A student dissolves of sodium hydroxide in of water in a well-insulated open cup. He that observes the temperature of the water rise from to over the course of minutes. Use this data, and any information you need from the ALEKS Data resource,
NaOH(s) rightarrow Na+(aq) + OH-(aq)
You can make any reasonable assumptions about the physical properties of the solution. Note for advanced students: it's possible the student did not do the experiment carefully, and the values you calculate may not be the same as the known and published values for this reaction.
1. Is this reaction exothermic, endothermic, or neither.
2. If you said the reaction was exothermic or endothermic, calculate the amount of neat that was released or absorbed by the reaction in this case.
3. Calculate the reaction enthalpy AW per mole of NaOH.

Answer:

2-pentene

hope this helps :)

Explanation:

Answer:

We know that there are 6.022 * 10²³ atoms in 1 mole of any element

So, that means that there are 6.022 * 10²³ atoms in 1 mole of Li (Lithium)

Atoms in 3.7 Moles:

atoms in one mole = 6.022 * 10²³

atoms in 3.7 moles = 6.022 * 10²³ * 3.7

atoms in 3.7 moles = 22.28 * 10²³

atoms in 3.7 moles = 2.228 * 10²⁴

Answer:

A. because salt : Na and Cl, not C

Answer:

30 grams

Explanation:

density = mass / volume => mass = density x volume

mass = 0.856 g/cm³  x  35 cm³ = 29.96 grams ≅ 30 grams 2 sig. figs.  

Answer:

The wallet is falling from a height of 1450 m

We are given that:

downward acceleration (a) = 10 m/s/s

downward displacement (s) = 1450 m

downward initial velocity (u) = 0 m/s (Since the wallet was dropped, it had no initial velocity)

horizontal initial velocity (v) = 13 m/s

Since there is no external force being applied on the wallet except the force of gravity, the wallet will keep moving at a constant velocity of 13 m/s

To calculate the horizontal distance travelled by the wallet, we need to know how long the wallet was airborne

To calculate how long the wallet was airborne, we have to find out that how long it took the wallet to hit the ground

Time taken for the wallet to hit the ground:

From the second equation of motion:

s = ut + 1/2 at² ------------(for vertical motion of the wallet)

1450 = (0)(t) + 1/2 (10)(t)²

1450 = 5t²

t² = 290

t = 17 (approx)

Time taken for the wallet to hit the ground = 17 seconds

Horizontal distance travelled by the wallet:

Since the wallet hits the ground after 17 seconds, it will move horizontally at a constant velocity of 13 m/s for 17 seconds

horizontal acceleration = 0 m/s/s

From the second equation of motion:

s = ut + 1/2at²

s = ut + 1/2 (0)t²

s = ut

here, u is the horizontal initial velocity of the wallet and the time taken by the wallet to hit the ground is 't'

s = (13)(17)

s = 221 m

Hence, the horizontal distance travelled by the wallet while falling from a height of 1450 m is 221 m

Answer:

Specific heat of aluminum  = 0.27 j/g.°C

Explanation:

Given data:

Mass of Al = 100 g

Initial temperature = 108.4°C

Final temperature = 68.2°C

Heat released = -1080 j

Specific heat of aluminum = ?

Solution:

Formula:

Q = m.c. ΔT

Q = amount of heat absorbed or released

m = mass of given substance

c = specific heat capacity of substance

ΔT = change in temperature

ΔT =  68.2°C -  108.4°C

ΔT = - 40.2°C

Q = m.c. ΔT

-1080 j = 100 g ×c ×- 40.2°C

-1080 j = -4020 g.°C ×c

c = -1080 j/-4020 g.°C

c = 0.27 j/g.°C

Answer:

He, Cl, As, C, Na

Explanation:

^^

Answer: do not know how to answer this

Explanation:

Answer: Membrane Protiens

Explanation:

In facilitated diffusion, molecules diffuse across the plasma membrane with assistance from membrane proteins, such as channels and carriers. A concentration gradient exists for these molecules, so they have the potential to diffuse into (or out of) the cell by moving down it.

Answer:

7

Explanation:

Let x represent the number of moles of water in the hydrated salt i.e MgSO₄.xH₂O

The following data were obtained from the question:

Mass of MgSO₄.xH₂O = 1.547 g

Mass of anhydrous MgSO₄ = 0.7554 g

Mole of H₂O = x =?

Next, we shall determine the mass of water, H₂O in the hydrated salt, MgSO₄.xH₂O. This can be obtained as follow:

Mass of MgSO₄.xH₂O = 1.547 g

Mass of anhydrous MgSO₄ = 0.7554 g

Mass of H₂O =?

Mass of H₂O = (Mass of MgSO₄.xH₂O) – (Mass of anhydrous MgSO₄)

Mass of H₂O = 1.547 – 0.7554

Mass of H₂O = 0.7916 g

Finally, we shall determine the value of the x as illustrated below:

Mass of MgSO₄.xH₂O = 1.547 g

Molar mass of MgSO₄.xH₂O = 24 + 32 + (16×4) + x[(2×1) + 16]

= 24 + 32 + 64 + x(2 + 16)

= 120 + 18x

Mass of H₂O = 0.7916 g

Molar mass of xH₂O = 18x

Molar Mass of xH₂O/ Molar mass of MgSO₄.xH₂O = mass of xH₂O /Mass of MgSO₄.xH₂O

18x/ 120 + 18x = 0.7916/1.547

Cross multiply

0.7916 (120 + 18x) = 18x × 1.547

94.992 + 14.2488x = 27.846x

Collect like terms

94.992 = 27.846x – 14.2488x

94.992 = 13.5972x

Divide both side by 13.5972

x = 94.992 / 13.5972

x = 7

Thus, the formula for the hydrated salt, MgSO₄.xH₂O is MgSO₄.7H₂O

Number of moles of water, H₂O in the hydrated salt MgSO₄.7H₂O is 7.

The number of moles of attached water molecules is 7.

Mass of hydrated MgSO4 = 1.547 grams

Mass of anhydrous MgSO4 = 0.7554 grams

Number of moles of hydrated MgSO4 = 1.547 grams/120 + 18x

Number of moles of anhydrous MgSO4 = 0.7554 grams /120

Number of moles of anhydrous salt = Number of moles of hydrated salt

0.7554 grams /120 = 1.547 grams/120 + 18x

0.7554(120 + 18x) = 1.547 × 120

90.6 + 13.6x = 185.6

185.6 - 90.6 /13.6 = x

x = 7

The number of moles of attached water molecules is 7.

Learn more about water molecules:https://brainly.com/question/1195122

Answer:

The orange-and-white clownfish you know from Hollywood is only one of 30 species of clownfish that live in coral reefs around the world; small in size and big in personality, these tiny comedians have one of the most unique lifestyles in the reef. The orange-and-white clownfish you know from Hollywood is only one of 30 species of clownfish that live in coral reefs around the world; small in size and big in personality, these tiny comedians have one of the most unique lifestyles in the reef.

Explanation:

point being, it would be absolutely terrible

Coral reef are the biggest biodiversity in the world. Therefore, destruction of coral reefs definitely affect the aquatic livings. As well as it leads to erosion of seashore lines.

Corals reefs are the habitat of 25% of sea organisms. It means there are well over a million species that rely on coral reefs for their existence. The reef offers these organisms the vital food, habitat, and breeding grounds required for the survival of their species.

The marine biodiversity would suffer greatly if their homes vanished. And many fish, turtles, and other species would vanish in a domino-like fashion.

Coral reefs are threatened by a number of things, such as local threats like overfishing, destructive fishing methods, coastal development, pollution, and careless tourism, as well as global effects of climate change like warming seas and rising CO₂ levels in the water. Natural phenomena like hurricanes, El Nio, and diseases are also a threat to oral reefs.

Find more on coral reefs:

https://brainly.com/question/364711

#SPJ6

Answer:

mountain, mountain range, mountain system, mountain belt

Explanation:

edge 2021

Answer: In a closed system, only energy can be exchanged between the system and the surroundings. In the same example of boiling a pot of water, putting the lid on the system changes it from open to closed. This is because when the lid is on the pot, matter can no longer escape.

Explanation:

Answer:

I think its closed

Explanation:

Sorry if its wrong

Explanation:

from

de Broglie wavelength= h/ mv

substitute the values

joules= mass(kg) × acceleration (m/s^2) × distance(m)= kgm^2/s^2.

sorry I don't have my calc with me

According to De Broglie's Hypothesis, matter has both particle and wave properties. The wavelength of De Broglie is given as λ = h p,

wavelength (in m) of a proton =  11.09 x[tex]10^ {-55[/tex] m.

λ= h m v.

