Check Your Understanding: True Stress and Stress A cylindrical specimen of a metal alloy 47.7 mm long and 9.72 mm in diameter is stressed in tension. A true stress of 399 MPa causes the specimen to plastically elongate to a length of 54.4 mm. If it is known that the strain-hardening exponent for this alloy is 0.2, calculate the true stress (in MPa) necessary to plastically elongate a specimen of this same material from a length of 47.7 mm to a length of 57.8 mm.

Answers

Answer 1

Answer:

The answer is "583.042533 MPa".

Explanation:

Solve the following for the real state strain 1:

[tex]\varepsilon_{T}=\In \frac{I_{il}}{I_{01}}[/tex]

Solve the following for the real stress and pressure for the stable.[tex]\sigma_{r1}=K(\varepsilon_{r1})^{n}[/tex]

[tex]K=\frac{\sigma_{r1}}{[\In \frac{I_{il}}{I_{01}}]^n}[/tex]

Solve the following for the true state stress and stress2.

[tex]\sigma_{r2}=K(\varepsilon_{r2})^n[/tex]

     [tex]=\frac{\sigma_{r1}}{[\In \frac{I_{il}}{I_{01}}]^n} \times [\In \frac{I_{i2}}{I_{02}}]^n\\\\=\frac{399 \ MPa}{[In \frac{54.4}{47.7}]^{0.2}} \times [In \frac{57.8}{47.7}]^{0.2}\\\\ =\frac{399 \ MPa}{[ In (1.14046122)]^{0.2}} \times [In (1.21174004)]^{0.2}\\\\ =\frac{399 \ MPa}{[ In (1.02663509)]} \times [In 1.03915873]\\\\=\frac{399 \ MPa}{0.0114161042} \times 0.0166818905\\\\= 399 \ MPa \times 1.46125948\\\\=583.042533\ \ MPa[/tex]


Related Questions

to find the shortest path so that each vertice is visited in an algorithm where you check all combinations, your big o would be?

Answers

To find the shortest path in an algorithm where each vertex is visited and you check all combinations, your Big O complexity would be O(n!).

This is because there are n! (factorial) permutations of the vertices, and you need to examine each one to find the shortest path.

The big O notation for checking all combinations to find the shortest path that visits each vertex is O(n!), where n is the number of vertices. This is because the number of possible combinations grows factorially with the number of vertices, resulting in a very long answer time for large graphs. Therefore, this approach is not feasible for large graphs and more efficient algorithms should be used, such as Dijkstra's algorithm or A* algorithm.

To know more about complexity visit :-

https://brainly.com/question/31836111

#SPJ11

define the homogeneous nucleation process for the solidification of a pure metal

Answers

Once the nucleation process is initiated, the formed nuclei can grow further by the addition of atoms from the surrounding liquid, leading to the solidification of the entire volume.

Homogeneous nucleation is a process that occurs during the solidification of a pure metal where the formation of solid nuclei takes place within the bulk liquid without the presence of any foreign particles or impurities. It is the initial step in the solidification process and plays a crucial role in determining the microstructure and properties of the solidified material.

During homogeneous nucleation, the liquid metal undergoes a phase transformation from the liquid phase to the solid phase. This transformation begins with the formation of tiny solid clusters or nuclei within the liquid. These nuclei act as the building blocks for the subsequent growth of the solid phase.

The nucleation process is driven by the reduction in Gibbs free energy associated with the formation of the solid phase. However, nucleation is a thermodynamically unfavorable process due to the energy required to form new solid-liquid interfaces. As a result, nucleation is a stochastic process, and the formation of nuclei is a rare event that requires the presence of highly favorable conditions.

To know more about nucleation process,

https://brainly.com/question/31665493

#SPJ11

in the contingency table we have (r - 1) times (c - 1) degrees of freedom (r is the number of rows and c is the number of columns). true false

Answers

It is false that in the contingency table we have (r - 1) times (c - 1) degrees of freedom (r is the number of rows and c is the number of columns).

In a contingency table, the degrees of freedom are calculated differently. The degrees of freedom for a contingency table are determined by the formula (r - 1) * (c - 1), where r is the number of rows and c is the number of columns.

This formula represents the number of independent cells in the contingency table that can be freely varied without affecting the totals.

The degrees of freedom are associated with the chi-square test, which is commonly used to analyze the association between two categorical variables in a contingency table.

Thus, the given statement is false.

For more details regarding contingency table, visit:

https://brainly.com/question/30920745

#SPJ1

mimo ________. mimo ________. both a and b neither a nor b increases throughput lowers propagation distance

Answers

MIMO technology can increase throughput, as it allows for the simultaneous transmission of multiple data streams.

What are the benefits of MIMO technology in wireless communication systems?

MIMO stands for Multiple Input Multiple Output, which is a technology used in wireless communication systems to improve performance by utilizing multiple antennas at both the transmitter and receiver.

MIMO technology can increase throughput, as it allows for the simultaneous transmission of multiple data streams. It also lowers propagation distance by exploiting spatial diversity and multipath fading.

Therefore, both statements "MIMO increases throughput" and "MIMO lowers propagation distance" are correct, making option (a) "both a and b" the correct answer.

Learn more about MIMO technology

brainly.com/question/31259027

#SPJ11

A(n) _______________ enables you to use your existing folders to store more data that can fit on a single drive or partition/volumeA. extended partitionB. mount pointC. primary partitionD. secondary partition

Answers

Using a mount point is an effective way to expand your storage capacity without having to create a Newpartition or volume.

The answer to your question is B) mount point. A mount point is a location in a file system where an additional drive or partition can be accessed. It allows you to use your existing folders on your primary partition to store more data that can no longer fit on a single drive or partition.
By creating a mount point, you can connect a new drive or partition to a specific directory on your primary partition, and the new drive or partition becomes a subdirectory of the existing file system. This makes it easier to access and manage the data on the additional drive or partition, as it appears to be part of the existing file system.
For example, if your primary partition is running out of space, you can create a mount point in an existing folder, such as /data, and connect an additional drive or partition to that folder. This will allow you to store more data without having to create a new partition or volume.
In conclusion, using a mount point is an effective way to expand your storage capacity without having to create a newpartition or volume.

