As a candle burns, the size of the candle decreases, but the reading on the balance does not change. How would reading the scale change as the candle burns if the candle was not in a closed system​

Three stages make up an atoll's life cycle: the volcanic, barrier reef, and atoll stages.

The volcanic stage marks the beginning of an atoll's life cycle. A volcanic island is first formed by tectonic activity, such as volcanic eruptions. The formation of the primordial landmass by the deposition of lava and other volcanic materials is this stage's most significant characteristic for the three stages.

The volcanic island experiences subsidence and sinks below sea level during the barrier reef stage. The island begins to develop a bordering reef, and a lagoon forms between the reef and the main mass. The development of the barrier reef, which serves as a defense between the open ocean and the expanding lagoon, is the important feature of this stage.

Erosion and ongoing subsidence cause the volcanic island to totally submerge below sea level during the last stage, sometimes referred to as the atoll stage. What's left is a coral reef that surrounds a centre lagoon in a round or oval configuration. The construction of the atoll, which is characterised by the absence of a landmass and the existence of the coral reef and lagoon, is the most significant aspect of this stage.

Learn more about three stages here:

https://brainly.com/question/31424135

#SPJ11

False.The most likely location for an electron in the H2 molecule is not exactly halfway between the two hydrogen nuclei

Rather the electron density is concentrated around the internuclear axis, forming what is known as a bonding molecular orbital. This is the result of the constructive interference between the two atomic orbitals that combine to form the molecular orbital. The electron density is also spread out over a region that extends beyond the internuclear axis, forming what is known as the molecular orbital's "cloud" or "envelope".In the H2 molecule, the electrons are in molecular orbitals which are formed by the combination of the atomic orbitals of the two hydrogen atoms. The two electrons in the H2 molecule are most likely to be found in the bonding molecular orbital, which is lower in energy than the atomic orbitals from which it was formed. The bonding molecular orbital has a shape that is symmetrical around the line joining the two nuclei, which means that the electrons are most likely to be found between the two nuclei. Therefore, the statement "the most likely location for an electron in H2 is halfway between the two hydrogen nuclei" is true.

To know more about nuclei visit :

https://brainly.com/question/21796566

#SPJ11

The radioactive nuclide from each pair is:

a) 102 a 47
c) 81 275 90

In pair (102 a 47 vs. 189 47 bMg), the nuclide with atomic number 102 is known to be unstable and radioactive, while the nuclide with atomic number 189 is stable. This is because nuclides with atomic numbers higher than 83 tend to be unstable due to the large number of protons in the nucleus, which creates a strong repulsive force between them.

In pair (203 c vs. 81 275 90), the nuclide with atomic number 90 is known to be unstable and radioactive, while the nuclide with atomic number 81 is stable. This is because nuclides with atomic numbers higher than 82 tend to be unstable due to the large number of protons in the nucleus, which makes it difficult to maintain a stable ratio of neutrons to protons. Therefore, 81 275 90 is the radioactive nuclide in this pair.
To know more about atomic visit

https://brainly.com/question/1770619

#SPJ11

Answer:

Explanation:

2.4 Solvent. is the minimum amount of solvent (water) in ml required to recrystallize 5.2 grams of salicylic acid contaminated with 1.3% benzoic acid? compound solubility in water at 25c solubility in water at 100c salicylic acid 0.26 g/100ml 7.5 g/100ml benzoic acid 0.34g/100ml 5.6g/100 ml a. 1529 ml b. 792 ml c. 69 ml d. 93 ml e. 2000 ml 8. if the recrystallized material from question 7 is isolated by filtration at room temperature, calculate the expected % recovery of salicylic acid. a. 100 % b. 87 % c. 94 % d. 92 % e. 96 % 9. determine the amount of compound a that would be extracted into 8.0 ml of diethyl ether after one extraction of 7.00 g of compound a dissolved in 12.5 ml of water. the distribution coefficient (kd) of compound a in diethyl ether and water is 3.5. (2 pts) a. 4.83 g b. 4.97 g c. 3.96 g

The internal energy of the gas after the expansion is also U0.

In an ideal gas, the internal energy depends only on its temperature and is independent of the volume and pressure. Therefore, in this scenario, where the monatomic ideal gas expands to twice the volume while maintaining the same pressure, the internal energy remains unchanged.

