Answer:
A stone floor feels very cold to bare feet in winter, but a carpet in the same room feels comfortably warm.This is because both the floor and the carpet have the same temperature as both are exposed to the same atmosphere. But the former conducts away the heat from the feet better than the carpet as the latter is a non-conductor. So the feet losing more heat, the floor appears cooler to the feet
Explanation:
Hope it may help you!!
Both actually have same temperature. Our feet are warm. Floor is conductor of heat while carpet is not. When we walk on floor, then floor takes away or conducts the heat from our feet, so we feel cold. While carpet doesn't do that, so we feel warm.
Erin said that when you are standing in front of a fire you are warm because you release the coolness of your body to the heat of the fire.
Chris said that when you are standing in front of a freezer with the door open you feel cool because the air from the freezer is being transferred to your body.
Who has made the accurate statement regarding heat transfer?
Both Erin and Chris are correct.
Erin is correct.
Chris is correct.
Neither Erin nor Chris are correct.
third down, chris is correct
Which nutrients are needed in soil in larger doses?
Mineral Nutrients
Macronutrients
Non-mineral Nutrients
Micronutrients
Answer:
The primary nutrients are nitrogen, phosphorus and potassium.
The intermediate nutrients are sulfur, magnesium, and calcium.
The remaining essential elements are the micronutrients and are required in very small quantities.
Answer:
The primary nutrients are nitrogen, phosphorus and potassium.
The intermediate nutrients are sulfur, magnesium, and calcium.
The remaining essential elements are the micronutrients and are required in very small quantities.
Explanation:
Hitungkan pecutan bagi blok di bawah: / Cal
(a)
m= 2 kg
F= 8.0 N
Answer:
Acceleration = 4 m/s²
Explanation:
Given the following data;
Force = 8 N
Mass = 2 kg
To find the acceleration of the block;
Newton's Second Law of Motion states that the acceleration of a physical object is directly proportional to the net force acting on the physical object and inversely proportional to its mass.
Mathematically, it is given by the formula;
[tex] Acceleration = \frac {Net \; force}{mass} [/tex]
Substituting into the formula, we have;
[tex] Acceleration = \frac {8}{2} [/tex]
Acceleration = 4 m/s²
The force of friction acting on a sliding crate is 223 N.
How much force must be applied to main- tain a constant velocity?
Answer:
Friction Opposes Motion of an Object.
Now
To get the Net force that Moves an Object and causes acceleration....You subtract the Frictional force
Net force = Pushing Force - Frictional Force
Recall
Net Force; F=Ma
Ma = P - Fr
Now the question asked for How Much force Must be applied to Maintain a Constant velocity.
In a Constant Velocity Motion... Acceleration do not change... Its Zero
So Putting this into the formula above
M(0) = P - Fr
0=P - Fr
Fr = P.
This means
That The force needed to keep this object Moving at Constant Velocity Must be equal to its Frictional Force
Since Frictional Force; Fr =223N
The Applied Force(Pushing Force) Must be equal to 223N too.
A current of 2.0A flows through a light bulb. What is the amount of charge flowing through the light bulb in 40 seconds?
Answer:
Quantity of charge = 80 Coulombs
Explanation:
Given the following data;
Current = 2 A
Time = 40 seconds
To find the amount of charge flowing through the light bulb;
Mathematically, the quantity of charge passing through a conductor is given by the formula;
Quantity of charge = current * time
Substituting into the formula, we have;
Quantity of charge = 2 * 40
Quantity of charge = 80 Coulombs
The objective of baseball is to OUTSCORE your opponent.
True or false
Help ?
Answer:
True
Explanation:
The team with the most points at the end of the game is the winner.
the train left weston and arrived at easton 3 hours and 30 minutes later the speed was 104 km per hour what was the total distance covered?
Answer:
104 times by 3.3
Explanation:
104 is the distance for 1 hour. So you need to multiply it by 3.3( because it's 3 hour and 30 minutes)
help me with the question b.
Answer:
a) The specific heat capacity means the amount of heat needed by a unit mass of a material to increase its temperature in one unit.
b) Liquid P - [tex]Q = 3840\,J[/tex], Liquid Q - [tex]Q = 5500\,J[/tex], Liquid R - [tex]Q = 7800\,J[/tex], Liquid S - [tex]Q = 2856\,J[/tex]
Explanation:
a) The specific heat capacity means the amount of heat needed by a unit mass of a material to increase its temperature in one unit.
b) Let suppose that heat transfer rates between liquids and surroundings are stable. The quantity of the heat released is determined by the following expression:
[tex]Q = m\cdot c\cdot (T_{r} - T_{f})[/tex] (1)
Where:
[tex]m[/tex] - Mass of the liquid, in kilograms.
[tex]c[/tex] - Specific heat capacity, in joules per kilogram-degree Celsius.
[tex]T_{r}[/tex] - Initial temperature of the sample, in degrees Celsius.
[tex]T_{f}[/tex] - Freezing point, in degrees Celsius.
Liquid P ([tex]m = 1\,kg[/tex], [tex]c = 160\,\frac{J}{kg\cdot ^{\circ}C}[/tex], [tex]T_{r} = 30\,^{\circ}C[/tex], [tex]T_{f} = 6\,^{\circ}C[/tex])
[tex]Q = (1\,kg)\cdot \left(160\,\frac{J}{kg\cdot ^{\circ}C} \right)\cdot (30\,^{\circ}C - 6\,^{\circ}C)[/tex]
[tex]Q = 3840\,J[/tex]
Liquid Q ([tex]m = 1\,kg[/tex], [tex]c = 220\,\frac{J}{kg\cdot ^{\circ}C}[/tex], [tex]T_{r} = 30\,^{\circ}C[/tex], [tex]T_{f} = 5\,^{\circ}C[/tex])
[tex]Q = (1\,kg)\cdot \left(220\,\frac{J}{kg\cdot ^{\circ}C} \right)\cdot (30\,^{\circ}C - 5\,^{\circ}C)[/tex]
[tex]Q = 5500\,J[/tex]
Liquid R ([tex]m = 1\,kg[/tex], [tex]c = 300\,\frac{J}{kg\cdot ^{\circ}C}[/tex], [tex]T_{r} = 30\,^{\circ}C[/tex], [tex]T_{f} = 4\,^{\circ}C[/tex])
[tex]Q = (1\,kg)\cdot \left(300\,\frac{J}{kg\cdot ^{\circ}C} \right)\cdot (30\,^{\circ}C - 4\,^{\circ}C)[/tex]
[tex]Q = 7800\,J[/tex]
Liquid S ([tex]m = 1\,kg[/tex], [tex]c = 102\,\frac{J}{kg\cdot ^{\circ}C}[/tex], [tex]T_{r} = 30\,^{\circ}C[/tex], [tex]T_{f} = 2\,^{\circ}C[/tex])
[tex]Q = (1\,kg)\cdot \left(102\,\frac{J}{kg\cdot ^{\circ}C} \right)\cdot (30\,^{\circ}C - 2\,^{\circ}C)[/tex]
[tex]Q = 2856\,J[/tex]
What is the force of gravity between Earth (6.0 × 1024 kilograms) and Venus (4.88 × 1024 kilograms)? The distance between the two planets is about 3.8 × 1010 meters. (The value of G is 6.673 × 10-11 newton meter2/kilogram2. The mass of Earth is 5.98 × 1024 kilograms.)
Answer:
ans: 13.53 × 10^17 Newton
what is importance of measurment in our daily life ?
Measurement tools improve the quality and quantity of our lives by making them easier and safer. The ability to precisely quantify physical qualities has arguably enormous survival value, providing humans with an adaptive, evolutionary advantage refined over thousands of years of natural selection.
#CarryOnLearning
A free-fall parachutist eventually reaches a top speed where air resistance prevents further acceleration. What name is given to this ‘top speed'?
The name given to it is "terminal velocity".
In reality, it isn't a velocity, and it doesn't happen in free-fall.
Go figure.
A pole-vaulter first converts kinetic energy into
a. thermal energy.
b. chemical energy. mechanical energy.
c. mechanical energy
d. elastic potential energy.
Answer:
d. elastic potential energy
Which of the following refers to friction that acts on an object that is not moving? O A. Kinetic friction O B. Inertia O c. Contact force O D. Static friction
HELP PLEASE!!
Answer:
D.STATIC FRICTION
Explanation:
Have a nice day
The diagram show three different types of walls that could be built in a house. Through which hall would the heat lost be maximum.
Answer:
the thin steel wall because that wall is so very to fast broke
Car B is being pushed by a force of 22000 N. If it has a mass of 1375 kg.,
what is the acceleration of this car?
Answer:
a = 16 m/s²
General Formulas and Concepts:
Dynamics
Newton's Law of Motions
Newton's 1st Law of Motion: An object at rest remains at rest and an object in motion stays in motion Newton's 2nd Law of Motion: F = ma (Force is equal to [constant] mass times acceleration) Newton's 3rd Law of Motion: For every action, there is an equal and opposite reactionExplanation:
Step 1: Define
Identify variables
[Given] F = 22000 N
[Given] m = 1375 kg
[Solve] a
Step 2: Find Acceleration
Substitute in variables [Newton's 2nd Law of Motion]: 22000 N = (1375 kg)aIsolate a: 16 m/s² = aRewrite: a = 16 m/s²Alcohol of mass 21g and density 0.7gcm-3 is mixed with 10g of water. Determine the density
of the mixture. (density of water = 1.0g cm-3)
Answer:
0.775 g/cm³
Explanation:
The given parameters are;
The mass of the alcohol = 21 g
The density of the of the alcohol = 0.7 g/cm³
The mass of water with whichit is mixed = 10 g
The density of water = 1.0 g/cm³
Therefore, the mass of the mixture, m = 21 g + 10 g = 31 g
Volume = Mass/Density
The volume of the alcohol = 21 g/(0.7 g/cm³) = 30 cm³
The volume of the water = 10 g/(1.0 g/cm³) = 10 cm³
Therefore, the volume of the mixture, V = 30 cm³ + 10 cm³ = 40 cm³
The density of the mixture, ρ = (Mass, m)/(Volume, V) = m/V
∴ ρ = (31 g)/(40 cm³) = 0.775 g/cm³
The density of the mixture, ρ = 0.775 g/cm³.
A young student drops a stone off the side of a cliff that is 41 meters high. How long does it take the stone to hit the ground below?
A)
2.89 s
B)
8.36 s
C)
3.20 s
D)
2.04 s
I need help answer these questions please
Answer:
1. 25 J
2. 250 J
3. 900,000 J
4. 7,500 J
Explanation:
1. The distance the wheelbarrow is tilted, d = 0.5 m
The force used to tilt the wheelbarrow, F = 50 N
The work done, W = F × d
∴ W = 50 N × 0.5 m = 25 J
2. Work done, W = Force × Distance
The applied force, F = 50 N
The distance the sand is moved, d = 5 m
∴ W = 50 N × 5 m = 250 J
3. The work done, W = The load lifted × The height to which the load is lifted
∴ W = 90,000 N × 10 m = 900,000 J
The work done, W = 900,000 J
4. The work output of the skateboard = The work input × Efficiency
Given that the skateboard is an ideal machine, we have;
The work output of the skateboard = The work input = W
W = F × d
F = 15 N, d = 500 m
∴ W = 15 N × 500 m = 7,500 J
The work output of the skateboard = W = 7,500 J.
Ball X has a mass of 8kg and is moving toward ball Y (which is sitting still) at 2m/s. After they collide, ball X is
sitting still. How fast is ball Y moving after the collision if it has a mass of 4kg?
Answer:
v = 4 m/s
Explanation:
Given :
Ball X :
Mass, m1 = 8kg ;
Initial Velocity, u1 = 2 m/s
Final velocity, v1 = 0
Ball Y:
Mass, m2 = 4kg ;
Initial Velocity, u2 = 0 m/s
Final velocity, v2 = v
(m1u1 + m2u2) = (m2v2 + m1v1)
(8*2 + 4*0) = (4*v + 4*0)
16 + 0 = 4v + 0
16 = 4v
v = 16 / 4
v = 4 m/s
Answer:
Explanation:
This is the Law of Momentum Conservation which for us looks like this:
[tex][m_xv_x+m_yv_y]_b=[m_xv_x+m_yv_y]_a[/tex] and that should look familiar to you if this is what you are doing in physics. Filling in our particular info:
[(8.0 × 2.0)+ (4.0 × 0.0)] = [(8.0 × 0.0) + (4.0v)] and
16 + 0 = 0 + 4.0v and
16 = 4.0v so
v = 4.0 in the direction of ball X
Explain hydraulic machine as force multiplier.
Answer:
The pressure on piston 1 is always equal to the pressure on piston 2. ... It is equal to the force on piston 1, multiplied by A2/A1. Hydraulic systems are called force multipliers for exactly this reason. A small force can be increased by using hydraulics
Explanation:
Radhe Radhe❤
The density of oil is 0.8 g/cm^3. What is the mass of 36 cm^3 of oil? + (1 Point) O 0.29 N O 28.09 28.8 g O 36.89
Answer:
density = mass/volume
density=0.8
volume=36
mass=?
0.8=mass/36
mass = 36x0.8=28.8g
How does an electric bulb work?
this is a class 6 question...
Answer:
Explanation:
When a light bulb connects to an electrical power supply, an electrical current flows from one metal contact to the other. As the current travels through the wires and the filament, the filament heats up to the point where it begins to emit photons, which are small packets of visible light.
Which statement describes how chemical formulas, such as H20, represent compounds?
Answer:
They show the elements that make up a compound.
They show the three-dimensional shape of a molecule.
They show the types of atoms that make up a molecule.
They show the number of each type of atom in a molecule.
Explanation:
❣️(◍Jess bregoli◍)❣️#keep learning!!
Three circuits diagrams are shown. Which statement about the circuit diagram is accurate?
