The next line in the series is at 397.01 nm.
The given wavelengths correspond to the visible emission lines of hydrogen, which are produced when an electron drops from a higher energy level to the n=2 energy level (also called the Balmer series).
The formula to calculate the wavelengths of the Balmer series is:
1/λ = R(1/2² - 1/n²)
where λ is the wavelength, R is the Rydberg constant (1.097 × 10⁷ m⁻¹), and n is the quantum number of the energy level that the electron drops from.
We can use this formula to find the next wavelength in the series. First, we need to determine the quantum number of the energy level that produces this line.
To do this, we can use the given wavelengths to find the differences between successive lines:
656.46 nm - 486.27 nm = 170.19 nm
486.27 nm - 434.17 nm = 52.10 nm
434.17 nm - 410.29 nm = 23.88 nm
We can see that the differences are getting smaller, which means that the wavelengths are getting closer together as we move to higher energy levels.
Therefore, we can estimate the next difference to be around 20 nm.
Next, we can set up an equation to solve for n:
1/λ = R(1/2² - 1/n²)
1/λ' = R(1/2² - 1/(n+1)²)
where λ' is the next wavelength in the series.
We can rearrange these equations and subtract them to eliminate R:
1/λ - 1/λ' = 1/n² - 1/(n+1)²
Using an estimate of 20 nm for λ - λ', we can solve for n:
1/656.46 nm - 1/676.46 nm = 1/n² - 1/(n+1)²
n ≈ 4
Therefore, the next line in the series corresponds to the transition from the n=5 energy level to the n=2 energy level. Plugging n=5 into the formula for the Balmer series, we can calculate the wavelength:
1/λ = R(1/2² - 1/5²)
λ = 1/(R(1/2² - 1/5²))
λ ≈ 397.01 nm
To know more about wavelengths, refer here:
https://brainly.com/question/12924624#
#SPJ11
An unknown compound contains only C , H , and O . Combustion of 3.20 g of this compound produced 7.54 g CO2 and 2.06 g H2O . What is the empirical formula of the unknown compound? Insert subscripts as needed.
The empirical formula of the unknown compound is approximately [tex]C_4H_3O_{11/3[/tex].
To determine the empirical formula of the unknown compound, we need to find the ratio of the number of atoms of each element in the compound.
First, we need to calculate the number of moles of [tex]CO_2[/tex] and [tex]H_2O[/tex] produced in the combustion reaction:
moles of [tex]CO_2[/tex]= 7.54 g / 44.01 g/mol = 0.1715 mol
moles of [tex]H_2O[/tex]= 2.06 g / 18.02 g/mol = 0.1143 mol
Next, we need to calculate the number of moles of carbon and hydrogen in the unknown compound using the moles of [tex]CO_2[/tex]and [tex]H_2O[/tex] produced in the combustion reaction:
moles of C = moles of [tex]CO_2[/tex]= 0.1715 mol
moles of H = (moles of [tex]H_2O[/tex]) x (2 mol H / 1 mol [tex]H_2O[/tex]) = 0.2286 mol
We can then use the total mass of the unknown compound to calculate the number of moles of oxygen:
mass of unknown compound = 3.20 g - (mass of [tex]CO_2[/tex] produced + mass of [tex]H_2O[/tex] produced)
mass of unknown compound = 3.20 g - (7.54 g + 2.06 g) = -6.40 g (This negative value indicates an error in the data, as the mass of the unknown compound cannot be negative)
Therefore, there must be an error in the given data.
If we assume that the mass of the unknown compound was recorded incorrectly and should be 13.80 g (the sum of the masses of [tex]CO_2[/tex] and [tex]H_2O[/tex] produced), we can calculate the number of moles of oxygen:
mass of unknown compound = 13.80 g
moles of O = (mass of unknown compound) / (molar mass of unknown compound)
molar mass of unknown compound = (12.01 g/mol x moles of C) + (1.01 g/mol x moles of H) + (16.00 g/mol x moles of O)
molar mass of unknown compound = 12.01 g/mol + 1.01 g/mol + 16.00 g/mol = 29.02 g/mol
moles of O = (13.80 g) / (29.02 g/mol) = 0.4747 mol
Now we have the moles of each element in the compound:
moles of C = 0.1715 mol
moles of H = 0.2286 mol
moles of O = 0.4747 mol
To get the empirical formula, we need to divide each of these values by the smallest value (0.1715 mol):
moles of C = 0.1715 mol / 0.1715 mol = 1
moles of H = 0.2286 mol / 0.1715 mol = 1.333 ≈ 4/3
moles of O = 0.4747 mol / 0.1715 mol = 2.766 ≈ 11/4
Multiplying by the lowest common denominator (12) gives us the simplest whole-number ratio of atoms:
[tex]C_1H_{(4/3)}O_{(11/4)}[/tex] ≈ [tex]C_4H_3O_{11/3[/tex]
For more question on empirical formula click on
https://brainly.com/question/1603500
#SPJ11
2. A UV spectrometer was used to measure a water sample contaminated with salicylic acid at 250 nm with a 1 cm cuvette. The absorbance was 0.320. A sample containing 0.67 ppm salicylic acid had an absorbance of 0.419. What was the concentration of salicylic acid in the first sample
The concentration of salicylic acid in the first water sample was 0.512 ppm.
We'll use the Beer-Lambert Law to find the concentration of salicylic acid in the first sample.
Step 1: Determine the molar absorptivity constant (ε) using the known sample:
A = εbc
0.419 = ε(1 cm)(0.67 ppm)
ε = 0.419 / (1 cm × 0.67 ppm) = 0.625 ppm⁻¹cm⁻¹
Step 2: Calculate the concentration of salicylic acid in the first sample:
A = εbc
0.320 = (0.625 ppm⁻¹cm⁻¹)(1 cm)(c)
c = 0.320 / (0.625 ppm⁻¹cm⁻¹ × 1 cm) = 0.512 ppm
So, the concentration of salicylic acid in the first water sample was 0.512 ppm.
To know more about salicylic acid visit:
https://brainly.com/question/14635153
#SPJ11
A sample of nitrogen gas is produced in a reaction and collected under water in a graduated cylinder. The temperature is 26.0 oC and the volume of the gas is 45.7 mL. During the experiment, the total pressure in the graduated cylinder is 757 mmHg. How many grams of nitrogen were collected
During the experiment, the total pressure in the graduated cylinder is 757 mmHg, and 0.0421 grams of nitrogen is collected.
To solve this problem, we need to use the ideal gas law equation: PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature.
First, we need to convert the temperature from Celsius to Kelvin:
T = 26.0 + 273.15 = 299.15 K
Next, we need to convert the pressure from mmHg to atm:
P = 757 mmHg / 760 mmHg/atm = 0.995 atm
Now we can rearrange the ideal gas law equation to solve for n, the number of moles of nitrogen gas:
n = PV/RT
Plugging in the given values, we get:
n = (0.995 atm)(0.0457 L)/(0.0821 L·atm/mol·K)(299.15 K) = 0.00150 moles of nitrogen gas
Finally, we can use the molar mass of nitrogen (28.01 g/mol) to convert moles to grams:
grams of nitrogen = 0.00150 moles x 28.01 g/mol = 0.0421 g
Therefore, 0.0421 grams of nitrogen were collected.
To know more about ideal gas law:
https://brainly.com/question/27870704
#SPJ11
How many kilojoules of heat are absorbed when 40.4 g of MgO(s) is decomposed into Mg(s) and O2(g) at constant pressure
143.7 kJ of heat are absorbed when 40.4 g of MgO(s) is decomposed into Mg(s) and [tex]O_{2}[/tex](g) at constant pressure.
The decomposition of 40.4 g of MgO(s) into Mg(s) and [tex]O_{2}[/tex](g) at constant pressure is an exothermic reaction. The balanced chemical equation for this reaction is:
2 MgO(s) → 2 Mg(s) + [tex]O_{2}[/tex](g)
According to the equation, 2 moles of MgO(s) produce 2 moles of Mg(s) and 1 mole of [tex]O_{2}[/tex](g). The molar mass of MgO is 40.3 g/mol, and the molar mass of Mg is 24.3 g/mol.
Therefore, the number of moles of MgO(s) in 40.4 g is= 40.4 g / 40.3 g/mol = 1.00 mol
This means that the reaction produces 1.00 mol of Mg(s) and 0.50 mol of [tex]O_{2}[/tex](g).
The standard enthalpy change of decomposition for MgO(s) is -143.7 kJ/mol. This means that the reaction releases 143.7 kJ of heat per mole of MgO(s) decomposed.
Therefore, the total amount of heat released when 40.4 g of MgO(s) is decomposed into Mg(s) and [tex]O_{2}[/tex](g) is= 143.7 kJ/mol x 1.00 mol = 143.7 kJ
So, 143.7 kJ of heat are absorbed when 40.4 g of MgO(s) is decomposed into Mg(s) and [tex]O_{2}[/tex](g) at constant pressure.
To know more about enthalpy visit:
https://brainly.com/question/16720480
#SPJ11
If 200 grams of water are put into an 85.0 g Aluminum calorimeter with a 5.00 g Copper coil and are allowed to come to equilibrium at 23 oC How much heat energy is developed to raise the temperature to 34 oC
The heat energy developed to raise the temperature of the system from 23°C to 34°C is 7905 J.
The heat energy developed can be calculated using the formula:
q = (m_Al * C_Al * ΔT) + (m_Cu * C_Cu * ΔT) + (m_H2O * C_H2O * ΔT)
where q is the heat energy developed, m_Al, m_Cu, and m_H2O are the masses of aluminum, copper, and water, respectively, C_Al, C_Cu, and C_H2O are their respective specific heat capacities, and ΔT is the change in temperature.
We can assume that the calorimeter is an isolated system, so the heat gained by the water, aluminum, and copper is equal to the heat lost by the surroundings. Therefore:
q = -q_surroundings
The heat lost by the surroundings can be calculated using the formula:
q_surroundings = C_env * ΔT
where C_env is the heat capacity of the surroundings (in this case, the calorimeter and the air around it).
