Categorize each of the following activities as part of software product design analysis (PA), software product design resolution (PR), software engineering design analysis (EA), or software engineering design resolution (ER):
a)Choosing data structures and algorithms
b)Laying out the contents of a window in a user interface
c)Asking clients what they need in a new program
d)Deciding which class should have a certain method
e)Reviewing an SRS to make sure it is complete
f)Reading an SRS to understand how a feature should work
g)Reading an SRS to ensure all requirements are accounted for in a design document
h)Deciding which features should go in each of several releases of a product

An intrusion detection system keeps an eye on system and network resources and activities. It alerts network security when it notices efforts to go over a networked computer environment's security precautions.

Infected portable media, like USB flash drives or external hard drives, are a common way for worms to spread. When you attach the infected drive to your PC, the virus may immediately install.

A computer virus is a piece of software that replicates itself after infecting files or system folders on a computer or network router. Some viruses can impair data files, while others can destroy them.

To know more about detection system visit:-

https://brainly.com/question/13274170

#SPJ4

Linearity is proved by showing it can be written with constants, while time-invariance is proved by showing the system response is independent of time. Non-linearity is proved by showing the cosine function is not linear and time-variance is proved by showing coefficients change with time.

(a) System (a) is linear because it can be written in the form y[n] = a1x[n] + a2x[n-1] + a3y[n-5], where a1, a2, and a3 are constants. It is also time-invariant since the output at any time point is independent of the time at which the input is applied. This can be proved by showing that the system response is the same for any input shifted in time by a constant value.

(b) System (b) is non-linear as it contains the cosine function, which is not a linear operator. It is also time-varying since the coefficients for the output y[n-2] and y[n] depend on the time index n. This can be seen from the fact that the coefficients for cos (pi/6 n) change for each value of n.

Learn more about function here

https://brainly.com/question/29633660

#SPJ4

For a two-lane road with 11-foot lanes, a horizontal curve with a 40-degree central angle has a radius of 250 feet, a degree of 821.14 feet of curvature, and a length of 236.53 feet.

Taking into account such mixed traffic, IRC set the maximum allowable superelevation in plain, undulating, and snow-covered zones at 7.0% or 0.07. A maximum superelevation of 10% has been advised for roads with hills that are not covered with snow.

The following formula can be used to calculate the maximum tolerable lateral acceleration (a) for the design speed (V) and superelevation (e):

a = V^2 / (R * g) + e

where:

V = design speed = 70 miles per hour;

e = superelevation = 0.06 feet per foot; and

g = acceleration due to gravity = 32.2 feet per second.

Plugging in the values, we get:

a = (70 mi/h)^2 / (R * 32.2 ft/s^2) + 0.06 ft/ft

a = 0.0985 / R + 0.06

The maximal tolerable lateral acceleration should be accommodated by a radius of curvature (R). Let's say that R is 250 feet.

By entering R = 250 feet, we obtain:

a = 0.0985 / 250 + 0.06

a = 0.0999

The recommended value of 0.1 ft/s2 is lower than the maximum comfortable lateral acceleration of 0.0999 ft/s2.

Use the following formula to determine the degree of curvature (D):

D = delta * (3,600 / V) * (R / 1,000)

where:

delta = central angle of the curve = 40 degrees

V = design speed = 70 mi/h, R = radius of curvature = 250 ft

Plugging in the values, we get:

D = 40 * (3,600 / 70) * (250 / 1,000)

D = 821.14 ft

Apply the following formula to determine the curve's length (L):

L = (D / 360) * (2 * pi * R)

where:

D = degree of curvature = 821.14 ft

R = radius of curvature = 250 ft

Plugging in the values, we get:

L = (821.14 / 360) * (2 * pi * 250)

L = 236.53 ft

To know more about curve visit:-

https://brainly.com/question/21275014

#SPJ4

It is true that a digital citizen is familiar with how to use technology to become an educated and productive member of the digital world.

Technology is the application of knowledge to the attainment of realistic objectives in a repeatable manner.

A person who is informed about using technology safely and successfully to engage in the digital world is referred to as a "digital citizen."

This includes knowing how to use digital tools for communication, collaboration, and creation as well as being aware of the social and ethical implications of using them.

Thus, the given statement is true.

For more details regarding technology, visit:

https://brainly.com/question/9171028

#SPJ1

The modulus of resilience is calculated as the ratio of the yield strength to the elastic modulus, divided by the shear modulus, and is equal to 5.625 MPa for the tungsten alloy.

