Cu20(s) + C(s) - 2Cu(s) + CO(g)
To perform this synthesis, the team added 114.2 grams of Cu20 to 11.1 grams of C to form 87.1 grams of Cu.
In this copper synthesis reaction, what is the limiting reagent and the excess reagent?

Answer:

you don't know the answer?ha me too

4,032

BT electron

nSO2= 3nFe/

Answer:

Explanation:

From the given information:

The structure of the triacylglyceride can be seen in the first image attached below and the products produced as the result of the reaction between Crisco and sodium hydroxide (NaOH) are Glycerol and 3-Palmitic acid as shown in the second image below.

Lastly, the purpose of the addition of ethanol is because water and oils are not miscible. Thus, ethanol has the potential to mix and dissolve in water as well as in oil on a selective partial level. This method aids in the formation of water, soap, salt, and fatty acids from the interaction between fatty acid and sodium hydroxide. As a result, ethanol improves the interaction between the water and the oil. It is less polar to water and aids in the dissolution of nonpolar fats such that sodium hydroxide may react with ethanol.

Answer:

Explanation:

1 Mole of Aluminum with mass 26.98g contains 6.02*10^23 atoms.

In 2.88g of Aluminum, there are 2.88/26.98*6.02*10^23 = 6.426*10^22 atoms.

Answer:

Explanation:

no of Al atoms = 2.88/26.98*6.02*10^23

= 6.426*10^22

= 6.43*10^22

Answer:

Part A

Ag+ is the Lewis acid and NH3 is the Lewis base.

Part B

AlBr3 is the Lewis acid and NH3 is the Lewis base.

Part C

AlCl3 is the Lewis acid and Cl− is the Lewis base.

Explanation:

A Lewis acid is any specie that accepts a lone pair of electrons. Ag^+, AlBr3 and AlCl3 all accepted lone pairs of electrons according to the three chemical reaction equations shown. Hence, they are Lewis acids.

A Lewis base donates a lone pair of electrons. They include neutral molecules having lone pair of electrons such as NH3 or negative ions such as Cl- .

Answer:

Hi so your answer is that to helping fix the climate change you have to : speak up , power your home with renewable engery , reduce water waste , dont waste food , and finally invest energy .

Explanation:

Really hope i helped , have a nice day :)

Answer:

we can reduce air pollution,which is one of the main cause of climate change.Climate change is not a hoxe if it is not attending the upcoming generations will suffer greatly.

Answer:

MgO

Explanation:

Answer:

"The total pressure in a mixture of gases is equal to the sum of partial pressures of each gas"

Explanation:

Dalton's law of partial pressures state that, in a mixture of gases, the total pressure is equal to the sum of the partial pressure exerted by each gas of the mixture. The equation is:

Total pressure = Partial pressure Gas 1 + Partial pressure Gas 2 + .... + Partial pressure Gas n

To complete the sentence we can say:

"The total pressure in a mixture of gases is equal to the sum of partial pressures of each gas"

Considering the Dalton's partial pressure, the total pressure in a mixture of gases is equal to the sum of partial pressures of each gas.

The pressure exerted by a particular gas in a mixture is known as its partial pressure. So, Dalton's law states that the total pressure of a gas mixture is equal to the sum of the pressures that each gas would exert if it were alone:

[tex]P_{T} =P_{A} +P_{B}[/tex]

This relationship is due to the assumption that there are no attractive forces between the gases.

Dalton's partial pressure law can also be expressed in terms of the mole fraction of the gas in the mixture. The mole fraction is a dimensionless quantity that expresses the ratio of the number of moles of a component to the number of moles of all the components present.

So in a mixture of two or more gases, the partial pressure of gas A can be expressed as:

[tex]P_{A} =x_{A} P_{T}[/tex]

In summary, the total pressure in a mixture of gases is equal to the sum of partial pressures of each gas.

Learn more:

Answer:

tge answer is a

Explanation:

I'm smart like that

Answer:

Explanation:

The pH of a solution can be found by using the formula

[tex]pH = - log [ { H_3O}^{+}][/tex]

From the question we have

[tex]ph = - log(7.8 \times {10}^{ - 13} ) \\ = 12.1079...[/tex]

We have the final answer as

Hope this helps you

The pH of this solution with a 7.8 × 10⁻¹³ M concentration of hydronium ion is equal to: D. 12.

Given the following data:

Concentration of hydronium ion = 7.8 × 10⁻¹³ M.

pH is literally the power of hydrogen ions and it can be defined as a measure of the molar concentration of hydrogen ions in a given solution.

We would determine the pH of this solution by using this formula;

pH = -log[H⁺]

pH = -log(7.8 × 10⁻¹³).

pH = -(-12.1)

pH = 12.1 ≈ 12.

Read more on pH here: brainly.com/question/24233266

#SJP2

Answer:

Wide melting point range - impure sample with multiple compounds

Experimental melting point is close to literature value - pure sample of a single compound

Experimental melting point is below literature value - impure sample with multiple compounds

Narrow melting point range - pure sample of a single compound

Explanation:

The melting point of substances are easily obtainable from literature such as the CRC Handbook of Physics and Chemistry.

A single pure substance is always observed to melt within a narrow temperature range. This melting temperature is always very close to the melting point recorded in literature for the pure compound.

However, an impure sample with multiple compounds will melt over a wide temperature range. We also have to recall that impurities lower the melting point of a pure substance. Hence, the experimental melting point of an impure sample with multiple compounds is always below the literature value.

Explanation:

2. [tex]2C_2H_6 + 7O_2 \rightarrow 4CO_2 + 6H_2O[/tex]

First, we need to find the number of moles of [tex]CO_2[/tex] at 300K and 1.5 atm using the ideal gas law:

[tex]n= \dfrac{PV}{RT}= \dfrac{(1.5\:\text {atm})(33\:L)}{(0.082\:\text{L-atm/mol-K})(300K)}[/tex]

[tex]=2.0\:\text{mol}\:CO_2[/tex]

Now use the molar ratios to find the number of moles of ethane to produce this much [tex]CO_2[/tex].

[tex]2.0\:\text{mol}\:CO_2 \times \left(\dfrac{2\:\text{mol}\:C_2H_6}{4\:\text{mol}\:CO_2}\right)[/tex]

[tex]=1.0\:\text{mol}\:C_2H_6[/tex]

Finally, convert this amount to grams using its molar mass:

[tex]1.0\:\text {mol}\:C_2H_6 \times \left(\dfrac{30.07\:\text g\:C_2H_6}{1\:\text{mol}\:C_2H_6} \right)[/tex]

[tex]=30.1\:g\:C_2H_6[/tex]

3. [tex]3Zn + 2H_3PO_4 \rightarrow 3H_2 + Zn_3(PO_4)_2[/tex]

Convert 75 g Zn into moles:

[tex]75\:\text g\:Zn \times \left(\dfrac{65.38\:\text g\:Zn}{1\:\text{mol}\:Zn}\right)=1.1\:\text{mol}\:Zn[/tex]

Then use the molar ratios to find the amount of H2 produced.

[tex]1.1\:\text{mol}\:Zn \times \left(\dfrac{3\:\text{mol}\:H_2}{3\:\text{mol}\:Zn}\right)=1.1\:\text{mol}\:H_2[/tex]

Now use the ideal gas law [tex]PV=nRT[/tex] to find the volume of H2 produced at 23°C and 4 atm:

[tex]V= \dfrac{nRT}{P}= \dfrac{(1.1\:\text{mol}\:H_2)(0.082\:\text{L-atm/mol-K})(296K)}{4\:\text{atm}}[/tex]

[tex]=8.9\:\text L\:H_2[/tex]

Answer:

2–methylbutane

Explanation:

To name the compound given above, the following must be obtained:

1. Determine the longest continuous carbon chain. This gives the parent name of the compound.

2. Determine the substituent group attached.

3. Determine the position of the substituent group by giving it the lowest possible count..

4. Combine the above to obtain the name of the compound.

With the above information, we can name the compound as follow:

1. The longest continuous carbon chain of the compound is 4. Thus, the parent name is butane.

2. The substituent group attached to the compound is methyl (–CH₃).

3. The methyl (–CH₃) group is located at carbon 2 (i.e counting from the left side).

4. The name of the compound is:

2–methylbutane

Explanation:

the answer is in the image above

Answer:

7 L of H₂.

Explanation:

The balanced equation for the reaction is given below:

2H₂ + O₂ —> 2H₂O

From the balanced equation above,

1 L of O₂ required 2 L of H₂.

Finally, we shall determine the volume of H₂ required to react with 3.5 L of O₂. This can be obtained as follow:

From the balanced equation above,

1 L of O₂ required 2 L of H₂.

Therefore, 3.5 L of O₂ will require

= 3.5 × 2 = 7 L of H₂.

Thus, 7 L of H₂ is required to for the reaction.

Characteristic properties are used because the sample size and the shape of the substance does not matter.

Answer:

soy....plant protein also is found in vegtables and grain products.

The protein that is derived from the plant is soyabean. Protein-rich foods have a rich source of amino acids. Amino acids are required by the body for different cellular activities.

Proteins are present in plant-based foods and animal-based foods. In nature, the plant-based foods that are rich in proteins are soybeans, beans etc. Animal products such as dairy products, milk, and cheese are rich sources of proteins.

Animal-based foods such as eggs, meat, and fish have a good amount of protein. The proteins are made up of amino acids. Peptide bonds connect each amino acid to the next.

Proteins are necessary for the body, as cells need amino acids for both structural and functional support. Not all cells of the body synthesise all amino acids. Some essential amino acids are required by the body and can be taken from external sources such as plants.

Hence, the plant-based protein is soyabean.

To learn more about the protein, here

https://brainly.com/question/17095120

#SPJ2.

The question is incomplete; the complete question may be the following:

1) Which of the following is a protein source of plant origin?

A)egg

B) Soyabean

C)cheese

D)Milk

Answer:

A

Explanation:

Answer:

Hence, option B is correct. 1 and 2

Explanation:

NH 4 Cl is a weak base-strong acid salt.

NaCN is a salt of a strong base (NaOH) and weak acid (HCN).In water,

1. NH 4 Cl produces acidic solution

2. KHSO 4 produces acidic solution

because the neutral salt of strong base KOH and strong acid H 2 SO 4 is K 2 SO 4

3. NaCN produces basic solution

4. KNO

3 produces neutral solution

I think this is right but I hope its help ,ur welcome ♥️♥️

Answer:

H+

Explanation:

I took the test :)

Answer:

the mass of salt

Explanation:

In an experiment, we have an independent variable and dependent variable. The independent variable is the variable that is manipulated to cause changes in other variable while the dependent variable is the variable that responds to the changes made to the independent variable and is measured.

In this case of experiment, the mass of the salt is the DEPENDENT VARIABLE while the different temperatures is the INDEPENDENT VARIABLE. In a graphical representation, the independent variable is always plotted on the x-axis or horizontal axis while the dependent variable is always plotted on the y-axis or vertical axis.

Since the dependent variable is the mass of the salt, it should be plotted on the y axis.

Answer:

The temperature of water

Explanation:

I took the test

Answer:

hey there

Explanation:

CN- (aq) + H+ (aq) → HCN(I)

The reactants are aqueous solutions:

NaCN(aq) and HBr(aq)

When you mix these compounds you make pure HCN (I)

The molecular equation is:

NaCN(aq) + HBr(aq) → NaBr(aq) + HCN(I)

When you dissociate the reactants, you have: Nat(aq) +CN¯(aq) + H*(aq) + Br−(aq) → Nat(aq) + ->

Br (aq) + HCN(I)

Sodium bromide, it is a salt, that can also be

dissociated in the solution

To make, the net ionic equation you remove the repeated ions

CN- (aq) + H+ (aq) → HCN(I)

If you like my answer please mark as brainliest

Answer:

A) 1.3 × 10⁻⁵ mol/L

Explanation:

Step 1: Write the balanced equation for the solution of AgCl

AgCl(s) ⇄ Ag⁺(aq) + Cl⁻(aq)

Step 2: Make an ICE Chart

        AgCl(s) ⇄ Ag⁺(aq) + Cl⁻(aq)

I                           0             0

C                        +S            +S

E                          S              S

If we replace the solubility (S) in the Ksp expression, we get,

Ksp = [Ag⁺] [Cl⁻] = S × S = S²

S = √Ksp = √1.8 × 10⁻¹⁰ = 1.3 × 10⁻⁵ mol/L

Answer:

C. To remove any source of bias in an experience

Answer:

Below

Explanation:

Got it right

Check the periodic table, then click electrons

Hydrogen sulfide ions, dihydrogen phosphate, and water are amphoteric. Therefore, option (a), (c), and (d) are correct.

Amphoteric can be stated as any compound that can be mixed with other compounds both as a base and an acid. Water is amphoteric as it can be transformed into a compound that can be mixed as an alkali or an acid.  

Amphoterism is explaining the reactivity of a compound that indicates alkaline nature when mixed with an acid and describes acidic characteristics in an alkaline environment.

When acid reacts with water, it forms H₃O⁺ ion adding an H⁺ ion from the acid. When water is combined with a base, it donates a hydrogen H⁺ ion to the base and releases a hydroxide ion.

Besides water, there are many oxides and hydroxides are utilized in amphoterism. The substances that have both characteristics acids are proton donors and bases are proton acceptors are identified as amphoteric substances.

Therefore, HS⁻, H₂O, and H₂PO₄⁻ are amphoteric in nature.

Learn more about amphoteric, here:

https://brainly.com/question/2908795

#SPJ5

Answer:

Explanation:

Diels-Alder reactions are cyclo-additional reactions between conjugated dienes and a dienophile (a substituted alkene compound for example acrylic acid) to produce a ring structure of cyclohexene compounds.

From the image attached below, we will see the reaction between 2,3-dimethylbuta-1,3-diene which is a conjugated diene with acrylic acid to produce a Diel-Alder adduct as the product.  From the reaction, a single new π-bond and two σ-bonds are produced.