SCIENCE help pls need kna
I answered your question in the photo sent
Good luch
Draw the alkyl bromide(s) you would use in a malonic ester synthesis of ethyl 2-methylbutanoate
The structure of the alkyl bromides used in a malonic ester synthesis of ethyl 2-methyl-4-pentenoate are as drawn in the attached image.
Ethyl 2-methyl-4-pentenoate by Malonic ester synthesis.The malonic ester synthesis is a chemical reaction characterized by the alkylation of diethyl malonate or a similar ester of malonic acid at the carbon alpha (directly adjacent) to both carbonyl groups, and subsequently converted to a substituted acetic acid.
Hence, it follows from the structure of Ethyl 2-methyl-4-pentenoate that the alkyl bromides used are Ethyl bromide and methyl bromide.
Read more on Malonic ester synthesis;
https://brainly.com/question/17237043
Alkyl bromide is a compound that contains a halogen atom in alkane based structure. The structure of the alkyl bromides is attached in the image below.
What is Malonic ester synthesis?Malonic ester synthesis is the alkylation of an ester of malonic acid or diethyl malonate at alpha carbon and is converted to substituted acetic acid.
In malonic ester synthesis of ethyl 2-methyl butanoate, ethyl bromide and methyl bromide are the alkyl bromides used and their images are attached below.
Therefore, alkyl bromides used in the synthesis are ethyl bromide and methyl bromide.
Learn more about alkyl bromide here:
https://brainly.com/question/27181264
#SPJ4
The specific heat capacity of iron 0. 45 j/gk. Find the molar heat capacity for iron
Answer:
The final temperature of the sample is 21.004 °C
Explanation:
The molar heat capacity for iron is 25.130 J/g.c joules per gram per Kelvin.
What is molar heat capacity?The amount of heat needed to increase one temperature of one mole of a substance is called molar heat capacity.
By the formula [tex]\rm \Delta T^\circ c = \Delta Tk[/tex]
Given that c = 0.45 J/g.C
Molar mass of iron is 55.845
Then putting the values in the equation
[tex]c= 0.45 \times 55.845 \\\\c= 25.130 \;J/g.^\circ c[/tex]
Thus, the molar heat capacity for iron is 25.130 J/g.c
Learn more about molar heat capacity
https://brainly.com/question/6363778
#SPJ4
Which images show chemical reactions?
Explanation:
image 3 and 4show chemical reactionsAnswer:
image 3 and 4show chemical reactions
Explanation:
(PLEASE ANSWER!)
2H20 + 2Na --> 2NaOH + H2
which of these is a reactant in this chemical reaction?
A. hydrogen
B. nitrogen
C. oxygen
D. water
Answer:
Water (H2O) and Sodium (Na) are reactants.
Explanation:
2H2O+2Na......2NaOH+H2
In the above reaction the water (H2O) and sodium (Na) are reactants and sodium hydroxide (NaOH) and hydrogen are products.
And this is the single displacement reaction.
Carbon is the main constituent of hydrocarbons. Why some are called unsaturated hydrocarbon? Briefly describe.
Some hydrocarbons are regarded as unsaturated because they contain double or triple bonds between adjacent carbon atoms.
What are hydrocarbons?Hydrocarbons are any organic compounds that contain hydrogen and carbon in its structure.
Hydrocarbons can be grouped into the following based on whether they contain single or double bonds:
Saturated hydrocarbons - contain only single bonds e.g. alkanesUnsaturated hydrocarbons - contain double and triple bonds e.g. alkenesTherefore, it can be said that some hydrocarbons are regarded as unsaturated because they contain double or triple bonds between adjacent carbon atoms.
Learn more about hydrocarbons at: https://brainly.com/question/17578846
One mole of copper atoms is 6.02 x 1023 copper atoms.
True or false?
Answer:
Explanation:
The relation between molecular (formula) mass and molar mass page 44 . To obtain one mole of copper atoms (6.20 x 1023 ne atoms) weigh out 63.55 g copper. The molar mass (M) of a substance is the mass of one mole of entities (atoms, molecules, or formula units) of the substance.
A radioactive nucleus emits a beta particle, then the parent and daughter nuclei are
⇢Isotones
⇢Isotopes
⇢Isomers
⇢Isobars
Answer:
isobars
Explanation:
How?
A radioactive nucleus emits beta particle(Like uranium,radium) So the mass numbers are same for daughter nuclei .They have different atomic numbes .So they are isobars
An unknown gas with a mass of 205 g occupies a volume of 20.0 L at 273 K and 1.00 atm. What is the molar mass of this compound?
The molar mass of this compound is 0.004 m/g
Firstly, molar mass is moles/grams so we need to solve for the number of moles and we were already given the grams (205 g).
So to solve for moles we were given 205 g, 20.0 L, 273 K and 1.00 atm. Knowing these numbers we can plug them into the ideal gas law, PV=nRT
where P is pressure, V is volume, n is number of moles, R is the gas constant (in this case it is 0.08206) and T is the temperature.