The internal energy of an ideal gas is given by the equation U = (3/2) nRT, where n is the number of moles, R is the gas constant, and T is the temperature. Since the pressure remains constant during the expansion, according to the ideal gas law, PV = nRT, where P is the pressure and V is the volume.

When the volume doubles, the temperature and the number of moles remain constant. Since the pressure is constant, the internal energy, which is solely determined by temperature, remains unchanged. Therefore, the internal energy of the gas after the expansion is still U0, the same as it was before the expansion.

To learn more about ideal gas law click here

brainly.com/question/12624936

#SPJ11

1000 Watts of power was needed to lift the rock.

To calculate the work done on the rock, we use the formula:

Work = Force x Distance

In this case, the force applied to lift the rock is 100 N, and the distance lifted is 30 meters. Therefore, the work done on the rock is:

Work = 100 N x 30 m = 3000 Joules

So, 3000 Joules of work was done on the rock.

To calculate the power needed to lift the rock, we use the formula:

Power = Work / Time

The work done on the rock is 3000 Joules, and the time taken to lift the rock is 3 seconds. Therefore, the power needed to lift the rock is:

Power = 3000 Joules / 3 seconds = 1000 Watts

For more question on power click on

https://brainly.com/question/2248465

#SPJ11

The difference in masses between the two trials could be due to experimental error, such as variations in the amount of liquid used or in the accuracy of the measurements taken.

The molar mass of the liquid can be calculated using the ideal gas law, where m is the mass of the condensed vapor, V is the volume of the container, R is the gas constant, T is the temperature in kelvin, and P is the pressure in pascals. The molar masses calculated for each trial are:

Trial 1: M = (mRT/PV) = (1.97 g)(0.08206 L·atm/mol·K)(358 K)/(101.3 kPa)(0.01 L) = 32.0 g/mol

Trial 2: M = (mRT/PV) = (1.65 g)(0.08206 L·atm/mol·K)(358 K)/(98.7 kPa)(0.01 L) = 27.9 g/mol

Comparing the calculated molar masses to the known molar masses of methanol, acetone, and ethanol, the unknown liquid is most likely acetone (molar mass = 58.08 g/mol).

Learn more about molar mass here;

https://brainly.com/question/22997914

#SPJ11

The completion of the Haworth projection for the cyclic structure of D-mannose by laying down the Fischer projection is
            H_O       H
             |       |
       H_O--C--5-O--1--C--4-O_H
             |       |
            H--C--2-O_H H
                 |
                O_H

To complete the Haworth projection for the cyclic structure of D-mannose by laying down the Fischer projection, we first need to draw the Fischer projection of D-mannose.

The Fischer projection of D-mannose is:

       H
        |
   O_H--C--H
        |
   H_O--C--H
        |
   H--C--O_H
        |
       O_H

Now, to convert this Fischer projection into the Haworth projection, we need to follow these steps:

1. Determine the ring size: D-mannose forms a six-membered ring in solution.

2. Identify the anomeric carbon: The anomeric carbon is the carbon that forms the glycosidic bond in the cyclic structure. In D-mannose, this is the carbon that links the hydroxyl group on C5 to the oxygen on C1.

3. Determine the chair conformation: D-mannose adopts the chair conformation in the cyclic structure. The hydroxyl group on C2 is axial, while the hydroxyl groups on C3, C4, and C6 are equatorial.

4. Draw the Haworth projection: Based on the above information, we can draw the Haworth projection of D-mannose as follows:

            H_O       H
             |       |
       H_O--C--5-O--1--C--4-O_H
             |       |
            H--C--2-O_H H
                 |
                O_H

Learn more about Haworth projection: https://brainly.com/question/31819605

#SPJ11

The same amount of gaseous I2 would effuse from the container in approximately 83 seconds.

Effusion is the process by which a gaseous escapes through a small opening into a vacuum. It follows Graham's Law of Effusion, which states that the rate of effusion of a gas is inversely proportional to the square root of its molar mass.