The modulus of resilience is a measure of an alloy's ability to absorb energy while subjected to a tensile load and is calculated by dividing the yield strength of the material by the elastic modulus and the shear modulus. In this case, the yield strength of the tungsten alloy is 900 MPa, the elastic modulus is 400 GPa, and the shear modulus is 150 GPa. The modulus of resilience is therefore calculated as 900/400/150 = 5.625 MPa. This means that the tungsten alloy is able to absorb 5.625 MPa of energy before experiencing plastic deformation. The modulus of resilience is an important property for determining the strength of a material and its ability to withstand tensile loads.

Learn more about ratio here

https://brainly.com/question/13419413

#SPJ4

At Wright State, courses are delivered online using Pilot, which can be accessed via WINGS. Use your Campus 'w' username and password to log in.

The graduate online programs at Wright State are among the top in the country. Wright State University's online graduate programs in engineering, business, and nursing have been recognized as some of the finest in the country for 2023 by U.S. News & World Report.

Wright State is pleased to introduce the Take Flight initiative, which will cover the cost of up to 18 hours of undergraduate tuition each semester. This program is part of our commitment to impact the lives of the students and communities we serve.

To know more about engineering visit:-

brainly.com/question/19819958

#SPJ4

A vertical dotted line between columns indicates that only the columns to the left will be printed on the first page when preparing a document for printing. between the columns, a dotted vertical line.

The position of your worksheet as it will appear on a printed page is displayed in the Page Layout view. The Ruler, which displays the size of the margins and lets you drag them, is one of the features of Page Layout view.

The set of coordinates that a cell occupies on a worksheet is called a cell reference. It lets you know where a cell is in the spreadsheet. A cell reference always includes the row number followed by the column letter.

To know more about printed visit :-

https://brainly.com/question/21090861

#SPJ4

Orchestration cloud be the management technique executes a series of tasks in a workflow.

What is Workflow?

A workflow is a series of tasks that are performed in a specific order to achieve a particular outcome. The tasks can be automated, manual, or a combination of both, and are performed by humans, machines, or a combination of both.

Workflows are used in many different industries, such as software development, healthcare, and finance, to manage processes, ensure consistency, and streamline operations. They help organizations to automate repetitive tasks, reduce errors, and increase efficiency, making it possible to complete complex projects in a shorter amount of time.

Orchestration cloud be the management technique executes a series of tasks in a workflow.

Orchestration is a cloud management technique that executes a series of tasks in a workflow. It coordinates and automates the tasks necessary for the deployment, scaling, and management of cloud resources. It ensures that the tasks are executed in the correct order and that dependencies are satisfied. This makes cloud management more efficient and reduces the risk of errors.

Learn more about Orchestration  click here:

https://brainly.com/question/11958641

#SPJ4

This formula shows that the cosine similarity can be expressed in terms of the Euclidean distance when each data object has an L2 length of 1.

Let's assume that we have two vectors, A and B, with an L2 length of 1. Then, the Euclidean distance between A and B can be calculated as ||A - B||_2 = sqrt((A - B) . (A - B)) where ||.||_2 denotes the L2 norm (i.e., Euclidean distance), and . denotes the dot product. Since the L2 length of A and B is 1, we have ||A||_2 = ||B||_2 = 1 Therefore, we can rewrite the Euclidean distance as ||A - B||_2 = sqrt(A.A - 2A.B + B.B),||A - B||_2 = sqrt(2 - 2A.B). We can see that the Euclidean distance and cosine similarity are related through the dot product of A and B is cosine similarity = 1 - (||A - B||_2)^2 / 2.

Learn more about distance here:

https://brainly.com/question/15172156

#SPJ4

The correct technician is Technician A and B. Note it is best practice to ensure that ordered parts should be at the repair facility and inspected before repairs. After repairs have been inspected, then repairs can begin.(Option B). Both actions a requires.

A repair facility is a place where maintenance and repair work is carried out on various types of equipment and machinery.

Inspecting ordered parts is important in a repair facility because it ensures that the right parts are being used for the repair and that they meet the required quality standards.

By checking the parts before they are installed, the repair facility can identify and correct any issues that could cause problems during operation, and avoid costly downtime and repairs in the future.