Answer:
Circuits A and B are both series circuit.
Explanation:
In series combination, two resistors are connected with their ends to ends. The equivalent resistance in this case is given by :
[tex]R_s=R_1+R_2+...[/tex]
In circuit A both voltage (V) and R₁ are connected in series.
Similarly in circuit B, voltage (V), R₁ and R₂ are in series./
Hence, the correct option is (a).
15. You are watching a baseball game on television that 15
being broadcast from 4500 km away. The batter hits
the ball with a loud "crack" of the bat. A microphone
is located 22 m from the batter, and you are 2.0 m from
the television set. On a day when sound travels 343 m/s
in air, what is the minimum time it takes for you to hear
the crack of the bat after the batter hits the ball?
Answer:
t_total = 6.99 s
Explanation:
It asks us how long it takes to hear the sound, for this we must look for the time (t₁) it takes for the sound to reach the microphone, the time it takes for the video signal (t₂) to reach the television and the time (₃) it takes for the TV sound to reach us, so the total delay time is
t_total = t₁ + t₂ + t₂
we look for t1, it indicates that the distance x = 22m
v = x / t
t = x / v
t₁ = 22/343
t₁ = 6.41 10-2 s
time t₂
t₂ = 4500 103/3 108
t₂ = 1.5 10-5 s
time t₃
t₃ = 2/343
t₃ = 5.83 10⁻³
Total time is
t_total = t₁ + t₂ + t₃
t_total = 6.41 10⁻² + 1.5 10⁻⁵ + 0.583 10⁻²
t_total = 6.99 s
¿Cómo se presentan las cargas en la materia, en su estado natural y que no presentan campos eléctricos?
Answer: Se presentan en equilibrio a nivel atómico y/o molecular
Explanation: Sólo los iones presentan campo eléctrico pero no son estables en la naturaleza ya que tienden a encontrar al ion de carga opuesta con el cual equilibrar la carga. El estado de equilibrio de un cuerpo o materia se da al tener idéntica cantidad de electrones (-) que de protones (+)-
VI. A student attaches four drawing pins to a copper rod using candle wax as shown in the diagram
The rod is then heated continuously at one end and the pins fall off in the order 4, 3, 2, 1
Explanation:
[tex]C.) \: Conduction \: \\ \\ = > it \: is \: a \: process \: of \: transferring \: \\ \\ of \: heat \: from \: one \: object \: to \: another \\ \\ when \: they \: are \: in \: contact \: [/tex]
By the conduction process the heat reaches the pin.Option C is correct.
What is heat transfer?The term "heat transfer" refers to the movement of heat. The flow of heat across a system's boundary is due to a temperature differential between the system and its surroundings.
Conduction is the type of heat transfer occurs mainly in solid or by contact.In the given condition the rod is then heated continuously at one end and the pins fall off in the order 4, 3, 2, 1.
By the conduction process the heat reaches the pin.
Hence option C is correct.
To learn more about the heat transfer refer to the link;
https://brainly.com/question/13433948
#SPJ2
What is the difference between potential and kinetic types of energy? 1 pois
Answer:
Potential energy is energy that is stored in an object or system. It remains unaffected by the environment outside of the object or system. Kinetic energy is the energy of an object or a system's particles in motion.
Explanation:
A box at rest is in a state of equilibrium half way up on a ramp. The ramp has an incline of 42° . What is the force of static friction acting on the box if box has a gravitational force of 112.1 N ?
70 N
80 N
75 N
85 N
Answer:
the correct answer is 75 N
Explanation:
This is a translational balancing exercise, let's set a reference system with the x-axis in the direction of the plane and the y-axis perpendicular to the plane.
In this reference system the force to decompose is the weight
sin 42 = Wₓ / W
cos 42 = W_y / W
Wₓ = W sin 42
W_y = W cos 42
Wₓ = 112.1 sin 42 = 75.0 N
W_y = 112.1 cos 42 = 83.3 N
The expression for equilibrium on the x-axis is
Wₓ - fr = 0
fr = Wₓ
fr = 75.0 N
the correct answer is 75 N
You have recently been called to troubleshoot network connectivity problems at a user's workstation. You have found that the network cable runs across high-traffic areas on the floor, causing the cable to wear through and break. You have replaced the cable with a plenum-rated and shielded twisted pair cable. You would like to minimize the problem and prevent it from happening again.Which of the following will BEST protect the cable from further damage?A. Encase the cable in a protective shield and secure the cable to prevent it from slipping.B. Periodically check the cable for kinks and wear. Replace the cable when necessary.C. Run the cable through the ceiling area instead of across the floor.D. Run the cable under the carpet.
Answer:
C
Explanation:
Prevents further damage to the network cable.