The worker's tissue absorbed 0.003753 Joules of energy from the slow neutron radiation. and Since 6.65 rem exceeds the maximum permissible dose of 5 rem per year, the radiation dosage was exceeded.
To calculate the energy absorbed by the worker's tissue, we need to use the given dose (1.33 rad) and the mass of the tissue (300 g). The equation for this is:
Energy (E) = Dose (D) × Mass (m) × Absorbed Dose Coefficient (c)
The absorbed dose coefficient for slow neutron radiation is 0.0094 J/kg per rad. First, convert the mass from grams to kilograms:
m = 300 g × (1 kg / 1000 g) = 0.3 kg
Now, plug in the values into the equation:
E = 1.33 rad × 0.3 kg × 0.0094 J/kg per rad = 0.003753 J
The worker's tissue absorbed 0.003753 Joules of energy from the slow neutron radiation.
The maximum permissible radiation dosage for a worker depends on the type of radiation. For slow neutrons, the maximum permissible dose is 5 rem per year. To determine if this dose has been exceeded, we need to convert the given dose (1.33 rad) to rem using the quality factor (QF) for slow neutrons:
Dose in rem = Dose in rad × QF
For slow neutrons, the quality factor is 5. Therefore,
Dose in rem = 1.33 rad × 5 = 6.65 rem
Since 6.65 rem exceeds the maximum permissible dose of 5 rem per year, the radiation dosage was exceeded.
For more such questions on neutron radiation , Visit:
https://brainly.com/question/15712203
#SPJ11
An engine operating at maximum theoretical efficiency whose cold-reservoir temperature is 7 degrees Celsius is 40% efficient. By how much should the temperature of the hot reservoir be increased to raise the efficiency to 60%?
The temperature of the hot reservoir should be increased by 426.85 degrees Celsius to raise the efficiency to 60%.
The maximum theoretical efficiency of an engine is given by the Carnot efficiency, which is equal to
(Th - Tc)/Th,
where Th is the absolute temperature of the hot reservoir and
Tc is the absolute temperature of the cold reservoir.
In this problem, we are given that the engine is operating at maximum theoretical efficiency, which means that its efficiency is 40%. We are also given that Tc is equal to 7 degrees Celsius, which is equal to 280 Kelvin.
To find the temperature of the hot reservoir that would result in an efficiency of 60%, we can use the following equation:
(Th - Tc)/Th = 0.6
Solving for Th, we get:
Th = Tc/(1 - 0.6) = Tc/0.4
Plugging in the values we know, we get:
Th = 280 K / 0.4 = 700 K
Therefore, the temperature of the hot reservoir should be increased by 700 K - 273.15 K = 426.85 degrees Celsius to raise the efficiency to 60%.
To know more about "Theoretical efficiency" refer here:
https://brainly.com/question/30004014#
#SPJ11
an asteroid of mass 1.8×105 kg , traveling at a speed of 31 km/s relative to the earth, hits the earth at the equator tangentially, and in the direction of earth's rotation. Use angular momentum to estimate the percent change in the angular speed of the Earth as a result of the collision.
The percent change in the angular speed of the Earth due to the collision is approximately 6.7 × 10⁻¹³%.
The conservation of angular momentum states that the total angular momentum of a system remains constant unless acted upon by an external torque. In this case, the Earth and the asteroid make up the system, and their angular momenta are conserved before and after the collision.
The angular momentum of the Earth before the collision is given by:
L₁ = Iω₁
where I is the moment of inertia of the Earth and ω₁ is the angular speed of the Earth before the collision.
The angular momentum of the Earth and asteroid system after the collision is given by:
L₂ = (I + mR²)ω₂
where m is the mass of the asteroid, R is the radius of the Earth, and ω₂ is the angular speed of the Earth and asteroid after the collision.
Since angular momentum is conserved, we can equate L₁ and L₂:
L₁ = L₂
Iω₁ = (I + mR²)ω₂
Rearranging for ω₂, we get:
ω₂ = (Iω₁) / (I + mR²)
We can use the moment of inertia of the Earth, I = 8.04 × 10³⁷ kg m², and the given values for the mass of the asteroid, m = 1.8 × 10⁵ kg, and its velocity, v = 31 km/s, to calculate the percent change in the angular speed of the Earth:
ω₁ = v / R = (31,000 m/s) / (6.38 × 10⁶ m) = 4.86 × 10⁻³ rad/s
ω₂ = (Iω₁) / (I + mR²) = (8.04 × 10³⁷ kg m² × 4.86 × 10⁻³ rad/s) / (8.04 × 10³⁷ kg m² + 1.8 × 10⁵ kg × (6.38 × 10⁶ m)²) = 4.85976 × 10⁻³ rad/s
The percent change in angular speed is:
Δω = |(ω₂ - ω₁) / ω₁| × 100% = |(4.85976 × 10⁻³ - 4.86 × 10⁻³) / 4.86 × 10⁻³| × 100% ≈ 6.7 × 10⁻¹³%
Thus, the percent change in the angular speed of the Earth due to the collision is approximately 6.7 × 10⁻¹³%.
learn more about momentum here:
https://brainly.com/question/30677308
#SPJ11
A 1.5-cm-tall candle flame is 61cm from a lens with a focal length of 22cm .A. What is the image distance?B. What is the height of the flame's image? Remember that an upright image has a positive height, whereas an inverted image has a negative height.
The image distance is approximately 37.9 cm, and the height of the flame's image is approximately -0.93 cm (inverted).
The thin lens equation:
1/f = 1/di + 1/do
where f is the focal length of the lens, di is the image distance, and do is the object distance.
A. What is the image distance?
First, we need to convert the height of the flame from centimeters to meters, as the focal length is given in meters:
h = 1.5 cm = 0.015 m
The distance from centimeters to meters as well:
do = 61 cm = 0.61 m
Now we can plug in the values into the thin lens equation and solve for di:
1/0.22 = 1/di + 1/0.61
di = 0.155 m
A. The image distance is 0.155 meters.
B. The height of the flame's image is 0.00381 meters, or 3.81 millimeters.
1. Lens formula: 1/f = 1/u + 1/v
2. Magnification formula: M = h'/h = v/u
A. Image distance (v):
Given, focal length (f) = 22 cm and object distance (u) = 61 cm.
1/f = 1/u + 1/v
1/22 = 1/61 + 1/v
61v = 22v + 22*61
v = (22*61)/(61-22)
v ≈ 37.9 cm
B. Height of the flame's image (h'):
Given, object height (h) = 1.5 cm.
Now, using the magnification formula:
M = h'/h = v/u
h'/1.5 = 37.9/61
h' = (1.5 * 37.9) / 61
h' ≈ 0.93 cm (inverted image, since it's real)
To know more about inverted visit:-
https://brainly.com/question/30508964
#SPJ11
The amount of energy released when 45g of -175 degrees C steam is cooled to 90 degrees C is______.a) 419481b) 317781c) 101700d) 417600
The answer is not in the given options.
The amount of energy released when 45g of -175°C steam is cooled to 90°C can be calculated using the specific heat capacity and the enthalpy of vaporization for water. The process involves two steps: heating the steam from -175°C to 100°C and then condensing it to 90°C.
1. Heating the steam from -175°C to 100°C:
q1 = mass × specific heat (steam) × temperature change
q1 = 45g × 2.0 J/g°C × (100 - (-175))
q1 = 45g × 2.0 J/g°C × 275
q1 = 24750 J
2. Condensing the steam to 90°C:
q2 = mass × enthalpy of vaporization
q2 = 45g × 2260 J/g
q2 = 101700 J
Total energy released = q1 + q2
Total energy = 24750 J + 101700 J
Total energy = 126450 J
None of the given options (a) 419481, b) 317781, c) 101700, d) 417600) match the calculated value. It's possible that there might be an error in the given options or the question itself.
To know more about Enthalpy of Vaporization visit:
https://brainly.com/question/30258840
#SPJ11
true/false. the mass on the slender barn oa pivoted at o with length l determine the frequency of small vibrations on the bar
The given statement " the mass on the slender barn oa pivoted at o with length l determine the frequency of small vibrations on the bar" is True because the mass on the slender bar OA pivoted at O with length L determines the frequency of small vibrations on the bar.
1. The mass of the slender bar, along with its length L and the pivot point O, are factors that contribute to the moment of inertia (I) of the bar.
2. The moment of inertia, along with the gravitational constant (g) and the distance from the pivot point to the center of mass, are used to calculate the angular frequency (ω) of small vibrations using the formula ω² = mgL/I.
3. The angular frequency (ω) is then used to determine the frequency of small vibrations (f) using the formula f = ω/(2π).
So, the mass on the slender barn oa pivoted at o with length l determine the frequency of small vibrations on the bar is True.
Learn more about mass at
https://brainly.com/question/19694949
#SPJ11
if a pair of reading glasses has power of 2.5 d lenses. what is the focal length of these lenses?
The focal length of lenses with a power of 2.5 d is 0.4 meters or 40 centimeters. This is because the focal length is the reciprocal of the power in diopters, so 1/2.5 d = 0.4 m.
It's important to understand what power and focal length mean in the context of lenses. Power is a measure of how strongly a lens refracts (bends) light. A lens with a high power will bend light more than a lens with a lower power. Power is measured in diopters, which is the inverse of the focal length in meters.
The focal length is the distance between the lens and the point where light converges (or diverges) after passing through the lens. For convex (converging) lenses like those in reading glasses, the focal length is positive and is the distance from the lens where parallel light rays converge to a point.
In the case of lenses with a power of 2.5 d, we know that the power is 2.5 diopters. To find the focal length, we take the reciprocal of the power: 1/2.5 d = 0.4 m. This means that light rays passing through the lens will converge to a point 0.4 meters (or 40 centimeters) away from the lens.
So, lenses with a power of 2.5 d have a focal length of 0.4 meters. This means that they are suitable for correcting moderate farsightedness (hyperopia) or presbyopia, which is a condition where the eyes lose their ability to focus on nearby objects due to age. The lenses will cause light rays to converge at a point 0.4 meters away from the lens, allowing the wearer to see nearby objects more clearly.
To learn more about focal length visit:
brainly.com/question/29870264
#SPJ11
If two coils placed next to one another have a mutual inductance of 5.00 mH, what voltage is induced in one when the 2.00 A current in the other is switched off in 30.0 ms?
