1. A hockey puck has a mass of 0.115-kg and strikes the pole of the net at (37 m/s)x. It bounces off in the opposite direction at (-25 m/s)x +(5 m/s)y. (A) What is the impulse on the puck? (B) If the collision takes .005s what is the force acted on the puck?

Answer:

They're are Conditions .... (L00K D0WN.)

Explanation:

Conditions for equilibrium require that the sum of all external forces acting on the body is zero (first condition of equilibrium), and the sum of all external torques from external forces is zero (second condition of equilibrium). These two conditions must be simultaneously satisfied in equilibrium.

Answer:

C

Explanation:

because that's how science works

Thermal energy is involved when water changes from one phase to the next. Option A is correct.

Latent heat is the heat needed for the phase change . When the temperature remains constant during melting or boiling, the added energy is employed in the phase change process.

The total number of water particles remains constant when water changes states throughout the water cycle.

When water alterations from one phase to the next, thermal energy is involved. Latent heat is the storage of thermal energy.

Hence, option A is correct.

To learn  more about the latent heat, refer;

https://brainly.com/question/87248

#SPJ2

Hi there!

Recall that:
[tex]\Delta V = -\int\limits^a_b {E \cdot } \, dx[/tex]

Given an electric field, the potential difference can be solved by using integration. Similarly:
[tex]E = -\frac{dV}{dx}[/tex]

We can differentiate the electric potential equation to solve for the electric field.

Use the power rule:
[tex]\frac{dy}{dx} x^n = nx^{n - 1}[/tex]

Differentiate the given equation.

[tex]-\frac{dV}{dx}\frac{7}{x^2} =- \frac{dV}{dx}7x^{-2} = -(-14x^{-3}) = \frac{14}{x^3}[/tex]

Or:
[tex]\boxed{E(x) = \frac{14}{x^3}}[/tex]

The component of the electric field in that region is E = 14/x³ if the electric potential in a region is given by v(x)=7/x2

An electric field is an electric property that is connected with any location in space where a charge exists in any form. The electric force per unit charge is another term for an electric field.

We have:

The electric potential in a region is given by:

[tex]\rm V(x) = \frac{7}{x^2}[/tex]

We know the relation between potential difference and an electric field is given by:

[tex]\rm \triangle V = \int\limits^a_b {E.} \, dx[/tex]

If the electric field is given, then:

[tex]\rm E = -\frac{dV}{dx}[/tex]

[tex]\rm E = -\frac{d(7x^{-2} )}{dx}[/tex]

After differentiate:

[tex]\rm E = -(-14x^{-3})[/tex]  or

[tex]\rm E = \frac{14}{x^3}[/tex]

Thus, the component of the electric field in that region is E = 14/x³ if the electric potential in a region is given by v(x)=7/x2

Learn more about the electric field here:

https://brainly.com/question/26690770

#SPJ4

Answer:

I = Q / t          definition of current I

Q = i t = 10 Coul/sec * 60 sec = 600 Coul

A 10-A current is maintained in a simple circuit with a total resistance of 209 ohms, then the net charge passes through any point in a circuit during a 1-minute interval would be 6000 Coulombs.

Charged material experiences a force when it is exposed to an electromagnetic field due to the physical property of electric charge. You can have a positive or negative electric charge.

Electric current is defined as the charge per unit of time.

The mathematical relation between current and the electric charge

I =Q/T

Let us first convert the time period of minutes into seconds

1 min = 60 seconds

10  min = 10*60 seconds

            =600 seconds

Q = I*t

   =10*600

   =6000 Amperes

Thus, the net charge that passes through any point in a circuit during a 1-minute interval would be 6000 Amperes.

To earn more about an electric charge from here, refer to the link;

brainly.com/question/8163163

#SPJ2

The specific heat capacity of the calorimeter used in mixing the water is determined as 21.87 J/g⁰C.

The heat capacity of the calirometer is determined by applying the principle of conservation of energy.

Heat lost by the hot water = Heat gained by the calirometer

[tex]Q _w = Q_c\\\\M_w C_w\Delta \theta _w = M_c C_c\Delta \theta _c[/tex]

where;

mass = density x volume = ρV

Density of water = 1 g/ml

Mass of hot water = 1 x (50) = 50 g

Mass of water in calorimeter = 1 x (60) = 60 g

[tex]\Delta T_c = 5.5\\\\T - 25 = 5.5\\\\T = 30.5 \ ^0C[/tex]

[tex]50 \times 4.184 \times (65 - 30.5) = 60 \times C_c \times (30.5 - 25)\\\\7217.4 = 330C_c\\\\C_c = \frac{7217.4}{330} \\\\C_c = 21.87 \ J/g^0C[/tex]

Thus, the specific heat capacity of the calorimeter used in mixing the water is determined as 21.87 J/g⁰C.

The complete question is below

When using a different calorimeter, and mixing 50 ml of hot water at

65 degrees C with 60 ml of water in the calorimeter at 25 degrees C, the temperature of the calorimeter increased by 5.5 degrees C.

a. Calculate the heat capacity of this calorimeter?

Learn more about heat capacity here: https://brainly.com/question/16559442

The force at which the arrow moved when an archer shot a 0.04 kg arrow at a target is 280 N.

Force is the product of mass and acceleration.

To calculate the amount of force the arrow moves, we use the formula below.

Formula:

Where:

From the question,

Given:

Substitute these values into equation 2

Hence, the force at which the arrow moved is 280 N.

Learn more about force here: https://brainly.com/question/18762601

Answer:

its called a fault

Explanation:

Its when u mess up

Answer:

yes

true

Explanation:

because earth is rotation

Explanation:

Multiply the time by the acceleration due to gravity to find the velocity when the object hits the ground. If it takes 9.9 seconds for the object to hit the ground, its velocity is (1.01 s)*(9.8 m/s^2), or 9.9 m/s

Answer:

800 feet per sec.

Explanation:

Converting it over from 105.1mph to ft per sec is only about 154.15fps.

Glass is known to be a good insulator because atoms in glass hold on tightly to their positively charged particles.

Insulators are those substances that do not conduct heat or electricity like their conductor counterparts.

Conduction of electric charges is as a result of the free flow of electrons in the atom of the substance.

Hence, a good insulator holds on tightly to its electrons and prevent them from flowing freely to conduct electric charges.

Therefore, Glass is known to be a good insulator because atoms in glass hold on tightly to their positively charged particles.

Learn more about insulators at: https://brainly.com/question/24909989

It's the first answer, The atoms in glass hold on tightly to their positively charged particles.

- CONNECTIONS
---

much love <3

Answer:

your mom g

Explanation:

DRACO SEASON WITH THE BOOK BAG

Answer:

Aeroplane

Explanation:

they have tail surfaces to stabilize the wings

Force is a vector, as such we know that the force required to crack a nut is the resultant of the individual forces applied form all sides of the nut.

The term force is used to describe that which causes a change in the position of an object. Now the question is incomplete but I will try to help you the much I can.

Recall that force is a vector quantity. Hence the magnitude of the force required to crack a nut is the resultant of the individual forces applied form all sides of the nut.

Learn more about force: https://brainly.com/question/26115859

[tex]\text{Density,}\\\\~~~~~~~~\rho = \dfrac mV\\\\\\\implies V = \dfrac m{\rho}\\\\\\\implies V = \dfrac{7 \times 10^{-3}~ \text{kg}}{\tfrac{5.6 \times 10^{-3}~ \text{kg}}{ 10^{-6} ~\text{m}^3} }\\\\ \\\implies V = \dfrac{7 \times 10^{-3}~ \text{kg}}{5.6 \times 10^{-3} \times 10^6~~ \text{kg}~ \text{m}^{-3}}\\\\\\ \implies V = 1.25 \times 10^{-6}~ \text m^3\\\\\\\implies V =0.00000125~ \text m^3\\\\\text{Hence the volume of the coin is 0.00000125}~ \text m^3[/tex]

Explanation:

If the size and direction of the forces on the object are exactly balanced , then there is no net force acting on the object

The number of seconds that the dive will take if peregrine falcon dove at its maximum speed for half a mile is 9 seconds.

From the complete information, it was stated that the peregrine falcon can reach speed of up to 200 miles per hour.

Therefore, the number of seconds that the dice would take for half a mile will be calculated thus:

1 hour = 200 miles

3600 seconds = 200 miles

1 second will be: = (200/3600) = 0.056 miles

Therefore, the time will be:

200miles / 1 hour = 0.x

x = 0.0025 hours

Therefore, 0.0025 hours will be:

= 0.0025 × 3600

= 9 seconds.

Learn more about time taken on:

https://brainly.com/question/4931057

Answer:

The energy of a mechanical wave can travel only through matter. The matter through which the wave travels is called the medium (plural, media). The medium in the water wave pictured above is water, a liquid. But the medium of a mechanical wave can be any state of matter, even a solid.

Explanation:

Brainlest pls if can thank you ! i hope its helped

Answer:

1. Why does a magnet exert force on another magnet when the two magnets are not in contact? The magnetic field from north to south increases when they're closer together, and when they repel the repelling force increases as well. This is all due to the magnetic field.

Correct me if I'm wrong, Hope this helps

Favor(Brainliest)

#Carryonlearning

Answer:

The electron moves undeflected through the field

The reactions of the citric acid cycle that provide reducing power for the electron‑transport chain are as follows:

Citric acid cycle also known as kreb cycle is a series of biochemical reactions that involves the synthesis of reduced electron carrier and ATP.

The following steps in the citric acid cycle involves the provision of reducing power for the electron‑transport chain:

Learn more about citric acid cycle: https://brainly.com/question/11459709

The reactions of the citric acid cycle which provide reducing power for the electron‑transport chain are:

Citric acid cycle, is the tricarboxylic acid cycle (TCA), which is the combination of chemical reaction. This reaction is necessary to produce the energy in aerobic organisms.

The reactions of the citric acid cycle which provide reducing power for the electron‑transport chain are:

Hence, the option 1,3 and 4 is correct.

Learn more about the citric acid cycle here;

https://brainly.com/question/11238674

#SPJ4

Explanation:

because conduction takes place in objects whose particles are close/touching each other therefore conduction happens in solid as liquid and gas paricles are not close to each other

Answer:

1.36 meters

Explanation:

we just plug in the values into the formula given in the question

3.4/2.5 = answer

answer is 1.36

The statement the power of an electric heater is 1200 W means that the electric heater used up 1200 J of electric energy in one second.

When the velocity of a moving body is doubled, its kinetic energy will become four times its initial kinetic energy.

Power is the rate at which energy is used up. The s.i unit of power is Watt (W).

From the question, if an electric heater is 1200 W, it means that the electric heater used up 1200 J of electric energy in one second

Kinetic energy is the energy of a body in motion.

The formula for the kinetic energy of a body is given as

From the equation above, it can be seen that if the velocity of a moving body is doubled, the kinetic energy of the body will become four times the initial kinetic energy of the body.

Hence, The statement the power of an electric heater is 1200 W means that the electric heater used up 1200 J of electric energy in one second.

When the velocity of a moving body is doubled, its kinetic energy will become four times its initial kinetic energy.

Learn more about electric power here: https://brainly.com/question/24858512

She need to release the cluch slowly and apply force on the accelator other than place her vehicle's gear in Drive and accelerate

We drive a car by applying pressure on the accelator, remove foot from the brakes and releasing cluch slowly. When the vehicle get speed, we have to change the gear.

So we can conclude that She need to release the cluch slowly and apply force on the accelator for driving a car.

Learn more about accelaration here: https://brainly.com/question/605631

The difference between the majority viewpoint and the minority view is that the majority group is made to feel normal and the minority group is made to feel divergent.

A vantage point or point of view from which something is viewed or assessed is known as the viewpoint The story is narrated from a variety of perspectives, including two major ones and several smaller ones.

Most studies comparing majority versus minority influence argue the author, places a premium on influence in the sense of prevailing. In this context.

There is evidence that majorities have greater public influence than minorities, and that minority impact when it happens, is mostly latent. In the current version,

Hence the difference between the majority viewpoint and the minority view is that the majority group is made to feel normal and the minority group is made to feel divergent.

To learn more about the viewpoint refer to the link;

https://brainly.com/question/1043206

    Answer:  D        

Explanation:

Simplified for you.

Answer:

The two factors that affect the type of Shadows formed are stated below ::

Answer:

The distance of the source of light from the object.

The angle at which the light rays fall on the object.

The size of the opaque object.

The size of the shadow depends on the distance of the source of light and on the angle at which the light rays fall on the object.

If the source of light is closer to the object, a larger shadow is formed than when the source of light is far from the object.

Explanation:

picture is in the top ️️️⬆️⬆️⬆️⬆️⬆️

It can be observed from the above figure that as the angle of light incident on the object changed the length of the shadow changed.

Hope you like this

Answer:

C. buried feelings in the unconscious

Explanation:

Hope that helps!

Sigmund Freud believed mental disorders were caused when an individual has buried feelings in the unconscious.

Mental disorders are illnesses that impact your thoughts, feelings, emotions, and behavior.

They might be short-term or long-term. They can have an impact on your capacity to interact with others and operate on a daily basis.

There are several sorts of mental illnesses. Panic disorder, obsessive-compulsive disorder, and phobias are examples of anxiety disorders.

Depression, bipolar illness, and other mood disorders are all examples of mood disorders.,

To learn more about the mental disorder refer to the link;

https://brainly.com/question/939408

(a) The wavelength of the resonance created is 0.8 m.

(b) The speed of the sound in the fundamental mode is 400 m/s.

(c) The low value of speed of speed of sound in water calculated may be as a result of low temperature of the water poured into the cooking pot.

The wavelength of the resonance created is determined by assuming the cooking pot to be a closed pipe.

Wavelength of fundamental mode of a closed pile = 4L

where;

λ = 4 x 0.2 = 0.8 m

The speed of the sound in the fundamental mode is calculated as follows;

v = fλ

v = 500 x 0.8

v = 400 m/s

Sound wave is directly proportional to temperture, as the temperature of the water increases, the speed of sound increases as well.

The low value of speed of speed of sound in water calculated may be as a result of low temperature of the water poured into the cooking pot.

Learn more about speed of sound here: https://brainly.com/question/2142871