= 6.63 x [tex]10^{-34}[/tex] x  1.673 x [tex]10^{-24[/tex]x 1000

= 11.09 x[tex]10^ {-55[/tex] m

To learn more about :  De Broglie's Hypothesis

Ref :  https://brainly.com/question/10433847

#SPJ2

Answer:

all of the above

Explanation:

The solubility of an ionic solid in a liquid solvent largely depends on three factors:

i) The solvation energy

ii) The lattice energy of the solid

iii) The polarity of the of the solvent

A large solvation energy and a small magnitude of lattice energy means that the ionic solute will dissolve very easily in the solvent.

Secondly, the solvent must have a large polarity, this is why water serves as a good solvent for most ionic solutes.

Answer:

3.80 × 10²⁴ atoms of F

Explanation:

Step 1: Given data

Moles of barium fluoride (BaF₂): 3.16 mol

Step 2: Calculate the moles of fluorine in 3.16 moles of barium fluoride

The molar ratio of BaF₂ to F is 1:2. The moles of F in 3.16 moles of BaF₂ are 2/1 × 3.16 mol = 6.32 mol.

Step 3: Calculate the atoms of F in 6.32 moles of F

We will use Avogadro's number: there are 6.02 × 10²³ atoms of F in 1 mole of atoms of F.

6.32 mol × (6.02 × 10²³ atom/1 mol) = 3.80 × 10²⁴ atom

Answer:

Explanation:

In my opinion the answer should be SO2

Answer:

a should be answer i think.

Answer:

Kindly check the attached picture.

Explanation:

Titration is one of the useful concept or practical in chemistry which is used in the determination of the concentration of a particular chemical specie. Without mincing words, let us dive straight into the solution to the question;

(a) Determining the equivalence point using the graph.

=> The equivalence point is the point at which there has been been "enough" addition of the acid to the base to give us the congugate acid. In the diagram showing the curve, it is the point labelled (a).

(b)The next thing is to determine the region with maximum buffering.

=> The position with the maximum buffering ranges from the point labelled (b) in the graph and it is the point when the acid and the base has been added. But the point with the maximum buffering is labeled as point (c).

(c). Determination of the point where pH = pKb.

=> The Point in which the pH = pKb is the point a

(d). The region where pH depends only on [B].

=> The starting point in the point in which the pH is dependent on the concentration of the base, [B].

(e). The region where pH depends only on [BH+].

=> This is the same point with point labelled as (a). Thus, point (a) and (e) are the same.

(f). The region where pH depends only on the amount of excess strong acid is the point labelled as (f) which is known as the post equivalence point.

Answer:

LA PRIMERA ES N

Explanation:

Answer:

The solution to this question can be defined as follows:

Explanation:

Answer:

0.296j/g⁰c

Explanation:

we have the following information from this question before us.

mass iv substance = 50grams

we have initial temperature ti = 20.2⁰c

final temperature = 125⁰c

the energy that was provided = 155kj

we proceed with this formula

energy = mcΔT

1.55x10³ = 50 x c x (125-20.2)

1.55x10³ = c x 50gm x 104.8k

we divide through to get c

c = 1.55x10³/50g x 104.8

c = 0.296J/g⁰c

that is the specific heat of this substance.

thank you!

Answer:

Explanation:

The density of a substance can be found by using the formula

[tex]density = \frac{mass}{volume} \\ [/tex]

volume = final volume of water - initial volume of water

volume = 60 - 25 = 35 mL

From the question we have

[tex]density = \frac{140}{35} \\ [/tex]

We have the final answer as

Hope this helps you

Answer:

[tex]Ka_1=1.61x10^{-3}[/tex]

[tex]Ka_2=1.01x10^{-8}[/tex]

Explanation:

Hello.

In this case, since the stepwise dissociation of malonic acid which is a diprotic acid that we are going to symbolize by H₂A, is:

[tex]H_2A\rightleftharpoons H^++HA^-;Ka_1\\\\HA^-\rightleftharpoons H^++A^-;Ka_2[/tex]

The first ionization has the following equilibrium expression:

[tex]Ka_1=\frac{[H^+][HA^-]}{[H_2A]}[/tex]

Whereas the concentration of H⁺ equals the concentration of HA⁻ and is computed via the pH:

[tex][H^+]=[HA^-]=10^{-pH}=10^{-1.47}=0.0339M[/tex]

Next, we compute the molarity of the 19.5 g of malonic acid (molar mass = 104.06 g/mol) as shown below:

[tex][H_2A]=\frac{19.5g/(104.06 g/mol)}{0.250L}=0.750M[/tex]

Thus, Ka1 turns out:

