calculate the hydrogen ion concentration of an aqueous solution, given the concentration of hydroxide ions is 1 x 10^-5 M and the ion constant for water is

The value of the equilibrium constant, Kc, is 0.375 [tex]M^{-2[/tex].

The balanced chemical equation for the reaction is:

X(g) + Y(g) ⇌ Z(g)

From the stoichiometry of the reaction, we can see that the number of moles of X and Y that react is equal to the number of moles of Z that are produced. In this case, since 6.00 mol of Z are produced, 6.00 mol of X and 6.00 mol of Y must react.

At equilibrium, let the concentrations of X, Y, and Z be [X], [Y], and [Z], respectively. Then, according to the stoichiometry of the reaction, we have:

[X] = 4.00 mol / 1.00 L = 4.00 M

[Y] = 4.00 mol / 1.00 L = 4.00 M

[Z] = 6.00 mol / 1.00 L = 6.00 M

The equilibrium constant expression for the reaction is:

Kc = [Z] / ([X] * [Y])

Substituting the concentrations we found above, we get:

Kc = (6.00 M) / ((4.00 M) * (4.00 M)) = 0.375 [tex]M^{-2[/tex]

For more question on equilibrium constant click on

https://brainly.com/question/3159758

#SPJ11

Mr. Watkins was likely given packed red blood cells (PRBCs) in addition to normal saline solution due to blood loss or anemia. The infusion of PRBCs addresses the problem of low red blood cell count (anemia), which cannot be addressed by saline solution alone.

A solution refers to a homogeneous mixture of two or more substances, in which the particles of one substance (the solute) are uniformly distributed throughout the particles of another substance (the solvent). The process of creating a solution is called dissolution or solvation.

Solutions can be classified based on the physical state of the solvent and the solute. For example, if both the solvent and the solute are in a liquid state, the solution is called a liquid solution. Similarly, if the solvent is a gas and the solute is a solid, the solution is called a solid-gas solution. Solutions have several important properties such as concentration, colligative properties, and osmotic pressure. The concentration of a solution refers to the amount of solute present in a given amount of solvent.

To learn more about Solution visit here:

brainly.com/question/7932885

#SPJ4

The aromatic region in the spectrum of biphenyl is different from the starting material. The starting material, which is likely a substituted benzene, would show a single peak in the aromatic region. Biphenyl, on the other hand, would show two peaks in the aromatic region.

The difference in the aromatic region can be attributed to the presence of two aromatic rings in biphenyl. Each ring has its own set of hydrogen atoms, which results in two separate peaks. The peak corresponding to the hydrogens on the ortho and para positions (H-2, H-3, H-5, H-6) will appear at a higher field (lower ppm) due to deshielding from the adjacent ring. The peak corresponding to the hydrogens on the meta positions (H-1, H-4) will appear at a lower field (higher ppm) due to shielding from the adjacent ring.

As for how many hydrogen atoms should be integrated for in the spectrum of biphenyl, there should be 10 hydrogen atoms integrated for, 4 on one ring and 6 on the other.

Learn more about spectrum here:

https://brainly.com/question/6836691

#SPJ11

If you lost 2.0 lbs of water during volleyball practice through sweating, and all of it evaporated, the amount of energy absorbed by the water from your body would be approximately 2053.652 kJ.

When water evaporates from the skin, it absorbs heat energy from the body, leading to cooling of the body. To calculate the amount of energy absorbed by the water, we can use the equation:

Q = mL

where Q is the heat absorbed or released, m is the mass of water evaporated, and L is the heat of vaporization of water, which is 40.7 kJ/mol.

First, we need to convert the mass of water lost from pounds to grams, as well as calculate the moles of water lost. 1 lb = 453.592 g, so 2.0 lbs is equivalent to 907.185 g. The molar mass of water is 18.015 g/mol, so 907.185 g is equivalent to 50.36 moles of water.

Next, we can use the equation:

n(H₂O) = n(H₂O) x L

where n(H₂O) is the number of moles of water lost and L is the heat of vaporization of water. Substituting the values, we get:

Q = (50.36 mol) x (40.7 kJ/mol) = 2053.652 kJ

Therefore, the water absorbed approximately 2053.652 kJ of heat energy from the body.

To know more about the energy absorbed refer here :

https://brainly.com/question/15075055#

#SPJ11

A film inside a box can be exposed by beta particles but not alpha particles due to their different penetration capabilities

Alpha particles are much larger and heavier than beta particles, which means that they cannot penetrate through materials as easily as beta particles.

