a solution containing 70 ml is 12% acid. How many ml of a solution containing 50% acid must be added for the solution to become 25% acid

Paper chromatography is a technique used to separate a mixture into its component molecules. In this process, molecules migrate and move up the paper at different rates due to the differences in solubility, which results in varying levels of absorption onto the paper. By analyzing the position of each molecule on the paper, scientists can identify and separate the individual components of the mixture.

Paper chromatography is a highly effective technique used in scientific research to separate a mixture of different molecules into their individual components. This method relies on the fact that different molecules have varying degrees of solubility in a given solvent.

When a mixture is placed on a strip of paper and then dipped into a solvent, the solvent is drawn up the paper via capillary action. As the solvent moves up the paper, the different components of the mixture begin to separate out based on their unique solubility properties. Some components may be highly soluble and will be carried up the paper quickly, while others may be less soluble and will move more slowly.

This difference in solubility is what allows for the separation of the mixture into its individual components. Once the solvent has traveled a certain distance up the paper, the different components can be identified by their unique positions on the paper strip. Overall, paper chromatography is a powerful tool for separating and identifying different molecules based on their different solubility properties.

Learn more about :

capillary action : brainly.com/question/12775150

#SPJ11

The ground state electron configuration of Br is E. [Ar]4s24d104p6. The  Br has 35 electrons, and the electron configuration is determined by filling up the orbitals in order of increasing energy. The first 18 electrons fill up the first three energy levels, which are represented by the noble gas configuration of Argon ([Ar]).

The remaining 17 electrons fill up the 4th and 5th energy levels, with the 4s and 4p orbitals filling up before the 5s and 5p orbitals. Therefore, the correct configuration is [Ar]4s24d104p6.
To determine the ground state electron configuration for Br, we can follow the periodic table order. Bromine has an atomic number of 35, which means it has 35 electrons. Starting from hydrogen, we fill the orbitals in the order: 1s, 2s, 2p, 3s, 3p, 4s, 3d, 4p.

learn more about electron configuration

https://brainly.com/question/26084288

#SPJ11

The pH at the equivalence point is 7.00, before the equivalence point is 0.74 (basic), and after the equivalence point is 0.74 (acidic).

In this titration, we have a strong base (KOH) reacting with a strong acid (HI). At the equivalence point, all the KOH will have reacted with HI to form KI and H₂O. We can use the stoichiometry of this reaction to calculate the number of moles of HI needed to reach the equivalence point.

First, we need to determine the volume of HI needed to reach the equivalence point. Since we have 35.0 mL of 0.180 M KOH, we can use the equation M1V1 = M2V2 to find the number of moles of KOH present:

0.180 M x 0.0350 L = 0.00630 mol KOH

Since the reaction between KOH and HI is 1:1, we need 0.00630 moles of HI to reach the equivalence point. Using the same equation, we can find the volume of HI needed:

0.180 M x V(HI) = 0.00630 mol HI
V(HI) = 0.0350 L

At the equivalence point, the solution will contain only KI and water. The pH of this solution will be neutral, or 7.00.

Before the equivalence point, the KOH is in excess and the solution is basic. We can use the equation for the reaction of KOH and water to calculate the concentration of hydroxide ions:

KOH(aq) + H₂O(l) → K⁺(aq) + OH⁻(aq)

The initial concentration of KOH is 0.180 M, so the concentration of OH⁻ will also be 0.180 M. Using the equation for the ion product constant of water, we can calculate the pH:

pH = -log[OH⁻] = -log(0.180) = 0.74

After the equivalence point, the HI is in excess and the solution is acidic. We can use the equation for the reaction of HI and water to calculate the concentration of hydronium ions:

HI(aq) + H₂O(l) → H₃O⁺(aq) + I⁻(aq)

The initial concentration of HI is 0.180 M, so the concentration of H₃O⁺ will also be 0.180 M. Using the equation for pH, we can calculate the pH:

pH = -log[H₃O⁺] = -log(0.180) = 0.74

Therefore, the pH at the equivalence point is 7.00, before the equivalence point is 0.74 (basic), and after the equivalence point is 0.74 (acidic).

