Answer:
C. Law Of Conservation Of Mass
Explanation:
In this scenario, this would occur due and is explained by the Law of Conservation of Mass. This law basically states that the mass that exists during and after a chemical reaction must remain the same, assuming that the reaction is taking place in a closed environment where no loss of mass is occurring. This means that if the reaction is in a closed environment the mass should not change whatsoever even if it is not in the same form or substance as it was before the reaction occurred.
Where are streams located?
Answer:
Larger seasonal streams are more common in dry areas. Rain-dependent streams (ephemeral) flow only after precipitation. Runoff from rainfall is the primary source of water for these streams. Like seasonal streams, they can be found anywhere but are most prevalent in arid areas.
Explanation:
Mention the relation between horsepower and watt.
What is the fullform of amu ?
Answer:
a power level of 1 hp is approximately equivalent to 746 watts or 0.746kilowatts by 746. To convert from watts to horsepower, multiply by 0.00134. To convert from horsepower to kilowatt, multiply by 0.746
An ant is crawling along a yardstick that is pointed with the 0-inch mark to the east and the 36-inch mark to the west. It starts at the 14-inch mark, crawls to the 20-inch mark, then moves to the 16-inch mark. What was the total distance the ant traveled?
Given :
An ant is crawling along a yardstick that is pointed with the 0-inch mark to the east and the 36-inch mark to the west.
It starts at the 14-inch mark, crawls to the 20-inch mark, then moves to the 16-inch mark.
To Find :
The total distance the ant traveled.
Solution :
Total distance travelled by ant = (distance between 14 and 20 inch mark) +
(distance between 20 and 16 inch mark)
Total distance = (20-14 ) + ( 20-16) = 6 + 4 = 10 inch.
Therefore, total distance the ant traveled is 10 inch.
Hence, this is the required solution.
Molten (melted) iron and carbon monoxide are produced in a blast furnace by the reaction of iron(III) oxide and pure carbon. Fe2O3 + 3C ---> 2Fe + 3CO If 4 moles of Fe2O3 are used, how many moles of Carbon Monoxide (CO) can be produced?
Answer:
Explanation:
Fe₂O₃ + 3C ---> 2Fe + 3CO
1 mole 3 moles
From the balanced equation above , we see that , 1 mole of Fe₂O₃ reacts with carbon to form 3 moles of CO .
So , 4 moles of Fe₂O₃ will react with carbon to form 3 x 4 moles of CO .
moles of CO formed = 3 x 4 moles = 12 moles.
Which of these equations will you used to find the final velocity if the initial
velocity and time is given? *
Answer:
2.77 would be the answer for this
A car starts from rest and accelerates for 2.9 s
with an acceleration of 2 m/s2.
How far does it travel?
Answer in units of m.
Answer:
[tex]a \: = \frac{v - u}{t} [/tex]
2 = v-0/2.9
2× 2.9 = v
v = 5.8 m/s
[tex]v \: = \frac{d}{t} [/tex]
5.8 = d/2.9
5.8×2.9 = d
d = 16.82 m
4
Select the correct answer.
A car traveling south is 200 kilometers from its starting point after 2 hours. What is the average velocity of the car?
ОА.
100 kilometers/hour south
OB.
200 kilometers/hour
O C.
200 kilometers/hour north
OD
100 kilometers/hour
Reset
Next
A runner moves at an average speed of 3.0 m/s and covers 9.5 km. In seconds, how long does the run take?
28.5 s
29.0 s
3.16 s
3200 s
Answer:
3200 seconds
Explanation:
If he ran at 3 m/s for 28.5 seconds, he would have run 85.5 meters
29 seconds would be 87 meters run not 9.5 km
if 6.75g of oxide of lead was reduced to 6.12g of metal, calculate the empirical formula of the oxide
some male coworkers of suzanne are bullying her because she is a woman . which type of hazard is this ?
