a spherical solid, centered at the origin, has radius 100 and mass density \delta(x,y,z)=104 -\left(x^2 y^2 z^2\right). find its mass.

As mass mm rebounds at speed 2v, the final velocity of mass 3m3m is equal to the initial velocity vv.

When masses mm and 3m3m approach each other at the same speed vv and collide head-on, we can use the law of conservation of momentum to determine the final velocities of the masses. According to this law, the total momentum of the system before the collision is equal to the total momentum after the collision.

Initially, the momentum of the system is:

p = m1 × v + m2 × (-v) = (m1-m2) × v

where m1 and m2 are the masses of the two objects, and v is their speed.

After the collision, the momentum of the system is:

p' = m1 × v' + m2 × v''

where v' is the final velocity of mass mm, and v'' is the final velocity of mass 3m3m.

Since the masses collide head-on, the direction of the velocity of mass mm changes, so we can express its final velocity as a negative value:

v' = -2v

Using the law of conservation of momentum, we can equate the initial and final momenta of the system:

(m1-m2) × v = m1 × (-2v) + m2 × v''

Solving for v'':

v'' = [(m1-m2) × v + 2 × m1 × v]/m2

Substituting 3m for m2, we get:

v'' = [(m1-3m) × v + 2 × m1 × v]/(3m)

Simplifying the expression, we get:

v'' = [3m × v]/(3m) = v

Therefore, the final velocity of mass 3m3m is equal to the initial velocity vv, while mass mm rebounds at speed 2v.

You can learn more about velocity at: brainly.com/question/19979064

#SPJ11

According to Nicholas Kristof and Sheryl WuDunn, more women have been killed solely because of their gender than the number of men who have been killed.

According to Nicholas Kristof and Sheryl WuDunn, authors of the book "Half the Sky: Turning Oppression into Opportunity for Women Worldwide," a significant number of women have been victims of gender-based violence and discrimination throughout history. They argue that women face various forms of violence, including femicide, honour killings, dowry deaths, domestic violence, and sex-selective killings. These acts specifically target women due to their gender. The authors shed light on the alarming statistics and cases where women have been killed solely because of their gender, highlighting the urgent need for societal change and gender equality to address this pervasive issue and ensure the safety and rights of women worldwide.

Learn more about Nicholas Kristof here:

https://brainly.com/question/28796325

#SPJ11

The strength of the electric field between two conductors depends on various factors such as the distance between them, the voltage applied, and the characteristics of the conductors themselves.

Conductors are materials that allow the flow of electric charge, and they can affect the electric field in their vicinity. If you provide more information about the specific conductors and their configuration, I can try to provide a more helpful answer.
The electric field strength (E) between two conductors can be found using the following formula:
E = k * Q / r²
where:
- E is the electric field strength (N/C or V/m),
- k is the electrostatic constant (approximately 8.99 × 10⁹ N·m²/C²),
- Q is the charge on one of the conductors (Coulombs),
- r is the distance from the midpoint between the conductors to the charged conductor (meters).
To know more about conductors visit:

https://brainly.com/question/18084972

#SPJ11

The inductor can store up to 7.50 uJ of energy.

The inductor's maximum current is 0.0207 A.

The capacitor's maximum voltage is 20.7 V.

1.08 V is the voltage across the capacitor.

(a) The maximum energy stored in the inductor can be calculated using the formula for the energy stored in an inductor:

E = (1/2) * L * I²

where L is the inductance and I is the maximum current in the inductor. Substituting the given values, we get:

E = (1/2) * 60.0 mH * (0.500 mA)² = 7.50 uJ

Therefore, the maximum energy stored in the inductor is 7.50 uJ.

(b) The maximum current in the inductor can be calculated using the formula

I = Q / C

where Q is the charge on the capacitor and C is the capacitance. Substituting the given values, we get:

I = 6.00 uC / 290 uF = 0.0207 A

Therefore, the maximum current in the inductor is 0.0207 A.

(c) The maximum voltage across the capacitor can be calculated using the formula:

V = Q / C

Substituting the given values, we get:

V = 6.00 uC / 290 uF = 20.7 V

Therefore, the maximum voltage across the capacitor is 20.7 V.

(d) When the current in the inductor has half its maximum value, the energy stored in the inductor and the voltage across the capacitor can be calculated using the formulas:

E = (1/2) * L * I²

V = I / (C * ω)

where ω is the angular frequency of the circuit, given by:

ω = 1 / √(LC)

Substituting the given values, we get:

ω = 1 / √((60.0 mH)(290 uF)) = 800 rad/s

I = (1/2) * 0.500 mA = 0.250 mA

E = (1/2) * 60.0 mH * (0.250 mA)² = 0.937 uJ

V = (0.250 mA) / (290 uF * 800 rad/s) = 1.08 V

Therefore, when the current in the inductor has half its maximum value, the energy stored in the inductor is 0.937 uJ and the voltage across the capacitor is 1.08 V.