To know more about Newpartition .

https://brainly.com/question/31689624

#SPJ11

A mount point enables you to use your existing folders to store more data that can fit on a single drive or partition/volume. Therefore, the correct option is (B) mount point.

A mount point is a location on a file system where an additional storage device or partition can be accessed.

It allows you to use your existing folders to store more data that cannot fit on a single drive or partition.

By mounting a separate partition or storage device to a folder in your existing file system, you can continue to use your current file structure without having to create a separate directory for the new data.

This can be particularly useful for managing large amounts of data or for organizing data into specific categories or projects.

Therefore, the correct option is (B) mount point.

For more such questions on Mount point:

https://brainly.com/question/30320995

#SPJ11

windows xp null modem ppp connect to workplace. TRUE OR FALSE?

Answers

The statement "Windows XP can use a null modem cable for a PPP connection to connect to a workplace" is TRUE.
Here's a step-by-step explanation:
1. Obtain a null modem cable: This is a type of cable used to directly connect two devices, like two computers, without using a modem.
2. Connect the computers: Use the null modem cable to connect the serial ports of both computers.
3. Install communication software: On the Windows XP computer, install the appropriate communication software, like HyperTerminal, which comes with Windows XP by default.
4. Configure the PPP connection: In the communication software, set up a new connection and configure the settings, including the serial port, baud rate, and parity.
5. Start the PPP connection: Initiate the PPP connection in the communication software, which will establish a connection between the two computers.
6. Configure the network settings: On the Windows XP computer, set up the appropriate IP address, subnet mask, and other necessary network settings for the connection to the workplace.
7. Test the connection: Verify that the Windows XP computer can access the workplace's network resources, such as shared folders or printers, via the established PPP connection.
In summary, Windows XP can indeed use a null modem cable for a PPP connection to connect to a workplace.

To know more about Windows XP visit:

https://brainly.com/question/31452280

#SPJ11

1 Which is correct based on following two lines of code datatype exint = Value of int Plusinf | Minusinf val x = Value 5; xis an int x + x; results Value 10 O x is not an int

Answers

The correct statement is "x + x; results Value 10" because the datatype "exint" is defined as either "Plusinf" or "Minusinf" added to an integer value "Value of int".

What is the datatype defined in the first line of code?

The correct statement is "x + x; results Value 10" because the datatype "exint" is defined as either "Plusinf" or "Minusinf" added to an integer value "Value of int". In this case, the value of "x" is defined as "Value 5" which is an integer, so it can be added to itself resulting in the value of "10".

The result is a value of type "exint" with the value of "Value 10". So, the statement "x + x; results Value 10" is correct.

The statement "x is not an int" is not correct as "x" is defined as an integer value in the line "val x = Value 5;".

Learn more about Code datatype

brainly.com/question/28340916

#SPJ11

that involve the symbols r, c, and f (note: use ω = 2πf to convert ω’s into f’s ). bring your analysis to the lab to turn in with your lab.

Answers

The symbols r, c, and f are used to calculate various electrical properties in a circuit such as impedance, reactance, phase angle, and power. When working with frequencies, it is important to convert angular frequency ω into frequency f using the formula ω = 2πf.

That involves the symbols r, c, and f. These symbols are often used in electrical circuits and are related to resistance (r), capacitance (c), and frequency (f).
In an AC circuit, the resistance (r) and capacitance (c) are used to calculate the impedance (Z) of the circuit, which is the total resistance offered to the flow of current in the circuit. The impedance is given by the equation Z = √(r² + (1/ωc)²), where ω is the angular frequency and is given by ω = 2πf, where f is the frequency in Hz.
In addition to impedance, the symbols r, c, and f are also used to calculate other important electrical properties such as reactance, phase angle, and power. Reactance is the opposition offered to the flow of current by the capacitance or inductance in the circuit and is given by Xc = 1/(ωc) for capacitance. The phase angle is the angle between the voltage and current waveforms in the circuit and is given by tan⁻¹(Xc/r). Lastly, power in the circuit is given by P = VIcos(θ), where V is the voltage, I is the current, and θ is the phase angle.

To learn more about Impedance Here:

https://brainly.com/question/30040649

#SPJ11

how are the items that the estimator will include in each type of overhead determined?

Answers

Estimators typically work closely with project managers, accountants, and relevant Stakeholders to identify and allocate overhead costs appropriately, ensuring accurate cost estimation and allocation

The items included in each type of overhead in a cost estimator are determined based on various factors, including the nature of the project, industry practices, organizational policies, and accounting standards. Here are some common considerations for determining the items included in each type of overhead:

Indirect Costs/General Overhead:Administrative expenses: These include costs related to management, administration, and support functions that are not directly tied to a specific project or production process, such as salaries of executives, accounting staff, legal services, and office supplies.

Facilities costs: This includes expenses related to the use and maintenance of facilities, such as rent, utilities, property taxes, facility maintenance, and security.

Overhead salaries and benefits: Salaries and benefits of employees who work in support functions and are not directly involved in the production process, such as human resources, IT, finance, and marketing personnel.

General office expenses: Costs associated with running the office, such as office equipment, software licenses, communication services, and insurance.

Job-Specific Overhead:Project management costs: Costs related to project planning, coordination, supervision, and project management staff salaries.

Job-specific equipment: Costs associated with renting, maintaining, or depreciating equipment that is directly used for a specific project or job.

Consumables and materials: Costs of materials and supplies used for a specific project, such as construction materials, raw materials, or specialized tools.

Subcontractor costs: Expenses incurred when subcontracting specific tasks or portions of the project to external vendors or subcontractors.

Project-specific insurance: Insurance costs specific to a particular project, such as liability insurance or performance bonds.

It's important to note that the specific items included in each type of overhead can vary depending on the industry, organization, and project requirements. Estimators typically work closely with project managers, accountants, and relevant stakeholders to identify and allocate overhead costs appropriately, ensuring accurate cost estimation and allocation.

To know more about Stakeholders.

https://brainly.com/question/29803578

#SPJ11

9–36 repeat prob. 9–34 using constant specific heats at room temperature.

Answers

Problem 9-36 assumes constant specific heats at room temperature, simplifying the calculation of entropy change by eliminating the need for integration and allowing direct use of specific heat capacity values.

What is the difference between problem 9-34 and problem 9-36 in terms of specific heats?

The given statement refers to problem 9-34, which involves calculating the change in entropy for an ideal gas undergoing a process. In problem 9-36, the same problem is repeated, but with the assumption of constant specific heats at room temperature.

This means that the specific heat capacity values for the gas remain constant throughout the process.

By considering constant specific heats, the calculation of entropy change becomes simplified, as it eliminates the need to integrate specific heat capacity with respect to temperature.

Instead, the specific heat capacity values at room temperature can be directly used in the entropy change calculation, providing a more straightforward solution.

Learn more about specific heats

brainly.com/question/31608647

#SPJ11

Consider the following method. public static String abMethod (String a, String b) int x = a.indexOf(b); while (x >= 0) a = a.substring(0, x) + a.substring (x + b.length()); x=a.indexOf(b); return a; What, if anything, is retumed by the method call abMethod ("sing the song", "ng") ? (A) "si" (B) "si the so". (C) "si the song" (D) "sig the sog" (E) Nothing is returned because a StringIndexOutOfBoundsException is thrown.

Answers

The correct answer is (C) "si the song".This returns the modified String a, which is "si the song".

Let's go through the steps of the method:

Int x = a.indexOf(b); - This line finds the index of the first occurrence of string b within string a. In this case, x will be assigned the value 2.

while (x >= 0) - This initiates a while loop that will continue as long as x is greater than or equal to 0.

A = a.substring(0, x) + a.substring(x + b.length()); - This line removes the substring b from string a by concatenating the substring before b (from index 0 to x) with the substring after b (starting from x + b.length()). In this case, it becomes "si the song" since "ng" is removed.

x = a.indexOf(b); - This line finds the index of the first occurrence of string b within the modified string a. Since "ng" was already removed, the result will be -1, indicating that the string b is not present in a anymore.

The while loop ends as x is -1.

Finally, return a; - This returns the modified string a, which is "si the song".

Therefore, the correct answer is (C) "si the song"

To know more about String .

https://brainly.com/question/29457878

#SPJ11

The method abMethod takes in two String parameters and removes all instances of the second parameter from the first parameter.

When the method is called with abMethod("sing the song", "ng"), it will remove all instances of "ng" from "sing the song" and return the modified String.

The first instance of "ng" is at index 3 in "sing the song", so it removes "ng" from that position resulting in "si the song". Then, it checks for the next instance of "ng" and finds it at index 5, so it removes "ng" from that position resulting in "si the so". Finally, it checks for the last instance of "ng" and finds it at index 8, so it removes "ng" from that position resulting in "sig the sog".

Therefore, the answer is (D) "sig the sog".


learn more about https://brainly.in/question/51515036?referrer=searchResults


#SPJ11

the operation of an angle-of-attack indicating system is based on detection of differential pressure at a point where the airstream flows in a direction

Answers

An angle-of-attack indicating system is designed to provide the pilot with information about the angle at which the aircraft is positioned in relation to the incoming airflow. This is critical information as it allows the pilot to control the lift and speed of the aircraft.

The operation of the system is based on the detection of differential pressure at a specific point in the airflow. The point at which the airflow is measured is usually located at the leading edge of the wing. When the angle of attack changes, the airflow over the wing changes as well. This change in airflow results in a difference in pressure between the top and bottom of the wing. This differential pressure is detected by the angle-of-attack indicating system, which then relays this information to the pilot. By monitoring the angle of attack, pilots can adjust their aircraft's pitch and speed to ensure a safe and efficient flight.

To know more about angle-of-attack visit:

https://brainly.com/question/31475073

#SPJ11

a is truefor every non empty family of sets. let the universe be r, and let a be the empty family of subsets of r. show that is false

Answers

"a is true for every non-empty family of sets" for the empty family of subsets of R (the real numbers) is FALSE.

Analyze this step by step.
1. Define the terms:
  - Universe (U): R (the set of all real numbers)
  - A: the empty family of subsets of R, denoted as ∅
2. Consider the given statement:
  - "a is true for every non-empty family of sets."
3. Examine the case when the family of subsets is empty (A = ∅):
  - Since A is empty, it does not contain any subsets of R. This means it is not a non-empty family of sets.
4. Determine if the statement is false for the empty family of subsets:
  - The given statement specifically mentions "non-empty" family of sets, which implies that the statement does not apply to empty family of sets like A = ∅. So, we cannot conclude whether the statement is true or false for the empty family of subsets, as it is not addressed by the statement.
In conclusion, the given statement "a is true for every non-empty family of sets" does not apply to the empty family of subsets of R (A = ∅). As a result, we cannot show whether the statement is false for the empty family, as it is not within the scope of the statement.

For more questions on subsets

https://brainly.com/question/17514113

#SPJ11

A 500-MVA 20-kV, 60-Hz synchronous generator with reactances Xá = 0.15, Xá = 0.24, Xd 1.1 per unit and time constants T'a = 0.035, T'a = 2.0, TA = 0.20s is connected to a circuit breaker. The generator is operating at 5% above rated voltage and at no-load when a bolted three-phase short circuit occurs on the load side of the breaker. The breaker interrupts the fault 3 cycles after fault inception. Determine (a) the sub-transient fault current in per-unit and kA rms; (b) maximum dc offset as a function of time; and (c) rms asymmetrical fault current, which the breaker interrupts, assuming maximum dc offset.

Answers

The maximum dc offset is 307.94 A, and the rms asymmetrical fault current is 60.87 kA rms.

What is the formula for calculating the rms asymmetrical fault current?

To solve this problem, we can use the following steps:

Step 1: Calculate the per-unit fault impedance

The fault impedance is given by:

Zf = Vf / If

where Vf is the fault voltage and If is the fault current. Since the fault is a bolted three-phase short circuit, Vf is equal to the generator's rated voltage (20 kV) at the fault location. To calculate If, we need to determine the generator's sub-transient reactance.

The sub-transient reactance is given by:

Xd'' = Xd - Xá

where Xd is the direct-axis reactance and Xá is the armature reactance. Therefore, Xd'' = 0.95 per unit.

The sub-transient fault current in per-unit is given by:

If'' = Vf / (3 * Xd'')

If'' = 20 kV / (3 * 0.95)

If'' = 7.02 per unit

Step 2: Convert the per-unit fault current to kA rms

To convert the per-unit fault current to kA rms, we need to know the generator's base MVA and voltage. The base MVA is given as 500 MVA, and the base voltage is 20 kV. Therefore, the base current is:

Ib = Sb / (3 * Vb)

Ib = 500 MVA / (3 * 20 kV)

Ib = 8.66 kA

The fault current in kA rms is given by:

If''_rms = If'' * Ib

If''_rms = 7.02 * 8.66

If''_rms = 60.79 kA rms

Step 3: Calculate the maximum dc offset

The maximum dc offset occurs at t = 2T'A. Therefore, the maximum dc offset is given by:

Idc_max = (1.8 * Vf / Xd'') * e(⁻²)

Idc_max = (1.8 * 20 kV / 0.95) * e(⁻²)

Idc_max = 307.94 A

Step 4: Calculate the rms asymmetrical fault current

The rms asymmetrical fault current is given by:

Iasym_rms = sqrt(Ia² + Idc_max² / 3)

where Ia is the symmetrical fault current. Since the fault is cleared after 3 cycles, the symmetrical fault current can be assumed to be the same as the sub-transient fault current. Therefore,

Ia = If''_rms = 60.79 kA rms

Substituting the values, we get:

Iasym_rms = sqrt((60.79 kA rms)² + (307.94 A)² / 3)

Iasym_rms = 60.87 kA rms

The sub-transient fault current is 7.02 per unit or 60.79 kA rms, the maximum dc offset is 307.94 A, and the rms asymmetrical fault current is 60.87 kA rms.

Learn more about Asymmetrical

brainly.com/question/15741791

#SPJ11

You are a software engineer who works for a company in Seattle. Your company has built a new industrial research laser that is cheaper and more powerful than any other industrial research laser that's ever been built! Your team must write the software that controls the laser firing, cooling, user interface, and data CRUD needs. To complete the software on this project, your Project Plan will define 10 separate Tasks named T1 through T10, and three milestones named M1, M2, and M3. Question 1a) Write a vision statement for the company using Geoffrey Moore's vision template as presented in class. Question 1b) Create a Task Table with these data columns, and fill in the values for them: • Task Name (e.g. T1, T2, etc.) • Effort (in Person-Days) • Duration (in Days) • Dependencies Make up values for effort and duration. The effort AND duration values each must be at least 30 person- days and 30 days, respectively, per Task. Here are the named Milestones: MILESTONE TASKS COMPLETED M1 T1, T2 M2 T3, T5 M3 T6, T8, T9 Your Task Table must reflect the following restrictions, which should be placed in the Dependencies column in your Task Table: A) T3 cannot start until milestone M1 has been reached B) T7 cannot start until milestone M2 has been reached C) T4 cannot state until T3 is complete D) T8 cannot start until T7 is complete E) T10 cannot start until milestones M1, M2, and M3 have been reached. Question 1c) Create a Task Bar Chart for your project modeled after the one presented in our "Project Scheduling" lecture on slide 9. Indicate in this chart the task names, task durations, and milestones, reflecting the needed dependencies, all as specified in question 1b above. Important: Make the total duration of your Task Bar Chart (i.e. the time between the beginning of T1 and the end of T10) be as minimal as possible, and make each Task begin as soon as it can begin. Question 1d) What is the total duration for your project, in days? Question 1e) How many person-days will it take to complete your project?

Answers

The vision statement for the company is to revolutionize industrial research with our cost-effective and high-powered laser technology.

What is the company's vision for industrial research?

The vision statement for the company is to revolutionize industrial research with our cost-effective and high-powered laser technology. We aim to provide a groundbreaking solution that surpasses the capabilities of existing industrial research lasers. By offering a laser that is both cheaper and more powerful, we seek to empower researchers and scientists with advanced tools that enable them to push the boundaries of knowledge and make significant discoveries.

Our software engineering team plays a crucial role in this vision, as we develop the software that controls the laser firing, cooling, user interface, and data management. Through our innovative software solutions, we aim to optimize the laser's performance, enhance user experience, and ensure seamless data management for efficient research workflows.

Learn more about industrial research

brainly.com/question/28178128

#SPJ11

If a certain PWM waveform with a 30 % duty cycle has an RMS voltage of Vrms=Vrms= 1 VV, what will be the RMS voltage if the duty cycle changes to 90 %?

Answers

Thus, the new RMS voltage of the PWM waveform with a duty cycle of 90% is 0.9487V.

The relationship between the duty cycle of a PWM waveform and its RMS voltage.

The duty cycle is the percentage of time the waveform is high, while the RMS voltage is a measure of the waveform's overall power.

When the duty cycle is 30%, it means that the waveform is high for 30% of the time and low for the remaining 70%. In this case, we know that the RMS voltage of the waveform is 1V.

Now, if the duty cycle changes to 90%, it means that the waveform will be high for 90% of the time and low for the remaining 10%. This change in duty cycle will have an impact on the waveform's RMS voltage.

To calculate the new RMS voltage, we can use the following formula:
Vrms_new = Vmax * sqrt(duty cycle)

Where Vmax is the maximum voltage of the waveform. In this case, we assume that Vmax is equal to 1V.
Plugging in the numbers, we get:

Vrms_new = 1V * sqrt(0.9)
Vrms_new = 0.9487V

Therefore, the new RMS voltage of the PWM waveform with a duty cycle of 90% is 0.9487V.

In summary, the change in duty cycle from 30% to 90% has reduced the waveform's RMS voltage. It is important to note that the relationship between duty cycle and RMS voltage is not linear, and changes in duty cycle can have a significant impact on the overall power of the waveform.

Know more about the RMS voltage

https://brainly.com/question/27672220

#SPJ11

To determine the dividing line between Thomas Igor and Oscar Neche, which should you use? a) The measured points by bearing and distance along the North line of Oscar Neche since his deed is most senior. b) The measured center location of Wet Creek as determined in your field survey to preserving riparian ownership rights. c) The measured points by bearing and distance along the South line of Thomas Igor since his survey is the most recent. d) Division of the Nathaniel Adams tract to give Oscar Neche the 18.5 acres called for as the senior claim. e) A line along the Northern gradient boundary of Wet Creek giving the creek bed to the most senior conveyance.

Answers

The dividing line between Thomas Igor and Oscar Neche would be to use option d) Division of the Nathaniel Adams tract to give Oscar Neche the 18.5 acres called for as the senior claim. This would be the most fair and just way to divide the land based on seniority of claims.

Using the measured points along the North line of Oscar Neche could be problematic because it only takes into account one boundary line and may not accurately reflect the entire property. Using the measured center location of Wet Creek may preserve riparian ownership rights, but it may not be the most fair way to divide the land.

Thomas Igor may be the most recent survey, but it may not take into account seniority of claims. Using a line along the Northern gradient boundary of Wet Creek may not accurately reflect the entire property and may not be the most fair way to divide the land. Therefore, Division of the Nathaniel Adams tract to give Oscar Neche the 18.5 acres called for as the senior claim would be the most just and equitable way to determine the dividing line between Thomas Igor and Oscar Neche.

To know more about dividing visit:-

https://brainly.com/question/27937245

#SPJ11

what course should be selected on the omnibearing selector (obs) to make a direct flight from mercer county regional airport (area 3) to the minot vortac (area 1) with a to indication?

Answers

By following some steps, you'll be able to select the appropriate course on the OBS and maintain a direct flight from Mercer County Regional Airport to the Minot VORTAC with a "TO" indication. Remember to account for factors like wind correction and magnetic variation when planning your route.

To make a direct flight from Mercer County Regional Airport (Area 3) to the Minot VORTAC (Area 1) with a "TO" indication, you should follow these steps:

1. Obtain the current aviation sectional chart for the flight area. This chart will provide important information like VOR station locations, frequencies, and magnetic variation.

2. Locate Mercer County Regional Airport (Area 3) and Minot VORTAC (Area 1) on the chart.

3. Using a navigation plotter or protractor, determine the magnetic bearing from the departure airport (Mercer County) to the destination VORTAC (Minot). This bearing is the course you'll need to set on the Omnibearing Selector (OBS) to maintain a direct flight path.

4. Before departure, tune your NAV radio to the Minot VORTAC frequency, which can be found on the sectional chart. The DME (Distance Measuring Equipment) will display the distance to the VORTAC.

5. Set the magnetic bearing you determined earlier on the OBS. A "TO" indication will appear on the CDI (Course Deviation Indicator) or HSI (Horizontal Situation Indicator), showing that you're flying towards the Minot VORTAC.

Learn more about magnetic variation here:-

https://brainly.com/question/11510990

#SPJ11

design a simple, spur gear train for a ratio of 6:1 and a diametral pitch of 5. specify pitch diameters and numbers of teeth. calculate the contact ratio.

Answers

To design a simple spur gear train for a ratio of 6:1 and a diametral pitch of 5, we can use the following steps:

1. Determine the pitch diameter of the driver gear:

Pitch diameter = Number of teeth / Diametral pitch = N1 / P = N1 / 5

Let's assume N1 = 30 teeth, then pitch diameter of driver gear = 30 / 5 = 6 inches.

2. Determine the pitch diameter of the driven gear:

Pitch diameter = Number of teeth / Diametral pitch = N2 / P = N2 / 5

To get a 6:1 ratio, we can use the formula N2 = 6N1.

So, N2 = 6 x 30 = 180 teeth

Pitch diameter of driven gear = 180 / 5 = 36 inches.

3. Calculate the contact ratio:

Contact ratio = (2 x Square root of (Pitch diameter of smaller gear / Pitch diameter of larger gear)) / Number of teeth in pinion

Contact ratio = (2 x sqrt(6)) / 30 = 0.522

Therefore, the pitch diameters and numbers of teeth for the driver and driven gears are 6 inches and 30 teeth, and 36 inches and 180 teeth, respectively. The contact ratio for this gear train is 0.522.

To know more about design a simple spur gear train, visit:

brainly.com/question/31805396

#SPJ11

how can an organization help prevent social engineering attacks? (select two.)

Answers

Two ways an organization can help prevent social engineering attacks are:

1. Employee Training: Organizations can train their employees to recognize and avoid social engineering attacks. Employees should be educated on the different types of social engineering attacks, such as phishing and pretexting, and how to identify them. Additionally, employees should be trained on how to respond to social engineering attacks, such as not providing sensitive information over the phone or email.

2. Strict Access Controls: Organizations can implement strict access controls to limit the amount of sensitive information that employees have access to. This can include limiting access to certain databases or files, and requiring multi-factor authentication to access sensitive systems. By limiting access to sensitive information, organizations can reduce the risk of social engineering attacks.

When passing by pointer ... the pointer itself is passed by value. The value in this method is that we can use the pointer to make changes in memory.a.trueb.false

Answers

The statement is true. When passing by pointer, the pointer itself is passed by value, and the value in this method lies in our ability to use the pointer to make changes in memory while keeping the original pointer unchanged.

When working with pointers in programming, it is important to understand the concept of passing by pointer and passing by value. In passing by pointer, the pointer itself is passed to a function, allowing the function to make changes to the memory location pointed to by the pointer. However, it is important to note that even when passing by pointer, the pointer itself is passed by value. This means that a copy of the pointer's value is passed to the function, rather than the original pointer. This can sometimes lead to confusion, as changes made to the pointer within the function will not be reflected outside of the function.

Overall, passing by pointer is a useful technique for allowing functions to manipulate memory locations pointed to by a pointer. However, it is important to understand the concept of passing by value, as well as the limitations and potential issues that can arise when working with pointers. By keeping these factors in mind, programmers can effectively utilize pointers in their code while minimizing errors and bugs.

To learn more about pointer, visit:

https://brainly.com/question/31666990

#SPJ11

if the ultimate shear stress for the plate is 15 ksi, the required p to make the punch is : a. 14.85 ksi Ob. 2.35 in2 O c. 35.3 kips o d. 35 lbs

Answers

If the ultimate shear stress for the plate is 15 ksi, the required p to make the punch is 35.3 kips. The correct option is C: 35.3 kips.

We need a force of 35.3 kips to make the punch, given the ultimate shear stress for the plate is 15 ksi and the required area of the punch is 2.35 in2. We know that the ultimate shear stress for the plate is 15 ksi (kips per square inch), and we can assume that the area of the punch is what we need to find (since the force required to make the punch will depend on the area of the punch).