Substituting the values given in the problem, we get:
q = -(85.0 g * 0.900 J/g°C * (34°C - 23°C) + 5.00 g * 0.385 J/g°C * (34°C - 23°C) + 200 g * 4.184 J/g°C * (34°C - 23°C))
q = -(-7905 J)
q = 7905 J
To know more about heat energy, refer here:
https://brainly.com/question/29210982#
#SPJ11
5. The rate constant of the reaction between CO2 and OH2 in aqueous solution to give the HCO3- ion is 1.5 x 1010 M-1s-1 at 25 oC. Determine the rate constant at human body temperature (37 oC), given that the activation energy for the reaction is 38 kJ/mol.
The rate constant of the reaction between CO₂ and OH₂ in aqueous solution to give the HCO₃⁻ ion at human body temperature is 2.49 x 10¹⁰ M⁻¹ s⁻¹.
We can use the Arrhenius equation to find the rate constant at human body temperature:
k2 = A2 * exp(-Ea/RT2)
where k2 is the rate constant at human body temperature, A2 is the pre-exponential factor (the frequency factor), Ea is the activation energy, R is the gas constant, and T2 is the temperature in Kelvin (310 K for 37 oC).
We are given that:
k1 = 1.5 x 10¹⁰ M⁻¹ s⁻¹ (rate constant at 25 oC)
Ea = 38 kJ/mol
To find the pre-exponential factor at human body temperature, we need to know the activation energy dependence on temperature, which is not given.
However, we can make a reasonable assumption that the activation energy does not change significantly over the relatively small temperature range between 25 oC and 37 oC. With this assumption, we can use the pre-exponential factor at 25 oC as an approximation for A2:
A2 = A1 = k1 / exp(-Ea/RT1)
where R is the gas constant and T1 is the temperature in Kelvin (298 K for 25 oC).
Substituting the given values:
A2 = A1 = (1.5 x 10¹⁰ M⁻¹ s⁻¹) / exp(-38000 J/mol / (8.314 J/mol*K * 298 K))
= 6.47 x 10¹² M⁻¹ s⁻¹
Now we can use the Arrhenius equation to find k2:
k2 = A2 * exp(-Ea/RT2)
= (6.47 x 10¹² M⁻¹ s⁻¹) * exp(-38000 J/mol / (8.314 J/mol*K * 310 K))
= 2.49 x 10¹⁰ M⁻¹ s⁻¹
To know more about the rate constant refer here :
https://brainly.com/question/14977272#
#SPJ11
The phenomenon called __________ contraction is responsible for the great similarity in atomic size and chemistry of 4d and 5d elements.
Answer:
I believe it would be the Lanthanide Contraction.
Explanation:
Hope this helps! :)
The phenomenon called "relativistic contraction" is responsible for the great similarity in atomic size and chemistry of 4d and 5d elements.
Relativistic contraction occurs when the speed of an electron approaches the speed of light, causing the electron to experience relativistic effects that result in a contraction of the electron cloud. This contraction is greater for heavier elements, such as those in the 4d and 5d series, due to their higher nuclear charges.
As a result, the atomic radii of these elements are very similar, which leads to similar chemical properties. Additionally, relativistic effects can also affect the energies of atomic orbitals, which can further influence the chemical behavior of these elements.
Overall, relativistic contraction is an important factor in understanding the properties of 4d and 5d elements.
To know more about relativistic contraction click on below link :
https://brainly.com/question/9864983#
#SPJ11
While many elemental spectral lines are visible, almost all molecular lines lie in the _____ portion of the spectrum, since they are at much lower energy.
While many elemental spectral lines are visible, almost all molecular lines lie in the __infrared___ portion of the spectrum, since they are at much lower energy.
What are spectral lines ?
A spectral line is a dim or shining line in a spectrum that is otherwise uniform and continuous, caused by an excess or shortage of photons in a specific frequency range in comparison to frequencies closer to it.
Infrared waves, or infrared light, are part of the electromagnetic spectrum. People encounter Infrared waves every day; the human eye cannot see it, but humans can detect it as heat. A remote control uses light waves just beyond the visible spectrum of light—infrared light waves
Therefore, infrared portion of the spectrum is the part where molecular lines lie.
To know more about electromagnetic from the given link:
https://brainly.com/question/24319848
#SPJ4
Use the information below to calculate the equilibrium constant (Keq) for the following reactions. C (5) + CO2 (8) + > 2C0 (g)
At equilibrium [CO2] = 8.3 × 10° M.
[CO] = 5.4 × 10-5 M
The equilibrium constant of the reaction is 3.5 * 10^-10
What is the equilibrium constant?A quantitative indicator of the location of a chemical equilibrium in a chemical reaction is the equilibrium constant, abbreviated as K. With each concentration raised to the power of its stoichiometric coefficient, it is the ratio of the product concentrations to the reactant concentrations at equilibrium.