To know more about pH, refer to the link below:

https://brainly.com/question/31132561#

#SPJ11

The molarity of urea in the given aqueous solution is 5.31 M.

First, we need to determine the mass of urea present in 100 g of the solution:

Mass of urea in 100 g of solution = 31 g

Next, we can use the density of the solution to determine the volume of 100 g of the solution:

Volume of 100 g of solution = 100 g / 1.038 g/mL = 96.3 mL

We can then convert the mass of urea to moles of urea using its molar mass:

Molar mass of urea = 60.06 g/mol

Moles of urea = 31 g / 60.06 g/mol = 0.516 mol

Finally, we can calculate the molarity of the urea solution:

Molarity of urea = moles of urea / volume of solution in liters

= 0.516 mol / 0.0963 L

= 5.31 M (to 2 decimal places)

To know more about molarity, refer here:

https://brainly.com/question/27006255#

#SPJ11

Based on the information provided, we can conclude that the Cr2O72- ion has a visible absorption spectrum with a peak around 500 nm.

This means that when light with a wavelength close to 500 nm passes through a solution containing the Cr2O72- ion, the ion will absorb some of the light, resulting in a decrease in the intensity of the light passing through the solution at that wavelength.

This property can be used to identify the presence of the Cr2O72- ion in a solution and to determine its concentration using spectrophotometry.

To know more about Cr2O72 click on below link :

https://brainly.com/question/4268680#

#SPJ11

Answer:

The absorption of light by the Cr2O72- ion at a wavelength of 500 nm indicates that the ion has a visible absorption spectrum.

Explanation:

The absorption spectrum of a molecule or ion can provide information about its electronic structure and chemical properties, which can be useful in many areas of chemistry and physics.

This absorption corresponds to a transition between energy levels in the ion, which may involve the promotion of an electron to a higher energy level..

In addition, the absorption of light by the Cr2O72- ion at this wavelength may be used in analytical techniques such as spectrophotometry to quantitatively determine the concentration of the ion in a sample.

To know more on  absorption spectrum  ,

https://brainly.com/question/14282264#

#spj11

We need 9.05 mL of the 0.348 M hydroiodic acid solution to neutralize 13.2 mL of the 0.119 M barium hydroxide solution.

To solve this problem, we will use the balanced chemical equation for the reaction between hydroiodic acid (HI) and barium hydroxide (Ba(OH)2):
2HI + Ba(OH)2 → BaI2 + 2H2O
We can see from this equation that two moles of hydroiodic acid are required to neutralize one mole of barium hydroxide. Therefore, we need to calculate the number of moles of barium hydroxide present in the 13.2 mL of 0.119 M solution:
moles of Ba(OH)2 = volume (in L) x concentration (in mol/L)
moles of Ba(OH)2 = 13.2 mL x (1 L/1000 mL) x 0.119 mol/L
moles of Ba(OH)2 = 0.00157 mol
Since two moles of hydroiodic acid are required to neutralize one mole of barium hydroxide, we need twice as many moles of hydroiodic acid as moles of barium hydroxide:
moles of HI = 2 x moles of Ba(OH)2
moles of HI = 2 x 0.00157 mol
moles of HI = 0.00314 mol
Finally, we can use the concentration of the hydroiodic acid solution to calculate the volume required:
moles of HI = volume (in L) x concentration (in mol/L)
volume (in L) = moles of HI / concentration (in mol/L)
volume (in L) = 0.00314 mol / 0.348 mol/L
volume (in L) = 0.00905 L
For  more such questions on hydroiodic acid

https://brainly.com/question/29593791

#SPJ11

The Ka of the weak acid is 4.32 x 10^(-6).

pH = -log[H+]

pH = 1.80

[H+] = [tex]10^(-pH)[/tex]

[H+] = [tex]10^(-1.80)[/tex]

[H+] = 1.58 x [tex]10^(-2)[/tex] M

Next, we can use the equilibrium expression for the ionization of the weak acid to calculate the Ka:

Ka = [H+][A-]/[HA]

where [HA] is the initial concentration of the weak acid and [A-] is the concentration of its conjugate base.

