Answer:
[tex]Cu_2O[/tex]
Explanation:
Hello.
In this case, since the reaction obeys the law of conservation of mass, since the initial oxide had a mass of 0.500 g and yielded 0.444 g of copper, the mass of oxygen in the oxide is:
[tex]m_O=0.500g-0.444g=0.056g[/tex]
In such a way, we next compute the moles of copper and oxygen by using their atomic masses:
[tex]n_{Cu}=0.444g*\frac{1mol}{63.546 g} =0.00699mol\\\\n_O=0.056g*\frac{1mol}{16.00g}=0.0035mol[/tex]
Next, in order to compute the subscripts of Cu and O on the empirical formula we divide the moles by the fewest moles, in this 0.0035 mol as shown below:
[tex]Cu:\frac{0.00699}{0.0035} =2\\\\O:\frac{0.0035}{0.0035} =1[/tex]
It means that the empirical formula turns out:
[tex]Cu_2O[/tex]
Best regards!
2.
(3x – 4y = -10
(6x + 3y = –42
SOLUTION:
Answer:
Is like for solving for the solution for both equations??
Calculate the density of the aluminum cylinder with a diameter 0f 1.3 cm weighing 18 grams. Height of the cylinder is 5.2 Cm. Find percent error (Actual density of Aluminum is 2.7 g/cm3). (Formula for volume of cylinder is πr2h)
Answer:
Percent error = 3.7%
Explanation:
Given data:
Density of Al cylinder = ?
Weight of cylinder = 18 g
Diameter = 1.3 cm
Height = 5.2 cm
Actual density of Al = 2.7 g/cm³
Percent error = ?
Solution:
First of all we will calculate the volume of cylinder through given formula.
V = πr²h
r = diameter /2
V = 22/7 × (0.65 cm)²× 5.2 cm
V = 22/7 × 0.4225cm²× 5.2 cm
V = 6.89 cm³
Now we will calculate the density.
d = m/v
d = 18 g/ 6.89 cm³
d = 2.6 g/cm³
Percent error:
Percent error = measured value - actual value /actual value × 100
Percent error = 2.6g/cm³ - 2.7g/cm³ /2.7g/cm³ × 100
Percent error = 3.7%
Negative sign shows that measured or experimental value is less than actual value.
The natural abundance for boron isotopes is 19.9% 10B and 80.1%
11B Calculate boron's atomic mass.
Answer:
10.801 amu
Explanation:
From the question given above, the following data were obtained:
Isotope A (¹⁰B):
Mass of A = 10
Abundance (A%) = 19.9%
Isotope B (¹¹B):
Mass of B = 11
Abundance (B%) = 80.1%
Atomic mass of Boron =?
The atomic mass of boron can be obtained as illustrated below:
Atomic mass = [(Mass of A × A%)/100] + [(Mass of B × B%)/100]
= [(10 × 19.9)/100] + [(11 × 80.1)/100]
= 1.99 + 8.811
= 10.801 amu
Thus, the atomic mass of boron is 10.801 amu
The atomic mass of boron with natural abundance of 19.9% of 10 B and 80.1% of 11 B is 10.801 amu
Boron has 2 isotopes.
First isotopes
mass = 10
% abundance = 19.9%
Second Isotopes
mass = 11
% abundance = 80.1%
Therefore,
Atomic mass = (19.9% of 10) + (80.1% of 11)
Atomic mass = (19.9 / 100 × 10) + (80.1 / 100 × 11)
Atomic mass = 199 / 100 + 881.1 / 100
Atomic mass = 1.99 + 8.811
Atomic mass = 10.801
Atomic mass = 10.801 amu
read more: https://brainly.com/question/14440832?referrer=searchResults
calculate the equilibrium concentration for the nonionized bases and all ions in a solution that is 0.25M
Answer:
The equilibrium concentration of [CH₃NH₂] = 0.23965 M.
The equilibrium concentration of CH₃NH₃⁺ and OH⁻ = 0.01035 M respectively.
Explanation:
The first step is to write out the dissociation reaction. Therefore, the equation showing the dissociation is given as below;
CH₃NH₂ + H₂0 <--------------------------------------------------------> CH₃NH₃⁺ + OH⁻.
Kindly note that ''<----------->'' arrow shows that the reaction is an equilibrium reaction.