[tex]Ka_1=\frac{(0.0339)(0.0339)}{0.750-0.0339}=1.61x10^{-3}[/tex]

Now, for the second ionization, since the 0.300-M sodium hydrogen malonate is the source of HA⁻, and the pH is 4.26, we can compute the concentration of both H⁺ and A⁻² again by considering the pH:

[tex][H^+]=[A^-^2]=10^{-4.26}=5.50x10^{-5}M[/tex]

Therefore Ka2 turns out:

[tex]Ka_2=\frac{[H^+][A^{-2}]}{[HA^-]}=\frac{(5.50x10^{-5})(5.50x10^{-5})}{0.300-(5.50x10^{-5})}\\ \\Ka_2=1.01x10^{-8}[/tex]

Best regards!

Answer:

0.75

Explanation:

3/4=0.75 so therefore its 0.75

Answer:

0.75 moles of CO2

Explanation:

molar mass of CO2⇒ 44.01 g/mol

molar mass Oxygen ⇒ 31.998 g/mol

divide the mass given by molar mass of oxygen  so

48÷31.998= 1.50009376 moles of O

then you use the ration of oxygen to carbon to find the moles of CO2 which is one mole of CO2 for 2 moles of oxygen

1.50009376 moles of O ×[tex]\frac{1}{2}[/tex] = 0.75004688

with sig figs

0.75 moles of CO2

Answer:

371km

Explanation:

the lower the more fuel there is

Answer:

Explanation:

Answer:

[a]. 55.5kmol/min.

[b]. The average velocity = 8.3m/s.

pipe diameter = 1.0954m.

Explanation:

So, from the question above we are given the following data or information or parameters which are going to help us in solving the above question;

=> ''A gas stream that contains 1.50 mole% CO2 flows through a pipeline''

=> ''Twenty (20.0) kilograms of CO2 per minute is injected into the line.''

=> '' . A sample of the gas is drawn from a point in the line 150 meters downstream of the injection point and found to contain 2.3 mole% CO2''

=> ''molar gas density is 0.123k mol/m3''

[a].The gas flow rate (k mol/min) upstream of the injection point can be calculated as follows.

- Determine the mass balance= j₁ +[ 20 /.123 × 44] = j₃. Thus, the flow gas rate is given as;

w₁ ×  1.50 mole% CO2 + 3.6954= 2.3 mole% CO2 × w₃.

-3.610 = - 0.008w₁.

w₁ = 451.3 m³/min.

Thus, the flow rate = 0.123 × 451.3 = 55.51 kmol/min.

[b]. The average velocity = 150/ 18 seconds = 8.3 m/s.

[c]. Pipe Diameter can be calculated as follows;

0.123  × 8.3  × [3.12  × (pipe diameter)² / 4] = 55.51/60.

[1.0209  × 3.12]/4  × [pipe diameter]² = 0.9252.

0.8014065  ×  [pipe diameter]² = 0.9252.

[pipe diameter]² = 0.9252/ .8014065.

[pipe diameter]² = 1.15443.

[pipe diameter] = √1.15443.

[pipe diameter] = 1.2 m² = 1.0954m.

A) The gas flow rate (k.mol/min) upstream of the injection point is;

55.51 k.mol/min

B) The average velocity and the diameter of the pipe are respectively;

8.33 m/s and 1.072 m

Due to the fact that there is no reaction or accumulation in the pipeline, we can say that the input of CO₂ is equal to it's output. Thus;

Upstream + Injection = Downstream

A) If we assume that x is the flow rate of gas (kmol/min), then there is the we can write the balance as:

0.015x + (20/44) = 0.023(x + 20/44)

Expanding gives us;

0.015x + 0.4545 = 0.023x + 0.01045

Solving for x gives;

x = 55.51 kmol/min

B) Formula for velocity is;

v = distance/time

Thus, since the length of the pipe is 150 m/s and time is 18 seconds, then velocity is;

v = 150/18

v = 8.33 m/s

Now, volumetric flow rate is calculated from;

Q = q' * ρ

where;

q' is gas flow rate

ρ is gas density

Thus;

Q = 55.51 * 0.123

Q = 451.3 m³/min = 7.522 m³/s

We can also express average velocity as;

v = Q/A

where A is area = πD²/4

Thus;

8.33 = 7.522/(πD²/4)

Making D the subject of the formula gives;

D = √((4 * 7.522)/(8.33π))

D = 1.072 m

Read more about Gas flow rate at; https://brainly.com/question/16014998