Ka = [H+]²/[HA]0

Plugging in the values we have:

Ka = (1.58 x [tex]10^(-2)[/tex])² / 0.073

Ka = 4.32 x [tex]10^(-6)[/tex]

weak acid is an acid that only partially dissociates or ionizes in water, meaning that only a small fraction of its molecules donate hydrogen ions (H+) to the water. This results in a lower concentration of hydrogen ions in the solution compared to a strong acid.

The degree of ionization or dissociation of a weak acid depends on its dissociation constant (Ka), which is a measure of its tendency to dissociate in water. The lower the Ka value, the weaker the acid. Examples of weak acids include acetic acid (found in vinegar), formic acid, and carbonic acid.

To learn more about Weak acid visit here:

brainly.com/question/22104949

#SPJ4

The molar mass of the unknown diatomic gas is 56 g/mol.



1. Calculate the total moles of gas in the mixture:

We can use the ideal gas law to calculate the total number of moles of gas in the mixture:

PV = nRT

At STP, P = 1 atm and T = 273 K, so:

V = nRT/P = (6.4 g Ar + 6.4 g Ne + 6.4 g unknown gas) x (1 mol/22.4 L) x (0.0821 L atm/mol K) x 273 K / 1 atm = 0.901 mol

2. Calculate the moles of the unknown diatomic gas:

Since each of the three gases in the mixture has the same mass, we know that each gas contributes an equal number of moles to the total. Therefore:

n_unknown gas = (0.901 mol total gas) / 3 = 0.300 mol

3. Use the molar mass formula to find the molar mass of the unknown diatomic gas:

Molar mass = mass / moles

The mass of the unknown gas is 6.4 g, and we just found that it has 0.300 moles. Therefore:

Molar mass = 6.4 g / 0.300 mol = 21.33 g/mol

However, this is only the molar mass of one atom of the unknown gas, and we know that it is a diatomic gas (meaning that each molecule has two atoms). So we need to double this value to get the molar mass of the whole molecule:

Molar mass (diatomic gas) = 2 x 21.33 g/mol = 42.66 g/mol

Finally, we round to the nearest whole number to get the answer:

Molar mass (unknown diatomic gas) = 56 g/mol.

learn more about molar mass

https://brainly.com/question/837939

#SPJ11

Masses (expressed in x10-28 grams) of the subatomic particles are.

proton: 1.007

neutron:1.008

Electron: 0.000055

Subatomic particles are particles that  make up atoms which are protons, neutrons and electrons.

subatomic particles can however exist on their own outside atoms or molecules. Subatomic particles are not part of atoms like neutrinos which has electrically charged neutral charge with smaller mass.

Masses (expressed in x10-28 grams) of the subatomic particles are.

proton: 1.007

neutron:1.008

Electron: 0.000055

Learn more about subatomic molecules below.

https://brainly.com/question/16847839

#SPJ1

Answer:

Fluoride is abundant in foods, beverages, dental products and much more negating the need for water fluoridation

Explanation: Absent from labels, fluoride is in virtually all foods and beverages, including, soda, baby foods and all infant formulas, It’s high in tea (up to 6 mg/L) and ocean fish. Grape products (raisins, juice, wine, jellies, jams) because of fluoride-containing pesticide residues.

It’s even in chocolate and french fries.

Fluoride ingested daily from toothpaste ranges from 1/4 to 1/3 milligram (National Institutes of Health) “Gels used by dentists are typically applied one to four times a year and can lead to ingestions of 1.3 to 31.2 mg fluoride each time.”

Fluoride is in 20% of medicines, food packaging and inhaled from air pollution and probably ocean mist (oceans have about 1.4 ppm Fluoride) and cold mist humidifiers using fluoridated water

How much is too much?

According to the National Academy of Sciences, “without causing unwanted side effects including moderate dental fluorosis,” (yellow splotched teeth), the adequate daily intake of fluoride, from all sources, should not exceed: (But does)

-- 0.01 mg/day for 0 – 6-month-olds (which is in every infant formula – concentrated or not)

-- 0.5 mg/day for 7 through 12 months

-- 0.7 mg/day for 1 – 3-year-olds

-- 1.1 mg/day for 4 – 8 year olds

In areas where fluoridation of the water supply is not feasible, the fluoride content can be supplied by other sources such as fluoride supplements, fluoride toothpaste, or fluoride treatments at the dentist. It is important to maintain adequate levels of fluoride intake as it is a crucial mineral for oral health and can help prevent tooth decay.

Fluoride content in foods is indeed limited, and in areas where fluoridation of the water supply is not feasible, this mineral can be supplied by alternative sources such as fluoride supplements, toothpaste with fluoride, and mouth rinses containing fluoride.

It's important to consult with a dentist or healthcare professional before starting any fluoride supplementation to ensure the appropriate dosage and avoid potential risks associated with excessive fluoride intake.

Learn more about fluoridation here: brainly.com/question/11337339

#SPJ11

The correct mathematical relationship to use to calculate the pH of a 0.10M aqueous HBr solution is: b) pH = -log(1.0*10^-1).

The pH of a solution is determined by the concentration of hydrogen ions (H+) present in the solution. HBr is a strong acid that dissociates completely in water, yielding H+ ions and Br- ions. Therefore, the concentration of H+ ions in a 0.10M aqueous HBr solution is also 0.10M.

The pH of a solution can be calculated using the formula pH = -log[H+]. Substituting [H+] = 0.10M, we get pH = -log(0.10) = -(-1) = 1. Therefore, the correct mathematical relationship to use to calculate the pH of a 0.10M aqueous HBr solution is option b) pH = -log(1.0*10-1).

The pH of a solution can be calculated using the formula pH = -log([H+]), where [H+] represents the concentration of hydrogen ions in the solution. In this case, HBr dissociates completely in water, so the concentration of hydrogen ions is equal to the concentration of HBr, which is 0.10M. Therefore, the formula becomes pH = -log(1.0*10^-1) for this specific problem.

Learn more about concentration of hydrogen ions: https://brainly.com/question/17571892

#SPJ11

[tex]CH_3OC_6H_4CH_2Br[/tex], which has an electron-donating substituent, would be more reactive than benzyl bromide, while [tex]O_2NC_6H_4CH_2Br[/tex], which has an electron-withdrawing substituent, would be less reactive.

The stepwise mechanism for the reaction of benzyl bromide ([tex]C_6H_5CH_2Br[/tex]) with [tex]CH_3OH[/tex] to afford benzyl methyl ether ([tex]C_6H_5CH_2OCH_3[/tex]) involves the following steps:
1. Formation of carbocation: The alkyl halide, benzyl bromide, undergoes heterolytic cleavage of the C-Br bond to form a carbocation intermediate ([tex]C_6H_5CH_2^+[/tex]).
2. Nucleophilic attack: The nucleophile, [tex]CH_3OH[/tex], attacks the carbocation intermediate to form the desired product, benzyl methyl ether, and HBr.
The reaction occurs rapidly because benzyl bromide is a 1st-degree alkyl halide, which means that the carbocation intermediate is relatively stable due to the presence of the aryl group. This stability allows for the formation of the carbocation intermediate even under conditions that favor an SN1 mechanism. Additionally, [tex]CH_3OH[/tex] is a weak nucleophile, which means that it is not hindered by steric effects and can easily attack the carbocation intermediate.

To learn more about nucleophile click here https://brainly.com/question/30713995

#SPJ11

The volume percentage of butanol in the given solution is 37%.

Butanolis a four-carbon alcohol with the formula C4H9OH that may be found in five isomeric configurations (four structural isomers), ranging from straight-chain primary alcohol to branched-chain tertiary alcohol.