Therefore, at the start of the reaction [that is time, t =0], we have that the concentration of CH₃NH₂ = 0.25M, thus, the concentration of CH₃NH₃⁺ and OH⁻ is zero respectively at this time, t =0.
At equilibrium, the concentration of CH₃NH₂ = 0.25M - x, thus, the concentration of CH₃NH₃⁺ and OH⁻ is x respectively.
Therefore, kb = 4.47 × 10-4 = [CH₃NH₃⁺ ][OH⁻]/[CH₃NH₂]. Hence, slotting in the values into this equilibrium equation showing the relationship between kb and concentration of the species involved, we have that;
kb = 4.47 × 10⁻⁴ = x² /0.25 - x.
x² + 4.47 × 10⁻⁴x - 1.1175 × 10⁻⁴ = 0.
Solving this quadratic equation gives us the value of x as 0.01035 M.
Thus, the concentration of [CH₃NH₂] = 0.25 M - 0.01035 M = 0.23965 M
The equilibrium concentration of [CH₃NH₂] = 0.23965 M.
The equilibrium concentration of CH₃NH₃⁺ and OH⁻ = 0.01035 M respectively.
why is steel a mixture
Answer:
Steel is a mixture because iron does not mix with the carbon and the other components.
Answer:
Steel is a mixture because it does not have a set chemical compound formula. It's a mixture of iron and carbon fused together with other metals or nonmetals to create a mixture.
Explanation:
Steel is an alloy , a solid solution
Steel is a homogenous mixture. It is not a pure substance because it is made form more than one component.
Which of these would be classified as a chemical property that could be measured quantitatively?
Volume
Flammability
рн
Solubility
Answer:
рн
Explanation:
From the given choices, pH is the only chemical property that can be measured quantitatively.
A chemical property is one that tells us about what a substance can do as regards to whether or not the substance reacts with other substances.
Examples are flammability, rusting of iron, precipitation, decomposition of water e.t.c
pH is the degree of acidity or alkanility of a solution. It is usually determined quantitatively using a pH scaleThe scale is graduated from 1 to 14 1 to 7 is for acids7 is for neutral compounds7-14 is for alkalines.the half life of I -137 is 8.07 days. if 24 grams are left after 40.35 days, how many grams were in the original sample?
Answer:
768g
Explanation:
We can use to formula [tex]N(A) = N_0(\frac{1}{2})^\frac{t}{t_{1/2}}[/tex] . Here, N(A) is the final amount. N0 is the initial amount. t is the time elapsed, and [tex]t_{1/2}[/tex] is the half life. Plugging in, we get the answer above.
The half life of I -137 is 8.07 days. if 24 grams are left after 40.35 days, 800 gram were in the original sample.
What is half life?The half-life (symbol t12) is the amount of time it takes for a volume (of material) to be reduced to half of its original value. In nuclear physics, the phrase is typically used to indicate how rapidly unstable atoms experience radioactive decay or even how long stable nuclei survive.
The phrase is sometimes used more broadly to describe any form of exponential (or, in rare cases, non-exponential) decay. The biological ½ of medications and other compounds in the human body, for example, is referred to in the medical sciences. In exponential growth, the inverse of half-life is doubling time.
ln P = kt + C
P = amount of I-137 at time t
C = constant
k = 1/time
t = time
1st condition:
P = Po, t = 0 days
2nd condition: (half-life)
P = 0.5Po, t = 8.07 days
3rd condition:
P = 25 grams, t = 40.35 days
Po = 800 grams
mass of I-137 = 800 gram
Therefore, 800 gram were in the original sample.
To learn more about half life, here:
https://brainly.com/question/23485913
#SPJ6
The radius of Pt atom in an fcc structure is 0.1386 nm. Pt has atomic mass of 195.09 g/mol. Calculate the density of this fcc structure. The Avogadro’s number NAis 6.022 x 1023 per mole
Answer:
21.51g/cm³
Explanation:
To answer this question we need to know that, in 1 unit FCC cell:
Edge length = √8 * R
Volume = 8√8 * R³
And there are 4 atoms per unit cell
The mass of the 4 atoms of the cell, in grams, is:
4 atom * (1mol / 6.022x10²³atom) * (195.09g / mol) = 1.2958x10⁻²¹g
Volume in cm³:
0.1386nm * (1x10⁻⁷cm / 1nm) = 1.386x10⁻⁸cm
Volume = 8√8 * (1.386x10⁻⁸cm)³
Volume = 6.02455x10⁻²³cm³
And density, the ratio of mass and volume, is:
1.2958x10⁻²¹g / 6.02455x10⁻²³cm³ =
21.51g/cm³
Determine the molar mass of CaO
Answer each of the following questions with increases, decreases, or does not change.
a) If the intermolecular forces in a liquid increase, the normal boiling point of the liquid increases .
b) If the intermolecular forces in a liquid increase, the vapor pressure of the liquid does not change .
c) If the surface area of a liquid increases, the vapor pressure increases .
d) If the temperature of a liquid decreases, the equilibrium vapor pressure increases .