When a film is kept in a box, the box acts as a shield that blocks alpha particles from reaching the film, as the particles cannot pass through the material of the box. However, beta particles are smaller and have less mass, which makes them more capable of passing through materials. Therefore, if there is a source of beta particles outside the box, they can penetrate through the material of the box and reach the film, potentially exposing it.

In summary, the ability of particles to penetrate through materials is dependent on their size and mass, with alpha particles being too large to penetrate through the box and beta particles being small enough to pass through it.

To know more about radioactive click on below link :

https://brainly.com/question/2288334#

#SPJ11

An amphipathic detergent is used in extraction solutions because it can solubilize both polar and nonpolar substances, such as proteins and lipids, which may not be soluble in aqueous or organic solvents alone.

The polar head of the detergent molecule is attracted to water and forms hydrogen bonds with the aqueous solvent, while the nonpolar tail is repelled by water and associates with the nonpolar substances, such as lipids. This allows the detergent to form micelles or vesicles around the hydrophobic molecules, effectively solubilizing them in the aqueous environment.

In addition to solubilizing hydrophobic molecules, the amphipathic detergent can also disrupt membrane structures, such as cell membranes or organelle membranes, by inserting its nonpolar tail into the membrane's hydrophobic core, causing the membrane to break apart or become permeable. This enables the extraction of membrane-bound proteins or lipids.

Overall, the use of an amphipathic detergent in an extraction solution enhances the solubilization and extraction of both polar and nonpolar substances, which would otherwise be difficult or impossible to extract using a single type of solvent.

To know more about amphipathic detergent refer here:

https://brainly.com/question/31393488#

#SPJ11

You will find that your muffins will rise more freely and take a better shape if you grease your muffin tins.

Greasing the tins helps prevent the muffin batter from sticking to the sides and bottom of the tin, allowing it to expand more easily as it bakes. You can use butter, oil, or a non-stick cooking spray to grease the muffin tins. Additionally, some recipes may call for lining the muffin tins with paper liners, which can also help prevent sticking and make it easier to remove the muffins from the tin once they are baked.

Learn more about muffins

https://brainly.com/question/30900925

#SPJ4

Glutathione peroxidase is a selenoprotein, meaning that it contains the rare amino acid selenocysteine in its active site instead of the more commonly found cysteine residue. The substitution of sulfur (present in cysteine) with selenium (present in selenocysteine) would produce some similar chemistry as well as some differences.

Both sulfur and selenium are in the same group (group 16) of the periodic table, so they have some similar chemical properties. Sulfur and selenium both have relatively similar atomic radii and electronegativities. As a result, selenocysteine can form disulfide bonds with cysteine residues, similar to cysteine.

Learn more about Glutathione peroxidase

https://brainly.com/question/31586173

#SPJ4

The solvent can affect the reaction rate through solvation effects and mass transfer effects, even if it is not participating actively in the rate-determining step.

The solvent is an important component of many chemical reactions, and its effects on the reaction can be significant. When the solvent is not participating actively in the rate-determining step, it can still have an impact on the reaction in various ways. Two possible effects of the solvent are:

Solvation Effects: The solvent can affect the stability and reactivity of the reactants and intermediates by solvating them. Solvation can increase or decrease the polarity of the solvent, which can affect the reaction rate. For example, polar solvents like water can stabilize charged intermediates and increase the rate of reactions involving charged species.

Mass Transfer Effects: The solvent can also affect the rate of reaction by controlling the mass transfer of reactants and products to and from the reaction site. The solvent's viscosity and diffusivity can determine the rate at which reactants can reach the reaction site and the rate at which products can be removed. For example, a high-viscosity solvent can slow down the reaction by limiting the diffusion of reactants.

For more such questions on solvation

https://brainly.com/question/30505979

#SPJ11

The chemical addition of hydrogen to an unsaturated fat to form the corresponding saturated fat would cause the fat to become more solid at room temperature.

Unsaturated fats have double bonds in their molecular structure, which causes the molecules to be further apart. Hydrogenation is the process of adding hydrogen to these double bonds, converting them into single bonds. As the double bonds are converted to single bonds, the fat becomes saturated, meaning it has no more double bonds. The saturated fat molecules are now more tightly packed together, which causes the fat to have a higher melting point. As a result, the fat becomes more solid at room temperature.