The volume percentage of butanol in the given solution can be calculated using the formula:

Volume Percentage = (Volume of Butanol ÷ Total Volume of Solution) × 100

Substituting the given values in the formula, we get:

Volume Percentage = (37 L ÷ 100 L) × 100

Volume Percentage = 37%

Therefore, the volume percentage of butanol in the given solution is 37%.

To know more about butanol visit:

https://brainly.com/question/1358729

#SPJ11

Fick's rate equation is used to describe the diffusion of one component through a binary mixture of components. The equation is given by: J = -D * ∇C

To prove the given expressions, we need to start with the Fick's rate equation for each component: For component a:
Ja = -Da * ∇Ca, For component b: Jb = -Db * ∇Cb. where Da and Db are the diffusion coefficients of components a and b, respectively, and ∇Ca and ∇Cb are the gradients of their concentrations. Now, we can use the mole fraction (X) of each component to relate their concentrations: Ca = Xa * C, Cb = Xb * C, where C is the total concentration of the mixture.

Substituting these expressions in the Fick's rate equations for components a and b, we get: Ja = -Da * Xa * ∇C, Jb = -Db * Xb * ∇C. Now, we can use the definition of the flux ratio (nanb) and the concentration ratio (nabr) to relate the fluxes of components a and b: nanb = Ja / Jb = (Da * Xa) / (Db * Xb), nabr = Ca / Cb = (Xa * C) / (Xb * C) = Xa / Xb. Therefore, a. nanbcv = nanb * nabr = (Da * Xa * Xa) / (Db * Xb * Xb), b. nanbrv = nanb / nanbcv = (Db * Xb * Xb) / (Da * Xa * Xa), c. jajb0 = Ja / Jb0 = -Da * Xa * ∇Cb0 / (Db * Xb * ∇Ca0), where Jb0 and ∇Ca0 are the flux and gradient of component b and a, respectively, at the interface between the mixture and the surrounding medium (e.g., a membrane).

Learn more about mixture here :

https://brainly.com/question/24898889

#SPJ11

The correct answer is: a) Carbon dioxide from amongst the reagents which are treated with phenylmagnesium bromide followed by acid. It gives benzoic acid.

When phenylmagnesium bromide (a Grignard reagent) is treated with carbon dioxide followed by an acid workup, benzoic acid is formed. Here's the step-by-step explanation:

1. Phenylmagnesium bromide reacts with carbon dioxide to form a magnesium salt of benzoic acid.
2. After completing the reaction, an acid workup (usually aqueous acidic solution) is added.
3. The magnesium salt is protonated by the acid, leading to the formation of benzoic acid.

Benzoic acid is a colorless crystalline solid and a common organic acid. Its chemical formula is C7H6O2, and it is also known as carboxybenzene or phenylformic acid. It is a weak acid that is often used as a food preservative, as it inhibits the growth of bacteria and fungi.

Benzoic acid can be found naturally in many fruits and berries, including cranberries, plums, and apples.

Learn more about benzoic acid here:

https://brainly.com/question/24052816

#SPJ11

In the proton-proton chain, the net reaction is that four hydrogen nuclei are converted to one helium nucleus and two positrons are released.

During the proton-proton chain, four hydrogen nuclei fuse to form one helium nucleus.  The neutrinos are neutral, low-mass particles that are released during the fusion process. In this process, four hydrogen nuclei (protons) undergo a series of reactions, ultimately forming one helium nucleus (two protons and two neutrons) and releasing two positrons, along with other particles and energy in the form of photons.

The proton-proton chain plays a crucial role in the energy production of stars, and its net reaction involves the conversion of four hydrogen nuclei into one helium nucleus, with the release of two positrons.

To know more about fusion process, click here

https://brainly.com/question/18542734

#SPJ11

To make a 0.121 M hydroiodic acid solution from a stock solution of 6.00 M hydroiodic acid, you need to dilute the stock solution with water.

The formula for dilution is C1V1 = C2V2,

where C1 is the initial concentration,

V1 is the initial volume,

C2 is the final concentration, and

V2 is the final volume.