Drag and drop your selection from the following list to complete the answer:
does not change decreases increases
Answer:
1) Increases
2) decreases
3) increases
4) decreases
Explanation:
When the intermolecular forces in a liquid increases, the greater vapour pressure of the liquid decreases accordingly.
Since the vapour pressure is proportional to temperature, as temperature increases, the vapour pressure increases alongside.
As intermolecular forces increases, the boiling point increases accordingly since more energy is required to break intermolecular bonds.
Lastly, the greater the surface area, tell greater the vapour pressure since more liquid surface area is now available.
How many grams of H3PO4 would be needed to produce 25.0 grams of H2O?
Answer:
653 gH³PO⁴
Explanation:
We'll first write the chemical equation for this reaction:
P
4
O
10
(
s
)
+
6
H
2
O
(
l
)
→
4
H
3
PO
4
(
a
q
)
Let's now find the relative number of moles of phosphoric acid (
H
3
PO
4
) using the coefficients of the equation, and the fact that
10.0
mol H
2
O
react:
10.0
mol H
2
O
(
4
l
mol H
3
PO
4
6
mol H
2
O
)
=
6.67
mol H
3
PO
4
Now, using the molar mass of
H
3
PO
4
(calculated to be
98.00
g/mol
), let's find the theoretical mass of phosphoric acid produced:
6.67
l
mol H
3
PO
4
(
98.00
l
g H
3
PO
4
1
mol H
3
PO
4
)
=
653
mol H
3
PO
4
Thus, if the reaction goes to completion, there will be a yield of
653
grams of phosphoric acid
Thank me later
Mark me as brainliest please for my answer
Predict which of the following metals reacts with hydrochloric acid.
Check all that apply.
-Sn
-Hg
-Cr
-Ni
Answer:
Pb, Cr, Fe
Explanation:
The metals that can react with hydrochloric acid are; Sn, Cr and Ni.
The electrochemical series shows the reactivity of elements. An element can only replace another element in solution when that element is higher in the electrochemical series.
The metals that can replace hydrogen in a solution of hydrochloric acid must be metals that are above hydrogen in the electrochemical series. These metals are; Sn, Cr and Ni. Hg is a noble metal hence it does not replace hydrogen in an acid solution.
Learn more: https://brainly.com/question/25249351
The reaction between HCl and KOH results in an increase in temperature in the solution. Select the correct statement from the list below.
a) this is an endothermic reaction
b) this is a phase change reaction
c) this is a vaporization reaction
d) this is an exothermic reaction
Answer:
d) this is an exothermic reaction.
Explanation:
The reaction between HCl and KOH results in an increase in temperature in the solution. Select the correct statement from the list below.
a) this is an endothermic reaction . NO. This would cause a decrease in the temperature of the solution.
b) this is a phase change reaction . NO. All the species remain in the aqueous phase.
c) this is a vaporization reaction . NO. All the species remain in the aqueous phase.
d) this is an exothermic reaction. YES. The reaction releases heat, so it is exothermic.
Which of the following represents a species with 16 protons and 18 electrons? A) Ar B) S C) S²⁻ D) Si⁴⁻ E) S²⁺ Question 5 of 40
Answer:S²⁻
Explanation:
Sulphur is in group 16. The atomic number of sulphur is 16.
However, sulphur can accept two electrons to form the sulphide ion S²⁻ which contains 18 electrons, hence the answer provided above.
Please help!!
This is a big part of my grade -----
Will make you brainliest******
Explanation:
U need to draw the graph first and make a line at 17 pennies, where the line of 17 pennies and your graph meet is the mass of it(at y axis)
Compute the values of the diffusion coefficients for the interdiffusion of carbon in both α-iron (BCC) and γ-iron (FCC) at 900°C. Which is larger? Explain why this is the case.