The formula for calculating the induced voltage is V = -M(dI/dt), where V is the induced voltage, M is the mutual inductance, and dI/dt is the rate of change of current. Plugging in the values given, we get V = -5.00mH(2.00A/0.03s) = -333.33 mV.
Mutual inductance is a property of two coils that determines how much voltage is induced in one coil when the current in the other coil changes. In this case, if two coils have a mutual inductance of 5.00 mH, and a current of 2.00 A is switched off in 30.0 ms in one coil, we can calculate the induced voltage in the other coil using Faraday's Law of Electromagnetic Induction.
The negative sign indicates that the induced voltage is in the opposite direction to the original current. So, when the current in one coil is switched off, the induced voltage in the other coil will be -333.33 mV, which can cause a brief surge of current in the opposite direction. It's important to consider mutual inductance when designing circuits with multiple coils to prevent unwanted interference and ensure proper functioning.
To know more about induced voltage visit:
https://brainly.com/question/30325472
#SPJ11
consider the vector field is this vector field conservative? use method of your choice to evaluate along the curve
To determine if a vector field is conservative, we can use the curl method. The curl of a conservative vector field is always zero. In order to evaluate the vector field along a curve, we can use line integrals.
First, find the curl of the given vector field. If the curl is zero, the vector field is conservative. Next, to evaluate the vector field along the curve, compute the line integral of the vector field along the given curve. If the vector field is conservative, the line integral will be path-independent, which means it only depends on the endpoints of the curve, and not on the curve itself.
To determine if a vector field is conservative, calculate its curl. If the curl is zero, the vector field is conservative. To evaluate the vector field along a curve, compute the line integral of the vector field along the given curve.
To know more about vector field, visit:
https://brainly.com/question/24332269
#SPJ11
A terminal alkyne (RC≡CH) is exposed to excess HBr. What rule should be followed to determine the placement of the halogen atoms in the product?
A. Anti-Markovnikov rule
B. Hofmann's rule
C. Markovnikov rule
D. Zaitzev's rule
This is an addition reaction to an alkyne. The key is to determine which carbon is more electrophilic.
The terminal carbon (attached to the hydrogen) is slightly more electrophilic due to resonance stabilization of the pi bond.
Therefore, according to the Markovnikov rule, the hydrohalogenation will place the halogen atoms on the terminal carbon.
The answer is C. The Markovnikov rule applies.
A and D are incorrect.
B and C are plausible but C is more specific for this reaction.
So the correct choice is C. Markovnikov rule.
The placement of halogen atoms in the product of a terminal alkyne exposed to excess HBr follows the anti-Markovnikov rule.
When a terminal alkyne (RC≡CH) is exposed to excess HBr, the placement of halogen atoms in the product follows the anti-Markovnikov rule. This means that the hydrogen (H) atom is added to the carbon atom that already has the most hydrogen atoms (more substituted carbon), while the bromine (Br) atom is added to the carbon atom with fewer hydrogen atoms (less substituted carbon).
This is in contrast to the Markovnikov rule, which states that the hydrogen atom would be added to the less substituted carbon, and the halogen atom would be added to the more substituted carbon. The anti-Markovnikov rule applies to reactions of alkenes and alkynes with HX (hydrogen halides) in the presence of peroxides. It is important to understand these rules for product prediction in organic chemistry reactions.
To know more about the Anti-Markovnikov rule visit:
https://brainly.com/question/14529644
#SPJ11
We know that our atmosphere is optically thick enough that when we look straight up, we see some scattered sunlight; on the other hand, it is pretty optically thin, since starlight is not scattered very much. Suppose at blue wavelengths (λ=400nm) the optical depth is 0.1. What fraction of starlight is scattered before it reaches the ground? What is the cross section for scattering of blue light by air molecules? In the formula\sigma \approx\sigma_T(\lambda_0/\lambda)^4, what would you infer λ0 to be?
If the optical depth for blue light in the atmosphere is 0.1, then only 10% of the light at this wavelength is scattered before it reaches the ground. This means that 90% of the blue starlight would pass straight through the atmosphere without being scattered.
The cross section for scattering of blue light by air molecules can be determined using the formula:
σ ≈ σ_T(λ_0/λ)^4
where σ_T is the Thomson cross section,
λ_0 is the characteristic wavelength of the scatterer, and
λ is the wavelength of the incident light.
Since we are interested in the scattering of blue light (λ = 400 nm), we need to determine λ_0. This characteristic wavelength depends on the size of the scattering particle, which is much smaller than the wavelength of light.
For air molecules, λ_0 is typically on the order of 1 nm. Using this value, we can calculate the cross section for scattering of blue light by air molecules to be approximately: 2.3 × 10^-31 m^2.
In summary, only 10% of blue starlight is scattered by the atmosphere, and the cross section for scattering of blue light by air molecules is approximately 2.3 × 10^-31 m^2, with a characteristic wavelength λ_0 of approximately 1 nm.
To know more about "Atmosphere" refer here:
https://brainly.com/question/30157325#
#SPJ11
A rocket is launched into deep space, where gravity is negligible. In the first second, it ejects 1/160 of its mass as exhaust gas and has an acceleration of 15.4 m/s2 .
What is , the speed of the exhaust gas relative to the rocket?
Express your answer numerically to three significant figures in kilometers per second.
v(g)=?
The speed of the exhaust gas relative to the rocket is approximately 2.464 km/s.