Shear stress (τ) = Force (F) / Area (A)
So we can rearrange the equation to solve for the area:
Area (A) = Force (F) / Shear stress (τ)
Plugging in the given shear stress of 15 ksi and the force required to make the punch (which we don't know yet, so we'll use a variable p), we get:
A = p / 15
We're looking for the value of p that will give us the required area, so we can rearrange the equation again:
p = A * 15
Now we just need to use the area given in one of the answer options to solve for p:
p = 2.35 * 15 = 35.3 kips

To know more about ultimate visit:-

https://brainly.com/question/29054304

#SPJ11

Air is compressed in an Otto cycle beginning at 35 °C and 0.1 MPa. The maximum temperature of the process is 1100 °C and the compression ratio is 7. Find (a) the pressure and temperature at all points of the cycle, (b) the heat that must be supplied to the process per unit mass (kg) of air, the work done per unit mass of air, and (c) the efficiency of the cycle.

Answers

To find the pressure and temperature at all points of an Otto cycle given compression ratio, maximum temperature, and initial conditions, and to determine the heat supplied, work done, and efficiency of the cycle, one needs to use the equations and relationships of the Otto cycle, specific heat capacity at constant volume, and the ratio of specific heats for the air.

To solve the problem, we can use the equations and relationships of the Otto cycle.

Given:

Initial conditions: T1 = 35 °C, P1 = 0.1 MPa

Maximum temperature: Tmax = 1100 °C

Compression ratio: r = 7

(a) Pressure and temperature at all points of the cycle:

Isentropic compression (1-2):

Using the compression ratio (r), we can calculate the pressure at point 2 (P2) using the formula:

P2 = r * P1

Constant volume heat addition (2-3):

The temperature at point 3 (T3) is equal to Tmax (1100 °C), and the pressure (P3) is the same as P2.

Isentropic expansion (3-4):

Using the compression ratio (r), we can calculate the pressure at point 4 (P4) using the formula:

P4 = P1

Constant volume heat rejection (4-1):

The temperature at point 1 (T1) is the same as the initial temperature, and the pressure (P1) remains the same.

(b) Heat supplied, work done, and efficiency of the cycle:

The heat supplied per unit mass of air (q) can be calculated as:

q = C_v * (T3 - T2)

The work done per unit mass of air (w) is given by:

w = C_v * (T3 - T4)

The efficiency of the cycle (η) is given by the formula:

η = 1 - (1 / r^(γ-1))

Note: In the above equations, C_v represents the specific heat capacity at constant volume, and γ is the ratio of specific heats.

To know more about Otto cycle,

https://brainly.com/question/14619386

#SPJ11

Consider a thin-walled, metallic tube of length L = 1 m
and inside diameter Di = 3 mm. Water enters the tube at
m = 0.015 kg/s and Tm,i = 97°C.
(a) What is the outlet temperature of the water if the
tube surface temperature is maintained at 27°C?
(b) If a 0.5-mm-thick layer of insulation of k = 0.05
W/m ⋅ K is applied to the tube and its outer surface
is maintained at 27°C, what is the outlet temperature
of the water?
(c) If the outer surface of the insulation is no longer
maintained at 27°C but is allowed to exchange heat
by free convection with ambient air at 27°C, what
is the outlet temperature of the water? The free
convection heat transfer coefficient is 5 W/m2 ⋅ K.

Answers

The outlet temperature of the water is 97°C in (a), approximately 96.964°C in (b) with insulation, and approximately 96.884°C in (c) with free convection heat transfer.

(a) To calculate the outlet temperature of the water when the tube surface temperature is maintained at 27°C, we can use the concept of energy balance. The heat transfer rate can be expressed as:

Q = m * Cp * (Tm,o - Tm,i)

Where:

Q is the heat transfer rate

m is the mass flow rate of water

Cp is the specific heat capacity of water

Tm,o is the outlet temperature of the water

Tm,i is the inlet temperature of the water

Since the tube surface temperature is maintained at 27°C, we can assume that there is no heat transfer between the water and the tube. Therefore, the heat transfer rate is zero:

Q = 0

From the energy balance equation, we have:

0 = m * Cp * (Tm,o - Tm,i)

Solving for Tm,o:

Tm,o = Tm,i

Substituting the given values:

Tm,o = 97°C

Therefore, the outlet temperature of the water is 97°C.

(b) With the insulation applied to the tube, the heat transfer rate can be expressed as:

Q = m * Cp * (Tm,o - Tm,i) = k * A * (Tm,i - Ts)

Where:

Q is the heat transfer rate

k is the thermal conductivity of the insulation

A is the surface area of the tube

Ts is the outer surface temperature of the insulation

Since the outer surface of the insulation is maintained at 27°C, we have:

Q = m * Cp * (Tm,o - Tm,i) = k * A * (Tm,i - 27)

Solving for Tm,o:

Tm,o = Tm,i - (k * A * (Tm,i - 27)) / (m * Cp)

Substituting the given values:

Tm,o = 97 - (0.05 * 2π * (L * Di) * (97 - 27)) / (0.015 * Cp)

Calculating the expression:

Tm,o ≈ 96.964°C

Therefore, the outlet temperature of the water with insulation is approximately 96.964°C.

(c) With free convection heat transfer to the ambient air, the heat transfer rate can be expressed as:

Q = m * Cp * (Tm,o - Tm,i) = h * A * (Tm,i - Ta)

Where:

Q is the heat transfer rate

h is the convective heat transfer coefficient

A is the surface area of the insulation

Ta is the ambient air temperature

We are given that the convective heat transfer coefficient is 5 W/m2 ⋅ K and the ambient air temperature is 27°C.

Solving for Tm,o:

Tm,o = Tm,i - (h * A * (Tm,i - Ta)) / (m * Cp)

Substituting the given values:

Tm,o = 97 - (5 * 2π * ((L + 2 * 0.5) * (Di + 2 * 0.5)) * (97 - 27)) / (0.015 * Cp)

Calculating the expression:

Tm,o ≈ 96.884°C

Therefore, the outlet temperature of the water with free convection heat transfer is approximately 96.884°C.

To know more about convection heat transfer,

https://brainly.com/question/276731

#SPJ11

What priority used by the System Log Daemon indicates a very serious system condition that would normally be broadcast to all users?
a. alert
b. panic
c. crit
d. error

Answers

The priority used by the System Log Daemon that indicates a very serious system condition that would normally be broadcast to all users is option b. panic.

A CPU is trying to transfer 16 KB of data from external memory to its memory using a 64-bit bus. Compute the time required for the entire transfer if the clock cycles per data transfer is 4. Assume the bus runs at 10 MHz and has a total overhead of 2 clock cycles per data transfer. How much data can be transferred from the external memory in 10 ms?

Answers

To compute the time required for the entire transfer, we first need to calculate the number of clock cycles required for transferring 16 KB of data. Since the bus is 64-bit, the number of data transfers required is 16 KB/8 bytes = 2,048 transfers. Since there is a total overhead of 2 clock cycles per data transfer, the total number of clock cycles required for the transfer would be (2 + 4) * 2,048 = 14,336 clock cycles.


Now, we know that the bus runs at 10 MHz, which means it can transfer 10 million cycles per second. Therefore, the time required for the entire transfer would be 14,336 / 10 million = 1.4336 milliseconds. To compute how much data can be transferred from the external memory in 10 ms, we can use the following formula:  Data transferred = (Bus bandwidth x Time) - Overheads . Here, the bus bandwidth is 64 bits/clock cycle x 10 MHz = 640 MB/s. The overheads for each data transfer are 2 clock cycles, so the total overhead for 2,048 transfers would be 4,096 clock cycles. Therefore, the amount of data that can be transferred from the external memory in 10 ms would be: Data transferred = (640 MB/s x 0.01 s) - 4,096 x 8 bytes = 6.4 MB - 32 KB = 6.368 MB. In conclusion, the time required for transferring 16 KB of data from external memory to its memory using a 64-bit bus with 4 clock cycles per data transfer and 2 clock cycle overheads per data transfer is 1.4336 milliseconds. Additionally, in 10 ms, a maximum of 6.368 MB of data can be transferred from external memory.

Learn more about data here

https://brainly.com/question/30395228

#SPJ11

This problem is in java language
Consider a singly linked list, myList (which of type LList), having an even number (size) of nodes. Write the following method, removeHalf(LList), to eliminate the first half of the list:
The modified list should only contain nodes from the second half of the original list.
Your method, removeHalf(LList), should return the number of nodes in the new list.
public class Node { public Node next; } public class LList { public int size; public Node head; } public int removeHalf(LList myList) { // YOUR CODE HERE
}

Answers

Here's the code to implement the removeHalf() method in Java:

public int removeHalf(LList myList) {
   int count = 0;
   Node current = myList.head;
   while (current != null && current.next != null) {
       count++;
       current = current.next.next;
   }
   myList.size = count;
   myList.head = current;
   return count;
}

In this method, we start by initializing the count to zero and getting the current node as the head of the linked list. Then, we use a while loop to iterate through the linked list, counting each node and moving the current pointer two steps ahead at each iteration. This is because we want to skip every other node in the first half of the linked list.

Once we have counted the nodes in the first half, we update the size of the linked list and set the head to the current node, effectively removing the first half of the list. Finally, we return the count, which is the number of nodes in the new list (i.e., the second half of the original list).


learn more about https://brainly.in/question/11706597


#SPJ11

Given G(s)H(s)=(s+7) / (s+2)(s+1)s+10 find the s-plane region that results in a percent overshoot less than 25% and a 2% settling time less than 10 seconds. (25 Pts.)

Answers

To determine the s-plane region that satisfies the given requirements of a percent overshoot less than 25% and a 2% settling time less than 10 seconds, we need to analyze the system's poles and use the damping ratio (ζ) and natural frequency (ωn) criteria.

The characteristic equation of the system is obtained by setting the denominator of G(s)H(s) equal to zero. In this case, it is (s + 2)(s + 1)(s + 10) = 0, which gives us the poles -2, -1, and -10. The percent overshoot is related to the damping ratio (ζ). By using the standard formulas, we can calculate the damping ratio that satisfies the percent overshoot requirement. However, since the transfer function G(s)H(s) is a first-order system (has only one pole at the origin), it does not exhibit overshoot behavior. The settling time is determined by the dominant pole, which is the pole with the largest real part. In this case, the dominant pole is -10. The settling time is defined as the time it takes for the system's response to reach and stay within 2% of the final value. To achieve a settling time less than 10 seconds, the dominant pole should have a real part greater than -2.3. In summary, for the given transfer function G(s)H(s), there is no percent overshoot as it is a first-order system. The settling time requirement of 2% within 10 seconds is determined by the dominant pole at -10. The s-plane region that satisfies these requirements lies to the left of the line with a real part greater than -2.3.

Learn more about damping ratio here:

https://brainly.com/question/20115234

#SPJ11

A bolted joint with a joint coefficient of 0.2 experiences an alternating tension from o KN to The bolt is initially preloaded to 10 kN. What is most nearly the maximum tensile force in the boitr?

Answers

The maximum tensile force will be greater than 10 kN (the initial preload) and less than the applied alternating tension amplitude multiplied by the joint coefficient, plus the preload.

The joint coefficient of 0.2 means that only 20% of the force applied to the joint will be transferred through the bolt. Therefore, the maximum tensile force in the bolt can be calculated by multiplying the applied alternating tension by the joint coefficient and then adding the preloaded force.

Assuming the alternating tension is sinusoidal, the maximum tensile force can be found using the formula:

Maximum Tensile Force = (Joint Coefficient x Alternating Tension Amplitude) + Preloaded Force

Since the alternating tension is not provided, we cannot provide an exact value for the maximum tensile force. However, we can conclude that the maximum tensile force will be greater than 10 kN (the initial preload) and less than the applied alternating tension amplitude multiplied by the joint coefficient, plus the preload. It is important to note that the maximum tensile force in the bolt should not exceed the bolt's yield strength to prevent permanent damage or failure.

Learn more about tensile force here:

https://brainly.com/question/24220361

#SPJ11

1. True or False questions: a. Quantum mechanics is necessary to understand the structure of matter and the conduction properties of semiconductors. b. Boron (B) acts as a donor in Si. C. If both terminals of a PN junction are grounded (Vo = 0) the electrostatic potential Ao must equal zero. d. In thermal equilibrium, all nodes of an electronic system are at ground potential. e. The term saturation refers to similar regions in the !(V) characteristics of BJTs and FETS.

Answers

The statement is true. Quantum mechanics is necessary to understand the structure of matter and the conduction properties of semiconductors.