Learn more about repair facility:
https://brainly.com/question/26333954
#SPJ1

φα" = arctan[(σa'-σ'v)/(2τv)] = arctan[(158.1-132)/(2*132)] = 6.5°

The pore water pressure at failure is equal to the increase in axial stress, which is 158.1 kN/m2.

Given:

To determine the angle of internal friction (φα") and pore water pressure at failure, we can use the following equations:

φα" = arctan[(σa'-σ'v)/(2τv)]

Pore water pressure (u) = σa' - σ'v

where τv is the effective vertical stress, which is equal to σ'v in this case, since the specimen is normally consolidated.

Substituting the given values into the equation for φα", we get:

φα" = arctan[(158.1 - 132)/(2*132)] = 6.5°

Therefore, the angle of internal friction at failure is 6.5°.

Substituting the given values into the equation for pore water pressure, we get:

Pore water pressure (u) = 158.1 - 132 = 26.1 kN/m2

Therefore, the pore water pressure at failure is 26.1 kN/m2.

Learn more about water pressure here:

https://brainly.com/question/9284373

#SPJ4

We can calculate the real and reactive power supplied to the motor from the input current and power factor, the output power from the efficiency and input power,

(a) The total real power supplied to the motor is

240 V x 15 A x 0.8 pf = 2.88 kW

and the reactive power supplied to the motor is

240 V x 15 A x sin(arccos(0.8)) = 2.135 kVAR.

(b) The output power of the motor is the input power multiplied by the efficiency, so it is

2.88 kW x 0.95 = 2.736 kW.

(c) The balanced, parallel, delta-connected impedance that allows the motor to draw the same current at unity pf is equal to the impedance of the motor at its operating point divided by the power factor at the operating point. This can be calculated using the formula

[tex]Z = V^2 / (S * pf)[/tex] , where Z is the impedance, V is the voltage, S is the apparent power, and pf is the power factor.

Solving for Z, we get

[tex]Z = 240^2 / (15 *0.8) = 2304ohm[/tex]

In summary, we can calculate the real and reactive power supplied to the motor from the input current and power factor, the output power from the efficiency and input power, and the impedance for unity power factor from the voltage, current, and power factor at the operating point.

Learn more about impedance:

https://brainly.com/question/30040649

#SPJ4

The natural logarithm of each member in the array X is returned by the formula Y = log(X). Use reallog if you prefer complicated results to error messages for negative and negative complex numbers.

The distinction between log and ln is that log is expressed in terms of base 10, while ln is expressed in terms of base e. As an illustration, log of base 2 is denoted by log2 and log of base e by loge = ln (natural log).

Both natural and common logarithms are subject to the same set of logarithm rules (log, loga, and ln).

To know more about Matlab visit:-

brainly.com/question/17372662

#SPJ4

We can find the maximum load P that can be applied to the system while limiting the displacement at A to 0.5 mm.

To determine the maximum load P that can be applied to the given system while limiting the displacement at A to 0.5 mm, we can use the principles of elasticity and equilibrium.

Assuming that the bars EF and EN have negligible weight and are initially unstretched, we can use the equation for the elongation of a bar under axial load, which is ΔL = PL/EA, where P is the applied load, L is the length of the bar, E is the modulus of elasticity, and A is the cross-sectional area of the bar.

Using this equation for bars EF and EN, we can find the displacement at A in terms of P. Equating this to 0.5 mm, we can solve for the maximum load P that satisfies the given displacement limit.

By performing these calculations, we can find the maximum load P that can be applied to the system while limiting the displacement at A to 0.5 mm. The given dimensions of the system should be used in the calculations.

Learn more about equilibrium :

https://brainly.com/question/13258910

#SPJ4

3.375 is the value without rounding. We look at the portion directly to the right of the midway, which is 0, to round to the nearest half.

The basic rule states that you should always examine the digit that comes after the n-th place in the number when rounding binary fractions to the n-th place. The number should always be rounded down if it's 0. The number should be rounded up if, however, the digit is 1 and any of the subsequent digits are likewise 1.

To convert a fraction to binary, multiply it by two starting with the fraction in question and record the resulting integer and fractional portions. Continue until the resulting fractional component equals zero, multiply by 2 till you do. Simply write out the integer components from each multiplication's results after that.

To know more about fractions visit:-

https://brainly.com/question/10354322

#SPJ4

Answer:

The phase angle between the generator voltage and the resistor voltage in an AC circuit is determined by the relationship between the voltage and the current, as described by Ohm's Law.

