinetic energy of an oxygen molecule is 10,684.4 K.

Learn more about minimum escape energy here: https://brainly.com/question/16008094

Answer:

The triboelectic charging process (a.k.a., charging by friction) results in a transfer of electrons between the two objects that are rubbed together. Rubber has a much greater attraction for electrons than animal fur.

Explanation:

HOPE IT HELP^_^

THANKS^_^

The statement 'a distant star gives off a visible range of light whose color depends on its temperature' is supported by the wave model​.

The wavelength can be defined as the periodic distance of a given wave that repeats in a constant way.

The emissivity of particles is a function of both wavelength and temperature of a given material/object. Visible wavelengths range from 700 nm to 400 nm (violet color).

Star temperature largely determines its color, blue stars are warmer than yellow and red stars, and red stars are cooler than yellow stars.

Learn more about visible wavelengths here:

https://brainly.com/question/10728818

The triangular crest. shows the resulting wave when they cross at a point x. The meeting point of two waves is known as wave interference ia x.

A wave pulse is a short, non-periodic wave that is formed by a single energy input rather than a continuous or repeated energy input.

Wave interference is the result of multiple waves interacting. There are two types of interference: constructive and destructive.

The relative displacement of the waves is the difference between the two. Wave beats are frequently caused by wave interference.

Hence the triangular crest. shows the resulting wave when they cross at a point x.

To learn more about the wave pulse refer to the link;

https://brainly.com/question/1291549

Answer:

B

Explanation:

Got it right on edge

Hi there!

We can begin by deriving an equation for the orbital radius.

For an object orbiting the earth, it is experiencing a centripetal force due to the force of gravitation.

Recall Newton's Law of Universal Gravitation:
[tex]F_g = \frac{Gm_1m_2}{r^2}[/tex]

G = Gravitational Constant (6.67 × 10⁻¹¹ Nm²/kg²)

m = masses (kg)
r = radius (m)

This is equivalent to the satellite's centripetal force experienced:

[tex]F_c = \frac{m_sv^2}{r}[/tex]

[tex]m_s[/tex] = mass of satellite (kg)

v = velocity (m/s)

r = radius (m)

Set the two equal, and rearrange for the orbital radius of the satellite.

[tex]\frac{Gm_sm_p}{r^2} = \frac{m_sv^2}{r}\\\\\frac{Gm_p}{r} = v^2\\\\r = \frac{Gm_p}{v^2}[/tex]

Notice that the orbital radius of the satellite does NOT depend on the satellite's mass. (we canceled it out).

Now, plug in the given values.

[tex]r = \frac{(6.67\times 10^{-11})(6\times 10^{20})}{17000^2} = \boxed{138.478 m}[/tex]

Answer:

C

Explanation:

Alveoli are tiny functioning structures that compose your lungs. They help with respiration. They have a large total surface area, which is very useful for respiration. The more surface area there is, the more transactions can happen. Which means that breathing will be easier/faster when you have more alveoli. (Please rate this answer if you have time!)

→ Pure substances can be made of atoms that are attracted to each other or atoms that are not attracted to each other. Which type of pure substance can create elaborate structures?

Option c) Atoms that are not attracted to each other because they will form bonds with each other and create a larger structure.

Answer:

Radio

Explanation:

X-rays is 10 x 10^-10

radio is 10⁴

option D

hope it helps...!!!

Answer:

B.

Explanation:

You have to divide.
10.0/20.0 = 0.50

I apologize if it is incorrect-

I hope it helps! Have a great day!

Anygays-