How to find the speed of the exhaust gas?To solve this problem, we can use the conservation of momentum. Let's assume that the rocket and the ejected exhaust gas are the only objects in the system.
Before the ejection, the momentum of the system is zero, since the rocket is at rest. After the ejection, the momentum of the system is:
[tex]m_r * v_r + m_e * v_e[/tex]
where [tex]m_r[/tex] is the mass of the rocket, [tex]v_r[/tex]is its velocity, [tex]m_e[/tex] is the mass of the ejected gas, and [tex]v_e[/tex] is the velocity of the gas relative to the rocket.
Since the rocket is still accelerating, we need to use the kinematic equation:
[tex]v_r = a * t[/tex]
where a is the acceleration of the rocket and t is the time elapsed (1 second in this case).
Using conservation of momentum and plugging in the given values, we get:
[tex]0 = m_r * a * t + m_e * v_e[/tex]
Solving for [tex]v_e,[/tex] we get:
[tex]v_e = -(m_r * a * t) / m_e[/tex]
Plugging in the given values, we get:
[tex]v_e = -(m_r * a * t) / m_e[/tex][tex]v_e = -(m_r * a * t) / (1/160 * m_r)[/tex][tex]v_e = -160 * a * t[/tex][tex]v_e = -160 * 15.4 m/s^2 * 1 s[/tex][tex]v_e = -2464 m/s[/tex]The negative sign indicates that the exhaust gas is ejected in the opposite direction of the rocket's motion.
To convert this velocity to kilometers per second, we divide by 1000:
[tex]v_e = -2464 m/s / 1000[/tex][tex]v_e = -2.464 km/s[/tex] (to three significant figures)Therefore, the speed of the exhaust gas relative to the rocket is approximately 2.464 km/s.
Learn more about speed
brainly.com/question/28224010
#SPJ11
Suppose a generator has a peak voltage of 295 V and its 500 turn, 5.5 cm diameter coil rotates in a 0.38 T field. Randomized Variables Eo = 295 V B=0.35T d=5.5 cm * What frequency in rpm must the generator be operating at?
The generator must operate at a frequency of 31.8 rpm in order to produce a peak voltage of 295 V under the given conditions.
In order to generate an alternating current, a coil of wire must rotate in a magnetic field. The voltage produced by the generator is proportional to the strength of the magnetic field, the number of turns in the coil, and the rate of rotation. The frequency of the alternating current produced by the generator is determined by the speed of rotation, which is typically measured in revolutions per minute (rpm).
To determine the frequency in rpm at which a generator must operate in order to produce a certain voltage, we can use the following formula:
f = (N/2) * (Bdπ) / Eo
where:
f = frequency in rpm
N = number of turns in the coil
B = strength of the magnetic field in tesla (T)
d = diameter of the coil in meters (m)
Eo = peak voltage output of the generator in volts (V)
π = the mathematical constant pi (approximately 3.14)
In the given problem, the generator has a peak voltage of 295 V, a coil with 500 turns and a diameter of 5.5 cm, and rotates in a magnetic field with a strength of 0.35 T. Plugging in the given values into the formula, we get:
f = (500/2) * (0.35 * 0.055 * π) / 295
f = 31.8 rpm
Therefore, the generator must operate at a frequency of 31.8 rpm in order to produce a peak voltage of 295 V under the given conditions.
Learn more about voltage at: https://brainly.com/question/29314897
#SPJ11
How many photons of light having a wavelength of 4000A?
There are approximately 2.01 x 10^18 photons of light with a wavelength of 4000 Å in 1 J of energy.
To determine the number of photons of light having a wavelength of 4000 Å, we can use the formula:
E = h * c / λ
where E is the energy of a photon, h is Planck's constant, c is the speed of light, and λ is the wavelength of the light.
First, we need to convert the wavelength from angstroms (Å) to meters (m):
4000 Å = 4000 × 10^-10 m
Plugging in the values for h, c, and λ, we get:
E = (6.626 x 10^-34 J s) * (2.998 x 10^8 m/s) / (4000 x 10^-10 m) = 4.97 x 10^-19 J
The energy of a photon is also related to its frequency (ν) by the equation:
E = h * ν
where ν is the frequency of the light. We can rearrange this equation to solve for the frequency:
ν = E / h
Plugging in the energy value we just calculated, we get:
ν = 4.97 x 10^-19 J / 6.626 x 10^-34 J s = 7.50 x 10^14 Hz
Now, we can use the formula for the energy of a photon to calculate the number of photons in a given amount of energy. If we have a total energy of E_total, the number of photons (N) is given by:
N = E_total / E
Let's assume that we have 1 J of energy. Then, the number of photons with a wavelength of 4000 Å would be:
N = 1 J / 4.97 x 10^-19 J = 2.01 x 10^18 photons
Therefore, there are approximately 2.01 x 10^18 photons of light with a wavelength of 4000 Å in 1 J of energy.
Visit to know more about Wavelength:-
brainly.com/question/24452579
#SPJ11
when a relative motion analysis involving two sets of coordinate azes is used the
When a relative motion analysis is performed, it involves analyzing the motion of one object with respect to another object that is moving in a different direction or at a different velocity.
To do this, two sets of coordinate axes are used, one for each object. The relative motion analysis allows us to understand the motion of one object relative to the other, and to determine the distance, speed, and acceleration between them.
It is particularly useful in situations where the motion of an object is not absolute but rather depends on the motion of another object.
The use of two coordinate axes helps to simplify the analysis and allows us to better understand the relative motion of the two objects.
To know more about relative motion, refer here:
https://brainly.com/question/30428774#
#SPJ11
Two objects, P and Q, have the same momentum. Q has more kinetic energy than P if it:
A. weighs more than P
B. is moving faster than P
C. weighs the same as P
D. is moving slower than P
E. is moving at the same speed as P
Option (D). is moving slower than P .The correct answer is that Q has more kinetic energy than P when it is moving slower than P.
How can we determine the relationship between the velocities of objects ?Kinetic energy is given by the equation KE = (1/2)mv^2, where KE represents kinetic energy, m represents mass, and v represents velocity. Since the momentum of objects P and Q is the same, we can write their momenta as p = mv, where p represents momentum.
If objects P and Q have the same momentum, their velocities (v) must be inversely proportional to their masses (m).
This means that if object Q weighs more than object P, it must be moving at a slower velocity in order to have the same momentum.
Since kinetic energy depends on both mass and velocity, when object Q is moving slower than object P, it will have less kinetic energy, contrary to the statement in the question.
We know that kinetic energy is directly proportional to the square of the velocity. In other words, as the velocity increases, the kinetic energy increases even more rapidly. Similarly, as the velocity decreases, the kinetic energy decreases at an even faster rate.
Now, let's consider the scenario where objects P and Q have the same momentum.
This means that their momenta are equal: [tex]p_P = p_Q[/tex]. We can express momentum as the product of mass and velocity: [tex]m_Pv_P = m_Qv_Q.[/tex]
Learn more about Kinetic Energy
brainly.com/question/26472013
#SPJ11
A 15-n bucket (mass = 1.5 kg) hangs on a cord. the cord is wrapped around a frictionless pulley of mass 4.0 kg and radius 33.0 cm. find the linear acceleration of the bucket as it falls, in m/s2.
The linear acceleration of the bucket as it falls is [tex]13.5 m/s^2[/tex]
To find the linear acceleration of the bucket as it falls, we need to use the free-body diagram and the equations of motion.
The forces acting on the system are the weight of the bucket, the tension in the cord, and the weight of the pulley. Since the pulley is frictionless, we can assume that the tension in the cord is the same on both sides of the pulley.
The weight of the bucket can be calculated as:
F_b = m_b * g
where m_b is the mass of the bucket and g is the acceleration due to gravity.
The weight of the pulley can be calculated as:
F_p = m_p * g
where m_p is the mass of the pulley.
The tension in the cord can be calculated from the torque equation:
τ = F * r
where τ is the torque, F is the tension in the cord, and r is the radius of the pulley.
The torque on the pulley can be calculated as:
τ = I * α
where I is the moment of inertia of the pulley and α is the angular acceleration of the pulley.
Since the pulley is rolling without slipping, the linear acceleration of the pulley is related to its angular acceleration as:
a = r * α
where a is the linear acceleration of the pulley.
To find the linear acceleration of the bucket, we can use the equations of motion for the system:
F_t - F_b - F_p = m_total * a
where F_t is the tension in the cord, F_b is the weight of the bucket, F_p is the weight of the pulley, m_total is the total mass of the system, and a is the linear acceleration of the bucket.
Substituting the torque equation and the linear acceleration of the pulley, we get:
F_t - F_b - F_p = m_total * (F_t / (m_b + m_p + I/r²))
Substituting the given values, we get:
F_t - 15 N - 39.2 N = (1.5 kg + 4.0 kg + (1/2)(4.0 kg)(0.33 m)²/(0.33 m)²) * (F_t / (1.5 kg + 4.0 kg + (1/2)(4.0 kg)(0.33 m)²/(0.33 m)²))
Simplifying, we get:
F_t - 54.2 N = (5.0 kg) * (F_t / 6.5 kg)
Solving for F_t, we get:
F_t = 35.2 N
The linear acceleration of the bucket can now be calculated from the equation:
F_t - F_b = m_b * a
Substituting the given values, we get:
35.2 N - 15 N = 1.5 kg * a
Solving for a, we get:
a = 13.5 [tex]m/s^2[/tex]
To know more about linear acceleration refer here
https://brainly.com/question/13723307#
#SPJ11
light is emitted by a hydrogen atom as its electron falls from the n = 5 state to the n = 2 state.
Therefore, the emitted light has a frequency of 3.03 x 10^15 Hz and a wavelength of 98.4 nm, which corresponds to ultraviolet light
What is the frequency or wavelength of the light emitted by a hydrogen atom?When an electron in a hydrogen atom falls from a higher energy level to a lower one, it emits a photon of light with a specific energy that corresponds to thebetween the two levels. The energy of the photon can be calculated using the formula:
E = hf
where E is the energy of the photon, h is Planck's constant (6.626 x 10^-34 joule-seconds), and f is the frequency of the light.
The energy difference between the n = 5 and n = 2 states in a hydrogen atom is given by the Rydberg formula:
ΔE = Rh(1/n2^2 - 1/n1^2)
where ΔE is the energy difference, Rh is the Rydberg constant (1.097 x 10^7 m^-1), n1 is the initial energy level (n1 = 5), and n2 is the final energy level (n2 = 2).
Substituting these values into the equation, we get:
ΔE = Rh(1/2^2 - 1/5^2)
= Rh(1/4 - 1/25)
= Rh(21/100)
The energy of the photon emitted when the electron falls from the n = 5 state to the n = 2 state is equal to the energy difference between these two states:
E = ΔE = Rh(21/100)
Finally, we can calculate the frequency of the emitted light using the formula:
f = E/h
Substituting the values we obtained, we get:
[tex]f = (Rh/ h)(21/100)\\ = (1.097 x 10\^\ 7 m\^\ -1 / 6.626 x 10\^\ -34 J s) (21/100)\\ = 3.03 x 10\^\ 15 Hz[/tex]
Therefore, the light emitted by a hydrogen atom as its electron falls from the n = 5 state to the n = 2 state has a frequency of 3.03 x 10^15 Hz. This corresponds to a wavelength of approximately 99.2 nanometers, which is in the ultraviolet region of the electromagnetic spectrum.
Learn more about Frequency
brainly.com/question/14316711
#SPJ11
Where D = 20m throughout all trials and the t (sec) =Trial 1 : 0.08 μS (microsecond)Trial 2: 0.075 μSTrial 3: 0.1 μSTrial 4: 0.1 μSTrial 5: 0.2 μSv = D/t (m/s)n = c/v1) Compute the speed of light in the polymer, v.2) Compute the "index of refraction" of the polymer material, n , defined as the ratio of the speed of light in vacuum to the speed of light in the medium, where c is the speed of light in vacuum, 3.00 x 10^8 m/s. n = c / v.3) Because of poor calibration, it is possible that some of the oscilloscopes' time bases are as much as 15% off. Assuming for the moment that this was the case for you, what statements do you need to make about the accuracy and the precision of your result for the speed of light in the polymer medium, v, which you computed above.
The speed of light in the polymer is 250000000 m/s, the index of refraction is 1.2, and the accuracy and precision of the result may be affected due to the uncertainty in the time measurement.
The speed of light in the polymer can be calculated by taking the distance, D, and dividing it by the time, t, for each trial. The average speed is found to be 250000000 m/s. The index of refraction, n, is calculated by dividing the speed of light in vacuum, c, by the speed of light in the polymer, giving a value of 1.2. The uncertainty in the time measurement due to the potential 15% error in the oscilloscope's time base may affect both the accuracy and precision of the results.
The accuracy refers to how close the measured value is to the true value, while the precision refers to the reproducibility of the measurements. In this case, the accuracy may be affected by the systematic error introduced by the uncertainty in the time measurement, while the precision may be affected by the variability in the measurements caused by the potential error in the time base.
To learn more about speed of light, here
https://brainly.com/question/394103
#SPJ4
A pistol is fired horizontally toward a target 196 m away. The bullet's velocity is 356 m/s. What was the height (y) of the pistol?
The height (y) of the pistol is 94 meters. To explain, we can use the fact that the horizontal and vertical motions are independent of each other.
To explain, we can use the fact that the horizontal and vertical motions are independent of each other. Since the bullet is fired horizontally, its initial vertical velocity is zero. We can use the equation for vertical motion:
[tex]y = (1/2)gt^2[/tex]
where y is the vertical displacement, g is the acceleration due to gravity (approximately 9.8 m/s^2), and t is the time of flight.
The time of flight can be calculated using the horizontal distance and the horizontal velocity:
[tex]t = d/v[/tex]
where d is the horizontal distance (196 m) and v is the horizontal velocity (356 m/s).
Substituting the values, we get:
[tex]t = 196 m / 356 m/s ≈ 0.551 seconds[/tex]
Plugging this value into the equation for vertical motion, we find:
y = (1/2)(9.8 m/s^2)(0.551 s)^2 ≈ 94 meters.
learn more about motions here:
https://brainly.com/question/12640444
#SPJ11
Determine the period of a 1.9- mm -long pendulum on the moon, where the free-fall acceleration is 1.624 m/s2m/s2 . express your answer with the appropriate units.
The period of a 1.9-mm-long pendulum on the moon is 0.244 s.
The period of a pendulum is given by:
T = 2π √(L/g)
where L is the length of the pendulum and g is the acceleration due to gravity.
On the moon, the acceleration due to gravity is [tex]1.624 m/s^2[/tex], and the length of the pendulum is 1.9 mm, or 0.0019 m.
Substituting these values into the equation for the period, we get:
[tex]T = 2\pi \sqrt{(0.0019 m / 1.624 m/s^2)[/tex]
Simplifying this expression, we get:
T = 2π √(0.0019/1.624)
T = 2π √0.00117
T = 0.244 s (rounded to three significant figures)
To know more about pendulum refer here
https://brainly.com/question/29268528#
#SPJ11
For a magnetic field to be induced (an electro magnet) so north is to the right, predict the conventional current flow in the coil by drawing arrows in the coil.
The conventional current flow in the coil will be according to the right-hand rule as drawn in the below diagram.
To induce a magnetic field with the north pole to the right in a coil, we need to use the right-hand rule for the magnetic field induced. This rule states that:
"If we wrap our right hand around the wire so that our thumb points in the direction of magnetic field, then the direction of the curled fingers represents the direction of the conventional current. Also, the thumb represents the direction that will be the north pole of the electromagnet. In north pole direction current is anticlockwise where as in south pole current is clockwise."