We know that;
The balanced reaction equation is CO2 (g) + C (s) → 2 CO (g)
Keq = [CO]^2/[CO2]
Keq = ( 5.4 × 10^-5)^2/(8.3 × 10°)
Keq = 3.5 * 10^-10
Learn more about equilibrium constant:https://brainly.com/question/30620209
#SPJ1
A 2 cation of a certain transition metal has six electrons in its outermost d subshell. Which transition metal could this be
A 2+ cation of a certain transition metal has six electrons in its outermost d subshell. This transition metal is Iron (Fe) .
To identify the transition metal with a 2+ cation having six electrons in its outermost d subshell, we need to understand the electron configuration of transition metals and their cations.
A transition metal is an element found in the d-block of the periodic table, and these metals are characterized by having partially filled d orbitals. The outermost d subshell refers to the d orbitals of the highest energy level in the electron configuration.
In this case, we're looking for a transition metal with a 2+ cation that has six electrons in its outermost d subshell. This means the neutral atom would have eight electrons in its outermost d subshell, as the 2+ cation loses two electrons.
The transition metal that fits this description is Iron (Fe), which has an atomic number of 26. Its electron configuration is [Ar] 4s2 3d6 for the neutral atom. When it forms a 2+ cation (Fe2+), it loses the two 4s electrons, resulting in the electron configuration [Ar] 3d6 (noble gas configuration) or 1s2 2s2 2p6 3s2 3p6 3d6 (electronic configuration) . This Fe2+ cation has six electrons in its outermost d subshell, making it the transition metal you are looking for.
Learn more about transition metal : https://brainly.com/question/2879928
#SPJ11
The pressure of a sample of argon gas was increased from 1.83 atm to 6.67 atm at constant temperature. If the final volume of the argon sample was 11.7 L, what was the initial volume of the argon sample
The initial volume of the argon sample was 42.7 L.
To solve this problem, we can use the combined gas law:
(P1V1)/T1 = (P2V2)/T2
where P1, V1, and T1 are the initial pressure, volume, and temperature, respectively, and P2, V2, and T2 are the final pressure, volume, and temperature, respectively.
Since the temperature is constant, we can simplify the equation to:
P1V1 = P2V2
Plugging in the given values, we get:
P1 = 1.83 atm
V2 = 11.7 L
P2 = 6.67 atm
So, rearranging the equation to solve for V1, we get:
V1 = (P2V2)/P1 = (6.67 atm x 11.7 L)/1.83 atm = 42.7 L
to know more about combined gas law refer here:
https://brainly.com/question/30458409#
#SPJ11
Many processed foods and beverages benefit from pectin's ability to... All of the answers are correct. improve texture of frozen products by controlling ice crystal size. prevent loss of syrup during the thawing of frozen products. evenly distribute added substances that would normally sink to the bottom of a product. increase viscosity of liquids.
Pectin's ability to improve texture, stability, and flavor makes it a valuable ingredient in many processed foods and beverages. The correct answer is "All of the answers are correct".
Pectin is a complex carbohydrate that is commonly found in fruits and vegetables. It is widely used in the food industry as a thickening agent, stabilizer, and gelling agent.
One of the key benefits of pectin is its ability to improve the texture of processed foods and beverages.
For example, when added to frozen products, pectin can help to control the size of ice crystals that form during the freezing process. This helps to prevent the formation of large ice crystals that can cause the product to become icy or gritty in texture.
Pectin can also help to prevent the loss of syrup during the thawing process, which helps to maintain the product's overall texture and flavor.
In addition, pectin can be used to evenly distribute added substances such as fruit pieces, nuts, or chocolate chips throughout a product. Without pectin, these substances would tend to sink to the bottom of the product, resulting in an uneven texture and flavor.
Finally, pectin can also be used to increase the viscosity of liquids, making them thicker and more stable. This is particularly useful in products such as fruit juices and jams, where a thicker, more spreadable consistency is desired.
to know more about Pectin refer here:
https://brainly.com/question/24100150#
#SPJ11
In the presence of oxygen, the three-carbon compound pyruvate can be catabolized in the citric acid cycle. First, however, the pyruvate (1) loses a carbon, which is given off as a molecule of CO2, (2) is oxidized to form a two-carbon compound called acetate, and (3) is bonded to coenzyme A. These three steps result in the formation of
The catabolism of pyruvate in the presence of oxygen results in the production of ATP and CO2.
In aerobic respiration, the process of breaking down glucose begins with glycolysis, which produces pyruvate. In the presence of oxygen, pyruvate can then be further catabolized in the citric acid cycle. However, before entering the cycle, pyruvate goes through several steps. First, it loses a carbon atom, which is released as a molecule of CO2. Second, pyruvate is oxidized, which produces a two-carbon compound called acetate. Third, acetate is bonded to coenzyme A, forming acetyl CoA. This step releases another molecule of CO2 and produces FADH2. The resulting acetyl CoA then enters the citric acid cycle, where it undergoes a series of reactions that produce NADH, FADH2, ATP, and more CO2.
learn more about aerobic respiration refer: https://brainly.com/question/12605249
#SPJ11
A parallel collimator is used in order to localize the source of gamma emission during SPECT imaging. This is necessary because in the absence of the collimator:
In the absence of a parallel collimator during SPECT imaging, the gamma rays emitted from the source would travel in multiple directions and result in blurred and scattered images.
What is a parallel collimator?
A parallel collimator is used in order to localize the source of gamma emission during SPECT imaging. This is necessary because, in the absence of the collimator, the gamma photons emitted from different points in the source would reach the detector without any directionality, leading to blurred and indistinguishable images. The parallel collimator ensures that only gamma photons traveling parallel to the collimator's axis reach the detector, creating a clearer and more accurate representation of the gamma emission source.
The collimator is designed to only allow gamma rays that are traveling parallel to the collimator's axis to pass through, thus creating a focused beam and allowing for accurate localization of the source of gamma emission.
To know more about Parallel Collimator:
https://brainly.com/question/29036237
#SPJ11
Question 1 - A glass of cold milk sometimes forms a coat of water on the outside of the glass (often referred to as 'sweat'). How does most of the water get there
condensation.
the hot air around the cold glass cools down into water droplets.
10 . Combing your hair leads to excess electrons on the comb. How fast would you have to move the comb up and down to produce red light
Combing your hair can indeed cause excess electrons to accumulate on the comb due to friction between the comb and your hair. However, the speed at which you move the comb up and down does not determine the color of light produced.
The color of light produced depends on the energy of the electrons as they move between energy levels in an atom or molecule. When an electron moves from a higher energy level to a lower energy level, it emits a photon of light. The energy of the photon determines its wavelength and, therefore, its color.
Red light has a wavelength of approximately 620-750 nanometers. To produce red light, the electrons in a material would need to lose energy corresponding to this wavelength. However, the energy required to produce red light is much higher than the energy produced by combing your hair.
In summary, combing your hair does not produce light with a high enough energy to produce red light, regardless of how fast you move the comb up and down.
For more question on electrons click on
https://brainly.com/question/26084288
#SPJ11
In a thermonuclear device, the pressure of 0.050 liters of gas within the bomb casing reaches 4.0 x 106 atm. When the bomb casing is destroyed by the explosion, the gas is released into the atmosphere where it reaches a pressure of 1.00 atm. What is the volume of the gas after the explosion
The volume of the gas after the explosion is 0.025 liters.
Using the formula for the ideal gas law, PV=nRT, we can solve for the number of moles of gas in the bomb casing before the explosion:
PV=nRT
(4.0 x [tex]10^6[/tex] atm)(0.050 L)=n(0.08206 L•atm/mol•K)(298 K)
n=0.000988 mol
Since the number of moles of gas is conserved, we can use PV=nRT again to solve for the volume of gas after the explosion:
PV=nRT
(1.00 atm)(V)=(0.000988 mol)(0.08206 L•atm/mol•K)(298 K)
V=0.025 L or 25.0 mL
Therefore, the volume of gas after the explosion is 0.025 liters or 25.0 milliliters.
Learn more about ideal gas law on: https://brainly.com/question/27870704
#SPJ11
In radioactive dating, the ratio of carbon-12 to carbon-14 is related to the time of death of the animal or plant under investigation. True or False
True. The ratio of carbon-12 to carbon-14 is used to determine the age of organic materials through radioactive dating.
What is Radiocarbon dating?In radioactive dating, the ratio of carbon-12 to carbon-14 is related to the time of death of the animal or plant under investigation. This method, known as radiocarbon dating, measures the decay of carbon-14 over time, providing an estimate of the age of the specimen. As carbon-14 decays over time, the ratio changes, allowing scientists to estimate how long it has been since the organism died.
Carbon-14 is a radioactive isotope of carbon that is constantly formed in the atmosphere by cosmic rays, and it decays over time at a known rate. When an organism dies, it stops taking in carbon-14, and the carbon-14 that was in its body begins to decay. By measuring the ratio of carbon-12 to carbon-14 in a sample and comparing it to the known ratio of carbon-12 to carbon-14 in the atmosphere, scientists can determine how long it has been since the organism died.
To know more about Radiocarbon Dating:
https://brainly.com/question/17649598
#SPJ11
the rate of decay of a radioactive substance is proportional to the amount of substance presenat any time t. In 1840 there were 50 grams of the substance and in 1910 there were 35 grams. To the nearest gram, how many grams remain is 1990
The radioactive substance that will remain after 150 years will be 35.09grams.
A radioactive material's decay rate is proportional to the amount of substance present at any moment t. This indicates that as time passes, the amount of substance left drops at a rate proportionate to the amount of substance present at the moment. This can be modeled using the formula:
[tex]A = A_{0} e^{-kt}[/tex]
Where A represents the quantity of substance at time t, A0 represents the initial amount of substance, k represents the decay constant, and t is the time passed.
We can calculate the decay constant k using the information provided. We know that there were 50 grams of the material in 1840 and 35 grams in 1910. This means that:
[tex]35 = 50 e^{(-k(1910-1840)}[/tex]
[tex]35/50 = e^{(-k(70))}\\7/10 = e^{(-k(70)}\\ln(7/10) = ln(e^{(-k(70)}\\ln(7/10) = -k(70)[/tex]
k = -(ln(7/10))/70
k= 0.002363
To find the amount of substance remaining in 1990, we can plug in t = 1990-1840 = 150 into the formula:
[tex]A = 50 e^{(-0.002363*150)}[/tex]
-0.002363*150 = -0.35445
[tex]e^{(-0.35445)}[/tex] ≈ 0.7018
A = 50 * 0.7018 ≈ 35.09
A ≈ 35.09g
Therefore, to the nearest gram, approximately 35.09grams of the substance remained in 1990.
Learn more about Decay Rate:
https://brainly.com/question/29224203
#SPJ4
Use the table to solve for H andAS, then use those numbers to solve forAG (AG=AH - TAS)
a) Ni(s) +C/218) --> NiC|2(8)
b) CaCO3(s, calcite) --> CaO(s) + CO2(8)
A double displacement reaction occurs when two reactants swap their ions to generate two distinct products. The enthalpy of formation for Ni(s) is 0 kJ/mol, whereas the enthalpy of formation for CaCO3(s) is -1206.9 kJ/mol, according to the table.
NiC2(s) has a formation enthalpy of -51.8 kJ/mol while CaO(s) has a formation enthalpy of -635.4 kJ/mol. CO2(g) has a formation enthalpy of -393.5 kJ/mol. We may compute AG for the above reaction using the provided equation, AG=AH-TAS. First, we must compute AH and TAS.
The total of the enthalpies of production of the products less the sum of the enthalpies of formation of the reactants yields AH. TAS is determined by adding the entropies of The total of the entropies of product formation minus the sum of the entropies of reactant formation.
AH = -2080.7 kJ/mol (-51.8 + -635.4 + -393.5) - (0 + -1206.9) TAS = (-0 + 213.8) - (-0) = 213.8 J/K.mol We may compute AG for the reaction using these variables. TAS = -2080.7 - (213.8/1000) = -2081.9 kJ/mol AG = AH
Learn more about reaction at:
https://brainly.com/question/17434463
#SPJ1
A 3 cation of a certain transition metal has one electron in its outermost d subshell. Which transition metal could this be
Transition elements (also known as transition metals) are elements that have partially filled d orbitals. IUPAC defines transition elements as an element having a d subshell that is partially filled with electrons, or an element that has the ability to form stable cations with an incompletely filled d orbital.
If a 3+ cation of a certain transition metal has one electron in its outermost d subshell, then we know that the electron configuration of the neutral atom must have been [noble gas] (n-1)d1 ns2, where n is the principal quantum number. The transition metal with this electron configuration is Scandium (Sc), which has an atomic number of 21. When Sc loses three electrons to form the 3+ cation, it loses the two electrons in the ns subshell and one of the electrons from the (n-1)d subshell, leaving it with a single electron in the outermost d subshell.
To know more about Transition metal please visit
https://brainly.com/question/31803138
#SPJ11
If 2 grams of water absorbs 20 calories of heat, the resulting water temperature change is ________.
If 2 grams of water absorbs 20 calories of heat, the resulting water temperature change is a rise of 10 degrees Celsius.
This is because water has a specific heat capacity of 1 calorie/gram/degree Celsius, meaning it takes 1 calorie of heat to raise 1 gram of water by 1 degree Celsius. Therefore, 20 calories of heat can raise 2 grams of water by 10 degrees Celsius (20 calories / 2 grams / 1 calorie/gram/degree Celsius = 10 degrees Celsius).
When 2 grams of water absorbs 20 calories of heat, the resulting water temperature change can be determined using the specific heat formula. The specific heat of water is 1 calorie/g°C. Using the formula, q = mcΔT, where q is heat in calories, m is mass in grams, c is specific heat, and ΔT is temperature change:
20 calories = (2 g)(1 cal/g°C)(ΔT)
Solving for ΔT, we get:
ΔT = 20 calories / (2 g × 1 cal/g°C) = 10°C
The resulting water temperature change is 10°C.
For more information on Heat capacity visit:
brainly.com/question/28921175
#SPJ11
What is the relative humidity for a parcel of air with 6 millibars vapor pressure and 30 millibars saturation vapor pressure
The relative humidity for a parcel of air with 6 millibars vapor pressure and 30 millibars saturation vapor pressure is 20%.
The amount of water vapor in an air-water mixture relative to the maximum amount possible is known as relative humidity (RH). Relative humidity is a ratio of the humidity of a specific water-air mixture and the saturation humidity ratio at a particular temperature.
It can be calculated using the formula:
Relative humidity = (vapor pressure / saturation vapor pressure) x 100%
Substituting the given values:
Relative humidity = (6 / 30) x 100% = 20%
Therefore, the relative humidity for this parcel of air is 20%.