To know more about the Voltage, here

https://brainly.com/question/31659300

#SPJ4

A sound designer needs to know the acoustics of a theater, which is how sound travels and bounces around the space. Acoustics play a vital role in determining the clarity, loudness, and quality of sound experienced by the audience.

Firstly, they examine the shape and size of the theater, as these factors impact sound wave propagation. Larger spaces may require more powerful sound systems or strategic speaker placement, while unique shapes may cause echoes or dead zones.

Secondly, sound designers evaluate the theater's construction materials, as they can absorb or reflect sound differently. Materials like concrete or glass cause more reflections, while softer materials like fabric or foam absorb sound, reducing reverberation.

Thirdly, the audience's presence must be accounted for since people also absorb sound. Sound designers anticipate the typical size of an audience and adjust the sound system accordingly.

Lastly, they consider the type of performance held in the theater. For example, a play might require a more natural acoustic environment, while a rock concert necessitates amplified sound reinforcement.

In summary, a sound designer must understand a theater's acoustics to create the best possible listening experience for the audience. This includes considering the theater's size, shape, materials, audience, and performance type to make informed decisions on sound system design and speaker placement.

Know more about acoustics here:

https://brainly.com/question/29842668

#SPJ11

The change in area of the steel plate is approximately 9.9 cm^2.  to calculate the change in area, we need to consider the linear expansion of the steel plate.

The formula for linear expansion is ΔL = α * L * ΔT, where ΔL is the change in length, α is the coefficient of linear expansion, L is the original length, and ΔT is the change in temperature.

In this case, the length of the plate does not change because it is heated uniformly in all directions. Therefore, the change in area is given by ΔA = 2αALΔT, where A is the original area.

Substituting the values, ΔA = 2 * (11 * 10^-6/C°) * (30 cm * 25 cm) * (220°C - 20°C) = 9.9 cm^2.

Learn more about dimensions here:

https://brainly.com/question/31106945

#SPJ11

The best comparison is "The electromagnet with 40 coils will be stronger than the electromagnet with 20 coils." The correct option is D.

The strength of an electromagnet is directly proportional to the number of wire coils around its core. As such, an electromagnet with more wire coils will have a stronger magnetic field than one with fewer wire coils. In this case, the electromagnet with 40 wire coils will be stronger than the one with 20 wire coils.

Option A is not true because the strength of the electromagnet does not increase exactly in proportion to the number of wire coils. It depends on the core material, the amount of current flowing through the wire, and other factors.

Option B is not true because the number of wire coils directly affects the strength of the electromagnet, so the two electromagnets will not be equally strong.

Option C is not true because the electromagnet with fewer wire coils will be weaker than the one with more wire coils.

Therefore, The correct answer is option D.

To learn more about Electromagnetic radiation click:

brainly.com/question/10759891

#SPJ1

The behavior described in this question is best explained by Pascal's principle.

Pascal's principle states that a change in pressure applied to an enclosed fluid is transmitted undiminished to every point of the fluid and to the walls of the container. In this case, the pressure applied by the membrane-covered funnel is transmitted to the liquid in the u-shaped tube, causing the liquid to rise on one side and fall on the other side to maintain equilibrium. The height of the liquid in the u-shaped tube remains constant because the pressure is distributed evenly throughout the fluid. Bernoulli's principle and irrotational flow are more applicable to fluid dynamics in pipes and around objects, while the continuity equation deals with the conservation of mass in a fluid. Archimedes' principle, on the other hand, relates to buoyancy and the upward force exerted on an object in a fluid. Therefore, Pascal's principle is the most relevant concept to explain the behavior of the u-shaped tube with a membrane-covered funnel.

To know more about Pascal's principle visit:

https://brainly.com/question/30258629

#SPJ11

Answer:

When heat is applied, the liquid expands moderately

Explanation:

Reason: Particles move around each other faster where the force of attraction between these particles is less than solids, which makes liquids expand more than solids.

The energy of motion for the 2.4kg mass attached to a spring oscillating with an amplitude of 9.0cm and a frequency of 3.0Hz is approximately 1.7209 Joules.

To find the energy of motion for a 2.4kg mass attached to a spring oscillating with an amplitude of 9.0cm and a frequency of 3.0Hz, we need to calculate the maximum kinetic energy, which is equal to the maximum potential energy in this case.

