Calculate the molecular weight of Na2sio3

Part of the small intestine is the most important for nutrient absorption is the jejunum and what else occurs at this location what makes the small intestine unique is it contains villi which increase the surface area to aid absorption.

The small intestine is part of the digestive tract which consists of villi, circular muscles, longitudinal muscles, mucous lining, and epithelium. In the small intestine, a chemical digestion process occurs where enzymes break down complex organic matter molecules into simpler molecules which are then absorbed by the epithelial cells.

Jejunum is part of the small intestine which is red in color because it contains lots of blood vessels and is located between the duodenum and ileum. Jejunum is the most important part of the small intestine because it absorbs most of the nutrients from food and water so that it can be used by the body. In the jejunum there are folds or projections called villi. Villi function to expand the surface of the small intestine which helps the absorption process.

Learn more about digestive system at:

https://brainly.com/question/10457697

#SPJ4

This immense mountain range began to form between 40 and 50 million years ago, when two large landmasses, India and Eurasia, driven by plate movement, collided is referred to as Himalaya and is therefore denoted as option B.

This is referred to as an elevated portion of the Earth's crust, generally with steep sides that show significant exposed bedrock.

The pressure of the impinging plates from the immense mountain ranges when India and Eurasia collided and was relieved by thrusting skyward, formed what is known as the Himalaya mountains which is why option B was chosen as the correct choice.

Read more about Himalaya here https://brainly.com/question/536493

#SPJ1

The full question is:

This immense mountain range began to form between 40 and 50 million years ago, when two large landmasses, India and Eurasia, driven by plate movement, collided. Because both these continental landmasses have about the same density, one plate could not be subducted under the other. The pressure of the impinging plates could only be relieved by thrusting skyward, and forming the _______________ Mountains.

A) Eurasian

B) Himalaya

C) Rocky

D) Ural

I apologize, I made an error in my previous response. 8.92 x 1024 atoms of tin would actually weigh approximately 5.26 x 10^25 grams.

To calculate this, you can use the formula:

Weight (in grams) = Number of atoms x Atomic weight (in grams/mol)

The atomic weight of tin is 118.710 g/mol. So,

Weight (in grams) = 8.92 x 1024 atoms x 118.710 g/mol

Weight (in grams) = 1.05 x 10^26 g

Weight (in grams) ≈ 5.26 x 10^25 g

Keep in mind that this is an extremely large weight and not practically measurable as it's equivalent to 5.26 x 10^25 tons.

Acetylsalicylic acid (ASA) is commonly known as Aspirin. Its structure contains a benzene ring on the left side and two functional groups, carboxylic acid and ester group linked to it.

The molecular formula of acetylsalicylic acid is C₉H₈O₄ and the expanded formula is CH₃COOC₆H₄COOH.

The crude aspirin should be dissolved in a small amount of warm ethanol to aid in the recrystallization of acetylsalicylic acid. Water will then be added, and the solution will be gradually cooled and chilled. The ASA will recrystallize, leaving the solid impurities dissolved in the solution.

The ferric chloride test detects the presence of phenol. The formation of purple color indicates a positive test result.

Several common inert ingredients of aspirin are:

Learn more about recrystallization here

https://brainly.com/question/15703840

#SPJ4

Answer: it would be x=7.5 m/s because you put x= 60-0 over 8 and i think dvide

21 moles of O2 are needed to react with 12 moles of C2H6.

The balanced chemical equation for the combustion of ethane (C2H6) is:

2C2H6 + 7O2 -> 4CO2 + 6H2O.

From the balanced equation, we can see that for every 2 moles of C2H6 that react, 7 moles of O2 are needed.

Since you have 12 moles of C2H6, the number of moles of O2 needed for the reaction would be:

12 moles C2H6 / 2 moles C2H6/7 moles O2 = 12 moles C2H6 / 2/7 moles O2 = 12*7/2 = 42/2 = 21 moles O2.

Therefore, 21 moles of O2 are needed to react with 12 moles of C2H6.