In this case, C1 = 6.00 M, C2 = 0.121 M, and V2 = 175 mL. Solving for V1, we get V1 = (C2V2)/C1 = (0.121 M x 175 mL)/6.00 M = 3.54 mL.

Therefore, you need to add 3.54 mL of the concentrated acid to 171.46 mL of water to obtain a total volume of 175 mL of the dilute solution. It is important to add the acid slowly to the water while stirring to prevent splashing and ensure proper mixing.

To know more about hydroiodic acid visit :

https://brainly.com/question/12849140

#SPJ11

The volume of the diluted solution that contains 10.8 g of NaCl is 0.323 L or 323 ml.

M1V1 = M2V2

8.7 M x 0.125 L = M2 x 3.0 L

M2 = (8.7 M x 0.125 L) / 3.0 L

M2 = 0.3625 M

Now we can use the final concentration and the given mass of NaCl to calculate the volume of the diluted solution:

mass of NaCl = concentration x volume x molar mass

10.8 g = 0.3625 M x volume x 58.44 g/mol

volume = 10.8 g / (0.3625 M x 58.44 g/mol)

volume = 0.323 L or 323 ml

A NaCl solution is a solution of sodium chloride, also known as common table salt, in water. NaCl is an ionic compound consisting of positively charged sodium ions (Na+) and negatively charged chloride ions (Cl-). When NaCl is dissolved in water, the ions separate and become surrounded by water molecules, forming a homogeneous mixture called a solution.

NaCl solutions are commonly used in many scientific and industrial applications, including biology, chemistry, and food preparation. The concentration of a NaCl solution is typically expressed in terms of molarity, which is the number of moles of NaCl dissolved per liter of solution. For example, an 8.7 M NaCl solution contains 8.7 moles of NaCl per liter of solution. The properties and behavior of NaCl solutions depend on their concentration and other factors such as temperature and pressure.

To learn more about NaCl visit here:

brainly.com/question/30155639

#SPJ4

Answer:

If you're asking about what type of change then it would be a Physical change.

A physical change is defined as changes affecting the form of a chemical substance, but not its chemical composition.

To answer your question, we need to consider the energy level diagram of a hydrogen atom. The energy levels are given by the equation E = -13.6/n^2, where n is the principal quantum number.

(a) To emit light with the longest possible wavelength, the hydrogen atom should jump from the third excited state (n=4) to the second excited state (n=3). This transition corresponds to the emission of a photon with the lowest energy and longest wavelength, which corresponds to the red end of the visible spectrum.

(b) To emit light with the shortest possible wavelength, the hydrogen atom should jump from the third excited state (n=4) to the ground state (n=1). This transition corresponds to the emission of a photon with the highest energy and shortest wavelength, which corresponds to the violet end of the visible spectrum.

(c) To absorb light with the longest possible wavelength, the hydrogen atom should jump from the ground state (n=1) to the second excited state (n=3). This transition corresponds to the absorption of a photon with the lowest energy and longest wavelength, which again corresponds to the red end of the visible spectrum.
Learn more about :

principal quantum number : brainly.com/question/30656222

#SPJ11

The amount (in mL) you need to use from the concentrated stock to prepare the diluted solution is 39.47 mL.

Use the following formula:

C₁V₁= C₂V₂

where C₁ is the concentration of the stock solution (1.9 M),

V₁ is the volume of the stock solution needed,

C₂ is the concentration of the diluted solution (0.3 M),

and V₂ is the total volume of the diluted solution (250 mL).

Solving for V₁:

V₁ = (C₂V₂) / C₁

Substitute the known values into the formula:

V₁ = (0.3 M × 250 mL) / 1.9 M

V₁ ≈ 39.47 mL

Approximately 39.47 mL of the 1.9 M stock solution is needed to prepare the 0.3 M diluted solution with a 250 mL total volume.