The statement is true. If both terminals of a PN junction are grounded, the electrostatic potential must be zero. This is because there is no potential difference between the two terminals, so the potential energy of an electron moving from one side to the other is zero.

In thermal equilibrium, all nodes of an electronic system are at ground potential. False: In thermal equilibrium, all nodes of an electronic system are at the same potential, but not necessarily at ground potential. The term saturation refers to similar regions in the I(V) characteristics of BJTs and FETs.

To know more about Quantum mechanics visit:-

https://brainly.com/question/31323813

#SPJ11

Other Questions
queen emma and her husband were responsible for providing recourse to which social care with her land trust? a thread's block method is invoked automatically by start. true false microblogging consists of short messages exchanged on social media networks.T/F One of the most important steps in estimating cash flow is to determine the ______ cash flows.Multiple choice question.A. speciousB. operatingC. relevant There are two scenes in which Jonas shares the same memory with Gabe.What are they, and what is their purpose? What important fact about the wounded soldiers is reflected by the repetition of the bolded sentences in the excerpts from "In Another Country" by Ernest Hemingway? A. It establishes the irony that, although the wounded soldiers have physically left the warfront, the war continues to haunt them psychologically. B. It shows the gradual loss of hope and growing depression of the wounded soldiers and their need for distractions. C. It establishes the wounded soldiers determination to shun war and disobey military commands to return to the front after they recover. D. It shows the wounded soldiers sadness and disappointment at the lack of gratitude from the people they risked their lives to protect. E. It shows the wounded soldiers belief that the war would never end, even as thousands of soldiers were killed or wounded and sent to hospitals. a. Prepare the journal entry to record Jevonte Company?s issuance of 36,000 shares of its common stock assuming the shares have a $2 par value and sell for $18 cash per share.b. Prepare the journal entry to record Jevonte Company?s issuance of 36,000 shares of its common stock assuming the shares have a $2 stated value and sell for $18 cash per share. Who's holding the rank in today's daily leaderboard?tell both 1st, 2nd and 3rd The data can best be used to support which of the following claims about the mechanism for regulating ferritin gene expression? The gene sequences responsible for the iron-mediated changed in ferritin proteins levels are highly conserved and are called iron response elements (IREs). a low-budget strategy that focuses on personally interacting with a target group by promoting products and services through surprise or other unconventional means is called ______. Evaluate the surface integral.S x2z2 dSS is the part of the cone z2 = x2 + y2 that lies between the planes z = 3 and z = 5. ______________, ______________, or untimely information can have detrimental impacts on decision making. Find the x value where the function g (x) = xe^-2x attains a local maximum. Enter the exact answer. If there is none, enter NA. The local maximum is x= _____ [Thami and Isabel are going over their notes.] ISABEL: Was he speaking for you as well? THAMI: He speaks for me on nothing! ISABEL: Relax. I know that. That's why I tried to ask you separately and why I'll ask you again. Would you like to come to tea next Sunday to meet my family? It's not a polite invitation. They really want to meet you. THAMI: Me? Why? Are they starting to get nervous? ISABEL: Oh come off it. Thami. Don't be like that. They're always nervous when it comes to me. But this time it happens to be genuine interest. I've told you. I talk about you at home. They know I have a good time with you... that we're a team ... which they are now very proud of incidentally... and that we're cramming like lunatics so that we can put up a good show at the festival. Is it so strange that they want to meet you after all that? Honestly, sometimes dealing with the two of you is like walking on a tight-rope. I'm always scared I'm going to put a foot wrong and ... well, I just hate being scared like that. [A few seconds of truculent silence between the two of them] What is going on, Thami? Between you two? There's something very wrong, isn't there? THAMI: No more than usual. [Act 1, Scene 4] Copyright reserved English First Additional Language/P2 4.2.2 4.2.3 4.2.1 Quote TWO words from the extract to show that Isabel's parents sincerely want to know more about Thami.4.2.4 18 NSC A hopeful. B jovial. C annoyed. D sympathetic. Refer to lines 1-2 (Was he speaking ... me on nothing!"). (a) Who is the 'he' that Isabel and Thami refer to in these lines? (b) Why does Thami respond so fiercely, 'He speaks for me on nothing!' in these lines? In line 8 Isabel says ('Oh come off... be like that '). (a) Choose the correct answer to complete the following sentence. Write only the letter (A-D) next to the question number (4.2.3(a)) in the ANSWER BOOK. Isabel's response to Thami in this line is ... (b) If you were the director of this play, what would you tell Isabel to do while saying this line? State TWO actions. Refer to lines 13-14 ('we can put... at the festival'). (a) Where does the 'festival take place that Isabel refers to in these lines? (b) What will Isabel and Thami be doing at this festival? 4.2.5 Refer to lines 15-16 (Honestly, sometimes dealing... on a tight- rope').(a) when Isabel says walking on a tight-rope, does she mean? this literally or figuratively? (b) Explain your answer to QUESTION 4.2.5(a). (a) When Isabel says 'walking on a tight-rope', does she mean this literally or figuratively? 4.2.6 Why is the following statement FALSE? Isabel has a brother.4.2.7 One of the themes in this play is generational conflict. Discuss this theme. Here we consider f(x) = 3x near x = 8. (a) Find T1(x) and T2(x) centered at x = 8. (b) Separately use both T1(x) and T2(x) to approximate 37.8. (c) Use the Taylor Error Bound to determine the maximum possible values of the errors |T1(7.8) 37.8) and (T2(7.8) 37.8. (d) Compare the actual errors to the guarantees calculated in the previous part. the hormones somatostatin, insulin, and glucagon are all produced by what mixed endocrine/exocrine gland? a proton with mass 1.71027 kg is moving with a speed of 2.8108m/s.(q15, from q14) what is the kinetic energy of this proton? Question 10 (1 point)(08. 03 MC)The following data shows the number of volleyball games 20 students of a classwatched in a month:15 1 4 2 22 10 7 4 3 16 16 21 22 19 19 20 22 16 19 22Which histogram accurately represents this data? (1 point) an abstract method can only be declared in a class that is declared as abstract. group of answer choices true false She decides she wants to become a naturalized citizen for her fourteenth birthday. Which of the following qualifications does Kyleigh already have for citizenship? She can read, speak, write, and understand English.