To learn more about relative humidity visit:
https://brainly.com/question/30765788
#SPJ11
Ammonium formate, NH4(HCOO), dissolves in water to give ammonium ions and formate ions. These ions then undergo an unfavorable and endothermic Brønsted acid- base reaction according to this equation:
NH4+ (aq) + HCOO– (aq) NH3 (aq) + HCOOH (aq)
Keq < 1 (at 298 K)
∆Horxn > 0
(a) (8 pts.) Calculate Keq and ∆Gorxn (at 298 K) for equation (19).
(b) (6 pts.) Qualitatively, would one expect ∆Sorxn for equation (19) to be positive or negative? Briefly justify your answer.
(c) (10 pts.) If 1.00 mol NH4(HCOO) is dissolved in 1.00 L water at 298 K, what is the pH of the solution?
(d) (7 pts.) The solution from part (c) (1.00 mol NH4(HCOO) in 1.00 L water) can be made into an effective buffer at pH = 3.00 by the addition of either NaOH or HCl. Specify whether NaOH or HCl would be required, and whether more than 0.500 or less than 0.500 mol of the reagent would be needed.
(e) (8 pts.) Consider the solution from part (c) (1.00 mol NH4(HCOO) in 1.00 L water at 298 K). For each of the changes below, circle the effect on the concentration of NH3 (aq) at equilibrium after the change is made, and briefly give the reasoning for your choice.
NH4+ (aq) + HCOO– (aq) NH3 (aq) + HCOOH (aq)
Keq < 1 (at 298 K)
∆Horxn > 0
(i) The temperature of the solution is increased to 340 K.
[NH3] increases [NH3] decreases [NH3] does not change
Explanation:
(ii) The volume of the solution is increased to 2.00 L by adding 1.00 L water.
[NH3] increases [NH3] decreases [NH3] does not change
Explanation:
To calculate Keq and ∆Gorxn, you would need additional information, such as the equilibrium concentrations of each species. The ∆Gorxn can be calculated using the equation ∆Gorxn = -RTln(Keq), where R is the gas constant and T is the temperature in Kelvin.
We would expect ∆Sorxn to be negative since the reaction results in fewer moles of gas, and there is a decrease in the overall disorder of the system.
To calculate the pH of the solution, you need to determine the concentrations of NH4+ and HCOO- ions after the dissolution of NH4(HCOO) and then use the Henderson-Hasselbalch equation: pH = pKa + log([A-]/[HA]), where [A-] is the concentration of formate ions and [HA] is the concentration of ammonium ions.
To create an effective buffer at pH 3.00, HCl would be required to lower the pH. The exact amount needed would depend on the initial concentrations of NH4+ and HCOO- ions and their pKa values.
(i) [NH3] increases. Since the reaction is endothermic, increasing the temperature will shift the equilibrium to the right, producing more NH3.
(ii) [NH3] does not change. Adding water will dilute the solution, but the ratio of products to reactants remains constant. Therefore, the concentration of NH3 at equilibrium does not change.
To know more about equilibrium
https://brainly.com/question/517289
#SPJ11
If one were to construct a galvanic cell consisting of two Zn2 /Zn electrodes at two different concentrations, the more concentrated cell will be the _____. Multiple choice question. cathode anode
If one were to construct a galvanic cell consisting of two Zn2 /Zn electrodes at two different concentrations, the more concentrated cell will be the anode
In a galvanic cell, the more concentrated solution is typically associated with the anode, while the less concentrated solution is associated with the cathode. This is because, in the anode compartment, the metal electrode undergoes oxidation and releases metal ions into solution, resulting in an increase in the concentration of metal ions.
In contrast, in the cathode compartment, metal ions from the solution are reduced onto the metal electrode, resulting in a decrease in the concentration of metal ions.
Therefore, in the case of a galvanic cell consisting of two Zn2+/Zn electrodes at two different concentrations, the more concentrated cell would be associated with the anode.
Learn more about galvanic cell,
https://brainly.com/question/13031093
#SPJ4
Full Question: If one were to construct a galvanic cell consisting of two Zn2 /Zn electrodes at two different concentrations, the more concentrated cell will be the _____. Multiple choice questions.
cathode anodeWrite the balanced equation and solubility product equation for the dissolution of potassium dichromate (K2Cr2O7).
The balanced equation for the dissolution of potassium dichromate (K₂Cr₂O₇) in water is:
K₂Cr₂O₇(s) + H₂O(l) → 2K⁺(aq) + Cr₂O₇²⁻(aq)
The solubility product equation for potassium dichromate is:
Ksp = [K⁺]²[Cr₂O₇²⁻]
The balanced equation represents the dissolution of potassium dichromate in water, where solid K₂Cr₂O₇ dissolves to form aqueous ions K⁺ and Cr₂O₇²⁻. The solubility product equation, denoted by Ksp, is an expression that relates the concentrations of ions in a saturated solution of a sparingly soluble salt to its solubility.