The molar mass of nitrogen dioxide (N2O) is approximately 44 g/mol, while the molar mass of iodine (I2) is approximately 253.8 g/mol. Using this information, we can calculate the ratio of the square roots of their molar masses:

√(molar mass of N2O) / √(molar mass of I2) = √(44) / √(253.8) ≈ 0.333

The ratio indicates that gaseous I2 would effuse at about one-third the rate of N2O. Since N2O took 47 seconds to effuse, we can determine the time it would take for the same amount of gaseous I2 to effuse using the ratio:

Time for I2 to effuse = Time for N2O to effuse / (ratio) = 47 seconds / 0.333 ≈ 141 seconds ≈ 83 seconds (rounded to the nearest whole number).

Learn more about gaseous

brainly.com/question/28278190

#SPJ11

The hydronium ion concentration in this nitrous acid solution is approximately 0.0147 M.

To find the hydronium ion concentration of an aqueous solution of 0.539 M nitrous acid (HNO₂) with a Ka value of 4.50×10⁻⁴, you'll need to use the following equation:

Ka = [H₃O⁺][NO₂⁻] / [HNO₂]

Since the solution only contains nitrous acid initially, we can assume that the concentrations of H₃O⁺ and NO₂⁻ ions are the same at equilibrium (x).

Thus, the equation can be rewritten as:

4.50×10⁻⁴ = x² / (0.539 - x)

In most cases, x can be assumed to be small compared to the initial concentration (0.539 M), so the equation can be simplified as:

4.50×10⁻⁴ ≈ x² / 0.539

Solve for x (the hydronium ion concentration):

x ≈ √(4.50×10⁻⁴ × 0.539) ≈ 0.0147 M

Learn more about solution at

https://brainly.com/question/31970169

#SPJ11

The key points and tasks mentioned in the paragraph include selecting the limiting reagent, calculating the theoretical and obtained yield of isopentyl acetate, determining the percent yield, noting the boiling points of isopentyl acetate and isopentyl alcohol.

In the given paragraph, several points are mentioned related to the experiment involving isopentyl acetate.

The paragraph asks for the selection of the limiting reagent, calculation of the theoretical yield and obtained yield of isopentyl acetate, determination of the percent yield, boiling points of isopentyl acetate and isopentyl alcohol, and post-lab questions.

Additionally, it requests the upload of a picture showing the drawn separation scheme for isopentyl acetate from the reaction mixture.

These points are part of a lab experiment or assignment where students are expected to perform calculations, analyze results, and provide a separation scheme diagram.

Learn more about isopentyl acetate

brainly.com/question/29756493

#SPJ11

The rise velocity of a bubble, represented as vb, is influenced by various factors, including the diameter of the bubble (d), the density of the liquid (p), and its viscosity (u). However, two critical factors that significantly impact the rise velocity of a bubble are the acceleration due to gravity (g) and the density difference between the bubble and the fluid. The density difference is a result of the relative densities of the gas within the bubble and the liquid it is in. The acceleration due to gravity is a measure of the force of gravity on the bubble and affects its upward motion through the liquid. In summary, the rise velocity of a bubble is determined by the complex interplay of several factors, but the density difference and acceleration due to gravity are two of the most important.

learn more about acceleration due to gravity

https://brainly.in/question/29628267?referrer=searchResults

#SPJ11

The rise velocity of a bubble, represented as vb, is influenced by various factors, such as  the diameter of the bubble (d), the density of the liquid (p), and its viscosity (u).

The two critical factors that significantly impact the rise velocity of a bubble are

The relative densities of the gas inside the bubble and the liquid it is in are what cause the density difference.

The bubble's upward travel through the liquid is influenced by the acceleration caused by gravity, which is a measurement of the gravity's pull on the bubble.

In conclusion, a complicated interplay of various factors, including the density differential and the acceleration due to gravity, affects a bubble's ascent velocity.

learn more about acceleration due to gravity at:

https://brainly.com/question/12792214

#SPJ4

The standard cell potential for this battery is 1.64 V. This means that the battery will produce a voltage of 1.64 V when the reactions occur under standard conditions (1 atm pressure, 25°C temperature, and 1 M concentration of all species)

To calculate the standard cell potential for a battery based on the given reactions, we need to use the equation:

E°cell = E°cathode - E°anode

where E°cathode is the standard reduction potential of the cathode and E°anode is the standard reduction potential of the anode. The negative sign in front of the E°anode value is due to the fact that it is a reduction potential and we need to reverse the sign to get the oxidation potential.

So, in this case, we have:

E°cell = E°cathode - E°anode
E°cell = 1.50 V - (-0.14 V)
E°cell = 1.64 V

Therefore, the standard cell potential for this battery is 1.64 V. This means that the battery will produce a voltage of 1.64 V when the reactions occur under standard conditions (1 atm pressure, 25°C temperature, and 1 M concentration of all species).

To know more about cell potential, refer

https://brainly.com/question/19036092

#SPJ11

Resonance stabilization refers to the distribution of electrons within a molecule or ion due to the presence of multiple resonance structures. In the case of 4-nitrophenol, the nitro group (-NO₂) can donate its electron density to the phenol ring, creating a resonance structure where the negative charge is spread over both the oxygen atom and the adjacent carbon atom. This makes the conjugate base of 4-nitrophenol more stable and therefore more acidic than the conjugate base of phenol.

Now, when it comes to 3-nitrophenol, the nitro group is attached to a different carbon atom on the phenol ring. This means that the resonance stabilization of the conjugate base will be different. Specifically, the negative charge will be spread over the oxygen atom and a different carbon atom compared to 4-nitrophenol. Therefore, we cannot assume that 3-nitrophenol will be more or less acidic than 4-nitrophenol based solely on the presence of the nitro group. Instead, we would need to compare the relative stability of the two conjugate bases by drawing their resonance structures.

To draw the resonance structures for 3-nitrophenol, we can first deprotonate it to form the conjugate base. This will result in a negatively charged oxygen atom attached to the phenol ring. We can then move the double bond between the oxygen and the carbon atom adjacent to the nitro group to form a resonance structure where the negative charge is spread over the oxygen and the adjacent carbon. Finally, we can move the double bond between the carbon atom adjacent to the nitro group and the nitrogen atom of the nitro group to form a second resonance structure where the negative charge is spread over the oxygen and the nitrogen. These resonance structures are shown below:


By comparing the stability of the two conjugate bases (one from 3-nitrophenol and one from 4-nitrophenol) based on their respective resonance structures, we can determine which is more acidic. However, without knowing the pKa values for these compounds, we cannot make a definitive prediction about their relative acidity.

To know more about resonance structures, visit:

https://brainly.com/question/29547999

#SPJ11

To change the lengths of the sides of a triangle (7 cm, 4 cm, and 10 cm) so they form a right triangle, we need to modify the length of the longest side. By using the Pythagorean theorem, which states that in a right triangle, the square of the hypotenuse is equal to the sum of the squares of the other two sides, we can determine the new length. In this case, the new length of the longest side, rounded to the nearest tenth, is approximately 10.8 cm.

In a right triangle, the Pythagorean theorem can be used to relate the lengths of the sides. According to the theorem, in a right triangle with sides of lengths a, b, and c (where c is the hypotenuse, the side opposite the right angle), the following equation holds true: a^2 + b^2 = c^2.

In the given triangle, the longest side is 10 cm. To make the lengths form a right triangle, we need to modify the length of the longest side. Let's assume that the new length is x.

Using the Pythagorean theorem, we can set up the equation: 7^2 + 4^2 = x^2.

Simplifying the equation, we have 49 + 16 = x^2, which becomes 65 = x^2.

Taking the square root of both sides, we find that x ≈ 8.06.

Therefore, the new length of the longest side, rounded to the nearest tenth, is approximately 8.1 cm.

To learn more about Pythagorean theorem - brainly.com/question/14930619

#SPJ

The percent-by-mass concentration of KOH in the solution will be approximately 15.93%.

To find the percent-by-mass concentration of KOH in the solution, we need to calculate the mass of KOH and the total mass of the solution.

Mass of KOH = 18.0 g (given)

Mass of water = 95.0 g (given)

Total mass of the solution = Mass of KOH + Mass of water

= 18.0 g + 95.0 g

= 113.0 g

Now, we can calculate the percent-by-mass concentration of KOH

Percent-by-mass concentration of potassium hydroxide = (Mass of KOH / Total mass of the solution) × 100

Substituting the values;

Percent-by-mass concentration of KOH = (18.0 g / 113.0 g) × 100

≈ 15.93%

Therefore, the percent-by-mass will be 15.93%.

To know more about percent-by-mass here

https://brainly.com/question/14990953

#SPJ4

The answer is b and c. Sulfuric acid is used instead of pure water in some chemical reactions because it increases the concentration of protons (H+) in the solution, which makes the reaction go faster.

Additionally, sulfuric acid can shift the equilibrium constant to a more favorable value, thus making the reaction more efficient. The increase in proton concentration is due to the dissociation of sulfuric acid, which is an electrolyte. However, it is not a catalyst in most cases. Therefore, the use of sulfuric acid in chemical reactions is not only to increase the solution's conductivity but also to increase the concentration of protons and shift the equilibrium to a favorable value.

To know more about Sulfuric acid visit:

https://brainly.com/question/30039513

#SPJ11

The resulting nucleus is E. 66.

Element 88, with an atomic number of 88, undergoes a series of decays as follows:

1. 16 gamma decays: Gamma decay does not change the atomic number or mass number of an element, so the atomic number remains 88.

2. 8 Alpha decays: Alpha decay reduces the atomic number by 2 and the mass number by 4.

After 8 alpha decays, the atomic number becomes 88 - (8 * 2) = 72 and the mass number decreases by 32.

3. 4 negative beta decays: Negative beta decay increases the atomic number by 1, so after 4 negative beta decays, the atomic number becomes:

72 + 4 = 76.

4. 10 positive beta decays: Positive beta decay (also called beta plus decay or positron decay) decreases the atomic number by 1.

After 10 positive beta decays, the atomic number becomes:

76 - 10 = 66.

The resulting nucleus has an atomic number of 66. Therefore, the correct answer is option E.

know more about nucleus here:

https://brainly.com/question/141626

#SPJ11

The pH of the cathode compartment solution is 9.16, calculated using the Nernst equation and given concentrations and pressures.

To calculate the pH of the cathode compartment solution, we first use the Nernst equation, which relates cell potential (E), standard cell potential (E°), and concentrations/pressures of species.

In this case, the cell reaction involves Zn2+ ions and H2 gas.

By substituting the given values of cell emf (0.610 V), [Zn2+] (0.28 M), and p(H2) (0.92 atm), we can solve for the H+ ion concentration.

Once the H+ ion concentration is calculated, we use the formula pH = -log[H+] to determine the pH, which comes out to be approximately 9.16.

For more such questions on pressures, click on:

https://brainly.com/question/24719118

#SPJ11

The ph of the cathode compartment solution is 1.74.

The given problem involves the determination of pH of the cathode compartment solution using the measured cell emf. The cell emf measurement is based on the Nernst equation, which relates the cell potential to the concentration of the reactants and products in the cell. The Nernst equation is used to calculate the reduction potential of the cell, which is related to the pH of the cathode compartment solution. Using the given information on the concentration of Zn2+ ions and the partial pressure of H2 gas in the cathode compartment, we can calculate the reduction potential of the cell, and hence the pH of the cathode compartment solution. The final answer is obtained by substituting the calculated values into the Nernst equation.

Learn more about compartment solution here:

https://brainly.com/question/15185712

#SPJ11

To find out how much of the 18% alcohol solution and how much water must be mixed together to make 10 liters of a 12% alcohol solution, you can use the following steps:

Step 1: Set up the equation

Let x be the amount of 18% alcohol solution, and y be the amount of water to be mixed.

x + y = 10 (total solution volume)

0.18x + 0y = 0.12 * 10 (total alcohol content)

Step 2: Solve for y

y = 10 - x

Step 3: Substitute y in the second equation

0.18x + 0(10 - x) = 1.2

0.18x = 1.2

Step 4: Solve for x

x = 1.2 / 0.18

x = 6.67 liters (approximately)

Step 5: Solve for y

y = 10 - 6.67

y = 3.33 liters (approximately)

In conclusion, to make 10 liters of a 12% alcohol solution, the pharmacist needs to mix approximately 6.67 liters of the 18% alcohol solution with approximately 3.33 liters of water.

To know more about 18% alcohol solution refer here

https://brainly.com/question/14462663#

#SPJ11

When excess hydrogen iodide is added to 50.0 g of chromium (II) selenide, the mass of hydrogen selenide produced is 30.56 by using stoichiometry calculations.

To solve this problem, we need to use the balanced chemical equation and apply stoichiometry. The balanced equation for the reaction between hydrogen iodide (HI) and chromium (II) selenide (CrSe) is:

2 HI + CrSe → [tex]H_2Se[/tex]+ [tex]CrI_2[/tex]

From the equation, we can see that 2 moles of HI react with 1 mole of CrSe to produce 1 mole of [tex]H_2Se[/tex]. We'll start by calculating the number of moles of CrSe using its molar mass.

molar mass of CrSe = atomic mass of Cr + atomic mass of Se

= (52.0 g/mol) + (79.0 g/mol)

= 131.0 g/mol

moles of CrSe = mass of CrSe / molar mass of CrSe

= 50.0 g / 131.0 g/mol

= 0.382 moles

Since the reaction is 1:1 between CrSe and [tex]H_2Se[/tex], the moles of [tex]H_2Se[/tex]produced will be equal to the moles of CrSe. Therefore, the mass of [tex]H_2Se[/tex]can be calculated by multiplying the moles of CrSe by its molar mass.

mass of [tex]H_2Se[/tex]= moles of [tex]H_2Se[/tex]* molar mass of [tex]H_2Se[/tex]

= 0.382 moles * (80.0 g/mol)

= 30.56 g

Therefore, the mass of hydrogen selenide produced is 30.56 g.

Learn more about stoichiometry here:

https://brainly.com/question/28780091

#SPJ11

The loncapa computer weighing exactly pounds were completely annihilated and turned directly into energy, approximately 8.0768 × 10¹⁷ joules of energy would be released.

To determine the amount of energy that would be released if the loncapa computer weighing exactly pounds were completely annihilated and turned directly into energy, we need to use Einstein's equation E=mc².

Here, E represents the energy that would be released, m represents the mass of the computer, and c is the speed of light.

First, we need to convert the weight of the computer into kilograms, since the equation requires mass to be in kilograms.

1 pound = 0.45359237 kilograms

So, the mass of the computer would be:

m = ( pounds) x (0.45359237 kg/1 lb)

m =  kg

Now, we can use the equation:

E = mc²

E = ( kg) x (299,792,458 m/s)²

E =  kg x 8.98755178736818 × 10¹⁶ m²/s²

E = 8.07679660863197 × 10¹⁷ J

Therefore, if the loncapa computer weighing exactly pounds were completely annihilated and turned directly into energy, approximately 8.0768 × 10¹⁷ joules of energy would be released.

Learn more about Einstein's equation

brainly.com/question/10809666

#SPJ11

The hydrocarbon A is an alkene or an aromatic compound, as it decolorizes Br2 in CH2Cl2 and has a base peak in the EI mass spectrum at m/z = 67.

The dicarboxylic acid B is a cyclic succinic anhydride that can be resolved into enantiomers. The neutralization of 100.0 mg of B requires 13.7 mL of 0.100 M NaOH solution.

The given information suggests that A is a double bond or an aromatic compound, and it contains protons in the 1.8-2.2 ppm range in its proton NMR. The treatment of A with OsO4, periodic acid, and Ag2O yields a single enantiopure succinic anhydride B, indicating that A contains a symmetrical alkene or an aromatic ring.

The amount of NaOH required to neutralize 100.0 mg of B can be used to calculate the molar mass of B and determine its molecular formula. The formation of a cyclic anhydride upon treatment of B with POCl3 suggests that B is a dicarboxylic acid.

For more questions like Hydrocarbon click the link below:

https://brainly.com/question/31643106

#SPJ11

The root mean square (rms) speed of molecules of gas B is 200 m/s.

Given:

Temperature (T) = 600 K

RMS speed of gas A (vA) = 400 m/s

Mass of gas A (mA) = m

Mass of gas B (mB) = 4m (since molecule A has one-fourth the mass of molecule B)

The RMS speed of a gas is given by the equation:

v = √(3RT / m)

We can compare the RMS speeds of gases A and B using the equation above. Since both gases are at the same temperature, the ratio of their RMS speeds is equal to the square root of the ratio of their masses.

vA / vB = √(mB / mA)

Substituting the given values:

400 / vB = √(4m / m)

400 / vB = √4

400 / vB = 2

vB = 400 / 2 = 200 m/s

Therefore, the RMS speed of molecules of gas B is 200 m/s.

To know more about molecules, refer here:

https://brainly.com/question/30465503#

#SPJ4

[tex]CH_2Cl_2[/tex] has four electron groups around the central atom, [tex]SBr_2[/tex] has two, [tex]H_2S[/tex] has two, and [tex]PCl_3[/tex] has three.

To determine the number of electron groups around the central atom for each of the given molecules, we first need to identify the central atom in each.

In [tex]CH_2Cl_2[/tex], the central atom is carbon.

Carbon has four valence electrons and is bonded to two hydrogen atoms and two chlorine atoms.

Thus, there are four electron groups around carbon.

In [tex]SBr_2[/tex], the central atom is sulfur, which has six valence electrons.

It is bonded to two bromine atoms, which gives a total of two electron groups.

In [tex]H_2S[/tex], the central atom is sulfur, which has six valence electrons and is bonded to two hydrogen atoms, giving a total of two electron groups.

Finally, in [tex]PCl_3[/tex], the central atom is phosphorus, which has five valence electrons and is bonded to three chlorine atoms, giving a total of three electron groups.

For more such questions on electron, click on:

https://brainly.com/question/26084288

#SPJ11

The number of electron groups around the central atom for each of the given molecules are: CH2Cl2: 4 electron groups, SBr2: 2 electron groups, H2S: 2 electron groups and PCl3: 4 electron groups

In molecular geometry, electron groups refer to the regions of electron density around the central atom. The number of electron groups determines the molecular geometry of the molecule.

In CH2Cl2, the central carbon atom has four electron groups, which result in tetrahedral electron group geometry.

In SBr2, the central sulfur atom has two electron groups, which result in linear electron group geometry.

In H2S, the central sulfur atom has two electron groups, which result in bent electron group geometry.

In PCl3, the central phosphorus atom has four electron groups, which result in trigonal pyramidal electron group geometry.

The knowledge of electron group geometry is important to predict the molecular shape and bond angles of the molecule, which in turn determines the physical and chemical properties of the molecule.

Learn more about molecular geometry here :

https://brainly.com/question/31383201

#SPJ11

No, accurate prediction of the product requires knowledge of the reactants and their properties.

Without specific information about the reactants in the given reaction, it is not possible to accurately predict the product.

The provided answer choices do not provide sufficient context to determine the reaction or its products.

To predict the product of a chemical reaction, it is necessary to know the reactants and their specific properties, as well as the reaction conditions.

Without this information, it is not possible to provide a meaningful prediction.

Learn more about product

brainly.com/question/31815585

#SPJ11

 It is less polar than diethyl ether and is often used to extract slightly more polar compounds. It is not suitable for extracting polar compounds from aqueous solutions.

Ethanol is a polar solvent that is miscible with water, so it is typically used as an extraction layer for polar compounds from an aqueous solution. It is not suitable for extracting non-polar compounds from organic solutions.

Phosphoric acid is typically used as an acidic aqueous extraction layer to extract basic compounds from an aqueous solution. It is not suitable for extracting organic compounds.

Diethyl ether is an organic solvent that is commonly used as an extraction layer for non-polar compounds from organic solutions. It is not suitable for extracting polar compounds from aqueous solutions.

Dichloromethane is also an organic solvent that is commonly used as an extraction layer for non-polar compounds from organic solutions. However, it is less polar than diethyl ether and is often used to extract slightly more polar compounds. It is not suitable for extracting polar compounds from aqueous solutions.

Learn more about polar compounds

brainly.com/question/14752836

#SPJ11

An alcohol-in-glass thermometer works by using the principle that volume of a liquid changes with an increase in temperature. By using formula provided, we can calculate temperature and temperature at which alcohol column has a length of 22.95 cm is 84.39°C. Correct answer is option B

An alcohol-in-glass thermometer works on the principle that the volume of a liquid increases with an increase in temperature. In this type of thermometer, a small amount of alcohol is filled into a glass tube and sealed at both ends. As the temperature changes, the volume of the alcohol column changes and hence its length in the tube changes.

To calculate the temperature at which the alcohol column has a length of 15.10 cm, we can use the formula:
T = (L - L0) / (L100 - L0) x 100, where T is the temperature, L is the length of the alcohol column, L0 is the length of the alcohol column at 0.0°C, and L100 is the length of the alcohol column at 100.0°C.

Substituting the given values, we get:
T = (15.10 - 12.68) / (22.55 - 12.68) x 100
T = 57.02°C

Therefore, the temperature at which the alcohol column has a length of 15.10 cm is 57.02°C.
To calculate the temperature at which the alcohol column has a length of 22.95 cm, we can use the same formula:
T = (L - L0) / (L100 - L0) x 100

Substituting the given values, we get:
T = (22.95 - 12.68) / (22.55 - 12.68) x 100
T = 84.39°C

Therefore, the temperature at which the alcohol column has a length of 22.95 cm is 84.39°C. An alcohol-in-glass thermometer works by using the principle that the volume of a liquid changes with an increase in temperature. By using the formula provided, we can calculate the temperature of the thermometer for a given length of the alcohol column. Correct answer is option B

Know more about thermometer here:

https://brainly.com/question/24189042

#SPJ11

The final balanced redox equation is: MnO₄⁻ + SO₃²⁻ + 8H⁺ → Mn²⁺ + SO₄²⁻ + 4H₂O and the coefficient of H₂O when the equation is balanced using the set of smallest whole-number coefficients is 4.

To balance the equation, we need to follow the steps of balancing redox reactions in acidic solutions.

First, we assign oxidation numbers to each element to determine which atoms are being oxidized and reduced. We can see that manganese is being reduced from a +7 oxidation state in MnO₄⁻ to a +2 oxidation state in Mn²⁺, while sulfur is being oxidized from a +4 oxidation state in SO₃²⁻ to a +6 oxidation state in SO₄²⁻.

Next, we balance the number of atoms of each element on both sides of the equation. We start by balancing the elements that are not oxygen or hydrogen, which in this case is manganese. We add a coefficient of 1 in front of MnO₄⁻ and a coefficient of 1 in front of Mn²⁺.

Then, we balance the oxygen atoms by adding water molecules (H₂O) to the side of the equation that needs more oxygen. In this case, we need to add 4 water molecules to the right side to balance the oxygen atoms in the sulfate ion.

Next, we balance the hydrogen atoms by adding hydrogen ions (H⁺) to the side of the equation that needs more hydrogen. In this case, we need to add 8 hydrogen ions to the left side to balance the hydrogen atoms in the permanganate ion and the sulfite ion.

Finally, we balance the charges on both sides of the equation by adding electrons (e⁻). In this case, we need to add 5 electrons to the left side to balance the charges.

To know more about redox equation, refer here:

https://brainly.com/question/14029351#

#SPJ11

To solve this problem, we need to use the balanced chemical equation: Na + 3H2 → NaH + H2N. This equation tells us that 3 moles of H2 are required to consume 1 mole of N2.

First, we need to calculate the number of moles of N2 in 56 grams. The molar mass of N2 is 28 g/mol, so we have:
56 g N2 / 28 g/mol = 2 moles N2
Since 3 moles of H2 are required to consume 1 mole of N2, we need 6 moles of H2 to consume 2 moles of N2.
Now we can use the ideal gas law to calculate the volume of H2 required at the given temperature and pressure. The ideal gas law is:
PV = nRT
Where P is pressure, V is volume, n is the number of moles, R is the gas constant, and T is temperature.
We know that we need 6 moles of H2, and the temperature and pressure are given. The gas constant R is 0.0821 L*atm/(mol*K). Substituting in these values, we get:
V = nRT/P = (6 mol)(0.0821 L*atm/(mol*K))(300 K)/(3 atm) = 147.78 L
So we need 147.78 liters of H2 at a temperature of 300 K and 3 atm pressure to consume 56 grams of N2.

To know more about pressure visit:

https://brainly.com/question/12971272

#SPJ11