The probability of the ball landing on a red slot on the next spin is still 18/38 or approximately 0.4737 or 47.37%.
The probability of the ball landing on a red slot on a single spin of a standard roulette wheel is 18/38 or approximately 0.4737 or 47.37%. This is because there are 18 red slots out of a total of 38 slots on the wheel.
The outcome of the previous 210 spins has no effect on the probability of the ball landing on a red slot on the next spin. Each spin is an independent event, and the probability of the ball landing on a red slot remains the same for each spin.
Therefore, even though the ball has landed on a red slot for the past 210 spins, the probability of it landing on a red slot on the next spin is still 18/38 or approximately 0.4737 or 47.37%.
To know more about probability, refer here:
https://brainly.com/question/30034780#
#SPJ11
1.155 How much vitamin C do you need? The U.S. Food and Nutrition Board of the Institute of Medicine, working in cooperation with scientists from Canada, have used scientific data to answer this question for a variety of vitamins and minerals. 42 Their methodology assumes that needs, or requirements, follow a distribution. They have produced guidelines called dietary reference intakes for different gender-by-age combinations. For vitamin C, there are three dietary reference intakes: the estimated average requirement (EAR), which is the mean of the requirement distribution; the recommended dietary allowance (RDA), which is the intake that would be sufficient for 97% to 98% of the population; and the tolerable upper level (UL), the intake that is unlikely to pose health risks. For women aged 19 to 30 years, the EAR is 60 milligrams per day (mg/d), the RDA is 75 mg/d, and the UL is 142 2000 mg/d. 43 (a) The researchers assumed that the distribution of requirements for vitamin C is Normal. The EAR gives the mean. From the definition of the RDA, let’s assume that its value is the 97.72 percentile. Use this information to determine the standard deviation of the requirement distribution. (b) Sketch the distribution of vitamin C requirements for 19- to 30-year-old women. Mark the EAR, the RDA, and the UL on your plot.
(a) The standard deviation of the required distribution for vitamin C is approximately 7.98 mg/d.
(B) The plot should show a bell-shaped curve centered at 60 mg/d, with the RDA located slightly to the right of the center.
(a) To determine the standard deviation of the required distribution for vitamin C, we can use the information provided about the estimated average requirement (EAR) and the recommended dietary allowance (RDA). The EAR is the mean of the distribution (60 mg/d), and the RDA (75 mg/d) is assumed to be the 97.72 percentile.
We can use the Z-score formula to find the standard deviation:
Z = (X - μ) / σ
Where Z is the Z-score, X is the value of the RDA, μ is the mean (EAR), and σ is the standard deviation.
First, find the Z-score corresponding to the 97.72 percentile. Using a standard normal table or calculator, we find that Z ≈ 2.0.
Now, plug in the values into the Z-score formula:
2.0 = (75 - 60) / σ
σ = (75 - 60) / 2.0
σ = 15 / 2.0
σ = 7.5 mg/d
Plugging in the values, we get:
1.88 = (75 - 60) / σ
Solving for σ, we get:
σ = (75 - 60) / 1.88 = 7.98
The standard deviation of the required distribution is 7.5 mg/d.
(b) To sketch the distribution of vitamin C requirements for 19- to 30-year-old women, follow these steps:
1. Draw a normal distribution curve.
2. Mark the mean (EAR) at 60 mg/d on the horizontal axis.
3. Mark the RDA at 75 mg/d and the UL at 2000 mg/d on the horizontal axis.
4. Indicate that the standard deviation is 7.5 mg/d.
The distribution of vitamin C requirements for 19- to 30-year-old women is Normal, with a mean of 60 mg/d and a standard deviation of 7.98 mg/d. The EAR, RDA, and UL can be marked on the plot as follows:
- EAR: 60 mg/d, located at the center of the distribution
- RDA: 75 mg/d, located at the 97.72 percentile of the distribution
- UL: 2000 mg/d, located at the far right end of the distribution (beyond the range of the plot)
Learn more about Standard Deviation:
brainly.com/question/23907081
#SPJ11
The management of First American Bank was concerned about the potential loss that might occur in the event of a physical catastrophe such as a power failure or a fire. The bank estimated that the loss from one of these incidents could be as much as $100 million, including losses due to interrupted service and customer relations. One project the bank is considering is the installation of an emergency power generator at its operations headquarters. The cost of the emergency generator is $800,000, and if it is installed, no losses from this type of incident will be incurred. However, if the generator is not installed, there is a 10% chance that a power outage will occur during the next year. If there is an outage, there is a .05 probability that the resulting losses will be very large, or approximately $80 million in lost earnings. Alternatively, it is estimated that there is a .95 probability of only slight losses of around $1 million. Using decision tree analysis, determine whether the bank should install the new power generator.