[tex]PV=nRT\\\\n=\frac{PV}{RT}\\\\n=\frac{1.00*20.0}{0.08206*273} =0.893[/tex]
Next, we use moles and grams to solve for molar mass:
[tex]\frac{0.893}{205} =0.004[/tex]
Which location represents a period on a periodic table?.
hello people~
Polyethylene terephthalate belongs to which class of synthetic polymer?
A. None of these
B. Polyolefin
C. Nylon
D. Polyester
Answer:
Polyester
Explanation:
Polyethylene terephthalate or shortly known as PET its a clean and strong polyesterIt is used in packaging10) How can you find the density of any gas at standard conditions?
I have 5 questions that need help to answer 1) What are covalent bonds and how do they form ? 2) How do you know which elements and how many of each are in a compound ?
3) How can you find how many valence electrons an atom has ?
4) How many valence electrons do atoms need to be happy? Which elements are the exceptions?
Answer:
covalent bond- a chemical bond that is the sharing of electron pairs between atoms
Two posssible lewis structures for the molecule ch2s are given. determine the formal charge on each atom in both structures
The formal charge on each atom can be known by counting up the number of valence electrons that is present on each atom.
What is Lewis structure?The term Lewis structure is the representation of a compound using its symbols and showing the valence electrons as dots. This question is incomplete as the Lewis structures were not shown.
If it is shown, we can know the formal charge on each atom by counting up the number of valence electrons that is present on each atom.
Learn more about Lewis structure: https://brainly.com/question/4144781
) Which direction does thermal energy flow in the following diagram? *
2 points
Heat flows from the ice cream to the hand.
Heat flows from the hand to the ice cream.
The system is too cold for heat to move.
Answer:
the heat flows from the hand to the ice cream
Explanation:
we produce body heat therefore it moves to the ice cream also there is no possible way the heat could move from the ice cream because the ice cream is cold
Heat flows from the hand to the ice cream. Therefore, the correct option is option B among all the given options.
What is thermal energy?When the temperature rises, a type of energy called thermal energy is produced. The amount of thermal energy usually directly inversely proportional to the object's change in temperature. Thermal energy takes the form of heat. The thermal energy of a substance increases with temperature.
The quicker movements of the substance's atoms and molecules are what cause thermal energy to rise as temperature rises. In some cases, a substance's molecules will separate from one another and leave because the temperature has such high. Unexpectedly, thermal energy also affects the states of matter. Heat flows from the hand to the ice cream.
Therefore, the correct option is option B.
To know more about thermal energy, here:
https://brainly.com/question/30819997
#SPJ7
Justify why sound cannot travel through space.
Answer:
Sound does not travel at all in space. The vacuum of outer space has essentially zero air. Because sound is just vibrating air, space has no air to vibrate and therefore no sound.
rate brainliest!
how many molecules are required to produce 15.8 moles of no2
✥ So, in 1.25 moles of NO2, you would have 1.25 moles of N and (2 x 1.25) 2.50 moles of O.
0.1 mole = Avogadro's number of particles (approx. 6.022x10^23 particles/mol)
So, #oxygen atoms = 2.50 mol x 6.022x10^23 atoms/mol
6.022x10^23 atoms/molOr, approximately 1.51x10^24 oxygen atoms.
Hope this answer helps you ✨
In the electroplating of nickel, 0. 200 faraday of electrical charge is passed through a solution of niso4. What mass of nickel is deposited?.
The mass of nickel, Ni deposited when 0.2 faraday of electrical charge is passed through a solution of NiSO₄ is 5.9 g
Balanced equationNi²⁺ + 2e —> Ni
Molar mass of Ni = 59 g/mol
Mass of Ni from the balanced equation = 1 × 59 = 59 g
Number of faraday = 2
SUMMARY
From the balanced equation above,
2 faraday deposited 59 g of Nickel
How to determine the mass of nickel depositedFrom the balanced equation above,
2 faraday deposited 59 g of Nickel
Therefore,
0.2 faraday will deposit = (0.2 × 59) / 2 = 5.9 g of Nickel
Thus, 5.9 g of Nickel were deposited in the process
Learn more about Faraday's law:
https://brainly.com/question/24795850
Answer:
5.9 grams
Explanation:
You need 2 faraday to deposit 1 mole of Ni (59 grams) because there are 2 moles of electrons in equation:
Ni+2 + 2e- --> Ni(s)
So, 0.2 faraday will deposit 1/10 of that or 5.9 grams of Ni(s).
Stirring iced tea mix into water is a chemical change?
Answer:
true
Explanation:
it changes the chemicals in the water and adds new ones
Can someone do this fill in the blanks
Answer: aragon is in group 0
2. It’s a non metal
3. Group number
Explanation:
what describes the equivalence point on a graph of pH versus the amount of titrant added to a solution
Answer:
Titrant and analyte is a pair of acid and base. ... Equivalence point: point in titration at which the amount of titrant added is just enough to completely neutralize the analyte solution. At the equivalence point in an acid-base titration, moles of base = moles of acid and the solution only contains salt and water.