To know more about Unsaturated Fats:

https://brainly.com/question/17543553

#SPJ11

The measure of how cool skin can become through the process of evaporating water into the air is called the skin's evaporative potential.

This is the lowest temperature that can be reached by evaporating water from the skin's surface, which is affected by factors such as humidity, air temperature, and wind speed. When sweat evaporates from the skin's surface, it removes heat from the body, cooling the skin and reducing the risk of overheating. This is why it's important to stay hydrated and seek shade or air conditioning during hot weather to avoid dehydration and heat exhaustion.

The measure of how cool skin can become by evaporating water into the air is also called Wet Bulb Globe Temperature (WBGT). It helps determine safe levels of heat exposure and physical activity, as our body's cooling mechanism relies on sweating and evaporation. Lower WBGT values indicate better evaporative cooling potential, allowing skin temperature to decrease more effectively. In contrast, higher WBGT values suggest limited cooling, increasing the risk of heat-related illnesses.

To know more about Wet Bulb Globe Temperature visit-

brainly.com/question/29488599

#SPJ11

Answer: I need a pic

Explanation:

photo?

The chemical substance found by Dr. Joachim that caused harm to the fetus would be classified as a teratogen.

Teratogens are substances that can disrupt normal fetal development and cause birth defects or other adverse effects when exposed to a developing fetus during pregnancy.

Examples of teratogens include certain medications, environmental pollutants, alcohol, tobacco, and illicit drugs. It is important to note that specific details about the chemical substance would be required to provide a more precise classification or identification.

Therefore, Based on the information provided, the chemical substance that Dr. Joachim found to cause harm to the fetus would likely be classified as a teratogen.

Learn more about teratogen:

https://brainly.com/question/24190679

#SPJ11

Julia has a strong proficiency in chemistry experiments.

Julia's abilities in lab experiments in her chemistry class demonstrate that she is highly skilled in all aspects of the process, from reading and comprehending the experiment to cleaning up afterwards. Her efficiency and accuracy in conducting experiments are indicators of her proficiency in chemistry.

Additionally, her ability to take detailed notes and make observations further demonstrates her expertise in this field. Overall, her exceptional performance in all aspects of lab work suggests that she has a strong proficiency in chemistry experiments.

Based on her performance in lab experiments in her chemistry class, it is evident that Julia has a strong proficiency in this field. Her ability to quickly and accurately read and comprehend experiments, as well as set up equipment and conduct experiments with precision, are clear indications of her expertise.

Moreover, her ability to take detailed notes and make accurate observations during experiments further attests to her proficiency in chemistry. It is also noteworthy that Julia is fast in cleaning up the equipment after an experiment, which indicates that she has a good understanding of safety protocols and a meticulous approach to lab work.

Overall, Julia's strong proficiency in chemistry experiments is apparent from her exceptional performance in all aspects of the lab work.

Learn more about protocols here:

https://brainly.com/question/11763983

#SPJ11

Answer:

NIO

Explanation:

This can result in poor conditions for animal respiration and a decrease in primary productivity, followed by a decrease in phytoplankton biomass.

Excessive nutrient discharges, such as nitrogen and phosphorus, can lead to an overgrowth of phytoplankton in the water. This can lead to an immediate increase in primary productivity, but if the concentrations of nutrients become too high, it can actually be lethally toxic to all phytoplankton. As the phytoplankton die and decompose, the bacteria responsible for decomposition consume oxygen, leading to the removal of some or all oxygen from the water. This can create a dead zone where no aquatic life can survive. However, if the nutrient levels are kept at an appropriate level, phytoplankton can thrive and provide improved conditions for animal respiration, leading to a healthy and productive aquatic ecosystem. Excessive nutrient discharges can lead to increased phytoplankton growth. When these phytoplankton eventually die and decompose, oxygen in the water is consumed, potentially leading to the removal of some or all oxygen.

To know more about phytoplankton please refer: https://brainly.com/question/27207827

#SPJ11

The alcohol that could be prepared by the greatest number of different combinations of Grignard reagents and carbonyl compounds is the primary alcohol. This is because primary alcohols can be prepared by the reaction of Grignard reagents with aldehydes, ketones, and esters. Secondary alcohols can also be prepared by the reaction of Grignard reagents with ketones, but they cannot be prepared from aldehydes or esters. Tertiary alcohols, on the other hand, cannot be prepared by the reaction of Grignard reagents with carbonyl compounds at all. Therefore, the primary alcohol has the greatest number of possible combinations of Grignard reagents and carbonyl compounds for its synthesis.
The alcohol that can be prepared by the greatest number of different combinations of Grignard reagents and carbonyl compounds is a secondary alcohol. This is because secondary alcohols can be synthesized from both aldehydes and ketones through the reaction with Grignard reagents, providing a wide range of possibilities for varying the reactants.Grignard reagent is an organometallic compound that is commonly used in organic chemistry as a nucleophile. It is named after its discoverer, French chemist Victor Grignard.

Grignard reagents are formed by the reaction of an alkyl halide or an aryl halide with magnesium metal in the presence of anhydrous ether. The resulting compound is a highly reactive species that can react with a wide range of electrophiles, such as carbonyl compounds, to form a new carbon-carbon bond.

To know more about Grignard reagents visit:

https://brainly.com/question/30144052

#SPJ11

To obtain 126 L of a 60% acid solution, the chemist needs to mix 36 L of a 10% acid solution and 90 L of an 80% acid solution.

To determine how many liters of a 10% acid solution and an 80% acid solution must be mixed together to obtain 126 L of a 60% acid solution, you can use the following steps:

1. Let x represent the liters of the 10% acid solution and y represent the liters of the 80% acid solution.
2. You know that the total volume of the mixture is 126 L, so you can write the equation: x + y = 126.
3. You also know that the mixture needs to be a 60% acid solution, so you can write the equation: 0.1x + 0.8y = 0.6 * 126, which simplifies to 0.1x + 0.8y = 75.6.
4. Now you have a system of linear equations:

  x + y = 126
  0.1x + 0.8y = 75.6

5. Solve for one variable, for example, x = 126 - y.
6. Substitute the expression for x in the second equation: 0.1(126 - y) + 0.8y = 75.6.
7. Simplify the equation: 12.6 - 0.1y + 0.8y = 75.6.
8. Combine the y terms: 0.7y = 63.
9. Solve for y: y = 63 / 0.7 = 90.
10. Substitute the value of y back into the equation for x: x = 126 - 90 = 36.

So, to obtain 126 L of a 60% acid solution, the chemist needs to mix 36 L of a 10% acid solution and 90 L of an 80% acid solution.

Answer: A

Explanation:

Edge

If phenol red solution is added to the grape juice, it can act as an indicator to show whether the fermentation is taking place. Phenol red is a pH indicator that turns yellow in an acidic environment (pH below 6.8) and red in a basic environment (pH above 8.2).

The bubbles in a flask that contains fermenting yeast in grape juice are likely carbon dioxide gas bubbles produced during the fermentation process. The fermentation process involves the conversion of sugar into alcohol and carbon dioxide by yeast. As yeast consumes the sugar in grape juice, it produces carbon dioxide as a byproduct, which escapes as bubbles.

Initially, the grape juice would be acidic, with a pH below 6.8, and the phenol red solution would appear yellow. However, as the yeast consumes the sugar in the grape juice and produces carbon dioxide, the pH of the solution increases and becomes more basic. As a result, the phenol red solution changes color from yellow to red, indicating the increase in pH.

The bubbles in the flask are evidence of the carbon dioxide gas produced by the yeast, which indicates that fermentation is taking place. The increase in pH observed in the phenol red solution is a direct result of the production of carbon dioxide, which is a weak acid.

The carbon dioxide dissolves in the grape juice and reacts with water to form carbonic acid, which then dissociates into bicarbonate ions and hydrogen ions. This process increases the pH of the solution and causes the phenol red indicator to change from yellow to red.

For more question on phenol red solution click on

https://brainly.com/question/6820241

#SPJ11

The concentration of the [tex]HNO_3[/tex] solution is 0.0828 M.