The expected loss without the generator ($495,000) is less than the cost of installing the generator ($800,000), it would not be economically justifiable for the bank to install the new power generator based on this decision tree analysis.
The management of First American Bank faces a decision regarding the installation of an emergency power generator to mitigate potential losses from physical catastrophes such as power failures or fires.
To evaluate this decision, we can use decision tree analysis.
Without the generator, there is a 10% chance of a power outage. In the event of an outage, there is a 0.05 probability of very large losses ($80 million) and a 0.95 probability of slight losses ($1 million). To calculate the expected loss from not installing the generator, we can use the following formula:
Expected loss = (probability of outage) x [(probability of large loss x large loss amount) + (probability of slight loss x slight loss amount)]
Expected loss = 0.1 x [(0.05 x $80 million) + (0.95 x $1 million)]
Expected loss = 0.1 x [$4 million + $950,000]
Expected loss = 0.1 x $4.95 million
Expected loss = $495,000
Now let's compare this expected loss to the cost of installing the emergency power generator, which is $800,000. Since the expected loss without the generator ($495,000) is less than the cost of installing the generator ($800,000), it would not be economically justifiable for the bank to install the new power generator based on this decision tree analysis.
To learn more about probability click here
brainly.com/question/30034780
#SPJ11
Two cards are drawn together from a pack of 52 cards. What is the probability that one card is clubs and one card is spades
For a pack of 52 cards, two cards are drawn together, the probability that one card is clubs and one card is spades is equals to the
[tex]= \frac{13}{102}[/tex]
Probability is chances of occurrence of an event. It is calculated by dividing the favourable response to the total possible outcomes. We have a pack of 52 cards. Let's consider an event E : card is one card is culb and one is spade
Total possible outcomes = 52
Two cards are drawn together from a pack. So, number of total possible outcomes for drawing two cards from a pack, n(T) = ⁵²C₂ = 1326
In a 52 cards pack, number of spades = 13
Number of clubs cards in pack = 13
Number of ways of choosing/drawing one spades card out of 13 and one one clubs out of 13 cards, n(E) = 169
Probability that one card is clubs and one card is spades on drawing two cards,
[tex] P(E) = \frac{ n(E)}{n(T)}[/tex]
[tex]= \frac{169}{1326}[/tex]
[tex]= \frac{13}{102}[/tex]
Hence, required probability value is [tex]= \frac{13}{102}[/tex].
For more information about probability, visit:
https://brainly.com/question/25870256
#SPJ4
When cane sugar is dissolved in water, it converts to invert sugar over a period of several hours. The percentage f(t) of unconverted cane sugar at time t (in hours) satisfies f?=-0.6f.a)What percentage of cane sugar remains after 5 hours?b)What percentage of cane sugar remains after 10 hours?
When cane sugar is dissolved in water, it converts to invert sugar over a period of several hours. The percentage of cane sugar that remains after 5 hours is 55.5%.
Given, f?(t) = -0.6f(t)
a) To find the percentage of cane sugar that remains after 5 hours, we need to solve the differential equation with an initial condition that f(0) = 100 (assuming all cane sugar is present at t=0).
Separating the variables, we have:
1/f(t) df/dt = -0.6
Integrating both sides with respect to t, we get:
ln|f(t)| = -0.6t + C
where C is the constant of integration.
Using the initial condition, we have:
ln|100| = -0.6(0) + C
C = ln|100|
Substituting the value of C, we get:
ln|f(t)| = -0.6t + ln|100|
Simplifying the expression, we get:
ln|f(t)/100| = -0.6t
Taking the exponential of both sides, we get:
|f(t)/100| = e^(-0.6t)
Since f(t) represents the percentage of unconverted cane sugar, we have:
[tex]f(t)/100 = e^{(-0.6t)[/tex]
Substituting t=5, we get:
f(5)/100 = [tex]e^{(-0.6*5)[/tex]
f(5) = 55.5
Therefore, the percentage of cane sugar that remains after 5 hours is 55.5%.
b) To find the percentage of cane sugar that remains after 10 hours, we can use the same differential equation and solve with the initial condition that f(0) = 100.