Answer:
α-iron (BCC) has faster diffusion rate because of lower values in activation energy and pre-exponential value.
Explanation:
Taking each parameters or data at a time, we can determine the values/a constant for each parameters in the diffusion coefficient equation.
For α-iron (BCC), the diffusion coefficient = pre-exponential value,Ao × e^( -Activation energy,AE)/gas constant,R × Temperature.
Converting the given Temperature, that is 900°C to Kelvin which is equals to 1173.15K.
For α-iron (BCC), the pre-exponential value, Ao = 1.1 × 10^-6, and the activation energy, AE = 87400.
Thus, we have that the diffusion coefficient = 1.1 × 10^-6 × e(-87400)/1173.15 × 8.31.
Diffusion coefficient for α-iron (BCC) = 1.41 × 10^-10 m^2/s.
Also, For the γ-iron (FCC), the pre-exponential value, Ao = 2.3 × 10^-5 and the activation energy, AE = 148,00.
From these values we can see that both the exponential value, Ao and the activation energy for γ-iron (FCC) are higher than that of α-iron (BCC).
Thus, the diffusion coefficient for the γ-iron (FCC) = 2.3 × 10^-5 × e ^-(14800)/8.31 × 1173.15.
Then, the diffusion coefficient for the γ-iron (FCC) = 5.87 × 10^-12 m2/s.
Therefore, there will be faster diffusion in α-iron (BCC) because of lower activation energy and vice versa.
Match the following terms and definitions.
1. major ecological grouping of plants and animals
food chain
biome
environmental factor
decomposers
2. bacteria and fungi that break down dead matter
a state of change in which the end result is equal or
3.
balanced
the basic relationships that show how a community of plants,
animals, and bacteria live and grow and how these living
4. things are dependent on each other as well as the Sun, soil,
and other nonliving parts of their environment; a cycle of
relationships
line of plants and animals that shows the order in which
5.
organisms are eaten
a condition or conditions of the nonliving surroundings, such
6.
as light, temperature, water, and so on
ecosystem
dynamic equilibrium
Answer:
major ecological grouping of plants and animals
food chain
*biome*
bacteria and fungi that break down dead matter
*decomposers*
a state of change in which the end result is equal or
balanced
*dynamic equilibrium*
the basic relationships that show how a community of plants,
animals, and bacteria live and grow and how these living
*ecosystem*
things are dependent on each other as well as the Sun, soil,
and other nonliving parts of their environment; a cycle of
relationships
line of plants and animals that shows the order in which
*Food chain*
organisms are eaten
a condition or conditions of the nonliving surroundings, such
*environmental factor*
Explanation:
Identifying the particles of an atom
Answer:
6 protons 8 neutrons 5 electrons
Explanation:
protons are blue neutrons are red electrons are green
1. Marisa determined the melting point of a substance to be 24.5C. Find the percent error of her measurement if the actual melting point is 31.2C.
Answer:
[tex]\%\ Error = 21.5\%[/tex]
Explanation:
Given
[tex]Measured = 24.5[/tex]
[tex]Actual = 31.2[/tex]
Required
Determine the percentage error
First, we need to determine the difference in the measurement
[tex]Difference = |Actual - Measured|[/tex]
[tex]Difference = |31.2 - 24.5|[/tex]
[tex]Difference = |6.7|[/tex]
[tex]Difference = 6.7[/tex]
The percentage error is calculated as thus:
[tex]\%\ Error = \frac{Difference * 100\%}{Actual}[/tex]
[tex]\%\ Error = \frac{6.7 * 100\%}{31.2}[/tex]
[tex]\%\ Error = \frac{670\%}{31.2}[/tex]
[tex]\%\ Error = 21.4743589744\%[/tex]
[tex]\%\ Error = 21.5\%[/tex] approximated
What are graphs? Give an example of a graph that would be useful to you in your everyday life
Answer:
A graph can be very handy in collecting data and storing it in one place. A graph can be a very effective tool in presenting visual information rather swiftly. Hope this helps! I am learning about graphs in my course!
Explanation:
Answer:
graph) a diagram showing the relation between variable quantities, typically of two variables, each measured along one of a pair of axes at right angles.
Explanation:
Graphing is used daily. From stockbrokers to performance evaluation in companies. All use them to boost sales and meet deadlines. Even simple calculations can be assessed better by using a graph.
(let me know if this helps?)
PLEASE HELP AND FAST!!!