Given that the north is to the right. Now if we curled fingers in such a way that the thumb points to the north which is toward the right, the curled fingers represent the direction of the conventional current flow.
Learn more about magnetic field here
brainly.com/question/11514007
#SPJ4
While in the first excited state, a hydrogen atom is illuminated by various wavelengths of light.
What happens to the hydrogen atom when illuminated by each wavelength?
450.3 nm?
The options are:
stays in 2nd state
jumps to 3rd state
jumps to 4th state
jumps to 5th state
jumps to 6th state
is ionized
I have already tried jumps to 5th state, and jumps to 4th state and they are incorrent.
When a hydrogen atom in the first excited state is illuminated by light with a wavelength of 450.3 nm, it will not absorb the light and will remain in the first excited state.
The behavior of a hydrogen atom when it is illuminated by different wavelengths of light depends on the energy of the photons in the light. The energy of a photon is directly proportional to its frequency and inversely proportional to its wavelength. When a hydrogen atom absorbs a photon of a specific energy, it gets excited and jumps to a higher energy level.
In the case of a hydrogen atom in the first excited state, when it is illuminated by light with a wavelength of 450.3 nm, the atom will not remain in the same state. This is because the energy of the photons of this wavelength is not equal to the energy difference between the first and second excited states of the hydrogen atom. Therefore, the hydrogen atom will not absorb the light and will remain in the first excited state.
To calculate which energy level the hydrogen atom will jump to when illuminated by a specific wavelength of light, we can use the Rydberg formula:
1/λ = R(1/n1^2 - 1/n2^2)
where λ is the wavelength of the light, R is the Rydberg constant (1.0974 x 10^7 m^-1), n1 is the initial energy level, and n2 is the final energy level.
By plugging in the values, we can determine that a hydrogen atom in the first excited state (n1 = 2) will jump to the third excited state (n2 = 3) when illuminated by light with a wavelength of 656.3 nm.
In summary, when a hydrogen atom in the first excited state is illuminated by light with a wavelength of 450.3 nm, it will not absorb the light and will remain in the first excited state.
To know more about Wavelength visit:
https://brainly.com/question/31143857
#SPJ11
Determine the electric field →E at point D. Express your answer as a magnitude and direction.
The direction of the electric field is along the line joining the two point charges and pointing away from the positive charge. Therefore, the electric field at point D is 3750 N/C in the direction of the negative charge.
To determine the electric field at point D, we need to use Coulomb's law. First, we need to find the net electric field due to the two point charges Q1 and Q2 at point D. We can find the electric field magnitude at point D using the formula :- E = k(Q1/r1^2 + Q2/r2^2)
where k is Coulomb's constant, Q1 and Q2 are the magnitudes of the point charges, and r1 and r2 are the distances between point D and each of the point charges.
Using the given values, we get:
E = 9 × 10⁻⁹ N·m⁻²/C⁻² [(3 × 10^-6 C)/(0.12 m)⁻² + (2 × 10⁻⁶ C)/(0.08 m)⁻²]
E = 3750 N/C
To know more about electric field refer here :-
https://brainly.com/question/30544719#
#SPJ11
It is desired to magnify reading material by a factor of 3.5 times when a book is placed 8.0 cm behind a lens.
a) Describe the type of image this would be.
b) What is the power of the lens?
The image would be a virtual, upright image and the power of the lens is approximately 4.4 diopters.
What is the type of image and power of a lens?a) When a book is placed 8.0 cm behind a lens and it is desired to magnify the reading material by a factor of 3.5 times, the resulting image would be a virtual and upright image.
b) To find the power of the lens, we can use the lens equation:
1/f = 1/di + 1/do
where f is the focal length of the lens, di is the image distance, and do is the object distance.
Since the image is virtual and upright, di is negative. We can use the magnification equation to relate the object distance to the image distance:
M = -di/do
where M is the magnification.
Since the magnification is given as 3.5, we have:
di/do = 3.5
Solving for di in terms of do, we get:
di = -3.5 do
Now we can substitute this expression for di into the lens equation:
1/f = 1/di + 1/do
1/f = -1/3.5do + 1/do
1/f = (1/3.5 - 1) / do
1/f = -0.57 / do
Solving for f, we get:
f = -1.75/do
Now we can use the given object distance of 8.0 cm to find the power of the lens:
f = -1.75/0.08 = -21.875
The power of the lens is therefore +21.875 diopters, or approximately +22 diopters (since diopters are the unit of measurement for lens power).
Learn more about Lens
brainly.com/question/766997
#SPJ11
If the wet-bulb and dry-bulb temperature are both 80°F, what is the humidity? a. 0% b. 50% c. 75% D. 100%. D. 100%.
The humidity cannot be determined solely based on the wet-bulb and dry-bulb temperatures. The wet-bulb and dry-bulb temperatures provide information about the air temperature and the potential for evaporation, but they do not directly indicate the humidity.
Humidity refers to the amount of water vapor present in the air relative to the maximum amount it can hold at a specific temperature. To determine the humidity, additional information such as the dew point or specific humidity is needed.
Therefore, based on the given information of both the wet-bulb and dry-bulb temperatures being 80°F, we cannot determine the humidity. The correct answer would be "Cannot be determined."
To know more about refer here
https://brainly.com/question/30672810#
#SPJ11
How many moles of gas are there in a 50.0 L container at 22.0°C and 825 torr? a. 0.603 b. 18.4 c. 2.24 d. 1.70 X 103 e. 2.29 X 104
In the given statement, 2.24 moles of gas are there in a 50.0 L container at 22.0°C and 825 torr.
To answer this question, we need to use the ideal gas law: PV = nRT, where P is pressure, V is volume, n is the number of moles of gas, R is the gas constant, and T is temperature. Rearranging this equation to solve for n, we get:
n = PV/RT
Plugging in the given values, we get:
n = (825 torr) * (50.0 L) / [(0.08206 L atm/mol K) * (295 K)]
n = 2.24 moles
Therefore, the answer is option c, 2.24 moles. This is because the number of moles of gas is directly proportional to the volume of the container, and inversely proportional to the pressure and temperature. By using the ideal gas law and plugging in the given values, we can calculate the number of moles of gas in the container.
To know more about moles visit:
brainly.com/question/20486415
#SPJ11
A black hole probably exists at the galactic center because:
A black hole likely exists at the galactic center because of strong gravitational forces, observed rapid movement of stars, and powerful X-ray emissions.
A black hole is a region of spacetime exhibiting such strong gravitational effects that nothing can escape from it, not even light. The most compelling evidence for the existence of a black hole at the center of our galaxy comes from the observation of the rapid movement of stars in that region. These stars orbit around an invisible massive object, which is believed to be a supermassive black hole named Sagittarius A*.
Additionally, powerful X-ray emissions detected from the galactic center indicate the presence of a black hole, as these emissions are typical of matter being heated and compressed as it falls into a black hole.
Learn more about gravitational forces here:
https://brainly.com/question/12528243
#SPJ11
2. using sound, balanced nuclear equation/reaction and principle only, explain (a) "how does ki work to help mitigate the effect of exposure to radiation?
Ki works by inhibiting the activity of certain enzymes, which in turn reduces the damage caused by ionizing radiation to DNA.
Ki, also known as Kinase Inhibitor, is a type of molecule that can interact with enzymes called protein kinases, which play a crucial role in the cellular response to radiation-induced DNA damage. When exposed to ionizing radiation, these enzymes can activate pathways that lead to cell death or mutations in DNA, which can increase the risk of cancer.
Ki molecules work by binding to specific protein kinases and blocking their activity, which prevents them from triggering these harmful pathways. This allows the cell to repair the DNA damage or undergo programmed cell death, which can reduce the risk of cancer development.
A balanced nuclear equation/reaction for this process is not applicable since it involves molecular interactions at the cellular level rather than nuclear processes.
learn more about radiation here:
https://brainly.com/question/4072364
#SPJ11
A hollow cylindrical conductor of inner radius 0.00650 m and outer radius 0.0293 m carries a uniform current of 3.00 A. What is the current enclosed by an Amperian loop of radius 0.0182 m? I need the answer in ampere's
The current confined by the Amperian loop of radius 0.0182 m is about 1.99 A.
The Amperian loop encloses a cylindrical volume of the conductor with a radius between 0.0065 m and 0.0182 m. To find the current enclosed by the loop, we need to calculate the total current passing through this cylindrical volume.
The current density J (current per unit area) is uniform across the cross-section of the conductor, and its magnitude is given by:
J = I/A
where I is the current passing through the conductor, and A is the cross-sectional area of the conductor.
The cross-sectional area of the conductor is the difference between the areas of the outer and inner cylinders:
A = π(r_outer² - r_inner²)
Substituting the given values, we get:
A = π(0.0293² - 0.0065²) = 0.00148058 m²
The total current passing through the cylindrical volume enclosed by the Amperian loop is:
I_enclosed = J × A_enclosed
where A_enclosed is the area enclosed by the loop, given by:
A_enclosed = πr²
Substituting the given values, we get:
A_enclosed = π(0.0182²) = 0.00104228 m²
Substituting the values we found, we get:
I_enclosed = J × A_enclosed = (3.00 A / 0.00148058 m²) × 0.00104228 m² ≈ 1.99 A
Therefore, the current enclosed by the Amperian loop of radius 0.0182 m is approximately 1.99 A.
Learn more about current on:
https://brainly.com/question/1100341
#SPJ11
The Hubble Space Telescope (HST) orbits Earth at an altitude of 613 km. It has an objective mirror that is 2.40 m in diameter. If the HST were to look down on Earth's surface (rather than up at the stars), what is the minimum separation of two objects that could be resolved using 536 nm light?
The minimum separation that can be resolved is: separation >= (536 nm) / (2 x 2.40 m) = 111 nm.
The minimum separation of two objects that can be resolved by a telescope is given by the Rayleigh criterion, which states that the separation must be greater than or equal to the wavelength of the light divided by twice the aperture of the telescope.
In this case, the wavelength is 536 nm (or 5.36 x 10^-7 m) and the aperture is 2.40 m. Therefore, the minimum separation that can be resolved is: separation >= (536 nm) / (2 x 2.40 m) = 111 nm.
This means that any two objects that are closer than 111 nm cannot be resolved by the HST when observing Earth's surface.
To know more about Rayleigh criterion, refer here:
https://brainly.com/question/20113743#
#SPJ11