The focus of the U.S. Joint Global Ocean Flux Study was _______.
a.
the ocean nitrogen cycle
b.
the ocean phosphorus cycle
c.
the ocean carbon cycle
d.
deep ocean currents
Answer:
c.
the ocean carbon cycle
Explanation:
Ocean Exploration
Edge 2020
Answer:
C. The ocean carbon cycle
Explanation:
This was the answer on edge
Pllzzzz help I will mark u as a brainliest
Answer:
You dont need BRAINLY there is an app called slader where you scan the textbook barcode and it shows you the answers for the question in the textbook.
Explanation:
Britney drove at a speed of 85 km/hr south for four hours how far did he travel
A car is traveling 30m/s and slams on the breaks, coming to a complete stop in 5 seconds.
Calculate its acceleration (assuming it was constant). Draw a graph of x-t, v-t and a-t.
Answer:
-6
Explanation:
a=vf-vi/t
vf=0
so that we you subtract vf to vi it will be -30/5=-6
find weight of 45 kg at height 800 km from earth's surface?
Answer:
The weight is 348.4 N
Explanation:
Effect of the Altitude on the Acceleration of Gravity
The effect of gravity decreases with altitude because greater altitudes mean greater distances from the Earth's center.
The practical formula to calculate the gravity as a function of the altitude h is:
[tex]{\displaystyle g_{h}=g_{0}\left({\frac {R_{\mathrm {e} }}{R_{\mathrm {e} }+h}}\right)^{2}}[/tex]
Where go is the conventional gravitational acceleration = [tex]9.80665\ m/s^2[/tex]
R is the Earth's mean radius at the equator = 6,378 Km
h is the altitude.
At a height of h=800 Km, the acceleration of gravity is:
[tex]{\displaystyle g_{h}=9.80665 m/s^2\left(\frac {6,378 Km }{6,378 Km+800Km}}\right)^{2}}[/tex]
Calculating:
[tex]g_h=7.74\ m/s^2[/tex]
The weight is the product of the acceleration of gravity by the mass of the object, thus:
[tex]W=45\ Kg\cdot 7.74\ m/s^2=348.4\ N[/tex]
The weight is 348.4 N
Can an object have a positive position, but a negative velocity? Explain your reasoning.
Answer:
Yes
Explanation:
A position describes the position of an object relative to the x/y-axis (or the four cardinal directions). A velocity is a vector quantity, defining speed with direction.
So if an object is in a positive position, it means they are in the positive x-axis direction (or wherever on the scale the positive values are stated to be) and if it has a negative velocity, it means said object is moving in the opposite direction of the positive x-axis. It is possible for the object to still be in the positive position as it's moving with a negative velocity
In which box could “gas” be placed?
*C. W is not the answer
Which of the following describes the relationship between work and power
Answer:
Power is the rate which work is done.
Explanation:
Power is the rate which work is done. Power is measured in watts.
Work is the use of force to move an object. Work is measured in joules
Describe the nucleus of the atom.
Answer:
The atomic nucleus is the small, dense region consisting of protons and neutrons at the center of an atom, discovered in 1911 by Ernest Rutherford based on the 1909 Geiger Marsden gold foil experiment. Almost all of the mass of an atom is located in the nucleus, with a very small contribution from the electron cloud.
How are Covalent bonds formed?
I believe it is introduced when the variation between the electronegativities of only two atoms is way too small for any transfer to take place to produce new ions.
Considering the definition of covalent bond, Covalent bonds are formed when valence electrons of non-metallic elements are shared and hold this elements together, forming a molecule.
Covalent bondThe covalent bond is the chemical bond between atoms where electrons are shared, forming a molecule.
Covalent bonds are established between non-metallic elements. These elements have many electrons in their outermost level (valence electrons) and have a tendency to gain electrons to acquire the stability of the electronic structure of noble gas. The shared electron pair is common to the two atoms and holds them together.
SummaryCovalent bonds are formed when electrons in the outermost level of non-metallic elements are shared and hold this elements together, forming a molecule.
Learn more about covalent bond:
brainly.com/question/12732708
brainly.com/question/29437411
#SPJ4
A unit is an amount used to measure something True or false
I do not know
hi I thinks the answer is Tralse
A surfer travels for 45 min at an average speed of 0.6 kilometers per min. How far does he travel in that
time?
Answer:
you would do multiplication, d=rt. (distance=d rate=r time=t).