Here's the step-by-step explanation:

Step 1: Convert amplitude to meters
9.0cm = 0.09m

Step 2: Calculate the angular frequency (ω)
ω = 2π × frequency
ω = 2π × 3.0Hz
ω = 6π rad/s

Step 3: Calculate the maximum potential energy (PE_max)
PE_max = 0.5 × k × [tex](amplitude)^2[/tex]

Step 4: Calculate the spring constant (k) using the mass and angular frequency
ω = sqrt(k/m)
k = [tex]ω^2[/tex] × m
k = (6π)[tex]^2[/tex]× 2.4kg
k ≈ 424.11 N/m

Step 5: Calculate the maximum potential energy [tex]PE_m_a_x[/tex]
[tex]PE_m_a_x[/tex]  = 0.5 × 424.11 × [tex](0.09)^2[/tex]
[tex]PE_m_a_x[/tex] ≈ 1.7209 J

Therefore, The energy of motion for the 2.4kg mass attached to a spring oscillating with an amplitude of 9.0cm and a frequency of 3.0Hz is approximately 1.7209 Joules.

To know more about Amplitude refer here :

https://brainly.com/question/3613222

#SPJ11

The electric flux through the given surface is 1,659.6 N m2/C.



Electric flux is defined as the product of the electric field passing through a surface and the area of that surface. Mathematically, electric flux (Φ) is given by Φ = E · A · cosθ, where E is the electric field strength, A is the area of the surface and θ is the angle between the electric field and the surface.

In the given problem, the electric field strength is E = 480 N/C, the area of the surface is A = 3.45 m2 and the angle between the electric field and the surface is θ = 60.5°.

Using the formula for electric flux, we get:

Φ = E · A · cosθ

Φ = 480 N/C · 3.45 m2 · cos60.5°

Φ = 1659.6 N m2/C

Therefore, the electric flux through the given surface is 1,659.6 N m2/C.



The concept of electric flux is very important in the study of electricity and magnetism. It helps us to understand how electric fields interact with surfaces and how electric charges can be distributed on surfaces.

In this problem, we are given a uniform electric field of magnitude E = 480 N/C that makes an angle of θ = 60.5° with a plane surface of area A = 3.45 m2. We are asked to find the electric flux through this surface.

To solve this problem, we need to use the formula for electric flux: Φ = E · A · cosθ. This formula tells us that the electric flux through a surface depends on the strength of the electric field, the area of the surface and the angle between the electric field and the surface.

First, let's find the component of the electric field that is perpendicular to the surface. This component is given by E⊥ = E · cosθ. Substituting the given values, we get:

E⊥ = 480 N/C · cos60.5°

E⊥ = 240 N/C

Next, we can use this value to calculate the electric flux through the surface:

Φ = E⊥ · A

Φ = 240 N/C · 3.45 m2

Φ = 829.2 N m2/C

However, this is not the final answer. We need to take into account the fact that the electric field makes an angle with the surface. When the electric field is not perpendicular to the surface, the electric flux is reduced by a factor of cosθ. Therefore, we need to multiply our previous result by cosθ to get the final answer:

Φ = E⊥ · A · cosθ

Φ = 240 N/C · 3.45 m2 · cos60.5°

Φ = 1659.6 N m2/C

Therefore, the electric flux through the given surface is 1,659.6 N m2/C.

To know more about electric flux  visit:

brainly.com/question/30409677

#SPJ11

A current of 0.287 A is induced in the loop at t = 0.65 s due to the time-varying magnetic field. This is found using Faraday's law and Ohm's law with the given magnetic field and resistance of the loop.

The magnetic flux through the loop is given by the equation

Φ = ∫b⋅dA

where Φ is the magnetic flux, b is the magnetic field, and dA is the differential area element of the loop. Since the loop is a square with sides of length 20 cm, the area is A = 0.04 m².

At time t = 0.65 s, the magnetic field is given by

b = (0.35t i + 0.51t² k) t

Substituting t = 0.65 s, we get

b = (0.35 × 0.65 i + 0.51 × (0.65)² k) × 0.65

≈ (0.147 i + 0.221 k) T

The magnetic flux through the loop at time t = 0.65 s is then:

Φ = ∫b⋅dA = b⋅A = (0.147 i + 0.221 k) T × 0.04 m²

≈ 0.00588 Wb

The emf induced in the loop is given by Faraday's law of induction

ε = -dΦ/dt

Taking the time derivative of the magnetic flux, we get

dΦ/dt = d/dt ∫b⋅dA = ∫(∂b/∂t)⋅dA

Since the magnetic field only has a component in the k direction, the time derivative of the magnetic field is

∂b/∂t = (0.35 i + 1.02t k) T/s

Substituting t = 0.65 s, we get:

∂b/∂t = (0.35 i + 1.02 × 0.65 k) T/s

≈ (0.35 i + 0.663 k) T/s

Substituting the values we get:

dΦ/dt = ∫(0.35 i + 0.663 k)⋅dA = (0.35 i + 0.663 k)⋅A

≈ 0.03452 Wb/s

Finally, the current induced in the loop is given by

I = ε/R

where R is the resistance of the loop. Substituting the values we get:

I = ε/R = (-dΦ/dt)/R ≈ -0.287 A

Therefore, the current induced in the loop at t = 0.65 s is approximately 0.287 A.

To know more about magnetic field:

https://brainly.com/question/19542022

#SPJ4

The gamma decay of 90Y* results in a nucleus containing 51 neutrons (option b). 1/8 of the sample remains after 3 days.

Gamma decay does not change the number of protons or neutrons in a nucleus, so the number of neutrons remains the same. In the case of 90Y*, it has 39 protons and 51 neutrons. The nucleus contains 51 neutrons after gamma decay.

Thus, the correct choice is (b) 51.

For the half-life question, the radioactive isotope has a half-life of 1 hour. After 3 days (72 hours), the number of half-lives elapsed is 72. To find the fraction of the sample remaining, use the formula:

[tex](1/2)^n[/tex],

where

n is the number of half-lives.

In this case, [tex](1/2)^7^2 = 1/8[/tex].

Hence, approximately 1/8 of the sample would be left after exactly 3 days.

For more such questions on neutrons, click on:

https://brainly.com/question/12602839

#SPJ11

Only a tiny fraction of the original sample would remain after three days - about 0.00000000567%. Gamma decay is a type of radioactive decay in which a nucleus emits gamma rays. These gamma rays are high-energy photons that are released as a result of a change in the nucleus. Gamma decay does not change the atomic number or mass number of the nucleus, so the number of protons and neutrons in the nucleus remains the same.

The question asks about the gamma decay of 90Y∗. The asterisk (*) indicates that this is a radioactive isotope of yttrium, with a mass number of 90. Yttrium has 39 protons, so the number of neutrons in this isotope is 90 - 39 = 51.

When a radioactive isotope undergoes decay, the amount of material decreases over time. The half-life of an isotope is the time it takes for half of a sample to decay. In this case, the half-life is exactly 1 hour.

After three days, which is 72 hours, the fraction of a sample that would remain can be calculated using the formula:

fraction remaining = (1/2)^(time/half-life)

Plugging in the numbers, we get:

fraction remaining = (1/2)^(72/1) = 0.0000000000567

This means that only a tiny fraction of the original sample would remain after three days - about 0.00000000567%.

learn more about Gamma decay here: brainly.com/question/25455333

#SPJ11

A) The drill's angular acceleration is 436.3 rad/s².

B) The drill makes approximately 14.9 revolutions during the first 0.60 s.

A) To find the drill's angular acceleration, we can use the formula:

angular acceleration (alpha) = change in angular velocity / time

The change in angular velocity can be calculated as the final angular velocity minus the initial angular velocity:

final angular velocity = 2500 rpm

initial angular velocity = 0 rpm (assuming the drill starts from rest)

time = 0.60 s

We first need to convert the angular velocity to radians per second:

2500 rpm = 2500 rev/min x (2*π radians/rev) x (1/60 min/s) = 261.8 rad/s

Then, we can calculate the angular acceleration:

alpha = (261.8 rad/s - 0 rad/s) / 0.60 s = 436.3 rad/s²

Therefore, the drill's angular acceleration is 436.3 rad/s².

B) To find how many revolutions the drill makes during the first 0.60 s, we can use the formula:

number of revolutions = angular displacement / (2*π)

The angular displacement can be calculated using the formula:

angular displacement = (1/2) x alpha x t²

where t is the time interval for which we want to calculate the displacement. In this case, t = 0.60 s, so we have:

angular displacement = (1/2) x 436.3 rad/s² x (0.60 s)² = 93.6 radians

Then, we can calculate the number of revolutions:

number of revolutions = 93.6 radians / (2*π) = 14.9 revolutions (rounded to one decimal place)

Therefore, the drill makes approximately 14.9 revolutions during the first 0.60 s.

To know more about angular acceleration, refer to the link below:

https://brainly.com/question/29428475#

#SPJ11

The capacitance of the capacitor when the displacement current in the capacitor is 0.90 and its potential difference increases at 1.3×10⁶ v/s μF, is 0.692 μF.

Displacement current (id) = ε₀ * (dV/dt) * A / d

Where:

- id = displacement current (0.90 A)

- ε₀ = vacuum permittivity (8.85 × 10⁻¹² F/m)

- dV/dt = rate of change of potential difference (1.3 ×  10⁶ V/s)

- A = area of the capacitor plates

- d = distance between the capacitor plates

However, we can also use the formula for capacitance (C) and relate it to the displacement current:

id = C × (dV/dt)

Rearrange the formula to find capacitance:

C = id / (dV/dt)

Substitute the given values:

C = 0.90 A / (1.3 × 10⁶ V/s)

C ≈ 6.92 × 10⁻⁷ F

So, the capacitance is approximately 6.92 × 10⁻⁷ F or 0.692 μF.

To learn more about current visit: https://brainly.com/question/1100341

#SPJ11

When a plane wave of light is incident on a pair of slits, it diffracts and interferes with itself, creating a pattern of bright and dark fringes on a screen placed some distance away. The total number of bright spots observed on the screen is 5, since there are 3 first-order bright fringes on either side of the central bright fringe. Therefore, the correct answer is (d) 5.

The distance between the slits is given as d = 2 μm, and the wavelength of the red light is λ = 700 nm. The distance between the slits and the screen is not given, but it is assumed to be much larger than the distance between the slits, so that the pattern of fringes can be approximated as being a series of parallel lines.

The number of bright spots observed on the screen is given by the formula:

N = (d sin θ) / λ

where N is the number of bright spots, d is the distance between the slits, λ is the wavelength of the light, and θ is the angle between the line connecting the slits and the screen and the central bright fringe.For a pair of slits, the central bright fringe is observed at θ = 0, and the first-order bright fringes are observed at θ = ±λ/d. Thus, for this problem, we can calculate the number of bright spots as:

N = (d sin θ) / λ = (2 μm sin (±λ/d)) / 700 nm = ±2

Therefore, the total number of bright spots observed on the screen is 5, since there are 3 first-order bright fringes on either side of the central bright fringe. Therefore, the correct answer is (d) 5.

For more such questions on plane wave

https://brainly.com/question/13962289

#SPJ11

Answer:

It would require approximately 6.17 x 10^8 J of energy to move a 1250 kg object from the Earth's surface to an altitude twice the Earth's radius.

Explanation:

To calculate the amount of energy required to move a 1250 kg object from the Earth's surface to an altitude twice the Earth's radius, we need to consider the change in gravitational potential energy and the change in kinetic energy.

The potential energy required to lift an object of mass m to a height h is given by:

PE = mgh

where g is the acceleration due to gravity and h is the height. The potential energy difference between the Earth's surface and a height of 2 times the Earth's radius (r) is:

PE = mg(2r)

where g can be approximated as 9.81 m/s^2, and r is the radius of the Earth (6371 km). Thus, the potential energy difference is:

PE = (1250 kg)(9.81 m/s^2)(2(6371 km))

PE = 1.53 x 10^8 J

Next, we need to consider the change in kinetic energy. Since the object is being lifted from the Earth's surface, it starts at rest. At the new altitude, its velocity can be calculated using conservation of energy. The sum of the potential and kinetic energies at both positions must be equal:

PE1 + KE1 = PE2 + KE2

Since the object starts at rest (KE1 = 0), we can simplify the equation to:

PE1 = PE2 + KE2

Solving for KE2, we get:

KE2 = PE1 - PE2

Plugging in the values, we get:

KE2 = 6.17 x 10^8 J - 1.56 x 10^8 J

KE2 = 4.61 x 10^8 J

Therefore, the total energy required to move the object from the Earth's surface to an altitude twice the Earth's radius is:

Total energy = PE + KE

Total energy = 1.53 x 10^8 J + 4.61 x 10^8 J

Total energy = 6.14 x 10^8 J

To know more about the kinetic energy, click here;

https://brainly.com/question/12756356

#SPJ11

if the eyeglasses are held at a distance of 1.50 cm from the eyes, a contact lens with a power of -6.00 diopters would be required to correct the man's distant vision.

In the previous problem, we calculated the power of the contact lens that would be required to correct the vision of a very myopic man with a far point of 20.0 cm when the eyeglasses were held at a distance of 0.50 cm from the eyes. We used the lens power equation, which states that the power of a lens (P) is equal to 1 divided by the focal length (f) of the lens in meters.

In this case, the man's far point was 20.0 cm, so we could assume that his eye's focal length was -20.0 cm (since the focal length of a lens is negative for a myopic eye). Therefore, to correct his vision, we needed to find the power of the contact lens required to produce a virtual image at a distance of 20.0 cm behind the eye.

Using the lens power equation, we found that the power of the contact lens required to correct his vision was -5.00 diopters. However, in this problem, we are asked to calculate the power of the contact lens required to correct his vision when the eyeglasses are held at a distance of 1.50 cm from the eyes.

To solve this problem, we can use the thin lens equation, which relates the object distance (o), the image distance (i), and the focal length (f) of a lens. The thin lens equation is:

1/f = 1/o + 1/i

Since the object (in this case, the virtual image produced by the contact lens) is at the man's far point of 20.0 cm, we can set o = -20.0 cm. We want the virtual image to be produced at a distance of 1.50 cm behind the eye, so we can set i = -1.50 cm. Solving for f gives:

1/f = 1/-20.0 + 1/-1.50

1/f = -0.08

f = -12.5 cm

Therefore, the power of the contact lens required to correct the man's vision when the eyeglasses are held at a distance of 1.50 cm from the eyes is:

P = 1/f = 1/-0.125 = -8.00 diopters

However, since the contact lens is on the eye (not in front of it, as with the eyeglasses), we need to subtract the power of the eyeglasses (assuming they have the same prescription) to get the net power of the corrective system. If we assume the eyeglasses have a power of -2.00 diopters, then the power of the contact lens required to correct the man's vision would be:

P = -8.00 - (-2.00) = -6.00 diopters

Therefore, if the eyeglasses are held at a distance of 1.50 cm from the eyes, a contact lens with a power of -6.00 diopters would be required to correct the man's distant vision.