Following the same steps as above, we get:
Following the same steps as above, we get:
f(10) = 23.1
Therefore, the percentage of cane sugar that remains after 10 hours is 23.1%.
For more details regarding percentage, visit:
https://brainly.com/question/29306119
#SPJ1
Determine whether the infinite geometric series is convergent or divergent. If it is convergent, find its sum. (If the series is divergent, enter DIVERGENT.) 1 1 5 1 25 1 125
The sum of the convergent geometric series is 5/4, or 1.25. The given infinite geometric series is 1, 1/5, 1/25, 1/125, ...
To determine if this series is convergent or divergent, we need to examine the common ratio (r) between each term. The common ratio can be calculated by dividing a term by its previous term. For example, (1/5) / 1 = 1/5, (1/25) / (1/5) = 1/5, and so on. Thus, the common ratio (r) is 1/5.
A geometric series converges if the absolute value of its common ratio is less than 1 (i.e., |r| < 1). In this case, since |1/5| < 1, the series is convergent.
To find the sum of the convergent geometric series, we use the formula:
S = a / (1 - r)
where S is the sum of the series, a is the first term, and r is the common ratio.
Here, a = 1 and r = 1/5. Plugging these values into the formula, we get:
S = 1 / (1 - (1/5))
S = 1 / (4/5)
S = 5/4
Thus, the sum of the convergent geometric series is 5/4, or 1.25.
Learn more about geometric here:
https://brainly.com/question/13008517
#SPJ11
10. The shape of radishes may be long (SLSL), round (SRSR), or oval (SLSR). If long radishes are crossed to oval radishes and the F1 is then allowed to cross at random among themselves, what phenotypic ratio is expected in the F2
When long radishes (SLSL) are crossed to oval radishes (SLSR), the F1 generation will all have the genotype SLSR because they inherit one allele for long shape from one parent and one allele for oval shape from the other parent. When the F1 generation is allowed to cross at random among themselves, the expected phenotypic ratio in the F2 generation will be 1:2:1 for long:round: oval.
This is because each F1 individual can produce gametes with either the S allele or the L allele, and the S allele is dominant over the L allele for determining shape.
So, when two F1 individuals with the SLSR genotype cross, there are four possible offspring genotypes: SSLR (long), SLSR (long), SRSR (round), and SLSL (oval). The probability of each genotype is 1/4. However, since the S allele is dominant over the L allele, both the SSLR and SLSR genotypes will express the long-shape phenotype. Thus, the phenotypic ratio in the F2 generation will be 1 long: 2 round: 1 oval.
In summary, when long radishes are crossed to oval radishes and the F1 generation is allowed to cross at random among themselves, the expected phenotypic ratio in the F2 generation will be 1 long : 2 round : 1 oval.
Learn more about radishes here:
https://brainly.com/question/19264235
#SPJ11
Suppose the probability of event E is 1. Then a. it is impossible for event E to occur. b. event E will definitely occur. c. event E is disjoint. d. event E is dependent.
If the probability of event E is 1, then event E will definitely occur. Therefore, the correct answer is b.
It is important to note that if the probability of an event is 1, then it is certain to occur and there is no possibility of it not occurring. This means that event E is not impossible (a), not disjoint (c), and not dependent (d) since it will occur regardless of any other events. Based on the information provided, if the probability of event E is 1, then option b. event E will definitely occur. This is because a probability of 1 indicates that the event is certain to happen.
More on probability: https://brainly.com/question/6012025
#SPJ11
Suppose the p-value in a two-tailed statistical test was found to be 0.0670. If we were to use the same population, sample, and null hypothesis value, what would be the p-value for a corresponding left-tailed test
To find the p-value for a corresponding left-tailed test, we need to divide the original p-value by 2 because the original test was two-tailed. This is because in a two-tailed test, we are interested in deviations from the null hypothesis in both directions (positive and negative). However, in a left-tailed test, we are only interested in deviations in the negative direction. So, the p-value for the corresponding left-tailed test would be 0.0670 / 2 = 0.0335.
Explanation:
In statistical hypothesis testing, a p-value is the probability of obtaining a test statistic as extreme or more extreme than the observed one, assuming that the null hypothesis is true.
In a two-tailed test, the null hypothesis is that there is no significant difference between the sample mean and the population mean. The alternative hypothesis is that the sample mean is significantly different from the population mean, either larger or smaller.
In a left-tailed test, the null hypothesis is that the sample mean is not significantly smaller than the population mean. The alternative hypothesis is that the sample mean is significantly smaller than the population mean.
To find the p-value for the corresponding left-tailed test, we need to calculate the probability of observing a test statistic as extreme or more extreme than the observed one, assuming the null hypothesis is true.
Since the original p-value is 0.0670, we know that the probability of observing a test statistic as extreme or more extreme than the observed one in a two-tailed test is 0.0670. This means that the probability of observing a test statistic in the left tail of the distribution is half of the original p-value, since it corresponds to only one tail of the distribution.
Therefore, the p-value for the corresponding left-tailed test is 0.0670/2 = 0.0335.
In other words, if we were to conduct a left-tailed test with the same sample, population, and null hypothesis is value, and if the observed test statistic was as extreme or more extreme than the one observed in the original two-tailed test, the probability of obtaining such a result or a more extreme one would be 0.0335, assuming the null hypothesis is true.
Know more about the null hypothesis click here:
https://brainly.com/question/30461126
#SPJ11
Which would it be more accurate, calculating the energy converted every two minutes and adding these values or calculating the energy converted from the average power and total time
The more accurate method for calculating the total energy converted would be calculating the energy converted from the average power and total time.
To do this, follow these steps:
1. Determine the average power (in watts) during the given time period.
2. Calculate the total time (in seconds) of the conversion process.
3. Use the formula: Energy (in joules) = Average Power (in watts) x Total Time (in seconds).
This method provides a more accurate representation of the energy conversion as it takes into account the overall average power and time, rather than making multiple separate calculations and adding them together, which could result in potential discrepancies due to varying power levels throughout the process.
To know more about "Power" refer here:
https://brainly.com/question/13357691#
#SPJ
A rectangular steel bar has a 2.8 inch by 6 inch cross section. What is the moment of inertia, I, about it's weak axis?
The moment of inertia of the rectangular steel bar about its weak axis is 75.6 inches^4. The moment of inertia, I, of a rectangular steel bar about its weak axis can be calculated.
Using the formula
I = (1/12) * b * h^3,
where b is the width of the section and h is the height of the section. In this case, the width is 2.8 inches and the height is 6 inches.
Substituting the values in the formula, we get I = (1/12) * 2.8 * 6^3 = 75.6 inches^4. Therefore, the moment of inertia of the rectangular steel bar about its weak axis is 75.6 inches^4.
The moment of inertia is an important property of a section that determines its resistance to bending. It is commonly used in structural engineering to design beams and columns that can withstand the loads and stresses applied to them. Knowing the moment of inertia of a section helps engineers to calculate the deflection, stress, and strain in a structure under different loading conditions.
Learn more about rectangular here:
https://brainly.com/question/21308574
#SPJ11
which is better investment? a. $1200 at 9% simple interest per annum for 2 years. B. $1200 at 8% compound interest per annum for 2 years
Answer: Option B ($1200 at 8% compound interest per annum for 2 years) is a better investment.
Step-by-step explanation:
In option A, the interest is calculated on the principal amount only, which is known as simple interest.
Simple Interest Formula:
Simple Interest = (P × R × T) / 100
Where P is the principal amount, R is the rate of interest and T is the time period.
So, for option A:
P = $1200
R = 9%
T = 2 years
Simple Interest = (1200 × 9 × 2) / 100 = $216
Total Amount = Principal + Simple Interest = $1200 + $216 = $1416
In option B, the interest is calculated on the principal amount as well as the interest earned in previous years, which is known as compound interest.
Compound Interest Formula:
Total Amount = P (1 + R/100) ^n
Where P is the principal amount, R is the rate of interest and n is the number of years.
So, for option B:
P = $1200
R = 8%
n = 2 years
Total Amount = 1200 (1 + 8/100) ^2 = $1369.86
As we can see, option B yields a higher total amount compared to option A, so it is a better investment choice.
Two different 2-digit numbers are randomly chosen and multiplied together. What is the probability that the resulting product is even
To calculate the probability that the resulting product is even, we need to first determine the total number of possible outcomes. There are 90 two-digit numbers ranging from 10 to 99. If we choose two different numbers, there are a total of 90C2 (90 choose 2) possible combinations, which is equal to 4,005.
To calculate the number of even products, we need to consider the different scenarios. If one of the numbers is even, the product will also be even. There are 45 even numbers in the range from 10 to 99, so the number of even products that can be formed from an even number and an odd number is 45 x 45 = 2025.
If both numbers are odd, then the product will also be odd, and hence not even. There are 45 odd numbers in the range from 10 to 99, so the number of odd products that can be formed from an odd number and an odd number is 45 x 44 = 1980.
Therefore, the total number of even products that can be formed is 2025. The probability that the resulting product is even is then 2025/4005, which simplifies to 9/17, or approximately 0.5294. So, there is a 52.94% chance that the resulting product will be even.
To know more about probability visit:
https://brainly.com/question/29381779
#SPJ11
In a chemical blending problem, one of the constraints is that the amount of sulfur relative to total output produced of chemical X may not exceed 7%. In a linear programming model, we should express this constraint as
The constraint can then be written as: S ≤ 0.07 × T. This equation represents the constraint for the amount of sulfur in the chemical blend of X and can be incorporated into the linear programming model to ensure that the solution meets the given requirement.
The constraint can then be written as: S ≤ 0.07 × T, This equation represents the constraint for the amount of sulfur in the chemical blend of X and can be incorporated into the linear programming model to ensure that the solution meets the given requirement.
We are given that the amount of sulfur relative to the total output produced of chemical X may not exceed 7%. To express this constraint in a linear programming model, we can use the following equation:
Sulfur Content ≤ 0.07 × Total Output
Here, the "Sulfur Content" represents the total amount of sulfur present in the chemical blend, while "Total Output" refers to the total amount of chemical X produced. By setting the constraint to be less than or equal to 7% (0.07) of the total output, we are ensuring that the sulfur content does not exceed the given limit.
In a linear programming model, we usually use variables to represent quantities. Let S represent the Sulfur Content and T represent the Total Output. The constraint can then be written as:
S ≤ 0.07 × T
To learn more about equation click here
brainly.com/question/29657983
#SPJ11
Hi! I am confused about this question…. Can someone explain it to me please?
30 points
Answer:
20 tins
Step-by-step explanation:
Since EACH dog eats 3/5 of a tin each day, that means that 3/5 + 3/5 or 6/5 of a tin is eaten everyday. Now that we know the daily amount, multiply it by 16 to find the number of tins for 16 days:
16* 6/5 = 19.2. Since we have to find the number of least entire tins, we round up to 20 tins.
Jill scored 80 points on Test 1. She suggests that her missing score on Test 2 be replaced with her score on Test 1, 80 points. What do you think of this suggestion
Jill's suggestion to replace her missing score on Test 2 with her score on Test 1 is not a fair or accurate representation of her knowledge and abilities. Each test is designed to assess specific topics and skills, and by substituting one score for another, Jill is essentially cheating the system.
Moreover, the scores on Test 1 and Test 2 may not be comparable or of equal difficulty. Even if Jill performed well on Test 1, it does not guarantee that she would have performed equally well on Test 2. By suggesting this, Jill is also implying that she did not put in the effort to prepare for Test 2 and is not willing to accept the consequences of her actions.
Furthermore, allowing such a substitution sets a dangerous precedent and undermines the value and integrity of assessments. If students are allowed to substitute scores whenever they want, then the purpose of assessments is defeated, and there would be no way to accurately measure a student's knowledge or progress.
In conclusion, Jill's suggestion to replace her missing score on Test 2 with her score on Test 1 is not a viable solution. It is important to maintain the integrity of assessments and hold students accountable for their performance on each test.
Teachers should encourage their students to prepare thoroughly for each assessment and accept the outcomes, even if they are not what they had hoped for.
Know more about assessment here:
https://brainly.com/question/27724137
#SPJ11
Researcher Requires An Estimate For The Number Of Trout In A Lake. To This End, She Captures 50 Trout, Marks Each Fish, And Releases Them Into The Lake. Two Days Later She Returns To The Lake And Captures 80 Trout, Of Which 16 Are Marked. (A) Suppose That The Lake Contains N Trout. Find The Probability L(N) That 16 Trout Are Marked In A Sample Of 80. This problem has been solved!
Therefore, Assuming that approximately 20% of the lake's trout population was marked, we can estimate that the lake contains approximately 250 trout.
To find the probability L(N) that 16 trout are marked in a sample of 80, we need to use the hypergeometric distribution formula. The formula is P(X=k) = [C(M,k) * C(N-M,n-k)] / C(N,n), where M is the total number of trout in the lake, N is the number of trout in the sample (80), k is the number of marked trout in the sample (16), and n is the sample size (50). Plugging in the values, we get P(X=16) = [C(M,16) * C(M-50,34)] / C(M,80). We don't know the exact value of N, but we can estimate it using the fact that 16 out of 80 trout were marked, which means that approximately 20% of the lake's trout population was marked. Therefore, we can estimate that the lake contains approximately 250 trout (i.e., 50 / 0.2). Writing the main answer in 2 lines: The probability L(N) that 16 trout are marked in a sample of 80 can be estimated using the hypergeometric distribution formula.
Therefore, Assuming that approximately 20% of the lake's trout population was marked, we can estimate that the lake contains approximately 250 trout.
To know more about probability visit :
https://brainly.com/question/13604758
#SPJ11
How to do difference between fractions with regrouping and without regrouping with whole numbers fraction and without mixed number fractions
When working with fractions, it's important to know the difference between operations with and without regrouping, as well as how to handle whole number fractions and mixed numbers.
1. Without regrouping: To subtract fractions without regrouping, the denominators should be the same. For example, 5/6 - 3/6 = 2/6. In this case, simply subtract the numerators and keep the same denominator.
2. With regrouping: If you need to subtract fractions with regrouping, it often involves mixed numbers. For example, 2 3/4 - 1 1/2. First, make the fractions' denominators the same: 2 6/8 - 1 4/8. Next, regroup (borrow) 1 from the whole number, turning it into an 8/8 fraction: 1 14/8 - 1 4/8. Finally, subtract the fractions: 1 10/8. Simplify, if necessary.
3. Whole number fractions: Whole numbers can be expressed as fractions with a denominator of 1. For example, 3 = 3/1. This allows for easy comparison and operations with other fractions.
4. Mixed numbers: Mixed numbers consist of a whole number and a fraction, like 1 2/3. To perform operations with mixed numbers, it's often helpful to convert them into improper fractions, then proceed with the addition or subtraction.
Remember to always simplify your final answer and, when needed, convert improper fractions back to mixed numbers.
Visit here to learn more about whole number : https://brainly.com/question/29766862
#SPJ11
Find the probability that the number of people who say auto racing is their favorite sport is more than 37.
The probability of the number of people who say auto racing is their favorite sport being more than 37 can be calculated using statistical methods.
This would require information on the total number of people surveyed, the number of people who said auto racing is their favorite sport, and other relevant data.
Depending on the specific scenario, the probability could be estimated or calculated exactly.
However, without this information, it is not possible to provide a specific answer to the question.
Therefore, it is important to have all relevant information and data before calculating probabilities or making any conclusions about the likelihood of an event occurring.
learn more about probability here:brainly.com/question/30034780
#SPJ11
What calculations should I do to find the side lengths of the new rectangle?
The side lengths of the new triangle would be = 35⅖ and 15⅖.
How to calculate the new length of the rectangule?To calculate the new lengths the formula for scale factor should be used;
That is;
Scale factor = Bigger dimensions/smaller dimensions.
Scale factor = 2/5
Smaller dimension length = 35
Smaller dimension width = 15
The bigger dimension length = 35×⅖ = 35⅖
The bigger dimension width = 15×⅖ = 15⅖
Learn more about scale factor here:
https://brainly.com/question/28339205
#SPJ1
The length of one kind of fish is normally distributed. The average length is 2.5 inches, with a standard deviation of 0.4 inches. What is the probability that the average length of 100 randomly selected fishes is less than 2.4 inches
There is only a 0.62% chance that the average length will be less than 2.4 inches. Therefore, we can conclude that it is unlikely for the average length of 100 randomly selected fish to be less than 2.4 inches.
Use the central limit theorem, which states that the distribution of sample means will be approximately normal regardless of the distribution of the population, as long as the sample size is large enough.
In this case, we are given that the length of one kind of fish is normally distributed, with a mean of 2.5 inches and a standard deviation of 0.4 inches. We want to find the probability that the average length of 100 randomly selected fish is less than 2.4 inches.
To apply the central limit theorem, we need to calculate the mean and standard deviation of the sampling distribution of the sample mean. The mean of the sampling distribution will be equal to the population mean, which is 2.5 inches. The standard deviation of the sampling distribution can be calculated using the formula:
standard deviation = population standard deviation / square root of sample size
In this case, the population standard deviation is 0.4 inches, and the sample size is 100, so:
standard deviation = 0.4 / sqrt(100) = 0.04 inches
Now that we have the mean and standard deviation of the sampling distribution, we can use the z-score formula to find the probability of obtaining a sample mean of less than 2.4 inches:
z = (sample mean - population mean) / standard deviation
z = (2.4 - 2.5) / 0.04 = -2.5
Using a standard normal distribution table, we can find that the probability of obtaining a z-score of -2.5 or less is approximately 0.0062. This means that the probability of obtaining a sample mean of less than 2.4 inches is approximately 0.0062.
In other words, if we were to randomly select 100 fish from this population and calculate the average length, there is only a 0.62% chance that the average length would be less than 2.4 inches. Therefore, we can conclude that it is unlikely for the average length of 100 randomly selected fish to be less than 2.4 inches.
To learn more about standard deviation click here
brainly.com/question/23907081
#SPJ11
Find the gradient of the line 2x-3y=5 and convert to the gradient intercept form,y=Mx+c
Answer:
see explanation
Step-by-step explanation:
the equation of a line in gradient- intercept form is
y = mx + c ( m is the gradient and c the y- intercept )
given
2x - 3y = 5 ( subtract 2x from both sides )
- 3y = - 2x + 5 ( divide through by - 3 )
y = [tex]\frac{2}{3}[/tex] x - [tex]\frac{5}{3}[/tex] ← in gradient- intercept form
with gradient m = [tex]\frac{2}{3}[/tex]
Dr. Tremble sends out surveys to faculty at 57 randomly selected colleges to assess their perceptions of faculty harassment. This is an example of _____ research.
Dr. Tremble's study is an example of quantitative research. This type of research involves the use of numerical data and statistical analysis to draw conclusions about a population.
In Dr. Tremble's study, he used surveys to collect data on the perceptions of faculty harassment from a sample of 57 colleges. By randomly selecting these colleges, he aimed to obtain a representative sample of the population of all colleges in the United States.
Quantitative research is useful for testing hypotheses and identifying patterns or trends in large sets of data. In Dr. Tremble's study, he can use statistical techniques to analyze the survey results and draw conclusions about the prevalence and nature of faculty harassment in colleges. He can also use the data to identify any patterns or trends in the types of colleges or faculty members that experience harassment.
Overall, quantitative research allows researchers like Dr. Tremble to draw generalizable conclusions about a population based on a sample. This makes it a valuable tool for studying large groups and identifying patterns that may not be apparent from individual cases or small-scale studies.
To know more about quantitative research, refer to the link below:
https://brainly.com/question/30472457#
#SPJ11
How many pounds of a metal containing 20% nickel must be combined with 6 pounds of a metal containing 80% nickel to form an alloy containing 60% nickel
Let's denote the amount of the metal containing 20% nickel that needs to be combined as 'x' pounds.
The amount of nickel in the metal containing 20% nickel is 20% of 'x', which can be expressed as 0.2x pounds.
The amount of nickel in the metal containing 80% nickel is 80% of 6 pounds, which can be expressed as 0.8 * 6 = 4.8 pounds.
To form an alloy containing 60% nickel, the total amount of nickel in the alloy should be the sum of the nickel amounts in each metal. Therefore, we can set up the equation:
0.2x + 4.8 = 0.6(x + 6)
Simplifying and solving for 'x':
0.2x + 4.8 = 0.6x + 3.6
0.2x - 0.6x = 3.6 - 4.8
-0.4x = -1.2
x = -1.2 / -0.4
x = 3
Therefore, 3 pounds of the metal containing 20% nickel must be combined with 6 pounds of the metal containing 80% nickel to form an alloy containing 60% nickel.
To know more about nickel refer here
https://brainly.com/question/3039765#
#SPJ11
HELP FAST ILL GIVE BRANILYST!!
Answer:
a) Her reasoning is wrong because √50 does not simplify to 2√25, it simplifies to 5√2. With her thinking that √50 simplifies to 2√25, then this leads to her doing 2 * 5 which equals 10.
b) To estimate a square root, you have to find two square numbers that make the number lie in between the two squares. In this case we need to find two square numbers where one square number is smaller than 50 and the other one is bigger. You should have found the two square numbers to be 7 and 8 because 7² = 49 and 8² = 64. Now we divide 50 by either number, either 7 or 8. As we can't use a calculator it is easier to divide 50 by 8 than 7. 50/8 = 6.25 Now we find the average of 6.25 and 8 which is 14.25/2 = 7.125 7.125 rounded to the nearest tenth is 7.1 Therefore the answer for b is 7.1
Answer:
(a) √50 is not equal to 10.
√50 = √25√2 = 5√2
(b) √50 = 5√2 = 5(1.41) = 7.05 = 7.1
An angle measures 120° less than the measure of its supplementary angle. What is the measure of each angle?
This is IXL
A certain bridge arch is in the shape of half an ellipse 114 feet wide and 34.7 feet high. At what horizontal distance from the center of the arch is the height equal to 16.8 feet
PLEASE HELP
The table shows the length, in inches, of fish in a pond.
11 19 9 15
7 13 15 28
Determine if the data contains any outliers. If so, list the outliers.
There is an outlier at 28.
There is an outlier at 7.
There are outliers at 7 and 28.
There are no outliers.
From the given data which shows the length of fish in a pond, there is an outlier at 7.
Hence, the correct option is B.
To determine if the data contains any outliers, we can use the interquartile range (IQR) method. First, we need to find the median and the quartiles of the data set
Arrange the data in order 7, 9, 11, 13, 15, 15, 19, 28.
Median (Q2) = the middle value = 15.
Q1 (the first quartile) = the median of the lower half of the data set = 9.
Q3 (the third quartile) = the median of the upper half of the data set = 19.
Next, we can calculate the IQR as the difference between the third and first quartiles
IQR = Q3 - Q1 = 19 - 9 = 10.
Finally, we can identify any outliers as values that are more than 1.5 times the IQR above the third quartile or below the first quartile.
The upper outlier bound is Q3 + 1.5 x IQR = 19 + 1.5 x 10 = 34.
The lower outlier bound is Q1 - 1.5 x IQR = 9 - 1.5 x 10 = -6.
Since the minimum value in the data set is 7, which is greater than the lower outlier bound, we have an outlier at 7. The maximum value in the data set is 28, which is less than the upper outlier bound, so it is not an outlier.
Hence, the correct option is B.
To know more about outlier here
https://brainly.com/question/31174001
#SPJ1
At I Love Food restaurant, you can choose from 13 appetizers, 16 entrees and 4 desserts. How many three-course meals can you order
There are 832 different three-course meals that can be ordered at the I Love Food restaurant.
Since there are 13 appetizers to choose from, 16 entrees, and 4 desserts, the number of possible three-course meals is:
13 x 16 x 4 = 832
A food restaurant is a business establishment that specializes in preparing and serving food to customers. These restaurants may offer a variety of cuisines, from traditional and regional dishes to fusion and international flavors. They are typically divided into different categories based on their menus and service styles, such as fast food, casual dining, fine dining, or ethnic restaurants.
Food restaurants are designed to provide a comfortable and enjoyable dining experience for customers, often with attractive decor, seating arrangements, and music. They employ chefs, cooks, servers, and other staff who work together to prepare and serve high-quality food and drinks. Many food restaurants offer takeout or delivery services, allowing customers to enjoy their meals at home or on the go. Some restaurants also provide catering services for events, parties, and other special occasions.
To learn more about Food restaurants visit here:
brainly.com/question/3037907
#SPJ4
it is very urgent pleas healp me
Answer:
[tex]y = {(x - 2)}^{2} - 3[/tex]
[tex]y = {x}^{2} - 4x + 1[/tex]
b = -4 and c = 1
HELP PLEASE I NEED IT
family is building a firepit for their yard that is shaped like a rectangular prism. They would like for the firepit to have a volume of 93.6 ft3. If they already have the length measured at 7.8 feet and the height at 2 feet, what is the width needed to reach the desired volume?
83.8 feet
78 feet
12 feet
6 feet
Answer:
D
Step-by-step explanation:
93.6/2/7.8=6