To learn more problems on moles:

https://brainly.com/question/14357742

#SPJ4

The heat required to vaporize the ethanol is 54.47 kJ.

We know that the heat of vaporization would have to do with the heat that is required so as to be able to change the state of the object. It is the heat that is required so as to enable the phase to be changed from liquid to gas phase.

H = mL

H = heat required

L=Heat of vaporization

m = mass of the liquid

H = 65 g * 838 joules per gram

H = 54.47 kJ

The ethanol would be vaporized by 54.47 kJ. This is the heat that is required to vaporize ethanol from the calculation above.

Learn more about heat of vaporization:https://brainly.com/question/9967928

#SPJ1

The breakdown of glycogen by the liver to maintain stable blood glucose levels requires phosphorylase kinase enzymes.

The body gets its energy primarily from glycogen. The liver houses glycogen storage. Enzymes are certain proteins that convert glycogen to glucose when the organism need extra energy. In the body, they release the glucose.

You must avoid glycogen depletion. Due to extended periods of strenuous exercise, this occurs when the glycogen stores are depleted. you may not be eating enough carbohydrates. It will result in persistent fatigue, decreased strength, decreased endurance, and a general deterioration in athletic performance.

To know more about glycogen visit:

https://brainly.com/question/2396657

#SPJ4

To solve this we must be knowing each and every concept related to isotope. Therefore, the correct options are options A among all the given options.

Every atom has an equal amount of protons and electrons, however isotopes are a little slightly weird because they contain variable quantities of neutrons while having an equal number of protons and electrons. Isotopes, however, differ in atomic mass while sharing the very same atomic number or place in the periodic table.

It is a naturally occurring (one parts per trillion) isotope.

It is radioactive, It has a half- life of 5,700 years.

It is found in all living organisms hence used for Carbon dating.

Therefore, the correct options are options A among all the given options.

To know more about isotope, here:

https://brainly.com/question/13662697

#SPJ1

The decreasing order of viscosity of the given liquids is as glycerol, ethylene glycol, and ethanol.

Viscosity is the resistance of a fluid to change shape or flow when compared to other liquids. So the fluid with high viscosity will have low fluidity. The main reason for increased viscosity will be due to the molecular interactions . Viscosity can also be defined as the ease with which the molecules can move concerning one another. That means the more the interaction between molecules, the more viscosity.

In the case of the given liquids, all have OH groups, which could result in hydrogen bonding. So more the hydroxyl groups, the more the hydrogen bonding, the more interaction, and high the viscosity. Here glycerol has three OH groups, So it will have the highest viscosity. The ethylene glycol with two OH groups comes second and then ethanol.

So the decreasing order of viscosity will be, Glycerol, Ethylene glycol, and Ethanol.

For further information regarding Viscosity, Kindly refer

https://brainly.com/question/2193315

#SPJ4

The statement which describes the experiment best is,the scientist is investigating Charles's law, which shows that temperature and volume are directly proportional.

What is Charles's law?

It states that the volume of a given mass of gas is directly proportional to its absolute temperature when pressure is held constant. It states that the volume of a given mass of gas is directly proportional to its absolute temperature when pressure is held constant. In other words, if the temperature of a gas increases, its volume will also increase. This relationship was first described by French scientist Jacques Charles in 1787. He based his law on the results of experiments he conducted with varying amounts of gas. Charles's Law is one of the gas laws, which were used to formulate the ideal gas law. This law is especially useful for understanding how gases behave under various conditions, such as changes in temperature and pressure. It is also important to note that Charles's Law does not apply to liquids and solids as they are not gases.

To learn more about Charles's law

https://brainly.com/question/14842720

#SPJ1

The empirical formula of this oxide of magnesium is derived as  MgO.

In chemistry, empirical formula of a chemical compound is simplest whole number ratio of atoms present in compound. An example of this concept is that: empirical formula of sulfur monoxide, or SO, would be SO as the empirical formula of disulfuric dioxide, S₂O₂.