Explanation:
You already have all the variables figure out so just plug in the numbers.
For an easier equation you would just do .6*45=27, the 27 is the total kilometers in 45 minutes.
please help
Which equipment is best to hold and to measure liquids?
A). flask and graduated cylinder
B). scale and ruler
C). caliper and thermometer
D). stopwatch and beaker
Answer:
I'm pretty sure that the answer is A
HELP PLEASE
Find the net force necessary for a 15 kg object to accelerate at 20 m/s/s.
Answer:
The answer is 300 NExplanation:
The force acting on an object given the mass and acceleration we use the formula
force = mass × accelerationWe have
force = 15 × 20
We have the final answer as
300 NHope this helps you
In economics, _________ is the amount of a resource that firms and producers are willing and able to provide to the marketplace
sectors are the amount of resources
A vertical rope is attached to an object that has a mass of 40.0 kg and is at rest.
The tension in the rope needed to give the object an upward speed of 3.50 m/s
in 0.700 s is
Answer:
239.2 N
Explanation:
Given that a vertical rope is attached to an object that has a mass of 40.0 kg and is at rest.The tension in the rope needed to give the object an upward speed of 3.50 m/s
in 0.700 s is
The tension in the rope and the weight of the mass will be acting in an opposite direction.
T - mg = ma ....... (1)
Where acceleration a = Velocity/ time
a = 3.5 / 0.7
a = 5 m/s^2
Substitutes acceleration a into the equation 1 above.
T - 40 × 9.8 = 40 × 5
T - 39.2 = 200
T = 200 + 39.2
T = 239.2N
Therefore, the tension in the rope needed to give the object an upward speed of 3.50 m/s
in 0.700 s is 239.2N
Answer:
The answer is T=592 N
Explanation:
Fw= 392N
a=v/t, so a=3.5ms^-1/0.7s
a=5ms^-2
Fnet=ma
T-Fw=ma
T-392N=40kg(5ms^-2)
T=592N
The fastest human ever recorded was Usain Bolt at 43 km/h. If a white tail
deer can run 3 km in 3 minutes and 45 seconds, how many km/h faster would Usain Bolt need to run to catch a deer?
Please show work! Will mark brainliest!
mechanical advantage of a simple machine is 4,what does it mean?
Answer:
I hope this answer is correct
Explanation:
The mechanical advantage of a machine is 4. Mechanical advantage MA is the ratio of output (generated by the machine) force to input (applied to the machine) force. So MA = 4 means that for example if you apply 100 N then your machine will multiply that force and generate 400 N.
A car started its motion from rest and accelerated for 6 seconds, with the acceleration of 4 m/s2. Then it decelerated for 5 seconds, with the acceleration of -1.6 m/s2. What was the velocity of the car after 6+5 seconds?
Answer:
16 m/s
Explanation:
from the formula: a = velocity/time
you calculate the velocity in both cases (when time is 5 sec and 6 sec) by using the formula: velocity = a x time
v (5 sec) =24 m/s
v (6 sec) = - 8 m/s
then : add v (5 sec) to v (6 sec) and the result is 16 m/s
How is acceleration related to force when mass is constant, according to Newton's second law of motion?
Answer:
According to Newton's second law of motion, acceleration is directly proportional to force. As the force increases (when mass is constant), the acceleration increases. This can be shown in the following formula.
[tex]f = ma[/tex]
[tex]a = \frac{f}{m} [/tex]
f = force
m = mass
a = acceleration
According to Newton's second law of motion, acceleration is directly proportional to the force.
What is Newton's second law of motion?According to Newton's second law of motion, an object's change in velocity is influenced by the force being applied to it. An object must accelerate in order to change its velocity. The rate at which an object's velocity alters over time is known as its acceleration.
Since both acceleration and force are vector quantities, the acceleration of an object is determined by the direction of the applied force. How much a net force will alter an object's velocity is described by Newton's second law of motion.
According to Newton's second law of motion, an object's acceleration is directly proportional to the force acting on it.
Learn more about Newton's second law of motion, here:
https://brainly.com/question/13447525
#SPJ5