The balanced chemical equation for the reaction between [tex]HNO_3[/tex] and [tex]Ba(OH)_2[/tex] is:

[tex]HNO_3 + Ba(OH)_2 = Ba(NO_3)_2 + 2H_2O[/tex]

From the equation, we can see that one mole of [tex]HNO_3[/tex] reacts with one mole of [tex]Ba(OH)_2[/tex]. Therefore, the moles of [tex]HNO_3[/tex] in the unknown solution can be calculated from the amount of [tex]Ba(OH)_2[/tex] used in the titration as follows:

moles of [tex]Ba(OH)_2[/tex] = concentration x volume

moles of [tex]Ba(OH)_2[/tex] = 0.250 mol/L x 0.0331 L

moles of [tex]Ba(OH)_2[/tex] = 0.00828 mol

Since one mole of [tex]HNO_3[/tex] reacts with one mole of [tex]Ba(OH)_2[/tex], the moles of [tex]HNO_3[/tex] in the unknown solution are also 0.00828 mol. We can then calculate the concentration of the [tex]HNO_3[/tex] solution as follows:

concentration of [tex]HNO_3[/tex] = moles of [tex]HNO_3[/tex] / volume of [tex]HNO_3[/tex] solution

concentration of [tex]HNO_3[/tex]  = 0.00828 mol / 0.100 L

concentration of [tex]HNO_3[/tex] = 0.0828 mol/L or 0.0828 M

For more question on concentration click on

https://brainly.com/question/26255204

#SPJ11

As a pollutant such as methylmercury works its way through the food chain, Biomagnification occurs, resulting in top-level food chain members ingesting even higher concentrations of the pollutant.

Biomagnification is the process by which pollutants such as methylmercury become increasingly concentrated as they move up the food chain. This occurs because organisms at lower levels of the food chain ingest small amounts of the pollutant, which then accumulates in their bodies. As larger organisms consume these smaller organisms, they take in a higher concentration of the pollutant. This process continues as the pollutant moves up the food chain, resulting in top-level predators ingesting even higher concentrations of the pollutant. Biomagnification can have serious consequences for the health of these top-level predators, as well as for human populations that consume them.

learn more about Biomagnification

https://brainly.com/question/7631542

#SPJ11

When water is warmed from its freezing temperature to its temperature of maximum density, it a. contracts.

When water is warmed from its freezing temperature (0°C) to its temperature of maximum density (around 4°C), it undergoes a process of  contraction.  As  the water warms up from 0°C, the hydrogen bonds between water molecules are rearranged, allowing the molecules to come closer together. This results in a decrease in the overall volume, causing the water to contract.

During this process, the water maintains its mass, so its weight remains constant. It does not increase in weight, as this would require an addition of mass. Likewise, it does not expand or maintain a constant volume during this temperature change. Expansion typically occurs when water is heated beyond 4°C, as the kinetic energy of the water molecules increases and they move further apart, causing an increase in volume.

In summary, when water is warmed from its freezing temperature to its temperature of maximum density, it contracts. This is due to the rearrangement of hydrogen bonds between water molecules, allowing them to come closer together and decrease in volume. Therefore the correct option A

The Question was Incomplete, Find the full content below :

When water is warmed from its freezing temperature to its temperature of maximum density, it...

a. contracts.

b. maintains a constant volume.

c. increases in weight.

d. expands.

Know more about contracts here:

https://brainly.com/question/984979

#SPJ11

The concentration of the pollutant in the 3.0 kg sample of pond water is determined to be 1.2 ppm by converting the mass and calculating the ratio.

To find the concentration of the pollutant in the 3.0 kg sample of pond water in parts per million (ppm), you can follow these steps:

1. Convert the mass of the sample to milligrams (mg), as the mass of the pollutant is given in mg. There are 1,000,000 mg in 1 kg, so:
3.0 kg * 1,000,000 mg/kg = 3,000,000 mg

2. Determine the ratio of the mass of the pollutant to the mass of the sample:
3.6 mg pollutant / 3,000,000 mg sample

3. Calculate the concentration in parts per million (ppm) by multiplying the ratio by 1,000,000:
(3.6 mg pollutant / 3,000,000 mg sample) * 1,000,000 = 1.2 ppm

So, by calculating we can say that the concentration of the pollutant in the 3.0 kg sample of pond water is 1.2 ppm.

To know more about the pollutant refer here :

https://brainly.com/question/29594757#

#SPJ11

The strongest buffer solution for an aqueous solution of acetic acid made of acetic acid and acetate (pKa = 4.76) would be one where the concentrations of both acetic acid and acetate are equal.

This is known as the "half-equivalence point" or "maximum buffer capacity" point, where the buffer solution can resist changes in pH the most effectively. The pH at this point would be equal to the pKa of acetic acid, which is 4.76. So, a solution made of equal amounts of acetic acid and acetate ions would be the strongest buffer solution for an aqueous solution of acetic acid.