At low frequencies, the resistor behaves as a purely resistive element, meaning that the current flowing through it is in phase with the voltage across it. Therefore, the phase angle between the generator voltage and the resistor voltage is 0 degrees.

However, as the frequency of the AC signal increases, the impedance of the resistor becomes more complex, with both resistive and reactive components. The reactive component of the resistor's impedance is proportional to the frequency of the signal, so as the frequency increases, the reactive component becomes more significant.

This reactive component causes the current to lead or lag the voltage, depending on the sign of the reactance. In the case of a purely resistive element, the current leads the voltage by 90 degrees. As the frequency increases, the current leads the voltage by a smaller angle because the reactive component of the resistor's impedance becomes less significant at higher frequencies.

Therefore, the phase angle between the generator voltage and the resistor voltage decreases as the frequency is increased, approaching 0 degrees as the frequency becomes very high.

False. Under electrostatic conditions, the electric field inside a conductor is zero.

What is electric field?

The electric field is confined to the surface of a conductor, and it points away from a region of positive charge and towards a region of negative charge.

This is because the conductor contains free electrons that are free to move, and they will redistribute themselves in response to an electric field in  such a way as it is bound to cancel out the electric field inside the conductor.

The electric field is a field that describes the influence of an electric charge on other charges in its vicinity.

It is a vector field that assigns a direction and magnitude to the force that would be experienced by a test charge placed at a given point in space.

The electric field can be thought of as the gradient of the electric potential, and it is proportional to the force that would be experienced by a unit positive charge placed in that field.

To know more about electric field, visit: https://brainly.com/question/30558925

#SPJ4

A grouping of objects within a domain that provides a means to establish specific policies for governing those objects and that enables object management to be delegated is called an "organizational unit" (OU).

An OU is a container within a domain that can hold objects such as users, groups, computers, and other OUs. By creating OUs, administrators can apply specific policies to the objects within the OU and delegate administrative control to other users. This allows for more efficient and streamlined management of objects within a domain.

Learn more about organizational unit: https://brainly.com/question/17320867

#SPJ11

It selects the company name and average salary from the table where the average salary is greater than the average salary at First Bank Corporation.

(a) RA query to find all companies located in every city in which Union Pacific (UP) is located:

RESULT <- π company_name (Works)

          ÷

          π company_name (σ city = 'UP_city' (π company_name, city (Works)))

where 'UP_city' is the city in which Union Pacific is located.

(b) RA query to find the company with the smallest number of employees:

RESULT <- π company_name (γ company_name; count(person_name) AS num_employees (Works)))

          ⋈

          π company_name, num_employees (γ company_name; count(person_name) AS num_employees (Works)))

(c) RA query to find the company with the largest payroll:

RESULT <- π company_name (γ company_name; sum(salary) AS payroll (Works)))

          ⋈

          π company_name, payroll (γ company_name; sum(salary) AS payroll (Works)))

(d) RA query to find those companies whose employees earn a higher salary, on average, than the average salary at First Bank Corporation:

FIRST_BANK_AVG_SALARY ← π AVG(salary) (σ company_name = 'First Bank Corporation' (Works))

RESULT ← π company_name (γ company_name; AVG(salary) AS avg_salary (Works)))

           ⋈

           π company_name, avg_salary (σ avg_salary > FIRST_BANK_AVG_SALARY (γ company_name; AVG(salary) AS avg_salary (Works))))

Learn more about query :

https://brainly.com/question/14311643

#SPJ4

Type the following to move a file to a different directory and rename it: mv introduction manual/chap1. The intro file is now located in the manual/chap1 subfolder.

Type the following to move a file to a different directory while maintaining its name: MV Chapter 3 Manual If the target file already exists when you use the -b or —backup arguments, mv renames it by adding a suffix to its file name. Instead of overwriting the original file, this preserves a copy of it. Backups come in two flavors: basic and numbered. The built-in Linux program mv can be used to rename files. The following are some of the mv command's useful options: Explains what is being done with -v, —verbose.

Learn more about program here-

https://brainly.com/question/14318106

#SPJ4

The answer is mentioned below.

A functional architecture diagram is a visual representation of the functional components of a system and their relationships to each other. It is commonly used in software engineering, hardware engineering, and system design to understand the different parts of a system and how they interact with each other to achieve a specific set of goals.

The diagram typically shows the different functional components as boxes or blocks, with lines connecting them to indicate the flow of information or control between them. The diagram can also include annotations or notes explaining the purpose of each component and the relationships between them.

A functional architecture diagram with these components would show the Huzzah32 microcontroller as the central component, connected to the other components through various communication channels.

The Huzzah32 microcontroller would have a Bluetooth Low Energy connection to communicate with other devices wirelessly. The Max30009 component would be connected to the microcontroller through a communication channel, and it would be responsible for processing the data from the microcontroller.

The display component would be connected to the microcontroller through a display interface, and it would be used to display the processed data. The SD-card component would be connected to the microcontroller through a data interface, and it would be used to store and retrieve data.

The four buttons would be connected to the microcontroller through input interfaces, and they would be used as inputs for the user.

This functional architecture diagram would provide a high-level view of the various components and their connections, and would give an understanding of how the components work together to provide the desired functionality.

To know more about microcontroller visit:

https://brainly.com/question/15054995

#SPJ1

Answer:

1. Unsafe Act: Employees in the cartoon are not wearing appropriate PPE (personal protective equipment) such as safety glasses, safety boots, and safety helmets.

2. Unsafe Condition: There is an inadequate ventilation system in the workshop, which could lead to the buildup of hazardous gases or vapors, putting workers in danger of breathing related illnesses.

3. Unsafe Act: The working area appears to be overcrowded, with workers standing too close together, which can increase the risk of slips, trips, and falls due to lack of sufficient space.

4. Unsafe Condition: The exit in the cartoon is not clearly marked, which can cause confusion and delay evacuation in case of an emergency.

b.) Cell is the device which converts chemical energy into electrical energy.

How cell converts chemical energy into electrical energy?

A cell, also known as a battery, is a device that converts chemical energy into electrical energy. It consists of two electrodes, called the anode and cathode, separated by an electrolyte. When a circuit is connected to the cell, the chemical reaction between the anode and cathode creates a flow of electrons, generating an electrical current.

The type of cell determines the specific chemical reaction that takes place, but in general, the anode releases electrons while the cathode receives them. The flow of electrons creates a potential difference between the two electrodes, producing a voltage that can be used to power electrical devices.

The energy stored in the chemicals of the cell is gradually depleted as the reaction progresses, leading to a decrease in the cell's voltage and eventual discharge.

To learn more about electrical energy, visit: https://brainly.com/question/29435057

#SPJ4

The boolean expression that is true if the value of x is equal to zero is        'x === 0'.

What is Boolean?
Boolean is a data type used in programming and mathematics to represent two possible values, true or false. It is used to perform logical operations on variables, such as comparison and logic. Boolean values are important in programming because they allow programs to respond to user input or other events, and they can be used to control the flow of a program. Boolean values can also be used to compare numbers, strings, and objects, as well as to determine whether a certain condition is true or false.

To know more about Boolean
https://brainly.com/question/2467366
#SPJ4

If x and y are both negative numbers, then xy>0, then the product of two negative integers is positive. If x > 0 and y > 0, then (x + y)/2 > 0, then the average of two positive integers is positive x, y, and Z.

xP(x) is understood to mean that P(x) is true for all values of x. Example: "Man is mortal" can be expressed as the propositional form xP(x), where P(x) is the predicate, signifying that x is mortal, and m specifies that all men are included in the discourse universe.

Two negative integer differences are not always negative. In other words, there are negative numbers whose difference is not negative: x 0, y 0, and x y 0. ∃x < 0, ∃y < 0,

To know more about mathematical operators visit:-

https://brainly.com/question/20628271

#SPJ4

The Fibonacci sequence is a mathematical sequence in which each term is the sum of the two preceding terms, starting with 0 and 1. So, the sequence starts with 0, 1, 1, 2, 3, 5, 8, 13, 21, 34, and so on.

According to question:

def fibonacci(n):

   if n < 0:

       return -1

   elif n == 0:

       return 0

   elif n == 1:

       return 1

   else:

       return fibonacci(n-1) + fibonacci(n-2)

The function takes an integer n as input and returns the nth value in the Fibonacci sequence using recursion.

The function first checks if the input n is negative. If it is, the function returns -1, as per the problem statement.

Next, it checks if n is equal to 0 or 1. If n is 0, the function returns 0, since the 0th value in the sequence is 0. If n is 1, the function returns 1, since the 1st value in the sequence is 1.