To learn more about diluted solution visit:

https://brainly.com/question/24881505

#SPJ11

Since the rates of physical and chemical weathering are constants across all environments, time is not a significant influence. Time is essential because it permits additional weathering to take place. False.

The primary determinants of both the rates and kinds of weathering are water and temperature: Chemical processes that lead to weathering require water. Ice wedging cannot occur in the absence of water. The rate of chemical reactions increases with temperature.

The rates of the majority of weathering processes are thought to slow down over time, according to the few prior investigations of rock-weathering rates that provide quantitative evidence of the relationship between chemical weathering and time. A warmer Earth also hastens chemical weathering by increasing rainfall and accelerating chemical reactions.

Learn more about chemical weathering visit: brainly.com/question/29784355

#SPJ4

We need to add 0.05115 moles of sodium hydroxide to 150 mL of the hydrocyanic acid solution to prepare a buffer with a pH of 9.610.

To prepare a buffer with a pH of 9.610, we would need to add sodium hydroxide to the hydrocyanic acid solution to increase the pH. The first step is to calculate the pKa of hydrocyanic acid, which is 9.21.

To prepare a buffer, we need to use the Henderson-Hasselbalch equation:

pH = pKa + log([A-]/[HA])

We want a pH of 9.610, so we can plug in the pKa and solve for the ratio of [A-]/[HA]:

9.610 = 9.21 + log([A-]/[HA])
0.39 = log([A-]/[HA])
Antilog(0.39) = [A-]/[HA]
2.42 = [A-]/[HA]

This means that we need the concentration of the conjugate base (A-) to be 2.42 times greater than the concentration of the acid (HA) in the buffer solution.

We know that we have 150 mL of a 0.341 M hydrocyanic acid solution. To calculate how many moles of sodium hydroxide we need to add, we can use the balanced chemical equation:

HCN + NaOH -> NaCN + H2O

The stoichiometry of this reaction is 1:1, so we need to add the same number of moles of NaOH as we have moles of HCN.

moles of HCN = concentration x volume = 0.341 M x 0.150 L = 0.05115 moles

moles of NaOH = 0.05115 moles

Therefore, we need to add 0.05115 moles of sodium hydroxide to 150 mL of the hydrocyanic acid solution to prepare a buffer with a pH of 9.610.

To know more about sodium hydroxide click here:

https://brainly.com/question/29327783

#SPJ11

The temperature change of the aqueous mixture is 5.0⁰C.

When a solid dissolves in water, the process is usually exothermic, meaning that heat is released to the surroundings.

As a result, the temperature of the aqueous mixture increases. The amount of heat released is proportional to the amount of solid dissolved and the nature of the substance.

The temperature change of the aqueous mixture can be calculated using the following equation:

q = m x c x ΔT

where q is the heat absorbed or released, m is the mass of the aqueous mixture, c is the specific heat capacity of the aqueous mixture, and ΔT is the temperature change.

In this case, we do not have enough information to calculate the heat absorbed or released or the specific heat capacity of the aqueous mixture.

However, we do know that the temperature of the aqueous mixture increased by 5.0⁰C.

to know more about specific heat capacity refer here:

https://brainly.com/question/29766819#

#SPJ11

A change of one unit on the pH scale represents a ten-fold change in the concentration of H+ ions in an aqueous solution.

Specifically, a decrease of one unit on the pH scale corresponds to a ten-fold increase in the concentration of H+ ions, and vice versa. For example, if the pH of a solution decreases from 6 to 5, the concentration of H+ ions in the solution increases by a factor of 10. If the pH of a solution increases from 3 to 4, the concentration of H+ ions in the solution decreases by a factor of 10.

The pH scale is a logarithmic scale that measures the acidity or basicity of a solution based on its concentration of H+ ions. A solution with a pH of 7 is considered neutral, while a pH less than 7 indicates acidity and a pH greater than 7 indicates basicity.

Learn more about acidity here:

https://brainly.com/question/11543614

#SPJ11

In the titration of 2.00 mL of vinegar, it takes 15.32 mL of 0.100M NaOH (aq) to neutralize acetic acid in vinegar. The number of moles of NaOH (aq) is:
The number of moles of NaOH (aq) is 0.001532 moles.

To calculate the number of moles of NaOH (aq), we can use the formula:
moles = volume (L) × concentration (M)
First, convert the volume of NaOH from mL to L:
15.32 mL * (1 L / 1000 mL) = 0.01532 L
Next, multiply the volume by the concentration:
0.01532 L × 0.100 M = 0.001532 moles

Summary: In the titration of 2.00 mL of vinegar, 0.001532 moles of 0.100M NaOH (aq) were used to neutralize the acetic acid in the vinegar.

Learn more about moles click here:

https://brainly.com/question/29367909

#SPJ11

The entropy change is zero.This means that there is no net change in the entropy of the system during the Carnot cycle.

To calculate the entropy change for the Carnot cycle, we need to use the formula:

ΔS = Q_hot/T_hot - Q_cold/T_cold

where ΔS is the entropy change, Q_hot is the heat absorbed from the hot reservoir, T_hot is the temperature of the hot reservoir, Q_cold is the heat released to the cold reservoir, and T_cold is the temperature of the cold reservoir.

Since the Carnot cycle is reversible, we can assume that the heat transfer occurs at a constant temperature, so Q_hot/T_hot = Q_cold/T_cold. Therefore, the entropy change is zero:

ΔS = Q_hot/T_hot - Q_cold/T_cold = 0

Learn more about Carnot cycle here:

https://brainly.com/question/31645644

#SPJ11

To calculate the percentage of silicic acid that would dissociate in a liter solution with a pH of 8.2, we need to use the dissociation constant (Ka) of the acid.

The Ka for silicic acid is approximately 2.4 x 10^-10. Using this value and the initial concentration of 0.002 moles, we can calculate the concentration of H+ ions and the concentration of silicate ions that would result from dissociation.

Using the pH of 8.2, we can calculate the concentration of H+ ions to be 6.31 x 10^-9 M. This value, when substituted into the Ka equation, gives us the concentration of silicate ions at equilibrium. The calculation shows that only a very small fraction of the silicic acid will dissociate, with approximately 0.00195 moles remaining in its undissociated form. This means that only 0.25% of the silicic acid would dissociate. Therefore, the majority of the silicic acid will remain in its molecular form in the solution.

To learn more about dissociation constant visit;

https://brainly.com/question/31755138

#SPJ11

The amount of copper plated can be calculated using Faraday's law:

moles of Cu = (current x time)/(F x n)

where F is Faraday's constant (96,485 C/mol e-) and n is the number of electrons transferred in the reaction (2 for Cu2+ to Cu).

First, we need to convert the time to seconds:

25 minutes = 25 x 60 seconds = 1500 seconds

Then we can plug in the values:

moles of Cu = (3.2 A x 1500 s)/(96,485 C/mol e- x 2)

moles of Cu = 0.0524 mol

Finally, we can use the molar mass of copper to calculate the mass:

mass of Cu = moles of Cu x molar mass of Cu

mass of Cu = 0.0524 mol x 63.55 g/mol

mass of Cu = 3.33 g

Therefore, 3.33 grams of copper can be plated from the given solution.

TO KNOW MORE ABOUT amount of copper CLICK THIS LINK -

brainly.com/question/29145260

#SPJ11

If the pressure of gas A is 2.4 atm and the pressure of gas B is 1.7 atm, then the pressure of gas C is 4.4 atm.

To find the pressure of gas C, we can use the formula for the total pressure of a gas mixture:

Total pressure = Pressure of gas A + Pressure of gas B + Pressure of gas C

Substituting the given values:

8.5 atm = 2.4 atm + 1.7 atm + Pressure of gas C

Simplifying:

8.5 atm - 2.4 atm - 1.7 atm = Pressure of gas C

The pressure of gas C = 4.4 atm

Therefore, the pressure of gas C in the mixture is 4.4 atm.

Learn more about pressure of gases on: https://brainly.com/question/28012687

#SPJ11