More on buffer solution: https://brainly.com/question/29979316

#SPJ11

Autoionization in methanol (CH3OH) can occur between two methanol molecules, where a proton (H+) is transferred from one molecule to the other, forming a hydronium ion (H3O+) and a methoxide ion (CH3O-).

The autoionization reaction for methanol can be written as:

2CH3OH ⇌ CH3O- + H3O+

This reaction is also known as a proton transfer reaction, and it results in the formation of both an acid (H3O+) and a base (CH3O-) in the solvent system.

To know more about solvent please visit:

https://brainly.com/question/30452436

#SPJ11

The principal quantum number of the electron with a radius of 0.4761 nm is 4.
To find the principal quantum number (n) of an electron with a radius of 0.4761 nm, we can use the formula for the radius of an electron in a hydrogen atom:

r = n² * a₀

where r is the radius, n is the principal quantum number, and a₀ is the Bohr radius (approximately 0.0529 nm).

To solve for n, we can rearrange the formula:

n = sqrt(r / a₀)

Now, plug in the given values:

n = sqrt(0.4761 nm / 0.0529 nm)

n ≈ 3.2

Since the principal quantum number must be an integer, we can round up to the nearest whole number:

n ≈ 4

The principal quantum number of an electron with a radius of 0.4761 nm is approximately 4.

to know more about quantum here

brainly.com/question/32116992

#SPJ11

If a person cannot properly ventilate, the partial pressures of oxygen (pO2) and carbon dioxide (pCO2) in the blood can change.

Normally, ventilation (breathing) helps to maintain a balance of pO2 and pCO2 in the blood.

During inhalation, oxygen enters the lungs and diffuses across the alveolar membrane into the blood, where it binds to hemoglobin in red blood cells. During exhalation, carbon dioxide is removed from the blood and exhaled out of the body.

If a person cannot properly ventilate, such as in cases of respiratory failure, lung disease, or airway obstruction, the exchange of gases between the lungs and the blood may be impaired. This can cause a decrease in the pO2 and an increase in the pCO2 in the blood.

Low pO2 levels in the blood can lead to hypoxemia, which can cause symptoms such as shortness of breath, confusion, and fatigue.

High pCO2 levels in the blood can cause respiratory acidosis, which can cause symptoms such as headaches, dizziness, and confusion.

In severe cases, improper ventilation can be life-threatening and may require medical intervention such as oxygen therapy, mechanical ventilation, or other respiratory support.

to know more about ventilation refer here:

https://brainly.com/question/31440202#

#SPJ11

The instability of the fulminate ion is due to its highly polarized nature, which makes it prone to explosive reactions.

A resonance structure is a collection of two or more Lewis Structures that describe the electronic bonding of a single polyatomic species, including fractional bonds and fractional charges.

The cyanate ion (NCO⁻) and the fulminate ion (CNO⁻) have the same three atoms - nitrogen (N), carbon (C), and oxygen (O) - but different arrangements of those atoms, which result in vastly different chemical and physical properties.

The cyanate ion is a stable ion that can form salts and is commonly found in inorganic and organic compounds. Its resonance structures are:

      O=C-N⁻ <-> O⁻-C=N

In the first structure, the double bond is between carbon and oxygen, while in the second structure, the double bond is between nitrogen and carbon. The resonance hybrid of the cyanate ion results from the combination of these two structures, which indicates the presence of partial double bond character in both the C-O and C-N bonds.

On the other hand, the fulminate ion is an unstable ion that can form highly explosive compounds. Its resonance structures are:

     C=N-O⁻ <-> C⁺=N-O⁻

In the first structure, the double bond is between nitrogen and oxygen, while in the second structure, the double bond is between carbon and nitrogen. The resonance hybrid of the fulminate ion results from the combination of these two structures, which indicates the presence of partial double bond character in both the N-O and C-N bonds. The instability of the fulminate ion is due to its highly polarized nature, which makes it prone to explosive reactions.

Learn more about resonance structure on:

https://brainly.com/question/30725755

#SPJ4

The complete question is:

The cyanate ion (OCN- ) and the fulminate ion (CNO- ) share the same three atoms but have vastly different properties. The cyanate ion is stable, while the fulminate ion is unstable and forms explosive compounds. The resonance structures of the cyanate ion are explored in Example 9.8. Draw Lewis structures for the fulminate ion—including possible resonance forms— and use formal charge to explain why the fulminate ion is less stable (and therefore more reactive) than the cyanate ion.