Finally, if n is greater than 1, the function returns the sum of the (n-1)th and (n-2)th values in the sequence, which is calculated using recursion. This is because the nth value in the sequence is the sum of the previous two values.

Let's test the function:

print(fibonacci(7)) # Output: 13

This will output 13, which is the 7th value in the Fibonacci sequence.

To know more about Fibonacci sequence using recursion visit:

https://brainly.com/question/26507758

#SPJ4

Bollards are generally used as a physical barrier to control vehicle access and prevent damage to buildings, pedestrian areas, or other facilities. They are also used to direct traffic and protect pedestrians.

A bollard is a short post typically made of steel, concrete, or wood, placed in the ground and used to control vehicular access to certain areas. Bollards are used to prevent vehicles from entering certain areas, as in parking lots, sidewalks, or pathways, or to prevent vehicles from driving past a certain point, such as a bus stop. Bollards also serve to direct traffic, protect pedestrians, and create a physical barrier between the pedestrian and vehicle areas. In addition, bollards are used in areas where there is a risk of theft or vandalism, as the physical presence of the bollards is a visual deterrent. Bollards come in a variety of shapes, sizes, and materials, and can be either permanent or removable. Permanent bollards are often used in places that require a high level of security, while removable bollards are used in places that require only occasional protection. Bollards are an effective and aesthetically pleasing way of providing security, traffic control, and pedestrian safety.

Learn more about area here

https://brainly.com/question/13194650

#SPJ4

The investment function is a Python function that utilizes the numpy library to compute the value of an investment at a given time. The function takes three 1D numpy arrays p1, p2, and p3 as input, which represent the historical prices of three different stocks.

Here's an example code snippet that defines the investment function as described:

import numpy as np

def investment (p1, p2, p3, assets, t):

   # Compute the value of the investment at time t

   value = np.sum(np.array(assets) * np.array([p1[t], p2[t], p3[t]]))

   return value

To work with the 1D numpy arrays, firstly import the numpy library. The history of the stock prices for three different firms is stored in three numpy arrays, p1, p2, and p3, which are passed to the investing function. The asset tuple with three items, which represents the number of assets for the firms with stock prices of p1, p2, and p3, respectively, is likewise accepted by the function. The time at which we wish to calculate the investment's value is represented by the integer t.

Firstly, generate a numpy array with the stock values of the three companies at time t in order to calculate the investment's worth at that point in time. The assets tuple is then multiplied by this array using element-wise multiplication (*). Lastly, we add up all of the  resulting array to get the total value of the investment at time t.

To know more about Investment function for Numpy visit:

https://brainly.com/question/12907977

#SPJ4

The correct answer is for  a program that displays the table.public class Multiplication Table; import java.util.Scanner. public static void main (String[] args)System. out. print ("Enter number:"); int n=s. nextInt(); Scanner s = new Scanner(System. in);

public class Exercise_02_18 {

public static void main(String[] args) {

 float a, b;

 System.out.println("a        b        pow(a, b)");

 a = 1;

 b = 2;

 System.out.println((int)a + "        " + (int)b +

  "        " + (int)Math.pow(a, b));

 a++;

 b++;

 System.out.println((int)a + "        " + (int)b +

  "        " + (int)Math.pow(a, b));

 a++;

 b++;

 System.out.println((int)a + "        " + (int)b +

  "        " + (int)Math.pow(a, b));

 a++;

 b++;

 System.out.println((int)a + "        " + (int)b +

  "        " + (int)Math.pow(a, b));

 a++;

 b++;

 System.out.println((int)a + "        " + (int)b +

  "        " + (int)Math.pow(a, b));

}

}

To learn more about java click on the link below:

brainly.com/question/29897053

#SPJ4

Option d is correct. Server virtualization increases the total operational capacity of each physical server, resulting in significant cost savings

Server virtualization uses software applications to divide a physical server into multiple unique, isolated virtual servers. Each virtual server can independently run its own operating system.  

The benefits of server virtualization are: Improve server reliability and availability and lower total cost of ownership. More efficient use of physical servers. more efficient use of energy.

There are following virtualization method: Hardware virtualization. In this case, the system provides virtualization by dedicating portions of the CPU to different workloads. Hardware-assisted virtualization. Hypervisor-based virtualization. Paravirtualization. Operating system level virtualization.

To learn more about virtualization visit:

https://brainly.com/question/29620580

#SPJ1