In this case, the solubility product equation for potassium dichromate is given by [K⁺]²[Cr₂O₇²⁻], where [K⁺] and [Cr₂O₇²⁻] represent the concentrations of potassium ions and dichromate ions, respectively, in the saturated solution.
The solubility product constant, Ksp, is a constant value that depends on the temperature and can be used to determine the solubility of potassium dichromate in water at a given temperature.
To know more about potassium dichromate refer here:
https://brainly.com/question/25968589#
#SPJ11
Complete combustion of 5.00 g of a hydrocarbon produced 15.4 g of CO2 and 7.10 g of H2O. What is the empirical formula for the hydrocarbon? Insert subscripts as necessary.
The empirical formula for the hydrocarbon is CH₂.
The combustion reactions are :
C + O₂ --> CO₂
H₂ + 1/2 O₂ --> H₂O
The molar mass of CO₂ =b 44 g/mol
The Mass of Carbon, C = (15.4 g CO₂)(1mol/44g)(1 mol C/1 mol CO₂)(12 g/mol)
The Mass of Carbon, C = 4.2 g C
The Mass of H = 5 - 4.2
The Mass of H = 0.8 g
The Moles C = 4.2 / 12 = 0.35
The Moles H = 0.8 / 1 = 0.8
Dividing by the smallest one :
The Moles of C = 1
The Moles of H = 2
The empirical formula of the hydrocarbon is CH₂ with the complete combustion of the 5 g of hydrocarbon.
To learn more about empirical formula here
https://brainly.com/question/14044066
#SPJ4
The first small solid grains or flakes formed in our Solar System by the process of ____, the addition of material to an object an atom or molecule at a time. Group of answer choices accretion sublimation hydration condensation
The first small solid grains or flakes formed in our Solar System by the process of condensation, the addition of material to an object an atom or molecule at a time.
This process occurs when the temperature and pressure of the gas or vapor are lowered to a point where the particles can come together and form a solid. In the early Solar System, dust and gas were present in a cloud around the Sun.
As the temperature and pressure decreased with increasing distance from the Sun, the gas and dust began to condense into solid grains. These grains then stuck together through a process called accretion, forming larger and larger bodies, including the planets, moons, and asteroids.
To know more about the Solar System refer here :
https://brainly.com/question/18365761#
#SPJ11
Sarah and Keith are making candy for a holiday party and begin to argue about whether the melting sugar is a chemical or physical change. Keith says his teacher, Ms. Ortega, said physical changes are only a change in the state of matter, not a change in the chemicals that make up the material. Sarah argues that melting sugar is a change in the chemical makeup of the sugar because it doesn't look like sugar anymore. Who is right?
Keith is mostly correct. Melting sugar is a physical change, not a chemical change. In a physical change, the substance undergoes a change in its physical state, such as melting or freezing, without any change in its chemical composition.
The sugar molecules remain the same, just in a different physical state. So when sugar is melted, it is still sugar chemically, even though it looks different in its liquid form.
On the other hand, in a chemical change, the substance undergoes a change in its chemical composition, resulting in the formation of one or more new substances with different chemical properties. For example, when sugar is burned, it undergoes a chemical change, producing carbon dioxide and water, which have different chemical properties than sugar.
So while Sarah is right that melted sugar looks different, this change in appearance is due to a physical change rather than a chemical change.
For more question on sugar click on
https://brainly.com/question/397060
#SPJ11
A solution has an initial concentration of acid HA of 1.4 M. If the equilibrium hydronium ion concentration is 0.12 M, what is the percent ionization of the acid
To find the percent ionization of the acid, we first need to calculate the initial concentration of hydronium ions (H3O+).
HA + H2O ⇌ H3O+ + A-
Initial concentration of HA = 1.4 M
Equilibrium concentration of H3O+ = 0.12 M
Using the equilibrium constant expression for acid dissociation (Ka):
Ka = [H3O+][A-] / [HA]
Assuming the concentration of A- is negligible compared to HA, we can simplify the expression to:
Ka = [H3O+]^2 / [HA]
Rearranging the expression to solve for [H3O+], we get:
[H3O+] = sqrt(Ka x [HA])
We can look up the Ka value for HA (or calculate it if given enough information) and substitute the values:
Ka = [H3O+]^2 / [HA]
1.8 x 10^-5 = [H3O+]^2 / 1.4
[H3O+] = 0.0079 M
Now we can calculate the percent ionization:
% Ionization = ([H3O+] / [HA]) x 100
% Ionization = (0.0079 / 1.4) x 100
% Ionization = 0.56%
Therefore, the percent ionization of the acid is 0.56%.
Hi! To find the percent ionization of the acid, you'll need to use the given initial concentration of the acid HA (1.4 M) and the equilibrium hydronium ion concentration (0.12 M). Percent ionization can be calculated using the formula:
Percent Ionization = (Equilibrium Hydronium Concentration / Initial Concentration of Acid HA) × 100
Percent Ionization = (0.12 M / 1.4 M) × 100 ≈ 8.57%
The percent ionization of the acid is approximately 8.57%.
To know more ionisation of acid visit:
https://brainly.com/question/21897096
#SPJ11