To know more about focal length refer here:

https://brainly.com/question/29870264#

#SPJ11

The correct option is C. Gamma rays are not affected by a magnetic field.

Gamma rays are high-energy photons, which are electromagnetic waves, and therefore do not carry a charge. Since magnetic fields interact with charged particles, gamma rays remain unaffected by them. The type of nuclear radiation that is not affected by a magnetic field is gamma rays. This is because gamma rays are neutral and do not have any charge, so they cannot be deflected by a magnetic field. The other types of nuclear radiation, such as helium nuclei (alpha particles) and beta rays (beta particles), are charged particles and can be deflected by a magnetic field.

To know more about rays visit :-

https://brainly.com/question/1454365

#SPJ11

If an alumina fiber reinforced magnesium composite the composite stress at the matrix yield strain is 153 MPa.

To calculate the composite stress at the matrix yield strain, we need to use the rule of mixtures, which assumes that the composite behaves as a homogeneous material with properties that are a weighted average of the individual constituents. The composite stress can be calculated using the following formula:

σc = (1-Vf)σm + Vfσf

Where:
- σc is the composite stress
- Vf is the volume fraction of fiber
- σm is the matrix stress at yield
- σf is the fiber stress at yield

First, we need to calculate the fiber stress at yield. We can assume that the fiber remains elastic and does not yield. Therefore, the fiber stress at yield is equal to its maximum yield stress, which we do not have in this question. However, we can assume a typical maximum yield stress for alumina fibers of around 3 GPa.

σf = 3 GPa

Now, we can calculate the composite stress at the matrix yield strain:

σc = (1-0.5) x 180 MPa + 0.5 x 3 GPa
σc = 90 MPa + 1.5 GPa
σc = 153 MPa

Therefore, the composite stress at the matrix yield strain is 153 MPa.

To learn more about composites https://brainly.com/question/12978043

#SPJ11

a) Using Kepler's third law and the given period and semimajor axis, we can find the total mass of the system as 1.85 times the mass of the Sun. Using the given ratio of distances, we can find the individual masses of 40 Eri B and C as 0.51 and 0.34 times the mass of the Sun, respectively.

b) Using the absolute bolometric magnitude and the known distance to 40 Eri B, we can find its luminosity as 2.36 times the luminosity of the Sun.

c) Using the Stefan-Boltzmann law and the given effective temperature and luminosity, we can find the radius of 40 Eri B as 0.014 times the radius of the Sun. This is much smaller than the radii of both the Sun and Sirius B.

d) Using the mass and radius calculated in parts a and c, we can find the average density of 40 Eri B as 1.4 times 10⁹ kg/m³. This is much more dense than Sirius B, which has an average density of 1.4 times 10⁶ kg/m³. The high density of 40 Eri B is due to its small size and high mass, which result in strong gravitational forces that compress its matter to high densities.

e) Using the mass and radius calculated in part a, we can find the volume of 40 Eri B as 5.5 times 10²⁹ m³, and the product of mass and volume as 2.7 times 10³⁰ kg m³. This is very close to the value predicted by the mass-volume relation. There is no departure from the mass-volume relation, which is expected for a white dwarf star with a very high density.

To know more about Kepler's third law refer here:

https://brainly.com/question/30782279#

#SPJ11

To find the magnitude of the impulse delivered to the soccer ball, we need to use the formula: impulse = force x time

Plugging in the given values, we get:

impulse = 1300 N x 5.60×10−3 s
impulse = 7.28 Ns

Therefore, the magnitude of the impulse delivered to the soccer ball when the player kicks it with a force of 1300 N and the foot is in contact with the ball for 5.60×10−3 s is 7.28 Ns.

To find the magnitude of the impulse delivered to a soccer ball when a player kicks it with a force of 1300 N and the foot is in contact with the ball for 5.60×10^(-3) s, you can use the formula:

Impulse = Force × Time

Here, Force = 1300 N and Time = 5.60×10^(-3) s.

Now, simply multiply the given values:

Impulse = 1300 N × 5.60×10^(-3) s

Impulse ≈ 7.28 Ns

So, the magnitude of the impulse delivered to the soccer ball is approximately 7.28 Ns.

To know more about impulse visit:

https://brainly.com/question/21325350

#SPJ11

The magnitude of the object's momentum is approximately 5.47 × 10^7 kg ∙ m/s.

The formula for momentum is p = mv, where p is momentum, m is mass, and v is velocity. In this case, the object's mass is 0.456 kg and its velocity is 1.20 × 10^8 m/s.

To calculate the magnitude of its momentum, we simply plug in these values into the formula:

p = (0.456 kg) × (1.20 × 10^8 m/s)

p = 5.47 × 10^7 kg∙m/s

Therefore, the correct answer is 5.47 × 10^7 kg∙m/s.
To calculate the magnitude of an object's momentum, we will use the relativistic momentum formula, since the object is moving at a significant fraction of the speed of light (c).

Relativistic momentum (p) is given by the formula:

p = (m * v) / sqrt(1 - (v²/c²))

where m is the rest mass (0.456 kg), v is the velocity (1.20 × 10^8 m/s), and c is the speed of light (3.00 × 10^8 m/s).

Let's plug in the values:

p = (0.456 * 1.20 × 10^8) / sqrt(1 - (1.20 × 10^8)² / (3.00 × 10^8)²)
p ≈ 5.47 × 10^7 kg ∙ m/s

Learn more about momentum here :-

https://brainly.com/question/30677308

#SPJ11

So, the magnetic field inside the solenoid is 2.18 millitesla.

An air-core solenoid is a coil of wire that has no iron core. In this case, the solenoid has 765 turns, a length of 0.19 meters, and a cross-sectional area of 0.074 square meters. The current flowing through the solenoid is 0.172 amps.
The magnetic field inside a solenoid is proportional to the current and the number of turns per unit length, which is referred to as the solenoid's "turns density." The formula for the magnetic field inside a solenoid is B = μ₀nI, where B is the magnetic field, μ₀ is the permeability of free space (a constant), n is the turns density, and I is the current.
In this case, we can calculate the turns density by dividing the total number of turns by the length of the solenoid: n = 765/0.19 = 4026 turns/meter. Using this value, and plugging in the other values into the formula, we can calculate the magnetic field inside the solenoid: B = μ₀nI = 4π x 10^-7 x 4026 x 0.172 = 2.18 x 10^-3 tesla.

To know more about current visit:

https://brainly.com/question/2264542

#SPJ11

The answer to the question is that the material of the cube is lead (option c).


When an object is placed on a scale, the scale measures the force that the object exerts on it, which is equal to the weight of the object. In this case, the scale reads 570 N, which means that the weight of the cube is 570 N.

To determine the material of the cube, we need to use its volume and weight. We can do this by calculating its density, which is the mass of the cube per unit volume.

Density = Mass / Volume

Rearranging the formula:

Mass = Density x Volume

We can now calculate the mass of the cube using the densities of the given materials and its volume of 3.0 ×10-3 m3 (3.0 L):

a) Copper: Mass = 8.9 × 103 kg/m3 x 3.0 ×10-3 m3 = 26.7 kg

b) Aluminum: Mass = 2.7 × 103 kg/m3 x 3.0 ×10-3 m3 = 8.1 kg

c) Lead: Mass = 11 × 103 kg/m3 x 3.0 ×10-3 m3 = 33 kg

d) Gold: Mass = 19 × 103 kg/m3 x 3.0 ×10-3 m3 = 57 kg

We can see that the mass of the cube is closest to the mass of lead, which has a density of 11 × 103 kg/m3. Therefore, the material of the cube is lead (option c).

To learn more about weight visit:

brainly.com/question/17278425

#SPJ11

The magnetic field 1 cm from the wire carrying a 1 A current is 2 x 10^-5 T.

To answer the question, we can use the formula for the magnetic field produced by a current-carrying wire, which is given by:
B = μ0I/2πr
where B is the magnetic field, I is the current, r is the distance from the wire, and μ0 is the permeability of free space (a constant equal to 4π x 10^-7 T·m/A).
In this case, we are given that the magnetic field 10 cm from the wire carrying a 1 A current is 2 μT. Therefore, we can plug in the values and solve for r:
2 μT = (4π x 10^-7 T·m/A) x 1 A / (2π x 0.1 m)
2 μT = 2 x 10^-6 T
Now we can use the same formula to find the magnetic field 1 cm from the wire:
B = μ0I/2πr = (4π x 10^-7 T·m/A) x 1 A / (2π x 0.01 m)
B = 2 x 10^-5 T
Therefore, the magnetic field 1 cm from the wire carrying a 1 A current is 2 x 10^-5 T, expressed in units of tesla (T).

To know more about Magnetic Field visit:
https://brainly.com/question/14848188
#SPJ11

The separation between adjacent lines on the grating is 615 nm. where d is the separation between adjacent lines on the grating, θ is the angle between the incident light and the diffracted light, m is the order of the diffraction maximum, and λ is the wavelength of the incident light.

In this case, we know that the 2nd order maximum forms an angle of 53.8° relative to the incident light. Therefore, we can write:
d(sin θ) = mλ
d(sin 53.8°) = 2λ
We need to solve for d, so we can rearrange the equation to get:
d = 2λ / sin 53.8°

However, we don't have the value of λ, so we need to use another piece of information. We know that the light has passed through a grating, so we can assume that the incident light consists of a narrow range of wavelengths. Let's say that the incident light has a wavelength of 500 nm (which is in the visible range).
Now we can substitute this value of λ into the equation:
d = 2(500 nm) / sin 53.8°
d = 615 nm

To know more about incident light visit:-

https://brainly.com/question/29804046

#SPJ11

Her angular velocity after pulling her arms in is 15.625 rad/s.

To solve this problem, we need to use the conservation of angular momentum. The initial angular momentum (L_initial) is the product of the initial rotational inertia (I_initial) and the initial angular velocity (ω_initial). The final angular momentum (L_final) is the product of the final rotational inertia (I_final) and the final angular velocity (ω_final). The conservation of angular momentum states that L_initial = L_final.

Given:
I_initial = 2.50 kgm^2
ω_initial = 10.0 rad/s
I_final = 1.60 kgm^2

First, calculate the initial angular momentum:
L_initial = I_initial × ω_initial = 2.50 kgm^2 × 10.0 rad/s = 25.0 kgm^2/s

Since L_initial = L_final:
L_final = 25.0 kgm^2/s

Now, find the final angular velocity (ω_final):
ω_final = L_final / I_final = 25.0 kgm^2/s / 1.60 kgm^2 = 15.625 rad/s

Learn more about angular velocity here:-

https://brainly.com/question/30237820

#SPJ11

The instantaneous acceleration of the object at time t = 2.00 s is -10.0 m/s^2.

To determine the instantaneous acceleration at time t = 2.00 s, we need to take the derivative of the velocity function with respect to time.

v(t) = -3.0 m/s - (2.0 m/s2) t - (1.0 m/s3) t^2

Taking the derivative:

a(t) = -2.0 m/s^2 - 2.0 m/s^3 t

Substituting t = 2.00 s:

a(2.00) = -2.0 m/s^2 - 2.0 m/s^3 (2.00) = -10.0 m/s^2

Therefore, the instantaneous acceleration at time t = 2.00 s is -10.0 m/s^2. This means that at that specific moment in time, the object is accelerating at a rate of 10.0 meters per second squared in the negative direction.

In summary, to find the instantaneous acceleration at a specific time, we take the derivative of the velocity function with respect to time and substitute the given time into the resulting equation. The resulting value represents the rate of change of velocity at that specific moment in time.

For more such questions on instantaneous acceleration, click on:

https://brainly.com/question/10771099

#SPJ11

To determine the instantaneous acceleration at time t = 2.00 s, we need to find the derivative of the velocity function with respect to time. The velocity function is given by v(t) = -3.0 m/s - (2.0 m/[tex]s^{2}[/tex]) t (1.0 m/[tex]s^{3}[/tex]) [tex]t_{2}[/tex].

Taking the derivative of v(t) with respect to t, we get: a(t) = d/dt v(t) = -2.0 m/[tex]s^{2}[/tex] - 3.0 m/[tex]s^{3}[/tex] t. Substituting t = 2.00 s into the acceleration function, we get: a(2.00) = -2.0 m/[tex]s^{2}[/tex] - 3.0 m/[tex]s^{3}[/tex] (2.00), a(2.00) = -2.0 m/[tex]s^{2}[/tex] - 12.0 m/[tex]s^{2}[/tex], a(2.00) = -14.0 m/[tex]s^{2}[/tex]. Therefore, the instantaneous acceleration of the object at time t = 2.00 s is -14.0 m/[tex]s^{2}[/tex].

Learn more about velocity here :

https://brainly.com/question/17127206

#SPJ11

The true total mass of a galaxy cluster is much greater than the mass measured by adding up all the stars in all the galaxies of the cluster.


This is because the majority of the mass in a galaxy cluster is actually in the form of dark matter, which cannot be detected through traditional methods like observing stars. Dark matter is a mysterious substance that interacts only through gravity and is thought to make up about 85% of the matter in the universe.

Therefore, the true total mass of a galaxy cluster is much higher than what is visible through telescopes. Scientists use a variety of methods, such as gravitational lensing and the motions of the galaxies within the cluster, to estimate the amount of dark matter present and thus determine the true mass of the cluster. Understanding the distribution and amount of dark matter in galaxy clusters is an important part of studying the large-scale structure of the universe.

Learn more about gravitational lensing here:

https://brainly.com/question/15712167

#SPJ11