Explanation:
At the top of a hill, an athlete on a skateboard has X joules of mechanical energy. How much mechanical energy will she have at the bottom of the hill? Ignore the effects of friction. X joules less than X joules more than X joules There is not enough information to know.
If an athlete has X joules of mechanical energy at the top of the hill, he will have the same X amount of energy at the bottom of the hill.
What is mechanical energy?Mechanical energy is the addition of kinetic and potential energy. It can be either kinetic or potential energy.
It is the energy possessed by the position or the motion of the body.
It is the energy present to perform any work.
So, the athlete will have X joule of energy at the top and bottom of the hill.
Thus, the correct option is a, X joules.
Learn more about mechanical energy
https://brainly.com/question/20030300
Answer:
X Joules
Explanation:
Compared to the nucleus 5626fe, what is the density of the nucleus 112 48cd?
For a comparison of the nucleus 5626fe, the density of the nucleus 112 48cd is mathematically given as the same.
n(Cd) / n(Fe)=1
What is the density of the nucleus 112 48cd?Generally, the equation for the density is mathematically given as
d=\frac{A}{4/3}\piR^3
Therefore
n(Cd) / n(Fe) = [A (Cd) / (A Fe) ] * [ R (Fe) / R (Cd)]^3
n(Cd) / n(Fe)= (112 / 56 ) * (1/1.26)3
n(Cd) / n(Fe)=1
In conclusion, The ratio of n(Cd) = n(Fe) is 1, hence same
Read more about density
https://brainly.com/question/14010194
Compared to the nucleus ⁵⁶₂₆Fe, the density of the nucleus ¹¹²₄₈Cd is same.
How do we calculate the density of nucleus?Density of any nucleus will be calculated by using the below equation as:
ρ = m/V, where
m = mass of the atom
V = volume = 4/3πR³
For the given question calculation will be proceed as:
n(Cd) / n(Fe) = [m(Cd)/m(Fe)].[R(Fe)/R(Cd)]³
From the given formulas of iron and cadmuim we put values on the above equation then we get,
n(Cd) / n(Fe) = (112 / 56 ) × (1/1.26)3
n(Cd) / n(Fe) = 1
Hence the density of nucleus ¹¹²₄₈Cd is same as of nucleus ⁵⁶₂₆Fe nucleus.
To know more about nucleus density, visit the below link:
https://brainly.com/question/5722114
#SPJ4
The compound below is treated with chlorine in the presence of light. Draw the structure for the organic radical species produced by reaction of the compound with a chlorine atom. Assume reaction occurs at the weakest c-h bond.
Explanation:
A carbon radical is a reaction intermediate, which is produced during a free-radical reaction. These carbon radicals contain one unpaired electron on a carbon atom. Hence, these radicals are highly reactive in nature.
A free-radical reaction results in the production of a carbon radical as a reaction intermediate.
What is radical in chemistry?A radical in chemistry is indeed an atom, molecule, and ion that possesses one least one unpaired electron electron. The term "radical" is sometimes used to refer to a free radical. These unpaired electrons provide radicals, with a few exceptions, a high degree of chemical reactivity. Radicals frequently dimerize on their own. The majority of organic radicals have brief lives.
A free-radical reaction results in the production of a carbon radical as a reaction intermediate. One unpaired electron is present on the carbon atom in these radical forms of carbon. As a result, the nature of these radicals is very reactive.
Therefore, a free-radical reaction results in the production of a carbon radical as a reaction intermediate.
To know more about radical, here:
https://brainly.com/question/29643759
#SPJ6
Write some of the chemical and physical properties and uses of each natural resource shown in the photos below.
1. What happens when an environment reaches its carrying capacity?
A. The population will decrease B. The population will increase
C. The resources will be unlimited
D. Nothing will happen.
Answer: b. population will decrease
Explanation:
since earth only has a finite amount of resources, it could only support a set amount of people. once these sources can no longer be used, the population will decrease because resources can no longer support the population.
Which ion combines with ba2 to form a compound that is most soluble in water
Answer:
(2) OH- is the answer.
Explanation:
Hope this helps:)...if not then sorry for wasting your time and may God bless you:)
The ions that combine with Ba2 to form the compound most soluble in water is OH- ion.
What is barium?Barium is a chemical element with atomic number 58.
Barium reacts with the hydroxide ion to form barium hydroxide. It is also called baryta water.
The reaction is [tex]Ba^2^+ aq + 2OH^- \rightarrow Ba(OH)_2 (aq)[/tex]
Thus, the ions that combine with Ba2 to form the compound most soluble in water is OH- ion.
Learn more about barium
https://brainly.com/question/2782682
#SPJ4
How many potassium ions are needed to bond with a phosphate ion?.
Perform the following operation
and express the answer in
scientific notation.
9.2x10^7 ÷ 3.7x10^9
Answer:
coefficient green : 2.4865
exponent (yellow) : 16
Explanation:
What is the Electronegativity difference of C and S?
Answer:
S 2.6 [2.58] & C is 2.6 [2.55]
Explanation: