Answer:
C
Explanation:
Reflection.
A 330-ohm resistor is connected to a 5-volt battery. The current through the resistor is
Question :-
A 330 Ohm Resistor is connected to a 5 Volt Battery . What is the Current through the Resistor ?Answer :-
Current of the Battery is 66 Ampere.Explanation :-
As per the provided information in the given question, The Resistance is given as 330 Ohm . The Voltage is given as 5 Volt . And, we have been asked to calculate the Current .
For calculating the Current , we will use the Formula :-
[tex] \bigstar \: \: \: \boxed{ \sf{ \: Current \: = \: \dfrac{Voltage}{Resistance} \: }} [/tex]
Therefore , by Substituting the given values in the above Formula :-
[tex] \dag \: \: \: \sf {Current \: = \: \dfrac {Voltage}{Resistance} } [/tex]
[tex] \longmapsto \: \: \: \sf {Current \: = \: \dfrac {5}{330} } [/tex]
[tex] \longmapsto \: \: \: \sf {Current \: = \: \dfrac {1}{66} } [/tex]
[tex] \longmapsto \: \: \: \textbf {\textsf {Current \: = \: 66 }} [/tex]
Hence :-
Current = 66 Ampere .[tex] \underline {\rule {180pt} {4pt}} [/tex]
Additional Information :-
[tex] \Longrightarrow \: \: \: \sf {Voltage \: = \: Current \: \times \: Resistance} [/tex]
[tex] \Longrightarrow \: \: \: \sf {Current \: = \: \dfrac {Voltage}{Resistance} } [/tex]
[tex] \Longrightarrow \: \: \: \sf {Resistance \: = \: \dfrac {Voltage}{Current} } [/tex]
Two identical charges are located 1 m apart and feel a 1 N repulsive electric force. What is the charge of each particle.
The charge on each particles which are 1 m apart and feeling a repulsive force of 1 N is 1.05×10¯⁵ C
AssumptionLet the charge on each particles be q
How to determine the charge Final force (F) = 1 NDistance apart (r) = 1 mElectrical constant (K) = 9×10⁹ Nm²/C²Charge on 1st particle (q₁) = q =? Charge on 2nd particle (q₂) = q =?The charge on each particle can be obtained by using the Coulomb's law equation as shown below:
F = Kq₁q₂ / r²
F = Kq² / r²
1 = (9×10⁹ × q²) / 1²
1 = 9×10⁹ × q²
Divide both side by 9×10⁹
q² = 1 / 9×10⁹
Take the square root of both side
q = √(1 / 9×10⁹)
q = 1.05×10¯⁵ C
Learn more about Coulomb's law:
https://brainly.com/question/506926
. Radiation travels at the speed of light
T or F?
Answer:
electromagnetic radiation moves at the speed of light
Water of mass 3 kg at a temperature of 80 ℃ is added to 5 Kg of water at 5 ℃. Calculate the final temperature of the mixture
The final temperature of the mixture is 33.123 °C.
What is temperature?Temperature can be defined as the hotness or coldness of a thing or place.
To calculate the final temperature of the mixture, we use the formula below.
Formula:
Heat gained by the cold water = heat lost by the hot watercm(t₃-t₁) = cm'(t₂-t₃)m((t₃-t₁) = m'(t₂-t₃)......... Equation 1Where:
m = mass of the cold waterm' = mass of the hot watert₁ = Temperature of the cold watert₂ = Temperature of the hot watert₃ = Temperature of the mixture.make t₃ the subject of the equation
t₃ = (mt₁+m't₂)/(m+m')............. Equation 2From the question,
Given:
m = 5 kgm' = 3kgt₁ = 5 °Ct₂ = 80 °CSubstitute these values into equation 2
t₃ = [(5×5)+(3×80)]/(3+5)t₃ = (25+240)/8t₃ = 33.123 °CHence, The final temperature of the mixture is 33.123 °C.
Learn more about temperature here: https://brainly.com/question/24746268
What type of heat transfer occurs in your stomach when you eat hot soup and an ice cold beverage
The type of heat transfer occurs in your stomach when you eat hot soup and an ice cold beverage is Conduction.
What is Conduction?This is the process by which heat energy is transmitted through collisions between neighboring atoms or molecules.
This happens when they are in close contact with each other which was why Conduction was chosen as the most appropriate choice.
Read more about Conduction here https://brainly.com/question/893656
478 J of work must be done to compress a gas to half its initial volume at constant temperature. How much work must be done to compress the gas by a factor of 12.0, starting from its initial volume?
I was thinking of using PV = W formula. Like
478 = P(V/2)
956 = PV
W = P(V/12)
12W/V = P
956 = (12W/V)(V)
956 = 12W
W = 79.66667 J
is this correct? could someone please help?
Answer:
Explanation:
I don't think so. Think about it. To compress the volume by a factor of 2 it takes 956 Joules.
Now you come along and you want to get the pressure for 1/12 of the volume. It's going to take a huge pressure to do that.
I would suggest that you have to use a modified form of the formula.
PV = 956
You need to compress the volume by 1/6
P(V/6) = 956
6 * PV/6 = 6 * 956
PV = 5736 J
Why did I only take 1/6? Because. 956 represents the pressure needed for 1/2 the volume. You need to multiply 1/2 * 1/6 to get 1/12
Q. 1 MWH is equal to ------- joules
a.3.6*10^10
b.3.6*10^6
c.3.6*10^9
d.3.6
1. (30 pts) Let x(t) = cos(πt/2) be a continuous-time signal,
a. Sketch the signal for -4
b. Find the fundamental period of the signal (if it is periodic).
c. Determine if the signal is odd / even or neither.
d. Compute the energy of the signal for all time.
e. Compute the power of the signal for all time.
Given that the function of the wave is f(x) = cos(π•t/2), we have;
a. The graph of the function is attached
b. 4 units of time
c. Even
d. 4.935 J/kg
e. 1.234 W/kg
How can the factors of the wave be found?a. Please find attached the graph of the signal created with GeoGebra
b. The period of the signal, T = 2•π/(π/2) = 4
c. The signal is even, given that it is symmetrical about the y-axis
d. The energy of the signal is given by the formula;
[tex] \frac{1}{2} \cdot \mu^{2} \cdot \omega ^{2} \cdot \: {a}^{2} \times \lambda[/tex]
Which gives;
E = 0.5 × 1.571² × 1² × 4 = 4.935 J/kg
e. The power of the wave is given by the formula;
E = 0.5 × 1.571² × 1² × 4 × 0.25 = 1.234 W/kg
Learn more about waves here:
https://brainly.com/question/14015797
What is the angular momentum at a radius of 2 m with an object of 5 kg at a
velocity of 20 m/s?
The angular momentum is 200 kg m^2 s^-1
what is angular momentum?Angular momentum is the product of linear momentum and the perpendicular distance. Linear momentum is the product of mass and velocity, where radius is the perpendicular distance
Angular momentum = mass * velocity * radius
Angular momentum = 5 * 2 * 20
Angular momentum = 200 kg m^2 s^-1
read more about angular momentum here: https://brainly.com/question/4126751
Please answer and show formula
Voltage = 5 volts
[tex]\sf \dfrac{number \ of \ turns \ in \ primary \ coil}{voltage\ in \ primary \ coil} = \dfrac{number \ of \ turns \ in \ secondary\ coil}{voltage\ in \ secondary\ coil}[/tex]
[tex]\hookrightarrow \sf \dfrac{400}{100} = \dfrac{20}{V_2}[/tex]
[tex]\hookrightarrow \sf 400V_2}{} = 20*100[/tex]
[tex]\hookrightarrow \sf V_2 = 5 V[/tex]
If a transverse wave osculates 7 times every second and the speed of the wave is 27 m/s what is the wavelength of the wave
Explanation:
formula is ˠ=vf
f=1/T
1/7
f=0.14
wavelength=27Ⅹ0.14
=3.78m
OR
7Ⅹ27
=189m
A bar of soap when weighed in air has a weight of 5,2N . When completely immersed in water , however it has a weight of 3,7N . What is the volume of the bar of soap
Answer:
A bar of soap when weighed in air has a weight of 5,2N . When completely immersed in water , however it has a weight of 3,7N . What is the volume of the bar of soap
state the precautions that is taken when charging a metal objectexplain why a rubber balloon rubbed will often stick to the wall when it has been rubbed
The balloon will attach to the wall because the balloon's negative charges will drive the electrons in the wall to shift to the other side of their atoms, leaving the wall's surface positively charged.
how many types air
I need a formula of calculating the s i unti of force
The si unit of force is newton.
so, F is eqal to m*g
Answer:
F=ma
Explanation:
force is actually a derived quantity
newton is a unit derived from kg.m/s^2
This is from Newton's second law of motion
F=ma
How can you describe the relationship between height and pressure?
Answer:
p = rho× g × h
Explanation:
p: pressure
rho : density
g : gravity acceleration
h : height
PLEASE HELP!!!!!!! MT TIME FOR MY TEST IS ALMOST OVER!!!
An ideal spring, with a pointer attached to its end, hangs next to a scale. With a 100-N weight attached, the pointer indicates "40" on the scale as shown. Using a 200-N weight instead results in "60" on the scale. Using an unknown weight X instead results in "30" on the scale. The weight of X is:
Answer:
50 N
Explanation:
Let the natural length of the spring = L
so
100 = k(40 - L) (1)
200 = k(60 - L) (2)
(2)/(1): 2 = (60 - L)/(40 - L)
60 - L = 2(40 - L)
60 - L = 80 - 2L
2L - L = 80 - 60
L = 20
Sub it into (1):
100 = k(40 - 20) = 20k
k = 100/20 = 5 N/in
Now
X = k(30 - L) = 5(30 - 20) = 50 N
Who came up with the 3 Laws of Motion?
Answer:
Isaac Newton came up with the 3 Laws of Motion
Answer:
Isaac Newton came up with three laws of motion
Can someone please help me with this assignment, this is due today
Answer:
did you get it done if not lmk I will help you out tomorrow when I get up
3
3
If a jogger runs a 10 kilometer race in 60 minutes, what is
her average speed?
A
10 km/hr
B
5 km/hr
С 6 km/hr
D
1.66 km/hr
If a jogger runs a 10 kilometer race in 60 minutes, her average speed is 10km/hr. Details about average speed can be found below.
How to calculate average speed?Average speed can be calculated by dividing the distance moved by a body by the time taken. That is;
Average speed = Distance/Time
According to this question, a jogger runs a 10 kilometer race in 60 minutes. The average speed is calculated as follows:
Average speed = 10km/1hr
Average speed = 10km/hr.
Therefore, if a jogger runs a 10 kilometer race in 60 minutes, her average speed is 10km/hr.
Learn more about average speed at: https://brainly.com/question/12322912
Consider a parallel-plate capacitor with plates of area A and with separation d.
Part A
Find F(V), the magnitude of the force each plate experiences due to the other plate as a function of V, the potential drop across the capacitor.
Express your answer in terms of given quantities and ϵ0.
View Available Hint(s)for Part A
F(V)
The magnitude of the force each plate experiences due to the other plate as a function of V, the potential drop across the capacitor is determined as [tex]\frac{V^2 A \varepsilon _o }{2d^2}[/tex].
Magnitude of the force
The magnitude of the force each plate experiences due to the other plate is determined as follows;
F = U/d
where;
U is potential energy stored in the capacitor[tex]F = \frac{1}{2} \frac{Q^2}{C} \times \frac{1}{d} \\\\[/tex]
Q = CV
[tex]F = \frac{1}{2} \frac{C^2V^2}{C d} = \frac{CV^2}{2d}[/tex]
where;
C is the capacitanceThe capacitance is given as;
[tex]C = \frac{\varepsilon _o A }{d}[/tex]
[tex]F = \frac{\varepsilon _o A }{d} \times \frac{V^2}{2d} \\\\F = \frac{V^2 A \varepsilon _o }{2d^2}[/tex]
Thus, the magnitude of the force each plate experiences due to the other plate as a function of V, the potential drop across the capacitor is determined as [tex]\frac{V^2 A \varepsilon _o }{2d^2}[/tex].
Learn more about capacitance of parallel plate capacitors here: https://brainly.com/question/13578522
Which statement best describes the circular flow model?
A television set is plugged into a 120 V outlet. The television circuit carries a current equal to 0.75 A. What is the overall resistance of the television set?
Answer:
R = 160 Ω
Explanation:
A television set is plugged into a 120 V outlet. The television circuit carries a current equal to 0.75 A. What is the overall resistance of the television set?
V = IR
120 volt = 0.75A * R
R = 160 Ω
When a penny is dropped, it takes 16 seconds. What is its height
Draw free body diagrams for the following objects: (12pts)
1A) A coaster sitting under a cup of coffee.
1B) A car slowing down as it approaches a stop sign.
1C) Your test stuck to your fridge by a magnet.
1D) A baseball just before it leaves the bat.
(a) The force diagram of a coaster sitting under a cup of coffee includes the weight of the coater plus the weight of coffee acting downwards.
(b) The force diagram of a car slowing down as it approaches a stop sign includes force of the car and frictional force opposing the motion.
(c) The force diagram includes the force of the test and action of the fridge which are eqaul and opposite.
(d) The force diagram of baseball before it leaves the bat incudes only the weight of the baseball acting downwards.
Force diagram of coaster sitting under a cup of coffeeThe force diagram of a coaster sitting under a cup of coffee includes the weight of the coater plus the weight of coffee acting downwards.
↑ Fn
Ф Fn = W
↓ W
Where;
W is weight of the coaster plus weight of coffeFn is the normal reactionForce diagram of a car slowing down as it approaches a stop signThe force diagram inlcudes the applied force and frictional force opposing the motion.
Ff ← Ф → F
where;
Ff is the kinetic frictional forceF is force of the carForce diagram of test stuck to your fridgeThe force diagram includes the force of the test and action of the fridge which are eqaul and opposite.
Fb ← Ф → Fa
where;
Fa is the force of the testFb is the force of the fridgeForce diagram of baseball before it leaves the batThe force diagram includes only the weight of the baseball acting downwards.
Ф
↓
W = mg
Learn more about force diagrams here: https://brainly.com/question/3624253
2. All of the following are examples of physical properties except:
A. tearing B. density C. melting point D. boiling point
All of the following are examples of physical properties except tearing.
What is Physical property?
This is used to describe the state of a physical system and is usually measurable.
Examples include:
DensityMelting point Boiling pointTearing isn't an example of a physical property which was why option A was chosen as the most appropriate choice.
Read more about Physical property here https://brainly.com/question/17436856
When you apply increasing thermal energy to a certain material, it reaches a temperature of 50 degrees C. However, when it reaches this temperature, applying more increasing thermal energy does not cause the temperature to rise. Which of the following best explains what is happening?
1. The system is having its heat leaking out that is not going into the material
2. The material is at its phase change temperature and the thermal energy is going to change the phase instead of increase the temperature
3. The material is made of a heat resistant alloy that is preventing the thermal energy from being fully absorbed
4. The material has already absorbed enough thermal energy and cannot absorb any more
The material is at its phase change temperature and the thermal energy is going to change the phase instead of increase the temperature.
What is latent heat?Latent heat is defined as the thermal energy absorbed or released during a phase change of a substance.
Latent heat can also be explained as the energy in hidden form which is supplied or extracted to change the state of a substance without changing its temperature.
From the above explanation, we can conclude that, the material is at its phase change temperature and the thermal energy is going to change the phase instead of increase the temperature.
Learn more about latent heat here: https://brainly.com/question/87248
_______ is an SI unit for mass.
A. mass
B. kilogram
C. newton
D. acceleration of gravity
E. weight
B. kilogram
I hope this helps you
:)
Answer:
B. kilogram
Explanation:
When stated in the unit J s, which is equal to kg m2 s1, the kilogram (kg) is defined by considering the fixed numerical value of the Planck constant h to be 6.62607015 1034 when expressed in the unit J s, which is equivalent to kg m2 s1. The United States Prototype Kilogram 20, a platinum-iridium cylinder held at NIST, is the country's principal mass standard. The kilogram was initially known as the Kilogram of the Archives, and it was defined as the mass of one cubic decimeter of water at its greatest density temperature. It was superseded by the International Prototype Kilogram following the International Metric Convention in 1875, which became the unit of mass without reference to the mass of a cubic decimeter of water or the Archives Kilogram. National Prototype Meters and Kilograms were allocated to each country that signed the International Metric Convention. Learn more about the kilogram's history and current definition. The kilogram (kg) is the only SI basic unit whose name and symbol incorporate a prefix for historical reasons. The SI prefix for 1000 or 103 is "kilo." Prefix names and symbols are attached to the unit name "gram," and prefix symbols are attached to the unit symbol "g," to create names and symbols for decimal multiples and submultiples of the unit of mass. Find out more about this historical oddity.
Units of Mass
10 milligrams (mg) = 1 centigrams (cg)
10 centigrams = 1 decigrams (dg) = 100 milligrams
10 decigrams = 1 gram (g)
10 decigrams = 1000 milligrams
10 grams = 1 dekagrams (dag)
10 dekagrams = 1 hectogram (hg)
10 dekagrams = 100 grams
10 hectograms = 1 kilogram (kg)
10 hectograms = 1000 grams
1000 kilograms = 1 megagram (Mg) or 1 metric ton (t)
A body's mass is a measurement of its inertial property, or the amount of stuff it contains. The force imposed on a body by gravity or the force required to maintain it is measured by its weight. On Earth, gravity accelerates a body downward at around 9.8 m/s2. In the context of weights and measurements, weight is frequently used as a synonym for mass. The verb "to weigh," for example, meaning "to ascertain the mass of" or "to have a mass of." Weight should be phased out in favor of mass, and the term mass should be used when mass is indicated. The kilogram is the SI unit of mass (kg). The weight of a body in a given reference frame is defined in science and technology as the force that causes the body to accelerate at the same rate as the local acceleration of free fall in that reference frame. As a result, the newton is the SI unit for the amount weight defined in this way (force) (N).
Which of the following is an example of the characteristic of excretion?
A) We shiver when we get cold.
B) Moss on the side of the tree is active even though it looks still.
C) Human kidneys produce urine.
D) A rabbit gets nutrients from a carrot.
Answer:
C
because urine is waste product
An object can not have a charge of?
Answer:
If an object is electrically neutral it has no net charge becuase it has the same number of protons as it does electrons, which are opposite charges that offset each other. No, that just means that the sum of all its positive and negative amounts of charge equals zero.
Explanation:
Twelve identical point charges q are equally spaced around the circumference of a circle of radius R. The circle is centered at the origin. One of the twelve charges, which happens to be on the positive x axis, is now moved to the center of the circle.
A) Determine the magnitude of the total electric force exerted on this charge.
Express your answer in terms of Coulomb's constant k and the variables q and R .
F total = ?
B)Determine the direction of the total electric force exerted on this charge.
Express your answer as an integer.
θ = ? degrees
Answer:
For B it is 0
Explanation:
I think