Given total mass of magnesium ribbon, crucible and cover of  21.35 grams

Given that magnesium combined with oxygen gives a mass of 21.82 grams.

As we know, mass of magnesium oxide = mass of Mg + mass of O

mass of O = 21.82 - 21.35

= 0.19

moles of O = 0.19/16

= 0.011 mol O

So, now the empirical formula of magnesium oxide is MgO.

To know more about empirical formula, refer

https://brainly.com/question/1439914

#SPJ1

Answer:

Molar mass is 325.33

Explanation:

Molar mass is 325.33

Answer:

Chemical Change

Explanation:

A log is added to a camp fire and is burned. This is an example of a chemical change.

Two moles of ammonia result in one mole of nitrogen and three moles of hydrogen. This process is endothermic.

To learn more about ammonia refer to:

https://brainly.com/question/14445062

#SPJ1

Equation 2, i.e. C+ 2H2= CH4, and equation 1 i.e.N2+3H2=2NH3 have to be reversed to obtain the overall equation. Thus, options A and B are correct.

According to chemical symbolization, the definition of a chemical equation is a reaction that results in the formation of products. The creation of the consequent reaction has been caused by the inclusion of several steps in the appropriate order.

chemical formulas

The picture that is attached has the given chemical formulae.

The graphic that is included provides the anticipated final response.

Methane and ammonia served as the reactant in the subsequent reaction, which produced carbon and hydrogen.

Methane has been on the product side of equation 2 and ammonia has been on the product side of equation 1.

Thus, equation 2, i.e. C+ 2H2= CH4, and equation 1 i.e.N2+3H2=2NH3 have to be reversed to obtain the overall equation. Thus, options A and B are correct.

Learn more about the chemical equations, here:

brainly.com/question/12982745

#SPJ4

Answer:

A and B,     A,  C

Explanation:

Answer:

Crystalline solids

Explanation:

hope this helps

Answer:

The purpose of this experiment was to see how motion takes place as well as Force The independent was the second item used I think that what happened at the thing I used I took a ball and threw it on the ground from height distance I recorded the time Same height

Answer:

Read below

Explanation:

Do a quick conversion: 1 mole CO2 = 44.0095 gram using the molecular weight calculator and the molar mass of CO2. Check the chart for more details.

The amount in moles of the excess reactant left is 0.5 mole.

Balanced equation- 2ZnS (s) + 3O₂(g) --> 2ZnO (s) + 2SO₂(g).

What is another name for zinc sulfide?

From the balanced equation,

2 moles of ZnS reacted with 3 moles of O₂

How to determine the excess reactant

From the balanced equation,

2 moles of ZnS reacted with 3 moles of O₂

Therefore,

4.2 moles of ZnS will react with =(4.2 × 3) / 2 = 6.3 moles of O₂

From the calculations made above, we can see that only 6.3 moles of O₂ out of 6.8 moles given, is required to react completely with 4.2 moles of ZnS.

Thus, ZnS is the limiting reactant and O₂ is the excess reactant.

How to determine the mole of the excess reactant remaining

The excess reactant is O₂. Thus the mole remaining after the reaction can be obtained as illustrated below:

Mole of O₂ given = 6.8 moles

Mole of O₂ that reacted = 6.3 moles

Mole of O₂ remaining =?

Mole of O₂ remaining = (Mole of O₂ given) - (Mole of O₂ that reacted)

Mole of O₂ remaining = 6.8 - 6.3

Mole of O₂ remaining = 0.5 mole

To learn more about reactant refer to:

https://brainly.com/question/25685654

#SPJ1

The transport of glucose into erythrocyte by facilitated diffusion. When the glucose concentrations are 5mM on the outside and 0.1 mM on the inside, the free-energy change for glucose uptake into the cell is about 10 kJ/mol.

Given that :

Concentration of the outside = 5 mM

Concentration of the inside = 0.1 mM

Gas constant , R = 8.315 J/mol

Temperature T = 298 K

Faraday constant = 96480 J/V

N = 6.022 × 10²³ /mol

ΔV = 0.06 V

The free energy change is given as :

ΔG = RT ln (C in / C out) + ZFΔV

By using all the values , we get"

ΔG =  10 kJ/mol

Thus, the free energy change is 10 kJ/mol.

To learn more about free energy here

https://brainly.com/question/19425282

#SPJ4

The way the copies of the gene in the wolves affects the number of types of proteins in each tooth cell is B) Wolf 1 has two types of protein for the tooth size feature. Wolf 2 has one type of protein for the tooth size feature.

The gene that determines tooth size in wolves is located on a specific chromosome, each individual has two copies of that chromosome, one inherited from each parent.

If the copies of the gene in Wolf 1 are different from each other, it means that the wolf is heterozygous for that gene, meaning it has two different versions of the gene, one inherited from each parent. This leads to the production of two different types of proteins in each tooth cell, and thus a variation of tooth size in Wolf 1.

If the copies of the gene in Wolf 2 are the same as each other, it means that the wolf is homozygous for that gene, meaning it has two identical copies of the gene inherited from the same parent.

Find out more on genes and proteins at https://brainly.com/question/3456729

#SPJ1

Cu(s), will spontaneously reduce Fe2+ and Ag+. Thus option A is the answer.

A redox (reduction-oxidation) reaction is a chemical reaction in which one species (the reducing agent) loses electrons, while another species (the oxidizing agent) gains electrons. The reducing agent is said to be reduced, while the oxidizing agent is said to be "oxidized." In this case, copper metal, Cu(s), is the reducing agent, and [tex]Fe2+[/tex] and [tex]Ag+[/tex] are the oxidizing agents.

In the redox reaction, copper metal will lose electrons and is oxidized to Cu2+. The Fe2+ and Ag+ ions will gain electrons and be reduced to Fe and Ag, respectively. This process is spontaneous because the final state of the reaction is more stable than the initial state.

The reaction can be written as:

[tex]Cu(s) + Fe^{2+} -- > Cu^{2+} + Fe(s)[/tex]

[tex]Cu(s) + Fe^{2+} -- > Cu^{2+} + Fe(s)[/tex]

In summary, copper metal is a stronger reducing agent than Fe2+ and Ag+ ions, which is why the reaction is spontaneous.

Learn more about Copper:

https://brainly.com/question/19761029

#SPJ4

There will be  7.58*10^-9 moles of copper atoms in 4.57*10^15 atoms of copper.

A substance's mole is equivalent to 6.022 x 1023 of that material (such as atoms, molecules, or ions). The term "Avogadro's number" or "Avogadro's constant" refers to the number 6.022 1023. To convert between mass and the number of particles, use the mole concept.

Avogadro's number, which is equal to 6.02214076 1023, is the number of units in one mole of any material (defined as its molecular weight in grams). Depending on the substance and the nature of the reaction, the units may be electrons, atoms, ions, or molecules.

To know more about moles visit:

https://brainly.com/question/26416088

#SPJ1

The Alpha cleavage of the alcohols is when a bond will cleave next to the heteroatoms to generates the resonance stabilization of the cation. This cleavage generally found in the alcohols.

The bond cleavage next to the heteroatoms like as oxygen, sulfur and the nitrogen will generates the cations that is resonance stabilize. The cleavage of bond in between the  carbon and the carbon that is next to atom generated the cation and it is resonance stabilized. This Alpha bond cleavage is generally found in the alcohols.

Thus, the alpha bond cleavage is breaking of the carbon - carbon bond that is adjacent to carbon attached to the functional group.

To learn more about bond cleavage here

https://brainly.com/question/16234946

#SPJ4

Sort the items in ascending size. Alcohol (primary>secondary>tertiary) > Amines (primary>secondary>tertiary) compounds with a lower boiling point are ALKANES in that order.

A compound in chemistry is a substance composed of two or more separate chemical elements mixed together in a certain proportion. When the elements are combined, they react with one another and create chemical connections that are challenging to dissolve. These bonds are formed as a result as atoms sharing or trading electrons.

Whenever a group of atoms unite to form a pure material, compounds are created. These can be reduced to their component atoms. The atoms of a reactants interact during chemical reactions to create new compounds. Reacting species are known as reactants, while the results of the reaction are known as products.

To know more about compound visit:
https://brainly.com/question/13516179

#SPJ4

The correct question is

List the following compounds in order of decreasing boiling point: Rank from largest to smallest. To rank items as equivalent, overlap them.

A sample of a compound made up exclusively of copper and sulphur weighing 100.0 g was discovered to contain 79.9 g of copper, 20.1 g of sulphur, and 20.01 g of M(s).

In chemistry, a compound is a substance made up of two or more different chemical elements that have been combined together in a specific ratio. When the elements interact with one another, difficult-to-break chemical bonds are formed. a substance produced chemically by combining two or more different elements. Examples of compounds are table salt (NaCl), which is generated from the elements sodium and chloride, and water (H2O), which is created from the components hydrogen and oxygen.

A compound is a chemical entity made up of numerous identical molecules bound together by chemical bonds and made up of atoms from different elements. A molecule is not regarded as a compound if it solely contains atoms from one element.

m = mcompound * W

m(Cu) = 100 g * 0.799 = 79.0* g

M(S) = 100 g * 0.201 = 20.01 g.

To know more about Compound visit:

https://brainly.com/question/13516179

#SPJ1

The electronic configuration of atomic number 3 will be, 1s²: 2s^1 with all the other slots filled in as 0.

The electron configuration is described as the distribution of electrons of an atom or molecule in atomic or molecular orbitals.

As we are given that the atomic number of an element is, 3. Now we have to determine the electronic configuration of an element that has the atomic number 3.

We know that the atomic number is equal to the number of protons or number of electrons.

So, the number of electrons the element has is equal to 3.

Therefore, the electronic configuration of atomic number 3 will be, 1s²: 2s^1 .

Learn more about electronic configuration at: https://brainly.com/question/26084288

#SPJ1

Complete question:

Complete the chart. (Remember to enter a 0 if necessary.) Atomic Number: 3 1s: 2s: 2p: 3s: 3p: 4s: 3d: 4p: 5s:

The protons and neutrons that make up the atom's nucleus account for the majority of the atom's mass according to the Bohr model.

The Bohr model, also known as the Rutherford-Bohr model, was first proposed by Niels Bohr and Ernest Rutherford in 1913. It is a system made up of an orbiting nucleus that is compact and dense, surrounded by electrons, much like the Solar System.

Bohr was the first to realise that electrons move in various orbits around the nucleus and that the quantity of electrons in an element's outer orbit determines its properties.

In the Bohr model of the atom, the protons and neutrons that make up the nucleus are responsible for most of the atom's mass. The negatively charged electrons orbit the positively charged core, making up a small portion of the mass but being electrically comparable to the protons in the nucleus.

Therefore, the correct answer is option a. in specific, allowed orbits.

To learn more about bohr model refer to;

https://brainly.com/question/4138548

#SPJ4

Unlike the leaf cells, the root cells have no chloroplasts because root cells do not need to produce or use energy. Option A

We have to note that the cell is the smallest part of an organism that can have independent existence. We know that the microscope is the device that we can be able to use to view the cells.

Now, we know that the cell is composed of the organelles of the cell. The organelles of the cell include the chloroplast of the cell as well as the cell wall of the cell.

Learn more about cell:https://brainly.com/question/30046049

#SPJ1

Missing parts;

The image below shows two types of plant cells under a microscope.

root cells and leaf cells

Which statement explains the difference in chloroplasts between the two types of plant cells?

A.

Unlike the leaf cells, the root cells have no chloroplasts because root cells do not need to produce or use energy.

B.

Unlike the root cells, the leaf cells have many chloroplasts because leaf cells produce sugars for the plant.

C.

The root cells have smaller chloroplasts because root cells do not need to store food and water.

D.

The leaf cells have larger chloroplasts because leaf cells need more support and a stronger structure.