A 57.07 g sample of a substance is initially at 24.3°C. After absorbing of 2911 J of heat, the temperature of the substance is 116.9 CWhat is the specific heat (SH) of the substance?
Answer:
Approximately [tex]0.551\; \rm J\cdot kg^{-1} \cdot \left(^\circ\! C \right)^{-1}[/tex].
Explanation:
The specific heat of a material is the amount of energy required to increase unit mass (one gram) of this material by unit temperature (one degree Celsius.)
Calculate the increase in the temperature of this sample:
[tex]\Delta T = (116.9 - 24.3)\; \rm ^\circ\! C= 92.6\; \rm ^\circ\! C[/tex].
The energy that this sample absorbed should be proportional the increase in its temperature (assuming that no phase change is involved.)
It took [tex]2911\; \rm J[/tex] of energy to raise the temperature of this sample by [tex]\Delta T = 92.6\; \rm ^\circ\! C[/tex]. Therefore, raising the temperature of this sample by [tex]1\; \rm ^\circ\! C[/tex] (unit temperature) would take only [tex]\displaystyle \frac{1}{92.6}[/tex] as much energy. That corresponds to approximately [tex]31.436\; \rm J[/tex] of energy.
On the other hand, the energy required to raise the temperature of this material by [tex]1\; \rm ^\circ\! C[/tex] is proportional to the mass of the sample (also assuming no phase change.)
It took approximately [tex]31.436\; \rm J[/tex] of energy to raise the temperature of [tex]57.07\; \rm g[/tex] of this material by [tex]1\; \rm ^\circ C[/tex]. Therefore, it would take only [tex]\displaystyle \frac{1}{57.07}[/tex] as much energy to raise the temperature of [tex]1\; \rm g[/tex] (unit mass) of this material by [tex]1\; \rm ^\circ \! C\![/tex]. That corresponds to approximately [tex]0.551\; \rm J[/tex] of energy.
In other words, it takes approximately [tex]0.551\; \rm J[/tex] to raise [tex]1\; \rm g[/tex] (unit mass) of this material by [tex]1\; \rm ^\circ \! C[/tex]. Therefore, by definition, the specific heat of this material would be approximately [tex]0.551\; \rm J\cdot kg^{-1} \cdot \left(^\circ\! C \right)^{-1}[/tex].
which element Shows very similar chemical properties to barium?
What is the mass/volume percent of a solution with 7.5g of Na2CO3 dissolved in 20.0 g of water?
9.3 %
27%
7.5%
Answer:
7.5%
Explanation:
I just know it's that
plsss help!!!!! I'll give u brainlest and 10 points
Answer:
I would say it is true
Explanation:
Look at the image HOH. What does this image represent?
Answer:
Formation of covalent bond structures. The image is essentially a Lewis dot structure.
The image of HOH has depicted the covalent bond formation in water. Thus, option B is correct.
The image has been the Lewis structure of the water molecule. It has been consisted of two hydrogen atoms bonded to oxygen molecules.
The oxygen has a presence of 4 dots that have been the representation of the valence electrons. Thus, oxygen has been consisted of 2 lone pairs.
The water molecule has the presence of shared electrons between hydrogen and oxygen. The bond formed by the sharing of electrons has been covalent.
Thus, the image of HOH has been the representation of the formation of covalent bonds in water. Thus, option B is correct.
For more information about Lewis structure, refer to the link:
https://brainly.com/question/4144781
Determine the mass (in grams) of NaCl in 294 grams of a 24.1% (m/m) NaCl solution. Be sure to report to the correct number of significant figures with no units.
I NEED HELP WITH THIS URGENTLY!!!!!
Answer:
70.9 grams 3 sig figs
Explanation:
24.1% of 294 grams = 0.241(294 gram) = 70.854 grams ≅ 70.9 grams 3 sig figs
How many moles are in 141.16 grams of F?
Use two digits past the decimal for all values
Answer: 2681.81
Explanation:
What is the force of a 10 kg bowling ball with an acceleration of 8 m/s/s?
0 18 N
0 80 N
O 2N
The answer is 80N
(hope this helps you!!!)
Which item has the most thermal energy?
A. 1 kg boiling water
B. 1 kg ice
C. 1 kg hot water just below the boiling point
D. 1 kg cold water
Answer:
1L of hot water just below the Boling point
Explanation:
asking questions is best to learn please ask more questions
Answer:
its 1kg of boiling water
Explanation: