A researcher reported the results from a particular experiment to the scientist who conducted it. The report states that on one specific part of the experiment, a statistical test result yielded a p-value of 0. 18. Based on this p-value, what should the scientist conclude?



The test was not statistically significant because 2 × 0. 18 = 0. 36, which is less than 0. 5.


The test was not statistically significant because if the null hypothesis is true, one could expect to get a test statistic at least as extreme as that observed 18% of the time.


The test was not statistically significant because if the null hypothesis is true, one could expect to get a test statistic at least as extreme as that observed 82% of the time.


The test was statistically significant because a p-value of 0. 18 is greater than a significance level of 0. 5.


The test was statistically significant because p = 1 − 0. 18 = 0. 82, which is greater than a significance level of 0. 5

Answers

Answer 1

The researcher reported the results of a specific experiment to the scientist who conducted it.

A statistical test result yielded a p-value of 0.18. Based on this p-value, the scientist should conclude that the test was not statistically significant because if the null hypothesis is true, one could expect to get a test statistic at least as extreme as that observed 18% of the time.

A p-value is a statistical term that measures how likely a set of data is to occur by chance.

It aids in the interpretation of statistical significance by determining the degree of evidence against a null hypothesis. The p-value is calculated after performing a hypothesis test to decide whether or not a set of data is important.

The null hypothesis, which is often denoted by H0, is the hypothesis that a parameter's value equals a specified value, and it is generally the assumption that researchers seek to reject.

Statistical significance refers to the degree to which an observed effect in a sample reflects a true effect in the general population. It determines if a research hypothesis can be accepted or rejected by measuring the probability of the results happening by chance.

In other words, it refers to the probability that a research finding can be ascribed to chance rather than to an experimental intervention.

To know more about the word reflects visits :

https://brainly.com/question/27378284

#SPJ11


Related Questions

Solve using elimination
x+y=7
x-y=-3

Answers

Answer:

I think it's 4

Step-by-step explanation:

if x+y is 7 and x-y is 3 then the answer is 4

Answer:

X=2, y=5

Step-by-step explanation:

X+y=7

x-Y=-3

————-

2x+ 0 =4

2x=4

x=2

solve for y using either equation

x+y=7

2+y=7

y=5

check answers by substituting x and y value in either equation:

x+y=7

2+5=7

7=7

or

x-y=-3

2-5=-3

-3=-3

what does 19+r=
PLEASE HELP

Answers

Okay so since there aren’t any values that r is equal to 19 plus r is equal to 19r. I’m pretty sure that’s the answer

Find the rule. Solve for n.

Answers

Answer:

X is always 1+ bigger than Y

EX: if you have y as 9, X will be 10

Step-by-step explanation:

N = 9

What is the solution of 2.5z = 27.5

Answers

z=11 is the answer for this problem

Let's solve your equation step-by-step.

2.5z=27.5

Step 1: Divide both sides by 2.5.

2.5z/ 2.5 = 27.5/ 2.5

z=11

Answer:

z=11

The highest point in Chicago is 735 feet above sea level. You can represent that numerically using .

Answers

Answer:

+735 feets

Step-by-step explanation:

Points or position above sea level are denoted with positive elevation values while points or positions below sea level are denoted by negative values. The sea level position itself could be viewed as a midpoint such as the position of 0 on a number line ; where distances to the right are positive and distances to the left are negative.

Hence, a point which is said to be 735 feets above sea level would have an equivalent numeric representation of +735 feets

If Ms. Wong takes out a loan of 85000 dollars with a simple interest of 5% annually, how much would she have to pay in 2 years if she returns 35000 after the first year? Show your work and your thinking.

(PLEASE HELP !!)

Answers

85,000 + 5% = 89,250 , 85,000- 35,000 = 50,000* 5% = 52,500 so
Answer = 6,760 in interest + the original 85,000 = 91,750

Simplify

(2a²b)(4ab)

Answers

Answer:

8a^3b^2

Step-by-step explanation:

If line a and line b are parallel, which angles are same-side Interior angles?
A.23 and 211
B. 28 and 23
C. 27 and 23
D. none of these

Answers

Answer:

i think its C. 27 tp 23 ****

help please will give brainliess

Answers

Card 1= 20

Card 2= nOt sure

Card 3=28

Card 4= 40

Hope this helps!

card 4 hope it helps!

Solve for N.

N - 26 = 72
N - 26 +
= 72 +

N =

Answers

Answer:

98

Step-by-step explanation:

  Solve  :    n-98 = 0  

Add  98  to both sides of the equation :  

                     n = 98

Answer: N=98. 98-26=72

Part B: The weatherman claimed that the temperature on Friday was the opposite of Thursday’s temperature. Which of the following statements support this claim? Select all that apply.

A.
The temperatures on Thursday and Friday are opposites because they are on different sides of 0 on the number line.

B.
The temperatures on Thursday and Friday are opposites because they have a sum of 0.

C.
The temperatures on Thursday and Friday are opposites because they both contain a 3.

D.
The temperatures on Thursday and Friday are opposites because they are the same distance from 0 on the number line.

Answers

Answer:

it will be d

Step-by-step explanation:

because I had a assignment over this and I put d and got it correct

What is the relationship between the angle of depression of a person looking down from the top of a hill at their friend standing on the ground and the angle of elevation of the person on the ground looking up at their friend who is standing on top of the hill?


a. the angle of elevation will be greater than the angle of depression because the person has to look up from the ground to see their friend at the top of the hill

b. The angle of depression and angle of elevation will add to 180°

c. The angle of depression and angle of elevation will be the same

d.The angle of depression would be greater than the angle of elevation because the hill is higher than the ground​

Answers

Answer:

C) angle of depression and angle of elevation will be the same.

this is because the horizontal for angle of elevation and angle of depression are parallel

therefore, the two angles are same (alternate angles)

hope it helps.

pls mark brainliest !!!

The correct answer is (c) The angle of depression and angle of elevation will be the same.

What is an angle of depression?

When a person is standing on top of a hill and looking down at their friend standing on the ground, the angle formed between the line of sight and a horizontal line is called the angle of depression.

Similarly, when a person on the ground is looking up at their friend who is standing on top of the hill, the angle formed between the line of sight and a horizontal line is called the angle of elevation.

Since the two angles are formed by the same two points and are measured with respect to the same horizontal line, they will be congruent or the same. Therefore, option (c) is correct.

To know more about the angle of depression follow

https://brainly.com/question/27865363

#SPJ2

Tyrone has 16 model airplanes on his shelf. He has 4 times as many model airplanes as model trains. How many model trains does Tyrone have?


Write multiplication and division equations to model and solve the problem. Use m for the unknown

Answers

Step-by-step explanation:

4m = 16

divide both sides by 4

m = 4

he has 4 model trains

urgent urgent urgent plz

Answers

sorry for messy handwriting

It says 33cm it’s messed up because it’s on a laptop but what’s the volume of this sphere :)

Answers

Answer:

1.51*10^5 cm^3

Step-by-step explanation:

the formula for the volume of a sphere is (4/3)pi(radius)^3

I can't really tell if the 33 cm is for the radius or the diameter, but it looks like the radius, so

(4/3)*(33)^3*pi

simplify

Im assuming you can use a calculator because it's too hard to do without because it's a huge number

beş üzeri üç ekşi otuz bölübeş eksi iki üzeri iki işlemini sonucu aşağıdakilerden hangisidir?


A) 15


B) 78

C) 95

D) 115




cevaplarınızı bekliyorum.​

Answers

Ce clasă ești sa văd daca te pot ajuta

-3 + 4g = 7g. Solve for g.

Answers

Answer:

g=-1

Step-by-step explanation:

-3 + 4g= 7g

-4g. -4g

g=-1

Evaluate each expression when y=5.

B. 4(y+3)

Answers

Answer:

B. 4(y+3)=4(5+3)=4×8=32

Answer:

32

Step-by-step explanation:

Step 1: Sub y = 5 into the expression

Find anywhere that has a 'y' and replace it with a 5

4(y+3)

4(5+3)

Step 2: Solve

Use BEDMAS to solve the expression

4(5 + 3)

4(8)

32

Step 3: Therefore Statement

Therefore the expression is equal to 32

Solve the given equation
7/10X=4 3/5

Answers

Answer:

x

=

40

Step-by-step explanation:

Which of the following points fall above the line y = x ??
a) (2, 2)
b) (-4,-5)
c) (3, -3)
d) (6,4)
e) (0,9)

Answers

Answer:

a) (2,2)

Step-by-step explanation:

as X=2 and y=2

y=x

The answer should be A 2,2

Find the value of X:

Answers

Answer:

x=9

Step-by-step explanation:

I took one side, and made proportions:

12:16

3:4

so, x-1:6=3:4

(x-1)/6=3/4

solve it for x=9

Answer:

9

Step-by-step explanation:

Hope this helps!

Plz Mark Brainliest!

A family smoothie recipe calls for strawberry juice and apple juice. This equation represents the proportional relationship between the number of cups of strawberry juice (s) and apple juice (a) in the recipe.​

Answers

Answer:

21

Step-by-step explanation:

21 divided by 7 is three: to the third power of 11 so your answer is 21, I think

Will give brainliest

Answers

Answer:

c

Step-by-step explanation:

Answer:

I'm not 100% sure, but i think it's C. :)

Step-by-step explanation:

i think

for brainiest:):):):):)

Answers

Answer:

the ratio of wheat cereal to rice cereal is 1:6 and the value is 1/6 or 0.16666

Step-by-step explanation:

if 1 1/2 = 1/4 then ?=4/4

since we know the value of 1/4 we multiply 1 1/2x4=6 and 1/4x4=1 so the ratio is 1:6. The value of the ratio is the quotient, and the quotient of 1 and 6 is 1/6 or 0.16666

hope this helps sorry if im wrong and have a blessed day :)

Solve for the value of x

Answers

Answer:

x = 47°

Step-by-step explanation:

The secant- secant angle (x) is half the difference of the intercepted arcs, that is

x = [tex]\frac{1}{2}[/tex] (133 - 39)° = 0.5 × 94° = 47°

It is x=47 to your question p

PLEASE HELP ME ANYONE

Answers

i believe it’s (0,4) since it’s asking for vertex.

Solve the equation 3(f-1)+f= 1

Answers

Answer:

F = 1

Step-by-step explanation:

3(f-1) + f =

3(1 - 1) + 1 =

3(0) + 1 =

0 + 1 =

1

Therefore F = 1 hope this helped! Please give me a 5 star rating????

Answer: f=1

Step-by-step explanation: 3(f−1)+f=1

3(f−1)+f=1

(3)(f)+(3)(−1)+f=1

3f+−3+f=1

(3f+f)+(−3)=1

4f+−3=1

4f−3=1

4f−3+3=1+3

4f /4 = 4 /4

f=1

What’s the slope and y intercept?

Answers

Answer:

the slope is 15/2 and the y intercept is 0,0

P = R+C help I need to get out of class plz help

Answers

Answer:

People's Republic of China

PRC means People's Republic of China.

Step-by-step explanation:

What is PRC? History of rebranding

All products manufactured in China were automatically considered low-quality items for a long period. Even the famous brand or name of the manufacturing plant did not manage to change this stereotype.

China has been the world leader in exporting and manufacturing industrial output since 2014. For the last 50 years, over 370 thousand new factories have started working in the PRC. To reduce the prime cost of goods, a lot of factories have been moved from Europe to China. The remaining factories, for example, those in Germany, France, and Spain, make products for their home markets but produce all goods for export in China.

When you are choosing household appliances pay attention to labels. You will find that most products of highly popular brands are marked “Made in China”. However, it doesn’t mean that – say – a kitchen unit is an imitation of a real food processor from Moulinex, for instance. The fact is that this unit was made at the Moulinex factory in China and it was then sent to your country. The real cost of the food processor produced in China is several times lower than the same one manufactured in and delivered from France. When ordering goods to be produced in China the seller earns more than when producing a similar product in France. Therefore there are so many European brands in our stores, which were produced in China.

European brands produced in China

Spare parts for smartphones from China

The case of spare parts for smartphones, tablets and laptops is even more complicated. It is commonly known that almost all spare parts are produced in China. Nevertheless, to buy a spare part for Samsung or Apple here is almost impossible. Their factories are protected by all means available. Spare parts from these factories are sent to Europe, where they are distributed among branches. Therefore you can buy the Original item only in the company's official representative office.

However, the Chinese people would not be Chinese if they were not able to make money on such expensive products. They manufacture the same spare parts but not at official factories. After learning the manufacturing technology of displays, touchscreens and flat cables, the local craftsmen create a device that can make spares identical to the original. Such spare parts are considered high quality products and belong to the High Copy level.

Original PRC means that the spare part consists of original components. For example, the seller has original LCDs and doesn’t have original touchscreens. In such cases, the High Copy touchscreen is installed on the original display. Such LCD module will be classified as Original PRC because one of its components is original. There can also be another scenario. Imagine that the seller has both the original LCD and touchscreen but the customer needs a module, not a separate spare part. In this situation, a handyman sticks together the LCD and the touchscreen and here is the module. Such a spare part is called Original PRC because it’s made of original components even though it is not manufactured at the official factory. The main difference between Original PRC and Original is the place where they were made. The quality of Original PRC spares doesn’t differ from Original. Still the difference in price is significant.

(hope this helps can i plz have brainlist :D hehe)

simplify e with an exponent of in6

Answers

Answer:

Step-by-step explanation:

I think the exponent is ln6, not in6.

e^(ln 6)= 6

Other Questions
imagine holding two identical bricks in place under water. brick 1 is just beneath the surface of water, while brick 2 is held about 2 feet down. the force needed to hold brick 2 in place is Answer the following questions:1- Write SQL code to list all employees who are working more than 17 years.(2 Marks2 Write SQL code to list all assignments of employee whose first name start with the (3 Marks)3 Write SQL code to list the job description for all employees who have assignments letter "A" belong to a project that its name is "Evergreen" .4 Write PL/SQL procedure that accept the employee first name then the procedure display the number of his/her assignments. (4 Marks) (6 Marks) Case Discussion: Smithfield Custom Furniture (Part 3)It is now 2015, and Smithfields Custom Furniture has continued to grow. Its new product line of lower-priced furniture was an immediate sensation in the marketplace. The company now has 344 stores and 21,000 employees. The company now has a total of 12 international retail stores evenly divided among Spain (3), France (3), Germany (3), and England (3).Margot Smithfield, Jonas Smithfield IIIs only heir, is now running the company. She has a masters degree in design and an MBA degree. She has been running the company for 3 years.Margot Smithfield and the 12-member board of directors have been assessing an opportunity to acquire You Figure it Out, a moderately profitable 51 store chain of ultra-modern furniture. The furniture and furniture-related accessories of You Figure it Out are all made in China and sold only in the United States. Their retail stores are located in Texas (6), California (13), New York (15), Nevada (4), Florida (9), and North Carolina (4).Margot and her board have reasoned that the company has excess capacity at their 5 manufacturing plants. They are aware that producing a new line of furniture would mean retraining several hundred of their workers in the new production process. However, if this change is successfully executed it would significantly increase the profitability of the You Figure It Out brand. The company also sees a market for the ultra-modern style of furniture in Smithfields existing foreign markets and believe the current Smithfield stores in Spain, France, Germany, and England could display some of the new furniture along with their traditional lines of furniture and take orders that would be produced in the US plants. Other than that, the Smithfield Custom Furniture product line and the You Figure It Out brand would operate as they currently do.They have decided to conclude the purchase with You Figure It Out executives and want to announce the decision to their workforce as soon as possible.The Management Issue: Margot Smithfield is concerned she will overlook something important in her communications to employees and the decision making of the board.Your Task for Your Initial PostMargot Smithfield is asking for your input to help her understanding and ensure she does not overlook anything important to the success of introducing a new furniture product line to the current Smithfield product line. She has requested that you send her a single-spaced summary, using only course readings and proper citations, that addresses (in the order they are listed) the issues she believes she needs to be aware of related to communications and decision making.Explaining to her, using not more than 4 sentences, why employees need to understand the need for Smithfield to continue to be innovative.Selecting the 3 "noise" factors that are most likely to interfere with the successful launch of the new product line. Using not more than 4 sentences for each of your 3 noise factors, you will explain to Margot why you selected each of the 3 noise factors you selected, including its potential negative impact on a new product launch if it is not eliminated or reduced.Identifying for Margot Smithfield the 3 most significant obstacles to change that you believe will make the acceptance of the new product line difficult for employees to support. Using not more than 4 sentences for each obstacle to change you identified, you will explain to Margot why you selected each of the 3 obstacles to change you selected, including each obstacle's potential negative impact on a new product launch if it is not eliminated or reduced.Selecting for her and explaining, using not more than 4 sentences, the one specific change management technique or tool you think is most likely to pave the way for a successful launch of the new product line.Explaining to her, using course readings on decision making and in no more than 4 sentences, the most likely decision-making oversight the board could make in the launch of a new product line.Note: You are expected to use in-text citations and create a reference list in answering the above 5 issues.Format for Your Initial PostYou must use the following numbers and corresponding headings for each part of your response to a particular issue.1. Understanding the Need for Innovation.2. Significant "Noise" factors3. Obstacles to the Acceptance of Change4. An Effective Change Management Technique5. Possible Decision-making Oversight an entrepreneur's philosophy that all employees should be treated with respect would be best categorized as ________. the______ provided by retailers that create value for consumers are time, place, form, and possession. an underwriting commitment where the underwriter is not liable for any unsold securities is a(n): a firm commitment underwriting b bought deal c best efforts underwriting d principal relationship Sam needs to fill a cylindrical container with punch. The container hasa radius of 11 inches and a height of 18 inches. How much punch canSam fit into the container? space, tab, and newline are all called _____ characters. group of answer choices whitespace noprint space-line symbol A workstation's output is 200 bottles of wine per hour. It takes 45 minutes to receive a withdrawal kanban of corks from the previous workstation. The withdrawal kanban is attached to a container holding 30 corks. The process uses a safety factor of 20 percent. What is the number of withdrawal kanbans needed to support the bottling process?a. 4b. 5c. 6d. 3 A small patch of a catalyst surface is known to have 9 accessible adsorption sites for atoms, where only one atom can bind at each site. What is the configurational entropy, S, when two Ar atoms absorb on this patch of the surface? Give your answer to three significant figures.A) 5.91 x 10-23 J/KB) 3.99 x 10-23 J/KC) 6.07 x 10-23 J/KD) 3.03 x 10-23 J/KE) 4.95 x 10-23 J/K (5pts) Amount of cyclohexane collected in grams (5pts) Amount of toluene collected in grams (15pts) Post Lab Questions (15pts) What is the percentage by mass of cyclohexane in the mixture? Activity closes on Thursday 12/09/2021 11:59PM(CST) Data And Report Submission - Separation By Distillation (5pts) Separation by Distillation Are you completing this experiment online? Yes Data Entry 3.37 80.42 82.78 Enter the volume of the solution in mL Vapor temperature when distillation of cyclohexane started (C) Vapor temperature when distillation of cyclohexane finished (C) Volume of cyclohexane collected in mL Vapor temperature when distillation of toluene started (C) Vapor temperature when distillation of toluene finished (C) Volume of toluene collected in mL 1.83 110.98 112.13 1.54 (10pts) Calculations (5pts) Amount of cyclohexane collected in grams (5pts) Amount of toluene collected in grams (15pts) Post Lab Questions (15pts) What is the percentage by mass of cyclohexane in the mixture? a patient experienced a severe stroke 2 weeks earlier and is now in a nursing care facility. she is undergoing physical therapy but still has very little use of her left side and had difficulty swallowing. what type of diet would be appropriate? why would you use an apostrophe after the last s in a word?A. to show ownership with all plural nounsB. to show when a gerund ends in an s C. to show ownership in nouns that end with an s sound A group of students perform the single slit diffraction laboratory. The distance from the single slit to the screen is (99.131)cm. They measure the position of the first order minima in the diffraction pattern to be: m = 1, y = 0.0430 m and m = -1, y = 0.0353 m. Determine the aperture of the slit for this experiment (with uncertainty). Compare your result with the accepted value of 0.16mm. smed helps a company create a competitive edge by allowing the company to: the normal boiling point of methanol is 64.7c, and the enthalpy of vaporization is 71.8 kj/mol. what is the value of the entropy of vaporization (svap) at 64.7c? as the colonial ruler of south asia, british policies acted to discourage the region's industrial developmentTrue/False estimate the mean amount earned by a college student per month using a point estimate and a 95onfidence interval. A nuclear power plant produces an average of 3200 MW of power during a year of operation. Find the corresponding change in mass of reactor fuel over the entire year. Which is not a stage of mitosis? (Check all that apply). Group of answer choicesinterphasecytokinesisanaphasetelophasemetaphaseprophase